We've added a quirk to enable the recent Lenovo dock support, where it
overwrites the pin configs of NID 0x17 and 19, not only updating the
pin config cache. It works right after the boot, but the problem is
that the pin configs are occasionally cleared when the machine goes to
PM. Meanwhile the quirk writes the pin configs only at the pre-probe,
so this won't be applied any longer.
For addressing that issue, this patch moves the code to overwrite the
pin configs into HDA_FIXUP_ACT_INIT section so that it's always
applied at both probe and resume time.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195161
Fixes: 61fcf8ece9 ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On some boards setting power_save to a non 0 value leads to clicking /
popping sounds when ever we enter/leave powersaving mode. Ideally we would
figure out how to avoid these sounds, but that is not always feasible.
This commit adds a blacklist for devices where powersaving is known to
cause problems and disables it on these devices.
Note I tried to put this blacklist in userspace first:
https://github.com/systemd/systemd/pull/8128
But the systemd maintainers rightfully pointed out that it would be
impossible to then later remove entries once we actually find a way to
make power-saving work on listed boards without issues. Having this list
in the kernel will allow removal of the blacklist entry in the same commit
which fixes the clicks / plops.
The blacklist only applies to the default power_save module-option value,
if a user explicitly sets the module-option then the blacklist is not
used.
[ added an ifdef CONFIG_PM for the build error -- tiwai]
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These laptops have a combined jack to attach headsets, the U727 on
the left, the U757 on the right, but a headsets microphone doesn't
work. Using hdajacksensetest I found that pin 0x19 changed the
present state when plugging the headset, in addition to 0x21, but
didn't have the correct configuration (shown as "Not connected").
So this sets the configuration to the same values as the headphone
pin 0x21 except for the device type microphone, which makes it
work correctly. With the patch the configured pins for U727 are
Pin 0x12 (Internal Mic, Mobile-In): present = No
Pin 0x14 (Internal Speaker): present = No
Pin 0x19 (Black Mic, Left side): present = No
Pin 0x1d (Internal Aux): present = No
Pin 0x21 (Black Headphone, Left side): present = No
Signed-off-by: Jan-Marek Glogowski <glogow@fbihome.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Audigy 2 CA0102 chip (but most likely others from the emu10k1 family,
too) has a problem that from time to time it likes to do few DMA reads a
bit beyond its normal allocation and gets very confused if these reads get
blocked by a IOMMU.
For the first (reserved) page this happens multiple times at every
playback, for various synth pages it happens randomly, rarely for PCM
playback buffers and the page table memory itself.
All these reads seem to follow a similar pattern, observed read offsets
beyond the allocation end were 0x00, 0x40, 0x80 and 0xc0 (PCI cache line
multiples), so it looks like the device tries to accesses up to 256 extra
bytes.
As a workaround let's widen these DMA allocations by an extra page if we
detect that the device is behind a non-passthrough IOMMU (the DMA memory
should be relatively plenty on IOMMU systems).
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit a5003fc041 ("[ALSA] emu10k1 - simplify page allocation for synth")
switched from using the DMA allocator for synth DMA pages to manually
calling alloc_page().
However, this usage has an implicit assumption that the DMA address space
for the emu10k1-family chip is the same as the CPU physical address space
which is not true for a system with a IOMMU.
Since this made the synth part of the driver non-functional on such systems
let's effectively revert that commit (while keeping the
__synth_free_pages() simplification).
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When we get a IOMMU page fault for a emu10k1 device it is very hard to
discover which of chip many DMA allocations triggered it (since on a IOMMU
system the DMA address space is often very different from the CPU one).
Let's add optional debug printouts providing this information.
These debug printouts are only enabled on an explicit request via the
kernel dynamic debug mechanism.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have been calling dma_set_mask() and then dma_set_coherent_mask() with
the same value, but there is a dma_set_mask_and_coherent() function that
does exactly that so let's use it instead.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The emu10k1-family chips need the first page (index 0) reserved in their
page tables for some reason (every emu10k1 driver I've checked does this
without much of an explanation).
Using the first page for normal samples results in a broken playback.
However, we already have a dummy page allocated - so called "silent page"
and, in fact, had always been setting it as the first page in the chip page
table because an initialization of every entry of the page table to point
to a silent page happens after and overwrites the reserved_page allocation.
So the only thing remaining to remove the reserved_page allocation is a
trivial change to the page allocation logic to ignore the first page entry
and start its allocations from the second entry (index 1).
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since sync_power_state is moved to core it's better to use the helper
function to ensure the actual power state reaches target instead of
using the local helper functions already exsisting in hda code.
Signed-off-by: Abhijeet Kumar <abhijeet.kumar@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Thinkpad Dock device support for ALC298 platform.
It need to use SSID for the quirk table.
Because IdeaPad also has ALC298 platform.
Use verb for the quirk table will confuse.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This platform had two Dmic and single Dmic.
This update was for single Dmic.
This commit was for two Dmic.
Fixes: 75ee94b20b ("ALSA: hda - fix headset mic problem for Dell machines...")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
One of them has the codec of alc256 and the other one has the codec
of alc289.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALC256 has its own quirk to override the shutup call, and it contains
the COEF update for pulling down the headset jack control. Currently,
the COEF update is called after clearing the headphone pin, and this
seems triggering a stall of the codec communication, and results in a
long delay over a second at suspend.
A quick resolution is to swap the calls: at first with the COEF
update, then clear the headphone pin.
Fixes: 4a219ef8f3 ("ALSA: hda/realtek - Add ALC256 HP depop function")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198503
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add ALC215 its own depop functions for alc_init and alc_shutup.
Assign it to ALC225 usage.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch will enable headset mode for ALC215/ALC285/ALC289 platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit ffcd28d88e ("ALSA: hda - Select INPUT for Realtek
HD-audio codec") introduced the reverse-selection of CONFIG_INPUT for
Realtek codec in order to avoid the mess with dependency between
built-in and modules. Later on, we obtained IS_REACHABLE() macro
exactly for this kind of problems, and now we can remove th INPUT
selection in Kconfig and put IS_REACHABLE(INPUT) to the appropriate
places in the code, so that the driver doesn't need to select other
subsystem forcibly.
Fixes: ffcd28d88e ("ALSA: hda - Select INPUT for Realtek HD-audio codec")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # and build-tested
Signed-off-by: Takashi Iwai <tiwai@suse.de>
iMac 14,1 requires the same quirk as iMac 12,2, using GPIO 2 and 3 for
headphone and speaker output amps. Add the codec SSID quirk entry
(106b:0600) accordingly.
BugLink: http://lkml.kernel.org/r/CAEw6Zyteav09VGHRfD5QwsfuWv5a43r0tFBNbfcHXoNrxVz7ew@mail.gmail.com
Reported-by: Freaky <freaky2000@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is another Dell XPS 13 variant (SSID 1028:082a) that requires
the existing fixup for reducing the headphone noise.
This patch adds the quirk entry for that.
BugLink: http://lkml.kernel.org/r/CAHXyb9ZCZJzVisuBARa+UORcjRERV8yokez=DP1_5O5isTz0ZA@mail.gmail.com
Reported-and-tested-by: Francisco G. <frangio.1@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add ALC225 its own depop functions for alc_init and alc_shutup.
Add depop optimize step for headset mode functions.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALC299 is compatible with ALC225/295, thus it doesn't have to assign
its own model. Merge together with ALC225/295 code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There was a long-standing problem on HP Spectre X360 with Kabylake
where it lacks of the front speaker output in some situations. Also
there are other products showing the similar behavior. The culprit
seems to be the missing COEF setup on ALC codecs, ALC225/295/299,
which are all compatible.
This patch adds the proper COEF setup (to initialize idx 0x67 / bits
0x3000) for addressing the issue.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195457
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are two front mics on this machine, and current driver assign
the same name Mic to both of them, but pulseaudio can't handle them.
As a workaround, we change the location for one of them, then the
driver will assign "Front Mic" and "Mic" for them.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It has the codec alc256, and add its pin definition to pin quirk
table to let it apply ALC255_FIXUP_DELL1_MIC_NO_PRESENCE.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a headset jack on the front panel, when we plug a headset
into it, the headset mic can't trigger unsol events, and
read_pin_sense() can't detect its presence too. So add this fixup
to fix this issue.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell AIO had LineOut jack.
Add LineOut verb into this patch.
[ Additional notes:
the ALC274 codec seems requiring the fixed pin / DAC connections for
HP / line-out pins for enabling EQ for speakers; i.e. the HP / LO
pins expect to be connected with NID 0x03 while keeping the speaker
with NID 0x02. However, by adding a new line-out pin, the
auto-parser assigns the NID 0x02 for HP/LO pins as primary outputs.
As an easy workaround, we provide the preferred_pairs[] to map
forcibly for these pins. -- tiwai ]
Fixes: 75ee94b20b ("ALSA: hda - fix headset mic problem for Dell machines with alc274")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cannonlake HDMI codec has the same nid as Geminilake. This adds the
codec entry for it.
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add new support for ALC257 codec.
[ It's supposed to be almost equivalent with other ALC25x variants,
just adding another type and id -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are two issues after resuming from suspend on the
Audiotrak Prodigy 7.1 HiFi:
- the output volume is set to 100%
- microphone input isn't working anymore
This patch fixes these issues by reinitializing both codecs of the device
and restoring the previous volumes during resume.
