Oded writes:
The following bug fixes are included in this tag:
- Fix host crash upon resume after suspend
- Fix MMU related bugs which result in user's jobs getting stuck
- Fix race between user context cleanup and hard-reset which results in
host crash
- Fix sparse warning
* tag 'misc-habanalabs-fixes-2019-03-26' of git://people.freedesktop.org/~gabbayo/linux: (265 commits)
habanalabs: cast to expected type
habanalabs: prevent host crash during suspend/resume
habanalabs: perform accounting for active CS
habanalabs: fix mapping with page size bigger than 4KB
habanalabs: complete user context cleanup before hard reset
habanalabs: fix bug when mapping very large memory area
habanalabs: fix MMU number of pages calculation
Linux 5.1-rc2
clocksource/drivers/clps711x: Remove board support
ext4: prohibit fstrim in norecovery mode
ext4: cleanup bh release code in ext4_ind_remove_space()
ext4: brelse all indirect buffer in ext4_ind_remove_space()
genirq: Mark expected switch case fall-through
clocksource/drivers/riscv: Fix clocksource mask
x86/gart: Exclude GART aperture from kcore
cifs: update internal module version number
SMB3: Fix SMB3.1.1 guest mounts to Samba
cifs: Fix slab-out-of-bounds when tracing SMB tcon
cifs: allow guest mounts to work for smb3.11
fix incorrect error code mapping for OBJECTID_NOT_FOUND
...
When EXTCON is a loadable module, mtu3 fails to link as built-in:
drivers/usb/mtu3/mtu3_plat.o: In function `mtu3_probe':
mtu3_plat.c:(.text+0x690): undefined reference to `extcon_get_edev_by_phandle'
Add a Kconfig dependency to force mtu3 also to be a loadable module
if extconn is, but still allow it to be built without extcon.
Fixes: d0ed062a8b ("usb: mtu3: dual-role mode support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_match_device in usb251xb_probe can fail and returns a NULL pointer.
The patch avoids a potential NULL pointer dereference in this scenario.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some PHYs do not support PHY_MODE_USB_HOST_SS, i.e. USB 3.0 or higher.
Fall back and try the more generic PHY_MODE_USB_HOST if it fails.
Fixes: b97a313483 ("usb: core: comply to PHY framework")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While only the first PHY supports mode switching, the remaining PHYs
work in USB host mode. They should support set_mode with mode=USB_HOST
instead of failing. This is especially needed now that the USB core does
set_mode for all USB ports, which was added in commit b97a313483 ("usb:
core: comply to PHY framework").
Make set_mode with mode=USB_HOST a no-op instead of failing for the
non-OTG USB PHYs.
Fixes: 6ba43c2919 ("phy-sun4i-usb: Add support for phy_set_mode")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL
pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are a few windows during AER/EEH when we can access PCIe I/O mapped
registers. This will harden the access to insure we do not allow PCIe
access during errors
Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Sagar Biradar <sagar.biradar@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During expander reset handling, the driver invokes kernel function
scsi_host_find_tag() to obtain outstanding requests associated with the
scsi host managed by the driver. Driver loops from tag value zero to hba
queue depth to obtain the outstanding scmds. But when blk-mq is enabled,
the block layer may return stale entry for one or more requests. This may
lead to kernel panic if the returned value is inaccessible or the memory
pointed by the returned value is reused.
Reference of upstream discussion:
https://patchwork.kernel.org/patch/10734933/
Instead of calling scsi_host_find_tag() API for each and every smid (smid
is tag +1) from one to shost->can_queue, now driver will call this API (to
obtain the outstanding scmd) only for those smid's which are outstanding at
the driver level.
Driver will determine whether this smid is outstanding at driver level by
looking into it's corresponding MPI request frame, if its MPI request frame
is empty, then it means that this smid is free and does not need to call
scsi_host_find_tag() for it. By doing this, driver will invoke
scsi_host_find_tag() for only those tags which are outstanding at the
driver level.
