nr_bitmaps member of mapping structure stores the number of already
allocated bitmaps and it is interpreted as loop iterator (it starts from
0 not from 1), so a comparison against number of possible bitmap
extensions should include this fact. This patch fixes this by changing
the extension failure condition. This issue has been introduced by
commit 4d852ef8c2 ("arm: dma-mapping: Add
support to extend DMA IOMMU mappings").
Reported-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Hyungwon Hwang <human.hwang@samsung.com>
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When dma-coherent transfers are enabled, the mmap call must
not change the pg_prot flags in the vma struct.
Split the arm_dma_mmap into a common and specific parts,
and add a "arm_coherent_dma_mmap" implementation that does
not alter the page protection flags.
Tested on a topic-miami board (Zynq) using the ACP port
to transfer data between FPGA and CPU using the Dyplo
framework. Without this patch, byte-wise access to mmapped
coherent DMA memory was about 20x slower because of the
memory being marked as non-cacheable, and transfer speeds
would not exceed 240MB/s.
After this patch, the mapped memory is cacheable and the
transfer speed is again 600MB/s (limited by the FPGA) when
the data is in the L2 cache, while data integrity is being
maintained.
The patch has no effect on non-coherent DMA.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Patch 22b3c181c6 ("arm: dma-mapping: limit
IOMMU mapping size") added a check for IO address space size. However
this patch broke IOMMU initialization for typical platforms initialized
from device tree, which get the default IO address space size of 4GiB.
This value doesn't fit into size_t and fails a check introduced by that
commit resulting in failed dma-mapping/iommu initialization. This patch
fixes this issue by adding proper support for full 4GiB address space
size.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull ARM updates from Russell King:
"Included in this update are both some long term fixes and some new
features.
Fixes:
- An integer overflow in the calculation of ELF_ET_DYN_BASE.
- Avoiding OOMs for high-order IOMMU allocations
- SMP requires the data cache to be enabled for synchronisation
primitives to work, so prevent the CPU_DCACHE_DISABLE option being
visible on SMP builds.
- A bug going back 10+ years in the noMMU ARM94* CPU support code,
where it corrupts registers. Found by folk getting Linux running
on their cameras.
- Versatile Express needs an errata workaround enabled for CPU
hot-unplug to work.
Features:
- Clean up module linker by handling out of range relocations
separately from relocation cases we don't handle.
- Fix a long term bug in the pci_mmap_page_range() code, which we
hope won't impact userspace (we hope there's no users of the
existing broken interface.)
- Don't map DMA coherent allocations when we don't have a MMU.
- Drop experimental status for SMP_ON_UP.
- Warn when DT doesn't specify ePAPR mandatory cache properties.
- Add documentation concerning how we find the start of physical
memory for AUTO_ZRELADDR kernels, detailing why we have chosen the
mask and the implications of changing it.
- Updates from Ard Biesheuvel to address some issues with large
kernels (such as allyesconfig) failing to link.
- Allow hibernation to work on modern (ARMv7) CPUs - this appears to
have never worked in the past on these CPUs.
- Enable IRQ_SHOW_LEVEL, which changes the /proc/interrupts output
format (hopefully without userspace breaking... let's hope that if
it causes someone a problem, they tell us.)
- Fix tegra-ahb DT offsets.
- Rework ARM errata 643719 code (and ARMv7 flush_cache_louis()/
flush_dcache_all()) code to be more efficient, and enable this
errata workaround by default for ARMv7+SMP CPUs. This complements
the Versatile Express fix above.
- Rework ARMv7 context code for errata 430973, so that only Cortex A8
CPUs are impacted by the branch target buffer flush when this
errata is enabled. Also update the help text to indicate that all
r1p* A8 CPUs are impacted.
- Switch ARM to the generic show_mem() implementation, it conveys all
the information which we were already reporting.
- Prevent slow timer sources being used for udelay() - timers running
at less than 1MHz are not useful for this, and can cause udelay()
to return immediately, without any wait. Using such a slow timer
is silly.
- VDSO support for 32-bit ARM, mainly for gettimeofday() using the
ARM architected timer.
- Perf support for Scorpion performance monitoring units"
vdso semantic conflict fixed up as per linux-next.
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (52 commits)
ARM: update errata 430973 documentation to cover Cortex A8 r1p*
ARM: ensure delay timer has sufficient accuracy for delays
ARM: switch to use the generic show_mem() implementation
ARM: proc-v7: avoid errata 430973 workaround for non-Cortex A8 CPUs
ARM: enable ARM errata 643719 workaround by default
ARM: cache-v7: optimise test for Cortex A9 r0pX devices
ARM: cache-v7: optimise branches in v7_flush_cache_louis
ARM: cache-v7: consolidate initialisation of cache level index
ARM: cache-v7: shift CLIDR to extract appropriate field before masking
ARM: cache-v7: use movw/movt instructions
ARM: allow 16-bit instructions in ALT_UP()
ARM: proc-arm94*.S: fix setup function
ARM: vexpress: fix CPU hotplug with CT9x4 tile.
ARM: 8276/1: Make CPU_DCACHE_DISABLE depend on !SMP
ARM: 8335/1: Documentation: DT bindings: Tegra AHB: document the legacy base address
ARM: 8334/1: amba: tegra-ahb: detect and correct bogus base address
ARM: 8333/1: amba: tegra-ahb: fix register offsets in the macros
ARM: 8339/1: Enable CONFIG_GENERIC_IRQ_SHOW_LEVEL
ARM: 8338/1: kexec: Relax SMP validation to improve DT compatibility
ARM: 8337/1: mm: Do not invoke OOM for higher order IOMMU DMA allocations
...
IOMMU should be able to use single pages as well as bigger blocks, so if
higher order allocations fail, we should not affect state of the system,
with events such as OOM killer, but rather fall back to order 0
allocations.
This patch changes the behavior of ARM IOMMU DMA allocator to use
__GFP_NORETRY, which bypasses OOM invocation, for orders higher than
zero and, only if that fails, fall back to normal order 0 allocation
which might invoke OOM killer.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When using the IOMMU-backed DMA ops for a device, we store a pointer to
the dma_iommu_mapping structure (used to keep track of the address
space) in the archdata.mapping field of the struct device.
Rather than access this field directly, use the to_dma_iommu_mapping
helper in dma-mapping, so that we don't really care where the mapping
information is held.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arm_iommu_create_mapping() has size parameter of size_t and
arm_setup_iommu_dma_ops() can take a value higher than that
when this is called from the OF code. So limit the size to
SIZE_MAX.
Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> (AMD Seattle)
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
CC: Joerg Roedel <joro@8bytes.org>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: Arnd Bergmann <arnd@arndb.de>
When validating the mask against the amount of memory we have available
(so that we can trap 32-bit DMA addresses with >32-bits memory), we had
not taken account of the fact that max_pfn is the maximum PFN number
plus one that would be in the system.
