vfp_pm_suspend runs on each cpu, only clear the hardware state
pointer for the current cpu. Prevents a possible crash if one
cpu clears the hw state pointer when another cpu has already
checked if it is valid.
Cc: stable@vger.kernel.org
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 722b3c7469 modified x86 ftrace to
avoid tracing all functions called from irqs when function graph was
used with a filter. Port the same fix to ARM.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The open-coded mutex implementation for ARMv6+ cores suffers from a
severe lack of barriers, so in the uncontended case we don't actually
protect any accesses performed during the critical section.
Furthermore, the code is largely a duplication of the ARMv6+ atomic_dec
code but optimised to remove a branch instruction, as the mutex fastpath
was previously inlined. Now that this is executed out-of-line, we can
reuse the atomic access code for the locking (in fact, we use the xchg
code as this produces shorter critical sections).
This patch uses the generic xchg based implementation for mutexes on
ARMv6+, which introduces barriers to the lock/unlock operations and also
has the benefit of removing a fair amount of inline assembly code.
Cc: <stable@vger.kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Reported-by: Shan Kang <kangshan0910@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The CPU will endlessly spin at the end of machine_halt and
machine_restart calls. However, this will lead to a soft lockup
warning after about 20 seconds, if CONFIG_LOCKUP_DETECTOR is enabled,
as system timer is still alive.
Disable interrupt before going to spin endlessly, so that the lockup
warning will never be seen.
Cc: <stable@vger.kernel.org>
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The IDT codecs initializes the GPIO setup for mute LEDs via
snd_hda_sync_vmaster_hook(). This works in most cases except for the
very first call, which is called before PCM and control creations.
Thus before Master switch is set manually via alsactl, the mute LED
may show the wrong state, depending on the polarity.
Now it's fixed by calling the LED-status update function manually when
no vmaster is set yet.
Cc: <stable@vger.kernel.org> [v3.4+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit a3e199732b made the LED working again on HP Mini 210 but
with a wrong polarity. This patch fixes the polarity for this
machine, and also introduce a new model string "hp-inv-led".
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=772923
Cc: <stable@vger.kernel.org> [v3.3+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This will allow md/raid to know why the unplug was called,
and will be able to act according - if !from_schedule it
is safe to perform tasks which could themselves schedule.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
MD raid1 prepares to dispatch request in unplug callback. If make_request in
low level queue also uses unplug callback to dispatch request, the low level
queue's unplug callback will not be called. Recheck the callback list helps
this case.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both md and umem has similar code for getting notified on an
blk_finish_plug event.
Centralize this code in block/ and allow each driver to
provide its distinctive difference.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This seemed like a good idea at the time, but after further thought I
cannot see it making a difference other than very occasionally and
testing to try to exercise the case it is most likely to help did not
show any performance difference by removing it.
So remove the counting of active plugs and allow 'pending writes' to
be activated at any time, not just when no plugs are active.
This is only relevant when there is a write-intent bitmap, and the
updating of the bitmap will likely introduce enough delay that
the single-threading of bitmap updates will be enough to collect large
numbers of updates together.
Removing this will make it easier to centralise the unplug code, and
will clear the other for other unplug enhancements which have a
measurable effect.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add in-flight cmds to the tail. That way while searching
(during request completion),we will always get a hit on the
first element.
Signed-off-by: Chetan Loke <loke.chetan@gmail.com>
Acked-by: Paul.Clements@steeleye.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
freeze_fs/unfreeze_fs ops are called with s_umount held for write, not read.
Signed-off-by: Valerie Aurora <val@vaaconsulting.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that all users are converted, we can remove functions, variables, and
constants defined by the old freezing mechanism.
BugLink: https://bugs.launchpad.net/bugs/897421
Tested-by: Kamal Mostafa <kamal@canonical.com>
Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Massimo Morana <massimo.morana@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The only missing piece to make freezing work reliably with ext2 is to
stop iput() of unlinked inode from deleting the inode on frozen filesystem.
So add a necessary protection to ext2_evict_inode().
We also provide appropriate ->freeze_fs and ->unfreeze_fs functions.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We convert btrfs_file_aio_write() to use new freeze check. We also add proper
freeze protection to btrfs_page_mkwrite(). We also add freeze protection to
the transaction mechanism to avoid starting transactions on frozen filesystem.
At minimum this is necessary to stop iput() of unlinked file to change frozen
filesystem during truncation.
Checks in cleaner_kthread() and transaction_kthread() can be safely removed
since btrfs_freeze() will lock the mutexes and thus block the threads (and they
shouldn't have anything to do anyway).
