Just to make this code look more like other places in tools/perf.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-j3j72vvn2d5j7tenlghdy195@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That name isn't used, is shorter, lets switch to it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-e51yphwgvepd1y4f5fjptmjq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'opt' parameter in parse_cgroups() _is_ used. The original patch
used '__used' that was even more confusing :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 023695d96e ("perf tool: Add cgroup support")
Link: https://lkml.kernel.org/n/tip-4jo2puz0empkoou6bbq460tl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
trigger_on() means that the trigger is available but not ready, however
trigger_on() was making it ready. That can segfault if the signal comes
before trigger_ready(). e.g. (USR2 signal delivery not shown)
$ perf record -e intel_pt//u -S sleep 1
perf: Segmentation fault
Obtained 16 stack frames.
/home/ahunter/bin/perf(sighandler_dump_stack+0x40) [0x4ec550]
/lib/x86_64-linux-gnu/libc.so.6(+0x36caf) [0x7fa76411acaf]
/home/ahunter/bin/perf(perf_evsel__disable+0x26) [0x4b9dd6]
/home/ahunter/bin/perf() [0x43a45b]
/lib/x86_64-linux-gnu/libc.so.6(+0x36caf) [0x7fa76411acaf]
/lib/x86_64-linux-gnu/libc.so.6(__xstat64+0x15) [0x7fa7641d2cc5]
/home/ahunter/bin/perf() [0x4ec6c9]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4ec73b]
/home/ahunter/bin/perf() [0x4eca15]
/home/ahunter/bin/perf(machine__create_kernel_maps+0x257) [0x4f0b77]
/home/ahunter/bin/perf(perf_session__new+0xc0) [0x4f86f0]
/home/ahunter/bin/perf(cmd_record+0x722) [0x43c132]
/home/ahunter/bin/perf() [0x4a11ae]
/home/ahunter/bin/perf(main+0x5d4) [0x427fb4]
Note, for testing purposes, this is hard to hit unless you add some sleep()
in builtin-record.c before record__open().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 3dcc4436fa ("perf tools: Introduce trigger class")
Link: http://lkml.kernel.org/r/1519807144-30694-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prevent auxtrace_queues__process_index() from queuing AUX area data for
decoding when the --no-itrace option has been used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When printing stats in CSV mode, 'perf stat' appends extra separators
when a counter is not supported:
<not supported>,,L1-dcache-store-misses,mesos/bd442f34-2b4a-47df-b966-9b281f9f56fc,0,100.00,,,,
Which causes a failure when parsing fields. The numbers of separators
should be the same for each line, no matter if the counter is or not
supported.
Signed-off-by: Ilya Pronin <ipronin@twitter.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20180306064353.31930-1-xiyou.wangcong@gmail.com
Fixes: 92a61f6412 ("perf stat: Implement CSV metrics output")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Be more robust when drawing arrows in the annotation TUI, avoiding a
segfault when jump instructions have as a target addresses in functions
other that the one currently being annotated. The full fix will come in
the following days, when jumping to other functions will work as call
instructions (Arnaldo Carvalho de Melo)
- Allow asking for the maximum allowed sample rate in 'top' and
'record', i.e. 'perf record -F max' will read the
kernel.perf_event_max_sample_rate sysctl and use it (Arnaldo Carvalho de Melo)
- When the user specifies a freq above kernel.perf_event_max_sample_rate,
Throttle it down to that max freq, and warn the user about it, add as
well --strict-freq so that the previous behaviour of not starting the
session when the desired freq can't be used can be selected (Arnaldo Carvalho de Melo)
- Find 'call' instruction target symbol at parsing time, used so far in
the TUI, part of the infrastructure changes that will end up allowing
for jumps to navigate to other functions, just like 'call'
instructions. (Arnaldo Carvalho de Melo)
- Use xyarray dimensions to iterate fds in 'perf stat' (Andi Kleen)
- Ignore threads for which the current user hasn't permissions when
enabling system-wide --per-thread (Jin Yao)
- Fix some backtrace perf test cases to use 'perf record' + 'perf script'
instead, till 'perf trace' starts using ordered_events or equivalent
to avoid symbol resolving artifacts due to reordering of
PERF_RECORD_MMAP events (Jiri Olsa)
- Fix crash in 'perf record' pipe mode, it needs to allocate the ID
array even for a single event, unlike non-pipe mode (Jiri Olsa)
- Make annoying fallback message on older kernels with newer 'perf top'
binaries trying to use overwrite mode and that not being present
in the older kernels (Kan Liang)
- Switch last users of old APIs to the newer perf_mmap__read_event()
one, then discard those old mmap read forward APIs (Kan Liang)
- Fix the usage on the 'perf kallsyms' man page (Sangwon Hong)
- Simplify cgroup arguments when tracking multiple events (weiping zhang)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=TNRi
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.17-20180305' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Be more robust when drawing arrows in the annotation TUI, avoiding a
segfault when jump instructions have as a target addresses in functions
other that the one currently being annotated. The full fix will come in
the following days, when jumping to other functions will work as call
instructions (Arnaldo Carvalho de Melo)
- Allow asking for the maximum allowed sample rate in 'top' and
'record', i.e. 'perf record -F max' will read the
kernel.perf_event_max_sample_rate sysctl and use it (Arnaldo Carvalho de Melo)
- When the user specifies a freq above kernel.perf_event_max_sample_rate,
Throttle it down to that max freq, and warn the user about it, add as
well --strict-freq so that the previous behaviour of not starting the
session when the desired freq can't be used can be selected (Arnaldo Carvalho de Melo)
- Find 'call' instruction target symbol at parsing time, used so far in
the TUI, part of the infrastructure changes that will end up allowing
for jumps to navigate to other functions, just like 'call'
instructions. (Arnaldo Carvalho de Melo)
- Use xyarray dimensions to iterate fds in 'perf stat' (Andi Kleen)
- Ignore threads for which the current user hasn't permissions when
enabling system-wide --per-thread (Jin Yao)
- Fix some backtrace perf test cases to use 'perf record' + 'perf script'
instead, till 'perf trace' starts using ordered_events or equivalent
to avoid symbol resolving artifacts due to reordering of
PERF_RECORD_MMAP events (Jiri Olsa)
- Fix crash in 'perf record' pipe mode, it needs to allocate the ID
array even for a single event, unlike non-pipe mode (Jiri Olsa)
- Make annoying fallback message on older kernels with newer 'perf top'
binaries trying to use overwrite mode and that not being present
in the older kernels (Kan Liang)
- Switch last users of old APIs to the newer perf_mmap__read_event()
one, then discard those old mmap read forward APIs (Kan Liang)
- Fix the usage on the 'perf kallsyms' man page (Sangwon Hong)
- Simplify cgroup arguments when tracking multiple events (weiping zhang)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently we can crash perf record when running in pipe mode, like:
$ perf record ls | perf report
# To display the perf.data header info, please use --header/--header-only options.
#
perf: Segmentation fault
Error:
The - file has no samples!