There are several references in the code which bear this out:
mm/page_owner.c:
for (; pfn < max_pfn; pfn++) {
}
arch/x86/kernel/setup.c:
high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Even without an iommu, NO_KERNEL_MAPPING is still convenient to save on
kernel address space in places where we don't need a kernel mapping.
Implement support for it in the two places where we're creating an
expensive mapping.
__alloc_from_pool uses an internal pool from which we already have
virtual addresses, so it's not relevant, and __alloc_simple_buffer uses
alloc_pages, which will always return a lowmem page, which is already
mapped into kernel space, so we can't prevent a mapping for it in that
case.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Carlo Caione <carlo@caione.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Drake <dsd@endlessm.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull ARM fix from Russell King:
"Just one fix this time around. __iommu_alloc_buffer() can cause a
BUG() if dma_alloc_coherent() is called with either __GFP_DMA32 or
__GFP_HIGHMEM set. The patch from Alexandre addresses this"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8305/1: DMA: Fix kzalloc flags in __iommu_alloc_buffer()
There doesn't seem to be any valid reason to allocate the pages array
with the same flags as the buffer itself. Doing so can eventually lead
to the following safeguard in mm/slab.c's cache_grow() to be hit:
if (unlikely(flags & GFP_SLAB_BUG_MASK)) {
pr_emerg("gfp: %un", flags & GFP_SLAB_BUG_MASK);
BUG();
}
This happens when buffers are allocated with __GFP_DMA32 or
__GFP_HIGHMEM.
Fix this by allocating the pages array with GFP_KERNEL to follow what is
done elsewhere in this file. Using GFP_KERNEL in __iommu_alloc_buffer()
is safe because atomic allocations are handled by __iommu_alloc_atomic().
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull ARM fixes from Russell King:
"A number of ARM fixes, the biggest is fixing a regression caused by
appended DT blobs exceeding 64K, causing the decompressor fixup code
to fail to patch the DT blob. Another important fix is for the ASID
allocator from Will Deacon which prevents some rare crashes seen on
some systems. Lastly, there's a build fix for v7M systems when printk
support is disabled.
The last two remaining fixes are more cosmetic - the IOMMU one
prevents an annoying harmless warning message, and we disable the
kernel strict memory permissions on non-MMU which can't support it
anyway"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8299/1: mm: ensure local active ASID is marked as allocated on rollover
ARM: 8298/1: ARM_KERNMEM_PERMS only works with MMU enabled
ARM: 8295/1: fix v7M build for !CONFIG_PRINTK
ARM: 8294/1: ATAG_DTB_COMPAT: remove the DT workspace's hardcoded 64KB size
ARM: 8288/1: dma-mapping: don't detach devices without an IOMMU during teardown
Commit 4bb25789ed ("arm: dma-mapping: plumb our iommu mapping ops
into arch_setup_dma_ops") moved the setting of the DMA operations from
arm_iommu_attach_device() to arch_setup_dma_ops() where the DMA
operations to be used are selected based on whether the device is
connected to an IOMMU. However, the IOMMU detection scheme requires the
IOMMU driver to be ported to the new IOMMU of_xlate API. As no driver
has been ported yet, this effectively breaks all IOMMU ARM users that
depend on the IOMMU being handled transparently by the DMA mapping API.
Fix this by restoring the setting of DMA IOMMU ops in
arm_iommu_attach_device() and splitting the rest of the function into a
new internal __arm_iommu_attach_device() function, called by
arch_setup_dma_ops().
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
When tearing down the DMA ops for a device via of_dma_deconfigure, we
unconditionally detach the device from its IOMMU domain. For devices
that aren't actually behind an IOMMU, this produces a "Not attached"
warning message on the console.
This patch changes the teardown code so that we don't detach from the
IOMMU domain when there isn't an IOMMU dma mapping to start with.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The iomm-config branch contains work from Will Deacon, quoting his description:
This series adds automatic IOMMU and DMA-mapping configuration for
OF-based DMA masters described using the generic IOMMU devicetree
bindings. Although there is plenty of future work around splitting up
iommu_ops, adding default IOMMU domains and sorting out automatic IOMMU
group creation for the platform_bus, this is already useful enough for
people to port over their IOMMU drivers and start using the new probing
infrastructure (indeed, Marek has patches queued for the Exynos IOMMU).
The branch touches core ARM and IOMMU driver files, and the respective
maintainers (Russell King and Joerg Roedel) agreed to have the contents
merged through the arm-soc tree. The final version was ready just before
the merge window, so we ended up delaying it a bit longer than the rest,
but we don't expect to see regressions because this is just additional
infrastructure that will get used in drivers starting in 3.20 but is
unused so far.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=ELLq
-----END PGP SIGNATURE-----
Merge tag 'iommu-config-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC/iommu configuration update from Arnd Bergmann:
"The iomm-config branch contains work from Will Deacon, quoting his
description:
This series adds automatic IOMMU and DMA-mapping configuration for
OF-based DMA masters described using the generic IOMMU devicetree
bindings. Although there is plenty of future work around splitting up
iommu_ops, adding default IOMMU domains and sorting out automatic IOMMU
group creation for the platform_bus, this is already useful enough for
people to port over their IOMMU drivers and start using the new probing
infrastructure (indeed, Marek has patches queued for the Exynos IOMMU).
The branch touches core ARM and IOMMU driver files, and the respective
maintainers (Russell King and Joerg Roedel) agreed to have the
contents merged through the arm-soc tree.
The final version was ready just before the merge window, so we ended
up delaying it a bit longer than the rest, but we don't expect to see
regressions because this is just additional infrastructure that will
get used in drivers starting in 3.20 but is unused so far"
* tag 'iommu-config-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
iommu: store DT-probed IOMMU data privately
arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops
arm: call iommu_init before of_platform_populate
dma-mapping: detect and configure IOMMU in of_dma_configure
iommu: fix initialization without 'add_device' callback
iommu: provide helper function to configure an IOMMU for an of master
iommu: add new iommu_ops callback for adding an OF device
dma-mapping: replace set_arch_dma_coherent_ops with arch_setup_dma_ops
iommu: provide early initialisation hook for IOMMU drivers
This patch plumbs the existing ARM IOMMU DMA infrastructure (which isn't
actually called outside of a few drivers) into arch_setup_dma_ops, so
that we can use IOMMUs for DMA transfers in a more generic fashion.
Since this significantly complicates the arch_setup_dma_ops function,
it is moved out of line into dma-mapping.c. If CONFIG_ARM_DMA_USE_IOMMU
is not set, the iommu parameter is ignored and the normal ops are used
instead.
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 513510ddba
(common: dma-mapping: introduce common remapping functions)
managed to end up with an extra return statement from the
original patch. Drop it.
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARM currently uses a bitmap for tracking atomic allocations. genalloc
already handles this type of memory pool allocation so switch to using
that instead.
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Riley <davidriley@chromium.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Ritesh Harjain <ritesh.harjani@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For architectures without coherent DMA, memory for DMA may need to be
remapped with coherent attributes. Factor out the the remapping code from
arm and put it in a common location to reduce code duplication.