Signed-off-by: Yussuf Khalil <dev@pp3345.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The function "release_firmware" is called in the current implementation of
the function "_request_firmware" after a failure was detected.
Link: https://elixir.free-electrons.com/linux/v4.14-rc8/source/drivers/base/firmware_class.c#L1196
Such a call should therefore not be repeated directly after the
corresponding error information was received in the local variable "err"
of the function "snd_korg1212_create".
Thus remove a misplaced function call.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It maybe the typo for ALC700 support patch.
To fix the bit value on this patch.
Fixes: 6fbae35a31 ("ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous fix for addressing the breakage in vmaster slave
initialization, commit a91d66129f ("ALSA: hda - Fix incorrect TLV
callback check introduced during set_fs() removal"), introduced a new
helper to process over each slave kctl. However, this helper passes
only the original kctl, not the virtual slave kctl. As a result,
HD-audio driver (which is the only user so far) couldn't initialize
the slave correctly because it's trying to update the value directly
with the original kctl, not with the mapped kctl.
This patch fixes the situation again by passing both the mapped slaved
and original slave kctls to the function. Luckily there is a single
caller as of now, so changing the call signature is no big matter.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197959
Fixes: a91d66129f ("ALSA: hda - Fix incorrect TLV callback check introduced during set_fs() removal")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Users have been using knob "model=dell-headset-multi" on Intel Skull
Canyon for a while.
Add the equivalent quirk, ALC269_FIXUP_DELL1_MIC_NO_PRESENCE for Skull
Canyon.
BugLink: https://bugs.launchpad.net/bugs/1732034
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sound works after a cold boot but not after a reboot from windows.
This patch will solve this issue. This is relation with Class-D power control.
[ The bug was reported in Bugzilla below for Sony VAIO SVS13A1C5E
-- tiwai]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197737
Cc: <stable@vger.kernel.org>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The biggest thing this release has been the conversion of the AC98 bus
to the driver model, that's been a long time coming so thanks to Robert
Jarzmik for his dedication there. Due to there being some AC97 MFD
there's a few fairly large changes in input and the MFD layer, mainly to
the wm97xx driver.
There's also some drivers/drm changes to support the new AMD Stoney
platform, these are shared with the DRM subsystem and should be being
merged via both.
Within the subsystem the overwhelming bulk of the changes is in the
Intel drivers which continue to need lots of cleanups and fixes, this
release they've also gained support for their open source firmware.
There's also some large changs in the core as Morimoto-san continues to
mirror operations into the component level in preparation for conversion
of drivers to that.
- The AC97 bus has finally caught up with the driver model thanks to
some dedicated and persistent work from Robert Jarzmik.
- Continued work from Morimoto-san on moving us towards being able to
use components for everything.
- Lots of cleanups for the Intel platform code, including support for
their open source audio firmware.
- Support for scaling MCLK with sample rate in simple-card.
- Support for AMD Stoney platform.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAloJhwMTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0KzbB/9tXryXYz3dnKVlm9rk+Cq0Xy4TrUNk
WY+Il+Di1b6CQJbAm9GSacJxR+siupZCjGC5roHznj/AA2l0RuxJXpxG40Db8ZX+
bDR7mIWtuTUJHazqXltafj9ydElRKVpOGPAi5YJhhW5bXQ3SR9fFy0D3mdcT02v4
SyMExhOMz+mdnuBhbWx9kqJ9LPzCs0ow+R4uoRgAQxpFXPBGtq06sMkK86lGfsl/
iRM36J6FIeIQQfSHG/dkkpoybVax43z4OH7G1IL2FOU7miwkjZh/TTh/xHTd86Mc
OOuGu4hB+MjvccSOa9HSrOqFjxtkZipstwqYVWoYQcUoIVpcg0YRk7TG
=5KBY
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.15
The biggest thing this release has been the conversion of the AC98 bus
to the driver model, that's been a long time coming so thanks to Robert
Jarzmik for his dedication there. Due to there being some AC97 MFD
there's a few fairly large changes in input and the MFD layer, mainly to
the wm97xx driver.
There's also some drivers/drm changes to support the new AMD Stoney
platform, these are shared with the DRM subsystem and should be being
merged via both.
Within the subsystem the overwhelming bulk of the changes is in the
Intel drivers which continue to need lots of cleanups and fixes, this
release they've also gained support for their open source firmware.
There's also some large changs in the core as Morimoto-san continues to
mirror operations into the component level in preparation for conversion
of drivers to that.
- The AC97 bus has finally caught up with the driver model thanks to
some dedicated and persistent work from Robert Jarzmik.
- Continued work from Morimoto-san on moving us towards being able to
use components for everything.
- Lots of cleanups for the Intel platform code, including support for
their open source audio firmware.
- Support for scaling MCLK with sample rate in simple-card.
- Support for AMD Stoney platform.
Confirmed with Kailang of Realtek, the pin 0x19 is for Headset Mic, and
the pin 0x1a is for Headphone Mic, he suggested to apply
ALC269_FIXUP_DELL1_MIC_NO_PRESENCE to fix this problem. And we
verified applying this FIXUP can fix this problem.
Cc: <stable@vger.kernel.org>
Cc: Kailang Yang <kailang@realtek.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
6dVh26uchcEQLN/XqUDt
=x306
-----END PGP SIGNATURE-----
Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Clevo-P51 mode support for ALC1220.
ALC1220 Clevo-p51
Speaker uses I2S output.
We therefore want to make sure 0x14 (Headphones) and 0x1b (Speakers)
use to stereo DAC 0x02.
Signed-off-by: Peisen Hou <pshou@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the struct timer_list
pointer to all timer callbacks, switch to using the new timer_setup()
and from_timer() to pass the timer pointer explicitly. These are all the
"mechanical" changes remaining in the sound subsystem.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have several Dell laptops which use the codec alc236, the headset
mic can't work on these machines. Following the commit 736f20a70, we
add the pin cfg table to make the headset mic work.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support for ALC236/ALC3204.
Add headset mode support for ALC236/ALC3204.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The refresh of HD-audio widget sysfs kobjects via
snd_hdac_refresh_widget_sysfs() is slightly racy.
The driver recreates the whole tree from scratch after deleting the
whole. When CONFIG_DEBUG_KOBJECT_RELEASE option is used, kobject
release doesn't happen immediately but delayed, while the re-creation
of the same named kobject happens soon after invoking kobject_put().
This may end up with the conflicts of duplicated kobjects, as found in
the bug report below.
In this patch, we take another approach to refresh the tree: instead
of recreating the whole tree, just add the new nodes and delete the
non-existing nodes. Since the refresh happens only once at
initialization, no longer race would happen.
Along with the code change, merge snd_hdac_refresh_widget_sysfs() with
the existing snd_hdac_refresh_widgets() with an additional bool flag
for simplifying the code.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197307
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For allowing user to apply the existing quirk on a machine with a
different SSID, add a new model string entry, alc700-ref.
The quirk itself was introduced in the commit b84e843644: "ALSA:
hda/realtek - Enable jack detection function for Intel ALC700")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 99b5c5bb9a ("ALSA: hda - Remove the use of set_fs()")
converted the get_kctl_0dB_offset() call for killing set_fs() usage in
HD-audio codec code. The conversion assumed that the TLV callback
used in HD-audio code is only snd_hda_mixer_amp() and applies the TLV
calculation locally.
Although this assumption is correct, and all slave kctls are actually
with that callback, the current code is still utterly buggy; it
doesn't hit this condition and falls back to the next check. It's
because the function gets called after adding slave kctls to vmaster.
By assigning a slave kctl, the slave kctl object is faked inside
vmaster code, and the whole kctl ops are overridden. Thus the
callback op points to a different value from what we've assumed.
More badly, as reported by the KERNEXEC and UDEREF features of PaX,
the code flow turns into the unexpected pitfall. The next fallback
check is SNDRV_CTL_ELEM_ACCESS_TLV_READ access bit, and this always
hits for each kctl with TLV. Then it evaluates the callback function
pointer wrongly as if it were a TLV array. Although currently its
side-effect is fairly limited, this incorrect reference may lead to an
unpleasant result.
For addressing the regression, this patch introduces a new helper to
vmaster code, snd_ctl_apply_vmaster_slaves(). This works similarly
like the existing map_slaves() in hda_codec.c: it loops over the slave
list of the given master, and applies the given function to each
slave. Then the initializer function receives the right kctl object
and we can compare the correct pointer instead of the faked one.
Also, for catching the similar breakage in future, give an error
message when the unexpected TLV callback is found and bail out
immediately.
Fixes: 99b5c5bb9a ("ALSA: hda - Remove the use of set_fs()")
Reported-by: PaX Team <pageexec@freemail.hu>
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While converting the error messages to the standard macros in the
commit 4e76a8833f ("ALSA: hda - Replace with standard printk"), a
superfluous '-' slipped in the code mistakenly. Its influence is
almost negligible, merely shows a dB value as negative integer instead
of positive integer (or vice versa) in the rare error message.
So let's kill this embarrassing byte to show more correct value.
Fixes: 4e76a8833f ("ALSA: hda - Replace with standard printk")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The assignment to variable tmp is redundant as the value is never
read and a new value is assigned to tmp in the following for-loop,
so remove the assignment.
