The function drm_crtc_arm_vblank_event should be used for the driver
which have vblank interrupt support. In case of vmwgfx we do not have
vblank interrupt.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
When display surface is different than the framebuffer surface, atomic
path do not copy the surface data. This commit moved the code to copy
surface from legacy to atomic path.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
In case of page flip there is no need to iterate over all display unit
in the function "vmw_kms_helper_dirty". If crtc is available then
dirty commands is performed on that crtc only.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
The memmap options sent to the udl framebuffer driver were not being
checked for all sets of possible crazy values. Fix this up by properly
bounding the allowed values.
Reported-by: Eyal Itkin <eyalit@checkpoint.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321154553.GA18454@kroah.com
A few more fixes for 4.16. Mostly for displays:
- A fix for DP handling on radeon
- Fix banding on eDP panels
- Fix HBR audio
- Fix for disabling VGA mode on Raven that leads to a corrupt or
blank display on some platforms
* 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/display: Add one to EDID's audio channel count when passing to DC
drm/amd/display: We shouldn't set format_default on plane as atomic driver
drm/amd/display: Fix FMT truncation programming
drm/amd/display: Allow truncation to 10 bits
drm/amd/display: fix dereferencing possible ERR_PTR()
drm/amd/display: Refine disable VGA
drm/amdgpu: Use atomic function to disable crtcs with dc enabled
drm/radeon: Don't turn off DP sink when disconnected
Problem:
When unloading due to failure amdgpu_device_fini was called twice
which was leading to NULL ptr in amdgpu_irq_disable_all.
Fix:
Call amdgpu_device_fini only once from amdgpu_driver_unload_kms.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mixed up exporter and importer here. E.g. while mapping the BO we need
to check the importer not the exporter.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105633
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: add Vega12 support
1. delete useless argument in function register_thermal_interrupt
2. rename function name register_thermal_interrupt to register_irq_handlers
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: add Vega12 support
1. remove struct cgs_os_ops
2. delete cgs_linux.h
3. refine the irq code for vega10, can fix set pp table
failed issue.
4. add common smu irq process function
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add change to return per DPM level clock in DAL interface
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove W/A carried over from VG10 to set VDDSOC Floor Voltage
prior to enabling DPM since the VBIOS covers the floor voltage
setting now
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under some heavy computing environment(e.g. dgemm test), it
takes the asic over 10+ seconds to finish the dispatched job
which will trigger the timeout.
It's quite confusing although it does not seem to bring any
real problems. As a quick workround, we choose to not enfoce
the timeout setting on compute queues.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
handles the driver interaction with the smu firmware
v2: squash in:
- s3 fix for firmware loading
- smu loading through the psp
- unecessary calls to is_smc_ram_running()
- smu table cleanups
v3: rebase
v4: rebase, smu bo allocation fixes, add dpm running callback
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New psm infrastructure for vega12.
v2: rebase (Alex)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new get_smc_dpm_information api to fetch the smu dpm
info from the vbios.
v2: deal with updated table format.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Defines the power table format in the vbios.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Defines the smc message interface with the driver.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add driver firmware interface header.
v2: squash in interface updates.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new smu_info table.
v2: update table format.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used for the powerplay implementation.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the IP offsets for vega12.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add external_rev_id for vega12.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the appropriate clockgating flags for vega12
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the IP blocks, clock and powergating flags, and
common clockgating support.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Add gfx9_2_1 golden setting.
v2: switch to soc15_program_register_sequence for
golden setting programming
v3: squash in additional golden updates
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Ken Wang <ken.wang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as vega10 and raven.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Same as vega10 and raven.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Just a place holder for now.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Fill these in when we get them.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Declare and fetch the appriopriate files.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Update vega12 sdma golden setting.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Ken Wang <ken.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sdma golden setting for vega12.
v2: switch to soc15_program_register_sequence for
golden register programming
v3: squash in unused declaration fix
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as vega10 for now.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Fill these in when we get them.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Declare the firmware and fetch the proper file.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Treat it the same as vega10 for now.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Same as vega10.
v2: squash in golden regs fix from Feifei
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
DC is used for modesetting on vega12.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
VG12 shows minor revision version of 2 which is not handled in
bios_parser_get_firmware_info() routine.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for vega12 to the display manager.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Add virtual dce support for vega12.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Declare firmware and add support for the file.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Declare firmware and add support for the file.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Same as vega10.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as vega10 for now.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Add the cgs interface to query the smu firmware for vega12
and declare the firmware.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
soc15 just like vega10 and raven.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Add vega12 to amd_asic_type enum and amdgpu_asic_name[].
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Add ip header files for IPs with a delta for vg12:
GC, MMHUB, OSS
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-By: Ken Wang <ken.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the GPU is stuck waiting for an event or for a semaphore, we need to
reset the GPU in order to recover. We have to tell the reset routine
which engines we want reset, but we were still using the old interface
and declaring it as "not-fatal".