As part of this, the arm APIs are now migrated away from
ioremap_page_range to the common APIs which use map_vm_area for remapping.
This should be an equivalent change and using map_vm_area is more correct
as ioremap_page_range is intended to bring in io addresses into the cpu
space and not regular kernel managed memory.
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Riley <davidriley@chromium.org>
Cc: Olof Johansson <olof@lixom.net>
Cc: Ritesh Harjain <ritesh.harjani@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Mitchel Humpherys <mitchelh@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, there are two users on CMA functionality, one is the DMA
subsystem and the other is the KVM on powerpc. They have their own code
to manage CMA reserved area even if they looks really similar. From my
guess, it is caused by some needs on bitmap management. KVM side wants
to maintain bitmap not for 1 page, but for more size. Eventually it use
bitmap where one bit represents 64 pages.
When I implement CMA related patches, I should change those two places
to apply my change and it seem to be painful to me. I want to change
this situation and reduce future code management overhead through this
patch.
This change could also help developer who want to use CMA in their new
feature development, since they can use CMA easily without copying &
pasting this reserved area management code.
In previous patches, we have prepared some features to generalize CMA
reserved area management and now it's time to do it. This patch moves
core functions to mm/cma.c and change DMA APIs to use these functions.
There is no functional change in DMA APIs.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Gleb Natapov <gleb@kernel.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When setting up the CMA region, we must ensure that the old section
mappings are flushed from the TLB before replacing them with page
tables, otherwise we can suffer from mismatched aliases if the CPU
speculatively prefetches from these mappings at an inopportune time.
A mismatched alias can occur when the TLB contains a section mapping,
but a subsequent prefetch causes it to load a page table mapping,
resulting in the possibility of the TLB containing two matching
mappings for the same virtual address region.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull ARM updates from Russell King:
- Major clean-up of the L2 cache support code. The existing mess was
becoming rather unmaintainable through all the additions that others
have done over time. This turns it into a much nicer structure, and
implements a few performance improvements as well.
- Clean up some of the CP15 control register tweaks for alignment
support, moving some code and data into alignment.c
- DMA properties for ARM, from Santosh and reviewed by DT people. This
adds DT properties to specify bus translations we can't discover
automatically, and to indicate whether devices are coherent.
- Hibernation support for ARM
- Make ftrace work with read-only text in modules
- add suspend support for PJ4B CPUs
- rework interrupt masking for undefined instruction handling, which
allows us to enable interrupts earlier in the handling of these
exceptions.
- support for big endian page tables
- fix stacktrace support to exclude stacktrace functions from the
trace, and add save_stack_trace_regs() implementation so that kprobes
can record stack traces.
- Add support for the Cortex-A17 CPU.
- Remove last vestiges of ARM710 support.
- Removal of ARM "meminfo" structure, finally converting us solely to
memblock to handle the early memory initialisation.
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (142 commits)
ARM: ensure C page table setup code follows assembly code (part II)
ARM: ensure C page table setup code follows assembly code
ARM: consolidate last remaining open-coded alignment trap enable
ARM: remove global cr_no_alignment
ARM: remove CPU_CP15 conditional from alignment.c
ARM: remove unused adjust_cr() function
ARM: move "noalign" command line option to alignment.c
ARM: provide common method to clear bits in CPU control register
ARM: 8025/1: Get rid of meminfo
ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type
ARM: 8066/1: correction for ARM patch 8031/2
ARM: 8049/1: ftrace/add save_stack_trace_regs() implementation
ARM: 8065/1: remove last use of CONFIG_CPU_ARM710
ARM: 8062/1: Modify ldrt fixup handler to re-execute the userspace instruction
ARM: 8047/1: rwsem: use asm-generic rwsem implementation
ARM: l2c: trial at enabling some Cortex-A9 optimisations
ARM: l2c: add warnings for stuff modifying aux_ctrl register values
ARM: l2c: print a warning with L2C-310 caches if the cache size is modified
ARM: l2c: remove old .set_debug method
ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this
...
- The 'dma-ranges' helps to take care of few DMAable system memory
restrictions by use of dma_pfn_offset which is maintained per
device. Arch code then uses it for dma address translations for such
cases. We update the dma_pfn_offset accordingly during DT the device
creation process.
- The 'dma-coherent' property is used to setup arch's coherent dma_ops.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Q7n3
-----END PGP SIGNATURE-----
Merge tag 'dt-dma-properties-for-arm' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into devel-stable
DT support for 'dma-ranges'and 'dma-coherent' properties with ARM updates
- The 'dma-ranges' helps to take care of few DMAable system memory
restrictions by use of dma_pfn_offset which is maintained per
device. Arch code then uses it for dma address translations for such
cases. We update the dma_pfn_offset accordingly during DT the device
creation process.
- The 'dma-coherent' property is used to setup arch's coherent dma_ops.
Avoid calling dma_cache_maint_page() when unmapping a DMA_TO_DEVICE
buffer. The L1 cache ops never do anything in this circumstance, nor
do they ever need to - all that matters for this case is that the data
written is visible to the device before DMA starts. What happens during
the transfer (provided the buffer is not written to) is of no real
consequence.
We already do this optimisation for the L2 cache.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
If CMA is turned on and CMA size is set to zero, kernel should
behave as if CMA was not enabled at compile time.
Every dma allocation should check existence of cma area
before requesting memory.
Signed-off-by: Gioh Kim <gioh.kim@lge.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
[mszyprow: removed redundant empty line from the patch]
Signed-off-by: <m.szyprowski@samsung.com>
mapping->size can be derived from mapping->bits << PAGE_SHIFT
which makes mapping->size as redundant.
Clean this up.
Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com>
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
On a 32 bit ARM architecture with LPAE extension physical addresses
cannot fit into unsigned long variable.
So fix it by using phys_addr_t instead of unsigned long.
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
68efd7d2fb("arm: dma-mapping: remove order parameter from
arm_iommu_create_mapping()") is causing kernel panic
because it wrongly sets the value of mapping->size:
Unable to handle kernel NULL pointer dereference at virtual
address 000000a0
pgd = e7a84000
[000000a0] *pgd=00000000
...
PC is at bitmap_clear+0x48/0xd0
LR is at __iommu_remove_mapping+0x130/0x164
Fix it by correcting mapping->size value.
Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Pull ARM changes from Russell King:
- Perf updates from Will Deacon:
- Support for Qualcomm Krait processors (run perf on your phone!)
- Support for Cortex-A12 (run perf stat on your FPGA!)
- Support for perf_sample_event_took, allowing us to automatically decrease
the sample rate if we can't handle the PMU interrupts quickly enough
(run perf record on your FPGA!).
- Basic uprobes support from David Long:
This patch series adds basic uprobes support to ARM. It is based on
patches developed earlier by Rabin Vincent. That approach of adding
hooks into the kprobes instruction parsing code was not well received.
This approach separates the ARM instruction parsing code in kprobes out
into a separate set of functions which can be used by both kprobes and
uprobes. Both kprobes and uprobes then provide their own semantic action
tables to process the results of the parsing.
