This addresses an issue caught by fsx where the inode size was not being
updated to the expected value after fallocate(2) with mode 0.
The problem was caused by the offset and len parameters being converted
to multiples of the file system's block size, so i_size would be rounded
up to the nearest block size multiple instead of the requested size.
This replaces the per-chunk i_size updates with a single i_size_write on
successful completion of the operation. With this patch gfs2 gets
through a complete run of fsx.
For clarity, the check for (error == 0) following the loop is removed as
all failures before that point jump to out_* labels or return.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
gfs2_fallocate wasn't checking inode_newsize_ok nor get_write_access.
Split out the context setup and inode locking pieces into a separate
function to make it more clear and add these missing calls.
inode_newsize_ok is called conditional on FALLOC_FL_KEEP_SIZE as there
is no need to enforce a file size limit if it isn't going to change.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We support user and group quotas. Tell vfs about it.
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
CC: cluster-devel@redhat.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
If we run out of blocks for a given multi-block allocation, we obviously
did not reserve enough. We should reserve more blocks for the next
reservation to reduce fragmentation. This patch increases the size hint
for reservations when they run out.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
If an application does a sequence of (1) big write, (2) little write
we don't necessarily want to reset the size hint based on the smaller
size. The fact that they did any big writes implies they may do more,
and therefore we should try to allocate bigger block reservations, even
if the last few were small writes. Therefore this patch changes function
gfs2_size_hint so that the size hint can only grow; it cannot shrink.
This is especially important where there are multiple writers.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch tries to use the journal numbers to evenly distribute
which node prefers which resource group for block allocations. This
is to help performance.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
No need to store gfs2_dir_check result and test it before returning.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Pull vfs updates from Al Viro:
"The big thing in this pile is Eric's unmount-on-rmdir series; we
finally have everything we need for that. The final piece of prereqs
is delayed mntput() - now filesystem shutdown always happens on
shallow stack.
Other than that, we have several new primitives for iov_iter (Matt
Wilcox, culled from his XIP-related series) pushing the conversion to
->read_iter()/ ->write_iter() a bit more, a bunch of fs/dcache.c
cleanups and fixes (including the external name refcounting, which
gives consistent behaviour of d_move() wrt procfs symlinks for long
and short names alike) and assorted cleanups and fixes all over the
place.
This is just the first pile; there's a lot of stuff from various
people that ought to go in this window. Starting with
unionmount/overlayfs mess... ;-/"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (60 commits)
fs/file_table.c: Update alloc_file() comment
vfs: Deduplicate code shared by xattr system calls operating on paths
reiserfs: remove pointless forward declaration of struct nameidata
don't need that forward declaration of struct nameidata in dcache.h anymore
take dname_external() into fs/dcache.c
let path_init() failures treated the same way as subsequent link_path_walk()
fix misuses of f_count() in ppp and netlink
ncpfs: use list_for_each_entry() for d_subdirs walk
vfs: move getname() from callers to do_mount()
gfs2_atomic_open(): skip lookups on hashed dentry
[infiniband] remove pointless assignments
gadgetfs: saner API for gadgetfs_create_file()
f_fs: saner API for ffs_sb_create_file()
jfs: don't hash direct inode
[s390] remove pointless assignment of ->f_op in vmlogrdr ->open()
ecryptfs: ->f_op is never NULL
android: ->f_op is never NULL
nouveau: __iomem misannotations
missing annotation in fs/file.c
fs: namespace: suppress 'may be used uninitialized' warnings
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Hhee
-----END PGP SIGNATURE-----
Merge tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux
Pull file locking related changes from Jeff Layton:
"This release is a little more busy for file locking changes than the
last:
- a set of patches from Kinglong Mee to fix the lockowner handling in
knfsd
- a pile of cleanups to the internal file lease API. This should get
us a bit closer to allowing for setlease methods that can block.
There are some dependencies between mine and Bruce's trees this cycle,
and I based my tree on top of the requisite patches in Bruce's tree"
* tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux: (26 commits)
locks: fix fcntl_setlease/getlease return when !CONFIG_FILE_LOCKING
locks: flock_make_lock should return a struct file_lock (or PTR_ERR)
locks: set fl_owner for leases to filp instead of current->files
locks: give lm_break a return value
locks: __break_lease cleanup in preparation of allowing direct removal of leases
locks: remove i_have_this_lease check from __break_lease
locks: move freeing of leases outside of i_lock
locks: move i_lock acquisition into generic_*_lease handlers
locks: define a lm_setup handler for leases
locks: plumb a "priv" pointer into the setlease routines
nfsd: don't keep a pointer to the lease in nfs4_file
locks: clean up vfs_setlease kerneldoc comments
locks: generic_delete_lease doesn't need a file_lock at all
nfsd: fix potential lease memory leak in nfs4_setlease
locks: close potential race in lease_get_mtime
security: make security_file_set_fowner, f_setown and __f_setown void return
locks: consolidate "nolease" routines
locks: remove lock_may_read and lock_may_write
lockd: rip out deferred lock handling from testlock codepath
NFSD: Get reference of lockowner when coping file_lock
...
hashed dentry can be passed to ->atomic_open() only if
a) it has just passed revalidation and
b) it's negative
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that check_submounts_and_drop can not fail and is called from
d_invalidate there is no longer a need to call check_submounts_and_drom
from filesystem d_revalidate methods so remove it.
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch speeds up GFS2 unlink operations by using function
gfs2_rbm_incr rather than continuously calculating the rbm.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes a regression in the patch "GFS2: Remember directory
insert point", commit 2b47dad866.
The problem had to do with the rename function: The function found
space for the new dirent, and remembered that location. But then the
old dirent was removed, which often moved the eligible location for
the renamed dirent. Putting the new dirent at the saved location
caused file system corruption.
This patch adds a new "save_loc" variable to struct gfs2_diradd.
If 1, the dirent location is saved. If 0, the dirent location is not
saved and the buffer_head is released as per previous behavior.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch checks if i_goal is either zero or if doesn't exist
within any rgrp (i.e gfs2_blk2rgrpd() returns NULL). If so, it
assigns the ip->i_no_addr block as the i_goal.
There are two scenarios where a bad i_goal can result in a
-EBADSLT error.
1. Attempting to allocate to an existing inode:
Control reaches gfs2_inplace_reserve() and ip->i_goal is bad.
We need to fix i_goal here.
2. A new inode is created in a directory whose i_goal is hosed:
In this case, the parent dir's i_goal is copied onto the new
inode. Since the new inode is not yet created, the ip->i_no_addr
field is invalid and so, the fix in gfs2_inplace_reserve() as per
1) won't work in this scenario. We need to catch and fix it sooner
in the parent dir itself (gfs2_create_inode()), before it is
copied to the new inode.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Callers of d_splice_alias(dentry, inode) don't need iput(), neither
on success nor on failure. Either the reference to inode is stored
in a previously negative dentry, or it's dropped. In either case
inode reference the caller used to hold is consumed.
__gfs2_lookup() does iput() in case when d_splice_alias() has failed.
Double iput() if we ever hit that. And gfs2_create_inode() ends up
not only with double iput(), but with link count dropped to zero - on
an inode it has just found in directory.
Cc: stable@vger.kernel.org # v3.14+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
MAXQUOTAS value defines maximum number of quota types VFS supports.
This isn't necessarily the number of types gfs2 supports and with
addition of project quotas these two numbers stop matching. So make gfs2
use its private definition.
CC: cluster-devel@redhat.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix a regression introduced by:
6d4ade986f GFS2: Add atomic_open support
where an early return misses d_splice_alias() which had been
adding the negative dentry.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2 and NFS have setlease routines that always just return -EINVAL.
Turn that into a generic routine that can live in fs/libfs.c.
Cc: <linux-nfs@vger.kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: <cluster-devel@redhat.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This patch changes the flock code so that it uses the TRY_1CB flag
instead of the TRY flag on the first attempt. That forces any holding
nodes to issue a dlm callback, which requests a demote of the glock.
Then, if the "try" failed, it sleeps a small amount of time for the
demote to occur. Then it tries again, for an increasing amount of time.
Subsequent attempts to gain the "try" lock don't use "_1CB" so that
only one callback is issued.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch changes some variables (especially maxlen in function
gfs2_block_map) from unsigned int to size_t. We need 64-bit arithmetic
for very large files (e.g. 1PB) where the variables otherwise get
shifted to all 0's.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch removes the GLF_NOCACHE flag from the glocks associated with
flocks. There should be no good reason not to cache glocks for flocks:
they only force the glock to be demoted before they can be reacquired,
which can slow down performance and even cause glock hangs, especially
in cases where the flocks are held in Shared (SH) mode.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch allows flock glocks to use a non-blocking dequeue rather
than dq_wait. It also reverts the previous patch I had posted regarding
dq_wait. The reverted patch isn't necessarily a bad idea, but I decided
this might avoid unforeseen side effects, and was therefore safer.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Normally GFP_KERNEL is ok here, but there is now a rarely used code path
relating to deallocation of unlinked inodes (in certain corner cases)
which if hit at times of memory shortage can cause recursion while
trying to free memory.
One solution would be to try and move the gfs2_glock_get() call so
that it is no longer called while another glock is held, but that
doesn't look at all easy, so GFP_NOFS is the best solution for the
time being.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We must not leave items on the LRU list with GLF_LOCK set, since
they can be removed if the glock is brought back into use, which
may then potentially result in a hang, waiting for GLF_LOCK to
clear.
It doesn't happen very often, since it requires a glock that has
not been used for a long time to be brought back into use at the
same moment that the shrinker is part way through disposing of
glocks.
The fix is to set GLF_LOCK at a later time, when we already know
that the other locks can be obtained. Also, we now only release
the lru_lock in case a resched is needed, rather than on every
iteration.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Function gfs2_glock_dq_wait is supposed to dequeue a glock and then
wait for the lock to be demoted. The problem is, if this is a shared
lock, its demote will depend on the other holders, which means you
might end up waiting forever because the other process is blocked.
This problem is especially apparent when dealing with nested flocks.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The current "wait_on_bit" interface requires an 'action'
function to be provided which does the actual waiting.
There are over 20 such functions, many of them identical.
Most cases can be satisfied by one of just two functions, one
which uses io_schedule() and one which just uses schedule().
So:
Rename wait_on_bit and wait_on_bit_lock to
wait_on_bit_action and wait_on_bit_lock_action
to make it explicit that they need an action function.
Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io
which are *not* given an action function but implicitly use
a standard one.
The decision to error-out if a signal is pending is now made
based on the 'mode' argument rather than being encoded in the action
function.
All instances of the old wait_on_bit and wait_on_bit_lock which
can use the new version have been changed accordingly and their
action functions have been discarded.
wait_on_bit{_lock} does not return any specific error code in the
event of a signal so the caller must check for non-zero and
interpolate their own error code as appropriate.
The wait_on_bit() call in __fscache_wait_on_invalidate() was
ambiguous as it specified TASK_UNINTERRUPTIBLE but used
fscache_wait_bit_interruptible as an action function.
David Howells confirms this should be uniformly
"uninterruptible"
The main remaining user of wait_on_bit{,_lock}_action is NFS
which needs to use a freezer-aware schedule() call.
A comment in fs/gfs2/glock.c notes that having multiple 'action'
functions is useful as they display differently in the 'wchan'
field of 'ps'. (and /proc/$PID/wchan).
As the new bit_wait{,_io} functions are tagged "__sched", they
will not show up at all, but something higher in the stack. So
the distinction will still be visible, only with different
function names (gds2_glock_wait versus gfs2_glock_dq_wait in the
gfs2/glock.c case).
Since first version of this patch (against 3.15) two new action
functions appeared, on in NFS and one in CIFS. CIFS also now
uses an action function that makes the same freezer aware
schedule call as NFS.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: David Howells <dhowells@redhat.com> (fscache, keys)
Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2)
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull vfs updates from Al Viro:
"This the bunch that sat in -next + lock_parent() fix. This is the
minimal set; there's more pending stuff.
In particular, I really hope to get acct.c fixes merged this cycle -
we need that to deal sanely with delayed-mntput stuff. In the next
pile, hopefully - that series is fairly short and localized
(kernel/acct.c, fs/super.c and fs/namespace.c). In this pile: more
iov_iter work. Most of prereqs for ->splice_write with sane locking
order are there and Kent's dio rewrite would also fit nicely on top of
this pile"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
lock_parent: don't step on stale ->d_parent of all-but-freed one
kill generic_file_splice_write()
ceph: switch to iter_file_splice_write()
shmem: switch to iter_file_splice_write()
nfs: switch to iter_splice_write_file()
fs/splice.c: remove unneeded exports
ocfs2: switch to iter_file_splice_write()
->splice_write() via ->write_iter()
bio_vec-backed iov_iter
optimize copy_page_{to,from}_iter()
bury generic_file_aio_{read,write}
lustre: get rid of messing with iovecs
ceph: switch to ->write_iter()
ceph_sync_direct_write: stop poking into iov_iter guts
ceph_sync_read: stop poking into iov_iter guts
new helper: copy_page_from_iter()
fuse: switch to ->write_iter()
btrfs: switch to ->write_iter()
ocfs2: switch to ->write_iter()
xfs: switch to ->write_iter()
...
iter_file_splice_write() - a ->splice_write() instance that gathers the
pipe buffers, builds a bio_vec-based iov_iter covering those and feeds
it to ->write_iter(). A bunch of simple cases coverted to that...