Cleans up clang warning: Value stored to 'tmp' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The assignment to variable i is redundant as it is never read
because it is updated a little later on. Remove this assignment.
Cleans up clang warning: Value stored to 'i' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Variable dpcm is never used and hence can be removed. Variable
runtime is being assigned but is never read, so the assignment
is redundant and can be removed. Cleans up two clang warnings:
Value stored to 'dpcm' is never read
Value stored to 'runtime' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Variable result is being assigned a value from a calculation
however the variable is never read, so this redundant variable
can be removed.
Cleans up clang warning: Value stored to 'result' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If snd_hda_get_conn_list() fails then "conn" isn't initialized.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Using the ARRAY_SIZE macro improves the readability of the code.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 275353bb68 to fix a regression which can abort
'alsactl' program in alsa-utils due to assertion in alsa-lib.
alsactl: control.c:2513: snd_ctl_elem_value_get_integer: Assertion `idx < sizeof(obj->value.integer.value) / sizeof(obj->value.integer.value[0])' failed.
alsactl: control.c:2976: snd_ctl_elem_value_get_integer: Assertion `idx < ARRAY_SIZE(obj->value.integer.value)' failed.
This commit is a band-aid. In a point of usage of ALSA control interface,
the drivers still bring an issue that they prevent userspace applications
to have a consistent way to parse each levels of the dimension information
via ALSA control interface.
Let me investigate this issue. Current implementation of the drivers
have three control element sets with dimension information:
* 'Monitor Mixer Volume' (type: integer)
* 'VMixer Volume' (type: integer)
* 'VU-meters' (type: boolean)
Although the number of elements named as 'Monitor Mixer Volume' differs
depending on drivers in this group, it can be calculated by macros
defined by each driver (= (BX_NUM - BX_ANALOG_IN) * BX_ANALOG_IN). Each
of the elements has one member for value and has dimension information
with 2 levels (= BX_ANALOG_IN * (BX_NUM - BX_ANALOG_IN)). For these
elements, userspace applications are expected to handle the dimension
information so that all of the elements construct a matrix where the
number of rows and columns are represented by the dimension information.
The same way is applied to elements named as 'VMixer Volume'. The number
of these elements can also be calculated by macros defined by each
drivers (= PX_ANALOG_IN * BX_ANALOG_IN). Each of the element has one
member for value and has dimension information with 2 levels
(= BX_ANALOG_IN * PX_ANALOG_IN). All of the elements construct a matrix
with the dimension information.
An element named as 'VU-meters' gets a different way in a point of
dimension information. The element includes 96 members for value. The
element has dimension information with 3 levels (= 3 or 2 * 16 * 2). For
this element, userspace applications are expected to handle the dimension
information so that all of the members for value construct a matrix
where the number of rows and columns are represented by the dimension
information. This is different from the way for the former.
As a summary, the drivers were not designed to produce a consistent way to
parse the dimension information. This makes it hard for general userspace
applications such as amixer to parse the information by a consistent way,
and actually no userspace applications except for 'echomixer' utilize the
dimension information. Additionally, no drivers excluding this group use
the information.
The reverted commit was written based on the latter way. A commit
860c1994a7 ('ALSA: control: add dimension validator for userspace
elements') is written based on the latter way, too. The patch should be
reconsider too in the same time to re-define a consistent way to parse the
dimension information.
Reported-by: Mark Hills <mark@xwax.org>
Reported-by: S. Christian Collins <s.chriscollins@gmail.com>
Fixes: 275353bb68 ('ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members')
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On recent Intel platforms (Haswell, Broadwell, Skylake, ApolloLake,
KabyLake, ...), the IEC Coding Type (ICT) bitfield in the Digital
Converter Control #3 needs to be set explicitly for HDMI/DisplayPort
High Bit Rate (HBR) audio playback to work. This was not required in
earlier platforms when HBR was first introduced. The ICT bits are
defined in Section 7.3.3.9 of the HDaudio 1.0a specification.
Since the ICT bitfield was not specified for HDAudio 1.0 devices
(before 2009), we only program it on machines more recent than
Haswell.
We tested that this fix is not needed on Baytrail-I (MinnowBoard
Turbot) and believe by extension it also does not apply to Braswell.
[ Moved AC_VERB_SET_DIGI_CONVERT_3 definition to the right place
by tiwai ]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98797
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The hm->h.size is intended to hold the actual size of the hm struct
that is copied from userspace and should always be <= sizeof(*hm).
However, after copy_from_user(hm, puhm, hm->h.size), since userspace
process has full control over the memory region pointed by puhm, it is
possible that the value of hm->h.size is different from what is fetched-in
previously (get_user(hm->h.size, (u16 __user *)puhm)). In other words,
hm->h.size is overriden and the relation between hm->h.size and the hm
struct is broken.
This patch proposes to use a seperate variable, msg_size, to hold
the value of the first fetch and override hm->h.size to msg_size
after the second fetch to maintain the relation.
Signed-off-by: Meng Xu <mengxu.gatech@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make this const as it not modified anywhere. It is only used during a
copy operation. Also, add const to the declaration in header.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
BUG_ON() is the worst choice for a trivial sanity check.
Either it should be removed or replaced with a softer one like
WARN_ON() if still really needed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Add a jump target so that a bit of exception handling can be better
reused at the end of this function.
This issue was detected by using the Coccinelle software.
* The script "checkpatch.pl" pointed information out like the following.
ERROR: do not use assignment in if condition
Thus fix a few source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Add a jump target so that a bit of exception handling can be better
reused at the end of this function.
This issue was detected by using the Coccinelle software.
* The script "checkpatch.pl" pointed information out like the following.
ERROR: do not use assignment in if condition
Thus fix a few source code places.
[ This also fixed a potential use-after-free at error path of
snd_opl3_hwdep_new(), too -- tiwai ]
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of common code can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add jump targets so that a bit of exception handling can be better reused
at the end of these functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The CA0132 codec driver doesn't call the free function at its error
path of the probe, which leaves the allocated memory. Call
ca0132_free() properly at the error handling.
Fixes: a73d511c48 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When hda_codec_driver_probe meet error and return failure, we need
to free resource with patch_ops.free, or we will get resource leak.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Intel ALC 700 needs this patch for jack detection function.
Because ALC700's jack detect function defaults is disable.
So alc700 needs pathc to enable jack detection function.
Signed-off-by: PeiSen Hou <pshou@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit fb087eaaef ("ALSA: hda - hdmi eld control created based on pcm")
forget to filter out invalid pcm numbers, if there is only one invalid pcm
number, then this issue causes we create eld control for invalid pcm silently,
but when there are more than one invalid pcm numbers, then this issue bring
probe error looks like below dmesg:
"
kernel: [ 1.647283] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xc2967540)
kernel: [ 1.651192] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [ 1.651195] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [ 1.651197] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [ 1.651199] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [ 1.651201] snd_hda_intel 0000:00:03.0: Too many HDMI devices
kernel: [ 1.651203] snd_hda_intel 0000:00:03.0: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
kernel: [ 1.651676] snd_hda_intel 0000:00:03.0: control 3:0:0:ELD:0 is already present
kernel: [ 1.651787] snd_hda_codec_hdmi: probe of hdaudioC0D0 failed with error -16
"
This patch add invalid pcm number filter before calling hdmi_create_eld_ctl.
Fixes: fb087eaaef ("ALSA: hda - hdmi eld control created based on pcm")
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
kfree on NULL pointer is a no-op and therefore checking is redundant.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The asihpi driver has a debug printk code without proper KERN_
prefix. On recent kernels, KERN_CONT prefix is mandatory for
continued output lines. Put it properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_ac97_res_table are not supposed to change at runtime. All functions
working with snd_ac97_res_table provided by <sound/ac97_codec.h> work with
const snd_ac97_res_table. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used in a copy operation.
Done using Coccinelle:
@match disable optional_qualifier@
identifier s;
@@
static struct hw s = {...};
@ref@
position p;
identifier match.s;
@@
s@p
@good1@
position ref.p;
identifier match.s,f,c;
expression e;
@@
(
e = s@p
|
e = s@p.f
|
c(...,s@p.f,...)
|
c(...,s@p,...)
)
@bad depends on !good1@
position ref.p;
identifier match.s;
@@
s@p
@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct hw s;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ac97_pcm are not supposed to change at runtime. All functions
working with ac97_pcm provided by <sound/ac97_codec.h> work with
const ac97_pcm. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ac97_pcm are not supposed to change at runtime. All functions
working with ac97_pcm provided by <sound/ac97_codec.h> work with
const ac97_pcm. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo G50-70 (17aa:3978) with Conexant codec chip requires the
similar workaround for the inverted stereo dmic like other Lenovo
models.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1020657
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell laptops have another LED for mic-mute in addition to the master
mute. The former is tied with the capture switch (in a reverse way)
while the latter is tied with the master playback switch. We already
have an enum control to change the behavior for the master mute LED in
different ways, e.g. keeping always off or turning off at mute. But,
the mic-mute LED has no such management but its behavior is
hard-coded.
