Simplify the callers of insert_header by removing explicit calls to check
for duplicates and instead have insert_header do the work.
This makes the code slightly more maintainable by enabling changes to
data structures where the insertion of new entries without duplicate
suppression is not possible.
There is not always a convenient path string where insert_header
is called so modify sysctl_check_dups to use sysctl_print_dir
when printing the full path when a duplicate is discovered.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
An nsproxy argument here has always been awkard and now the nsproxy argument
is completely unnecessary so remove it, replacing it with the set we want
the registered tables to show up in.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Piecing together directories by looking first in one directory
tree, than in another directory tree and finally in a third
directory tree makes it hard to verify that some directory
entries are not multiply defined and makes it hard to create
efficient implementations the sysctl filesystem.
Replace the sysctl wide list of roots with autogenerated
links from the core sysctl directory tree to the other
sysctl directory trees.
This simplifies sysctl directory reading and lookups as now
only entries in a single sysctl directory tree need to be
considered.
Benchmark before:
make-dummies 0 999 -> 0.44s
rmmod dummy -> 0.065s
make-dummies 0 9999 -> 1m36s
rmmod dummy -> 0.4s
Benchmark after:
make-dummies 0 999 -> 0.63s
rmmod dummy -> 0.12s
make-dummies 0 9999 -> 2m35s
rmmod dummy -> 18s
The slowdown is caused by the lookups used in insert_headers
and put_links to see if we need to add links or remove links.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
When there are errors it is very nice to know the full sysctl path.
Add a simple function that computes the sysctl path and prints it
out.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Simplify the code and the sysctl semantics by autogenerating
sysctl directories when a sysctl table is registered that needs
the directories and autodeleting the directories when there are
no more sysctl tables registered that need them.
Autogenerating directories keeps sysctl tables from depending
on each other, removing all of the arcane register/unregister
ordering constraints and makes it impossible to get the order
wrong when reigsering and unregistering sysctl tables.
Autogenerating directories yields one unique entity that dentries
can point to, retaining the current effective use of the dcache.
Add struct ctl_dir as the type of these new autogenerated
directories.
The attached_by and attached_to fields in ctl_table_header are
removed as they are no longer needed.
The child field in ctl_table is no longer needed by the core of
the sysctl code. ctl_table.child can be removed once all of the
existing users have been updated.
Benchmark before:
make-dummies 0 999 -> 0.7s
rmmod dummy -> 0.07s
make-dummies 0 9999 -> 1m10s
rmmod dummy -> 0.4s
Benchmark after:
make-dummies 0 999 -> 0.44s
rmmod dummy -> 0.065s
make-dummies 0 9999 -> 1m36s
rmmod dummy -> 0.4s
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Add a ctl_table_root pointer to ctl_table set so it is easy to
go from a ctl_table_set to a ctl_table_root.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Replace sysctl_head_next with first_entry and next_entry. These new
iterators operate at the level of sysctl table entries and filter
out any sysctl tables that should not be shown.
Utilizing two specialized functions instead of a single function removes
conditionals for handling awkward special cases that only come up
at the beginning of iteration, making the iterators easier to read
and understand.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Replace the helpers that proc_sys_lookup uses with helpers that work
in terms of an entire sysctl directory. This is worse for sysctl_lock
hold times but it is much better for code clarity and the code cleanups
to come.
find_in_table is no longer needed so it is removed.
find_entry a general helper to find entries in a directory is added.
lookup_entry is a simple wrapper around find_entry that takes the
sysctl_lock increases the use count if an entry is found and drops
the sysctl_lock.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Every other directory has a .child member and we look at the .child
for our entries. Do the same for the root_table.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Add nreg to ctl_table_header. When nreg drops to 0 the ctl_table_header
will be unregistered.
Factor out drop_sysctl_table from unregister_sysctl_table, and add
the logic for decrementing nreg.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Instead of relying on sysct_head_next(NULL) to magically
return the right header for the root directory instead
explicitly transform NULL into the root directories header.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
While useful at one time for selinux and the sysctl sanity
checks those users no longer use the parent field and we can
safely remove it.
Inspired-by: Lucian Adrian Grijincu <lucian.grijincu@gmil.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
- Stop validating subdirectories now that we only register leaf tables
- Cleanup and improve the duplicate filename check.
* Run the duplicate filename check under the sysctl_lock to guarantee
we never add duplicate names.
* Reduce the duplicate filename check to nearly O(M*N) where M is the
number of entries in tthe table we are registering and N is the
number of entries in the directory before we got there.
- Move the duplicate filename check into it's own function and call
it directtly from __register_sysctl_table
- Kill the config option as the sanity checks are now cheap enough
the config option is unnecessary. The original reason for the config
option was because we had a huge table used to verify the proc filename
to binary sysctl mapping. That table has now evolved into the binary_sysctl
translation layer and is no longer part of the sysctl_check code.