The callstack of the crash is:
0x0000000000515242 in perf_event__synthesize_event_update_name
3513 ev = event_update_event__new(len + 1, PERF_EVENT_UPDATE__NAME, evsel->id[0]);
(gdb) bt
#0 0x0000000000515242 in perf_event__synthesize_event_update_name
#1 0x00000000005158a4 in perf_event__synthesize_extra_attr
#2 0x0000000000443347 in record__synthesize
#3 0x00000000004438e3 in __cmd_record
#4 0x000000000044514e in cmd_record
#5 0x00000000004cbc95 in run_builtin
#6 0x00000000004cbf02 in handle_internal_command
#7 0x00000000004cc054 in run_argv
#8 0x00000000004cc422 in main
The reason of the crash is that the evsel does not have ids array
allocated and the pipe's synthesize code tries to access it.
We don't force evsel ids allocation when we have single event, because
it's not needed. However we need it when we are in pipe mode even for
single event as a key for evsel update event.
Fixing this by forcing evsel ids allocation event for single event, when
we are in pipe mode.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180302161354.30192-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This first happened with a gcc function, _cpp_lex_token, that has the
usual jumps:
│1159e6c: ↓ jne 115aa32 <_cpp_lex_token@@Base+0xf92>
I.e. jumps to a label inside that function (_cpp_lex_token), and those
works, but also this kind:
│1159e8b: ↓ jne c469be <cpp_named_operator2name@@Base+0xa72>
I.e. jumps to another function, outside _cpp_lex_token, which are not
being correctly handled generating as a side effect references to
ab->offset[] entries that are set to NULL, so to make this code more
robust, check that here.
A proper fix for will be put in place, looking at the function name
right after the '<' token and probably treating this like a 'call'
instruction.
For now just don't draw the arrow.
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: https://lkml.kernel.org/n/tip-5tzvb875ep2sel03aeefgmud@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On older (e.g. v4.4) kernels, an annoying fallback message can be
observed in 'perf top':
┌─Warning:──────────────────────┐
│fall back to non-overwrite mode│
│ │
│ │
│Press any key... │
└───────────────────────────────┘
The 'perf top' utility has been changed to overwrite mode since commit
ebebbf0823 ("perf top: Switch default mode to overwrite mode").
For older kernels which don't have overwrite mode support, 'perf top'
will fall back to non-overwrite mode and print out the fallback message
using ui__warning(), which needs user's input to close.
The fallback message is not critical for end users. Turning it to debug
message which is printed when running with -vv.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Fixes: ebebbf0823 ("perf top: Switch default mode to overwrite mode")
Link: http://lkml.kernel.org/r/1519669030-176549-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First, all man pages highlight only perf and subcommands except 'perf
kallsyms', which includes the full usage. Fix it for commands to
monopolize underlines.
Second, options can be ommited when executing 'perf kallsyms', so add
square brackets between <option>.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1518377864-20353-1-git-send-email-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Discards legacy interfaces perf_evlist__mmap_read_forward(),
perf_evlist__mmap_read() and perf_evlist__mmap_consume().
No tools use them.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-14-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'task-exit' still use the legacy interface.
No functional change.
Committer notes:
Testing it:
# perf test exit
21: Number of exit events of a simple workload : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-13-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'switch-tracking' still use the legacy interface.
No functional change.
Committer testing:
# perf test switch
32: Track with sched_switch : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-12-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'sw-clock' still use the legacy interface.
No functional change.
Committer testing:
# perf test clock
22: Software clock events period values : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-11-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'time-to-tsc' still use the legacy interface.
No functional change.
Commiter notes:
Testing it:
# perf test tsc
57: Convert perf time to TSC : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-10-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'perf-record' still use the legacy interface.
No functional change.
Committer notes:
Testing it:
# perf test PERF_RECORD
8: PERF_RECORD_* events & perf_sample fields : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-9-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'syscalls:sys_enter_openat event fields' still use the
legacy interface.
No functional change.
Committer notes:
Testing it:
# perf test sys_enter_openat
15: syscalls:sys_enter_openat event fields : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-8-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'mmap-basic' still use the legacy interface.
No functional change.
Committer notes:
Testing it:
# perf test "mmap interface"
4: Read samples using the mmap interface : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-7-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'keep tracking' still use the legacy interface.
No functional change.
Committer testing:
# perf test tracking
25: Use a dummy software event to keep tracking : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-6-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'object code reading' still use the legacy interface.
No functional change.
Committer notes:
Testing:
# perf test reading
23: Object code reading: Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-5-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test 'bpf' still use the legacy interface.
No functional change.
Committer notes:
Tested with:
# perf test bpf
39: BPF filter :
39.1: Basic BPF filtering : Ok
39.2: BPF pinning : Ok
39.3: BPF prologue generation : Ok
39.4: BPF relocation checker : Ok
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-4-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf trace' utility still use the legacy interface.
Switch to the new perf_mmap__read_event() interface.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-2-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf kvm still use the legacy interface.
Switch to the new perf_mmap__read_event() interface for perf kvm.
No functional change.
Committer notes:
Tested before and after running:
# perf kvm stat record
On a machine with a kvm guest, then used:
# perf kvm stat report
Before/after results match and look like:
# perf kvm stat record -a sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.132 MB perf.data.guest (1828 samples) ]
# perf kvm stat report
Analyze events for all VMs, all VCPUs:
VM-EXIT Samples Samples% Time% Min Time Max Time Avg time
IO_INSTRUCTION 258 40.06% 0.08% 3.51us 122.54us 14.87us (+- 6.76%)
MSR_WRITE 178 27.64% 0.01% 0.47us 6.34us 2.18us (+- 4.80%)
EPT_MISCONFIG 148 22.98% 0.03% 3.76us 65.60us 11.22us (+- 8.14%)
HLT 47 7.30% 99.88% 181.69us 249988.06us 102061.36us (+-13.49%)
PAUSE_INSTRUCTION 5 0.78% 0.00% 0.38us 0.79us 0.47us (+-17.05%)
MSR_READ 4 0.62% 0.00% 1.14us 3.33us 2.67us (+-19.35%)
EXTERNAL_INTERRUPT 2 0.31% 0.00% 2.15us 2.17us 2.16us (+- 0.30%)
PENDING_INTERRUPT 1 0.16% 0.00% 2.56us 2.56us 2.56us (+- 0.00%)
PREEMPTION_TIMER 1 0.16% 0.00% 3.21us 3.21us 3.21us (+- 0.00%)
Total Samples:644, Total events handled time:4802790.72us.
#
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1519945751-37786-1-git-send-email-kan.liang@linux.intel.com
[ Changed bool parameters from 0 to 'false', as per Jiri comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we can crash perf record when running in pipe mode, like:
$ perf record ls | perf report
# To display the perf.data header info, please use --header/--header-only options.
#
perf: Segmentation fault
Error:
The - file has no samples!
The callstack of the crash is:
0x0000000000515242 in perf_event__synthesize_event_update_name
3513 ev = event_update_event__new(len + 1, PERF_EVENT_UPDATE__NAME, evsel->id[0]);
(gdb) bt
#0 0x0000000000515242 in perf_event__synthesize_event_update_name
#1 0x00000000005158a4 in perf_event__synthesize_extra_attr
#2 0x0000000000443347 in record__synthesize
#3 0x00000000004438e3 in __cmd_record
#4 0x000000000044514e in cmd_record
#5 0x00000000004cbc95 in run_builtin
#6 0x00000000004cbf02 in handle_internal_command
#7 0x00000000004cc054 in run_argv
#8 0x00000000004cc422 in main
The reason of the crash is that the evsel does not have ids array
allocated and the pipe's synthesize code tries to access it.