This patch implements an enum control to change the mic-mute LED
behavior like what we have for the master mute LED. The ctl provides
four modes: keep-on, keep-off, follow-capture and follow-mute. The
default mode is the last one, follow-mute, which follows the capture
mute, i.e. LED turning on when the capture is off, and turning off
when the capture is active.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add jump targets so that a bit of exception handling can be better reused
at the end of these functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
STAudio ADCIII has the same SSID as Hoontech STDSP24, but requires a
slightly different configuration. This patch allows user to choose
this model via model=staudio option to set the proper configuration
for the board.
Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=1048934
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit d42fe63d58 ("ALSA: emu10k1: Get rid of set_fs() usage")
converted the user-space copy hack with set_fs() to the direct
memcpy(), but one place was forgotten. This resulted in the error
from snd_emu10k1_init_efx(), eventually failed to load the driver.
Fix the missing piece.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196687
Fixes: d42fe63d58 ("ALSA: emu10k1: Get rid of set_fs() usage")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used in a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only passed as the 3rd argument to the
function snd_hda_gen_add_kctl, which is of type const.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of exception handling can be better reused
in these functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make this const as it is only used during a copy operation.
Done using Coccinelle
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make this const as it is only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make this const as it is only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make these const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The script “checkpatch.pl” pointed information out like the following.
Comparison to NULL could be written …
Thus fix the affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace the specification of data structures by variable references
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The script “checkpatch.pl” pointed information out like the following.
Comparison to NULL could be written …
Thus fix the affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Omit extra messages for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cannonlake is next generation Intel platform. This commit adds PCI ID for
it.
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Declare snd_akm4xxx structures as const as they are only passed
to the function snd_ice1712_akm4xxx_init. This argument is of type
const, so make the structures const.
Done using Coccinelle:
@match disable optional_qualifier@
identifier s;
position p;
@@
static struct snd_akm4xxx s@p={...};
@good1@
identifier match.s;
position p;
@@
snd_ice1712_akm4xxx_init(...,&s@p,...)
@bad@
identifier match.s;
position p!={match.p,good1.p};
@@
s@p
@depends on !bad disable optional_qualifier@
identifier match.s;
@@
static
+const
struct snd_akm4xxx s={...};
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Declare snd_ak4xxx_private structures as const as they are only passed
to the function snd_ice1712_akm4xxx_init. This argument is of type const,
so make the structures const.
Done using Coccinelle:
@match disable optional_qualifier@
identifier s;
position p;
@@
static struct snd_ak4xxx_private s@p={...};
@good1@
identifier match.s;
position p;
@@
snd_ice1712_akm4xxx_init(...,&s@p,...)
@bad@
identifier match.s;
position p!={match.p,good1.p};
@@
s@p
@depends on !bad disable optional_qualifier@
identifier match.s;
@@
static
+const
struct snd_ak4xxx_private s={...};
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Quite a few fixes here that have been sent since the merge window, the
biggest one is the fix from Tony for some confusion with the device
property API which was causing issues with the of-graph card. This is
fixed with some changes in the graph API itself as it seemed very likely
to be error prone.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlmB51ATHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0G39B/90DuMEckKIUVTPyIpyHetKl46eFRDJ
9t3EnovAZJX6zZ7bdlkcCg33wGmcIkn9PFfLpPcnbxYeKP0xGah/GGKec1K/aeTn
FiD2LjmO5Cc0adk5tEwqiVrL0cOVrUdXuMpvhoMQqD1EBzsgDQtUpG6EL8SGbrtd
dfSLFDrYHIBO2b3iZOZPJvqMPnh9jJ4zEyBwVpQGOCoQdD/AP5S84McxwGhlJfl4
UqAY8keZYlW/Gl1DSnc8BDDCuLrexdCEUAR/0Vz3QFQk+sSnKVlkE+XXo0L4AVZl
XoDGjB5DL8FjXPG7yKO0rAytFFFzSJCWwBRnESAIGKz9o5HIUfOZtE8Q
=10Px
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.13
Quite a few fixes here that have been sent since the merge window, the
biggest one is the fix from Tony for some confusion with the device
property API which was causing issues with the of-graph card. This is
fixed with some changes in the graph API itself as it seemed very likely
to be error prone.
Sony VAIO VPCL14M1R needs the quirk to make the speaker working properly.
Tested-by: Dmitriy <mexx400@yandex.ru>
Cc: <stable@vger.kernel.org>
Signed-off-by: Sergei A. Trusov <sergei.a.trusov@ya.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a pretty boring pull request, containing a few HD-audio
quirks and ID updates as usual suspects, as well as a fix for a
regression of FM801 chip on ia64 (what a legacy combination!)
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAll56twOHHRpd2FpQHN1
c2UuZGUACgkQbDGAVD0pKaQR9hAAoMI06lAQ1mIkGZ94ZAEUyQm3gOztGbLf7i17
Ek10iOOKawyp+ztzhLcoVWaznckpXoKSufGund/d9S2/krTx4pbg8oWidxJ9Ytl5
sBWUcRcgNdAhu6yoJToDQRCjVcejPT5CMUnLxN4vm1+5xtksOH845CWdhw7FhmsV
+yDhZnPdjaTZVmywjE+8N44F/JpmB2V+wLNpylRFur4YD18fHrqHxP55dxwO5LDD
gpbk4+2C7X5dLKviBn5QnUJsfZYf0hmTImiBGXblXeB2f8emKOBiFqw9T6pJNJOF
yCYRk/z7wdxWAOyqhzFn46MmLTGIFZKhKlX1eoN32uR0fwjnbY6XtOoL3mdIgs57
4F8M0xAEHuA4PP7J3gUqceczzBzFpmlNdajPDTRPK5onMCSKc+g2yz28MekwBB4u
Cavk5kZPous8QceAK7BukH1j8adEo9VPXa2ELV90aNx+jgQTi4Yy4dQ4LTzv97iV
D1yJXfLPtwoYzDw6FxeYJAr25sACJ22crXImCJktMjWftpT8ZUYYVy9ROvDVxrl5
VlfJ9XtoMvDT9D/9OcOrpa8BFWwsN75exwD1JxUiOyq2FpGHYg8aSl1GVHVlJSNE
ba+q52lTFzfmxKulPzfFYa0uhrrxsUNZpv5VZUBRXEHoaIlBzE8oGkz3yYEI0O5G
BjKoucY=
=y0Ak
-----END PGP SIGNATURE-----
Merge tag 'sound-4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This is a pretty boring pull request, containing a few HD-audio quirks
and ID updates as usual suspects, as well as a fix for a regression of
FM801 chip on ia64 (what a legacy combination!)"
* tag 'sound-4.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add mute led support for HP ProBook 440 G4
ALSA: hda/realtek - No loopback on ALC225/ALC295 codec
ALSA: hda/realtek - Update headset mode for ALC225
ALSA: fm801: Initialize chip after IRQ handler is registered
ALSA: hda/realtek - Update headset mode for ALC298
ALSA: hda - Add missing NVIDIA GPU codec IDs to patch table
Mic mute led does not work on HP ProBook 440 G4.
We can use CXT_FIXUP_MUTE_LED_GPIO fixup to support it.
BugLink: https://bugs.launchpad.net/bugs/1705586
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell new platform with new hardware layout.
Old headset mode policy will cause headset mode check type has a
chance to check fail.
So, we update new headset mode to match new hardware layout.
New headset mode policy also could suitable to old hardware layout.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With gcc-7, we get a warning about a possible string overflow:
sound/pci/pcxhr/pcxhr.c: In function 'pcxhr_probe':
sound/pci/pcxhr/pcxhr.c:1647:28: error: ' [PCM #' directive writing 7 bytes into a region of size between 1 and 32 [-Werror=format-overflow=]
The shortname can simply be removed, and the longname can
be changed into a shorter "name" string that is used in three
places. Making it a little shorter (40 bytes) avoids the risk of
overflowing completely, but I also use snprintf() here for
extra clarity.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
gcc-7 warns about a possible sprintf format string overflow with a
temporary buffer that is used to print from another buffer of the same
size:
sound/pci/rme9652/hdspm.c: In function 'snd_hdspm_create_alsa_devices':
sound/pci/rme9652/hdspm.c:2123:17: error: ' MIDIoverMADI' directive writing 13 bytes into a region of size between 1 and 32 [-Werror=format-overflow=]
This extends the temporary buffer to twice the size, and changes
the code to use the safer snprintf() across the entire file.
The longer buffer is still necessary to avoid a format-truncation
warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Using a temporary string produces warnings about a possible overflow
in sprintf:
sound/pci/mixart/mixart.c: In function 'snd_mixart_probe':
sound/pci/mixart/mixart.c:1353:28: error: ' [PCM #' directive writing 7 bytes into a region of size between 1 and 32 [-Werror=format-overflow=]
sprintf(card->shortname, "%s [PCM #%d]", mgr->shortname, i);
^~~~~~~~~~~~~~
sound/pci/mixart/mixart.c:1353:28: note: using the range [-2147483648, 2147483647] for directive argument
sound/pci/mixart/mixart.c:1353:3: note: 'sprintf' output between 10 and 51 bytes into a destination of size 32
sprintf(card->shortname, "%s [PCM #%d]", mgr->shortname, i);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/pci/mixart/mixart.c:1354:27: error: ' [PCM #' directive writing 7 bytes into a region of size between 1 and 80 [-Werror=format-overflow=]
sprintf(card->longname, "%s [PCM #%d]", mgr->longname, i);
^~~~~~~~~~~~~~
sound/pci/mixart/mixart.c:1354:27: note: using the range [-2147483648, 2147483647] for directive argument
sound/pci/mixart/mixart.c:1354:3: note: 'sprintf' output between 10 and 99 bytes into a destination of size 80
Skipping the intermediate, we can get gcc to see that it is in fact
safe here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit b56fa687e0 ("ALSA: fm801: detect FM-only card earlier")
rearranged initialization calls, i.e. it makes snd_fm801_chip_init() to
be called before we register interrupt handler and set PCI bus
mastering.