Fixes: 14b730fcb8 ("drm/i915/tdr: Prepare error handler to accept mask of hung engines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320100449.1360-1-chris@chris-wilson.co.uk
(cherry picked from commit ca98317b89)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Detailed description for this pull request:
1. Add exported extcon function in order to support OF graph binding
- The extcon consumer driver used the "extcon = <&extcon's phandle"
property in device-tree in order to bind between extcon provider
and consumer driver. But, OF graph method is better than 'extcon' property.
So, extcon subsystem adds the following function to support OF graph binding.
: extcon_find_edev_by_node(struct device_node *node)
- Create the immutable branch ("ib-extcon-drm-dt-v4.17") for both drm-misc
and device-tree subsystem. This immutable branch contains the use-case of
OF graph binding for EXTCON_HDMI connector between MHL device driver
and extcon provider driver.
2. Fix minor issues of extcon device drivers
- Remove platform_data and covert to fully use GPIO descriptor for extcon-gpio.c
- Remove workaround code for id pin direction from extcon-inte-int3496.c
because GPIO ACPI library does support it with generic way.
- Set direction and drv flags for V5 boost GPIO because of fixing
the firmware bug.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gEVD
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon for 4.17
Detailed description for this pull request:
1. Add exported extcon function in order to support OF graph binding
- The extcon consumer driver used the "extcon = <&extcon's phandle"
property in device-tree in order to bind between extcon provider
and consumer driver. But, OF graph method is better than 'extcon' property.
So, extcon subsystem adds the following function to support OF graph binding.
: extcon_find_edev_by_node(struct device_node *node)
- Create the immutable branch ("ib-extcon-drm-dt-v4.17") for both drm-misc
and device-tree subsystem. This immutable branch contains the use-case of
OF graph binding for EXTCON_HDMI connector between MHL device driver
and extcon provider driver.
2. Fix minor issues of extcon device drivers
- Remove platform_data and covert to fully use GPIO descriptor for extcon-gpio.c
- Remove workaround code for id pin direction from extcon-inte-int3496.c
because GPIO ACPI library does support it with generic way.
- Set direction and drv flags for V5 boost GPIO because of fixing
the firmware bug.
When validating legacy surfaces, the backup bo might be destroyed at
surface validate time. However, the kms resource validation code may have
the bo reserved, so we will destroy a locked mutex. While there shouldn't
be any other users of that mutex when it is destroyed, it causes a lock
leak and thus throws a lockdep error.
Fix this by having the kms resource validation code hold a reference to
the bo while we have it reserved. We do this by introducing a validation
context which might come in handy when the kms code is extended to validate
multiple resources or buffers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
When we are running without fbdev, transitioning from the login screen to
X or gnome-shell/wayland will cause a vt switch and the driver will disable
svga mode, losing all modesetting resources. However, the kms atomic state
does not reflect that and may think that a crtc is still turned on, which
will cause device errors when we try to bind an fb to the crtc, and the
screen will remain black.
Fix this by turning off all kms resources before disabling svga mode.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Replace drm_gem_object_reference/unreference function with *_get/put()
suffixes, because it is shorter and consistent with the kernel
kref_get/put() functions. The following Coccinelle script was used:
@@
expression e;
@@
(
-drm_gem_object_reference(e);
+drm_gem_object_get(e);
|
-drm_gem_object_unreference(e);
+drm_gem_object_put(e);
|
-drm_gem_object_unreference_unlocked(e);
+drm_gem_object_put_unlocked(e);
)
Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1521570567-22519-1-git-send-email-santhameena13@gmail.com
DC takes channel count to mean the actual count. cea_sad's channels
represent it as number of channels - 1.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This is still a leftover from early atomic brinup days.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Switch the order of parameters being set for depth
and mode of truncation, as it previously was not correct
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The truncation isn't being programmed if the truncation
depth is set to 2, it causes an issue with dce11.2 asic
using 6bit eDP panel. It required to truncate 12:10 in order to
perform spatial dither 10:6.
This change will allow 12:10 truncation to be enabled.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when set pp table
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
caused by
'commit ca82cec868d1 ("drm/amd/pp: Simplified the avfs btc state on smu7")'
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
caused by
'commit 83e3c4615872 ("drm/amdgpu: Remove wrapper layer of smu ip functions")'
BUG: unable to handle kernel NULL pointer dereference at 00000000000005d8
[ 313.241459] IP: ci_dpm_read_sensor+0x37/0xf0 [amdgpu]
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By moving amdgpu_irq_disable_all earlier in the sequence
fixes an issue with disabling pflip interrupts:
*ERROR* dal_irq_service_dummy_ack: called for non-implemented irq source
Earlier patch fixed a memory corruption and revealed irq
warnings.This way it seems to be there no obvious issues
with unloading the module.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable irq on devices before destroying them. That prevents
use-after-free memory access when unloading the driver.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change fixes the deadlock when unloading the driver with displays
connected.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The offset inside the page wasn't included in the copy call meaning
the start of the page was being read/written instead.
