Code that is obj-y (always built-in) or dependent on a bool Kconfig
(built-in or absent) can never be modular. So using module_init as an
alias for __initcall can be somewhat misleading.
Fix these up now, so that we can relocate module_init from init.h into
module.h in the future. If we don't do this, we'd have to add module.h
to obviously non-modular code, and that would be a worse thing.
The audit targets the following module_init users for change:
mm/ksm.c bool KSM
mm/mmap.c bool MMU
mm/huge_memory.c bool TRANSPARENT_HUGEPAGE
mm/mmu_notifier.c bool MMU_NOTIFIER
Note that direct use of __initcall is discouraged, vs. one of the
priority categorized subgroups. As __initcall gets mapped onto
device_initcall, our use of subsys_initcall (which makes sense for these
files) will thus change this registration from level 6-device to level
4-subsys (i.e. slightly earlier).
However no observable impact of that difference has been observed during
testing.
One might think that core_initcall (l2) or postcore_initcall (l3) would
be more appropriate for anything in mm/ but if we look at some actual
init functions themselves, we see things like:
mm/huge_memory.c --> hugepage_init --> hugepage_init_sysfs
mm/mmap.c --> init_user_reserve --> sysctl_user_reserve_kbytes
mm/ksm.c --> ksm_init --> sysfs_create_group
and hence the choice of subsys_initcall (l4) seems reasonable, and at
the same time minimizes the risk of changing the priority too
drastically all at once. We can adjust further in the future.
Also, several instances of missing ";" at EOL are fixed.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both do_brk and do_mmap_pgoff verify that we are actually capable of
locking future pages if the corresponding VM_LOCKED flags are used.
Encapsulate this logic into a single mlock_future_check() helper
function.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some applications that run on HPC clusters are designed around the
availability of RAM and the overcommit ratio is fine tuned to get the
maximum usage of memory without swapping. With growing memory, the
1%-of-all-RAM grain provided by overcommit_ratio has become too coarse
for these workload (on a 2TB machine it represents no less than 20GB).
This patch adds the new overcommit_kbytes sysctl variable that allow a
much finer grain.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix nommu build]
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge first patch-bomb from Andrew Morton:
"Quite a lot of other stuff is banked up awaiting further
next->mainline merging, but this batch contains:
- Lots of random misc patches
- OCFS2
- Most of MM
- backlight updates
- lib/ updates
- printk updates
- checkpatch updates
- epoll tweaking
- rtc updates
- hfs
- hfsplus
- documentation
- procfs
- update gcov to gcc-4.7 format
- IPC"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits)
ipc, msg: fix message length check for negative values
ipc/util.c: remove unnecessary work pending test
devpts: plug the memory leak in kill_sb
./Makefile: export initial ramdisk compression config option
init/Kconfig: add option to disable kernel compression
drivers: w1: make w1_slave::flags long to avoid memory corruption
drivers/w1/masters/ds1wm.cuse dev_get_platdata()
drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page()
drivers/memstick/core/mspro_block.c: fix attributes array allocation
drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr
kernel/panic.c: reduce 1 byte usage for print tainted buffer
gcov: reuse kbasename helper
kernel/gcov/fs.c: use pr_warn()
kernel/module.c: use pr_foo()
gcov: compile specific gcov implementation based on gcc version
gcov: add support for gcc 4.7 gcov format
gcov: move gcov structs definitions to a gcc version specific file
kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener()
kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end()
kernel/sysctl_binary.c: use scnprintf() instead of snprintf()
...
The same calculation is currently done in three differents places.
Factor that code so future changes has to be made at only one place.
[akpm@linux-foundation.org: uninline vm_commit_limit()]
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes the problem that get_unmapped_area() can return illegal
address and result in failing mmap(2) etc.
In case that the address higher than PAGE_SIZE is set to
/proc/sys/vm/mmap_min_addr, the address lower than mmap_min_addr can be
returned by get_unmapped_area(), even if you do not pass any virtual
address hint (i.e. the second argument).
This is because the current get_unmapped_area() code does not take into
account mmap_min_addr.
This leads to two actual problems as follows:
1. mmap(2) can fail with EPERM on the process without CAP_SYS_RAWIO,
although any illegal parameter is not passed.
2. The bottom-up search path after the top-down search might not work in
arch_get_unmapped_area_topdown().
Note: The first and third chunk of my patch, which changes "len" check,
are for more precise check using mmap_min_addr, and not for solving the
above problem.
[How to reproduce]
--- test.c -------------------------------------------------
#include <stdio.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/errno.h>
int main(int argc, char *argv[])
{
void *ret = NULL, *last_map;
size_t pagesize = sysconf(_SC_PAGESIZE);
do {
last_map = ret;
ret = mmap(0, pagesize, PROT_NONE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
// printf("ret=%p\n", ret);
} while (ret != MAP_FAILED);
if (errno != ENOMEM) {
printf("ERR: unexpected errno: %d (last map=%p)\n",
errno, last_map);
}
return 0;
}
---------------------------------------------------------------
$ gcc -m32 -o test test.c
$ sudo sysctl -w vm.mmap_min_addr=65536
vm.mmap_min_addr = 65536
$ ./test (run as non-priviledge user)
ERR: unexpected errno: 1 (last map=0x10000)
Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is more or less the generic variant of commit 41aacc1eea ("x86
get_unmapped_area: Access mmap_legacy_base through mm_struct member").