- Tighten up the permission checks. Guarnateeing that files only have read
or write permissions.
- Removed redudant check for parents having a procname as now everything has
a procname.
- Generalize the backtrace logic so that we print a backtrace from
any failure of __register_sysctl_table that was not caused by
a memmory allocation failure. The backtrace allows us to track
down who erroneously registered a sysctl table.
Bechmark before (CONFIG_SYSCTL_CHECK=y):
make-dummies 0 999 -> 12s
rmmod dummy -> 0.08s
Bechmark before (CONFIG_SYSCTL_CHECK=n):
make-dummies 0 999 -> 0.7s
rmmod dummy -> 0.06s
make-dummies 0 99999 -> 1m13s
rmmod dummy -> 0.38s
Benchmark after:
make-dummies 0 999 -> 0.65s
rmmod dummy -> 0.055s
make-dummies 0 9999 -> 1m10s
rmmod dummy -> 0.39s
The sysctl sanity checks now impose no measurable cost.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Split the registration of a complex ctl_table array which may have
arbitrary numbers of directories (->child != NULL) and tables of files
into a series of simpler registrations that only register tables of files.
Graphically:
register('dir', { + file-a
+ file-b
+ subdir1
+ file-c
+ subdir2
+ file-d
+ file-e })
is transformed into:
wrapper->subheaders[0] = register('dir', {file1-a, file1-b})
wrapper->subheaders[1] = register('dir/subdir1', {file-c})
wrapper->subheaders[2] = register('dir/subdir2', {file-d, file-e})
return wrapper
This guarantees that __register_sysctl_table will only see a simple
ctl_table array with all entries having (->child == NULL).
Care was taken to pass the original simple ctl_table arrays to
__register_sysctl_table whenever possible.
This change is derived from a similar patch written
by Lucrian Grijincu.
Inspired-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
For any component of table passed to __register_sysctl_paths
that actually serves as a path, add that to the cstring path
that is passed to __register_sysctl_table.
The result is that for most calls to __register_sysctl_paths
we only pass a table to __register_sysctl_table that contains
no child directories.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Make __register_sysctl_table the core sysctl registration operation and
make it take a char * string as path.
Now that binary paths have been banished into the real of backwards
compatibility in kernel/binary_sysctl.c where they can be safely
ignored there is no longer a need to use struct ctl_path to represent
path names when registering ctl_tables.
Start the transition to using normal char * strings to represent
pathnames when registering sysctl tables. Normal strings are easier
to deal with both in the internal sysctl implementation and for
programmers registering sysctl tables.
__register_sysctl_paths is turned into a backwards compatibility wrapper
that converts a ctl_path array into a normal char * string.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Creating local copies of directory names is a good idea for
two reasons.
- The dynamic names used by callers must be copied into new
strings by the callers today to ensure the strings do not
change between register and unregister of the sysctl table.
- Sysctl directories have a potentially different lifetime
than the time between register and unregister of any
particular sysctl table.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
In sysctl_net register the two networking roots in the proper order.
In register_sysctl walk the sysctl sets in the reverse order of the
sysctl roots.
Remove parent from ctl_table_set and setup_sysctl_set as it is no
longer needed.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
This adds a small helper retire_sysctl_set to remove the intimate knowledge about
the how a sysctl_set is implemented from net/sysct_net.c
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
I goofed when I made sysctl directories have nlink == 0.
nlink == 0 means the directory has been deleted.
nlink == 1 meands a directory does not count subdirectories.
Use the default nlink == 1 for sysctl directories.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Move the core sysctl code from kernel/sysctl.c and kernel/sysctl_check.c
into fs/proc/proc_sysctl.c.
Currently sysctl maintenance is hampered by the sysctl implementation
being split across 3 files with artificial layering between them.
Consolidate the entire sysctl implementation into 1 file so that
it is easier to see what is going on and hopefully allowing for
simpler maintenance.
For functions that are now only used in fs/proc/proc_sysctl.c remove
their declarations from sysctl.h and make them static in fs/proc/proc_sysctl.c
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Simplify the code by treating the base sysctl table like any other
sysctl table and register it with register_sysctl_table.
To ensure this table is registered early enough to avoid problems
call sysctl_init from proc_sys_init.
Rename sysctl_net.c:sysctl_init() to net_sysctl_init() to avoid
name conflicts now that kernel/sysctl.c:sysctl_init() is no longer
static.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Remove checks for conditions that will never happen. If procname is NULL
the loop would already had bailed out, so there's no need to check it
again.