We don't force evsel ids allocation when we have single event, because
it's not needed. However we need it when we are in pipe mode even for
single event as a key for evsel update event.
Fixing this by forcing evsel ids allocation event for single event, when
we are in pipe mode.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180302161354.30192-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we do it just once, not everytime we press enter or -> on a
'call' instruction line.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-uysyojl1e6nm94amzzzs08tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
# perf record -F 200000 sleep 1
warning: Maximum frequency rate (15,000 Hz) exceeded, throttling from 200,000 Hz to 15,000 Hz.
The limit can be raised via /proc/sys/kernel/perf_event_max_sample_rate.
The kernel will lower it when perf's interrupts take too long.
Use --strict-freq to disable this throttling, refusing to record.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data (15 samples) ]
# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 15000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
For those wanting that it fails if the desired frequency can't be used:
# perf record --strict-freq -F 200000 sleep 1
error: Maximum frequency rate (15,000 Hz) exceeded.
Please use -F freq option with a lower value or consider
tweaking /proc/sys/kernel/perf_event_max_sample_rate.
#
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-oyebruc44nlja499nqkr1nzn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the handy '-F max' shortcut, just introduced to 'perf record', to
reading and using the kernel.perf_event_max_sample_rate value as the
user supplied sampling frequency:
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hz04f296zccknnb5at06a6q0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '--stdio' 'perf top' UI shows it, so lets remove this UI difference
and show it too in '--tui', will be useful for 'perf top --tui -F max'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-n3wd8n395uo4y9irst29pjic@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because the test is no longer using perf trace but perf record instead.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180301165215.6780-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's a problem with relying on backtrace data from 'perf trace' the
way the trace+probe_libc_inet_pton does. This test inserts uprobe within
ping binary and checks that it gets its sample using 'perf trace'.
It also checks it gets proper backtrace from sample and that's where the
issue is.
The 'perf trace' does not sort events (by definition) so it can happen
that it processes the event sample before the ping binary memory map
event. This can (very rarely) happen as proved by this events dump
output (from custom added debug output):
...
7680/7680: [0x7f4e29718000(0x204000) @ 0 fd:00 33611321 4230892504]: r-xp /usr/lib64/libdl-2.17.so
7680/7680: [0x7f4e29502000(0x216000) @ 0 fd:00 33617257 2606846872]: r-xp /usr/lib64/libz.so.1.2.7
(IP, 0x2): 7680/7680: 0x7f4e29c2ed60 period: 1 addr: 0
7680/7680: [0x564842ef0000(0x233000) @ 0 fd:00 83 1989280200]: r-xp /usr/bin/ping
7680/7680: [0x7f4e2aca2000(0x224000) @ 0 fd:00 33611308 1219144940]: r-xp /usr/lib64/ld-2.17.so
...
In this case 'perf trace' fails to resolve the last callchain IP (within
the ping binary) because it does not know about the ping binary memory
map yet and the test fails like this:
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.037 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.037/0.037/0.037/0.000 ms
0.000 probe_libc:inet_pton:(7f4e29c2ed60))
__GI___inet_pton (/usr/lib64/libc-2.17.so)
getaddrinfo (/usr/lib64/libc-2.17.so)
[0] ([unknown])
FAIL: expected backtrace entry 8 ".*\(.*/bin/ping.*\)$" got "[0] ([unknown])"
Switching the test to use 'perf record' and 'perf script' instead of
'perf trace'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180301165215.6780-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This first happened with a gcc function, _cpp_lex_token, that has the
usual jumps:
│1159e6c: ↓ jne 115aa32 <_cpp_lex_token@@Base+0xf92>
I.e. jumps to a label inside that function (_cpp_lex_token), and those
works, but also this kind:
│1159e8b: ↓ jne c469be <cpp_named_operator2name@@Base+0xa72>
I.e. jumps to another function, outside _cpp_lex_token, which are not
being correctly handled generating as a side effect references to
ab->offset[] entries that are set to NULL, so to make this code more
robust, check that here.
A proper fix for will be put in place, looking at the function name
right after the '<' token and probably treating this like a 'call'
instruction.
For now just don't draw the arrow.
Reported-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: https://lkml.kernel.org/n/tip-5tzvb875ep2sel03aeefgmud@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we execute 'perf stat --per-thread' with non-root account (even set
kernel.perf_event_paranoid = -1 yet), it reports the error:
jinyao@skl:~$ perf stat --per-thread
Error:
You may not have permission to collect system-wide stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
which controls use of the performance events system by
unprivileged users (without CAP_SYS_ADMIN).
The current value is 2:
-1: Allow use of (almost) all events by all users
Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK
>= 0: Disallow ftrace function tracepoint by users without CAP_SYS_ADMIN
Disallow raw tracepoint access by users without CAP_SYS_ADMIN
>= 1: Disallow CPU event access by users without CAP_SYS_ADMIN
>= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN
To make this setting permanent, edit /etc/sysctl.conf too, e.g.:
kernel.perf_event_paranoid = -1
Perhaps the ptrace rule doesn't allow to trace some processes. But anyway
the global --per-thread mode had better ignore such errors and continue
working on other threads.
This patch will record the index of error thread in perf_evsel__open()
and remove this thread before retrying.
For example (run with non-root, kernel.perf_event_paranoid isn't set):
jinyao@skl:~$ perf stat --per-thread
^C
Performance counter stats for 'system wide':
vmstat-3458 6.171984 cpu-clock:u (msec) # 0.000 CPUs utilized
perf-3670 0.515599 cpu-clock:u (msec) # 0.000 CPUs utilized
vmstat-3458 1,163,643 cycles:u # 0.189 GHz
perf-3670 40,881 cycles:u # 0.079 GHz
vmstat-3458 1,410,238 instructions:u # 1.21 insn per cycle
perf-3670 3,536 instructions:u # 0.09 insn per cycle
vmstat-3458 288,937 branches:u # 46.814 M/sec
perf-3670 936 branches:u # 1.815 M/sec
vmstat-3458 15,195 branch-misses:u # 5.26% of all branches
perf-3670 76 branch-misses:u # 8.12% of all branches
12.651675247 seconds time elapsed
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1516117388-10120-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On older (e.g. v4.4) kernels, an annoying fallback message can be
observed in 'perf top':
┌─Warning:──────────────────────┐
│fall back to non-overwrite mode│
│ │
│ │
│Press any key... │
└───────────────────────────────┘
The 'perf top' utility has been changed to overwrite mode since commit
ebebbf0823 ("perf top: Switch default mode to overwrite mode").
For older kernels which don't have overwrite mode support, 'perf top'
will fall back to non-overwrite mode and print out the fallback message
using ui__warning(), which needs user's input to close.
The fallback message is not critical for end users. Turning it to debug
message which is printed when running with -vv.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Fixes: ebebbf0823 ("perf top: Switch default mode to overwrite mode")
Link: http://lkml.kernel.org/r/1519669030-176549-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using -G with one cgroup and -e with multiple events, only the
first event gets the correct cgroup setting, all events from the second
onwards will track system-wide events.