So effectively architectures which use an own arch_pick_mmap_layout()
implementation but call the generic arch_get_unmapped_area() now can
also randomize their mmap_base.
All architectures which have an own arch_pick_mmap_layout() and call the
generic arch_get_unmapped_area() (arm64, s390, tile) currently set
mmap_base to TASK_UNMAPPED_BASE. This is also true for the generic
arch_pick_mmap_layout() function. So this change is a no-op currently.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Radu Caragea <sinaelgl@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pgoff is not used after the statement "pgoff = vma->vm_pgoff;", so the
assignment is redundant.
Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel reported that in case if vma area get unmapped and then mapped (or
expanded) in-place, the soft dirty tracker won't be able to recognize this
situation since it works on pte level and ptes are get zapped on unmap,
loosing soft dirty bit of course.
So to resolve this situation we need to track actions on vma level, there
VM_SOFTDIRTY flag comes in. When new vma area created (or old expanded)
we set this bit, and keep it here until application calls for clearing
soft dirty bit.
Thus when user space application track memory changes now it can detect if
vma area is renewed.
Reported-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
correct_wcount and inode in mmap_region() just complicate the code. This
boolean was needed previously, when deny_write_access() was called before
vma_merge(), now we can simply check VM_DENYWRITE and do
allow_write_access() if it is set.
allow_write_access() checks file != NULL, so this is safe even if it was
possible to use VM_DENYWRITE && !file. Just we need to ensure we use the
same file which was deny_write_access()'ed, so the patch also moves "file
= vma->vm_file" down after allow_write_access().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Colin Cross <ccross@android.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mmap() doesn't allow the non-anonymous mappings with VM_GROWS* bit set.
In particular this means that mmap_region()->vma_merge(file, vm_flags)
must always fail if "vm_flags & VM_GROWS" is set incorrectly.
So it does not make sense to check VM_GROWS* after we already allocated
the new vma, the only caller, do_mmap_pgoff(), which can pass this flag
can do the check itself.
And this looks a bit more correct, mmap_region() already unmapped the
old mapping at this stage. But if mmap() is going to fail, it should
avoid do_munmap() if possible.
Note: we check VM_GROWS at the end to ensure that do_mmap_pgoff() won't
return EINVAL in the case when it currently returns another error code.
Many thanks to Hugh who nacked the buggy v1.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simple cleanup. Every user of vma_set_policy() does the same work, this
looks a bit annoying imho. And the new trivial helper which does
mpol_dup() + vma_set_policy() to simplify the callers.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Tebulin reported:
"Since v3.7.2 on two independent machines a very specific Git
repository fails in 9/10 cases on git-fsck due to an SHA1/memory
failures. This only occurs on a very specific repository and can be
reproduced stably on two independent laptops. Git mailing list ran
out of ideas and for me this looks like some very exotic kernel issue"
and bisected the failure to the backport of commit 53a59fc67f ("mm:
limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT").
That commit itself is not actually buggy, but what it does is to make it
much more likely to hit the partial TLB invalidation case, since it
introduces a new case in tlb_next_batch() that previously only ever
happened when running out of memory.
The real bug is that the TLB gather virtual memory range setup is subtly
buggered. It was introduced in commit 597e1c3580 ("mm/mmu_gather:
enable tlb flush range in generic mmu_gather"), and the range handling
was already fixed at least once in commit e6c495a96c ("mm: fix the TLB
range flushed when __tlb_remove_page() runs out of slots"), but that fix
was not complete.
The problem with the TLB gather virtual address range is that it isn't
set up by the initial tlb_gather_mmu() initialization (which didn't get
the TLB range information), but it is set up ad-hoc later by the
functions that actually flush the TLB. And so any such case that forgot
to update the TLB range entries would potentially miss TLB invalidates.
Rather than try to figure out exactly which particular ad-hoc range
setup was missing (I personally suspect it's the hugetlb case in
zap_huge_pmd(), which didn't have the same logic as zap_pte_range()
did), this patch just gets rid of the problem at the source: make the
TLB range information available to tlb_gather_mmu(), and initialize it
when initializing all the other tlb gather fields.
This makes the patch larger, but conceptually much simpler. And the end
result is much more understandable; even if you want to play games with
partial ranges when invalidating the TLB contents in chunks, now the
range information is always there, and anybody who doesn't want to
bother with it won't introduce subtle bugs.
Ben verified that this fixes his problem.
Reported-bisected-and-tested-by: Ben Tebulin <tebulin@googlemail.com>
Build-testing-by: Stephen Rothwell <sfr@canb.auug.org.au>
Build-testing-by: Richard Weinberger <richard.weinberger@gmail.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vma_adjust() does vma_set_policy(vma, vma_policy(next)) and this
is doubly wrong:
1. This leaks vma->vm_policy if it is not NULL and not equal to
next->vm_policy.
This can happen if vma_merge() expands "area", not prev (case 8).
2. This sets the wrong policy if vma_merge() joins prev and area,
area is the vma the caller needs to update and it still has the
old policy.
Revert commit 1444f92c84 ("mm: merging memory blocks resets
mempolicy") which introduced these problems.