CC: linux-btrfs@vger.kernel.org
CC: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We change nilfs_page_mkwrite() to provide proper freeze protection for
writeable page faults (we must wait for frozen filesystem even if the
page is fully mapped).
We remove all vfs_check_frozen() checks since they are now handled by
the generic code.
CC: linux-nilfs@vger.kernel.org
CC: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move check in ntfs_file_aio_write_nolock() to ntfs_file_aio_write() and
use new freeze protection.
CC: linux-ntfs-dev@lists.sourceforge.net
CC: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert check in fuse_file_aio_write() to using new freeze protection.
CC: fuse-devel@lists.sourceforge.net
CC: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We update gfs2_page_mkwrite() to use new freeze protection and the transaction
code to use freeze protection while the transaction is running. That is needed
to stop iput() of unlinked file from modifying the filesystem. The rest is
handled by the generic code.
CC: cluster-devel@redhat.com
CC: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Protect ocfs2_page_mkwrite() and ocfs2_file_aio_write() using the new freeze
protection. We also protect several ioctl entry points which were missing the
protection. Finally, we add freeze protection to the journaling mechanism so
that iput() of unlinked inode cannot modify a frozen filesystem.
CC: Mark Fasheh <mfasheh@suse.com>
CC: Joel Becker <jlbec@evilplan.org>
CC: ocfs2-devel@oss.oracle.com
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Generic code now blocks all writers from standard write paths. So we add
blocking of all writers coming from ioctl (we get a protection of ioctl against
racing remount read-only as a bonus) and convert xfs_file_aio_write() to a
non-racy freeze protection. We also keep freeze protection on transaction
start to block internal filesystem writes such as removal of preallocated
blocks.
CC: Ben Myers <bpm@sgi.com>
CC: Alex Elder <elder@kernel.org>
CC: xfs@oss.sgi.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We remove most of frozen checks since upper layer takes care of blocking all
writes. We have to handle protection in ext4_page_mkwrite() in a special way
because we cannot use generic block_page_mkwrite(). Also we add a freeze
protection to ext4_evict_inode() so that iput() of unlinked inode cannot modify
a frozen filesystem (we cannot easily instrument ext4_journal_start() /
ext4_journal_stop() with freeze protection because we are missing the
superblock pointer in ext4_journal_stop() in nojournal mode).
CC: linux-ext4@vger.kernel.org
CC: "Theodore Ts'o" <tytso@mit.edu>
BugLink: https://bugs.launchpad.net/bugs/897421
Tested-by: Kamal Mostafa <kamal@canonical.com>
Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Massimo Morana <massimo.morana@canonical.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There are several entry points which dirty pages in a filesystem. mmap
(handled by block_page_mkwrite()), buffered write (handled by
__generic_file_aio_write()), splice write (generic_file_splice_write),
truncate, and fallocate (these can dirty last partial page - handled inside
each filesystem separately). Protect these places with sb_start_write() and
sb_end_write().
->page_mkwrite() calls are particularly complex since they are called with
mmap_sem held and thus we cannot use standard sb_start_write() due to lock
ordering constraints. We solve the problem by using a special freeze protection
sb_start_pagefault() which ranks below mmap_sem.
BugLink: https://bugs.launchpad.net/bugs/897421
Tested-by: Kamal Mostafa <kamal@canonical.com>
Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Massimo Morana <massimo.morana@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It is unexpected to block reading of frozen filesystem because of atime update.
Also handling blocking on frozen filesystem because of atime update would make
locking more complex than it already is. So just skip atime update when
filesystem is frozen like we skip it when filesystem is remounted read-only.
BugLink: https://bugs.launchpad.net/bugs/897421
Tested-by: Kamal Mostafa <kamal@canonical.com>
Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Massimo Morana <massimo.morana@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Most of places where we want freeze protection coincides with the places where
we also have remount-ro protection. So make mnt_want_write() and
mnt_drop_write() (and their _file alternative) prevent freezing as well.
For the few cases that are really interested only in remount-ro protection
provide new function variants.
BugLink: https://bugs.launchpad.net/bugs/897421
Tested-by: Kamal Mostafa <kamal@canonical.com>
Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Massimo Morana <massimo.morana@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
vfs_check_frozen() tests are racy since the filesystem can be frozen just after
the test is performed. Thus in write paths we can end up marking some pages or
inodes dirty even though the file system is already frozen. This creates
problems with flusher thread hanging on frozen filesystem.