Somehow it prevents FM801-AU to work properly. Thus, partially revert
initialization order changed by commit mentioned above.
Fixes: b56fa687e0 ("ALSA: fm801: detect FM-only card earlier")
Reported-by: Émeric MASCHINO <emeric.maschino@gmail.com>
Tested-by: Émeric MASCHINO <emeric.maschino@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell new platform with new hardware layout.
Old headset mode policy will cause headset mode check type has a
chance to check fail.
So, we update new headset mode to match new hardware layout.
New headset mode policy also could suitable to old hardware layout.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add codec IDs for several recently released, pending, and historical
NVIDIA GPU audio controllers to the patch table, to allow the correct
patch functions to be selected for them.
Signed-off-by: Daniel Dadap <ddadap@nvidia.com>
Reviewed-by: Andy Ritger <aritger@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Small last-minute fixes for 4.13-rc1: a couple of PCM fixes for m68k,
a cleanup work for legacy ISA msnd driver, and a few HD-audio new IDs
and quirks.
-----BEGIN PGP SIGNATURE-----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=tGl3
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Small last-minute fixes for 4.13-rc1: a couple of PCM fixes for m68k,
a cleanup work for legacy ISA msnd driver, and a few HD-audio new IDs
and quirks"
* tag 'sound-fix-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add hdmi id for a Geminilake variant
ALSA: hda/realtek - New codec device ID for ALC1220
ALSA: pcm: Simplify check for dma_mmap_coherent() availability
ALSA: pcm: Protect call to dma_mmap_coherent() by check for HAS_DMA
ALSA: msnd: Optimize / harden DSP and MIDI loops
ALSA: hda/realtek - change the location for one of two front microphones
ALSA: opl4: Move inline before return type
Few GLK platform variants report a different vendor id. Add it.
Also add the missing check for GLK in is_haswell_plus().
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On this Lenovo machine, there are two front mics, and both of them are
assigned the same name "Mic", but pulseaudio can't support two mics
with the same name, as a workaround, we change the location for one of
them, then the driver will assign "Front Mic" and "Mic" for them.
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This development cycle resulted in a fair amount of changes in both
core and driver sides. The most significant change in ALSA core is
about PCM. Also the support of of-graph card and the new DAPM widget
for DSP are noteworthy changes in ASoC core. And there're lots of
small changes splat over the tree, as you can see in diffstat.
Below are a few highlights:
ALSA core:
- Removal of set_fs() hackery from PCM core stuff, and the code
reorganization / optimization thereafter
- Improved support of PCM ack ops, and a new ABI for improved
control/status mmap handling
- Lots of constifications in various codes
ASoC core:
- The support of of-graph card, which may work as a better generic
device for a replacement of simple-card
- New widget types intended mainly for use with DSPs
ASoC drivers:
- New drivers for Allwinner V3s SoCs
- Ensonic ES8316 codec support
- More Intel SKL and KBL works
- More device support for Intel SST Atom (mostly for cheap tablets and
2-in-1 devices)
- Support for Rockchip PDM controllers
- Support for STM32 I2S and S/PDIF controllers
- Support for ZTE AUD96P22 codecs
HD-audio:
- Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks
for HP and Dell machines
- A few more fixes for i915 component binding
Note that of-graph change may bring the conflicts with a later pull
request of devicetree, as currently found in linux-next.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAllbtmMOHHRpd2FpQHN1
c2UuZGUACgkQbDGAVD0pKaTMkhAAnqvRvh9nYBI1E2VGtJON/AFcsF4s6xdJd0ow
Bn5Kq/07rGWxAi8Cy69LM930eQrZl+xR69I7LMkC54BxVNhvhXNef7E5GXPbRi+3
l6dkBmkqvwmmHP5iiOxKtYSAnUfJitu1rmtAOVAjRh8rsWNeLuI8N8V/uilQBioi
lRywdBjdylub00H1DL8cmZHbrBb4pYrL/LepTswZL3I/UZ225fMiIGFd8tXpQPwZ
IKRZiuzrc3SykxSsL/aNeyxP+2qTYRtPfl/FGenKBBO2PJmGAb00yAdtQJRcD2eX
Xf1alfvpNgpy/U6+C7dJgNWQvvr+lPCaFXuMukIDno/zg/xD1V1Ev/fnbVEINLve
xMOnuJSGGaY6fu6eZ4Cck0VfZIj7UVA9x8zvBOKntIhq/VLfE7DDu3p9tiAZAVfH
nMOLAhy+0kFyHSrv6zVWQj+cmjPwLvaW7fNWVljL5/MWuF5GJi05DUOfV/vk8BaO
EnyVqe2ynzNLTsFpLHHy6XKgKtSTkPygxYSNuI7kSYAxD5qE6hXXKXTAqJ3LjDkO
tGiFmxp/vHrlNvcyRjXc30th/9PPj/mRBcJ2KyjXPa63L5ZW86PiyIHKxJA4yogv
y4z2ZlhIz90cZvpigFHtFqq1puVlDtKDbAaJ6AKrP8HEHUlMiPNApsSjWWBUcfzV
DXzrlg0=
=PUEh
-----END PGP SIGNATURE-----
Merge tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This development cycle resulted in a fair amount of changes in both
core and driver sides. The most significant change in ALSA core is
about PCM. Also the support of of-graph card and the new DAPM widget
for DSP are noteworthy changes in ASoC core. And there're lots of
small changes splat over the tree, as you can see in diffstat.
Below are a few highlights:
ALSA core:
- Removal of set_fs() hackery from PCM core stuff, and the code
reorganization / optimization thereafter
- Improved support of PCM ack ops, and a new ABI for improved
control/status mmap handling
- Lots of constifications in various codes
ASoC core:
- The support of of-graph card, which may work as a better generic
device for a replacement of simple-card
- New widget types intended mainly for use with DSPs
ASoC drivers:
- New drivers for Allwinner V3s SoCs
- Ensonic ES8316 codec support
- More Intel SKL and KBL works
- More device support for Intel SST Atom (mostly for cheap tablets
and 2-in-1 devices)
- Support for Rockchip PDM controllers
- Support for STM32 I2S and S/PDIF controllers
- Support for ZTE AUD96P22 codecs
HD-audio:
- Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks
for HP and Dell machines
- A few more fixes for i915 component binding"
* tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (418 commits)
ALSA: hda - Fix unbalance of i915 module refcount
ASoC: Intel: Skylake: Remove driver debugfs exit
ASoC: Intel: Skylake: explicitly add the headers sst-dsp.h
ALSA: hda/realtek - Remove GPIO_MASK
ALSA: hda/realtek - Fix typo of pincfg for Dell quirk
ALSA: pcm: add a documentation for tracepoints
ALSA: atmel: ac97c: fix error return code in atmel_ac97c_probe()
ALSA: x86: fix error return code in hdmi_lpe_audio_probe()
ASoC: Intel: Skylake: Add support to read firmware registers
ASoC: Intel: Skylake: Add sram address to sst_addr structure
ASoC: Intel: Skylake: Debugfs facility to dump module config
ASoC: Intel: Skylake: Add debugfs support
ASoC: fix semicolon.cocci warnings
ASoC: rt5645: Add quirk override by module option
ASoC: rsnd: make arrays path and cmd_case static const
ASoC: audio-graph-card: add widgets and routing for external amplifier support
ASoC: audio-graph-card: update bindings for amplifier support
ASoC: rt5665: calibration should be done before jack detection
ASoC: rsnd: constify dev_pm_ops structures.
ASoC: nau8825: change crosstalk-bypass property to bool type
...
The commit dba9b7b6ca ("ALSA: hda - Fix doubly initialization of
i915 component") contained a typo that leads to the unbalance of i915
module reference. The value to be checked is not chip->driver_type
but chip->driver_caps.