If the user wants to track multiple events for a specific cgroup, the
user must give parameters like the following:
$ perf stat -e e1 -e e2 -e e3 -G test,test,test
This patch simplify this case, just type one cgroup:
$ perf stat -e e1 -e e2 -e e3 -G test
$ mkdir -p /sys/fs/cgroup/perf_event/empty_cgroup
$ perf stat -e cycles -e cache-misses -a -I 1000 -G empty_cgroup
Before:
1.001007226 <not counted> cycles empty_cgroup
1.001007226 7,506 cache-misses
After:
1.000834097 <not counted> cycles empty_cgroup
1.000834097 <not counted> cache-misses empty_cgroup
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180129154805.GA6284@localhost.didichuxing.com
[ Improved the doc text a bit, providing an example for cgroup + system wide counting ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently a number of Makefiles break when used with toolchains that
pass extra flags in CC and other cross-compile related variables (such
as --sysroot).
Thus we get this error when we use a toolchain that puts --sysroot in
the CC var:
~/src/linux/tools$ make iio
[snip]
iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory
#include <unistd.h>
^~~~~~~~~~
This occurs because we clobber several env vars related to
cross-compiling with lines like this:
CC = $(CROSS_COMPILE)gcc
Although this will point to a valid cross-compiler, we lose any extra
flags that might exist in the CC variable, which can break toolchains
that rely on them (for example, those that use --sysroot).
This easily shows up using a Yocto SDK:
$ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi
$ echo $CC
arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard
-mcpu=cortex-a8
--sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi
$ echo $CROSS_COMPILE
arm-poky-linux-gnueabi-
$ echo ${CROSS_COMPILE}gcc
krm-poky-linux-gnueabi-gcc
Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the
--sysroot and other flags that enable us to find the right libraries to
link against, so we can't find unistd.h and other libraries and headers.
Normally with the --sysroot flag we would find unistd.h in the sdk
directory in the sysroot:
$ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h'
[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h
The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not
already set, and it compiles correctly with the above toolchain.
So, generalize the logic that perf uses in the common Makefile and
remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile.
Note that this patch does not fix cross-compile for all the tools (some
have other bugs), but it does fix it for all except usb and acpi, which
still have other unrelated issues.
I tested both with and without the patch on native and cross-build and
there appear to be no regressions.
Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Pali Rohar <pali.rohar@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Lv Zheng <lv.zheng@intel.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the xyarray stores the dimensions we can use those
to iterate over the FDs for a evsel.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20171006020029.13339-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First, all man pages highlight only perf and subcommands except 'perf
kallsyms', which includes the full usage. Fix it for commands to
monopolize underlines.
Second, options can be ommited when executing 'perf kallsyms', so add
square brackets between <option>.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1518377864-20353-1-git-send-email-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used to test patches allowing to build perf with python3, so
that we make sure that we can build with both versions.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-c2ynv0ozr3eifzsyit6qgh3h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this change, the '--graph-funcs', '--nograph-funcs' and
'--trace-funcs' options didn't work as expected when the <func> doesn't
exist. Because the kernel side hid possible errors.
$ sudo ./perf ftrace -a --graph-depth 1 --graph-funcs abcdefg
0) 0.140 us | rcu_all_qs();
3) 0.304 us | mutex_unlock();
0) 0.153 us | find_vma();
3) 0.088 us | __fsnotify_parent();
0) 6.145 us | handle_mm_fault();
3) 0.089 us | fsnotify();
3) 0.161 us | __sb_end_write();
3) 0.710 us | SyS_close();
3) 7.848 us | exit_to_usermode_loop();
On the example above, I specified the function filter 'abcdefg' but all
functions are enabled. The expected result is for all functions to be
filtered, since there is no such function ('abcdefg')
The original fix is to make the kernel support '\0' as end of string:
https://lkml.org/lkml/2018/1/16/116
But above fix cannot be compatible with old kernels. Then Namhyung Kim
suggest adding a space after function name.
This patch will append an '\n' when write tracing file. After this fix,
the perf will report correct error state. Also let it print an error if
reset_tracing_files() fails.
Committer testing:
Now it prints:
# perf ftrace -a --graph-depth 1 --graph-funcs abcdefg
failed to set tracing filters
#
And for an existing function:
# perf ftrace -a --graph-depth 1 --graph-funcs SyS_open
3) | SyS_open() {
3) ! 494.899 us | }
0) + 23.910 us | SyS_open();
1) + 17.115 us | SyS_open();
1) + 13.900 us | SyS_open();
------------------------------------------
3) qemu-sy-2817 => pickup-1290
------------------------------------------
3) + 20.021 us | SyS_open();
#
Signed-off-by: Changbin Du <changbin.du@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1519007609-14551-1-git-send-email-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The machine__set_kernel_mmap() is to setup addresses of the kernel map
using external info. But it has a check when the address is given from
an incorrect input which should have the start and end address of 0
(i.e. machine__process_kernel_mmap_event).
But we also use the end address of 0 for a valid input so change it to
check both start and end addresses.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20180219101936.GD1583@sejong
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit eca0fa28cd (perf record: Provide detailed information on s390
CPU") fixed a build error on Ubuntu. However the fix uses the wrong
size to print the model information.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fixes: eca0fa28cd ("perf record: Provide detailed information on s390 CPU")
Link: http://lkml.kernel.org/r/20180219102444.96900-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some situations the vfs_getname is being added both as requested and
with a _1 suffix (inlines?):
probe:vfs_getname_1 (on getname_flags:63@acme/git/linux/fs/namei.c with pathname)
This ends up making the cleanup to miss that one, as it removes just
'probe:vfs_getname', which makes the second test to use this probe point
to fail, since it finds that leftover from the first test, use a
wildcard to remove both.
Before:
# perf test 60 61 62 63
60: Use vfs_getname probe to get syscall args filenames : FAILED!
61: probe libc's inet_pton & backtrace it with ping : Ok
62: Check open filename arg using perf trace + vfs_getname: FAILED!
63: Add vfs_getname probe to get syscall args filenames : Ok
After:
# perf test 60 61 62 63
60: Use vfs_getname probe to get syscall args filenames : Ok
61: probe libc's inet_pton & backtrace it with ping : Ok
62: Check open filename arg using perf trace + vfs_getname: Ok
63: Add vfs_getname probe to get syscall args filenames : Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2k5kutwr4ds36adiakyb4yvy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using Fedora 27 and latest Linux kernel the test case
trace+probe_libc_inet_pton.sh fails again on s390. This time is the
inlining of functions which does not match. After an update of the
glibc (from 2.26-16 to 2.26-24) the output is different
The expected output is:
__inet_pton (/usr/lib64/libc-2.26.so)
gaih_inet (inlined)
....
The actual output is:
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.061/0.061/0.061/0.000 ms
0.000 probe_libc:inet_pton:(3ffb2140448))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
...
Fix this by being less strict on 'inlined' verses library name and
accept both
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180214070303.55757-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390 perf can be executed on a LPAR with support for hardware events
(i. e. cycles) or on a z/VM or KVM guest where no hardware events are
supported. In this environment use software event named cpu-clock for
this test case.