Driver will check whether particular MPI request frame is empty or not by
looking into the "DevHandle" field. If this field is zero then it means
that this MPI request is empty. For active MPI request DevHandle must be
non-zero.
Also driver will memset the MPI request frame once the corresponding scmd
is processed (i.e. just before calling
scmd->done function).
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
So far we effectively clear the BMCR register. Some PHY's can deal
with this (e.g. because they reset BMCR to a default as part of a
soft-reset) whilst on others this causes issues because e.g. the
autoneg bit is cleared. Marvell is an example, see also thread [0].
So let's be a little bit more gentle and leave all bits we're not
interested in as-is. This change is needed for PHY drivers to
properly deal with the original patch.
[0] https://marc.info/?t=155264050700001&r=1&w=2
Fixes: 6e2d85ec05 ("net: phy: Stop with excessive soft reset")
Tested-by: Phil Reid <preid@electromag.com.au>
Tested-by: liweihang <liweihang@hisilicon.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a multi-function device's bandwidth is already limited when it is
enumerated, a message is logged only for function 0. By contrast, when
downtraining occurs after enumeration, a message is logged for all
functions. That's because the former uses pcie_report_downtraining(),
whereas the latter uses __pcie_print_link_status() (which doesn't filter
functions != 0). I am seeing this happen on a MacBookPro9,1 with a GPU
(function 0) and an integrated HDA controller (function 1).
Avoid this incongruence by calling pcie_report_downtraining() in both
cases.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexandru Gagniuc <alex.gagniuc@dellteam.com>
When booting a MacBookPro9,1, duplicate link downtraining messages are
logged for the devices directly attached to the two CPU-internal Root Ports
of the Core i7 3615QM: Once on device enumeration and once on enablement
of the bandwidth notification interrupt on the Root Ports.
Duplicate messages do not occur with Root Ports on the PCH and Downstream
Ports on the Thunderbolt controller: Only a single message is logged for
these, namely on device enumeration.
The reason for the duplicate messages is a stale interrupt in the Link
Status register of the 3615QM's internal Root Ports. Avoid by clearing the
interrupt before enabling it.
An alternative approach would be to clear the interrupt already on device
enumeration or to report link downtraining only if the speed has changed.
That way, link downtraining occurring between device enumeration and
enablement of the bandwidth notification interrupt could be caught.
However clearing stale interrupts before enabling them is a standard
operating procedure for any driver and keeping the two steps in one place
makes the code easier to follow.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexandru Gagniuc <alex.gagniuc@dellteam.com>
A threaded IRQ with a NULL handler does not work with level-triggered
interrupts. request_threaded_irq() will return an error:
genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq 16
pcie_bw_notification: probe of 0000:00:1b.0:pcie010 failed with error -22
For level interrupts we need to silence the interrupt before exiting the
IRQ handler, so just clear the PCI_EXP_LNKSTA_LBMS bit there.
Fixes: e8303bb7a7 ("PCI/LINK: Report degraded links via link bandwidth notification")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The ACPI specification states that if the "Guaranteed Performance
Register" is not implemented, the OSPM assumes guaranteed performance
to always be equal to nominal performance.
So for invalid or unimplemented guaranteed performance register, use
nominal performance as guaranteed performance.
This change will fall back to nominal_perf when guranteed_perf is
invalid. If nominal_perf is also invalid or not present, fall back
to the existing implementation, which is to read from HWP Capabilities
MSR.
Fixes: 86d333a8cc ("cpufreq: intel_pstate: Add base_frequency attribute")
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As per the ACPI specification, "Guaranteed Performance Register" is
a "Buffer" field and it cannot be "Integer", so treat the "Integer"
type for "Guaranteed Performance Register" field as invalid and
ignore its value in that case.
Also save one cpc_read() call when "Guaranteed Performance Register"
is not present, which means a register defined as:
"Register(SystemMemory, 0, 0, 0, 0)".