- ARMv7M (microcontroller) updates from Uwe Kleine-König
- OMAP DMA updates (recently added Vinod's Ack even though they've been
sitting in linux-next for a few months) to reduce the reliance of
omap-dma on the code in arch/arm.
- SA11x0 changes from Dmitry Eremin-Solenikov and Alexander Shiyan
- Support for Cortex-A12 CPU
- Align support for ARMv6 with ARMv7 so they can cooperate better in a
single zImage.
- Addition of first AT_HWCAP2 feature bits for ARMv8 crypto support.
- Removal of IRQ_DISABLED from various ARM files
- Improved efficiency of virt_to_page() for single zImage
- Patch from Ulf Hansson to permit runtime PM callbacks to be available for
AMBA devices for suspend/resume as well.
- Finally kill asm/system.h on ARM.
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (89 commits)
dmaengine: omap-dma: more consolidation of CCR register setup
dmaengine: omap-dma: move IRQ handling to omap-dma
dmaengine: omap-dma: move register read/writes into omap-dma.c
ARM: omap: dma: get rid of 'p' allocation and clean up
ARM: omap: move dma channel allocation into plat-omap code
ARM: omap: dma: get rid of errata global
ARM: omap: clean up DMA register accesses
ARM: omap: remove almost-const variables
ARM: omap: remove references to disable_irq_lch
dmaengine: omap-dma: cleanup errata 3.3 handling
dmaengine: omap-dma: provide register read/write functions
dmaengine: omap-dma: use cached CCR value when enabling DMA
dmaengine: omap-dma: move barrier to omap_dma_start_desc()
dmaengine: omap-dma: move clnk_ctrl setting to preparation functions
dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registers
dmaengine: omap-dma: consolidate clearing channel status register
dmaengine: omap-dma: move CCR buffering disable errata out of the fast path
dmaengine: omap-dma: provide register definitions
dmaengine: omap-dma: consolidate setup of CCR
dmaengine: omap-dma: consolidate setup of CSDP
...
The 'order' parameter for IOMMU-aware dma-mapping implementation was
introduced mainly as a hack to reduce size of the bitmap used for
tracking IO virtual address space. Since now it is possible to dynamically
resize the bitmap, this hack is not needed and can be removed without any
impact on the client devices. This way the parameters for
arm_iommu_create_mapping() becomes much easier to understand. 'size'
parameter now means the maximum supported IO address space size.
The code will allocate (resize) bitmap in chunks, ensuring that a single
chunk is not larger than a single memory page to avoid unreliable
allocations of size larger than PAGE_SIZE in atomic context.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Instead of using just one bitmap to keep track of IO virtual addresses
(handed out for IOMMU use) introduce an array of bitmaps. This allows
us to extend existing mappings when running out of iova space in the
initial mapping etc.
If there is not enough space in the mapping to service an IO virtual
address allocation request, __alloc_iova() tries to extend the mapping
-- by allocating another bitmap -- and makes another allocation
attempt using the freshly allocated bitmap.
This allows arm iommu drivers to start with a decent initial size when
an dma_iommu_mapping is created and still to avoid running out of IO
virtual addresses for the mapping.
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
[mszyprow: removed extensions parameter to arm_iommu_create_mapping()
function, which will be modified in the next patch anyway, also some
debug messages about extending bitmap]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
The Coherant DMA allocator allocates pages of high order then splits
them up into smaller pages.
This splitting logic would run into problems if the allocator was
given compound pages. Thus the Coherant DMA allocator was originally
incompatible with compound pages existing and, by extension, huge
pages. A compile #error was put in place whenever huge pages were
enabled.
Compatibility with compound pages has since been introduced by the
following commit (which merely excludes GFP_COMP pages from being
requested by the coherant DMA allocator):
ea2e705 ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations
When huge page support was introduced to ARM, the compile #error in
dma-mapping.c was replaced by a #warning when it should have been
removed instead.
This patch removes the compile #warning in dma-mapping.c when huge
pages are enabled.
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
GFP_ATOMIC is not a single gfp flag, but a macro which expands to the other
flags and LACK of __GFP_WAIT flag. To check if caller wanted to perform an
atomic allocation, the code must test __GFP_WAIT flag presence. This patch
fixes the issue introduced in v3.6-rc5
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: stable@vger.kernel.org
The CMA region was being marked executable:
0xdc04e000-0xdc050000 8K RW x MEM/CACHED/WBRA
0xdc060000-0xdc100000 640K RW x MEM/CACHED/WBRA
0xdc4f5000-0xdc500000 44K RW x MEM/CACHED/WBRA
0xdcce9000-0xe0000000 52316K RW x MEM/CACHED/WBRA
This is mainly due to the badly worded MT_MEMORY_DMA_READY symbol, but
there are also a few other places in dma-mapping which should be
corrected to use the right constant. Fix all these places:
0xdc04e000-0xdc050000 8K RW NX MEM/CACHED/WBRA
0xdc060000-0xdc100000 640K RW NX MEM/CACHED/WBRA
0xdc280000-0xdc300000 512K RW NX MEM/CACHED/WBRA
0xdc6fc000-0xe0000000 58384K RW NX MEM/CACHED/WBRA
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Peter reports that OMAP audio broke with the recent fix for these
checks, caused by OMAP audio using a 64-bit DMA mask. We should
allow 64-bit DMA masks even with 32-bit dma_addr_t if we can be sure
the amount of RAM we have won't allow the 32-bit dma_addr_t to
overflow. Unfortunately, the checks to detect overflow were not
correct.
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Some buses have negative offsets, which causes the DMA mask checks to
falsely fail. Fix this by using the actual amount of memory fitted in
the system.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull ARM updates from Russell King:
"Included in this series are:
1. BE8 (modern big endian) changes for ARM from Ben Dooks
2. big.Little support from Nicolas Pitre and Dave Martin
3. support for LPAE systems with all system memory above 4GB
4. Perf updates from Will Deacon
5. Additional prefetching and other performance improvements from Will.
6. Neon-optimised AES implementation fro Ard.
7. A number of smaller fixes scattered around the place.
There is a rather horrid merge conflict in tools/perf - I was never
notified of the conflict because it originally occurred between Will's
tree and other stuff. Consequently I have a resolution which Will
forwarded me, which I'll forward on immediately after sending this
mail.
The other notable thing is I'm expecting some build breakage in the
crypto stuff on ARM only with Ard's AES patches. These were merged
into a stable git branch which others had already pulled, so there's
little I can do about this. The problem is caused because these
patches have a dependency on some code in the crypto git tree - I
tried requesting a branch I can pull to resolve these, and all I got
each time from the crypto people was "we'll revert our patches then"
which would only make things worse since I still don't have the
dependent patches. I've no idea what's going on there or how to
resolve that, and since I can't split these patches from the rest of
this pull request, I'm rather stuck with pushing this as-is or
reverting Ard's patches.