[AV: fixed the braino spotted by Cyrill]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
aops->write_begin may allocate a new page and make it visible only to have
mark_page_accessed called almost immediately after. Once the page is
visible the atomic operations are necessary which is noticable overhead
when writing to an in-memory filesystem like tmpfs but should also be
noticable with fast storage. The objective of the patch is to initialse
the accessed information with non-atomic operations before the page is
visible.
The bulk of filesystems directly or indirectly use
grab_cache_page_write_begin or find_or_create_page for the initial
allocation of a page cache page. This patch adds an init_page_accessed()
helper which behaves like the first call to mark_page_accessed() but may
called before the page is visible and can be done non-atomically.
The primary APIs of concern in this care are the following and are used
by most filesystems.
find_get_page
find_lock_page
find_or_create_page
grab_cache_page_nowait
grab_cache_page_write_begin
All of them are very similar in detail to the patch creates a core helper
pagecache_get_page() which takes a flags parameter that affects its
behavior such as whether the page should be marked accessed or not. Then
old API is preserved but is basically a thin wrapper around this core
function.
Each of the filesystems are then updated to avoid calling
mark_page_accessed when it is known that the VM interfaces have already
done the job. There is a slight snag in that the timing of the
mark_page_accessed() has now changed so in rare cases it's possible a page
gets to the end of the LRU as PageReferenced where as previously it might
have been repromoted. This is expected to be rare but it's worth the
filesystem people thinking about it in case they see a problem with the
timing change. It is also the case that some filesystems may be marking
pages accessed that previously did not but it makes sense that filesystems
have consistent behaviour in this regard.
The test case used to evaulate this is a simple dd of a large file done
multiple times with the file deleted on each iterations. The size of the
file is 1/10th physical memory to avoid dirty page balancing. In the
async case it will be possible that the workload completes without even
hitting the disk and will have variable results but highlight the impact
of mark_page_accessed for async IO. The sync results are expected to be
more stable. The exception is tmpfs where the normal case is for the "IO"
to not hit the disk.
The test machine was single socket and UMA to avoid any scheduling or NUMA
artifacts. Throughput and wall times are presented for sync IO, only wall
times are shown for async as the granularity reported by dd and the
variability is unsuitable for comparison. As async results were variable
do to writback timings, I'm only reporting the maximum figures. The sync
results were stable enough to make the mean and stddev uninteresting.
The performance results are reported based on a run with no profiling.
Profile data is based on a separate run with oprofile running.
async dd
3.15.0-rc3 3.15.0-rc3
vanilla accessed-v2
ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%)
tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%)
btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%)
ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%)
xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%)
The XFS figure is a bit strange as it managed to avoid a worst case by
sheer luck but the average figures looked reasonable.
samples percentage
ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed
tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
[akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is probably also the first one without a single patch from me. That
is down to a combination of factors, and I have some things in the works
that are not quite ready yet, that I hope to put in next time around.
Returning to what is here this time... we have 3 patches which fix
various warnings. Two are bug fixes (for quotas and also a
rare recovery race condition). The final patch, from Ben Marzinski,
is an important change in the freeze code which has been in
progress for some time. This removes the need to take and drop the
transaction lock for every single transaction, when the only time it
was used, was at file system freeze time. Ben's patch integrates the
freeze operation into the journal flush code as an alternative with
lower overheads and also lands up resolving some difficult to fix races
at the same time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=x9iK
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw into next
Pull gfs2 updates from Steven Whitehouse:
"This must be about the smallest merge window patch set ever for GFS2.
It is probably also the first one without a single patch from me.
That is down to a combination of factors, and I have some things in
the works that are not quite ready yet, that I hope to put in next
time around.
Returning to what is here this time... we have 3 patches which fix
various warnings. Two are bug fixes (for quotas and also a rare
recovery race condition). The final patch, from Ben Marzinski, is an
important change in the freeze code which has been in progress for
some time. This removes the need to take and drop the transaction
lock for every single transaction, when the only time it was used, was
at file system freeze time. Ben's patch integrates the freeze
operation into the journal flush code as an alternative with lower
overheads and also lands up resolving some difficult to fix races at
the same time"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Prevent recovery before the local journal is set
GFS2: fs/gfs2/file.c: kernel-doc warning fixes
GFS2: fs/gfs2/bmap.c: kernel-doc warning fixes
GFS2: remove transaction glock
GFS2: lops.c: replace 0 by NULL for pointers
GFS2: quotas not being refreshed in gfs2_adjust_quota
This patch uses a completion to prevent dlm's recovery process from
referencing and trying to recover a journal before a journal has been
opened.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Related function is not gfs2_set_flags but do_gfs2_set_flags
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix 2 typos and move one definition which was between function
comments and function definition (yet another kernel-doc warning)
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2 has a transaction glock, which must be grabbed for every
transaction, whose purpose is to deal with freezing the filesystem.
Aside from this involving a large amount of locking, it is very easy to
make the current fsfreeze code hang on unfreezing.
This patch rewrites how gfs2 handles freezing the filesystem. The
transaction glock is removed. In it's place is a freeze glock, which is
cached (but not held) in a shared state by every node in the cluster
when the filesystem is mounted. This lock only needs to be grabbed on
freezing, and actions which need to be safe from freezing, like
recovery.
When a node wants to freeze the filesystem, it grabs this glock
exclusively. When the freeze glock state changes on the nodes (either
from shared to unlocked, or shared to exclusive), the filesystem does a
special log flush. gfs2_log_flush() does all the work for flushing out
the and shutting down the incore log, and then it tries to grab the
freeze glock in a shared state again. Since the filesystem is stuck in
gfs2_log_flush, no new transaction can start, and nothing can be written
to disk. Unfreezing the filesytem simply involes dropping the freeze
glock, allowing gfs2_log_flush() to grab and then release the shared
lock, so it is cached for next time.
However, in order for the unfreezing ioctl to occur, gfs2 needs to get a
shared lock on the filesystem root directory inode to check permissions.
If that glock has already been grabbed exclusively, fsfreeze will be
unable to get the shared lock and unfreeze the filesystem.
In order to allow the unfreeze, this patch makes gfs2 grab a shared lock
on the filesystem root directory during the freeze, and hold it until it
unfreezes the filesystem. The functions which need to grab a shared
lock in order to allow the unfreeze ioctl to be issued now use the lock
grabbed by the freeze code instead.
The freeze and unfreeze code take care to make sure that this shared
lock will not be dropped while another process is using it.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Sparse warning: fs/gfs2/lops.c:78:29:
"warning: Using plain integer as NULL pointer"
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Old values of user quota limits were being used and
could allow users to exceed their allotted quotas.
This patch refreshes the limits to the latest values
so that quotas are enforced correctly.
Resolves: rhbz#1077463
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
filemap_map_pages() is generic implementation of ->map_pages() for
filesystems who uses page cache.
It should be safe to use filemap_map_pages() for ->map_pages() if
filesystem use filemap_fault() for ->fault().
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ning Qu <quning@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
and COLLAPSE_RANGE fallocate operations, and scalability improvements
in the jbd2 layer and in xattr handling when the extended attributes
spill over into an external block.
Other than that, the usual clean ups and minor bug fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=4s1Z
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Major changes for 3.14 include support for the newly added ZERO_RANGE
and COLLAPSE_RANGE fallocate operations, and scalability improvements
in the jbd2 layer and in xattr handling when the extended attributes
spill over into an external block.
Other than that, the usual clean ups and minor bug fixes"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
ext4: fix premature freeing of partial clusters split across leaf blocks
ext4: remove unneeded test of ret variable
ext4: fix comment typo
ext4: make ext4_block_zero_page_range static
ext4: atomically set inode->i_flags in ext4_set_inode_flags()
ext4: optimize Hurd tests when reading/writing inodes
ext4: kill i_version support for Hurd-castrated file systems
ext4: each filesystem creates and uses its own mb_cache
fs/mbcache.c: doucple the locking of local from global data
fs/mbcache.c: change block and index hash chain to hlist_bl_node
ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
ext4: refactor ext4_fallocate code
ext4: Update inode i_size after the preallocation
ext4: fix partial cluster handling for bigalloc file systems
ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
ext4: only call sync_filesystm() when remounting read-only
fs: push sync_filesystem() down to the file system's remount_fs()
jbd2: improve error messages for inconsistent journal heads
jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
jbd2: minimize region locked by j_list_lock in journal_get_create_access()
...
but instead the widening contributor base. It is good to see that
interest is increasing in GFS2, and I'd like to thank all the
contributors to this patch set.
In addition to the usual set of bug fixes and clean ups, there are
patches to improve inode creation performance when xattrs are
required and some improvements to the transaction code which is
intended to help improve scalability after further changes in due
course.
Journal extent mapping is also updated to make it more efficient
and again, this is a foundation for future work in this area.
The maximum number of ACLs has been increased to 300 (for a 4k
block size) which means that even with a few additional xattrs
from selinux, everything should fit within a single fs block.
There is also a patch to bring GFS2's own copy of the writepages
code up to the same level as the core VFS. Eventually we may be
able to merge some of this code, since it is fairly similar.
The other major change this time, is bringing consistency to
the printing of messages via fs_<level>, pr_<level> macros.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=IWmZ
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull GFS2 updates from Steven Whitehouse:
"One of the main highlights this time, is not the patches themselves
but instead the widening contributor base. It is good to see that
interest is increasing in GFS2, and I'd like to thank all the
contributors to this patch set.
In addition to the usual set of bug fixes and clean ups, there are
patches to improve inode creation performance when xattrs are required
and some improvements to the transaction code which is intended to
help improve scalability after further changes in due course.
Journal extent mapping is also updated to make it more efficient and
again, this is a foundation for future work in this area.
The maximum number of ACLs has been increased to 300 (for a 4k block
size) which means that even with a few additional xattrs from selinux,
everything should fit within a single fs block.
There is also a patch to bring GFS2's own copy of the writepages code
up to the same level as the core VFS. Eventually we may be able to
merge some of this code, since it is fairly similar.
The other major change this time, is bringing consistency to the
printing of messages via fs_<level>, pr_<level> macros"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (29 commits)
GFS2: Fix address space from page function
GFS2: Fix uninitialized VFS inode in gfs2_create_inode
GFS2: Fix return value in slot_get()
GFS2: inline function gfs2_set_mode
GFS2: Remove extraneous function gfs2_security_init
GFS2: Increase the max number of ACLs
GFS2: Re-add a call to log_flush_wait when flushing the journal
GFS2: Ensure workqueue is scheduled after noexp request
GFS2: check NULL return value in gfs2_ok_to_move
GFS2: Convert gfs2_lm_withdraw to use fs_err
GFS2: Use fs_<level> more often
GFS2: Use pr_<level> more consistently
GFS2: Move recovery variables to journal structure in memory
GFS2: global conversion to pr_foo()
GFS2: return -E2BIG if hit the maximum limits of ACLs
GFS2: Clean up journal extent mapping
GFS2: replace kmalloc - __vmalloc / memset 0
GFS2: Remove extra "if" in gfs2_log_flush()
fs: NULL dereference in posix_acl_to_xattr()
GFS2: Move log buffer accounting to transaction
...
Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page. As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently. At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.
Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate. Reclaim will check
for this flag before installing shadow pages.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that rgrps use the address space which is part of the super
block, we need to update gfs2_mapping2sbd() to take account of
that. The only way to do that easily is to use a different set
of address_space_operations for rgrps.
Reported-by: Abhi Das <adas@redhat.com>
Tested-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When gfs2_create_inode() fails due to quota violation, the VFS
inode is not completely uninitialized. This can cause a list
corruption error.
This patch correctly uninitializes the VFS inode when a quota
violation occurs in the gfs2_create_inode codepath.