Change mbind_range() to recheck mpol_equal() after vma_merge() to fix
the problem that commit tried to address.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steven T Hampson <steven.t.hampson@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since all architectures have been converted to use vm_unmapped_area(),
there is no remaining use for the free_area_cache.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is counterintuitive at best that mmap'ing a hugetlbfs file with
MAP_HUGETLB fails, while mmap'ing it without will a) succeed and b)
return huge pages.
v2: use is_file_hugepages(), as suggested by Jianguo
Signed-off-by: Joern Engel <joern@logfs.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented
as a inline funcion vma_pages() in linux/mm.h, so using it.
Signed-off-by: Libin <huawei.libin@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current kernel returns -EINVAL unless a given mmap length is
"almost" hugepage aligned. This is because in sys_mmap_pgoff() the
given length is passed to vm_mmap_pgoff() as it is without being aligned
with hugepage boundary.
This is a regression introduced in commit 40716e2924 ("hugetlbfs: fix
alignment of huge page requests"), where alignment code is pushed into
hugetlb_file_setup() and the variable len in caller side is not changed.
To fix this, this patch partially reverts that commit, and adds
alignment code in caller side. And it also introduces hstate_sizelog()
in order to get proper hstate to specified hugepage size.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=56881
[akpm@linux-foundation.org: fix warning when CONFIG_HUGETLB_PAGE=n]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: <iceman_dvd@yahoo.com>
Cc: Steven Truelove <steven.truelove@utoronto.ca>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a corner case for MAP_FIXED when requested mapping length is larger
than rlimit for virtual memory. In such case any overlapping mappings
are unmapped before we check for the limit and return ENOMEM.
The check is moved before the loop that unmaps overlapping parts of
existing mappings. When we are about to hit the limit (currently mapped
pages + len > limit) we scan for overlapping pages and check again
accounting for them.
This fixes situation when userspace program expects that the previous
mappings are preserved after the mmap() syscall has returned with error.
(POSIX clearly states that successfull mapping shall replace any
previous mappings.)
This corner case was found and can be tested with LTP testcase:
testcases/open_posix_testsuite/conformance/interfaces/mmap/24-2.c
In this case the mmap, which is clearly over current limit, unmaps
dynamic libraries and the testcase segfaults right after returning into
userspace.
I've also looked at the second instance of the unmapping loop in the
do_brk(). The do_brk() is called from brk() syscall and from vm_brk().
The brk() syscall checks for overlapping mappings and bails out when
there are any (so it can't be triggered from the brk syscall). The
vm_brk() is called only from binmft handlers so it shouldn't be
triggered unless binmft handler created overlapping mappings.
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Reviewed-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alter the admin and user reserves of the previous patches in this series
when memory is added or removed.
If memory is added and the reserves have been eliminated or increased
above the default max, then we'll trust the admin.
If memory is removed and there isn't enough free memory, then we need to
reset the reserves.
Otherwise keep the reserve set by the admin.
The reserve reset code is the same as the reserve initialization code.
I tested hot addition and removal by triggering it via sysfs. The
reserves shrunk when they were set high and memory was removed. They
were reset higher when memory was added again.
[akpm@linux-foundation.org: use register_hotmemory_notifier()]
[akpm@linux-foundation.org: init_user_reserve() and init_admin_reserve can no longer be __meminit]
[fengguang.wu@intel.com: make init_reserve_notifier() static]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Andrew Shewmaker <agshew@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add an admin_reserve_kbytes knob to allow admins to change the hardcoded
memory reserve to something other than 3%, which may be multiple
gigabytes on large memory systems. Only about 8MB is necessary to
enable recovery in the default mode, and only a few hundred MB are
required even when overcommit is disabled.
This affects OVERCOMMIT_GUESS and OVERCOMMIT_NEVER.
admin_reserve_kbytes is initialized to min(3% free pages, 8MB)
I arrived at 8MB by summing the RSS of sshd or login, bash, and top.
Please see first patch in this series for full background, motivation,
testing, and full changelog.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make init_admin_reserve() static]
Signed-off-by: Andrew Shewmaker <agshew@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add user_reserve_kbytes knob.
Limit the growth of the memory reserved for other user processes to
min(3% current process size, user_reserve_pages). Only about 8MB is
necessary to enable recovery in the default mode, and only a few hundred
MB are required even when overcommit is disabled.
user_reserve_pages defaults to min(3% free pages, 128MB)
I arrived at 128MB by taking the max VSZ of sshd, login, bash, and top ...
then adding the RSS of each.
This only affects OVERCOMMIT_NEVER mode.
Background
1. user reserve
__vm_enough_memory reserves a hardcoded 3% of the current process size for
other applications when overcommit is disabled. This was done so that a
user could recover if they launched a memory hogging process. Without the
reserve, a user would easily run into a message such as:
bash: fork: Cannot allocate memory
2. admin reserve
Additionally, a hardcoded 3% of free memory is reserved for root in both
overcommit 'guess' and 'never' modes. This was intended to prevent a
scenario where root-cant-log-in and perform recovery operations.
Note that this reserve shrinks, and doesn't guarantee a useful reserve.
Motivation
The two hardcoded memory reserves should be updated to account for current
memory sizes.
Also, the admin reserve would be more useful if it didn't shrink too much.
When the current code was originally written, 1GB was considered
"enterprise". Now the 3% reserve can grow to multiple GB on large memory
systems, and it only needs to be a few hundred MB at most to enable a user
or admin to recover a system with an unwanted memory hogging process.