Reported-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PCIE_INDEX2/DATA2 pair will be used for smn register accessing since from vega.
PCIE_INDEX/DATA pair should be reserved for smu
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to be able to query the VCN firmware version from
userspace to determine supported features, etc.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Fix sparse warnings from omapdrm
* HPD support for DVI connector
* Big cleanup to remove static variables
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YdNo
-----END PGP SIGNATURE-----
Merge tag 'omapdrm-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm patches for v4.17
* Fix sparse warnings from omapdrm
* HPD support for DVI connector
* Big cleanup to remove static variables
* tag 'omapdrm-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (69 commits)
drm/omap: fix compile error when DPI is disabled
drm/omap: fix compile error when debugfs is disabled
drm: omapdrm: displays: panel-dsi-cm: Fix field access before set
drm/omap: cleanup color space conversion
drm/omap: Allow HDMI audio setup even if we do not have video configured
drm/omap: fix maximum sizes
drm/omap: add writeback funcs to dispc_ops
drm/omap: fix scaling limits for WB
drm/omap: fix WB height with interlace
drm/omap: fix WBDELAYCOUNT with interlace
drm/omap: fix WBDELAYCOUNT for HDMI
drm/omap: set WB channel-in in wb_setup()
drm/omap: Add pclk setting case when channel is DSS_WB
drm/omap: dispc: disp_wb_setup to check return code
drm/omap: remove leftover enums
dt-bindings: display: add HPD gpio to DVI connector
drm/omap: add HPD support to connector-dvi
drm/omap: Init fbdev emulation only when we have displays
drm/omap: cleanup fbdev init/free
drm/omap: fix omap_fbdev_free() when omap_fbdev_create() wasn't called
...
Updates for 4.17. Sorry, running a bit late on this, didn't have a
chance to send pull-req before heading to linaro. But it has all been
in linux-next for a while. Main updates:
+ DSI updates from 10nm / SDM845
+ fix for race condition with a3xx/a4xx fence completion irq
+ some refactoring/prep work for eventual a6xx support (ie. when we have
a userspace)
+ a5xx debugfs enhancements
+ some mdp5 fixes/cleanups to prepare for eventually merging writeback
support (ie. when we have a userspace)
* tag 'drm-msm-next-2018-03-20' of git://people.freedesktop.org/~robclark/linux: (36 commits)
drm/msm: fix building without debugfs
drm/msm/mdp5: don't pre-reserve LM's if no dual-dsi
drm/msm/mdp5: add missing LM flush bits
drm/msm/mdp5: print a bit more of the atomic state
drm/msm/mdp5: rework CTL START signal handling
drm/msm: Trigger fence completion from GPU
drm/msm/dsi: fix direct caller of msm_gem_free_object()
drm/msm: strip out msm_fence_cb
drm/msm: rename mdp->disp
drm/msm/dsi: Fix potential NULL pointer dereference in msm_dsi_modeset_init
drm/msm/adreno/a5xx_debugfs: fix potential NULL pointer dereference
drm/msm/dsi: Get byte_intf_clk only for versions that need it
drm/msm/adreno: Use generic function to load firmware to a buffer object
drm/msm/adreno: Define a list of firmware files to load per target
drm/msm/adreno: Rename gpmufw to powerfw
drm/msm: Pass the correct aperture end to drm_mm_init
drm/msm/gpu: Set number of clocks to 0 if the list allocation fails
drm/msm: Replace gem_object deprecated functions
drm/msm/hdmi: fix semicolon.cocci warnings
drm/msm/mdp5: Fix trailing semicolon
...
This fixes mmap() for fbdev devices by providing a custom implementation
based on the KMS variant. This is a fairly exotic case these days, hence
why it is not flagged for stable.
There is also support for dedicating one of the overlay planes to serve
as a hardware cursor on older Tegra that did support hardware cursors
but not RGBA formats for it.
Planes will now also export the IN_FORMATS property by supporting the
various block-linear tiling modifiers for RGBA pixel formats.
Other than that, there's a bit of cleanup of DMA API abuse, use of the
private object infrastructure for global state (rather than subclassing
atomic state objects) and an implementation of ->{begin,end}_cpu_access
callbacks for PRIME exported buffers, which allow users to perform cache
maintenance on these buffers.
-----BEGIN PGP SIGNATURE-----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=gOLI
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.17-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.17-rc1
This fixes mmap() for fbdev devices by providing a custom implementation
based on the KMS variant. This is a fairly exotic case these days, hence
why it is not flagged for stable.