Fixes: 29523f0953 ("ACPI / CPPC: Add support for guaranteed performance")
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit 1aec421120.
Steven Rostedt reports that it causes a hang at bootup and bisected it
to this commit.
The troigger is apparently a module alias for "parport_lowlevel" that
points to "parport_pc", which causes a hang with
modprobe -q -- parport_lowlevel
blocking forever with a backtrace like this:
wait_for_completion_killable+0x1c/0x28
call_usermodehelper_exec+0xa7/0x108
__request_module+0x351/0x3d8
get_lowlevel_driver+0x28/0x41 [parport]
__parport_register_driver+0x39/0x1f4 [parport]
daisy_drv_init+0x31/0x4f [parport]
parport_bus_init+0x5d/0x7b [parport]
parport_default_proc_register+0x26/0x1000 [parport]
do_one_initcall+0xc2/0x1e0
do_init_module+0x50/0x1d4
load_module+0x1c2e/0x21b3
sys_init_module+0xef/0x117
Supid says:
"Due to the new device model daisy driver will now try to find the
parallel ports while trying to register its driver so that it can bind
with them. Now, since daisy driver is loaded while parport bus is
initialising the list of parport is still empty and it tries to load
the lowlevel driver, which has an alias set to parport_pc, now causes
a deadlock"
But I don't think the daisy driver should be loaded by the parport
initialization in the first place, so let's revert the whole change.
If the daisy driver can just initialize separately on its own (like a
driver should), instead of hooking into the parport init sequence
directly, this issue probably would go away.
Reported-and-bisected-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A bvec can now consist of multiple physically contiguous pages.
This means that bvec_iter_advance() can move to a different page while
staying in the same bvec (i.e. ->bi_bvec_done != 0).
The messenger works in terms of segments which can now be defined as
the smaller of a bvec and a page. The "more bytes to process in this
segment" condition holds only if bvec_iter_advance() leaves us in the
same bvec _and_ in the same page. On next bvec (possibly in the same
page) and on next page (possibly in the same bvec) we may need to set
->last_piece.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When connecting PHY, we set the mode to PHY_INTERFACE_MODE_GMII which is
not always correct. Specifically on boards where RGMII_RXID is needed
networking now longer works with at803x after commit 6d4cd041f0
("net: phy: at803x: disable delay only for RGMII mode").
Fix by passing the correct mode. Tested on EdgeRouter Lite
(RGMII_RXID, at803x PHY) and D-Link DSR-500N (RGMII, broadcom PHY).
Fixes: 6d4cd041f0 ("net: phy: at803x: disable delay only for RGMII mode")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to set "err" on this error path.
Fixes: 187ac53e59 ("staging: vchiq_arm: rework probe and init functions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Complete read error handling paths for all three kinds of
compressed pages:
1) For cache-managed pages, PG_uptodate will be checked since
read_endio will unlock and SetPageUptodate for these pages;
2) For inplaced pages, read_endio cannot SetPageUptodate directly
since it should be used to mark the final decompressed data,
PG_error will be set with page locked for IO error instead;
3) For staging pages, PG_error is used, which is similar to
what we do for inplaced pages.
Fixes: 3883a79abd ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It appears on some slower systems that the driver can find its way
out of the workqueue while the interrupt is disabled by continuous polling
by it.
Move MACvIntEnable to vnt_interrupt_work so that it is always enabled
on all routes out of vnt_interrupt_process.