Since it should "come out in the wash" I've left them in - the only
build problems they seem to cause at the moment are with randconfigs,
and since it's a new feature anyway. However, if by -rc1 the
dependencies aren't in, I think it'd be best to revert Ard's patches"
I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences. Any errors are likely mine. Let's
see how the crypto issues work out..
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
ARM: 7871/1: amba: Extend number of IRQS
ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
ARM: 7878/1: nommu: Implement dummy early_paging_init()
ARM: 7876/1: clear Thumb-2 IT state on exception handling
ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
ARM: footbridge: fix build warnings for netwinder
ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
ARM: fix misplaced arch_virt_to_idmap()
ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
ARM: 7862/1: pcpu: replace __get_cpu_var_uses
ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
...
Pull DMA mask updates from Russell King:
"This series cleans up the handling of DMA masks in a lot of drivers,
fixing some bugs as we go.
Some of the more serious errors include:
- drivers which only set their coherent DMA mask if the attempt to
set the streaming mask fails.
- drivers which test for a NULL dma mask pointer, and then set the
dma mask pointer to a location in their module .data section -
which will cause problems if the module is reloaded.
To counter these, I have introduced two helper functions:
- dma_set_mask_and_coherent() takes care of setting both the
streaming and coherent masks at the same time, with the correct
error handling as specified by the API.
- dma_coerce_mask_and_coherent() which resolves the problem of
drivers forcefully setting DMA masks. This is more a marker for
future work to further clean these locations up - the code which
creates the devices really should be initialising these, but to fix
that in one go along with this change could potentially be very
disruptive.
The last thing this series does is prise away some of Linux's addition
to "DMA addresses are physical addresses and RAM always starts at
zero". We have ARM LPAE systems where all system memory is above 4GB
physical, hence having DMA masks interpreted by (eg) the block layers
as describing physical addresses in the range 0..DMAMASK fails on
these platforms. Santosh Shilimkar addresses this in this series; the
patches were copied to the appropriate people multiple times but were
ignored.
Fixing this also gets rid of some ARM weirdness in the setup of the
max*pfn variables, and brings ARM into line with every other Linux
architecture as far as those go"
* 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits)
ARM: 7805/1: mm: change max*pfn to include the physical offset of memory
ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations
ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations
ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function
ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit()
ARM: DMA-API: better handing of DMA masks for coherent allocations
ARM: 7857/1: dma: imx-sdma: setup dma mask
DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks
DMA-API: dcdbas: update DMA mask handing
DMA-API: dma: edma.c: no need to explicitly initialize DMA masks
DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
DMA-API: crypto: remove last references to 'static struct device *dev'
DMA-API: crypto: fix ixp4xx crypto platform device support
DMA-API: others: use dma_set_coherent_mask()
DMA-API: staging: use dma_set_coherent_mask()
DMA-API: usb: use new dma_coerce_mask_and_coherent()
DMA-API: usb: use dma_set_coherent_mask()
DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent()
DMA-API: net: octeon: use dma_coerce_mask_and_coherent()
DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent()
...
We need to start treating DMA masks as something which is specific to
the bus that the device resides on, otherwise we're going to hit all
sorts of nasty issues with LPAE and 32-bit DMA controllers in >32-bit
systems, where memory is offset from PFN 0.
In order to start doing this, we convert the DMA mask to a PFN using
the device specific dma_to_pfn() macro. This is the reverse of the
pfn_to_dma() macro which is used to get the DMA address for the device.
This gives us a PFN mask, which we can then check against the PFN
limit of the DMA zone.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
DMA mapping permissions were being derived from pgprot_kernel directly
without using PAGE_KERNEL. This causes them to be marked with executable
permission, which is not what we want. Fix this.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
... otherwise it is impossible for the low level iommu driver to
figure out which pte flags should be used.
In __map_sg_chunk we can derive the flags from dma_data_direction.
In __iommu_create_mapping we should treat the memory like
DMA_BIDIRECTIONAL and pass both IOMMU_READ and IOMMU_WRITE to
iommu_map.
__iommu_create_mapping is used during dma_alloc_coherent (via
arm_iommu_alloc_attrs). AFAIK dma_alloc_coherent is responsible for
allocation _and_ mapping. I think this implies that access to the
mapped pages should be allowed.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Pull ARM updates from Russell King:
"This set includes adding support for Neon acceleration of RAID6 XOR
code from Ard Biesheuvel, cache flushing and barrier updates from Will
Deacon, and a cleanup to the ARM debug code which reduces the amount
of code by about 500 lines.
A few other cleanups, such as constifying the machine descriptors
which already shouldn't be written to, cleaning up the printing of the
L2 cache size"
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (55 commits)
ARM: 7826/1: debug: support debug ll on hisilicon soc
ARM: 7830/1: delay: don't bother reporting bogomips in /proc/cpuinfo
ARM: 7829/1: Add ".text.unlikely" and ".text.hot" to arm unwind tables
ARM: 7828/1: ARMv7-M: implement restart routine common to all v7-M machines
ARM: 7827/1: highbank: fix debug uart virtual address for LPAE
ARM: 7823/1: errata: workaround Cortex-A15 erratum 773022
ARM: 7806/1: allow DEBUG_UNCOMPRESS for Tegra
ARM: 7793/1: debug: use generic option for ep93xx PL10x debug port
ARM: debug: move SPEAr debug to generic PL01x code
ARM: debug: move davinci debug to generic 8250 code
ARM: debug: move keystone debug to generic 8250 code
ARM: debug: remove DEBUG_ROCKCHIP_UART
ARM: debug: provide generic option choices for 8250 and PL01x ports
ARM: debug: move PL01X debug include into arch/arm/include/debug/
ARM: debug: provide PL01x debug uart phys/virt address configuration options
ARM: debug: add support for word accesses to debug/8250.S
ARM: debug: move 8250 debug include into arch/arm/include/debug/
ARM: debug: provide 8250 debug uart phys/virt address configuration options
ARM: debug: provide 8250 debug uart register shift configuration option
ARM: debug: provide 8250 debug uart flow control configuration option
...
The kernel TLB range invalidation functions already contain dsb
instructions before and after the maintenance, so there is no need to
introduce additional barriers.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Pull ARM DMA mapping updates from Marek Szyprowski:
"This contains important bugfixes and an update for IOMMU integration
support for ARM architecture"
* 'for-v3.11' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
ARM: dma: Drop __GFP_COMP for iommu dma memory allocations
ARM: DMA-mapping: mark all !DMA_TO_DEVICE pages in unmapping as clean
ARM: dma-mapping: NULLify dev->archdata.mapping pointer on detach
ARM: dma-mapping: convert DMA direction into IOMMU protection attributes
ARM: dma-mapping: Get pages if the cpu_addr is out of atomic_pool
We want to use CMA for allocating hash page table and real mode area for
PPC64. Hence move DMA contiguous related changes into a seperate config
so that ppc64 can enable CMA without requiring DMA contiguous.