Use the cpuid infrastructure functions to determine the cpuid on s390
which contains an indication of the cpu counter facility availability.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180213151419.80737-4-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The function get_cpuid_str() is called by perf_pmu__getcpuid() and on
s390 returns a complete description of the CPU and its capabilities,
which is a comma separated list.
To map the CPU type with the value defined in the
pmu-events/arch/s390/mapfile.csv, introduce an architecture specific
cpuid compare function named strcmp_cpuid_str()
The currently used regex algorithm is defined as the weak default and
will be used if no platform specific one is defined. This matches the
current behavior.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180213151419.80737-3-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Scan the cpuid string and extract the type number for later use.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180213151419.80737-2-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf record ... is setup to record data, the s390 cpu information
was a fixed string "IBM/S390".
Replace this string with one containing more information about the
machine. The information included in the cpuid is a comma separated
list:
manufacturer,type,model-capacity,model[,version,authorization]
with
- manufacturer: up to 16 byte name of the manufacturer (IBM).
- type: a four digit number refering to the machine
generation.
- model-capacitiy: up to 16 characters describing number
of cpus etc.
- model: up to 16 characters describing model.
- version: the CPU-MF counter facility version number,
available on LPARs only, omitted on z/VM guests.
- authorization: the CPU-MF counter facility authorization level,
available on LPARs only, omitted on z/VM guests.
Before:
[root@s8360047 perf]# ./perf record -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (4 samples) ]
[root@s8360047 perf]# ./perf report --header | fgrep cpuid
# cpuid : IBM/S390
[root@s8360047 perf]#
After:
[root@s35lp76 perf]# ./perf report --header|fgrep cpuid
# cpuid : IBM,3906,704,M03,3.5,002f
[root@s35lp76 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180213151419.80737-1-tmricht@linux.vnet.ibm.com
[ Use scnprintf instead of strncat to fix build errors on gcc GNU C99 5.4.0 20160609 -march=zEC12 -m64 -mzarch -ggdb3 -O6 -std=gnu99 -fPIC -fno-omit-frame-pointer -funwind-tables -fstack-protector-all ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This should speed up accessing new system calls introduced with the
kernel rather than waiting for libaudit updates to include them.
It also enables users to specify wildcards, for example, perf trace -e
'open*', just like was already possible on x86 and s390.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20180129083417.31240-4-ravi.bangoria@linux.vnet.ibm.com
[ Do it for ppc32 as well ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This should speed up accessing new system calls introduced with the
kernel rather than waiting for libaudit updates to include them.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20180129083417.31240-3-ravi.bangoria@linux.vnet.ibm.com
[ Made it generate syscall_32.c as well to fix the build on 32-bit ppc ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used for generating the syscall id/string translation table.
Committer notes:
Update it already to catch with these csets applied since Ravi first
submitted this patch:
3350eb2ea1 powerpc: sys_pkey_mprotect() system call
9499ec1b5e powerpc: sys_pkey_alloc() and sys_pkey_free() system calls
So now 'perf trace' on ppc now knows about the pkey_ syscals.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20180129083417.31240-2-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao reported memory corrupton in perf report with
branch info used for stack trace:
> Following command lines will cause perf crash.
> perf record -j call -g -a <application>
> perf report --branch-history
>
> *** Error in `perf': double free or corruption (!prev): 0x00000000104aa040 ***
> ======= Backtrace: =========
> /lib/x86_64-linux-gnu/libc.so.6(+0x77725)[0x7f6b37254725]
> /lib/x86_64-linux-gnu/libc.so.6(+0x7ff4a)[0x7f6b3725cf4a]
> /lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f6b37260abc]
> perf[0x51b914]
> perf(hist_entry_iter__add+0x1e5)[0x51f305]
> perf[0x43cf01]
> perf[0x4fa3bf]
> perf[0x4fa923]
> perf[0x4fd396]
> perf[0x4f9614]
> perf(perf_session__process_events+0x89e)[0x4fc38e]
> perf(cmd_report+0x15d2)[0x43f202]
> perf[0x4a059f]
> perf(main+0x631)[0x427b71]
> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f6b371fd830]
> perf(_start+0x29)[0x427d89]
For the cumulative output, we allocate the he_cache array based on the
--max-stack option value and populate it with data from 'callchain_cursor'.
The --max-stack option value does not ensure now the limit for number of
callchain_cursor nodes, so the cumulative iter code will allocate smaller array
than it's actually needed and cause above corruption.
I think the --max-stack limit does not apply here anyway, because we add
callchain data as normal hist entries, while the --max-stack control the limit
of single entry callchain depth.
Using the callchain_cursor.nr as he_cache array count to fix this. Also
removing struct hist_entry_iter::max_stack, because there's no longer any use
for it.
We need more fixes to ensure that the branch stack code follows properly the
logic of --max-stack, which is not the case at the moment.
Original-patch-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180216123619.GA9945@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we use perf report interactive annotate view, we can see
the position of jump arrow is not correct. For example,
1. perf record -b ...
2. perf report
3. In interactive mode, select Annotate 'function'
Percent│ IPC Cycle
│ if (flag)
1.37 │0.4┌── 1 ↓ je 82
│ │ x += x / y + y / x;
0.00 │0.4│ 1310 movsd (%rsp),%xmm0
0.00 │0.4│ 565 movsd 0x8(%rsp),%xmm4
│0.4│ movsd 0x8(%rsp),%xmm1
│0.4│ movsd (%rsp),%xmm3
│0.4│ divsd %xmm4,%xmm0
0.00 │0.4│ 579 divsd %xmm3,%xmm1
│0.4│ movsd (%rsp),%xmm2
│0.4│ addsd %xmm1,%xmm0
│0.4│ addsd %xmm2,%xmm0
0.00 │0.4│ movsd %xmm0,(%rsp)
│ │ volatile double x = 1212121212, y = 121212;
│ │
│ │ s_randseed = time(0);
│ │ srand(s_randseed);
│ │
│ │ for (i = 0; i < 2000000000; i++) {
1.37 │0.4└─→ 82: sub $0x1,%ebx
28.21 │0.48 17 ↑ jne 38
The jump arrow in above example is not correct. It should add the
width of IPC and Cycle.
With this patch, the result is:
Percent│ IPC Cycle
│ if (flag)
1.37 │0.48 1 ┌──je 82
│ │ x += x / y + y / x;
0.00 │0.48 1310 │ movsd (%rsp),%xmm0
0.00 │0.48 565 │ movsd 0x8(%rsp),%xmm4
│0.48 │ movsd 0x8(%rsp),%xmm1
│0.48 │ movsd (%rsp),%xmm3
│0.48 │ divsd %xmm4,%xmm0
0.00 │0.48 579 │ divsd %xmm3,%xmm1
│0.48 │ movsd (%rsp),%xmm2
│0.48 │ addsd %xmm1,%xmm0
│0.48 │ addsd %xmm2,%xmm0
0.00 │0.48 │ movsd %xmm0,(%rsp)
│ │ volatile double x = 1212121212, y = 121212;
│ │
│ │ s_randseed = time(0);
│ │ srand(s_randseed);
│ │
│ │ for (i = 0; i < 2000000000; i++) {
1.37 │0.48 82:└─→sub $0x1,%ebx
28.21 │0.48 17 ↑ jne 38
Committer notes:
Please note that only from LBRv5 (according to Jiri) onwards, i.e. >=
Skylake is that we'll have the cycles counts in each branch record
entry, so to see the Cycles and IPC columns, and be able to test this
patch, one need a capable hardware.
