Clean up all instances of checkpatch.pl checks:
CHECK: spaces preferred around that '+'
(and other operands)
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix all instances of the following checkpatch.pl check:
CHECK: braces {} should be used on all arms of this statement
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boolean tests do not need explicit comparison to true or false.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use timer API function del_timer_sync instead of driver
specific function _cancel_timer as besides deactivating
a timer, it also ensures that the timer is stopped on all
CPUs before the driver exists. Also, variables
timer_cancelled and bool are removed as they are no longer
needed.
@a@
expression x;
identifier y;
@@
- _cancel_timer (&x, &y);
+ del_timer_sync (&x);
@@type T; identifier a.y;@@
- T y;
...when != y
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
checkpatch.pl fix for
ERROR: space prohibited before that ',' (ctx:WxE)
Signed-off-by: Max Perepelitsyn <mperepelitsyn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
unused variables are removed. These variables were only assigned some
values and after that they were never being used. So they are safe to
be removed , and it has been build tested.
I left a call to r8712_read32(padapter, TCR) and
r8712_read8(padapter, SDIO_HCPWM) .
r8712_read32() and r8712_read8() is ultimately calling usb_read32()
and usb_read8() respectively. and they are again calling
r8712_usbctrl_vendorreq().
this r8712_usbctrl_vendorreq() is communicating through the usb bus
and is sending and receiving the control msg.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes these warning messages found by checkpatch.pl:
WARNING : Missing a blank line after declarations.
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The inline function _init_workitem() is just a wrapper around INIT_WORK().
Oddly, this wrapper accepts 3 parameters while INIT_WORK() only accepts 2.
The third parameter is unused.
Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_queue_empty is an inline wrapper around list_empty. This patch removes this
wrapper function and instead calls list_empty directly.
Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
get_list_head is an inline that returns &list->head. This patch removes this
inline and directly applies &list->head where applicable.
Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
get_next is just an inline wrapper around return list->next. This
patch removes the wrapper and directly uses list->next where
applicable.
Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
list_delete is just an inline wrapper around list_del_init. This patch
removes the wrapper and directly uses list_del_init.
Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
list_insert_tail is just an inline wrapper around list_add_tail. This
patch removes the wrapper and directly uses list_add_tail.
Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
is_list_empty is just an inline wrapper around list_empty. This patch
removes the wrapper and directly uses list_empty instead.
Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_init_listhead is just an inline wrapper around INIT_LIST_HEAD. This
patch removes the wrapper and directly uses INIT_LIST_HEAD instead.
Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes all usage of _malloc() and the function itself. Most
uses are straightforward replacements by kmalloc(..., GFP_ATOMIC),
because this was the definition of _malloc(). In a few places it
was possible to use kzalloc() or memdup_user.
A further improvement would be to replace GFP_ATOMIC with GFP_KERNEL
where possible.
Verified by compilation only.
Initial replacement done by running a Coccinelle script along the lines
of:
@@
type T;
expression E;
identifier V;
@@
- V = (T) _malloc(E);
+ V = kmalloc(E, GFP_ATOMIC);
@@
expression E, E1;
@@
- E1 = _malloc(E);
+ E1 = kmalloc(E, GFP_ATOMIC);
Signed-off-by: Vitaly Osipov <vitaly.osipov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver had headers like big_endian.h, little_endian.h, swab.h
and yet we can throw them all in the trash can and the thing
still builds on x86-64 and ppc, just by deleting the references
to the deleted files.
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
I am preparing to convert this driver from semaphore to mutex locking,
The first step has been to eliminate a number of semaphores that were
initialized but never used, and one whose only use was a single "up"
after initialization. A total of 9 semaphores were removed in this process.
One other change was to remove some inline semaphore routines that were
unused.
In addition, several cases had the following structure:
down()
if () {
...
}
up()
The locking overhead was reduced by moving the up/down inside the if
block.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In transmit path, r8712_free_xmitframe(), the pkt pointer is now
NULLed _within_ the spin lock.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Refactor the TX code to prepare for aggregation.
Signed-off-by: Ali Bahar <ali@internetDog.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This code is for a completely new version of the Realtek 8192 USB devices
such as the D-Link DWA-130. The Realtek code, which was originally for
Linux, Windows XP and Windows CE, has been stripped of all code not needed
for Linux. In addition, only one additional configuration variable, which
enables AP mode, remains.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Tested-by: Frederic Leroy <fredo@starox.org>
Luis de Bethencourt