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[removed defconfig changes]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
__iommu_alloc_buffer wants to split pages after allocation in order to
reduce the memory footprint. This does not work well with __GFP_COMP
pages, so drop this flag before allocation
One failure example is snd_malloc_dev_pages call dma_alloc_coherent with
__GFP_COMP.
Signed-off-by: Richard Zhao <rizhao@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
It is common for one sg to include many pages, so mark all these
pages as clean to avoid unnecessary flushing on them in
set_pte_at() or update_mmu_cache().
The patch might improve loading performance of applciation code a bit.
On the below test code to read file(~1GByte size) from usb mass storage
disk to buffer created with mmap(PROT_READ | PROT_EXEC) on
Pandaboard, average ~1% improvement can be observed with the patch on
10 times test.
unsigned int sum = 0;
static unsigned long tv_diff(struct timeval *tv1, struct timeval *tv2)
{
return (tv2->tv_sec - tv1->tv_sec) * 1000000 +
(tv2->tv_usec - tv1->tv_usec);
}
int main(int argc, char *argv[])
{
char *mbuffer;
int fd;
int i;
unsigned long page_size, size;
struct stat stat;
struct timeval t1, t2;
page_size = getpagesize();
fd = open(argv[1], O_RDONLY);
assert(fd >= 0);
fstat(fd, &stat);
size = stat.st_size;
printf("%s: file %s, file size %lu, page size %lu\n", argv[0],
read_filename, size, page_size);
gettimeofday(&t1, NULL);
mbuffer = mmap(NULL, size, PROT_READ | PROT_EXEC, MAP_SHARED, fd, 0);
for (i = 0 ; i < size ; i += page_size)
sum += mbuffer[i];
munmap(mbuffer, page_size);
gettimeofday(&t2, NULL);
printf("\tread mmaped time: %luus\n", tv_diff(&t1, &t2));
close(fd);
}
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
The current code only clobbers a local variable, so the device is left
with a stale mapping pointer.
Cc: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
IOMMU mappings take a prot parameter, identifying the protection bits
to enforce on the newly created mapping (READ or WRITE). The ARM
dma-mapping framework currently just passes 0 as the prot argument,
resulting in faulting mappings.
This patch infers the protection attributes based on the direction of
the DMA transfer.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
In __iommu_get_pages(), the cpu_addr is checked wheather in
atomic_pool range or not. So if the cpu_addr is in atomic_pool
range, it does not need to check twice.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
This patch adds support for hugetlbfs based on the x86 implementation.
It allows mapping of 2MB sections (see Documentation/vm/hugetlbpage.txt
for usage). The 64K pages configuration is not supported (section size
is 512MB in this case).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[steve.capper@linaro.org: symbolic constants replace numbers in places.
Split up into multiple files, to simplify future non-LPAE support,
removed huge_pmd_share code, as this is very rarely executed,
Added PROT_NONE support].
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
It is common for one sg to include many pages, so mark all these
pages as clean to avoid unnecessary flushing on them in
set_pte_at() or update_mmu_cache().
The patch might improve loading performance of applciation code a bit.
On the below test code to read file(~1GByte size) from usb mass storage
disk to buffer created with mmap(PROT_READ | PROT_EXEC) on
Pandaboard, average ~1% improvement can be observed with the patch on
10 times test.
unsigned int sum = 0;
static unsigned long tv_diff(struct timeval *tv1, struct timeval *tv2)
{
return (tv2->tv_sec - tv1->tv_sec) * 1000000 + (tv2->tv_usec - tv1->tv_usec);
}
int main(int argc, char *argv[])
{
char *mbuffer;
int fd;
int i;
unsigned long page_size, size;
struct stat stat;
struct timeval t1, t2;
page_size = getpagesize();
fd = open(argv[1], O_RDONLY);
assert(fd >= 0);
fstat(fd, &stat);
size = stat.st_size;
printf("%s: file %s, file size %lu, page size %lun", argv[0],
read_filename, size, page_size);
gettimeofday(&t1, NULL);
mbuffer = mmap(NULL, size, PROT_READ | PROT_EXEC, MAP_SHARED, fd, 0);
for (i = 0 ; i < size ; i += page_size)
sum += mbuffer[i];
munmap(mbuffer, page_size);
gettimeofday(&t2, NULL);
printf("tread mmaped time: %luusn", tv_diff(&t1, &t2));
close(fd);
}
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
In kmap_atomic(), kmap_high_get() is invoked for checking already
mapped area. In __flush_dcache_page() and dma_cache_maint_page(),
we explicitly call kmap_high_get() before kmap_atomic()
when cache_is_vipt(), so kmap_high_get() can be invoked twice.
This is useless operation, so remove one.
v2: change cache_is_vipt() to cache_is_vipt_nonaliasing() in order to
be self-documented
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Atomic pool should always be allocated from DMA zone if such zone is
available in the system to avoid issues caused by limited dma mask of
any of the devices used for making an atomic allocation.
Reported-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Stable <stable@vger.kernel.org> [v3.6+]
This patch removes page_address() usage in IOMMU-aware dma-mapping
implementation and replaced it with direct use of the cpu virtual address
provided by the caller. page_address() returned incorrect address for
pages remapped in atomic pool, what caused memory leak.
Reported-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Hiroshi Doyu <hdoyu@nvidia.com>
Alignment order for a dma iommu buffer is set by buffer size. For
large buffer, it is a waste of iommu address space. So configurable
parameter to limit maximum alignment order can reduce the waste.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin.park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
IOMMU can provide access to any memory page, so there is no point in
limiting the allocated pages only to lowmem, once other parts of
dma-mapping subsystem correctly supports himem pages.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
This patch adds missing pieces to correctly support memory pages served
from CMA regions placed in high memory zones. Please note that the default
global CMA area is still put into lowmem and is limited by optional
architecture specific DMA zone. One can however put device specific CMA
regions in high memory zone to reduce lowmem usage.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
This patch adds EXPORT_SYMBOL_GPL calls to the three arm iommu
functions - arm_iommu_create_mapping, arm_iommu_free_mapping
and arm_iommu_attach_device. These three functions are arm specific
wrapper functions for creating/freeing/using an iommu mapping and
they are called by various drivers. If any of these drivers need
to be built as dynamic modules, these functions need to be exported.
Changelog v2: using EXPORT_SYMBOL_GPL as suggested by Marek.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
[m.szyprowski: extended with recently introduced
EXPORT_SYMBOL_GPL(arm_iommu_detach_device)]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
struct dma_map_ops iommu_ops doesn't have ->set_dma_mask, which causes
crash when dma_set_mask() is called from some driver.