Move MACvIntDisable so that the device doesn't keep polling the system
while the workqueue is being processed.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
CC: stable@vger.kernel.org # v4.2+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix the DMT TDMS clock filtering on meson
- Fix an issue with NV12 buffers on rockchip when scaling is active
- Fix a couple of use-after-free
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXJixJAAKCRDj7w1vZxhR
xTmiAQCVzG4gSQLsB0qHBA5FpvzMTgeVAYZkKYV4A2X0mLgkjAEAwsSspEBCAKyw
zlE88ohe+2QQzmxuib7JoPLFD1In4wo=
=ozhR
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-03-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- A bunch of fixes to cleanup path in meson
- Fix the DMT TDMS clock filtering on meson
- Fix an issue with NV12 buffers on rockchip when scaling is active
- Fix a couple of use-after-free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190325104523.obnfelgvaglyhe5e@flea
In case of direct write -EAGAIN will be returned if page cache was
previously populated. To avoid immediate completion of a request
with -EAGAIN error write has to be offloaded to the async worker,
like io_read() does.
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We now wrap sbitmap waitqueues in an active counter, so we can avoid
iterating wakeups unless we have waiters there. This works as long as
everyone that's manipulating the waitqueues use the proper helpers. For
the tag wait case for shared tags, however, we add ourselves to the
waitqueue without incrementing/decrementing the ->ws_active count. This
means that wakeups can take a long time to happen.
Fix this by manually doing the inc/dec as needed for the wait queue
handling.
Reported-by: Michael Leun <kbug@newton.leun.net>
Tested-by: Michael Leun <kbug@newton.leun.net>
Cc: stable@vger.kernel.org
Reviewed-by: Omar Sandoval <osandov@fb.com>
Fixes: 5d2ee7122c ("sbitmap: optimize wakeup check")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 906b40b246 ("dmaengine: stm32-mdma: Add a check on
read_u32_array")
As stated by bindings "st,ahb-addr-masks" is optional.
The statement inserted by this commit makes this property
mandatory and prevents MDMA to be probed in case property not present.
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression
that is causing accesses to the file-system on the eMMC to fail. Errors
such as the following have been observed ...
mmc2: running CQE recovery
mmc2: mmc_select_hs400 failed, error -110
print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700
mmc2: cqhci: CQE failed to exit halt state
For now disable CQE support for Tegra186 until this issue is resolved.
Fixes: dfd3cb6feb arm64: tegra: Add CQE Support for SDMMC4
Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Correct phy mode setting of imx6dl-yapp4 board to fix a problem
caused by commit 5ecdd77c61 ("net: dsa: qca8k: disable delay
for RGMII mode").
- Add a missing of_node_put call to fix leaked reference detected by
coccinelle in imx51 machine code.
- Fix imx6q cpuidle driver bug which causes that CPU might not wake up
at expected time.
- Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix
transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
- Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h.
- Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi.
- Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
- Update PWM driver options in imx defconfig files due to the change
on driver part.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJclKQNAAoJEFBXWFqHsHzOSugIAJGMo/4tEOijA6oysBhzwE3A
xy7nHp92RxAZEImjE14NRNgyS6zTZd51PWn3CQjjtw+x+6OBsk4kI+ftQvxp1irg
7ag6uvjZ5lPaW04tF6bUbI9vZd9+Fsy1z7D/hTzsPPj7w7iH+2rMgWsNwma/ZZ9r
UFmSfkgxE1kj8sHsnm3EoryKLeu69gD1p+chsWwe4/zxeo+yDeOQuXc1fc05HN5Y
JOPvHk8PWPDNHwhu8XX20aPGGZpjxi75uhwGDbIQnVCp/k4fDZyDxKfNKcZSrFbK
JsDxGRIRYd+TXM/E/UJ1TdXsmP6pUoyMXVJi3+0nk0QqLnQqjkdTP2O9MRt+Qng=
=jCPr
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.1:
- Correct phy mode setting of imx6dl-yapp4 board to fix a problem
caused by commit 5ecdd77c61 ("net: dsa: qca8k: disable delay
for RGMII mode").
- Add a missing of_node_put call to fix leaked reference detected by
coccinelle in imx51 machine code.
- Fix imx6q cpuidle driver bug which causes that CPU might not wake up
at expected time.
- Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix
transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
- Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h.
- Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi.
- Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
- Update PWM driver options in imx defconfig files due to the change
on driver part.
* tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v4_v5_defconfig: enable PWM driver
ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
ARM: dts: pfla02: increase phy reset duration
ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
ARM: imx51: fix a leaked reference by adding missing of_node_put
ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
On big-endian architectures, the signal masks are differnet
between 32-bit and 64-bit tasks, so we have to use a different
function for reading them from user space.
io_cqring_wait() initially got this wrong, and always interprets
this as a native structure. This is ok on x86 and most arm64,
but not on s390, ppc64be, mips64be, sparc64 and parisc.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
please pull the following:
- Eric provides fixes for the bcm2835-pm driver: added missing depends
on MFD_CORE for the ARM64 definition of ARCH_BCM2835, fixing error
paths on initialization and fixing the PM_IMAGE_PERI power domain
-----BEGIN PGP SIGNATURE-----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=0kxj
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM/ARM64-based SoCs fixes for 5.1,
please pull the following:
- Eric provides fixes for the bcm2835-pm driver: added missing depends
on MFD_CORE for the ARM64 definition of ARCH_BCM2835, fixing error
paths on initialization and fixing the PM_IMAGE_PERI power domain
* tag 'arm-soc/for-5.1/soc-fixes' of https://github.com/Broadcom/stblinux:
arm64: bcm2835: Add missing dependency on MFD_CORE.
soc: bcm: bcm2835-pm: Fix error paths of initialization.
soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
5.1, please pull the following:
- Helen fixes the HDMI hot-pug detect GPIO polarity for the Rasperry Pi
model B revision 2
-----BEGIN PGP SIGNATURE-----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=XW7G
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.1, please pull the following:
- Helen fixes the HDMI hot-pug detect GPIO polarity for the Rasperry Pi
model B revision 2
* tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Fix hdmi hpd gpio pull
The SPI DT bindings are for historical reasons a pitfall,
the ability to flag a GPIO line as active high/low with
the second cell flags was introduced later so the SPI
subsystem will only accept the bool flag spi-cs-high
to indicate that the line is active high.
It worked by mistake, but the mistake was corrected
in another commit.
The comment in the DTS file was also misleading: this
CS is indeed active high.
Fixes: cffbb02daf ("ARM: dts: nomadik: Augment NHK15 panel setting")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
allnoconfig build with just ARCH_DAVINCI enabled
fails because drivers/clk/davinci/* depends on
REGMAP being enabled.
Fix it by selecting REGMAP_MMIO when building in
DaVinci support.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently PCM core sets each opened stream forcibly to SUSPENDED state
via snd_pcm_suspend_all() call, and the user-space is responsible for
re-triggering the resume manually either via snd_pcm_resume() or
prepare call. The scheme works fine usually, but there are corner
cases where the stream can't be resumed by that call: the streams
still in OPEN state before finishing hw_params. When they are
suspended, user-space cannot perform resume or prepare because they
haven't been set up yet. The only possible recovery is to re-open the
device, which isn't nice at all. Similarly, when a stream is in
DISCONNECTED state, it makes no sense to change it to SUSPENDED
state. Ditto for in SETUP state; which you can re-prepare directly.
So, this patch addresses these issues by filtering the PCM streams to
be suspended by checking the PCM state. When a stream is in either
OPEN, SETUP or DISCONNECTED as well as already SUSPENDED, the suspend
action is skipped.
To be noted, this problem was originally reported for the PCM runtime
PM on HD-audio. And, the runtime PM problem itself was already
addressed (although not intended) by the code refactoring commits
3d21ef0b49 ("ALSA: pcm: Suspend streams globally via device type PM
ops") and 17bc4815de ("ALSA: pci: Remove superfluous
snd_pcm_suspend*() calls"). These commits eliminated the
snd_pcm_suspend*() calls from the runtime PM suspend callback code
path, hence the racy OPEN state won't appear while runtime PM.
(FWIW, the race window is between snd_pcm_open_substream() and the
first power up in azx_pcm_open().)