I've found that reducing these reserves is especially beneficial for a
specific type of application load:
* single application system
* one or few processes (e.g. one per core)
* allocating all available memory
* not initializing every page immediately
* long running
I've run scientific clusters with this sort of load. A long running job
sometimes failed many hours (weeks of CPU time) into a calculation. They
weren't initializing all of their memory immediately, and they weren't
using calloc, so I put systems into overcommit 'never' mode. These
clusters run diskless and have no swap.
However, with the current reserves, a user wishing to allocate as much
memory as possible to one process may be prevented from using, for
example, almost 2GB out of 32GB.
The effect is less, but still significant when a user starts a job with
one process per core. I have repeatedly seen a set of processes
requesting the same amount of memory fail because one of them could not
allocate the amount of memory a user would expect to be able to allocate.
For example, Message Passing Interfce (MPI) processes, one per core. And
it is similar for other parallel programming frameworks.
Changing this reserve code will make the overcommit never mode more useful
by allowing applications to allocate nearly all of the available memory.
Also, the new admin_reserve_kbytes will be safer than the current behavior
since the hardcoded 3% of available memory reserve can shrink to something
useless in the case where applications have grabbed all available memory.
Risks
* "bash: fork: Cannot allocate memory"
The downside of the first patch-- which creates a tunable user reserve
that is only used in overcommit 'never' mode--is that an admin can set
it so low that a user may not be able to kill their process, even if
they already have a shell prompt.
Of course, a user can get in the same predicament with the current 3%
reserve--they just have to launch processes until 3% becomes negligible.
* root-cant-log-in problem
The second patch, adding the tunable rootuser_reserve_pages, allows
the admin to shoot themselves in the foot by setting it too small. They
can easily get the system into a state where root-can't-log-in.
However, the new admin_reserve_kbytes will be safer than the current
behavior since the hardcoded 3% of available memory reserve can shrink
to something useless in the case where applications have grabbed all
available memory.
Alternatives
* Memory cgroups provide a more flexible way to limit application memory.
Not everyone wants to set up cgroups or deal with their overhead.
* We could create a fourth overcommit mode which provides smaller reserves.
The size of useful reserves may be drastically different depending
on the whether the system is embedded or enterprise.
* Force users to initialize all of their memory or use calloc.
Some users don't want/expect the system to overcommit when they malloc.
Overcommit 'never' mode is for this scenario, and it should work well.
The new user and admin reserve tunables are simple to use, with low
overhead compared to cgroups. The patches preserve current behavior where
3% of memory is less than 128MB, except that the admin reserve doesn't
shrink to an unusable size under pressure. The code allows admins to tune
for embedded and enterprise usage.
FAQ
* How is the root-cant-login problem addressed?
What happens if admin_reserve_pages is set to 0?
Root is free to shoot themselves in the foot by setting
admin_reserve_kbytes too low.
On x86_64, the minimum useful reserve is:
8MB for overcommit 'guess'
128MB for overcommit 'never'
admin_reserve_pages defaults to min(3% free memory, 8MB)
So, anyone switching to 'never' mode needs to adjust
admin_reserve_pages.
* How do you calculate a minimum useful reserve?
A user or the admin needs enough memory to login and perform
recovery operations, which includes, at a minimum:
sshd or login + bash (or some other shell) + top (or ps, kill, etc.)
For overcommit 'guess', we can sum resident set sizes (RSS)
because we only need enough memory to handle what the recovery
programs will typically use. On x86_64 this is about 8MB.
For overcommit 'never', we can take the max of their virtual sizes (VSZ)
and add the sum of their RSS. We use VSZ instead of RSS because mode
forces us to ensure we can fulfill all of the requested memory allocations--
even if the programs only use a fraction of what they ask for.
On x86_64 this is about 128MB.
When swap is enabled, reserves are useful even when they are as
small as 10MB, regardless of overcommit mode.
When both swap and overcommit are disabled, then the admin should
tune the reserves higher to be absolutley safe. Over 230MB each
was safest in my testing.
* What happens if user_reserve_pages is set to 0?
Note, this only affects overcomitt 'never' mode.
Then a user will be able to allocate all available memory minus
admin_reserve_kbytes.
However, they will easily see a message such as:
"bash: fork: Cannot allocate memory"
And they won't be able to recover/kill their application.
The admin should be able to recover the system if
admin_reserve_kbytes is set appropriately.
* What's the difference between overcommit 'guess' and 'never'?
"Guess" allows an allocation if there are enough free + reclaimable
pages. It has a hardcoded 3% of free pages reserved for root.
"Never" allows an allocation if there is enough swap + a configurable
percentage (default is 50) of physical RAM. It has a hardcoded 3% of
free pages reserved for root, like "Guess" mode. It also has a
hardcoded 3% of the current process size reserved for additional
applications.
* Why is overcommit 'guess' not suitable even when an app eventually
writes to every page? It takes free pages, file pages, available
swap pages, reclaimable slab pages into consideration. In other words,
these are all pages available, then why isn't overcommit suitable?
Because it only looks at the present state of the system. It
does not take into account the memory that other applications have
malloced, but haven't initialized yet. It overcommits the system.
Test Summary
There was little change in behavior in the default overcommit 'guess'
mode with swap enabled before and after the patch. This was expected.