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Realview fails to boot with this warning:
BUG: spinlock lockup suspected on CPU#0, init/1
lock: 0xcf8bde10, .magic: dead4ead, .owner: init/1, .owner_cpu: 0
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:cf8bde10 r5:cf83d1c0 r4:cf8bde10 r3:cf83d1c0
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c018926c>] (spin_dump+0x84/0x98)
[<c01891e8>] (spin_dump+0x0/0x98) from [<c0189460>] (do_raw_spin_lock+0x100/0x198)
[<c0189360>] (do_raw_spin_lock+0x0/0x198) from [<c032cbac>] (_raw_spin_lock+0x3c/0x44)
[<c032cb70>] (_raw_spin_lock+0x0/0x44) from [<c01c9224>] (pl011_console_write+0xe8/0x11c)
[<c01c913c>] (pl011_console_write+0x0/0x11c) from [<c002aea8>] (call_console_drivers.clone.7+0xdc/0x104)
[<c002adcc>] (call_console_drivers.clone.7+0x0/0x104) from [<c002b320>] (console_unlock+0x2e8/0x454)
[<c002b038>] (console_unlock+0x0/0x454) from [<c002b8b4>] (vprintk_emit+0x2d8/0x594)
[<c002b5dc>] (vprintk_emit+0x0/0x594) from [<c0329718>] (printk+0x3c/0x44)
[<c03296dc>] (printk+0x0/0x44) from [<c002929c>] (warn_slowpath_common+0x28/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0070ab0>] (lockdep_trace_alloc+0xd8/0xf0)
[<c00709d8>] (lockdep_trace_alloc+0x0/0xf0) from [<c00c0850>] (kmem_cache_alloc+0x24/0x11c)
[<c00c082c>] (kmem_cache_alloc+0x0/0x11c) from [<c00bb044>] (__get_vm_area_node.clone.24+0x7c/0x16c)
[<c00bafc8>] (__get_vm_area_node.clone.24+0x0/0x16c) from [<c00bb7b8>] (get_vm_area_caller+0x48/0x54)
[<c00bb770>] (get_vm_area_caller+0x0/0x54) from [<c0020064>] (__alloc_remap_buffer.clone.15+0x38/0xb8)
[<c002002c>] (__alloc_remap_buffer.clone.15+0x0/0xb8) from [<c0020244>] (__dma_alloc+0x160/0x2c8)
[<c00200e4>] (__dma_alloc+0x0/0x2c8) from [<c00204d8>] (arm_dma_alloc+0x88/0xa0)[<c0020450>] (arm_dma_alloc+0x0/0xa0) from [<c00beb00>] (dma_pool_alloc+0xcc/0x1a8)
[<c00bea34>] (dma_pool_alloc+0x0/0x1a8) from [<c01a9d14>] (pl08x_fill_llis_for_desc+0x28/0x568)
[<c01a9cec>] (pl08x_fill_llis_for_desc+0x0/0x568) from [<c01aab8c>] (pl08x_prep_slave_sg+0x258/0x3b0)
[<c01aa934>] (pl08x_prep_slave_sg+0x0/0x3b0) from [<c01c9f74>] (pl011_dma_tx_refill+0x140/0x288)
[<c01c9e34>] (pl011_dma_tx_refill+0x0/0x288) from [<c01ca748>] (pl011_start_tx+0xe4/0x120)
[<c01ca664>] (pl011_start_tx+0x0/0x120) from [<c01c54a4>] (__uart_start+0x48/0x4c)
[<c01c545c>] (__uart_start+0x0/0x4c) from [<c01c632c>] (uart_start+0x2c/0x3c)
[<c01c6300>] (uart_start+0x0/0x3c) from [<c01c795c>] (uart_write+0xcc/0xf4)
[<c01c7890>] (uart_write+0x0/0xf4) from [<c01b0384>] (n_tty_write+0x1c0/0x3e4)
[<c01b01c4>] (n_tty_write+0x0/0x3e4) from [<c01acfe8>] (tty_write+0x144/0x240)
[<c01acea4>] (tty_write+0x0/0x240) from [<c01ad17c>] (redirected_tty_write+0x98/0xac)
[<c01ad0e4>] (redirected_tty_write+0x0/0xac) from [<c00c371c>] (vfs_write+0xbc/0x150)
[<c00c3660>] (vfs_write+0x0/0x150) from [<c00c39c0>] (sys_write+0x4c/0x78)
[<c00c3974>] (sys_write+0x0/0x78) from [<c0014460>] (ret_fast_syscall+0x0/0x3c)
This happens because the DMA allocation code is not respecting atomic
allocations correctly.
GFP flags should not be tested for GFP_ATOMIC to determine if an
atomic allocation is being requested. GFP_ATOMIC is not a flag but
a value. The GFP bitmask flags are all prefixed with __GFP_.
The rest of the kernel tests for __GFP_WAIT not being set to indicate
an atomic allocation. We need to do the same.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Subhash Jadavani reported this partial backtrace:
Now consider this call stack from MMC block driver (this is on the ARMv7
based board):
[<c001b50c>] (v7_dma_inv_range+0x30/0x48) from [<c0017b8c>] (dma_cache_maint_page+0x1c4/0x24c)
[<c0017b8c>] (dma_cache_maint_page+0x1c4/0x24c) from [<c0017c28>] (___dma_page_cpu_to_dev+0x14/0x1c)
[<c0017c28>] (___dma_page_cpu_to_dev+0x14/0x1c) from [<c0017ff8>] (dma_map_sg+0x3c/0x114)
This is caused by incrementing the struct page pointer, and running off
the end of the sparsemem page array. Fix this by incrementing by pfn
instead, and convert the pfn to a struct page.
Cc: <stable@vger.kernel.org>
Suggested-by: James Bottomley <JBottomley@Parallels.com>
Tested-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull DRM updates from Dave Airlie:
"This is the one and only next pull for 3.8, we had a regression we
found last week, so I was waiting for that to resolve itself, and I
ended up with some Intel fixes on top as well.
Highlights:
- new driver: nvidia tegra 20/30/hdmi support
- radeon: add support for previously unused DMA engines, more HDMI
regs, eviction speeds ups and fixes
- i915: HSW support enable, agp removal on GEN6, seqno wrapping
- exynos: IPP subsystem support (image post proc), HDMI
- nouveau: display class reworking, nv20->40 z compression
- ttm: start of locking fixes, rcu usage for lookups,
- core: documentation updates, docbook integration, monotonic clock
usage, move from connector to object properties"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (590 commits)
drm/exynos: add gsc ipp driver
drm/exynos: add rotator ipp driver
drm/exynos: add fimc ipp driver
drm/exynos: add iommu support for ipp
drm/exynos: add ipp subsystem
drm/exynos: support device tree for fimd
radeon: fix regression with eviction since evict caching changes
drm/radeon: add more pedantic checks in the CP DMA checker
drm/radeon: bump version for CS ioctl support for async DMA
drm/radeon: enable the async DMA rings in the CS ioctl
drm/radeon: add VM CS parser support for async DMA on cayman/TN/SI
drm/radeon/kms: add evergreen/cayman CS parser for async DMA (v2)
drm/radeon/kms: add 6xx/7xx CS parser for async DMA (v2)
drm/radeon: fix htile buffer size computation for command stream checker
drm/radeon: fix fence locking in the pageflip callback
drm/radeon: make indirect register access concurrency-safe
drm/radeon: add W|RREG32_IDX for MM_INDEX|DATA based mmio accesss
drm/exynos: support extended screen coordinate of fimd
drm/exynos: fix x, y coordinates for right bottom pixel
drm/exynos: fix fb offset calculation for plane
...