Although the runtime PM issue was already "fixed", the same problem is
still present for the system PM, hence this patch is still needed.
And for stable trees, this patch alone should suffice for fixing the
runtime PM problem, too.
Reported-and-tested-by: Jon Hunter <jonathanh@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The xfs fstrim implementation uses the free space btrees to find free
space that can be discarded. If we haven't recovered the log, the bnobt
will be stale and we absolutely *cannot* use stale metadata to zap the
underlying storage.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Print the warning about the fall-back to IOMMU_DOMAIN_DMA in
iommu_group_get_for_dev() only when such a domain was
actually allocated.
Otherwise the user will get misleading warnings in the
kernel log when the iommu driver used doesn't support
IOMMU_DOMAIN_DMA and IOMMU_DOMAIN_IDENTITY.
Fixes: fccb4e3b8a ('iommu: Allow default domain type to be set on the kernel command line')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Andreas reported that he was seeing the tdbtorture test fail in some
cases with -EDEADLCK when it wasn't before. Some debugging showed that
deadlock detection was sometimes discovering the caller's lock request
itself in a dependency chain.
While we remove the request from the blocked_lock_hash prior to
reattempting to acquire it, any locks that are blocked on that request
will still be present in the hash and will still have their fl_blocker
pointer set to the current request.
This causes posix_locks_deadlock to find a deadlock dependency chain
when it shouldn't, as a lock request cannot block itself.
We are going to end up waking all of those blocked locks anyway when we
go to reinsert the request back into the blocked_lock_hash, so just do
it prior to checking for deadlocks. This ensures that any lock blocked
on the current request will no longer be part of any blocked request
chain.
URL: https://bugzilla.kernel.org/show_bug.cgi?id=202975
Fixes: 5946c4319e ("fs/locks: allow a lock request to block other requests.")
Cc: stable@vger.kernel.org
Reported-by: Andreas Schneider <asn@redhat.com>
Signed-off-by: Neil Brown <neilb@suse.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Chandan reported that fstests' generic/026 test hit a crash:
BUG: Unable to handle kernel data access at 0xc00000062ac40000
Faulting instruction address: 0xc000000000092240
Oops: Kernel access of bad area, sig: 11 [#1]
LE SMP NR_CPUS=2048 DEBUG_PAGEALLOC NUMA pSeries
CPU: 0 PID: 27828 Comm: chacl Not tainted 5.0.0-rc2-next-20190115-00001-g6de6dba64dda #1
NIP: c000000000092240 LR: c00000000066a55c CTR: 0000000000000000
REGS: c00000062c0c3430 TRAP: 0300 Not tainted (5.0.0-rc2-next-20190115-00001-g6de6dba64dda)
MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 44000842 XER: 20000000
CFAR: 00007fff7f3108ac DAR: c00000062ac40000 DSISR: 40000000 IRQMASK: 0
GPR00: 0000000000000000 c00000062c0c36c0 c0000000017f4c00 c00000000121a660
GPR04: c00000062ac3fff9 0000000000000004 0000000000000020 00000000275b19c4
GPR08: 000000000000000c 46494c4500000000 5347495f41434c5f c0000000026073a0
GPR12: 0000000000000000 c0000000027a0000 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: c00000062ea70020 c00000062c0c38d0 0000000000000002 0000000000000002
GPR24: c00000062ac3ffe8 00000000275b19c4 0000000000000001 c00000062ac30000
GPR28: c00000062c0c38d0 c00000062ac30050 c00000062ac30058 0000000000000000
NIP memcmp+0x120/0x690
LR xfs_attr3_leaf_lookup_int+0x53c/0x5b0
Call Trace:
xfs_attr3_leaf_lookup_int+0x78/0x5b0 (unreliable)
xfs_da3_node_lookup_int+0x32c/0x5a0
xfs_attr_node_addname+0x170/0x6b0
xfs_attr_set+0x2ac/0x340
__xfs_set_acl+0xf0/0x230
xfs_set_acl+0xd0/0x160
set_posix_acl+0xc0/0x130
posix_acl_xattr_set+0x68/0x110
__vfs_setxattr+0xa4/0x110
__vfs_setxattr_noperm+0xac/0x240
vfs_setxattr+0x128/0x130
setxattr+0x248/0x600
path_setxattr+0x108/0x120
sys_setxattr+0x28/0x40
system_call+0x5c/0x70
Instruction dump:
7d201c28 7d402428 7c295040 38630008 38840008 408201f0 4200ffe8 2c050000
4182ff6c 20c50008 54c61838 7d201c28 <7d402428> 7d293436 7d4a3436 7c295040
The instruction dump decodes as:
subfic r6,r5,8
rlwinm r6,r6,3,0,28
ldbrx r9,0,r3
ldbrx r10,0,r4 <-
Which shows us doing an 8 byte load from c00000062ac3fff9, which
crosses the page boundary at c00000062ac40000 and faults.