Resolves: rhbz#1059808
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
ENOSPC was being returned in slot_get inspite of successful
execution of the function. This patch fixes this return
code.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Here is a revised patch based on Steve's feedback:
This patch eliminates function gfs2_set_mode which was only called in
one place, and always returned 0.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch eliminates function gfs2_security_init in favor of just
calling security_inode_init_security directly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch increases the maximum number of ACLs from 25 to 300 for
a 4K block size. The value is adjusted accordingly if the block size
is smaller. Note that this is an arbitrary limit with a performance
tradeoff, and that the physical limit is slightly over 500.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Upstream commit 34cc178 changed a line of code from calling function
log_flush_commit to calling log_write_header. This had the effect of
eliminating a call to function log_flush_wait. That causes the journal
to skip over log headers, which results in multiple wrap points,
which itself leads to infinite loops in journal replay, both in the
kernel code and fsck.gfs2 code. This patch re-adds that call.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch closes a small timing window whereby a request to hold the
transaction glock can get stuck. The problem is that after the DLM has
granted the lock, it can get into a state whereby it doesn't transition
the glock to a held state, due to not having requeued the glock state
machine to finish the transition.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
gfs2_lookupi() can return NULL if the path to the root is broken by
another rename/rmdir. In this case gfs2_ok_to_move() must check for
this NULL pointer and return error.
Resolves: rhbz#1060246
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
vprintk use is not prefixed by a KERN_<LEVEL>,
so emit these messages at KERN_ERR level.
Using %pV can save some code and allow fs_err to
be used, so do it.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Convert a couple of uses of pr_<level> to fs_<level>
Add and use fs_emerg.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Add pr_fmt, remove embedded "GFS2: " prefixes.
This now consistently emits lower case "gfs2: " for each message.
Other miscellanea around these changes:
o Add missing newlines
o Coalesce formats
o Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
If multiple nodes fail and their recovery work runs simultaneously, they
would use the same unprotected variables in the superblock. For example,
they would stomp on each other's revoked blocks lists, which resulted
in file system metadata corruption. This patch moves the necessary
variables so that each journal has its own separate area for tracking
its journal replay.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-All printk(KERN_foo converted to pr_foo().
-Messages updated to fit in 80 columns.
-fs_macros converted as well.
-fs_printk removed.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Return -E2BIG rather than -EINVAL if hit the maximum size limits of
ACLs, as the former errno is consistent with VFS xattr syscalls.
This is pointed out by Dave Chinner in previous discussion thread:
http://www.spinics.net/lists/linux-fsdevel/msg71125.html
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes a long standing issue in mapping the journal
extents. Most journals will consist of only a single extent,
and although the cache took account of that by merging extents,
it did not actually map large extents, but instead was doing a
block by block mapping. Since the journal was only being mapped
on mount, this was not normally noticeable.
With the updated code, it is now possible to use the same extent
mapping system during journal recovery (which will be added in a
later patch). This will allow checking of the integrity of the
journal before any reply of the journal content is attempted. For
this reason the code is moving to bmap.c, since it will be used
more widely in due course.
An exercise left for the reader is to compare the new function
gfs2_map_journal_extents() with gfs2_write_alloc_required()
Additionally, should there be a failure, the error reporting is
also updated to show more detail about what went wrong.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Use kzalloc and __vmalloc __GFP_ZERO for clean sd_quota_bitmap allocation.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
By reordering some of the assignments in gfs2_log_flush() it
is possible to remove one of the "if" statements as it can be
merged with one higher up the function.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Now we have a master transaction into which other transactions
are merged, the accounting can be done using this master
transaction. We no longer require the superblock fields which
were being used for this function.
In addition, this allows for a clean up in calc_reserved()
making it rather easier understand. Also, by reducing the
number of variables used to track the buffers being added
and removed from the journal, a number of error checks are
now no longer required.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Over time, we hope to be able to improve the concurrency available
in the log code. This is one small step towards that, by moving
the buffer lists from the super block, and into the transaction
structure, so that each transaction builds its own buffer lists.
At transaction commit time, the buffer lists are merged into
the currently accumulating transaction. That transaction then
is passed into the before and after commit functions at journal
flush time. Thus there should be no change in overall behaviour
yet.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
A couple of "int" fields were being used as boolean values
so we can make them bitfields of one bit, and put them in
what might otherwise be a hole in the structure with 64
bit alignment.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Mark functions as static in gfs2/rgrp.c because they are not used
outside this file.
This eliminates the following warning in gfs2/rgrp.c:
fs/gfs2/rgrp.c:1092:5: warning: no previous prototype for ‘gfs2_rgrp_bh_get’ [-Wmissing-prototypes]
fs/gfs2/rgrp.c:1157:5: warning: no previous prototype for ‘update_rgrp_lvb’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The intent of this new field in the directory entry is to
allow a subsequent lookup to know how many blocks, which
are contiguous with the inode, contain metadata which relates
to the inode. This will then allow the issuing of a single
read to read these blocks, rather than reading the inode
first, and then issuing a second read for the metadata.
This only works under some fairly strict conditions, since
we do not have back pointers from inodes to directory entries
we must ensure that the blocks referenced in this way will
always belong to the inode.
This rules out being able to use this system for indirect
blocks, as these can change as a result of truncate/rewrite.
So the idea here is to restrict this to xattr blocks only
for the time being. For most inodes, that means only a
single block. Also, when using ACLs and/or SELinux or
other LSMs, these will be added at inode creation time
so that they will be contiguous with the inode on disk and
also will almost always be needed when we read the inode in
for permissions checks.
Once an xattr block for an inode is allocated, it will never
change until the inode is deallocated.
This patch adds the new field, a further patch will add the
readahead in due course.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch causes GFS2 to lock the i_mutex during fallocate. It
also switches from using a dinode's inode glock to using a local
holder like the other GFS2 i_operations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2 has carried what is more or less a copy of the
write_cache_pages() for some time. It seems that this
copy has slipped behind the core code over time. This
patch brings it back uptodate, and in addition adds the
tracepoint which would otherwise be missing.
We could go further, and eliminate some or all of the
code duplication here. The issue is that if we do that,
then the function we need to split out from the existing
write_cache_pages(), which will look a lot like
gfs2_jdata_write_pagevec(), would land up putting quite a
lot of extra variables on the stack. I know that has been
a problem in the past in the writeback code path, which
is why I've hesitated to do it here.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is another step towards improving the allocation of xattr
blocks at inode allocation time. Here we take advantage of
Christoph's recent work on ACLs to allocate a block for the
xattrs early if we know that we will be adding ACLs to the
inode later on. The advantage of that is that it is much
more likely that we'll get a contiguous run of two blocks
where the first is the inode and the second is the xattr block.
We still have to fall back to the original system in case we
don't get the requested two contiguous blocks, or in case the
ACLs are too large to fit into the block.
Future patches will move more of the ACL setting code further
up the gfs2_inode_create() function. Also, I'd like to be
able to do the same thing with the xattrs from LSMs in
due course, too. That way we should be able to slowly reduce
the number of independent transactions, at least in the
most common cases.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When we do a flush of the AIL list, we are writing out what is
likely to be a lot of small I/Os, which are possibly in an order
which is not ideal performance-wise. Since this is done by calling
filemap_fdatatwrite for each individual inode's address space there
is no overall plugging going on.
In addition to that, we do not always wait for AIL i/o when we flush
it, so that it is possible for things to get left behind on the queue.
By adding explicit plugging here, we reduce the chances of this
being an issues. A quick test using the AIL flush tracepoint shows a
small, but measurable improvement.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Pull core block IO changes from Jens Axboe:
"The major piece in here is the immutable bio_ve series from Kent, the
rest is fairly minor. It was supposed to go in last round, but
various issues pushed it to this release instead. The pull request
contains:
- Various smaller blk-mq fixes from different folks. Nothing major
here, just minor fixes and cleanups.
- Fix for a memory leak in the error path in the block ioctl code
from Christian Engelmayer.
- Header export fix from CaiZhiyong.
- Finally the immutable biovec changes from Kent Overstreet. This
enables some nice future work on making arbitrarily sized bios
possible, and splitting more efficient. Related fixes to immutable
bio_vecs:
- dm-cache immutable fixup from Mike Snitzer.
- btrfs immutable fixup from Muthu Kumar.
- bio-integrity fix from Nic Bellinger, which is also going to stable"
* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
xtensa: fixup simdisk driver to work with immutable bio_vecs
block/blk-mq-cpu.c: use hotcpu_notifier()
blk-mq: for_each_* macro correctness
block: Fix memory leak in rw_copy_check_uvector() handling
bio-integrity: Fix bio_integrity_verify segment start bug
block: remove unrelated header files and export symbol
blk-mq: uses page->list incorrectly
blk-mq: use __smp_call_function_single directly
btrfs: fix missing increment of bi_remaining
Revert "block: Warn and free bio if bi_end_io is not set"
block: Warn and free bio if bi_end_io is not set
blk-mq: fix initializing request's start time
block: blk-mq: don't export blk_mq_free_queue()
block: blk-mq: make blk_sync_queue support mq
block: blk-mq: support draining mq queue
dm cache: increment bi_remaining when bi_end_io is restored
block: fixup for generic bio chaining
block: Really silence spurious compiler warnings
block: Silence spurious compiler warnings
block: Kill bio_pair_split()
...
Pull vfs updates from Al Viro:
"Assorted stuff; the biggest pile here is Christoph's ACL series. Plus
assorted cleanups and fixes all over the place...
There will be another pile later this week"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (43 commits)
__dentry_path() fixes
vfs: Remove second variable named error in __dentry_path
vfs: Is mounted should be testing mnt_ns for NULL or error.
Fix race when checking i_size on direct i/o read
hfsplus: remove can_set_xattr
nfsd: use get_acl and ->set_acl
fs: remove generic_acl
nfs: use generic posix ACL infrastructure for v3 Posix ACLs
gfs2: use generic posix ACL infrastructure
jfs: use generic posix ACL infrastructure
xfs: use generic posix ACL infrastructure
reiserfs: use generic posix ACL infrastructure
ocfs2: use generic posix ACL infrastructure
jffs2: use generic posix ACL infrastructure
hfsplus: use generic posix ACL infrastructure
f2fs: use generic posix ACL infrastructure
ext2/3/4: use generic posix ACL infrastructure
btrfs: use generic posix ACL infrastructure
fs: make posix_acl_create more useful
fs: make posix_acl_chmod more useful
...
This contains some major refactoring for the create path so that
inodes are created with the right mode to start with instead of
fixing it up later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rename the current posix_acl_created to __posix_acl_create and add
a fully featured helper to set up the ACLs on file creation that
uses get_acl().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rename the current posix_acl_chmod to __posix_acl_chmod and add
a fully featured ACL chmod helper that uses the ->set_acl inode
operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
0d0d110720 asserts that "d_splice_alias()
can't return error unless it was given an IS_ERR(inode)".
That was true of the implementation of d_splice_alias, but this is
really a problem with d_splice_alias: at a minimum it should be able to
return -ELOOP in the case where inserting the given dentry would cause a
directory loop.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is a small cleanup to function gfs2_rgrp_go_lock so that it
uses rgd instead of its more complicated twin.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Al Viro has tactfully pointed out that we are using the incorrect
error code in some cases. This patch fixes that, and also removes
the (unused) return value for glock dumping.
> * gfs2_iget() - ENOBUFS instead of ENOMEM. ENOBUFS is
> "No buffer space available (POSIX.1 (XSI STREAMS option))" and since
> we don't support STREAMS it's probably fair game, but... what the hell?
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Well I don't get the same warning locally as the kbuild
robot, but I guess this should fix the problem, anyway.
Here is the warning:
head: 2d9e72303d
commit: ee2411a8db [19/20] GFS2: Clean up quota slot allocation
config: make ARCH=powerpc allmodconfig
All error/warnings:
fs/gfs2/quota.c: In function 'gfs2_quota_init':
>> fs/gfs2/quota.c:1246:3: error: implicit declaration of function '__vmalloc' [-Werror=implicit-function-declaration]
sdp->sd_quota_bitmap = __vmalloc(bm_size, GFP_NOFS, PAGE_KERNEL);
^
>> fs/gfs2/quota.c:1246:24: warning: assignment makes pointer from integer without a cast [enabled by default]
sdp->sd_quota_bitmap = __vmalloc(bm_size, GFP_NOFS, PAGE_KERNEL);
^
fs/gfs2/quota.c: In function 'gfs2_quota_cleanup':
>> fs/gfs2/quota.c:1361:4: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration]
vfree(sdp->sd_quota_bitmap);
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Gradually, the global qd_lock is being used for less and less.
After this patch it will only be used for the per super block
list whose purpose is to allow syncing of changes back to the
master quota file from the local quota changes file. Fixing
up that process to make it more efficient will be the subject
of a later patch, however this patch removes another barrier
to doing that.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
Quota slot allocation has historically used a vector of pages
and a set of homegrown find/test/set/clear bit functions. Since
the size of the bitmap is likely to be based on the default
qc file size, thats a couple of pages at most. So we ought
to be able to allocate that as a single chunk, with a vmalloc
fallback, just in case of memory fragmentation.