There is also support for dedicating one of the overlay planes to serve
as a hardware cursor on older Tegra that did support hardware cursors
but not RGBA formats for it.
Planes will now also export the IN_FORMATS property by supporting the
various block-linear tiling modifiers for RGBA pixel formats.
Other than that, there's a bit of cleanup of DMA API abuse, use of the
private object infrastructure for global state (rather than subclassing
atomic state objects) and an implementation of ->{begin,end}_cpu_access
callbacks for PRIME exported buffers, which allow users to perform cache
maintenance on these buffers.
* tag 'drm/tegra/for-4.17-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: prime: Implement ->{begin,end}_cpu_access()
drm/tegra: gem: Map pages via the DMA API
drm/tegra: hub: Use private object for global state
drm/tegra: fb: Properly support linear modifier
drm/tegra: plane: Support format modifiers
drm/tegra: dc: Dedicate overlay plane to cursor on older Tegra's
drm/tegra: plane: Make tegra_plane_get_overlap_index() static
drm/tegra: fb: Implement ->fb_mmap() callback
drm/tegra: gem: Make __tegra_gem_mmap() available more widely
drm/tegra: gem: Reshuffle declarations
I have accumulated some patches as we went through some internal testing
for mali-dp and I was waiting for the YUV2RGB patches to land in your
tree.
* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
drm: mali-dp: Add YUV->RGB conversion support for video layers
drm: mali-dp: Turn off CRTC vblank when removing module.
drm: arm: malidp: Use drm_atomic_helper_shutdown() to disable planes on removal
drm: arm: malidp: Don't destroy planes manually in error handlers
drm/mali-dp: Fix malidp_atomic_commit_hw_done() for event sending.
drm/arm/malidp: Disable pixel alpha blending for colors that do not have alpha
drm: mali-dp: Fix bug on scaling with rotation
drm/mali-dp: Don't enable scaling engine for planes that only rotate.
drm: mali-dp: Uninitialized variable in malidp_se_check_scaling()
drm/mali-dp: Align pitch size to be multiple of bus burst read size.
drm/mali-dp: Rotated planes need a larger pitch size.
This contains two small fixes for the alpha blending support that was
merged into v4.16-rc1 and a fix for connector reference leaks caused by
the fact that display pipelines are no longer automatically disabled if
the framebuffer is removed.
Furthermore this contains a fix for a crash on IOMMU detach at driver
unbind time and a regulator enable/disable unbalance fix.
-----BEGIN PGP SIGNATURE-----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=iuUO
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.16-rc7-fixes' of git://anongit.freedesktop.org/tegra/linux into drm-fixes
drm/tegra: Fixes for v4.16-rc7
This contains two small fixes for the alpha blending support that was
merged into v4.16-rc1 and a fix for connector reference leaks caused by
the fact that display pipelines are no longer automatically disabled if
the framebuffer is removed.
Furthermore this contains a fix for a crash on IOMMU detach at driver
unbind time and a regulator enable/disable unbalance fix.
* tag 'drm/tegra/for-4.16-rc7-fixes' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: Shutdown on driver unbind
drm/tegra: dsi: Don't disable regulator on ->exit()
drm/tegra: dc: Detach IOMMU group from domain only once
drm/tegra: plane: Correct legacy blending
drm/tegra: plane: Fix RGB565 format on older Tegra
platform_get_resource_byname() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference
a bit later in the code.
This is detected by Coccinelle semantic patch.
@@
expression pdev, res, n, t, e, e1, e2;
@@
res = platform_get_resource_byname(pdev, t, n);
+ if (!res)
+ return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1521555630-29284-1-git-send-email-weiyongjun1@huawei.com
The old wait_on_atomic_t() is going to get removed, use the more
flexible wait_var_event() API instead.
Unlike wake_up_atomic_t(), wake_up_var() will issue the wakeup
even if the variable is not 0.
No change in functionality.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If bios sets up an MST output and hardware state readout code sees this is
an SST configuration, when disabling the encoder we end up calling
->post_disable_dp() hook instead of the MST version. Consequently, we write
to the DP_SET_POWER dpcd to set it D3 state. Further along when we try
enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up
the MST hub. This results in continuous link training failures which keep
the system busy delaying boot. We could identify bios MST boot discrepancy
and handle it accordingly but a simple way to solve this is to write to the
DP_SET_POWER dpcd for MST too.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Laura Abbott <labbott@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 5ea2355a10 ("drm/i915/mst: Use MST sideband message transactions for dpms control")
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinakaran.pandiyan@intel.com
(cherry picked from commit ad260ab32a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that we have the guarantee that we will have only a single YUV plane,
actually support them. The way it works is not really straightforward,
since we first need to enable the YUV mode in the plane that we want to
setup, and then we have a few registers to setup the YUV buffer and
parameters.