While applying this I first tested it on a Broadwell class machine and
couldn't get those columns, will add code to the annotate browser to
warn the user about that, i.e. you have branch records, but no cycles,
use a more recent hardware to get the cycles and IPC columns.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1517223473-14750-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There may be discontinuities in the ETM trace stream due to overflows or
ETM configuration for selective trace. This patch emits an instruction
sample with the pending branch stack when a TRACE ON packet occurs
indicating a discontinuity in the trace data.
A new packet type CS_ETM_TRACE_ON is added, which is emitted by the low
level decoder when a TRACE ON occurs. The higher level decoder flushes
the branch stack when this packet is emitted.
Signed-off-by: Robert Walker <robert.walker@arm.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1518607481-4059-3-git-send-email-robert.walker@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Added user space perf functionality to translate CoreSight traces into
instruction events with branch stack.
To invoke the new functionality, use the perf inject tool with
--itrace=il. For example, to translate the ETM trace from perf.data into
last branch records in a new inj.data file:
$ perf inject --itrace=i100000il128 -i perf.data -o perf.data.new
The 'i' parameter to itrace generates periodic instruction events. The
period between instruction events can be specified as a number of
instructions suffixed by i (default 100000).
The parameter to 'l' specifies the number of entries in the branch stack
attached to instruction events.
The 'b' parameter to itrace generates events on taken branches.
This patch also fixes the contents of the branch events used in perf
report - previously branch events were generated for each contiguous
range of instructions executed. These are fixed to generate branch
events between the last address of a range ending in an executed branch
instruction and the start address of the next range.
Based on patches by Sebastian Pop <s.pop@samsung.com> with additional fixes
and support for specifying the instruction period.
Originally-by: Sebastian Pop <s.pop@samsung.com>
Signed-off-by: Robert Walker <robert.walker@arm.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1518607481-4059-2-git-send-email-robert.walker@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the missing --force option on the man page.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1518381517-30766-2-git-send-email-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First, 'perf kmem' has a '--force' option, but didn't document it on the
man page. So add it.
Second, the '--time' option has to get a value, but isn't documented on
the man page. Describe it.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1518381517-30766-1-git-send-email-qpakzk@gmail.com
[ Add blank like after --force block, as requested by Namhyung ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some options must require an argument. But input, stdio-color, cpu have
no them. So I added it.
Signed-off-by: Jaecheol Shin <jcgod413@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20180207095205.62715-1-jcgod413@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch allows the CoreSight AUX info section to fit topologies where
only a subset of all available CPUs are present, avoiding at the same
time accessing the ETM configuration areas of CPUs that have been
offlined.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1518478737-24649-1-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When working natively on arm64 the compiler gets pesky and complains
that variable 'i' is uninitialised, something that breaks the
compilation. Here no further checks are needed since variable
'found_spe' can only be true if variable 'i' has been initialised as
part of the for loop.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1518467557-18505-4-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mathieu Poirier reports issue in commit ("73c0ca1eee3d perf thread_map:
Enumerate all threads from /proc") that it has negative impact on 'perf
record --per-thread'. It has the effect of creating a kernel event for
each thread in the system for 'perf record --per-thread'.
Mathieu Poirier's patch ("perf util: Do not reuse target->per_thread flag")
can fix this issue by creating a new target->all_threads flag.
This patch is based on Mathieu Poirier's patch but it doesn't use a new
target->all_threads flag. This patch just uses 'target->per_thread &&
target->system_wide' as a condition to check for all threads case.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Fixes: 73c0ca1eee ("perf thread_map: Enumerate all threads from /proc")
Link: http://lkml.kernel.org/r/1518467557-18505-3-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
[Fixed checkpatch warning about line over 80 characters]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch frees all the memory allocated in function
cs_etm__alloc_queue().
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1518467557-18505-2-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The symbol search called by machine__find_kernel_symbol_by_name is using
internally arch__compare_symbol_names function to compare 2 symbol
names, because different archs have different ways of comparing symbols.
Mostly for skipping '.' prefixes and similar.
In test 1 when we try to find matching symbols in kallsyms and vmlinux,
by address and by symbol name. When either is found we compare the pair
symbol names by simple strcmp, which is not good enough for reasons
explained in previous paragraph.
On powerpc this can cause lockup, because even thought we found the
pair, the compared names are different and don't match simple strcmp.
Following code path is executed, that leads to lockup:
- we find the pair in kallsyms by sym->start
next_pair:
- we compare the names and it fails
- we find the pair by sym->name
- the pair addresses match so we call goto next_pair
because we assume the names match in this case
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 031b84c407 ("perf probe ppc: Enable matching against dot symbols automatically")
Link: http://lkml.kernel.org/r/20180215122635.24029-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need for kernel maps to be allocated at this point - sample
processing.
We search for kernel maps using the kernel map_groups in machine::kmaps
which is static. If vmlinux maps for any reason still don't exist, the
search correctly fails because they are not in the map group.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current machine__load_kallsyms() function has no caller, so replace
it directly with __machine__load_kallsyms(). Also remove the no_kcore
argument as it was always called with a 'true' value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We should not search for the kernel start address in
__machine__create_kernel_maps(), because it's being used in the 'report'
code path, where we are interested in kernel MMAP data address (the one
recorded via 'perf record', possibly on another machine, or an older or
newer kernel on the same machine where analysis is being performed)
instead of in current kernel address.
The __machine__create_kernel_maps() function serves purely for creating
the machines kernel maps and setting up the kmap group. The report code
path then sets the address based on the data from kernel MMAP event in
the machine__set_kernel_mmap() function.
The kallsyms search address logic is used for test code, that calls
machine__create_kernel_maps() to get current maps and calls
machine__get_running_kernel_start() to get kernel starting address.
Use machine__set_kernel_mmap() to set the kernel maps start address and
moving map_groups__fixup_end to be call when all maps are in place.
Also make __machine__create_kernel_maps static, because there's no
external user.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So it could be called without event object, just with start and end
values. It will be used in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It simplifies and centralizes the code. The kernel mmap name is set for
machine type, which we know from the beginning, so there's no reason to
generate it every time we need it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Free root_dir in machine__init() error path.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current code in dso__load() calls is_regular_file(), but it checks
its return value only after calling symsrc__init().
That can make symsrc__init() block in elf_* functions on reading
the file if the file happens to be device and not regular one.
Call symsrc__init() only for regular files. Also remove the
symsrc__destroy() cleanup, which is not needed now, because we call
symsrc__init() only for regular files.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180215122635.24029-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new option to print counts after N milliseconds and update
'perf stat' documentation accordingly.
Show below is the output of the new option for perf stat.
$ perf stat --time 2000 -e cycles -a
Performance counter stats for 'system wide':
157,260,423 cycles
2.003060766 seconds time elapsed
We can print the count deltas after N milliseconds with this new
introduced option. This option is not supported with "-I" option.