Systems run most predictably (i.e. no oom kills) in overcommit 'never'
mode with swap enabled. This also allowed the most memory to be allocated
to a user application.
Overcommit 'guess' mode without swap is a bad idea. It is easy to
crash the system. None of the other tested combinations crashed.
This matches my experience on the Roadrunner supercomputer.
Without the tunable user reserve, a system in overcommit 'never' mode
and without swap does not allow the admin to recover, although the
admin can.
With the new tunable reserves, a system in overcommit 'never' mode
and without swap can be configured to:
1. maximize user-allocatable memory, running close to the edge of
recoverability
2. maximize recoverability, sacrificing allocatable memory to
ensure that a user cannot take down a system
Test Description
Fedora 18 VM - 4 x86_64 cores, 5725MB RAM, 4GB Swap
System is booted into multiuser console mode, with unnecessary services
turned off. Caches were dropped before each test.
Hogs are user memtester processes that attempt to allocate all free memory
as reported by /proc/meminfo
In overcommit 'never' mode, memory_ratio=100
Test Results
3.9.0-rc1-mm1
Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery
---------- ---- ---- ------------- ---- ------------- --------------
guess yes 1 5432/5432 no yes yes
guess yes 4 5444/5444 1 yes yes
guess no 1 5302/5449 no yes yes
guess no 4 - crash no no
never yes 1 5460/5460 1 yes yes
never yes 4 5460/5460 1 yes yes
never no 1 5218/5432 no no yes
never no 4 5203/5448 no no yes
3.9.0-rc1-mm1-tunablereserves
User and Admin Recovery show their respective reserves, if applicable.
Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery
---------- ---- ---- ------------- ---- ------------- --------------
guess yes 1 5419/5419 no - yes 8MB yes
guess yes 4 5436/5436 1 - yes 8MB yes
guess no 1 5440/5440 * - yes 8MB yes
guess no 4 - crash - no 8MB no
* process would successfully mlock, then the oom killer would pick it
never yes 1 5446/5446 no 10MB yes 20MB yes
never yes 4 5456/5456 no 10MB yes 20MB yes
never no 1 5387/5429 no 128MB no 8MB barely
never no 1 5323/5428 no 226MB barely 8MB barely
never no 1 5323/5428 no 226MB barely 8MB barely
never no 1 5359/5448 no 10MB no 10MB barely
never no 1 5323/5428 no 0MB no 10MB barely
never no 1 5332/5428 no 0MB no 50MB yes
never no 1 5293/5429 no 0MB no 90MB yes
never no 1 5001/5427 no 230MB yes 338MB yes
never no 4* 4998/5424 no 230MB yes 338MB yes
* more memtesters were launched, able to allocate approximately another 100MB
Future Work
- Test larger memory systems.
- Test an embedded image.
- Test other architectures.
- Time malloc microbenchmarks.
- Would it be useful to be able to set overcommit policy for
each memory cgroup?
- Some lines are slightly above 80 chars.
Perhaps define a macro to convert between pages and kb?
Other places in the kernel do this.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: make init_user_reserve() static]
Signed-off-by: Andrew Shewmaker <agshew@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On architectures where a pgd entry may be shared between user and kernel
(e.g. ARM+LPAE), freeing page tables needs a ceiling other than 0.
This patch introduces a generic USER_PGTABLES_CEILING that arch code can
override. It is the responsibility of the arch code setting the ceiling
to ensure the complete freeing of the page tables (usually in
pgd_free()).
[catalin.marinas@arm.com: commit log; shift_arg_pages(), asm-generic/pgtables.h changes]
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: <stable@vger.kernel.org> [3.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the WARN_ON_ONCE(!mm) check as the comment suggested. Kernel
code calls find_vma only when it is absolutely sure that the mm_struct
arg to it is non-NULL.
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: k80c <k80ck80c@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
find_vma() can be called by multiple threads with read lock
held on mm->mmap_sem and any of them can update mm->mmap_cache.
Prevent compiler from re-fetching mm->mmap_cache, because other
readers could update it in the meantime:
thread 1 thread 2
|
find_vma() | find_vma()
struct vm_area_struct *vma = NULL; |
vma = mm->mmap_cache; |
if (!(vma && vma->vm_end > addr |
&& vma->vm_start <= addr)) { |
| mm->mmap_cache = vma;
return vma; |
^^ compiler may optimize this |
local variable out and re-read |
mm->mmap_cache |
This issue can be reproduced with gcc-4.8.0-1 on s390x by running
mallocstress testcase from LTP, which triggers:
kernel BUG at mm/rmap.c:1088!
Call Trace:
([<000003d100c57000>] 0x3d100c57000)
[<000000000023a1c0>] do_wp_page+0x2fc/0xa88
[<000000000023baae>] handle_pte_fault+0x41a/0xac8
[<000000000023d832>] handle_mm_fault+0x17a/0x268
[<000000000060507a>] do_protection_exception+0x1e2/0x394
[<0000000000603a04>] pgm_check_handler+0x138/0x13c
[<000003fffcf1f07a>] 0x3fffcf1f07a
Last Breaking-Event-Address:
[<000000000024755e>] page_add_new_anon_rmap+0xc2/0x168
Thanks to Jakub Jelinek for his insight on gcc and helping to
track this down.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 1869305009 ("mm: introduce VM_POPULATE flag to
better deal with racy userspace programs").