We also need to setup the color correction to actually have something
displayed.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/66088c1398bd3189123f28a89a7ccc669fe9f296.1519931807.git-series.maxime.ripard@bootlin.com
Removes unneeded void * casts for the following pointers:
hwmgr->backend
hwmgr->smu_backend
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use asic's callback function get_xclk in amdgpu
v2: squash in removal of leftover debug info
(drm/amd/pp: Delete debug info in smu7_hwmgr.c) (Rex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use smc_table_manager function to copy/save tables to/from smu.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes static checker warning caused by
"36cc549d5986: "drm/amd/display: disable CRTCs with
NULL FB on their primary plane (V2)"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bad case won't follow normal sense, it will not enable vga1 as usual, but vga2,3,4 is on.
Signed-off-by: Clark Zheng <clark.zheng@amd.com>
Reviewed-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The Allwinner A80 SoC has 2 documented TCONs. The display pipeline
diagram from the user manual shows a third TCON, but it's missing
an interrupt line, and its registers are not explained either.
It's also not used in Allwinner's vendor BSP.
The first TCON only has channel 0, for LCD panel output. The TCON
hardware setup is peculiar in that the eDP reset must also be
deasserted to allow access to the TCON. How the eDP module is wired
in the SoC itself is never explained.
The second TCON only has channel 1, and its output is connected to
the HDMI encoder block.
This patch adds a "needs_edp_reset" field to the tcon quirks structure,
and adds quirks and compatible strings for the 2 documented TCONs.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180315114136.24747-4-wens@csie.org
These macros are similar to the DRM_<LEVEL> with the addition
of a struct device * to the arguments.
Convert the single drm_dev_printk function into 2 separate functions.
drm_dev_printk with a KERN_<LEVEL> * for generic use and drm_dev_dbg
for conditional masked use.
Remove the __func__ argument and use __builtin_return_address(0) to be
similar to the DRM_<LEVEL> macros uses.
Convert the DRM_DEV_<LEVEL> macros to remove now unnecessary arguments
and use a consistent style.
These macros are rarely used in the generic gpu/drm code so the code
size does not change much for a defconfig, but when more drivers are
enabled, there is ~4k savings.
Many of these macros have no existing use at all.
$ size -t drivers/gpu/drm/built-in.a | tail -1
1877530 44651 995 1923176 1d5868 (TOTALS)
$ size -t drivers/gpu/drm/built-in.a | tail -1
1877527 44651 995 1923173 1d5865 (TOTALS)
$ size -t drivers/gpu/drm/built-in.a | tail -1
17166750 2689238 108352 19964340 130a1b4 (TOTALS)
$ size -t drivers/gpu/drm/built-in.a | tail -1
17168888 2691734 108352 19968974 130b3ce (TOTALS)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/e5c164946e15375ac71b69b75f296efdf0b76e6d.1521233717.git.joe@perches.com
The adreno driver stopped building when CONFIG_DEBUGFS is disabled:
drivers/gpu/drm/msm/adreno/adreno_device.c: In function 'adreno_load_gpu':
drivers/gpu/drm/msm/adreno/adreno_device.c:153:16: error: 'const struct msm_gpu_funcs' has no member named 'debugfs_init'
if (gpu->funcs->debugfs_init) {
^~
drivers/gpu/drm/msm/adreno/adreno_device.c:154:13: error: 'const struct msm_gpu_funcs' has no member named 'debugfs_init'
gpu->funcs->debugfs_init(gpu, dev->primary);
^~
This adds an #ifdef around the code that references the hidden
pointer.
Fixes: 331dc0bc19 ("drm/msm: add a5xx specific debugfs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
If there is only a single DSI interface, don't reserve the first two
layer-mixers for the dual-DSI use-case.
This was causing problems for WB, not being able to assign a LM, on
8x16, which has only two LM's and a single DSI.
Signed-off-by: Rob Clark <robdclark@gmail.com>
For DSI cmd-mode and writeback, we need to write the CTL's START
register to kick things off, but we only want to do that once both
the encoder and the crtc have a chance to write their corresponding
flush bits. The difficulty is that when there is a full modeset
(ie. encoder state has changed) we want to defer the start until
encoder->enable(). But if only plane's have changed, we want to do
this from crtc->commit().
The start_mask was a previous attempt to handle this, but it didn't
really do the right thing since atomic conversion.
Instead track in the crtc state that the start should be deferred,
set to try from encoder's (or in future writeback's) atomic_check().
This way the state is part of the atomic state, and rollback can
work properly if an atomic test fails.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Interrupt commands causes the CP to trigger an interrupt as the command
is processed, regardless of the GPU being done processing previous
commands. This is seen by the interrupt being delivered before the
fence is written on 8974 and is likely the cause of the additional
CP_WAIT_FOR_IDLE workaround found for a306, which would cause the CP to
wait for the GPU to go idle before triggering the interrupt.