In addition, according to Kangliang's patch(19afd10410), the
monitoring overhead for system-wide core event could be very high if the
interval-print parameter was below 100ms, and the limitation value is
10ms.
So the same warning will be displayed when the time is set between 10ms
to 100ms, and the minimal time is limited to 10ms. Users can make a
decision according to their spcific cases.
Committer notes:
This actually stops the workload after the specified time, then prints
the counts.
So I renamed the option to --timeout and updated the documentation to
state that it will not just print the counts after the specified time,
but will really stop the 'perf stat' session and print the counts.
The rename from 'time' to 'timeout' also fixes the build in systems
where 'time' is used by glibc and can't be used as a name of a variable,
such as centos:5 and centos:6.
Changes since v3:
- none.
Changes since v2:
- modify the time check in __run_perf_stat func to keep some consistency
with the workload case.
- add the warning when the time is set between 10ms to 100ms.
- add the pr_err when the time is set below 10ms.
Changes since v1:
- none.
Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1517217923-8302-3-git-send-email-ufo19890607@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new option to print counts for fixed number of times and
update 'perf stat' documentation accordingly.
Show below is the output of the new option for perf stat.
$ perf stat -I 1000 --interval-count 2 -e cycles -a
# time counts unit events
1.002827089 93,884,870 cycles
2.004231506 56,573,446 cycles
We can just print the counts for several times with this newly
introduced option. The usage of it is a little like 'vmstat', and it
should be used together with "-I" option.
$ vmstat -n 1 2
procs ---------memory-------------- --swap- ----io-- -system-- ------cpu---
r b swpd free buff cache si so bi bo in cs us sy id wa st
0 0 0 78270544 547484 51732076 0 0 0 20 1 1 1 0 99 0 0
0 0 0 78270512 547484 51732080 0 0 0 16 477 1555 0 0 100 0 0
Changes since v3:
- merge interval_count check and times check to one line.
- fix the wrong indent in stat.h
- use stat_config.times instead of 'times' in cmd_stat function.
Changes since v2:
- none.
Changes since v1:
- change the name of the new option "times-print" to "interval-count".
- keep the new option interval specifically.
Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1517217923-8302-2-git-send-email-ufo19890607@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support to display group output for if non grouped events are
detected and user forces --group option. Now for non-group events
recorded like:
$ perf record -e 'cycles,instructions' ls
you can still get group output by using --group option
in report:
$ perf report --group --stdio
...
# Overhead Command Shared Object Symbol
# ................ ....... ................ ......................
#
17.67% 0.00% ls libc-2.25.so [.] _IO_do_write@@GLIB
15.59% 25.94% ls ls [.] calculate_columns
15.41% 31.35% ls libc-2.25.so [.] __strcoll_l
...
Committer note:
We should improve on this by making sure that the first line states that
this is not a group, but since the user doesn't have to force group view
when really using grouped events (e.g. '{cycles,instructions}'), the
user better know what is being done...
Requested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180209092734.GB20449@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we have the time in, keep the events in time order.
Committer notes:
Trying to be more verbose, what actual effect this will have in this particular
case?
Before and after this patch shows the artifacts:
--- /tmp/before 2018-02-06 15:40:29.536411625 -0300
+++ /tmp/after 2018-02-06 15:40:51.963403599 -0300
@@ -5,34 +5,34 @@
2540 2540 1818 | gnome-terminal-
3489 3489 2540 | bash
32433 32433 3489 | perf
- 32434 32434 32433 | perf
+ 32434 32434 32433 | make
32441 32441 32434 | make
32514 32514 32441 | make
511 511 32514 | sh
- 512 512 511 | sh
+ 512 512 511 | install
<SNIP>
We don't have 'perf' calling 'perf' calling 'make', etc, the second
'perf' actually is 'make', i.e. there was reordering of the relevant
PERF_RECORD_COMM and PERF_RECORD_FORK records.
Ditto for sh/install later on.
Look for FORK and COMM meta events, for those tids:
# perf report -D | egrep 'PERF_RECORD_(FORK|COMM)' | egrep '3243[34]'
0 14774650990679 0x1a3cd8 [0x38]: PERF_RECORD_FORK(32433:32433):(3489:3489)
1 14774652080381 0x1d6568 [0x30]: PERF_RECORD_COMM exec: perf:32433/32433
1 14774742473340 0x1dbb48 [0x38]: PERF_RECORD_FORK(32434:32434):(32433:32433)
0 14774752005779 0x1a4af8 [0x30]: PERF_RECORD_COMM exec: make:32434/32434
0 14774753997960 0x1a5578 [0x38]: PERF_RECORD_FORK(32435:32435):(32434:32434)
0 14774756070782 0x1a5618 [0x38]: PERF_RECORD_FORK(32438:32438):(32434:32434)
0 14774757772939 0x1a5680 [0x38]: PERF_RECORD_FORK(32440:32440):(32434:32434)
0 14774758230600 0x1a56e8 [0x38]: PERF_RECORD_FORK(32441:32441):(32434:32434)
#
First column is the cpu, second is the timestamp.
So they are on different CPUs, thus ring buffers, and when we don't use
the ordered_events class, we end up mixing that up, use it to take
advantage of the PERF_RECORD_FINISHED_ROUND meta events to go on
ordering the events using the PERF_SAMPLE_TIME present in the
PERF_RECORD_{FORK,COMM,EXIT,SAMPLE,etc} records in the ring buffer.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180206181813.10943-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In commit 2f15bd8c6c ("perf tools: Fix "Command" sort_entry's cmp and
collapse function") we switched from pointer to string comparison.
But failed to remove related comments. Removing them and adding another
one to warn before pointer comparison in here.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180206181813.10943-18-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we strip the perf binary, dwarf unwind test stop
to work. The reason is that strip will remove static
function symbols, which we need to check for unwind.
This change will keep this test working in cases where
the global symbols are put into dynamic symbol table,
which is the case on x86. It still won't work on powerpc.
Making those 5 local functions global, and adding
'test_dwarf_unwind__' to their names.
Committer testing:
Before:
# perf test dwarf
58: DWARF unwind : Ok
# strip ~/bin/perf
# perf test dwarf
58: DWARF unwind : FAILED!
# perf test -v dwarf
58: DWARF unwind :
--- start ---
test child forked, pid 6590
unwind: thread map already set, dso=/home/acme/bin/perf
<SNIP>
unwind: access_mem addr 0x7ffce6c48098 val 48563f, offset 1144
unwind: test__dwarf_unwind:ip = 0x4a54e5 (0xa54e5)
got: test__dwarf_unwind 0xa54e5, expecting test__dwarf_unwind
unwind: '':ip = 0x4a50bb (0xa50bb)
failed: got unresolved address 0xa50bb
unwind failed
test child finished with -1
---- end ----
DWARF unwind: FAILED!