Another problem is that exclusion between ->page_mkwrite() and filesystem
freezing has been handled by setting page dirty and then verifying s_frozen.
This guaranteed that either the freezing code sees the faulted page, writes it,
and writeprotects it again or we see s_frozen set and bail out of page fault.
This works to protect from page being marked writeable while filesystem
freezing is running but has an unpleasant artefact of leaving dirty (although
unmodified and writeprotected) pages on frozen filesystem resulting in similar
problems with flusher thread as the first problem.
This patch aims at providing exclusion between write paths and filesystem
freezing. We implement a writer-freeze read-write semaphore in the superblock.
Actually, there are three such semaphores because of lock ranking reasons - one
for page fault handlers (->page_mkwrite), one for all other writers, and one of
internal filesystem purposes (used e.g. to track running transactions). Write
paths which should block freezing (e.g. directory operations, ->aio_write(),
->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem
takes the writer side.
Only that we don't really want to bounce cachelines of the semaphores between
CPUs for each write happening. So we implement the reader side of the semaphore
as a per-cpu counter and the writer side is implemented using s_writers.frozen
superblock field.
[AV: microoptimize sb_start_write(); we want it fast in normal case]
BugLink: https://bugs.launchpad.net/bugs/897421
Tested-by: Kamal Mostafa <kamal@canonical.com>
Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com>
Tested-by: Dann Frazier <dann.frazier@canonical.com>
Tested-by: Massimo Morana <massimo.morana@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit b38c77d82e moved the MTMSR_EERI macro from the KVM code to generic
ppc_asm.h code. However, while adding it in the headers for the ppc32 case,
it missed out to remove the former definition in the KVM code.
This patch fixes compilation on server type PPC32 targets with CONFIG_KVM
enabled.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
which can adapt equally well to fast/slow devices.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=gZrM
-----END PGP SIGNATURE-----
Merge tag 'writeback-proportions' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
Pull writeback updates from Wu Fengguang:
"Use time based periods to age the writeback proportions, which can
adapt equally well to fast/slow devices."
Fix up trivial conflict in comment in fs/sync.c
* tag 'writeback-proportions' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: Fix some comment errors
block: Convert BDI proportion calculations to flexible proportions
lib: Fix possible deadlock in flexible proportion code
lib: Proportions with flexible period
This will make modinfo more useful with regard
to discovering necessary firmware files.
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Michael Krufky <mkrufky@kernellabs.com>
Cc: Eddi De Pieri <eddi@depieri.net>
Cc: linux-media@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Dean Anderson <linux-dev@sensoray.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Features include:
- More preparatory patches for modularising NFSv2/v3/v4.
Split out the various NFSv2/v3/v4-specific code into separate
files
- More preparation for the NFSv4 migration code
- Ensure that OPEN(O_CREATE) observes the pNFS mds threshold parameters
- pNFS fast failover when the data servers are down
- Various cleanups and debugging patches
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Lc59
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Features include:
- More preparatory patches for modularising NFSv2/v3/v4. Split out
the various NFSv2/v3/v4-specific code into separate files
- More preparation for the NFSv4 migration code
- Ensure that OPEN(O_CREATE) observes the pNFS mds threshold
parameters
- pNFS fast failover when the data servers are down
- Various cleanups and debugging patches"
* tag 'nfs-for-3.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (67 commits)
nfs: fix fl_type tests in NFSv4 code
NFS: fix pnfs regression with directio writes
NFS: fix pnfs regression with directio reads
sunrpc: clnt: Add missing braces
nfs: fix stub return type warnings
NFS: exit_nfs_v4() shouldn't be an __exit function
SUNRPC: Add a missing spin_unlock to gss_mech_list_pseudoflavors
NFS: Split out NFS v4 client functions
NFS: Split out the NFS v4 filesystem types
NFS: Create a single nfs_clone_super() function
NFS: Split out NFS v4 server creating code
NFS: Initialize the NFS v4 client from init_nfs_v4()
NFS: Move the v4 getroot code to nfs4getroot.c
NFS: Split out NFS v4 file operations
NFS: Initialize v4 sysctls from nfs_init_v4()
NFS: Create an init_nfs_v4() function
NFS: Split out NFS v4 inode operations
NFS: Split out NFS v3 inode operations
NFS: Split out NFS v2 inode operations
NFS: Clean up nfs4_proc_setclientid() and friends
...