Instead we can set the (undocumented) BIT(31) of the CACHE_FLUSH_TS
which will cause a special CACHE_FLUSH_TS interrupt to be triggered from
the GPU as the write event is processed.
Add CACHE_FLUSH_TS to the IRQ masks of A3xx and A4xx and remove the
workaround for A306.
Suggested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This should be using drm_gem_object_put(). Also since this is done only
in driver unload path, we don't need to synchronize setting tx_gem_obj
to NULL, so juse use the _unlocked() variant.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Since new display controller is called "dpu" instead of "mdp". Lets
make the name of the toplevel directory for the display controllers a
bit more generic.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
_dev_ is being dereferenced before it is null checked, hence there
is a potential null pointer dereference.
Fix this by moving the pointer dereference after _dev_ has been
null checked.
Fixes: d4e7f38d70ef ("drm/msm/dsi: check msm_dsi and dsi pointers before use")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
_minor_ is being dereferenced before it is null checked, hence there
is a potential null pointer dereference. Fix this by moving the pointer
dereference after _minor_ has been null checked.
Fixes: 024ad8df763f ("drm/msm: add a5xx specific debugfs")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Our shadow context content is from guest but with masked control reg like
CTX_CONTEXT_CONTROL, we need to make sure all settings from guest would be set
when this context is on hw, this trys to force mask enable bits for all to
ensure every bits setting would be effective on hw.
One regression found related to once inhibit bit is set, gpu engine are working
on inhibit state until MI_LOAD_REG_IMM command or context image clear inhibit
bit with mask bit set to 1, and val bit set to 0. In gvt-g currently workload
has the highest priority, so gvt-g workload could trigger preempt context
easily, preempt context set inhibit bit, then gvt-g workload is scheduled in,
but gvt-g workload shadow context image usually doesn't set inhibit mask bit,
so gpu is still in inhibit state when gvt workload is running. This caused gpu
hang.
Suggested-by: Zhang, Xiong <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Zhang, Xiong <xiong.y.zhang@intel.com>
Since commit 846c7dfc11 ("drm/atomic: Try to preserve the crtc enabled
state in drm_atomic_remove_fb, v2."), removing the last framebuffer will
no longer disable the corresponding pipeline, which causes the KMS core
to complain about leaked connectors on driver unbind.
Fix this by calling drm_atomic_helper_shutdown() on driver unbind, which
will cause all display pipelines to be shut down and therefore drop the
extra references on the connectors.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The regulator is controlled as part of runtime PM, so it should not be
additionally disabled from the ->exit() callback.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Detaching from an IOMMU group multiple times can lead to a crash. This
could potentially be fixed in the IOMMU driver, but it's easy to avoid
the subsequent detach operations in this driver, so do that as well.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The PDPs of a shadow page will only be valid after a vGPU mm is pinned.
So the PDPs in the shadow context should be updated then.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
As different OSes might handling GVT PPGTT creation/destroy notification
differently during a vGPU reset. A better approach is invalidating all
vGPU PPGTT mm objects during vGPU reset.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Trivial fix to spelling mistake in gvt_err error message text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reduntant message prints when:
- linux guest creating.
- dma-buf win10 guest boot.
- xonotic stress testing in linux guest.
Add below registers to default MMIO handler:
0xd00, RPM_CONFIG0
0xd40, RC6_LOCATION
0x65010, HSW_AUD_MISC_CTRL
0x6671c,
0x700a0, CUR_FBC_CTL
0x7239c,
v2:
- Should init i915_reg_t using uint32_t instead of _MMIO macro.
(compiling errors)
- Use defined offset in i915_reg.h
(zhenyu)
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
These callbacks allow the exporter to swap in and pin the backing
storage for buffers as well as invalidate the cache in preparation for
accessing the buffer from the CPU, and flush the cache and unpin the
backing storage when the CPU is done modifying the buffer.
Signed-off-by: Thierry Reding <treding@nvidia.com>
When allocating pages, map them with the DMA API in order to invalidate
caches. This is the correct usage of the API and works just as well as
faking up the SG table and using the dma_sync_sg_for_device() function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rather than subclass the global atomic state to store the hub display
clock and rate, create a private object and store this data in its
state.
Signed-off-by: Thierry Reding <treding@nvidia.com>
In preparation to enabling -Wvla, remove VLA. In this particular
case use macro ARRAY_SIZE so the length of array _bo_ can be
computed at preprocessing time.
The use of stack Variable Length Arrays needs to be avoided, as they
can be a vector for stack exhaustion, which can be both a runtime bug
or a security flaw. Also, in general, as code evolves it is easy to
lose track of how big a VLA can get. Thus, we can end up having runtime
failures that are hard to debug.