We are then able to use the kernel's own find/test/set/clear
bit functions, rather than rolling our own.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
While investigating a rather strange bit of code in the quota
clean up function, I spotted that the reason for its existence
was that when remounting read only, we were not stopping the
quotad thread, and thus it was possible for it to still have
a reference to some of the quotas in that case.
This patch moves the logd and quota thread start and stop into
the make_fs_rw/ro functions, so that we now stop those threads
when mounted read only.
This means that quotad will always be stopped before we call
the quota clean up function, and we can thus dispose of the
(rather hackish) code that waits for it to give up its
reference on the quotas.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
Prior to this patch, GFS2 kept all the quotas for each
super block in a single linked list. This is rather slow
when there are large numbers of quotas.
This patch introduces a hlist_bl based hash table, similar
to the one used for glocks. The initial look up of the quota
is now lockless in the case where it is already cached,
although we still have to take the per quota spinlock in
order to bump the ref count. Either way though, this is a
big improvement on what was there before.
The qd_lock and the per super block list is preserved, for
the time being. However it is intended that since this is no
longer used for its original role, it should be possible to
shrink the number of items on that list in due course and
remove the requirement to take qd_lock in qd_get.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
We recently fixed the writeback of pages prior to performing
direct i/o, however the initial fix was perhaps a bit heavy
handed. There is no need to invalidate pages if the direct i/o
is only a read, since they will be identical to what has been
flushed to disk anyway.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Spotted by Andy Price. This should fix the odd messages from
lockdep caused by 70d4ee94b3
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Price <anprice@redhat.com>
This patch adds four new fields to directory leaf blocks.
The intent is not to use them in the kernel itself, although
perhaps we may be able to use them as hints at some later date,
but instead to provide more information for debug/fsck use.
One new field adds a pointer to the inode to which the leaf
belongs. This can be useful if the pointer to the leaf block
has become corrupt, as it will allow us to know which inode
this block should be associated with. This field is set when
the leaf is created and never changed over its lifetime.
The second field is a "distance from the hash table" field.
The meaning is as follows:
0 = An old leaf in which this value has not been set
1 = This leaf is pointed to directly from the hash table
2+ = This leaf is part of a chain, pointed to by another leaf
block, the value gives the position in the chain.
The third and fourth fields combine to give a time stamp of
the most recent directory insertion or deletion from this
leaf block. The time stamp is not updated when a new leaf
block is chained from the current one. The code is currently
written such that the timestamp on the dir inode will match
that of the leaf block for the most recent insertion/deletion.
For backwards compatibility, any of these new fields which is
zero should be considered to be "unknown".
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
For most cases, only a single new block is needed when we reach
the point of converting from stuffed to exhash directory. The
exception being when the file name is so long that it will not
fit within the new leaf block.
So this patch adds a simple test for that situation so that we
do not need to request the full reservation size in this case.
Potentially we could calculate more accurately the value to use
in other cases too, but that is much more complicated to do and
it is doubtful that the benefit would outweigh the extra cost
in code complexity.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch calls get_write_access in function gfs2_setattr_chown,
which merely increases inode->i_writecount for the duration of the
function. That will ensure that any file closes won't delete the
inode's multi-block reservation while the function is running.
It also ensures that a multi-block reservation exists when needed
for quota change operations during the chown.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When we look to see if there is enough space to add a dir
entry without allocation, we have then been repeating the
same search later when we do the actual insertion. This
patch caches the details of the location in the gfs2_diradd
structure, so that we do not have to repeat the search.
This will provide a performance improvement which will be
greater as the size of the directory increases.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There are three cases where we need to calculate the number of
blocks to reserve in a transaction involving linking an inode
into a directory. The one in rename is a bit more complicated,
but the basis of it is the same as for link and create. So it
makes sense to move this calculation into a single function
rather than repeating it three times.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The intent is that this structure will hold the information
required when adding entries to a directory (linking). To
start with, it will contain only the number of blocks which
are required to link the new entry into the directory. The
current calculation returns either 0 or the maximim number of
blocks that can ever be requested by such a transaction.
The intent is that in a later patch, we can update the dir
code to calculate this value more accurately. In addition
further patches will also add further fields to the new
structure to increase its utility.
In addition this patch fixes a bug where the link used during
inode creation was adding requesting too many blocks in
some cases. This is harmless unless the fs is close to being
full.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Prior to this patch, GFS2 had one address space for each rgrp,
stored in the glock. This patch changes them to use a single
address space in the super block. This therefore saves
(sizeof(struct address_space) * nr_of_rgrps) bytes of memory
and for large filesystems, that can be significant.
It would be nice to be able to do something similar and merge
the inode metadata address space into the same global
address space. However, that is rather more complicated as the
on-disk location doesn't have a 1:1 mapping with the inodes in
general. So while it could be done, it will be a more complicated
operation as it requires changing a lot more code paths.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Each rgrp header is represented as a single extent on disk, so we
can calculate the position within the address space, since we are
using address spaces mapped 1:1 to the disk. This means that it
is possible to use the range based versions of filemap_fdatawrite/wait
and for invalidating the page cache.
Our eventual intent is to then be able to merge the address spaces
used for rgrps into a single address space, rather than to have
one for each glock, saving memory and reducing complexity.
Since during umount, the rgrp structures are disposed of before
the glocks, we need to store the extent information in the glock
so that is is available for a final invalidation. This patch uses
a field which is otherwise unused in rgrp glocks to do that, so
that we do not have to expand the size of a glock.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since gfs2_inplace_reserve() is always called with a valid
alloc parms structure, there is no need to test for this
within the function itself - and in any case, after we've
all ready dereferenced it anyway.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There is only one place this is used, when reading in the quota
changes at mount time. It is not really required and much
simpler to just convert the fields from the on-disk structure
as required.
There should be no functional change as a result of this patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
For historical reasons, we drop and retake the log lock in ->releasepage()
however, since there is no reason why we cannot hold the log lock over
the whole function, this allows some simplification. In particular,
pinning a buffer is only ever done under the log lock, so it is possible
here to remove the test for pinned buffers in the second loop, since it
is impossible for that to happen (it is also tested in the first loop).
As a result, two tests made later in the second loop become constants
and can also be reduced to the only possible branch. So the net result
is to remove various bits of unreachable code and make this more
readable.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
With the preceding patch, we started accepting block reservations
smaller than the ideal size, which requires a lot more parsing of the
bitmaps. To reduce the amount of bitmap searching, this patch
implements a scheme whereby each rgrp keeps track of the point
at this multi-block reservations will fail.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is just basically a resend of a patch I posted earlier.
It didn't change from its original, except in diff offsets, etc:
This patch fixes a bug in the GFS2 block allocation code. The problem
starts if a process already has a multi-block reservation, but for
some reason, another process disqualifies it from further allocations.
For example, the other process might set on the GFS2_RDF_ERROR bit.
The process holding the reservation jumps to label skip_rgrp, but
that label comes after the code that removes the reservation from the
tree. Therefore, the no longer usable reservation is not removed from
the rgrp's reservations tree; it's lost. Eventually, the lost reservation
causes the count of reserved blocks to get off, and eventually that
causes a BUG_ON(rs->rs_rbm.rgd->rd_reserved < rs->rs_free) to trigger.
This patch moves the call to after label skip_rgrp so that the
disqualified reservation is properly removed from the tree, thus keeping
the rgrp rd_reserved count sane.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Here is a second try at a patch I posted earlier, which also implements
suggestions Steve made:
Before this patch, GFS2 would keep searching through all the rgrps
until it found one that had a chunk of free blocks big enough to
satisfy the size hint, which is based on the file write size,
regardless of whether the chunk was big enough to perform the write.
However, when doing big writes there may not be a large enough
chunk of free blocks in any rgrp, due to file system fragmentation.
The largest chunk may be big enough to satisfy the write request,
but it may not meet the ideal reservation size from the "size hint".
The writes would slow to a crawl because every write would search
every rgrp, then finally give up and default to a single-block write.
In my case, performance would drop from 425MB/s to 18KB/s, or 24000
times slower.
This patch basically makes it so that if we can't find a contiguous
chunk of blocks big enough to satisfy the sizehint, we'll use the
largest chunk of blocks we found that will still contain the write.
It does so by keeping track of the largest run of blocks within the
rgrp.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GLOCK_BUG_ON() might call this function without RCU read lock. Make sure that
RCU read lock is held when using task_struct returned from pid_task().
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We need to wait for any outstanding DIO to complete in a couple
of situations. Firstly, in case we are changing out of deferred
mode (in inode_go_sync) where GLF_DIRTY will not be set. That
call could be prefixed with a test for gl_state == LM_ST_DEFERRED
but it doesn't seem worth it bearing in mind that the test for
outstanding DIO is very quick anyway, in the usual case that there
is none.
The second case is in inode_go_lock which will catch the cases
where we have a cached EX lock, but where we grant deferred locks
against it so that there is no glock state transistion. We only
need to wait if the state is not deferred, since DIO is valid
anyway in that state.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
In patch 209806aba9 we allowed
local deferred locks to be granted against a cached exclusive
lock. That opened up a corner case which this patch now
fixes.
The solution to the problem is to check whether we have cached
pages each time we do direct I/O and if so to unmap, flush
and invalidate those pages. Since the glock state machine
normally does that for us, mostly the code will be a no-op.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes a slab memory leak that sometimes can occur
for files with a very short lifespan. The problem occurs when
a dinode is deleted before it has gotten to the journal properly.
In the leak scenario, the bd object is pinned for journal
committment (queued to the metadata buffers queue: sd_log_le_buf)
but is subsequently unpinned and dequeued before it finds its way
to the ail or the revoke queue. In this rare circumstance, the bd
object needs to be freed from slab memory, or it is forgotten.
We have to be very careful how we do it, though, because
multiple processes can call gfs2_remove_from_journal. In order to
avoid double-frees, only the process that does the unpinning is
allowed to free the bd.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Function gfs2_remove_from_ail drops the reference on the bh via
brelse. This patch fixes a race condition whereby bh is deferenced
after the brelse when setting bd->bd_blkno = bh->b_blocknr;
Under certain rare circumstances, bh might be gone or reused,
and bd->bd_blkno is set to whatever that memory happens to be,
which is often 0. Later, in gfs2_trans_add_unrevoke, that bd fails
the test "bd->bd_blkno >= blkno" which causes it to never be freed.
The end result is that the bd is never freed from the bufdata cache,
which results in this error:
slab error in kmem_cache_destroy(): cache `gfs2_bufdata': Can't free all objects
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is a GFS2 version of Tejun's patch:
4f331f01b9
vfs: don't hold s_umount over close_bdev_exclusive() call
In this case its blkdev_put itself that is the issue and this
patch uses the same solution of dropping and retaking s_umount.
Reported-by: Tejun Heo <tj@kernel.org>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
In the case that atomic_open calls finish_no_open() with
the dentry that was supplied to gfs2_atomic_open() an
extra reference count is required. This patch fixes that
issue preventing a bug trap triggering at umount time.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Commit [e66cf1610: GFS2: Use lockref for glocks] replaced call:
atomic_read(&gi->gl->gl_ref) == 0
with:
__lockref_is_dead(&gl->gl_lockref)
therefore changing how gl is accessed, from gi->gl to plan gl.
However, gl can be a NULL pointer, and so gi->gl needs to be
used instead (which is guaranteed not to be NULL because fo
the while loop checking that condition).
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Pull vfs updates from Al Viro:
"All kinds of stuff this time around; some more notable parts:
- RCU'd vfsmounts handling
- new primitives for coredump handling
- files_lock is gone
- Bruce's delegations handling series
- exportfs fixes
plus misc stuff all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits)
ecryptfs: ->f_op is never NULL
locks: break delegations on any attribute modification
locks: break delegations on link
locks: break delegations on rename
locks: helper functions for delegation breaking
locks: break delegations on unlink
namei: minor vfs_unlink cleanup
locks: implement delegations
locks: introduce new FL_DELEG lock flag
vfs: take i_mutex on renamed file
vfs: rename I_MUTEX_QUOTA now that it's not used for quotas
vfs: don't use PARENT/CHILD lock classes for non-directories
vfs: pull ext4's double-i_mutex-locking into common code
exportfs: fix quadratic behavior in filehandle lookup
exportfs: better variable name
exportfs: move most of reconnect_path to helper function
exportfs: eliminate unused "noprogress" counter
exportfs: stop retrying once we race with rename/remove
exportfs: clear DISCONNECTED on all parents sooner
exportfs: more detailed comment for path_reconnect
...
some clean ups and some patches to use the new generic lru list
code. There is still plenty of scope for some further changes in
due course - faster lookups of quota structures is very much
on the todo list. Also, a start has been made towards the more tricky
issue of using the generic lru code with glocks, but that will
have to be completed in a subsequent merge window.