VM_POPULATE only has any effect when userspace plays racy games with
vmas by trying to unmap and remap memory regions that mmap or mlock are
operating on.
Also, the only effect of VM_POPULATE when userspace plays such games is
that it avoids populating new memory regions that get remapped into the
address range that was being operated on by the original mmap or mlock
calls.
Let's remove VM_POPULATE as there isn't any strong argument to mandate a
new vm_flag.
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The stack vma is designed to grow automatically (marked with VM_GROWSUP
or VM_GROWSDOWN depending on architecture) when an access is made beyond
the existing boundary. However, particularly if you have not limited
your stack at all ("ulimit -s unlimited"), this can cause the stack to
grow even if the access was really just one past *another* segment.
And that's wrong, especially since we first grow the segment, but then
immediately later enforce the stack guard page on the last page of the
segment. So _despite_ first growing the stack segment as a result of
the access, the kernel will then make the access cause a SIGSEGV anyway!
So do the same logic as the guard page check does, and consider an
access to within one page of the next segment to be a bad access, rather
than growing the stack to abut the next segment.
Reported-and-tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
The comment in commit 4fc3f1d66b ("mm/rmap, migration: Make
rmap_walk_anon() and try_to_unmap_anon() more scalable") says:
| Rename anon_vma_[un]lock() => anon_vma_[un]lock_write(),
| to make it clearer that it's an exclusive write-lock in
| that case - suggested by Rik van Riel.
But that commit renames only anon_vma_lock()
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
swap_lock is heavily contended when I test swap to 3 fast SSD (even
slightly slower than swap to 2 such SSD). The main contention comes
from swap_info_get(). This patch tries to fix the gap with adding a new
per-partition lock.
Global data like nr_swapfiles, total_swap_pages, least_priority and
swap_list are still protected by swap_lock.
nr_swap_pages is an atomic now, it can be changed without swap_lock. In
theory, it's possible get_swap_page() finds no swap pages but actually
there are free swap pages. But sounds not a big problem.
Accessing partition specific data (like scan_swap_map and so on) is only
protected by swap_info_struct.lock.
Changing swap_info_struct.flags need hold swap_lock and
swap_info_struct.lock, because scan_scan_map() will check it. read the
flags is ok with either the locks hold.
If both swap_lock and swap_info_struct.lock must be hold, we always hold
the former first to avoid deadlock.
swap_entry_free() can change swap_list. To delete that code, we add a
new highest_priority_index. Whenever get_swap_page() is called, we
check it. If it's valid, we use it.
It's a pity get_swap_page() still holds swap_lock(). But in practice,
swap_lock() isn't heavily contended in my test with this patch (or I can
say there are other much more heavier bottlenecks like TLB flush). And
BTW, looks get_swap_page() doesn't really need the lock. We never free
swap_info[] and we check SWAP_WRITEOK flag. The only risk without the
lock is we could swapout to some low priority swap, but we can quickly
recover after several rounds of swap, so sounds not a big deal to me.
But I'd prefer to fix this if it's a real problem.
"swap: make each swap partition have one address_space" improved the
swapout speed from 1.7G/s to 2G/s. This patch further improves the
speed to 2.3G/s, so around 15% improvement. It's a multi-process test,
so TLB flush isn't the biggest bottleneck before the patches.
[arnd@arndb.de: fix it for nommu]
[hughd@google.com: add missing unlock]
[minchan@kernel.org: get rid of lockdep whinge on sys_swapon]
Signed-off-by: Shaohua Li <shli@fusionio.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_mmap_pgoff() rounds up the desired size to the next PAGE_SIZE
multiple, however there was no equivalent code in mm_populate(), which
caused issues.
This could be fixed by introduced the same rounding in mm_populate(),
however I think it's preferable to make do_mmap_pgoff() return populate
as a size rather than as a boolean, so we don't have to duplicate the
size rounding logic in mm_populate().
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Tested-by: Andy Lutomirski <luto@amacapital.net>
Cc: Greg Ungerer <gregungerer@westnet.com.au>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The vm_populate() code populates user mappings without constantly
holding the mmap_sem. This makes it susceptible to racy userspace
programs: the user mappings may change while vm_populate() is running,
and in this case vm_populate() may end up populating the new mapping
instead of the old one.
In order to reduce the possibility of userspace getting surprised by
this behavior, this change introduces the VM_POPULATE vma flag which
gets set on vmas we want vm_populate() to work on. This way
vm_populate() may still end up populating the new mapping after such a
race, but only if the new mapping is also one that the user has
requested (using MAP_SHARED, MAP_LOCKED or mlock) to be populated.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Tested-by: Andy Lutomirski <luto@amacapital.net>
Cc: Greg Ungerer <gregungerer@westnet.com.au>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In find_extend_vma(), we don't need mlock_vma_pages_range() to verify
the vma type - we know we're working with a stack. So, we can call
directly into __mlock_vma_pages_range(), and remove the last
make_pages_present() call site.
Note that we don't use mm_populate() here, so we can't release the
mmap_sem while allocating new stack pages. This is deemed acceptable,
because the stack vmas grow by a bounded number of pages at a time, and
these are anon pages so we don't have to read from disk to populate
them.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Tested-by: Andy Lutomirski <luto@amacapital.net>
Cc: Greg Ungerer <gregungerer@westnet.com.au>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After the MAP_POPULATE handling has been moved to mmap_region() call
sites, the only remaining use of the flags argument is to pass the
MAP_NORESERVE flag. This can be just as easily handled by
do_mmap_pgoff(), so do that and remove the mmap_region() flags
parameter.