Also, fixed as part of the directive to remove all VLAs from
the kernel: https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180313143151.GA27486@embeddedgus
Even though we default PRE_VEGA support to 'n' upstream in amd-staging
we want to keep it enabled by default.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Refine commit f49e9bac19 ("drm/amd/pp: Get and save Rv smu version")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes static checker warning caused by
"36cc549d5986: "drm/amd/display: disable CRTCs with
NULL FB on their primary plane (V2)"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bad case won't follow normal sense, it will not enable vga1 as usual, but vga2,3,4 is on.
Signed-off-by: Clark Zheng <clark.zheng@amd.com>
Reviewed-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do the refresh rate calculation with a single division. This gives
us slightly more accurate results, especially for interlaced since
we don't just double the final truncated result.
We do lose one bit compared to the old way, so with an interlaced
mode the new code can only handle ~2GHz instead of the ~4GHz the
old code handeled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180313150759.27620-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
While we want to potentially support multiple different gamma/degamma
LUT sizes we can (and should) at least check that the blob length
is a multiple of the LUT entry size.
v2: s/expected_size_mod/expected_elem_size/ (Daniel)
Add kernel doc (Daniel)
v3: s/we/were/ typo in the docs
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180315152241.7113-1-ville.syrjala@linux.intel.com
Using a flexible array for the blob data was a mistake by me. It
forces all users of the blob data to cast blob->data to something
else. void* is clearly superior so let's go back to the original
scheme.
Not a clean revert as the code has moved.
This reverts commit d63f5e6bf6.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223192506.29992-1-ville.syrjala@linux.intel.com
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Arnd Bergman reports:
"""
The conditional spinlock confuses gcc into thinking the 'flags' value
might contain uninitialized data:
drivers/gpu/drm/i915/i915_pmu.c: In function '__i915_pmu_event_read':
arch/x86/include/asm/paravirt_types.h:573:3: error: 'flags' may be used uninitialized in this function [-Werror=maybe-uninitialized]
The code is correct, but it's easy to see how the compiler gets confused
here. This avoids the problem by pulling the lock outside of the function
into its only caller.
"""
On deeper look it seems this is caused by paravirt spinlocks
implementation when CONFIG_PARAVIRT_DEBUG is set, which by being
complicated, manages to convince gcc locked parameter can be changed
externally (impossible).
Work around it by removing the conditional locking parameters altogether.
(It was never the most elegant code anyway.)
Slight penalty we now pay is an additional irqsave spin lock/unlock cycle
on the event enable path. But since enable is not a fast path, that is
preferrable to the alternative solution which was doing MMIO under irqsave
spinlock.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 1fe699e301 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180314080535.17490-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit ad055fb8e0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
tasklet_kill() will spin waiting for the current tasklet to be executed.
However, if tasklet_disable() has been called, then the tasklet is never
executed but permanently put back onto the runlist until
tasklet_enable() is called. Ergo, we cannot use tasklet_kill() inside a
disable/enable pair. This is the case when we call set-wedge from inside
i915_reset(), and another request was submitted to us concurrent to the
reset.
Fixes: 963ddd63c3 ("drm/i915: Suspend submission tasklets around wedging")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180307134226.25492-6-chris@chris-wilson.co.uk
(cherry picked from commit 68ad361285)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Similar to the staging around handling of engine->submit_request, we
need to stop adding to the execlists->queue prior to calling
engine->cancel_requests. cancel_requests will move requests from the
queue onto the timeline, so if we add a request onto the queue after that
point, it will be lost.
Fixes: af7a8ffad9 ("drm/i915: Use rcu instead of stop_machine in set_wedged")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180307134226.25492-5-chris@chris-wilson.co.uk
(cherry picked from commit 47650db02d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We don't want to preserve the DDI A 4 lane bit on ICL.
Fixes: 3d2011cfa4 ("drm/i915/icl: remove port A/E lane sharing limitation.")
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180306104155.3526-1-jani.nikula@intel.com
(cherry picked from commit 1e6aa7e55c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
There are 2 Type-c PHYs in RK3399, but only one DP controller. Hence
only one PHY can connect to DP controller at one time, the other should
be disconnected. The GRF_SOC_CON26 register has a switch bit to do it,
set this bit means enable PHY 1, clear this bit means enable PHY 0.
If the board has 2 Type-C ports, the DP driver get the phy id from
devm_of_phy_get_by_index, and then control this switch according to
this id. But some others board only has one Type-C port, it may be PHY 0
or PHY 1. The dts node id can not tell us the correct PHY id. Hence move
this switch to PHY driver, the PHY driver can distinguish between PHY 0
and PHY 1, and then write the correct register bit.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
[The phy-changes are in the phy-tree now and the cdn-dp wasn't
enabled at all so far, so this change can go through drm-misc
alone without causing issues when testing drm-misc]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180216120956.19034-6-enric.balletbo@collabora.com
drm_printk is used for both DRM_ERROR and DRM_DEBUG with unnecessary
arguments that can be removed by creating separate functins.