The other, more minor feature, is that there have been a number of
performance patches which relate to block allocation. In particular
they will improve performance when the disk is nearly full.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=qwXe
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull gfs2 updates from Steven Whitehouse:
"The main feature of interest this time is quota updates. There are
some clean ups and some patches to use the new generic lru list code.
There is still plenty of scope for some further changes in due course -
faster lookups of quota structures is very much on the todo list.
Also, a start has been made towards the more tricky issue of using the
generic lru code with glocks, but that will have to be completed in a
subsequent merge window.
The other, more minor feature, is that there have been a number of
performance patches which relate to block allocation. In particular
they will improve performance when the disk is nearly full"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Use generic list_lru for quota
GFS2: Rename quota qd_lru_lock qd_lock
GFS2: Use reflink for quota data cache
GFS2: Use lockref for glocks
GFS2: Protect quota sync generation
GFS2: Inline qd_trylock into gfs2_quota_unlock
GFS2: Make two similar quota code fragments into a function
GFS2: Remove obsolete quota tunable
GFS2: Move gfs2_icbit_munge into quota.c
GFS2: Speed up starting point selection for block allocation
GFS2: Add allocation parameters structure
GFS2: Clean up reservation removal
GFS2: fix dentry leaks
GFS2: new function gfs2_rbm_incr
GFS2: Introduce rbm field bii
GFS2: Do not reset flags on active reservations
GFS2: introduce bi_blocks for optimization
GFS2: optimize rbm_from_block wrt bi_start
GFS2: d_splice_alias() can't return error
By using the generic list_lru code, we can now separate the
per sb quota list locking from the lru locking. The lru
lock is made into the inner-most lock.
As a result of this new lock order, we may occasionally see
items on the per-sb quota list which are "dead" so that the
two places where we traverse that list are updated to take
account of that.
As a result of this patch, the gfs2 quota shrinker is now
NUMA zone aware, and we are also laying the foundations for
further improvments in due course.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Abhijith Das <adas@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
Cc: Dave Chinner <dchinner@redhat.com>
This is a straight forward rename which is in preparation for
introducing the generic list_lru infrastructure in the
following patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Abhijith Das <adas@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
This patch adds reflink support to the quota data cache. It
looks a bit strange because we still don't have a sensible
split in the lookup by id and the lru list. That is coming in
later patches though.
The intent here is just to swap the current ref count for
reflinks in all cases with as little as possible other change.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Abhijith Das <adas@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
Currently glocks have an atomic reference count and also a spinlock
which covers various internal fields, such as the state. This intent of
this patch is to replace the spinlock and the atomic reference count
with a lockref structure. This contains a spinlock which we can continue
to use as before, and a reference counter which is used in conjuction
with the spinlock to replace the previous atomic counter.
As a result of this there are some new rules for reference counting on
glocks. We need to distinguish between reference count changes under
gl_spin (which are now just increment or decrement of the new counter,
provided the count cannot hit zero) and those which are outside of
gl_spin, but which now take gl_spin internally.
The conversion is relatively straight forward. There is probably some
further clean up which can be done, but the priority at this stage is to
make the change in as simple a manner as possible.
A consequence of this change is that the reference count is being
decoupled from the lru list processing. This should allow future
adoption of the lru_list code with glocks in due course.
The reason for using the "dead" state and not just relying on 0 being
the "invalid state" is so that in due course 0 ref counts can be
allowable. The intent is to eventually be able to remove the ref count
changes which are currently hidden away in state_change().
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Now that gfs2_quota_sync can be potentially called from multiple
threads, we should protect this bit of code, and the sync generation
number in particular in order to ensure that there are no races
when syncing quotas.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
The function qd_trylock was not a trylock despite its name and
can be inlined into gfs2_quota_unlock in order to make the
code a bit clearer. There should be no functional change as a
result of this patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
There should be no functional change bar the removal of a
test of the MS_READONLY flag which would never be reachable.
This merges the common code from qd_fish and qd_trylock into
a single function and calls it from both those places.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
There is no need for a paramater which relates to the internals
of quota to be exposed to users. The only possible use would be
to turn it up so large that the memory allocation fails. So lets
remove it and set it to a sensible value which ensures that we
don't ask for multipage allocations.
Currently the size of struct gfs2_holder means that the caluclated
value is identical to the previous default value, so there should
be no functional change.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
This function is only called twice, and both callers are
quota related, so lets move this function into quota.c and
make it static.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When setting the starting point for block allocation, there were calls
to both gfs2_rbm_to_block() and gfs2_rbm_from_block() in the common case
of there being an active reservation. The gfs2_rbm_from_block() function
can be quite slow, and since the two conversions were effectively a
no-op, it makes sense to avoid them entirely in this case.
There is no functional change here, but the code should be a bit more
efficient after this patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds a structure to contain allocation parameters with
the intention of future expansion of this structure. The idea is
that we should be able to add more information about the allocation
in the future in order to allow the allocator to make a better job
of placing the requests on-disk.
There is no functional difference from applying this patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The reservation for an inode should be cleared when it is truncated so
that we can start again at a different offset for future allocations.
We could try and do better than that, by resetting the search based on
where the truncation started from, but this is only a first step.
In addition, there are three callers of gfs2_rs_delete() but only one
of those should really be testing the value of i_writecount. While
we get away with that in the other cases currently, I think it would
be better if we made that test specific to the one case which
requires it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We need to dput() the result of d_splice_alias(), unless it is passed to
finish_no_open().
Edited by Steven Whitehouse in order to make it apply to the current
GFS2 git tree, and taking account of a prerequisite patch which hasn't
been applied.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: stable@vger.kernel.org
Since the previous patch eliminated bi in favor of bii, this follow-on
patch needed to be adjusted accordingly. Here is the revised version.
This patch adds a new function, gfs2_rbm_incr, which increments
an rbm structure. This is more efficient than calling gfs2_rbm_to_block,
incrementing, then calling gfs2_rbm_from_block.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is a respin of the original patch. As Steve pointed out, the
introduction of field bii makes it easy to eliminate bi itself.
This revised patch does just that, replacing bi with bii.
This patch adds a new field to the rbm structure, called bii,
which is an index into the array of bitmaps for an rgrp.
This replaces *bi which was a pointer to the bitmap.
This is being done for further optimizations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When we used try locks for rgrps on block allocations, it was important
to clear the flags field so that we used a blocking hold on the glock.
Now that we're not doing try locks, clearing flags is unnecessary, and
a waste of time. In fact, it's probably doing the wrong thing because
it clears the GL_SKIP bit that was set for the lvb tracking purposes.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch introduces a new field in the bitmap structure called
bi_blocks. Its purpose is to save us from constantly multiplying
bi_len by the constant GFS2_NBBY. It also paves the way for more
optimization in a future patch.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
In function gfs2_rbm_from_block, it starts by checking if the block
falls within the first bitmap. It does so by checking if the rbm's
offset is less than (rbm->bi->bi_start + rbm->bi->bi_len) * GFS2_NBBY.
However, the first bitmap will always have bi_start==0. Therefore
this is an unnecessary calculation in a function that gets called
billions of times. This patch removes the reference to bi_start.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
unless it was given an IS_ERR(inode), which isn't the case here. So clean
up the unnecessary error handling in gfs2_create_inode().
This paves the way for real fixes (hence the stable Cc).
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: stable@vger.kernel.org
In gfs2_create_inode() set FILE_CREATED in *opened.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge more patches from Andrew Morton:
"The rest of MM. Plus one misc cleanup"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
mm/Kconfig: add MMU dependency for MIGRATION.
kernel: replace strict_strto*() with kstrto*()
mm, thp: count thp_fault_fallback anytime thp fault fails
thp: consolidate code between handle_mm_fault() and do_huge_pmd_anonymous_page()
thp: do_huge_pmd_anonymous_page() cleanup
thp: move maybe_pmd_mkwrite() out of mk_huge_pmd()
mm: cleanup add_to_page_cache_locked()
thp: account anon transparent huge pages into NR_ANON_PAGES
truncate: drop 'oldsize' truncate_pagecache() parameter
mm: make lru_add_drain_all() selective
memcg: document cgroup dirty/writeback memory statistics
memcg: add per cgroup writeback pages accounting
memcg: check for proper lock held in mem_cgroup_update_page_stat
memcg: remove MEMCG_NR_FILE_MAPPED
memcg: reduce function dereference
memcg: avoid overflow caused by PAGE_ALIGN
memcg: rename RESOURCE_MAX to RES_COUNTER_MAX
memcg: correct RESOURCE_MAX to ULLONG_MAX
mm: memcg: do not trap chargers with full callstack on OOM
mm: memcg: rework and document OOM waiting and wakeup
...
truncate_pagecache() doesn't care about old size since commit
cedabed49b ("vfs: Fix vmtruncate() regression"). Let's drop it.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert the filesystem shrinkers to use the new API, and standardise some
of the behaviours of the shrinkers at the same time. For example,
nr_to_scan means the number of objects to scan, not the number of objects
to free.
I refactored the CIFS idmap shrinker a little - it really needs to be
broken up into a shrinker per tree and keep an item count with the tree
root so that we don't need to walk the tree every time the shrinker needs
to count the number of objects in the tree (i.e. all the time under
memory pressure).
[glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree]
[assorted fixes folded in]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The sysctl knob sysctl_vfs_cache_pressure is used to determine which
percentage of the shrinkable objects in our cache we should actively try
to shrink.
It works great in situations in which we have many objects (at least more
than 100), because the aproximation errors will be negligible. But if
this is not the case, specially when total_objects < 100, we may end up
concluding that we have no objects at all (total / 100 = 0, if total <
100).
This is certainly not the biggest killer in the world, but may matter in
very low kernel memory situations.
Signed-off-by: Glauber Costa <glommer@openvz.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
window. Also, most of them are bug fixes this time. Two of my
three patches (moving gfs2_sync_meta and merging the two writepage
implementations) are clean ups with the third (taking the glock ref
in examine_bucket) being a fix for a difficult to hit race condition.
The removal of an unused memory barrier is a clean up from Bob Peterson,
and the "spectator" relates to a rarely used mount option. Ben
Marzinski's patch fixes a corner case where the incorrect inode
flags were being set, resulting in incorrect behaviour on fsync.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=rsQv
-----END PGP SIGNATURE-----
Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull GFS2 updates from Steven Whitehouse:
"This is possibly the smallest ever set of GFS2 patches for a merge
window. Also, most of them are bug fixes this time.
Two of my three patches (moving gfs2_sync_meta and merging the two
writepage implementations) are clean ups with the third (taking the
glock ref in examine_bucket) being a fix for a difficult to hit race
condition.
The removal of an unused memory barrier is a clean up from Bob
Peterson, and the "spectator" relates to a rarely used mount option.
Ben Marzinski's patch fixes a corner case where the incorrect inode
flags were being set, resulting in incorrect behaviour on fsync"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: dirty inode correctly in gfs2_write_end
GFS2: Don't flag consistency error if first mounter is a spectator
GFS2: Remove unnecessary memory barrier
GFS2: Merge ordered and writeback writepage
GFS2: Take glock reference in examine_bucket()
GFS2: Move gfs2_sync_meta to lops.c
Pull vfs pile 2 (of many) from Al Viro:
"Mostly Miklos' series this time"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
constify dcache.c inlined helpers where possible
fuse: drop dentry on failed revalidate
fuse: clean up return in fuse_dentry_revalidate()
fuse: use d_materialise_unique()
sysfs: use check_submounts_and_drop()
nfs: use check_submounts_and_drop()
gfs2: use check_submounts_and_drop()
afs: use check_submounts_and_drop()
vfs: check unlinked ancestors before mount
vfs: check submounts and drop atomically
vfs: add d_walk()
vfs: restructure d_genocide()
Pull trivial tree from Jiri Kosina:
"The usual trivial updates all over the tree -- mostly typo fixes and
documentation updates"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits)
doc: Documentation/cputopology.txt fix typo
treewide: Convert retrun typos to return
Fix comment typo for init_cma_reserved_pageblock
Documentation/trace: Correcting and extending tracepoint documentation
mm/hotplug: fix a typo in Documentation/memory-hotplug.txt
power: Documentation: Update s2ram link
doc: fix a typo in Documentation/00-INDEX
Documentation/printk-formats.txt: No casts needed for u64/s64
doc: Fix typo "is is" in Documentations
treewide: Fix printks with 0x%#
zram: doc fixes
Documentation/kmemcheck: update kmemcheck documentation
doc: documentation/hwspinlock.txt fix typo
PM / Hibernate: add section for resume options
doc: filesystems : Fix typo in Documentations/filesystems
scsi/megaraid fixed several typos in comments
ppc: init_32: Fix error typo "CONFIG_START_KERNEL"
treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks
page_isolation: Fix a comment typo in test_pages_isolated()
doc: fix a typo about irq affinity
...