My static checker complains that we dereference "state" inside the call
to fft_to_mode() before checking for NULL. The comments say that it is
possible for "state" to be NULL so I have moved the dereference after
the check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This one fixes an s5m8767 regulator build breakage due to a merge conflict
caused by the MFD s5m API changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=NbHx
-----END PGP SIGNATURE-----
Merge tag 'mfd-for-linus-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Pull MFD fix from Samuel Ortiz:
"This one fixes an s5m8767 regulator build breakage due to a merge
conflict caused by the MFD s5m API changes."
* tag 'mfd-for-linus-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
regulator: Fix an s5m8767 build failure
The strcpy was being used to set the name of the board.
This was both wrong and redundant,
since the destination char* was read-only and
the name is set statically at compile time.
The type of the name field is changed to const char*
to prevent future errors.
Reported-by: Radek Masin <radek@masin.eu>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pull media updates from Mauro Carvalho Chehab:
"This is the first part of the media patches for v3.6.
This patch series contain:
- new DVB frontend: rtl2832
- new video drivers: adv7393
- some unused files got removed
- a selection API cleanup between V4L2 and V4L2 subdev API's
- a major redesign at v4l-ioctl2, in order to clean it up
- several driver fixes and improvements."
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (174 commits)
v4l: Export v4l2-common.h in include/linux/Kbuild
media: Revert "[media] Terratec Cinergy S2 USB HD Rev.2"
[media] media: Use pr_info not homegrown pr_reg macro
[media] Terratec Cinergy S2 USB HD Rev.2
[media] v4l: Correct conflicting V4L2 subdev selection API documentation
[media] Feature removal: V4L2 selections API target and flag definitions
[media] v4l: Unify selection flags documentation
[media] v4l: Unify selection flags
[media] v4l: Common documentation for selection targets
[media] v4l: Unify selection targets across V4L2 and V4L2 subdev interfaces
[media] v4l: Remove "_ACTUAL" from subdev selection API target definition names
[media] V4L: Remove "_ACTIVE" from the selection target name definitions
[media] media: dvb-usb: print mac address via native %pM
[media] s5p-tv: Use module_i2c_driver in sii9234_drv.c file
[media] media: gpio-ir-recv: add allowed_protos for platform data
[media] s5p-jpeg: Use module_platform_driver in jpeg-core.c file
[media] saa7134: fix spelling of detach in label
[media] cx88-blackbird: replace ioctl by unlocked_ioctl
[media] cx88: don't use current_norm
[media] cx88: fix a number of v4l2-compliance violations
...
When doing resync or repair, attempt to correct bad blocks, according
to WriteErrorSeen policy
Signed-off-by: Alex Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Create a simple helper that handles the common case of calling
__rbd_refresh_header() while holding the ctl_mutex.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add a new parameter to __rbd_refresh_header() through which the
version of the header object is passed back to the caller. In most
cases this isn't needed. The main motivation is to normalize
(almost) all calls to __rbd_refresh_header() so they are all
wrapped immediately by mutex_lock()/mutex_unlock().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This fixes a few issues in rbd_header_from_disk():
- There is a check intended to catch overflow, but it's wrong in
two ways.
- First, the type we don't want to overflow is size_t, not
unsigned int, and there is now a SIZE_MAX we can use for
use with that type.
- Second, we're allocating the snapshot ids and snapshot
image sizes separately (each has type u64; on disk they
grouped together as a rbd_image_header_ondisk structure).
So we can use the size of u64 in this overflow check.
- If there are no snapshots, then there should be no snapshot
names. Enforce this, and issue a warning if we encounter a
header with no snapshots but a non-zero snap_names_len.
- When saving the snapshot names into the header, be more direct
in defining the offset in the on-disk structure from which
they're being copied by using "snap_count" rather than "i"
in the array index.
- If an error occurs, the "snapc" and "snap_names" fields are
freed at the end of the function. Make those fields be null
pointers after they're freed, to be explicit that they are
no longer valid.
- Finally, move the definition of the local variable "i" to the
innermost scope in which it's needed.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
All of the callers of rbd_req_sync_op() except one pass a non-null
"ops" pointer. The only one that does not is rbd_req_sync_read(),
which passes CEPH_OSD_OP_READ as its "opcode" and, CEPH_OSD_FLAG_READ
for "flags".
By allocating the ops array in rbd_req_sync_read() and moving the
special case code for the null ops pointer into it, it becomes
clear that much of that code is not even necessary.
In addition, the "opcode" argument to rbd_req_sync_op() is never
actually used, so get rid of that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
rbd_header_add_snap() passes the address of a version variable to
rbd_req_sync_exec(), but it ignores the result. Just pass a null
pointer instead.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