Fixes: dba9b7b6ca ("ALSA: hda - Fix doubly initialization of i915 component")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196219
Reported-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Add the SYSTEM_SCHEDULING bootup state to move various scheduler
debug checks earlier into the bootup. This turns silent and
sporadically deadly bugs into nice, deterministic splats. Fix some
of the splats that triggered. (Thomas Gleixner)
- A round of restructuring and refactoring of the load-balancing and
topology code (Peter Zijlstra)
- Another round of consolidating ~20 of incremental scheduler code
history: this time in terms of wait-queue nomenclature. (I didn't
get much feedback on these renaming patches, and we can still
easily change any names I might have misplaced, so if anyone hates
a new name, please holler and I'll fix it.) (Ingo Molnar)
- sched/numa improvements, fixes and updates (Rik van Riel)
- Another round of x86/tsc scheduler clock code improvements, in hope
of making it more robust (Peter Zijlstra)
- Improve NOHZ behavior (Frederic Weisbecker)
- Deadline scheduler improvements and fixes (Luca Abeni, Daniel
Bristot de Oliveira)
- Simplify and optimize the topology setup code (Lauro Ramos
Venancio)
- Debloat and decouple scheduler code some more (Nicolas Pitre)
- Simplify code by making better use of llist primitives (Byungchul
Park)
- ... plus other fixes and improvements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
sched/cputime: Refactor the cputime_adjust() code
sched/debug: Expose the number of RT/DL tasks that can migrate
sched/numa: Hide numa_wake_affine() from UP build
sched/fair: Remove effective_load()
sched/numa: Implement NUMA node level wake_affine()
sched/fair: Simplify wake_affine() for the single socket case
sched/numa: Override part of migrate_degrades_locality() when idle balancing
sched/rt: Move RT related code from sched/core.c to sched/rt.c
sched/deadline: Move DL related code from sched/core.c to sched/deadline.c
sched/cpuset: Only offer CONFIG_CPUSETS if SMP is enabled
sched/fair: Spare idle load balancing on nohz_full CPUs
nohz: Move idle balancer registration to the idle path
sched/loadavg: Generalize "_idle" naming to "_nohz"
sched/core: Drop the unused try_get_task_struct() helper function
sched/fair: WARN() and refuse to set buddy when !se->on_rq
sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming
sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c
sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h>
sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h>
...
GPIO_MASK was introduced in commit "df694daa3c01 [ALSA] hda-codec - Add
the support of ALC262,ALC883,ALC885,ALC861" but it's not being used. So
we can simply remove it.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PIN number for Dell headset mode of ALC3271 is wrong.
Fixes: fcc6c877a0 ("ALSA: hda/realtek - Support Dell headset mode for ALC3271")
Signed-off-by: Shih-Yuan Lee (FourDollars) <sylee@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
0x0285 Device ID was not used.
It just assigned for alias of ALC293 as backup.
So, remove it first.
Because our new codec will use this device ID.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the commit fcc88d91cd ("ALSA: hda - Bind with i915 component
before codec binding"), the binding with i915 audio component is moved
to be performed always at probing the controller. This fixed the
potential problems on IVB, but now it brought another issue on HSW and
BDW. These two platforms give two individual HD-audio controllers,
one for the analog codec on PCH and another for HDMI over gfx. Since
I decided to take a lazy path to check only AZX_DRIVER_PCH type in the
commit above, now both controllers try to bind with i915, and you see
a kernel WARNING.
This patch tries to address it again properly. Now a new DCAPS bit,
AZX_DCAPS_I915_COMPONENT, is introduced for indicating the binding
with i915 component in addition to the existing I915_POWERWELL bit
flag. Each PCI entry has to give this new flag if it requires the
binding with i915 component. For HSW/BDW PCH (i.e. the ones defined
by AZX_DCAPS_INTEL_PCH) doesn't contain AZX_DCAPS_I915_COMPONENT bit
while others have it.
While we're at it, add parentheses around the bit flag check for
avoiding possible compiler warnings, too.
The bug was spotted by Intel CI tests.
Fixes: fcc88d91cd ("ALSA: hda - Bind with i915 component before codec binding")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196219
Reported-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/device.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
995 608 0 1603 643 sound/pci/hda/hda_sysfs.o
File size After adding 'const':
text data bss dec hex filename
1035 544 0 1579 62b sound/pci/hda/hda_sysfs.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add DELL4_MIC_NO_PRESENCE model.
Add the pin configuration value of this machine into the pin_quirk
table to make DELL4_MIC_NO_PRESENCE apply to this machine.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We used a on-demand i915 component binding for IvyBridge and
SandyBridge HDMI codecs, but it has a potential problem of the nested
module loading. For avoiding that situation, assure the i915 binding
happening at the controller driver level for PCH controller devices,
where the initialization is performed in a detached work, instead of
calling from the codec driver probe.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's nonsense to register a card object when no codec is bound on it,
as we don't support the deferred codec binding. Instead of
registering an empty card object, just skip the registration by
returning an error from azx_codec_configure().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
azx_codec_configure() loops over the codecs found on the given
controller via a linked list. The code used to work in the past, but
in the current version, this may lead to an endless loop when a codec
binding returns an error.
The culprit is that the snd_hda_codec_configure() unregisters the
device upon error, and this eventually deletes the given codec object
from the bus. Since the list is initialized via list_del_init(), the
next object points to the same device itself. This behavior change
was introduced at splitting the HD-audio code code, and forgotten to
adapt it here.
For fixing this bug, just use a *_safe() version of list iteration.
Fixes: d068ebc25e ("ALSA: hda - Move some codes up to hdac_bus struct")
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recently we met a problem, the codec has valid adcs and input pins,
and they can form valid input paths, but the driver does not build
valid controls for them like "Mic boost", "Capture Volume" and
"Capture Switch".
Through debugging, I found the driver needs to shrink the invalid
adcs and input paths for this machine, so it will move the whole
column bitmap value to the previous column, after moving it, the
driver forgets to set the original column bitmap value to zero, as a
result, the driver will invalidate the path whose index value is the
original colume bitmap value. After executing this function, all
valid input paths are invalidated by a mistake, there are no any
valid input paths, so the driver won't build controls for them.
Fixes: 3a65bcdc57 ("ALSA: hda - Fix inconsistent input_paths after ADC reduction")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have a Lenovo machine with the codec ALC294 on it, without the
patch, the Node 0x0b is regarded as the loopback mixer, but the Node
0x0b in this codec is "Vendor Defined Widget" instead of the audio
mixer, please see the log below:
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Control: name="Beep Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
Control: name="Beep Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=4, ofs=0
And I have consulted with Realtek, so far the ALC234/274/294 all don't
have loopback mixer.
Cc: Kailang Yang <kailang@realtek.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Except ALC269.
This will reduce pop noise from headset or headphone.
If codec enter to power save state, when plug headset or headphone....
It has a chance to cut off power by system.
Our new codec use this procedure will be more stable during suspend
and resume state.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch will enable headset mode for ALC234/ALC274/ALC294 platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We checked the quirks specific to the recent Intel chips by checking
the PCI IDs manually, but it's becoming messy with lots of IS_SKL()
and other macros, as the amount accumulated.
For simplification, here the new AZX_DRIVER_SKL type is introduced,
and check chip->driver_type instead of the manual PCI ID. The short
name for this is still "HDA Intel PCH", so that it doesn't break the
existing user-space unnecessarily.
Suggested-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Broxton-T was a forgotten child and we didn't apply the quirks for
Skylake+ properly. Meanwhile, a quirk for reducing the DMA latency
seems specific to the early Broxton model, so we leave as is.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add this functions, it could support ALC256 for HP depop functions.
It also can solve some ALC256 machine plug headset cause power
off issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Coffelake is another Intel part, so need to add PCI ID for it.
Signed-off-by: Megha Dey <megha.dey@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many drivers bind the sequencer stuff in off-load by another driver
module, so that it's loaded only on demand. In the current code, this
mechanism doesn't work when the driver is built-in while the sequencer
is module. We check with IS_REACHABLE() and enable only when the
sequencer is in the same level of build.
However, this is basically a overshoot. The binder code
(snd-seq-device) is an individual module from the sequencer core
(snd-seq), and we just have to make the former a built-in while
keeping the latter a module for allowing the scenario like the above.
This patch achieves that by rewriting Kconfig slightly. Now, a driver
that provides the manual sequencer device binding should select
CONFIG_SND_SEQ_DEVICE in a way as
select SND_SEQ_DEVICE if SND_SEQUENCER != n
Note that the "!=n" is needed here to avoid the influence of the
sequencer core is module while the driver is built-in.
Also, since rawmidi.o may be linked with snd_seq_device.o when
built-in, we have to shuffle the code to make the linker happy.
(the kernel linker isn't smart enough yet to handle such a case.)
That is, snd_seq_device.c is moved to sound/core from sound/core/seq,
as well as Makefile.
Last but not least, the patch replaces the code using IS_REACHABLE()
with IS_ENABLED(), since now the condition meets always when enabled.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of the non-standard way to enable the build of snd-emux-synth
module inside Makefile, rewrite Kconfig to select the item explicitly
from each driver (sbawe and emu10k1). This is the standard way.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a slightly intensive rewrite of Kconfig and Makefile about
ALSA sequencer stuff.
The first major change is that the kconfig items for the sequencer are
moved to sound/core/seq/Kconfig. OK, that's easy.
The substantial change is that, instead of hackish top-level module
selection in Makefile, we define a Kconfig item for each sequencer
module. The driver that requires such sequencer components select
exclusively the kconfig items. This is more straightforward and
standard way.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_hw_constraint_list(), *_ratnums() and *_ratdens() receive the
const pointers. Constify the corresponding static objects for better
hardening.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A disorder is found in some ALC269 quirk entries for ASUS (1043:xxxx),
which should have been sorted in PCI SSID order. Rearrange them, so
that I won't overlook the already existing entry like I did a couple
of times in the past...
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS X705UD laptop requires the known fixup ALC256_FIXUP_ASUS_MIC
in order to fix headphone jack sensing and to enable use of the internal
microphone.
Unfortunately jack sensing for the headset mic is still not working.
[rearranged the position to keep the PCI SSID order -- tiwai]
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace the copy and the silence ops with the new PCM ops.