Do have_submounts(), shrink_dcache_parent() and d_drop() atomically.
check_submounts_and_drop() can deal with negative dentries and
non-directories as well.
Non-directories can also be mounted on. And just like directories we don't
want these to disappear with invalidation.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
GFS2 was only setting I_DIRTY_DATASYNC on files that it wrote to, when
it actually increased the file size. If gfs2_fsync was called without
I_DIRTY_DATASYNC set, it didn't flush the incore data to the log before
returning, so any metadata or journaled data changes were not getting
fsynced. This meant that writes to the middle of files were not always
getting fsynced properly.
This patch makes gfs2 set I_DIRTY_DATASYNC whenever metadata has been
updated during a write. It also make gfs2_sync flush the incore log
if I_DIRTY_PAGES is set, and the file is using data journalling. This
will make sure that all incore logged data gets written to disk before
returning from a fsync.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch checks for the first mounter being a specator. If so, it
makes sure all the journals are clean. If there's a dirty journal,
the mount fails.
Testing results:
# insmod gfs2.ko
# mount -tgfs2 -o spectator /dev/sasdrives/scratch /mnt/gfs2
mount: permission denied
# dmesg | tail -2
[ 3390.655996] GFS2: fsid=MUSKETEER:home: Now mounting FS...
[ 3390.841336] GFS2: fsid=MUSKETEER:home.s: jid=0: Journal is dirty, so the first mounter must not be a spectator.
# mount -tgfs2 /dev/sasdrives/scratch /mnt/gfs2
# umount /mnt/gfs2
# mount -tgfs2 -o spectator /dev/sasdrives/scratch /mnt/gfs2
# ls /mnt/gfs2|wc -l
352
# umount /mnt/gfs2
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Function test_and_clear_bit implies a memory barrier, so subsequent
memory barriers are unnecessary.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The writepages function was recently merged between writeback
and ordered mode. This completes the change by doing the same
with writepage. The remaining differences in writepage were
left over from some earlier time and not actually doing anything
useful.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Don't emit OOM warnings when k.alloc calls fail when
there there is a v.alloc immediately afterwards.
Converted a kmalloc/vmalloc with memset to kzalloc/vzalloc.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We need to check the glock ref counter in a race free way
in order to ensure that the gfs2_glock_hold() call will
succeed. The easiest way to do that is to simply take the
reference count early in the common code of examine_bucket,
skipping any glocks with zero ref count.
That means that the examiner functions all need to put their
reference on the glock once they've performed their function.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: David Teigland <teigland@redhat.com>
Tested-by: David Teigland <teigland@redhat.com>
Since gfs2_sync_meta() is only called from a single file, lets move
it to lops.c where it is used, and mark it static. At the same
time, we can clean up the meta_io.h header too.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since the introduction of atomic_open, gfs2_getxattr can be
called with the glock already held, so we need to allow for
this.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: David Teigland <teigland@redhat.com>
Tested-by: David Teigland <teigland@redhat.com>
alloc_workqueue() returns a NULL on error, it doesn't return an ERR_PTR.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When run during fsync, a gfs2_log_flush could happen between the
time when gfs2_ail_flush checked the number of blocks to revoke,
and when it actually started the transaction to do those revokes.
This occassionally caused it to need more revokes than it reserved,
causing gfs2 to crash.
Instead of just reserving enough revokes to handle the blocks that
currently need them, this patch makes gfs2_ail_flush reserve the
maximum number of revokes it can, without increasing the total number
of reserved log blocks. This patch also passes the number of reserved
revokes to __gfs2_ail_flush() so that it doesn't go over its limit
and cause a crash like we're seeing. Non-fsync calls to __gfs2_ail_flush
will still cause a BUG() necessary revokes are skipped.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
dbf2576e37 ("workqueue: make all workqueues non-reentrant") made
WQ_NON_REENTRANT no-op and the flag is going away. Remove its usages.
This patch doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: cluster-devel@redhat.com
PTR_RET should be PTR_ERR
Reported-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Pull second set of VFS changes from Al Viro:
"Assorted f_pos race fixes, making do_splice_direct() safe to call with
i_mutex on parent, O_TMPFILE support, Jeff's locks.c series,
->d_hash/->d_compare calling conventions changes from Linus, misc
stuff all over the place."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
Document ->tmpfile()
ext4: ->tmpfile() support
vfs: export lseek_execute() to modules
lseek_execute() doesn't need an inode passed to it
block_dev: switch to fixed_size_llseek()
cpqphp_sysfs: switch to fixed_size_llseek()
tile-srom: switch to fixed_size_llseek()
proc_powerpc: switch to fixed_size_llseek()
ubi/cdev: switch to fixed_size_llseek()
pci/proc: switch to fixed_size_llseek()
isapnp: switch to fixed_size_llseek()
lpfc: switch to fixed_size_llseek()
locks: give the blocked_hash its own spinlock
locks: add a new "lm_owner_key" lock operation
locks: turn the blocked_list into a hashtable
locks: convert fl_link to a hlist_node
locks: avoid taking global lock if possible when waking up blocked waiters
locks: protect most of the file_lock handling with i_lock
locks: encapsulate the fl_link list handling
locks: make "added" in __posix_lock_file a bool
...
Here's the big driver core merge for 3.11-rc1
Lots of little things, and larger firmware subsystem updates, all
described in the shortlog. Nice thing here is that we finally get rid
of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
been always on for a number of kernel releases, now it's just removed.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlHRsGMACgkQMUfUDdst+ylIIACfW8lLxOPVK+iYG699TWEBAkp0
LFEAnjlpAMJ1JnoZCuWDZObNCev93zGB
=020+
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the big driver core merge for 3.11-rc1
Lots of little things, and larger firmware subsystem updates, all
described in the shortlog. Nice thing here is that we finally get rid
of CONFIG_HOTPLUG, after 10+ years, thanks to Stephen Rohtwell (it had
been always on for a number of kernel releases, now it's just
removed)"
* tag 'driver-core-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
driver core: device.h: fix doc compilation warnings
firmware loader: fix another compile warning with PM_SLEEP unset
build some drivers only when compile-testing
firmware loader: fix compile warning with PM_SLEEP set
kobject: sanitize argument for format string
sysfs_notify is only possible on file attributes
firmware loader: simplify holding module for request_firmware
firmware loader: don't export cache_firmware and uncache_firmware
drivers/base: Use attribute groups to create sysfs memory files
firmware loader: fix compile warning
firmware loader: fix build failure with !CONFIG_FW_LOADER_USER_HELPER
Documentation: Updated broken link in HOWTO
Finally eradicate CONFIG_HOTPLUG
driver core: firmware loader: kill FW_ACTION_NOHOTPLUG requests before suspend
driver core: firmware loader: don't cache FW_ACTION_NOHOTPLUG firmware
Documentation: Tidy up some drivers/base/core.c kerneldoc content.
platform_device: use a macro instead of platform_driver_register
firmware: move EXPORT_SYMBOL annotations
firmware: Avoid deadlock of usermodehelper lock at shutdown
dell_rbu: Select CONFIG_FW_LOADER_USER_HELPER explicitly
...
Pull GFS2 updates from Steven Whitehouse:
"There are a few bug fixes for various, mostly very minor corner cases,
plus some interesting new features.
The new features include atomic_open whose main benefit will be the
reduction in locking overhead in case of combined lookup/create and
open operations, sorting the log buffer lists by block number to
improve the efficiency of AIL writeback, and aggressively issuing
revokes in gfs2_log_flush to reduce overhead when dropping glocks."
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Reserve journal space for quota change in do_grow
GFS2: Fix fstrim boundary conditions
GFS2: fix warning message
GFS2: aggressively issue revokes in gfs2_log_flush
GFS2: fix regression in dir_double_exhash
GFS2: Add atomic_open support
GFS2: Only do one directory search on create
GFS2: fix error propagation in init_threads()
GFS2: Remove no-op wrapper function
GFS2: Cocci spatch "ptr_ret.spatch"
GFS2: Eliminate gfs2_rg_lops
GFS2: Sort buffer lists by inplace block number
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=SwaI
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Lots of bug fixes, cleanups and optimizations. In the bug fixes
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
ext4: optimize starting extent in ext4_ext_rm_leaf()
jbd2: invalidate handle if jbd2_journal_restart() fails
ext4: translate flag bits to strings in tracepoints
ext4: fix up error handling for mpage_map_and_submit_extent()
jbd2: fix theoretical race in jbd2__journal_restart
ext4: only zero partial blocks in ext4_zero_partial_blocks()
ext4: check error return from ext4_write_inline_data_end()
ext4: delete unnecessary C statements
ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()
jbd2: move superblock checksum calculation to jbd2_write_superblock()
ext4: pass inode pointer instead of file pointer to punch hole
ext4: improve free space calculation for inline_data
ext4: reduce object size when !CONFIG_PRINTK
ext4: improve extent cache shrink mechanism to avoid to burn CPU time
ext4: implement error handling of ext4_mb_new_preallocation()
ext4: fix corruption when online resizing a fs with 1K block size
ext4: delete unused variables
ext4: return FIEMAP_EXTENT_UNKNOWN for delalloc extents
jbd2: remove debug dependency on debug_fs and update Kconfig help text
jbd2: use a single printk for jbd_debug()
...
Having a global lock that protects all of this code is a clear
scalability problem. Instead of doing that, move most of the code to be
protected by the i_lock instead. The exceptions are the global lists
that the ->fl_link sits on, and the ->fl_block list.
->fl_link is what connects these structures to the
global lists, so we must ensure that we hold those locks when iterating
over or updating these lists.
Furthermore, sound deadlock detection requires that we hold the
blocked_list state steady while checking for loops. We also must ensure
that the search and update to the list are atomic.
For the checking and insertion side of the blocked_list, push the
acquisition of the global lock into __posix_lock_file and ensure that
checking and update of the blocked_list is done without dropping the
lock in between.
On the removal side, when waking up blocked lock waiters, take the
global lock before walking the blocked list and dequeue the waiters from
the global list prior to removal from the fl_block list.
With this, deadlock detection should be race free while we minimize
excessive file_lock_lock thrashing.
Finally, in order to avoid a lock inversion problem when handling
/proc/locks output we must ensure that manipulations of the fl_block
list are also protected by the file_lock_lock.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instances either don't look at it at all (the majority of cases) or
only want it to find the superblock (which can be had as dentry->d_sb).
A few cases that want more are actually safe with dentry->d_inode -
the only precaution needed is the check that it hadn't been replaced with
NULL by rmdir() or by overwriting rename(), which case should be simply
treated as cache miss.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If a GFS2 file system is mounted with quotas and a file is grown
in such a way that its free blocks for the allocation are represented
in a secondary bitmap, GFS2 ran out of blocks in the transaction.
That resulted in "fatal: assertion "tr->tr_num_buf <= tr->tr_blocks".
This patch reserves extra blocks for the quota change so the
transaction has enough space.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch correctly distinguishes two boundary conditions:
1. When the given range is entire within the unaccounted space between
two rgrps, and
2. The range begins beyond the end of the filesystem
Also fix the unit of the returned value r.len (total trimming) to be in bytes
instead of the (incorrect) 512 byte blocks
With this patch, GFS2 passes multiple iterations of all the relevant xfstests
(251, 260, 288) with different fs block sizes.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes a warning message introduced in the recent
"GFS2: aggressively issue revokes in gfs2_log_flush" patch.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch looks at all the outstanding blocks in all the transactions
on the log, and moves the completed ones to the ail2 list. Then it
issues revokes for these blocks. This will hopefully speed things up
in situations where there is a lot of contention for glocks, especially
if they are acquired serially.
revoke_lo_before_commit will issue at most one log block's full of these
preemptive revokes. The amount of reserved log space that
gfs2_log_reserve() ignores has been incremented to allow for this extra
block.
This patch also consolidates the common revoke instructions into one
function, gfs2_add_revoke().
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Recent commit e8830d8 introduced a bug in function dir_double_exhash;
it was failing to set h in the fall-back case. This patch corrects it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
I've restricted atomic_open to only operate on regular files, although
I still don't understand why atomic_open should not be possible also for
directories on GFS2. That can always be added in later though, if it
makes sense.
The ->atomic_open function can be passed negative dentries, which
in most cases means either ENOENT (->lookup) or a call to d_instantiate
(->create). In the GFS2 case though, we need to actually perform the
look up, since we do not know whether there has been a new inode created
on another node. The look up calls d_splice_alias which then tries to
rehash the dentry - so the solution here is to simply check for that
in d_splice_alias. The same issue is likely to affect any other cluster
filesystem implementing ->atomic_open
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields fieldses org>
Cc: Jeff Layton <jlayton@redhat.com>
Creation of a new inode requires a directory search in order to ensure
that we are not trying to create an inode with the same name as an
existing one. This was hidden away inside the create_ok() function.