It's not OK for memcmp to read past the end of the source or
destination buffers if that would cross a page boundary, because we
don't know that the next page is mapped.
As pointed out by Segher, we can read past the end of the source or
destination as long as we don't cross a 4K boundary, because that's
our minimum page size on all platforms.
The bug is in the code at the .Lcmp_rest_lt8bytes label. When we get
there we know that s1 is 8-byte aligned and we have at least 1 byte to
read, so a single 8-byte load won't read past the end of s1 and cross
a page boundary.
But we have to be more careful with s2. So check if it's within 8
bytes of a 4K boundary and if so go to the byte-by-byte loop.
Fixes: 2d9ee327ad ("powerpc/64: Align bytes before fall back to .Lshort in powerpc64 memcmp()")
Cc: stable@vger.kernel.org # v4.19+
Reported-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Tested-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
DMT monitors does not necessarely report a maximum TMDS clock
in a VSDB EDID extension.
In this case, all modes are wrongly rejected, including
the DRM fallback EDID.
This patch only rejects modes whith clock > max_tmds_clock if
the max_tmds_clock is specified. This will only reject
4:2:0 HDMI2.0 modes, who reports a clock > max_tmds_clock.
Reported-by: Maxime Jourdan <mjourdan@baylibre.com>
Fixes: d7d8fb7046 ("drm/meson: add HDMI div40 TMDS mode")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320081110.1718-1-narmstrong@baylibre.com
meson_drv_unbind() doesn't unregister the IRQ handler, which can lead to
use-after-free if the IRQ fires after unbind:
[ 64.656876] Unable to handle kernel paging request at virtual address ffff000011706dbc
...
[ 64.662001] pc : meson_irq+0x18/0x30 [meson_drm]
I'm assuming that a similar problem could happen on the error path of
bind(), so uninstall the IRQ handler there as well.
Fixes: bbbe775ec5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322152657.13752-2-jean-philippe.brucker@arm.com
meson_drv_bind() registers a meson_drm struct as the device's privdata,
but meson_drv_unbind() tries to retrieve a drm_device. This may cause a
segfault on shutdown:
[ 5194.593429] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000197
...
[ 5194.788850] Call trace:
[ 5194.791349] drm_dev_unregister+0x1c/0x118 [drm]
[ 5194.795848] meson_drv_unbind+0x50/0x78 [meson_drm]
Retrieve the right pointer in meson_drv_unbind().
Fixes: bbbe775ec5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322152657.13752-1-jean-philippe.brucker@arm.com
Rather than setting debug output flags during early init, its makes
more sense to simply re-define ACPI_DEBUG_DEFAULT specifically for
Linux.