This patch adds support for DMA_ATTR_FORCE_CONTIGUOUS attribute for
dma_alloc_attrs() in IOMMU-aware implementation. For allocating physically
contiguous buffers Contiguous Memory Allocator is used.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Expose another DMA operations function: arm_dma_set_mask. This
function will be added to a custom DMA ops for Armada 370/XP.
Depending of its configuration Armada 370/XP can be set as a "nearly"
coherent architecture. In this case the DMA ops is made of:
- specific functions for this architecture
- already exposed arm DMA related functions
- the arm_dma_set_mask which was not exposed yet.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fix build warning in __dma_alloc() as below:
arch/arm/mm/dma-mapping.c: In function '__dma_alloc':
arch/arm/mm/dma-mapping.c:653:29: warning: 'page' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Remove arch_is_coherent() from iommu dma ops and implement separate
coherent ops functions.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
arch_is_coherent is problematic as it is a global symbol. This
doesn't work for multi-platform kernels or platforms which can support
per device coherent DMA.
This adds arm_coherent_dma_ops to be used for devices which connected
coherently (i.e. to the ACP port on Cortex-A9 or A15). The arm_dma_ops
are modified at boot when arch_is_coherent is true.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
With many IOMMU'able devices, console gets noisy.
Tegra30 has a few dozen of IOMMU'able devices.
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Skip unnecessary operations if order == 0. A little bit easier to
read.
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
When either of __alloc_from_contiguous or __alloc_remap_buffer fails
to provide a valid pointer, allocated memory is freed up and an error
is returned. 'pages' was however not freed before returning error.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
The __free_from_pool() function was changed in
e9da6e9905. Unfortunately, the test that
checks whether the provided (start,size) is within the DMA pool has
been improperly modified. It used to be:
if (start < coherent_head.vm_start || end > coherent_head.vm_end)
Where coherent_head.vm_end was non-inclusive (i.e, it did not include
the first byte after the pool). The test has been changed to:
if (start < pool->vaddr || start > pool->vaddr + pool->size)
So now pool->vaddr + pool->size is inclusive (i.e, it includes the
first byte after the pool), so the test should be >= instead of >.
This bug causes the following message when freeing the *first* DMA
coherent buffer that has been allocated, because its virtual address
is exactly equal to pool->vaddr + pool->size :
WARNING: at /home/thomas/projets/linux-2.6/arch/arm/mm/dma-mapping.c:463 __free_from_pool+0xa4/0xc0()
freeing wrong coherent size from pool
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Lior Amsalem <alior@marvell.com>
Cc: Maen Suleiman <maen@marvell.com>
Cc: Tawfik Bayouk <tawfik@marvell.com>
Cc: Shadi Ammouri <shadi@marvell.com>
Cc: Eran Ben-Avi <benavi@marvell.com>
Cc: Yehuda Yitschak <yehuday@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
[m.szyprowski: rebased onto v3.6-rc5 and resolved conflict]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Make use of the same atomic pool as DMA does, and skip a kernel page
mapping which can involve sleep'able operations at allocating a kernel
page table.
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Support atomic allocation in __iommu_get_pages().
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
[moved __atomic_get_pages() under #ifdef CONFIG_ARM_DMA_USE_IOMMU
to avoid unused fuction warning for no-IOMMU case]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Check the given range("start", "size") is included in "atomic_pool" or not.
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
struct page **pages is necessary to align with non atomic path in
__iommu_get_pages(). atomic_pool() has the intialized **pages instead
of just *page.
Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Print a loud warning when system runs out of memory from atomic DMA
coherent pool to let users notice the potential problem.
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Some platforms might require to increase atomic coherent pool to make
sure that their device will be able to allocate all their buffers from
atomic context. This function can be also used to decrease atomic
coherent pool size if coherent allocations are not used for the given
sub-platform.
Suggested-by: Josh Coombs <josh.coombs@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
The alignment mask is calculated incorrectly. Fixing the calculation
makes strange hangs/lockups disappear during the boot with Amstrad E3
and 3.6-rc1 kernel.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fix dma_contiguous_remap() so that it continues through all the
regions, even after encountering one that is outside lowmem.
Without this change, if you have two CMA regions, the first outside
lowmem and the seocnd inside lowmem, only the second one will get
set up in the MMU. Data written to that region then doesn't get
automatically flushed from the cache into memory.
Signed-off-by: Chris Brand <cbrand@broadcom.com>
[extended patch subject with 'fix' word]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Pull DMA-mapping updates from Marek Szyprowski:
"Those patches are continuation of my earlier work.
They contains extensions to DMA-mapping framework to remove limitation
of the current ARM implementation (like limited total size of DMA
coherent/write combine buffers), improve performance of buffer sharing
between devices (attributes to skip cpu cache operations or creation
of additional kernel mapping for some specific use cases) as well as
some unification of the common code for dma_mmap_attrs() and
dma_mmap_coherent() functions. All extensions have been implemented
and tested for ARM architecture."
* 'for-linus-for-3.6-rc1' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
ARM: dma-mapping: add support for DMA_ATTR_SKIP_CPU_SYNC attribute
common: DMA-mapping: add DMA_ATTR_SKIP_CPU_SYNC attribute
ARM: dma-mapping: add support for dma_get_sgtable()
common: dma-mapping: introduce dma_get_sgtable() function
ARM: dma-mapping: add support for DMA_ATTR_NO_KERNEL_MAPPING attribute
common: DMA-mapping: add DMA_ATTR_NO_KERNEL_MAPPING attribute
common: dma-mapping: add support for generic dma_mmap_* calls
ARM: dma-mapping: fix error path for memory allocation failure
ARM: dma-mapping: add more sanity checks in arm_dma_mmap()
ARM: dma-mapping: remove custom consistent dma region
mm: vmalloc: use const void * for caller argument
scatterlist: add sg_alloc_table_from_pages function
This patch adds support for DMA_ATTR_SKIP_CPU_SYNC attribute for
dma_(un)map_(single,page,sg) functions family. It lets dma mapping clients
to create a mapping for the buffer for the given device without performing
a CPU cache synchronization. CPU cache synchronization can be skipped for
the buffers which it is known that they are already in 'device' domain (CPU
caches have been already synchronized or there are only coherent mappings
for the buffer). For advanced users only, please use it with care.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch adds support for dma_get_sgtable() function which is required
to let drivers to share the buffers allocated by DMA-mapping subsystem.
Generic implementation based on virt_to_page() is not suitable for ARM
dma-mapping subsystem.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch adds support for DMA_ATTR_NO_KERNEL_MAPPING attribute for
IOMMU allocations, what let drivers to save precious kernel virtual
address space for large buffers that are intended to be accessed only
from userspace.
This patch is heavily based on initial work kindly provided by Abhinav
Kochhar <abhinav.k@samsung.com>.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