In the case that there was an existing inode, and a lookup can be
substituted for a create (which is the case with regular files
when the O_EXCL flag is not in use) then we were doing a second
lookup in order to return the inode.
This patch merges these two lookups into one. This can be done by
passing a flag to gfs2_dir_search() to tell it to just return -EEXIST
in the cases where we don't actually want to look up the inode.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
If kthread_run() fails, init_threads() returns
IS_ERR(p) instead of PTR_ERR(p).
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Use PTR_RET in place of open coding this function.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
With recent changes to the transactions, it appears that we
are no longer using the "log ops" for resource groups. Since the
log commit code processes the array of log ops, eliminating this
should be marginally better for performance. Therefore this patch
eliminates it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch simply sort the data and metadata buffer lists by their
inplace block number. This makes gfs2_log_flush issue the inplace IO
in sequential order, which will hopefully speed up writing the IO
out to disk.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Ever since commit 45f035ab9b ("CONFIG_HOTPLUG should be always on"),
it has been basically impossible to build a kernel with CONFIG_HOTPLUG
turned off. Remove all the remaining references to it.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch makes GFS2 immediately reclaim/delete all iopen glocks
as soon as they're dequeued. This allows deleters to get an
EXclusive lock on iopen so files are deleted properly instead of
being set as unlinked.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This version has one more correction: the vmalloc calls are replaced
by __vmalloc calls to preserve the GFP_NOFS flag.
When GFS2's directory management code allocates buffers for a
directory hash table, if it can't get the memory it needs, it
currently gives a bad return code. Rather than giving an error,
this patch allows it to use virtual memory rather than kernel
memory for the hash table. This should make it possible for
directories to function properly, even when kernel memory becomes
very fragmented.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch calls get_write_access in a few functions. This
merely increases inode->i_writecount for the duration of the function.
That will ensure that any file closes won't delete the inode's
multi-block reservation while the function is running.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch sets the log descriptor type according to whether the
journal commit is for (journaled) data or metadata. This was
recently broken when the functions to process data and metadata
log ops were combined.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix build errors by correcting DLM dependencies in GFS2.
Build errors happen when CONFIG_GFS2_FS_LOCKING_DLM=y and CONFIG_DLM=m:
fs/built-in.o: In function `gfs2_lock':
file.c:(.text+0xc7abd): undefined reference to `dlm_posix_get'
file.c:(.text+0xc7ad0): undefined reference to `dlm_posix_unlock'
file.c:(.text+0xc7ad9): undefined reference to `dlm_posix_lock'
fs/built-in.o: In function `gdlm_unmount':
lock_dlm.c:(.text+0xd6e5b): undefined reference to `dlm_release_lockspace'
fs/built-in.o: In function `sync_unlock':
lock_dlm.c:(.text+0xd6e9e): undefined reference to `dlm_unlock'
fs/built-in.o: In function `sync_lock':
lock_dlm.c:(.text+0xd6fb6): undefined reference to `dlm_lock'
fs/built-in.o: In function `gdlm_put_lock':
lock_dlm.c:(.text+0xd7238): undefined reference to `dlm_unlock'
fs/built-in.o: In function `gdlm_mount':
lock_dlm.c:(.text+0xd753e): undefined reference to `dlm_new_lockspace'
lock_dlm.c:(.text+0xd79d3): undefined reference to `dlm_release_lockspace'
fs/built-in.o: In function `gdlm_lock':
lock_dlm.c:(.text+0xd8179): undefined reference to `dlm_lock'
fs/built-in.o: In function `gdlm_cancel':
lock_dlm.c:(.text+0xd6b22): undefined reference to `dlm_unlock'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch changes the multi-block allocation code, such that
directory inodes only get a single block reserved in the bitmap.
That way, the bitmaps are more tightly packed together, and there
are fewer spans of free blocks for in-use block reservations.
This means it takes less time to find a free span of blocks in the
bitmap, which speeds things up. This increases the performance of
some workloads by almost 2X. In Nate's mockup.py script (which does
(1) create dir, (2) create dir in dir, (3) create file in that dir)
the test executes in 23 steps rather than 43 steps, a 47%
performance improvement.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes two regression problems that Abhi found in the
GFS2 quota code.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
->invalidatepage() aop now accepts range to invalidate so we can make
use of it in gfs2_invalidatepage().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: cluster-devel@redhat.com
Currently there is no way to truncate partial page where the end
truncate point is not at the end of the page. This is because it was not
needed and the functionality was enough for file system truncate
operation to work properly. However more file systems now support punch
hole feature and it can benefit from mm supporting truncating page just
up to the certain point.
Specifically, with this functionality truncate_inode_pages_range() can
be changed so it supports truncating partial page at the end of the
range (currently it will BUG_ON() if 'end' is not at the end of the
page).
This commit changes the invalidatepage() address space operation
prototype to accept range to be invalidated and update all the instances
for it.
We also change the block_invalidatepage() in the same way and actually
make a use of the new length argument implementing range invalidation.
Actual file system implementations will follow except the file systems
where the changes are really simple and should not change the behaviour
in any way .Implementation for truncate_page_range() which will be able
to accept page unaligned ranges will follow as well.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Pull block core updates from Jens Axboe:
- Major bit is Kents prep work for immutable bio vecs.
- Stable candidate fix for a scheduling-while-atomic in the queue
bypass operation.
- Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging
discard bios.
- Tejuns changes to convert the writeback thread pool to the generic
workqueue mechanism.
- Runtime PM framework, SCSI patches exists on top of these in James'
tree.
- A few random fixes.
* 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits)
relay: move remove_buf_file inside relay_close_buf
partitions/efi.c: replace useless kzalloc's by kmalloc's
fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read()
block: fix max discard sectors limit
blkcg: fix "scheduling while atomic" in blk_queue_bypass_start
Documentation: cfq-iosched: update documentation help for cfq tunables
writeback: expose the bdi_wq workqueue
writeback: replace custom worker pool implementation with unbound workqueue
writeback: remove unused bdi_pending_list
aoe: Fix unitialized var usage
bio-integrity: Add explicit field for owner of bip_buf
block: Add an explicit bio flag for bios that own their bvec
block: Add bio_alloc_pages()
block: Convert some code to bio_for_each_segment_all()
block: Add bio_for_each_segment_all()
bounce: Refactor __blk_queue_bounce to not use bi_io_vec
raid1: use bio_copy_data()
pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage
pktcdvd: use bio_copy_data()
block: Add bio_copy_data()
...
Pull GFS2 updates from Steven Whitehouse:
"There is not a whole lot of change this time - there are some further
changes which are in the works, but those will be held over until next
time.
Here there are some clean ups to inode creation, the addition of an
origin (local or remote) indicator to glock demote requests, removal
of one of the remaining GFP_NOFAIL allocations during log flushes, one
minor clean up, and a one liner bug fix."
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Flush work queue before clearing glock hash tables
GFS2: Add origin indicator to glock demote tracing
GFS2: Add origin indicator to glock callbacks
GFS2: replace gfs2_ail structure with gfs2_trans
GFS2: Remove vestigial parameter ip from function rs_deltree
GFS2: Use gfs2_dinode_out() in the inode create path
GFS2: Remove gfs2_refresh_inode from inode creation path
GFS2: Clean up inode creation path
Use the new vsprintf extension to avoid any possible
message interleaving.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There was a timing window when a GFS2 file system was unmounted
that caused GFS2 to call BUG() and panic the kernel. The call
to BUG() is meant to ensure that the glock reference count,
gl_ref, never gets down to zero and bounce back up again. What was
happening during umount is that function gfs2_put_super was dequeing
its glocks for well-known files. In particular, we saw it on the
journal glock, sd_jinode_gh. The dequeue caused delayed work to be
queued for the glock state machine, to transition the lock to an
"unlocked" state. While the work was still queued, gfs2_put_super
called gfs2_gl_hash_clear to clear out the glock hash tables.
If the timing was just so, the glock work function would drop the
reference count at the time when it was being checked for zero,
and that caused BUG() to be called. This patch calls
flush_workqueue before clearing the glock hash tables, thereby
ensuring that the delayed work is executed before the hash tables
are cleared, and therefore the reference count never goes to zero
until the glock is cleared.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds the origin indicator to the trace point for glock
demotion, so that it is possible to see where demote requests
have come from.
Note that requests generated from the demote_rq sysfs interface
will show as remote, since they are intended to replicate
exactly the effect of a demote reuqest from a remote node. It
is still possible to tell these apart by looking at the process
which initiated the demote request.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds a bool indicating whether the demote
request was originated locally or remotely. This is then
used by the iopen ->go_callback() to make 100% sure that
it will only respond to remote callbacks.
Since ->evict_inode() uses GL_NOCACHE when it attempts to
get an exclusive lock on the iopen lock, this may result
in extra scheduling of the workqueue in case that the
exclusive promotion request failed. This patch prevents
that from happening.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
In order to allow transactions and log flushes to happen at the same
time, gfs2 needs to move the transaction accounting and active items
list code into the gfs2_trans structure. As a first step toward this,
this patch removes the gfs2_ail structure, and handles the active items
list in the gfs_trans structure. This keeps gfs2 from allocating an ail
structure on log flushes, and gives us a struture that can later be used
to store the transaction accounting outside of the gfs2 superblock
structure.
With this patch, at the end of a transaction, gfs2 will add the
gfs2_trans structure to the superblock if there is not one already.
This structure now has the active items fields that were previously in
gfs2_ail. This is not necessary in the case where the transaction was
simply used to add revokes, since these are never written outside of the
journal, and thus, don't need an active items list.
Also, in order to make sure that the transaction structure is not
removed while it's still in use by gfs2_trans_end, unlocking the
sd_log_flush_lock has to happen slightly later in ending the
transaction.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The functions that delete block reservations from the rgrp block
reservations rbtree no longer use the ip parameter. This patch
eliminates the parameter.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Over the previous two patches relating to inode creation, the
content of init_dinode() has been looking more and more like
gfs2_dinode_out(). This is not an accident! This patch replaces
the parts of init_dinode() which are duplicated in gfs2_dinode_out()
with a call to that function.
Mostly that is straightforward, but there is one issue which needed
to be resolved relating to the link count. The link count has to be
set to zero in a certain error handling code path, which lands up
calling iput(). This is now done specifically in that code path
allowing the link count to be set earlier and written into the
on disk inode by gfs2_dinode_put() in the normal way.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The original method for creating inodes used in GFS2 was to fill
out a buffer, with all the information, and then to read that
buffer into the in-core inode, using gfs2_refresh_inode()
The problem with this approach is that all the inode's fields
need to be calculated ahead of time, and were stored in various
variables making the code rather complicated.
The new approach is simply to allocate the in-core inode earlier
and fill in as many fields as possible ahead of time. These can
then be used to initilise the on disk representation. The
code has been working towards the point where it is possible
to remove gfs2_refresh_inode() because all the fields are
correctly initialised ahead of time. We've now reached that
milestone, and have reversed the order of setting up the in
core and on disk inodes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch cleans up the inode creation code path in GFS2. After the
Orlov allocator was merged, a number of potential improvements are
now possible, and this is a first set of these.
The quota handling is now updated so that it matches the point in
the code where the allocation takes place. This means that the one
exception in gfs2_alloc_blocks relating to quota is now no longer
required, and we can use the generic code everywhere.
In addition the call to figure out whether we need to allocate any
extra blocks in order to add a directory entry is moved higher up
gfs2_create_inode. This means that if it returns an error, we
can deal with that at a stage where it is easier to handle that case.
The returned status cannot change during the function since we hold
an exclusive lock on the directory.
Two calls to gfs2_rindex_update have been changed to one, again at
the top of gfs2_create_inode to simplify error handling.
The time stamps are also now initialised earlier in the creation
process, this is gradually moving towards being able to remove the
call to gfs2_refresh_inode in gfs2_inode_create once we have all the
fields covered.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch changes GFS2's discard issuing code so that it calls
function sb_issue_discard rather than blkdev_issue_discard. The
code was calling blkdev_issue_discard and specifying the correct
sector offset and sector size, but blkdev_issue_discard expects
these values to be in terms of 512 byte sectors, even if the native
sector size for the device is different. Calling sb_issue_discard
with the BLOCK size instead ensures the correct block-to-512b-sector
translation. I verified that "minlen" is specified in blocks, so
comparing it to a number of blocks is correct.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When withdraw occurs, we need to continue to allow unlocks of fcntl
locks to occur, however these will only be local, since the node has
withdrawn from the cluster. This prevents triggering a VFS level
bug trap due to locks remaining when a file is closed.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The error code in gfs2_rs_alloc() is set to ENOMEM when error
but never be used, instead, gfs2_rs_alloc() always return 0.