At the same time this also compacts the function find_in_table() by
refactoring it to be easier to read.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Says Andrew:
"60 patches. That's good enough for -rc1 I guess. I have quite a lot
of detritus to be rechecked, work through maintainers, etc.
- most of the remains of MM
- rtc
- various misc
- cgroups
- memcg
- cpusets
- procfs
- ipc
- rapidio
- sysctl
- pps
- w1
- drivers/misc
- aio"
* akpm: (60 commits)
memcg: replace ss->id_lock with a rwlock
aio: allocate kiocbs in batches
drivers/misc/vmw_balloon.c: fix typo in code comment
drivers/misc/vmw_balloon.c: determine page allocation flag can_sleep outside loop
w1: disable irqs in critical section
drivers/w1/w1_int.c: multiple masters used same init_name
drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal
drivers/power/ds2780_battery.c: add a nolock function to w1 interface
drivers/power/ds2780_battery.c: create central point for calling w1 interface
w1: ds2760 and ds2780, use ida for id and ida_simple_get() to get it
pps gpio client: add missing dependency
pps: new client driver using GPIO
pps: default echo function
include/linux/dma-mapping.h: add dma_zalloc_coherent()
sysctl: make CONFIG_SYSCTL_SYSCALL default to n
sysctl: add support for poll()
RapidIO: documentation update
drivers/net/rionet.c: fix ethernet address macros for LE platforms
RapidIO: fix potential null deref in rio_setup_device()
RapidIO: add mport driver for Tsi721 bridge
...
Adding support for poll() in sysctl fs allows userspace to receive
notifications of changes in sysctl entries. This adds a infrastructure to
allow files in sysctl fs to be pollable and implements it for hostname and
domainname.
[akpm@linux-foundation.org: s/declare/define/ for definitions]
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Greg KH <gregkh@suse.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On reading sysctl dirs we should return -EISDIR instead of -EINVAL.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace direct i_nlink updates with the respective updater function
(inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count).
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
nothing blocking there, since all instances of sysctl
->permissions() method are non-blocking - both of them,
that is.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
a) struct inode is not going to be freed under ->d_compare();
however, the thing PROC_I(inode)->sysctl points to just might.
Fortunately, it's enough to make freeing that sucker delayed,
provided that we don't step on its ->unregistering, clear
the pointer to it in PROC_I(inode) before dropping the reference
and check if it's NULL in ->d_compare().
b) I'm not sure that we *can* walk into NULL inode here (we recheck
dentry->seq between verifying that it's still hashed / fetching
dentry->d_inode and passing it to ->d_compare() and there's no
negative hashed dentries in /proc/sys/*), but if we can walk into
that, we really should not have ->d_compare() return 0 on it!
Said that, I really suspect that this check can be simply killed.
Nick?
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This fixes an old (2007) selinux regression: filesystem labeling for
/proc/sys returned
-r--r--r-- unknown /proc/sys/fs/file-nr
instead of
-r--r--r-- system_u:object_r:sysctl_fs_t:s0 /proc/sys/fs/file-nr
Events that lead to breaking of /proc/sys/ selinux labeling:
1) sysctl was reimplemented to route all calls through /proc/sys/
commit 77b14db502
[PATCH] sysctl: reimplement the sysctl proc support
2) proc_dir_entry was removed from ctl_table:
commit 3fbfa98112
[PATCH] sysctl: remove the proc_dir_entry member for the sysctl tables
3) selinux still walked the proc_dir_entry tree to apply
labeling. Because ctl_tables don't have a proc_dir_entry, we did
not label /proc/sys/ inodes any more. To achieve this the /proc/sys/
inodes were marked private and private inodes were ignored by
selinux.
commit bbaca6c2e7
[PATCH] selinux: enhance selinux to always ignore private inodes
commit 86a71dbd3e
[PATCH] sysctl: hide the sysctl proc inodes from selinux
Access control checks have been done by means of a special sysctl hook
that was called for read/write accesses to any /proc/sys/ entry.
We don't have to do this because, instead of walking the
proc_dir_entry tree we can walk the dentry tree (as done in this
patch). With this patch:
* we don't mark /proc/sys/ inodes as private
* we don't need the sysclt security hook
* we walk the dentry tree to find the path to the inode.
We have to strip the PID in /proc/PID/ entries that have a
proc_dir_entry because selinux does not know how to label paths like
'/1/net/rpc/nfsd.fh' (and defaults to 'proc_t' labeling). Selinux does
know of '/net/rpc/nfsd.fh' (and applies the 'sysctl_rpc_t' label).