[akpm@linux-foundation.org: remove double parens]
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Tested-by: Andy Lutomirski <luto@amacapital.net>
Cc: Greg Ungerer <gregungerer@westnet.com.au>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When creating new mappings using the MAP_POPULATE / MAP_LOCKED flags (or
with MCL_FUTURE in effect), we want to populate the pages within the
newly created vmas. This may take a while as we may have to read pages
from disk, so ideally we want to do this outside of the write-locked
mmap_sem region.
This change introduces mm_populate(), which is used to defer populating
such mappings until after the mmap_sem write lock has been released.
This is implemented as a generalization of the former do_mlock_pages(),
which accomplished the same task but was using during mlock() /
mlockall().
Signed-off-by: Michel Lespinasse <walken@google.com>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Rik van Riel <riel@redhat.com>
Tested-by: Andy Lutomirski <luto@amacapital.net>
Cc: Greg Ungerer <gregungerer@westnet.com.au>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull scheduler changes from Ingo Molnar:
"Main changes:
- scheduler side full-dynticks (user-space execution is undisturbed
and receives no timer IRQs) preparation changes that convert the
cputime accounting code to be full-dynticks ready, from Frederic
Weisbecker.
- Initial sched.h split-up changes, by Clark Williams
- select_idle_sibling() performance improvement by Mike Galbraith:
" 1 tbench pair (worst case) in a 10 core + SMT package:
pre 15.22 MB/sec 1 procs
post 252.01 MB/sec 1 procs "
- sched_rr_get_interval() ABI fix/change. We think this detail is not
used by apps (so it's not an ABI in practice), but lets keep it
under observation.
- misc RT scheduling cleanups, optimizations"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
sched/rt: Add <linux/sched/rt.h> header to <linux/init_task.h>
cputime: Remove irqsave from seqlock readers
sched, powerpc: Fix sched.h split-up build failure
cputime: Restore CPU_ACCOUNTING config defaults for PPC64
sched/rt: Move rt specific bits into new header file
sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice
sched: Move sched.h sysctl bits into separate header
sched: Fix signedness bug in yield_to()
sched: Fix select_idle_sibling() bouncing cow syndrome
sched/rt: Further simplify pick_rt_task()
sched/rt: Do not account zero delta_exec in update_curr_rt()
cputime: Safely read cputime of full dynticks CPUs
kvm: Prepare to add generic guest entry/exit callbacks
cputime: Use accessors to read task cputime stats
cputime: Allow dynamic switch between tick/virtual based cputime accounting
cputime: Generic on-demand virtual cputime accounting
cputime: Move default nsecs_to_cputime() to jiffies based cputime file
cputime: Librarize per nsecs resolution cputime definitions
cputime: Avoid multiplication overflow on utime scaling
context_tracking: Export context state for generic vtime
...
Fix up conflict in kernel/context_tracking.c due to comment additions.
Move the sysctl-related bits from include/linux/sched.h into
a new file: include/linux/sched/sysctl.h. Then update source
files requiring access to those bits by including the new
header file.
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20130207094659.06dced96@riff.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We use rwsem since commit 5a505085f0 ("mm/rmap: Convert the struct
anon_vma::mutex to an rwsem"). And most of comments are converted to
the new rwsem lock; while just 2 more missed from:
$ git grep 'anon_vma->mutex'
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 5a505085f0 ("mm/rmap: Convert the struct anon_vma::mutex to an
rwsem") turned anon_vma mutex to rwsem.
However, the properly annotated nested locking in mm_take_all_locks()
has been converted from
mutex_lock_nest_lock(&anon_vma->root->mutex, &mm->mmap_sem);
to
down_write(&anon_vma->root->rwsem);
which is incomplete, and causes the false positive report from lockdep
below.
Annotate the fact that mmap_sem is used as an outter lock to serialize
taking of all the anon_vma rwsems at once no matter the order, using the
down_write_nest_lock() primitive.
This patch fixes this lockdep report:
=============================================
[ INFO: possible recursive locking detected ]
3.8.0-rc2-00036-g5f73896 #171 Not tainted
---------------------------------------------
qemu-kvm/2315 is trying to acquire lock:
(&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0
but task is already holding lock:
(&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&anon_vma->rwsem);
lock(&anon_vma->rwsem);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by qemu-kvm/2315:
#0: (&mm->mmap_sem){++++++}, at: do_mmu_notifier_register+0xfc/0x170
#1: (mm_all_locks_mutex){+.+...}, at: mm_take_all_locks+0x36/0x1b0
#2: (&mapping->i_mmap_mutex){+.+...}, at: mm_take_all_locks+0xc9/0x1b0
#3: (&anon_vma->rwsem){+.+...}, at: mm_take_all_locks+0x149/0x1b0
stack backtrace:
Pid: 2315, comm: qemu-kvm Not tainted 3.8.0-rc2-00036-g5f73896 #171
Call Trace:
print_deadlock_bug+0xf2/0x100
validate_chain+0x4f6/0x720
__lock_acquire+0x359/0x580
lock_acquire+0x121/0x190
down_write+0x3f/0x70
mm_take_all_locks+0x149/0x1b0
do_mmu_notifier_register+0x68/0x170
mmu_notifier_register+0xe/0x10
kvm_create_vm+0x22b/0x330 [kvm]
kvm_dev_ioctl+0xf8/0x1a0 [kvm]
do_vfs_ioctl+0x9d/0x350
sys_ioctl+0x91/0xb0
system_call_fastpath+0x16/0x1b
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mel Gorman <mel@csn.ul.ie>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)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=ivQa
-----END PGP SIGNATURE-----
Merge tag 'balancenuma-v11' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux-balancenuma
Pull Automatic NUMA Balancing bare-bones from Mel Gorman:
"There are three implementations for NUMA balancing, this tree
(balancenuma), numacore which has been developed in tip/master and
autonuma which is in aa.git.