The conversion is straightforward with standard helper functions.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace the copy and the silence ops with the new PCM ops.
The conversion is straightforward with standard helper functions.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace the copy and the silence ops with the new PCM ops.
The conversion is straightforward with standard helper functions, and
now we can drop the bytes <-> frames conversions in callbacks.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace the copy and the silence ops with the new ops.
The conversion is straightforward with standard helper functions, and
now we can drop the bytes <-> frames conversions in callbacks.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace the copy and the silence ops with the new PCM ops.
Although we can refactor this messy code, at this time, the changes
are kept as small as possible. Let's clean up later.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace the copy and the silence ops with the new ops.
The conversion is straightforward with standard helper functions, and
now we can drop the bytes <-> frames conversions in callbacks.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace the copy ops with the new copy_user and copy_kernel ops.
It's used only for a capture stream (for some hardware workaround),
thus we need no silence operation.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous commit [63691587f7: ALSA: hda - Apply dual-codec quirk
for MSI Z270-Gaming mobo] attempted to apply the existing dual-codec
quirk for a MSI mobo. But it turned out that this isn't applied
properly due to the MSI-vendor quirk before this entry. I overlooked
such two MSI entries just because they were put in the wrong position,
although we have a list ordered by PCI SSID numbers.
This patch fixes it by rearranging the unordered entries.
Fixes: 63691587f7 ("ALSA: hda - Apply dual-codec quirk for MSI Z270-Gaming mobo")
Reported-by: Rudolf Schmidt <info@rudolfschmidt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that the indirect-PCM transfer helper gives back an error, we
should return the error from ack callbacks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that the indirect-PCM transfer helper gives back an error, we
should return the error from ack callbacks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that the indirect-PCM transfer helper gives back an error, we
should return the error from ack callbacks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This model is actually called 92XXM2-8 in Windows driver. But since pin
configs for M22 and M28 are identical, just reuse M22 quirk.
Fixes external microphone (tested) and probably docking station ports
(not tested).
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recently some laptops and mobos are equipped with the dual Realtek
codecs that require special quirks. For making the debugging easier,
add the model "dual-codecs" to be passed via module option.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MSI Z270-Gamin mobo has also two ALC1220 codecs like Gigabyte AZ370-
Gaming mobo. Apply the same quirk to this one.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Declare snd_kcontrol_new structures as const as they are only passed an
argument to the function snd_ctl_new1. This argument is of type const,
so snd_kcontrol_new structures having this property can be made const.
Done using Coccinelle:
@r disable optional_qualifier@
identifier x;
position p;
@@
static struct snd_kcontrol_new x@p={...};
@ok@
identifier r.x;
position p;
@@
snd_ctl_new1(&x@p,...)
@bad@
position p != {r.p,ok.p};
identifier r.x;
@@
x@p
@depends on !bad disable optional_qualifier@
identifier r.x;
@@
+const
struct snd_kcontrol_new x;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Declare snd_kcontrol_new structures as const as they are only passed an
argument to the function snd_ctl_new1. This argument is of type const,
so snd_kcontrol_new structures having this property can be made const.
Done using Coccinelle:
@r disable optional_qualifier@
identifier x;
position p;
@@
static struct snd_kcontrol_new x@p={...};
@ok@
identifier r.x;
position p;
@@
snd_ctl_new1(&x@p,...)
@bad@
position p != {r.p,ok.p};
identifier r.x;
@@
x@p
@depends on !bad disable optional_qualifier@
identifier r.x;
@@
+const
struct snd_kcontrol_new x;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Declare snd_kcontrol_new structures as const as they are only passed an
argument to the function snd_ctl_new1. This argument is of type const,
so snd_kcontrol_new structures having this property can be made const.
Done using Coccinelle:
@r disable optional_qualifier@
identifier x;
position p;
@@
static struct snd_kcontrol_new x@p={...};
@ok@
identifier r.x;
position p;
@@
snd_ctl_new1(&x@p,...)
@bad@
position p != {r.p,ok.p};
identifier r.x;
@@
x@p
@depends on !bad disable optional_qualifier@
identifier r.x;
@@
+const
struct snd_kcontrol_new x;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of set_fs() hackery, do the straight memcpy() by passing a
flag indicating the kernel space operation.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
set_fs() is used in HD-audio vmaster code to retrieve the TLV data of
each slave kctl. Since the slave is supposed to be a standard amp
kctl, we can call directly the supposed tlv callback instead of the
indirect call, so that we can remove the set_fs() hack.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now all the users of this workaround code is gone, and we can finally
remove the legacy codes from the core HD-audio module.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The generic parser is the only user of the bind-mixer controls, so we
can move the code there and clean up the core helper.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The beep mute switch for ALC268 needs to touch two NIDs, and we used
to apply the bind-mixer stuff. But the use case for ALC268 is fairly
easy to convert to an open-code in a shorter form. Since this is the
only user of the bind-ctls, we can clean up the common helper codes
later.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The comment at endif line was forgotten to be corrected when the
condition was converted to IS_REACHABLE(). Fix it, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALC299 has no loopback mixer, but the driver still tries to add a beep
control over the mixer NID which leads to the error at accessing it.
This patch fixes it by properly declaring mixer_nid=0 for this codec.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195775
Fixes: 28f1f9b26c ("ALSA: hda/realtek - Add new codec ID ALC299")
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The vx222 driver is using the explicit cast from the parent class
pointer, but it'll be broken when the structure field randomization is
applied. Use container_of() in a modern manner, instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This contains a one-liner change that has a significant impact:
disabling the build of OSS. It's been unmaintained for long time,
and we'd like to drop the stuff. Finally, as the first step, stop
the build. Let's see whether it works without much complaints.
Other than that, there are two small fixes for HD-audio.
-----BEGIN PGP SIGNATURE-----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=Na0H
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This contains a one-liner change that has a significant impact:
disabling the build of OSS. It's been unmaintained for long time, and
we'd like to drop the stuff. Finally, as the first step, stop the
build. Let's see whether it works without much complaints.
Other than that, there are two small fixes for HD-audio"
* tag 'sound-fix-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
sound: Disable the build of OSS drivers
ALSA: hda: Fix cpu lockup when stopping the cmd dmas
ALSA: hda - Add mute led support for HP EliteBook 840 G3
-----BEGIN PGP SIGNATURE-----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=lbS7
-----END PGP SIGNATURE-----
Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull hw lockdown support from David Howells:
"Annotation of module parameters that configure hardware resources
including ioports, iomem addresses, irq lines and dma channels.
This allows a future patch to prohibit the use of such module
parameters to prevent that hardware from being abused to gain access
to the running kernel image as part of locking the kernel down under
UEFI secure boot conditions.
Annotations are made by changing:
module_param(n, t, p)
module_param_named(n, v, t, p)
module_param_array(n, t, m, p)
to:
module_param_hw(n, t, hwtype, p)
module_param_hw_named(n, v, t, hwtype, p)
module_param_hw_array(n, t, hwtype, m, p)
where the module parameter refers to a hardware setting
hwtype specifies the type of the resource being configured. This can
be one of:
ioport Module parameter configures an I/O port
iomem Module parameter configures an I/O mem address
ioport_or_iomem Module parameter could be either (runtime set)
irq Module parameter configures an I/O port
dma Module parameter configures a DMA channel
dma_addr Module parameter configures a DMA buffer address
other Module parameter configures some other value
Note that the hwtype is compile checked, but not currently stored (the
lockdown code probably won't require it). It is, however, there for
future use.
A bonus is that the hwtype can also be used for grepping.
The intention is for the kernel to ignore or reject attempts to set
annotated module parameters if lockdown is enabled. This applies to
options passed on the boot command line, passed to insmod/modprobe or
direct twiddling in /sys/module/ parameter files.
The module initialisation then needs to handle the parameter not being
set, by (1) giving an error, (2) probing for a value or (3) using a
reasonable default.
What I can't do is just reject a module out of hand because it may
take a hardware setting in the module parameters. Some important
modules, some ipmi stuff for instance, both probe for hardware and
allow hardware to be manually specified; if the driver is aborts with
any error, you don't get any ipmi hardware.
Further, trying to do this entirely in the module initialisation code
doesn't protect against sysfs twiddling.
[!] Note that in and of itself, this series of patches should have no
effect on the the size of the kernel or code execution - that is
left to a patch in the next series to effect. It does mark
annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
an already existing field"
* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
Annotate hardware config module parameters in sound/pci/
Annotate hardware config module parameters in sound/oss/
Annotate hardware config module parameters in sound/isa/
Annotate hardware config module parameters in sound/drivers/
Annotate hardware config module parameters in fs/pstore/
Annotate hardware config module parameters in drivers/watchdog/
Annotate hardware config module parameters in drivers/video/
Annotate hardware config module parameters in drivers/tty/
Annotate hardware config module parameters in drivers/staging/vme/
Annotate hardware config module parameters in drivers/staging/speakup/
Annotate hardware config module parameters in drivers/staging/media/
Annotate hardware config module parameters in drivers/scsi/
Annotate hardware config module parameters in drivers/pcmcia/
Annotate hardware config module parameters in drivers/pci/hotplug/
Annotate hardware config module parameters in drivers/parport/
Annotate hardware config module parameters in drivers/net/wireless/
Annotate hardware config module parameters in drivers/net/wan/
Annotate hardware config module parameters in drivers/net/irda/
Annotate hardware config module parameters in drivers/net/hamradio/
Annotate hardware config module parameters in drivers/net/ethernet/
...
set_memory_* functions have moved to set_memory.h. Switch to this
explicitly.