Create specific functions for these calls to reduce x86/64 defconfig
size by ~20k.
Modify the existing macros to use the specific calls.
new:
$ size -t drivers/gpu/drm/built-in.a | tail -1
1876562 44542 995 1922099 1d5433 (TOTALS)
old:
$ size -t drivers/gpu/drm/built-in.a | tail -1
1897565 44542 995 1943102 1da63e (TOTALS)
Miscellanea:
o intel_display requires a change to use the specific calls.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/016b5cb84cede20fd0f91ed6965421d99fd5f2ce.1520978414.git.joe@perches.com
- Two warnings fix for runtime pm and usr copy (Xiong, Zhenyu)
- OA context fix for vGPU profiling (Min)
- privilege batch buffer reloc fix (Fred)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaqwRYAAoJEPpiX2QO6xPKZT0H/30rwEPNL0Z9LMrZY/WC4Yr8
0Hbc7jn0pYgCV+Cm8E1OPwQv2lqZMx5VAPV7ggQqaVjQam629NVODVUVNyMorQ7l
uy3kbi3vAcazuvaApUchMDppfl919FP5QXFKaEm8HU3C8oROaKO6lZKc6OJFd1Bu
eNLwg3FqI0JXRUqfggzyaqtpV8bMXzLVeQh98wlGbpkEF0yvXlTPProLJx4WX2kq
/8OULi2k7g9QxOd8S9l3TdSHpOJKPzoDecvGW6WFM+0q5POs+Ybk69yU32irt/Fk
2dNbqn8GgPXTkFMaBzlBFqq6Kgh4y1b6eQDjQC1oZGOyjK/HwtNteZHREEzg15A=
=fg6j
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2018-03-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Only GVT fixes:
- Two warnings fix for runtime pm and usr copy (Xiong, Zhenyu)
- OA context fix for vGPU profiling (Min)
- privilege batch buffer reloc fix (Fred)
* tag 'drm-intel-fixes-2018-03-15' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/gvt: fix user copy warning by whitelist workload rb_tail field
drm/i915/gvt: Correct the privilege shadow batch buffer address
drm/i915/gvt: keep oa config in shadow ctx
drm/i915/gvt: Add runtime_pm_get/put into gvt_switch_mmio
Unbinding nouveau on a dual GPU MacBook Pro oopses because we iterate
over the bl_connectors list in nouveau_backlight_exit() but skipped
initializing it in nouveau_backlight_init(). Stacktrace for posterity:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: nouveau_backlight_exit+0x2b/0x70 [nouveau]
nouveau_display_destroy+0x29/0x80 [nouveau]
nouveau_drm_unload+0x65/0xe0 [nouveau]
drm_dev_unregister+0x3c/0xe0 [drm]
drm_put_dev+0x2e/0x60 [drm]
nouveau_drm_device_remove+0x47/0x70 [nouveau]
pci_device_remove+0x36/0xb0
device_release_driver_internal+0x157/0x220
driver_detach+0x39/0x70
bus_remove_driver+0x51/0xd0
pci_unregister_driver+0x2a/0xa0
nouveau_drm_exit+0x15/0xfb0 [nouveau]
SyS_delete_module+0x18c/0x290
system_call_fast_compare_end+0xc/0x6f
Fixes: b53ac1ee12 ("drm/nouveau/bl: Do not register interface if Apple GMUX detected")
Cc: stable@vger.kernel.org # v4.10+
Cc: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Commit 7110c89bb8852ff8b0f88ce05b332b3fe22bd11e ("mmu: swap out round
for ALIGN") replaced two calls to round/rounddown with ALIGN/ALIGN_DOWN,
but erroneously applied ALIGN_DOWN to a different variable (addr) and left
intended variable (tail) not rounded/ALIGNed.
As a result screen corruption, X lockups are observable. An example of kernel
log of affected system with NV98 card where it was bisected:
nouveau 0000:01:00.0: gr: TRAP_M2MF 00000002 [IN]
nouveau 0000:01:00.0: gr: TRAP_M2MF 00320951 400007c0 00000000 04000000
nouveau 0000:01:00.0: gr: 00200000 [] ch 1 [000fbbe000 DRM] subc 4 class 5039
mthd 0100 data 00000000
nouveau 0000:01:00.0: fb: trapped read at 0040000000 on channel 1
[0fbbe000 DRM]
engine 00 [PGRAPH] client 03 [DISPATCH] subclient 04 [M2M_IN] reason 00000006
[NULL_DMAOBJ]
Fixes bug 105173 ("[MCP79][Regression] Unhandled NULL pointer dereference in
nvkm_object_unmap since kernel 4.15")
https://bugs.freedesktop.org/show_bug.cgi?id=105173
Fixes: 7110c89bb885 ("mmu: swap out round for ALIGN ")
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Maris Nartiss <maris.nartiss@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org # v4.15+