In almost all respects balancenuma is the dumbest of the three because
its main impact is on the VM side with no attempt to be smart about
scheduling. In the interest of getting the ball rolling, it would be
desirable to see this much merged for 3.8 with the view to building
scheduler smarts on top and adapting the VM where required for 3.9.
The most recent set of comparisons available from different people are
mel: https://lkml.org/lkml/2012/12/9/108
mingo: https://lkml.org/lkml/2012/12/7/331
tglx: https://lkml.org/lkml/2012/12/10/437
srikar: https://lkml.org/lkml/2012/12/10/397
The results are a mixed bag. In my own tests, balancenuma does
reasonably well. It's dumb as rocks and does not regress against
mainline. On the other hand, Ingo's tests shows that balancenuma is
incapable of converging for this workloads driven by perf which is bad
but is potentially explained by the lack of scheduler smarts. Thomas'
results show balancenuma improves on mainline but falls far short of
numacore or autonuma. Srikar's results indicate we all suffer on a
large machine with imbalanced node sizes.
My own testing showed that recent numacore results have improved
dramatically, particularly in the last week but not universally.
We've butted heads heavily on system CPU usage and high levels of
migration even when it shows that overall performance is better.
There are also cases where it regresses. Of interest is that for
specjbb in some configurations it will regress for lower numbers of
warehouses and show gains for higher numbers which is not reported by
the tool by default and sometimes missed in treports. Recently I
reported for numacore that the JVM was crashing with
NullPointerExceptions but currently it's unclear what the source of
this problem is. Initially I thought it was in how numacore batch
handles PTEs but I'm no longer think this is the case. It's possible
numacore is just able to trigger it due to higher rates of migration.
These reports were quite late in the cycle so I/we would like to start
with this tree as it contains much of the code we can agree on and has
not changed significantly over the last 2-3 weeks."
* tag 'balancenuma-v11' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux-balancenuma: (50 commits)
mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable
mm/rmap: Convert the struct anon_vma::mutex to an rwsem
mm: migrate: Account a transhuge page properly when rate limiting
mm: numa: Account for failed allocations and isolations as migration failures
mm: numa: Add THP migration for the NUMA working set scanning fault case build fix
mm: numa: Add THP migration for the NUMA working set scanning fault case.
mm: sched: numa: Delay PTE scanning until a task is scheduled on a new node
mm: sched: numa: Control enabling and disabling of NUMA balancing if !SCHED_DEBUG
mm: sched: numa: Control enabling and disabling of NUMA balancing
mm: sched: Adapt the scanning rate if a NUMA hinting fault does not migrate
mm: numa: Use a two-stage filter to restrict pages being migrated for unlikely task<->node relationships
mm: numa: migrate: Set last_nid on newly allocated page
mm: numa: split_huge_page: Transfer last_nid on tail page
mm: numa: Introduce last_nid to the page frame
sched: numa: Slowly increase the scanning period as NUMA faults are handled
mm: numa: Rate limit setting of pte_numa if node is saturated
mm: numa: Rate limit the amount of memory that is migrated between nodes
mm: numa: Structures for Migrate On Fault per NUMA migration rate limiting
mm: numa: Migrate pages handled during a pmd_numa hinting fault
mm: numa: Migrate on reference policy
...
expand_stack() runs with a shared mmap_sem lock. Because of this, there
could be multiple concurrent stack expansions in the same mm, which may
cause problems in the vma gap update code.
I propose to solve this by taking the mm->page_table_lock around such vma
expansions, in order to avoid the concurrency issue. We only have to
worry about concurrent expand_stack() calls here, since we hold a shared
mmap_sem lock and all vma modificaitons other than expand_stack() are done
under an exclusive mmap_sem lock.
I previously tried to achieve the same effect by making sure all growable
vmas in a given mm would share the same anon_vma, which we already lock
here. However this turned out to be difficult - all of the schemes I
tried for refcounting the growable anon_vma and clearing turned out ugly.
So, I'm now proposing only the minimal fix.
The overhead of taking the page table lock during stack expansion is
expected to be small: glibc doesn't use expandable stacks for the threads
it creates, so having multiple growable stacks is actually uncommon and we
don't expect the page table lock to get bounced between threads.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During reviewing the source code, I found a comment which mention that
after f_op->mmap(), vma's start address can be changed. I didn't verify
that it is really possible, because there are so many f_op->mmap()
implementation. But if there are some mmap() which change vma's start
address, it is possible error situation, because we already prepare prev
vma, rb_link and rb_parent and these are related to original address.
So add WARN_ON_ONCE for finding that this situtation really happens.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Gortmaker