Fix to return 'error'.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Use memchr_inv to verify that the specified memory range is cleared.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: cluster-devel@redhat.com
Cc: Christine Caulfield <ccaulfie@redhat.com>
Cc: David Teigland <teigland@redhat.com>
The temp lvb bitmap was on the stack, which could
be an alignment problem for __set_bit_le. Use
kmalloc for it instead.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Just a little convenience macro - main reason to add it now is preparing
for immutable bio vecs, it'll reduce the size of the patch that puts
bi_sector/bi_size/bi_idx into a struct bvec_iter.
Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Lars Ellenberg <drbd-dev@lists.linbit.com>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Alasdair Kergon <agk@redhat.com>
CC: dm-devel@redhat.com
CC: Neil Brown <neilb@suse.de>
CC: Martin Schwidefsky <schwidefsky@de.ibm.com>
CC: Heiko Carstens <heiko.carstens@de.ibm.com>
CC: linux-s390@vger.kernel.org
CC: Chris Mason <chris.mason@fusionio.com>
CC: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.
A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.
Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.
Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives. Allowing simple, safe,
well understood work-arounds to known problematic software.
This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work. While writing this patch I saw a handful of such
cases. The most significant being autofs that lives in the module
autofs4.
This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.
After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module. The common pattern in the kernel is to call request_module()
without regards to the users permissions. In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted. In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
According to SUSv3:
[EACCES] Permission denied. An attempt was made to access a file in a way
forbidden by its file access permissions.
[EPERM] Operation not permitted. An attempt was made to perform an operation
limited to processes with appropriate privileges or to the owner of a file
or other resource.
So -EPERM should be returned if capability checks fails.
Strictly speaking this is an API change since the error code user sees is
altered.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch is a follow up on below patch:
[PATCH] exportfs: add FILEID_INVALID to indicate invalid fid_type
commit: 216b6cbdcb
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Vivek Trivedi <t.vivek@samsung.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Sage Weil <sage@inktank.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull user namespace and namespace infrastructure changes from Eric W Biederman:
"This set of changes starts with a few small enhnacements to the user
namespace. reboot support, allowing more arbitrary mappings, and
support for mounting devpts, ramfs, tmpfs, and mqueuefs as just the
user namespace root.
I do my best to document that if you care about limiting your
unprivileged users that when you have the user namespace support
enabled you will need to enable memory control groups.
There is a minor bug fix to prevent overflowing the stack if someone
creates way too many user namespaces.
The bulk of the changes are a continuation of the kuid/kgid push down
work through the filesystems. These changes make using uids and gids
typesafe which ensures that these filesystems are safe to use when
multiple user namespaces are in use. The filesystems converted for
3.9 are ceph, 9p, afs, ocfs2, gfs2, ncpfs, nfs, nfsd, and cifs. The
changes for these filesystems were a little more involved so I split
the changes into smaller hopefully obviously correct changes.
XFS is the only filesystem that remains. I was hoping I could get
that in this release so that user namespace support would be enabled
with an allyesconfig or an allmodconfig but it looks like the xfs
changes need another couple of days before it they are ready."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (93 commits)
cifs: Enable building with user namespaces enabled.
cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t
cifs: Convert struct cifs_sb_info to use kuids and kgids
cifs: Modify struct smb_vol to use kuids and kgids
cifs: Convert struct cifsFileInfo to use a kuid
cifs: Convert struct cifs_fattr to use kuid and kgids
cifs: Convert struct tcon_link to use a kuid.
cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t
cifs: Convert from a kuid before printing current_fsuid
cifs: Use kuids and kgids SID to uid/gid mapping
cifs: Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID to keyring_alloc
cifs: Use BUILD_BUG_ON to validate uids and gids are the same size
cifs: Override unmappable incoming uids and gids
nfsd: Enable building with user namespaces enabled.
nfsd: Properly compare and initialize kuids and kgids
nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids
nfsd: Modify nfsd4_cb_sec to use kuids and kgids
nfsd: Handle kuids and kgids in the nfs4acl to posix_acl conversion
nfsd: Convert nfsxdr to use kuids and kgids
nfsd: Convert nfs3xdr to use kuids and kgids
...
Create a helper function to check if a backing device requires stable
page writes and, if so, performs the necessary wait. Then, make it so
that all points in the memory manager that handle making pages writable
use the helper function. This should provide stable page write support
to most filesystems, while eliminating unnecessary waiting for devices
that don't require the feature.
Before this patchset, all filesystems would block, regardless of whether
or not it was necessary. ext3 would wait, but still generate occasional
checksum errors. The network filesystems were left to do their own
thing, so they'd wait too.
After this patchset, all the disk filesystems except ext3 and btrfs will
wait only if the hardware requires it. ext3 (if necessary) snapshots
pages instead of blocking, and btrfs provides its own bdi so the mm will
never wait. Network filesystems haven't been touched, so either they
provide their own stable page guarantees or they don't block at all.
The blocking behavior is back to what it was before 3.0 if you don't
have a disk requiring stable page writes.
Here's the result of using dbench to test latency on ext2:
3.8.0-rc3:
Operation Count AvgLat MaxLat
----------------------------------------
WriteX 109347 0.028 59.817
ReadX 347180 0.004 3.391
Flush 15514 29.828 287.283
Throughput 57.429 MB/sec 4 clients 4 procs max_latency=287.290 ms
3.8.0-rc3 + patches:
WriteX 105556 0.029 4.273
ReadX 335004 0.005 4.112
Flush 14982 30.540 298.634
Throughput 55.4496 MB/sec 4 clients 4 procs max_latency=298.650 ms
As you can see, the maximum write latency drops considerably with this
patch enabled. The other filesystems (ext3/ext4/xfs/btrfs) behave
similarly, but see the cover letter for those results.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When reading dinodes from the disk convert uids and gids
into kuids and kgids to store in vfs data structures.
When writing to dinodes to the disk convert kuids and kgids
in the in memory structures into plain uids and gids.
For now all on disk data structures are assumed to be
stored in the initial user namespace.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Where kuid_t values are compared use uid_eq and where kgid_t values
are compared use gid_eq. This is unfortunately necessary because
of the type safety that keeps someone from accidentally mixing
kuids and kgids with other types.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Remove the QUOTA_USER and QUOTA_GRUP defines. Remove
the last vestigal users of QUOTA_USER and QUOTA_GROUP.
Now that struct kqid is used throughout the gfs2 quota
code the need there is to use QUOTA_USER and QUOTA_GROUP
and the defines are just extraneous and confusing.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
- Change qd_id in struct gfs2_qutoa_data to struct kqid.
- Remove the now unnecessary QDF_USER bit field in qd_flags.
- Propopoage this change through the code generally making
things simpler along the way.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
- In quota_refresh_user_store convert the user supplied uid
into a kqid and pass it to gfs2_quota_refresh.
- In quota_refresh_group_store convert the user supplied gid
into a kqid and pass it to gfs2_quota_refresh.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Both qd_alloc and qd2offset perform the exact same computation
to get an index from a gfs2_quota_data. Make life a little
simpler and factor out this index computation.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
When a quota is queried return the uid or the gid in the mapped into
the caller's user namespace. In addition perform the munged version
of the mapping so that instead of -1 a value that does not map is
reported as the overflowuid or the overflowgid.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Split NO_QUOTA_CHANGE into NO_UID_QUTOA_CHANGE and NO_GID_QUTOA_CHANGE
so the constants may be well typed.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In set_dqblk it is an error to look at fdq->d_id or fdq->d_flags.
Userspace quota applications do not set these fields when calling
quotactl(Q_XSETQLIM,...), and the kernel does not set those fields
when quota_setquota calls set_dqblk.
gfs2 never looks at fdq->d_id or fdq->d_flags after checking
to see if they match the id and type supplied to set_dqblk.
No other linux filesystem in set_dqblk looks at either fdq->d_id
or fdq->d_flags.
Therefore remove these bogus checks from gfs2 and allow normal
quota setting applications to work.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This patch reinstates the ack system which withdraw should be using. It
appears to have been accidentally forgotten when the lock module was
merged into GFS2, due to two different sysfs files having the same name.
Reported-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch allocates a block reservation structure before growing
or shrinking a file. Without this structure, the grow or shink code
can reference the bad pointer.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The intent here is to split the processing of the glock lru
list into two parts, so that the selection of glocks and the
disposal are separate functions. The plan is then, that further
updates can then be made to these functions in the future
to improve the selection of glocks and also the efficiency of
glock disposal.
The new feature which this patch brings is sorting the
glocks to be disposed of into glock number (and thus also
disk block number) order. Not all glocks will need i/o in
order to dispose of them, but some will, and at least we'll
generate mostly disk block order i/o now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Instead of using a list of buffers to write ahead of the journal
flush, this now uses a list of inodes and calls ->writepages
via filemap_fdatawrite() in order to achieve the same thing. For
most use cases this results in a shorter ordered write list,
as well as much larger i/os being issued.
The ordered write list is sorted by inode number before writing
in order to retain the disk block ordering between inodes as
per the previous code.
The previous ordered write code used to conflict in its assumptions
about how to write out the disk blocks with mpage_writepages()
so that with this updated version we can also use mpage_writepages()
for GFS2's ordered write, writepages implementation. So we will
also send larger i/os from writeback too.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The freeze code has not been looked at a lot recently. Upstream has
moved on, and this is an attempt to catch us back up again. There
is a vfs level interface for the freeze code which can be called
from our (obsolete, but kept for backward compatibility purposes)
sysfs freeze interface. This means freezing this way vs. doing it
from the ioctl should now work in identical fashion.
As a result of this, the freeze function is only called once
and we can drop our own special purpose code for counting the
number of freezes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The locking in gfs2_attach_bufdata() was type specific (data/meta)
which made the function rather confusing. This patch moves the core
of gfs2_attach_bufdata() into trans.c renaming it gfs2_alloc_bufdata()
and moving the locking into gfs2_trans_add_data()/gfs2_trans_add_meta()
As a result all of the locking related to adding data and metadata to
the journal is now in these two functions. This should help to clarify
what is going on, and give us some opportunities to simplify in
some cases.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch copies the body of gfs2_trans_add_bh into the two newly
added gfs2_trans_add_data and gfs2_trans_add_meta functions. We can
then move the .lo_add functions from lops.c into trans.c and call
them directly.
As a result of this, we no longer need to use the .lo_add functions
at all, so that is removed from the log operations structure.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There is little common content in gfs2_trans_add_bh() between the data
and meta classes by the time that the functions which it calls are
taken into account. The intent here is to split this into two
separate functions. Stage one is to introduce gfs2_trans_add_data()
and gfs2_trans_add_meta() and update the callers accordingly.
Later patches will then pull in the content of gfs2_trans_add_bh()
and its dependent functions in order to clean up the code in this
area.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This moves the lo_add function for revokes into trans.c, removing
a function call and making the code easier to read.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This breaks out the LRU scanning function from the shrinker in
preparation for adding other callers to the LRU scanner.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The recent commit fb6791d100
included the wrong logic. The lvbptr check was incorrectly
added after the patch was tested.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
In function rg_mblk_search, it's searching for multiple blocks in
a given state (e.g. "free"). If there's an active block reservation
its goal is the next free block of that. If the resource group
contains the dinode's goal block, that's used for the search. But
if neither is the case, it uses the rgrp's last allocated block.
That way, consecutive allocations appear after one another on media.
The problem comes in when you hit the end of the rgrp; it would never
start over and search from the beginning. This became a problem,
since if you deleted all the files and data from the rgrp, it would
never start over and find free blocks. So it had to keep searching
further out on the media to allocate blocks. This patch resets the
rd_last_alloc after it does an unsuccessful search at the end of
the rgrp.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch adds a return code check after calling function
gfs2_rbm_from_block while determining the free extent size.
That way, when the end of an rgrp is reached, it won't try
to process unaligned blocks after the end.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
QE aio tests uncovered a race condition in gfs2_rs_alloc where it's possible
to come out of the function with a valid ip->i_res allocation but it gets
freed before use resulting in a NULL ptr dereference.
This patch envelopes the initial short-circuit check for non-NULL ip->i_res
into the mutex lock. With this patch, I was able to successfully run the
reproducer test multiple times.
Resolves: rhbz#878476
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When generating the DLM lock name, a value of 0 would skip
the loop and leave the string unchanged. This left locks with
a value of 0 unlabeled. Initializing the string to '0' fixes this.
Signed-off-by: Nathan Straz <nstraz@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
But the kernel decided to call it "origin" instead. Fix most of the
sites.
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Price