PID stripping from the path was done implicitly in the previous code
because the proc_dir_entry tree had the root in '/net' in the example
from above. The dentry tree has the root in '/1'.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Require filesystems be aware of .d_revalidate being called in rcu-walk
mode (nd->flags & LOOKUP_RCU). For now do a simple push down, returning
-ECHILD from all implementations.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Reduce some branches and memory accesses in dcache lookup by adding dentry
flags to indicate common d_ops are set, rather than having to check them.
This saves a pointer memory access (dentry->d_op) in common path lookup
situations, and saves another pointer load and branch in cases where we
have d_op but not the particular operation.
Patched with:
git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Perform common cases of path lookups without any stores or locking in the
ancestor dentry elements. This is called rcu-walk, as opposed to the current
algorithm which is a refcount based walk, or ref-walk.
This results in far fewer atomic operations on every path element,
significantly improving path lookup performance. It also avoids cacheline
bouncing on common dentries, significantly improving scalability.
The overall design is like this:
* LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk.
* Take the RCU lock for the entire path walk, starting with the acquiring
of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are
not required for dentry persistence.
* synchronize_rcu is called when unregistering a filesystem, so we can
access d_ops and i_ops during rcu-walk.
* Similarly take the vfsmount lock for the entire path walk. So now mnt
refcounts are not required for persistence. Also we are free to perform mount
lookups, and to assume dentry mount points and mount roots are stable up and
down the path.
* Have a per-dentry seqlock to protect the dentry name, parent, and inode,
so we can load this tuple atomically, and also check whether any of its
members have changed.
* Dentry lookups (based on parent, candidate string tuple) recheck the parent
sequence after the child is found in case anything changed in the parent
during the path walk.
* inode is also RCU protected so we can load d_inode and use the inode for
limited things.
* i_mode, i_uid, i_gid can be tested for exec permissions during path walk.
* i_op can be loaded.
When we reach the destination dentry, we lock it, recheck lookup sequence,
and increment its refcount and mountpoint refcount. RCU and vfsmount locks
are dropped. This is termed "dropping rcu-walk". If the dentry refcount does
not match, we can not drop rcu-walk gracefully at the current point in the
lokup, so instead return -ECHILD (for want of a better errno). This signals the
path walking code to re-do the entire lookup with a ref-walk.
Aside from the final dentry, there are other situations that may be encounted
where we cannot continue rcu-walk. In that case, we drop rcu-walk (ie. take
a reference on the last good dentry) and continue with a ref-walk. Again, if
we can drop rcu-walk gracefully, we return -ECHILD and do the whole lookup
using ref-walk. But it is very important that we can continue with ref-walk
for most cases, particularly to avoid the overhead of double lookups, and to
gain the scalability advantages on common path elements (like cwd and root).
The cases where rcu-walk cannot continue are:
* NULL dentry (ie. any uncached path element)
* parent with d_inode->i_op->permission or ACLs
* dentries with d_revalidate
* Following links
In future patches, permission checks and d_revalidate become rcu-walk aware. It
may be possible eventually to make following links rcu-walk aware.
Uncached path elements will always require dropping to ref-walk mode, at the
very least because i_mutex needs to be grabbed, and objects allocated.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Change d_compare so it may be called from lock-free RCU lookups. This
does put significant restrictions on what may be done from the callback,
however there don't seem to have been any problems with in-tree fses.
If some strange use case pops up that _really_ cannot cope with the
rcu-walk rules, we can just add new rcu-unaware callbacks, which would
cause name lookup to drop out of rcu-walk mode.
For in-tree filesystems, this is just a mechanical change.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Change d_delete from a dentry deletion notification to a dentry caching
advise, more like ->drop_inode. Require it to be constant and idempotent,
and not take d_lock. This is how all existing filesystems use the callback
anyway.
This makes fine grained dentry locking of dput and dentry lru scanning
much simpler.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Instead of always assigning an increasing inode number in new_inode
move the call to assign it into those callers that actually need it.
For now callers that need it is estimated conservatively, that is
the call is added to all filesystems that do not assign an i_ino
by themselves. For a few more filesystems we can avoid assigning
any inode number given that they aren't user visible, and for others
it could be done lazily when an inode number is actually needed,
but that's left for later patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Replace inode_setattr with opencoded variants of it in all callers. This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.
In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:
spufs: explicitly checks for ATTR_SIZE earlier
btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above
In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The ctl_name and strategy fields are unused, now that sys_sysctl
is a compatibility wrapper around /proc/sys. No longer looking
at them in the generic code is effectively what we are doing
now and provides the guarantee that during further cleanups
we can just remove references to those fields and everything
will work ok.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
It's unused.
It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.
It _was_ used in two places at arch/frv for some reason.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
... and don't bother in callers. Don't bother with zeroing i_blocks,
while we are at it - it's already been zeroed.
i_mode is not worth the effort; it has no common default value.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Eric W. Biederman