Link: http://lkml.kernel.org/r/1488920133-27229-14-git-send-email-labbott@redhat.com
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It was a relatively calm development cycle, and no scaring changes are
seen in both core and driver sides. Here are some highlights:
ASoC:
- A new API for hooking up jacks more generically and easily
- Card longname is set based on DMI for a unique UCM profile
- Lots of Intel driver fixes: Atom, Broxton, Skylake and newer chips
- New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132,
HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton
NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with
DA7213
HD-audio:
- Many new quirks to support headset for various devices (mostly ASUS
ones) as usual
- Support for dual codecs on some Gigabyte mobos and Lenovo laptop
- Improvement on PCM position reporting for Skylake and newer
FireWire:
- New drivers for MOTU and RME Fireface series
- Updates for Digidesign Digi00x and TASCAM series
- Support for tracepoints
Others:
- USB-audio: improved support for quirk_alias option
- Cleanups, constification allover the places
-----BEGIN PGP SIGNATURE-----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=8RhW
-----END PGP SIGNATURE-----
Merge tag 'sound-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a relatively calm development cycle, and no scaring changes are
seen in both core and driver sides. Here are some highlights:
ASoC:
- A new API for hooking up jacks more generically and easily
- Card longname is set based on DMI for a unique UCM profile
- Lots of Intel driver fixes: Atom, Broxton, Skylake and newer chips
- New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132,
HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960,
Nuvoton NAU8824, Odroid systems, ST STM32 SAI controllers and x86
systems with DA7213
HD-audio:
- Many new quirks to support headset for various devices (mostly ASUS
ones) as usual
- Support for dual codecs on some Gigabyte mobos and Lenovo laptop
- Improvement on PCM position reporting for Skylake and newer
FireWire:
- New drivers for MOTU and RME Fireface series
- Updates for Digidesign Digi00x and TASCAM series
- Support for tracepoints
Others:
- USB-audio: improved support for quirk_alias option
- Cleanups, constification allover the places"
* tag 'sound-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (299 commits)
ASoC: codec: wm8960: Relax bit clock computation when using PLL
ASoC: codec: wm9860: avoid maybe-uninitialized warning
ASoC: nau8824: leave Class D gain at chip default
ASoC: nau8824: rename controls to match DAPM controls
ASoC: Intel: Skylake: Return negative error code
ASoC: Intel: Skylake: Fix unused variable warning
ASoC: Intel: Skylake: fix uninitialized pointer use
ASoC: sti: Fix error handling if of_clk_get() fails
ASoC: cs4271: configure reset GPIO as output
ASoC: dwc: Disallow building designware_pcm as a module
ALSA: ali5451: fix spelling mistake in "ali_capture_preapre"
ASoC: stm32: add SAI driver
ASoC: stm32: add bindings for SAI
ASoC: Intel: Skylake: Add loadable module support on KBL platform
ASoC: Intel: Skylake: Modify load_lib_ipc arguments for a nowait version
ASoC: Intel: Skylake: Register dsp_fw_ops for kabylake
ASoC: Intel: Skylake: Modify arguments to reuse module transfer function
ASoC: Intel: Skylake: Commonize library load
ASoC: Intel: Skylake: Move sst common initialization to a helper function
ASoC: nau8824: new driver
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJZB3/ZAAoJEL1qUBy3i3wm79YP/0lw2TXXpyrVImo9WjR7SUEB
XJCQdjvmbxVfPhyb5qzUIRLImQj4RPUzQ/qwnXmj9wmAKd8tlV/3ldg/xopDZXUd
XbDrvzsALIXryh6Ajfx4IMRoI7gQcQM82PBETNej2dS+1d1EUwAgoLQm99D6Q66Y
mtxdHsgZZkC/yENoFg4C+RS1+29Mb9lCfIJyug/Ram2aytHqkVfHpMQpp233UWgb
kkssbvMGCZJWgCS582w+S2MLFsStb1WYiDZcQt5SJSCnzzkvMEbuwHshL+5mQZpT
wquY5rgqIkRPt98In+Qj/rMnXetFzbczdIUEtbyyC+PRPElYgQIehzsS8cdaPSCS
98LruhiRoTeYO1gooeGhgUjZkTDH7xOXsDpvCCXlvcwFCCjoYoKHI6Ti/krWEgo5
RAMz5BRGHvGVEAit6faGbpUT0L643g4onT52e+omcfyvzOmOsGO4BN69O9IrvTvd
Jxbcj4Zh0uMZyeBvX2L4cg/9BYROhAvGXiuDr8JwOqvCOwCGrTffrFWCb0hOFGZB
/JeCyplCDpLHRu4ybPtE1Ele1ylnbJ9ywCoN+VZkpsIpRD+OK4XHiKFjnt55TVXY
GDt75r7oeahPXF9/sD31qzxrKCpBw/wkyEB62AxwbBWF9xo2fAv3q7mNGMQztkUy
rKgb4bGIRbGFuevXoo9j
=gJJi
-----END PGP SIGNATURE-----
Merge tag 'leds_for_4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"New drivers:
- add LED support for MT6323 PMIC
- add LED support for Motorola CPCAP PMIC
New features and improvements:
- add LED trigger for all CPUs aggregated which is useful on tiny
boards with more CPU cores than LED pins
- add OF variants of LED registering functions as a preparation for
adding generic support for Device Tree parsing
- dell-led improvements and cleanups, followed by moving it to the
x86 platform driver subsystem which is a more appropriate place for
it
- extend pca9532 Device Tree support by adding the LEDs
'default-state' property
- extend pca963x Device Tree support by adding nxp,inverted-out
property for inverting the polarity of the output
- remove ACPI support for lp3952 since it relied on a non-official
ACPI IDs"
* tag 'leds_for_4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: pca9532: Extend pca9532 device tree support
leds: cpcap: new driver
mfd: cpcap: Add missing include dependencies
leds: lp3952: Use 'if (ret)' pattern
leds: lp3952: Remove ACPI support for lp3952
leds: mt6323: Fix an off by one bug in probe
dt-bindings: leds: Add document bindings for leds-mt6323
leds: Add LED support for MT6323 PMIC
leds: gpio: use OF variant of LED registering function
leds: core: add OF variants of LED registering functions
platform/x86: dell-wmi-led: fix coding style issues
dell-led: move driver to drivers/platform/x86/dell-wmi-led.c
dell-led: remove code related to mic mute LED
platform/x86: dell-laptop: import dell_micmute_led_set() from drivers/leds/dell-led.c
ALSA: hda - rename dell_led_set_func to dell_micmute_led_set_func
ALSA: hda - use dell_micmute_led_set() instead of dell_app_wmi_led_set()
dell-led: remove GUID check from dell_micmute_led_set()
leds/trigger/cpu: Add LED trigger for all CPUs aggregated
trivial fix to spelling mistake in dev_warn message,
"ali_capture_preapre" should be "ali_capture_prepare"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo P520/420 build with two codecs.
ALC233 for front panel.
ALC662 for rear panel.
This patch will rename capture name for slove conflicts.
And create a card longname for UCM profile.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds some workarounds to make Gigabyte GA-AX370 Gaming 5
board working without the conflicts of kctls, etc. In general, the
dual codec configs result in the conflicts of the following stuff:
- Master controls
- Capture controls
- Analog loopback controls
In addition, the auto-mute and the auto-mic can't work well among
multiple codecs.
The current "solution" is to disable all these features, and use UCM
for a better PulseAudio management. For a dedicated UCM profile, the
patch overrides the card longname so that the system an get a unique
profile path.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195305
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Headset microphone does not work out of the box on ASUS Nx51
laptops. This patch fixes it.
Patch tested on Asus N551 laptop. Asus N751 part is not tested, but
according to [1] this laptop uses the same audiosystem.
1. https://bugzilla.kernel.org/show_bug.cgi?id=117781
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195437
Signed-off-by: Mikhail Paulyshka <me@mixaill.tk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image. Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.
To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify. The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.
Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.
This patch annotates drivers in sound/pci/.
Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jaroslav Kysela <perex@perex.cz>
cc: Takashi Iwai <tiwai@suse.com>
cc: alsa-devel@alsa-project.org
The HP ZBook 15u G3 has a Conexant CX20724 with mute led on GPIO1 and
mic mute led on GPIO2.
Adding CXT_FIXUP_MUTE_LED_GPIO inspired on patch_realtek's one.
Signed-off-by: Jerónimo Borque <jeronimo@borque.com.ar>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Geminilake vendor nid is different from other Skylake variants, but rest
of the initialization code is same.
So a variable is added in hdmi_spec to store the platform specific vendor
nid and move the initialization code to a helper function to be used by
both platform specific init.
Fixes: 126cfa2f5e ("ALSA: hda: Add Geminilake HDMI codec ID")
Signed-off-by: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com>
Cc: Senthilnathan Veppur <senthilnathanx.veppur@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Another preliminary patch for the dual-codec support: since the
support of vmaster over multiple codecs is difficult, simply disable
it by a new flag to hda_codec struct. A new user hint is added as
well for consistency.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