ACPICA commit 60903715711f4b00ca1831779a8a23279a66497d
Link: https://github.com/acpica/acpica/commit/60903715
Fixes: ce5cbf5349 ("ACPI: Set debug output flags independent of ACPICA")
Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In case devm_kzalloc, the patch returns ENOMEM to avoid potential
NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Now drm/udl driver uses drm_do_get_edid() function to retrieve and
validate all blocks of EDID data. Old approach had insufficient
validation routine and had problems with retrieving of extra blocks
Signed-off-by: Robert Tarasov <tutankhamen@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: Fix spelling mistakes]
Link: https://patchwork.freedesktop.org/patch/msgid/20190314225339.162386-1-tutankhamen@chromium.org
If userspace has open fd(s) when drm_dev_unplug() is run, it will result
in drm_dev_unregister() being called twice. First in drm_dev_unplug() and
then later in drm_release() through the call to drm_put_dev().
Since userspace already holds a ref on drm_device through the drm_minor,
it's not necessary to add extra ref counting based on no open file
handles. Instead just drm_dev_put() unconditionally in drm_dev_unplug().
We now have this:
- Userpace holds a ref on drm_device as long as there's open fd(s)
- The driver holds a ref on drm_device as long as it's bound to the
struct device
When both sides are done with drm_device, it is released.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208140103.28919-2-noralf@tronnes.org
Alexei Starovoitov says:
====================
pull-request: bpf 2019-03-24
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) libbpf verision fix up from Daniel.
2) fix liveness propagation from Jakub.
3) fix verbose print of refcounted regs from Martin.
4) fix for large map allocations from Martynas.
5) fix use after free in sanitize_ptr_alu from Xu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
First one is fixing version in Makefile and shared object and
second one clarifies bump in version. Thanks!
v1 -> v2:
- Fix up soname, thanks Stanislav!
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current documentation suggests that we would need to bump the
libbpf version on every change. Lets clarify this a bit more and
reflect what we do today in practice, that is, bumping it once per
development cycle.
Fixes: 76d1b894c5 ("libbpf: Document API and ABI conventions")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Even though libbpf's versioning script for the linker (libbpf.map)
is pointing to 0.0.2, the BPF_EXTRAVERSION in the Makefile has
not been updated along with it and is therefore still on 0.0.1.
While fixing up, I also noticed that the generated shared object
versioning information is missing, typical convention is to have
a linker name (libbpf.so), soname (libbpf.so.0) and real name
(libbpf.so.0.0.2) for library management. This is based upon the
LIBBPF_VERSION as well.
The build will then produce the following bpf libraries:
# ll libbpf*
libbpf.a
libbpf.so -> libbpf.so.0.0.2
libbpf.so.0 -> libbpf.so.0.0.2
libbpf.so.0.0.2
# readelf -d libbpf.so.0.0.2 | grep SONAME
0x000000000000000e (SONAME) Library soname: [libbpf.so.0]
And install them accordingly:
# rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld install
Auto-detecting system features:
... libelf: [ on ]
... bpf: [ on ]
CC /tmp/bld/libbpf.o
CC /tmp/bld/bpf.o
CC /tmp/bld/nlattr.o
CC /tmp/bld/btf.o
CC /tmp/bld/libbpf_errno.o
CC /tmp/bld/str_error.o
CC /tmp/bld/netlink.o
CC /tmp/bld/bpf_prog_linfo.o
CC /tmp/bld/libbpf_probes.o
CC /tmp/bld/xsk.o
LD /tmp/bld/libbpf-in.o
LINK /tmp/bld/libbpf.a
LINK /tmp/bld/libbpf.so.0.0.2
LINK /tmp/bld/test_libbpf
INSTALL /tmp/bld/libbpf.a
INSTALL /tmp/bld/libbpf.so.0.0.2
# ll /usr/local/lib64/libbpf.*
/usr/local/lib64/libbpf.a
/usr/local/lib64/libbpf.so -> libbpf.so.0.0.2
/usr/local/lib64/libbpf.so.0 -> libbpf.so.0.0.2
/usr/local/lib64/libbpf.so.0.0.2
Fixes: 1bf4b05810 ("tools: bpftool: add probes for eBPF program types")
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Greg Kroah-Hartman