#
After:
# perf test dwarf
58: DWARF unwind : Ok
# strip ~/bin/perf
# perf test dwarf
58: DWARF unwind : Ok
#
# perf test -v dwarf
58: DWARF unwind :
--- start ---
test child forked, pid 7219
unwind: thread map already set, dso=/home/acme/bin/perf
<SNIP>
unwind: access_mem addr 0x7fff007da2c8 val 48575f, offset 1144
unwind: test__arch_unwind_sample:ip = 0x589044 (0x189044)
got: test__arch_unwind_sample 0x189044, expecting test__arch_unwind_sample
unwind: test_dwarf_unwind__thread:ip = 0x4a52f7 (0xa52f7)
got: test_dwarf_unwind__thread 0xa52f7, expecting test_dwarf_unwind__thread
unwind: test_dwarf_unwind__compare:ip = 0x4a5468 (0xa5468)
got: test_dwarf_unwind__compare 0xa5468, expecting test_dwarf_unwind__compare
unwind: bsearch:ip = 0x7f6608ae94d8 (0x394d8)
got: bsearch 0x394d8, expecting bsearch
unwind: test_dwarf_unwind__krava_3:ip = 0x4a54d1 (0xa54d1)
got: test_dwarf_unwind__krava_3 0xa54d1, expecting test_dwarf_unwind__krava_3
unwind: test_dwarf_unwind__krava_2:ip = 0x4a550b (0xa550b)
got: test_dwarf_unwind__krava_2 0xa550b, expecting test_dwarf_unwind__krava_2
unwind: test_dwarf_unwind__krava_1:ip = 0x4a554b (0xa554b)
got: test_dwarf_unwind__krava_1 0xa554b, expecting test_dwarf_unwind__krava_1
unwind: test__dwarf_unwind:ip = 0x4a5605 (0xa5605)
got: test__dwarf_unwind 0xa5605, expecting test__dwarf_unwind
test child finished with 0
---- end ----
DWARF unwind: Ok
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180206181813.10943-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no new-line after target-override warning, now:
$ perf record -a --per-thread
Warning:
SYSTEM/CPU switch overriding PER-THREAD^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.705 MB perf.data (2939 samples) ]
with patch:
$ perf record -a --per-thread
Warning:
SYSTEM/CPU switch overriding PER-THREAD
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.705 MB perf.data (2939 samples) ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 16ad2ffb82 ("perf tools: Introduce perf_target__strerror()")
Link: http://lkml.kernel.org/r/20180206181813.10943-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On Intel test case trace+probe_libc_inet_pton.sh succeeds and the
output is:
[root@f27 perf]# ./perf trace --no-syscalls
-e probe_libc:inet_pton/max-stack=3/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.037 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.037/0.037/0.037/0.000 ms
0.000 probe_libc:inet_pton:(7fa40ac618a0))
__GI___inet_pton (/usr/lib64/libc-2.26.so)
getaddrinfo (/usr/lib64/libc-2.26.so)
main (/usr/bin/ping)
The kernel stack unwinder is used, it is specified implicitly
as call-graph=fp (frame pointer).
On s390x only dwarf is available for stack unwinding. It is also
done in user space. This requires different parameter setup
and result checking for s390x and Intel.
This patch adds separate perf trace setup and result checking
for Intel and s390x. On s390x specify this command line to
get a call-graph and handle the different call graph result
checking:
[root@s35lp76 perf]# ./perf trace --no-syscalls
-e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.041 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.041/0.041/0.041/0.000 ms
0.000 probe_libc:inet_pton:(3ffb9942060))
__GI___inet_pton (/usr/lib64/libc-2.26.so)
gaih_inet (inlined)
__GI_getaddrinfo (inlined)
main (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
_start (/usr/bin/ping)
[root@s35lp76 perf]#
Before:
[root@s8360047 perf]# ./perf test -vv 58
58: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 26349
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.079 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.079/0.079/0.079/0.000 ms
0.000 probe_libc:inet_pton:(3ff925c2060))
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
[root@s8360047 perf]#
After:
[root@s35lp76 perf]# ./perf test -vv 57
57: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 38708
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.038 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.038/0.038/0.038/0.000 ms
0.000 probe_libc:inet_pton:(3ff87342060))
__GI___inet_pton (/usr/lib64/libc-2.26.so)
gaih_inet (inlined)
__GI_getaddrinfo (inlined)
main (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
_start (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
[root@s35lp76 perf]#
On Intel the test case runs unchanged and succeeds.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180117083831.101001-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the --force option to the man page.
Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1517831315-31490-1-git-send-email-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The latency of perf_top__mmap_read() should be lower than refresh time.
If not, give some hints to reduce the latency.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1516310792-208685-18-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_top__mmap_read() has a severe performance issue in the Knights
Landing/Mill platform, when monitoring heavy load systems. It costs
several minutes to finish, which is unacceptable.
Currently, 'perf top' uses the non overwrite mode. For non overwrite
mode, it tries to read everything in the ringbuffer and doesn't pause
it. Once there are lots of samples delivered persistently, the
processing time could be very long. Also, the latest samples could be
lost when the ringbuffer is full.
For overwrite mode, it takes a snapshot for the system by pausing the
ringbuffer, which could significantly reduce the processing time. Also,
the overwrite mode always keep the latest samples. Considering the real
time requirement for 'perf top', the overwrite mode is more suitable for
it.
Actually, 'perf top' was overwrite mode. It is changed to non overwrite
mode since commit 93fc64f144 ("perf top: Switch to non overwrite
mode"). It's better to change it back to overwrite mode by default.
For the kernel which doesn't support overwrite mode, it will fall back
to non overwrite mode.
There would be some records lost in overwrite mode because of pausing
the ringbuffer. It has little impact for the accuracy of the snapshot
and can be tolerated.
For overwrite mode, unconditionally wait 100 ms before each snapshot. It
also reduces the overhead caused by pausing ringbuffer, especially on
light load system.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1516310792-208685-17-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There would be some records lost in overwrite mode because of pausing
the ringbuffer. It has little impact for the accuracy of the snapshot
and could be tolerated by 'perf top'.
Remove the lost events checking.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1516310792-208685-16-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For overwrite mode, the ringbuffer will be paused. The event lost is
expected. It needs a way to notify the browser not print the warning.
It will be used later for perf top to disable lost event warning in
overwrite mode. There is no behavior change for now.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1516310792-208685-15-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch to non-overwrite mode if kernel doesnot support overwrite
ringbuffer.
It's only effect when overwrite mode is supported. No change to current
behavior.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1516310792-208685-14-git-send-email-kan.liang@intel.com
[ Use perf_missing_features.write_backward instead of the non merged is_write_backward_fail() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As tools may need to adjust to missing features, as 'perf top' will, in
the next csets, to cope with a missing 'write_backward' feature.
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-jelngl9q1ooaizvkcput9tic@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Per-event overwrite term is not forbidden in 'perf top', which can bring
problems. Because 'perf top' only support non-overwrite mode now.
Add new rules and check regarding to overwrite term for 'perf top'.
- All events either have same per-event term or don't have per-event
mode setting. Otherwise, it will error out.
- Per-event overwrite term should be consistent as opts->overwrite.
If not, updating the opts->overwrite according to per-event term.
Make it possible to support either non-overwrite or overwrite mode.
The overwrite mode is forbidden now, which will be removed when the
overwrite mode is supported later.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1516310792-208685-12-git-send-email-kan.liang@intel.com
[ Renamed perf_top_overwrite_check to perf_top__overwrite_check, to follow existing convention ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Discards perf_mmap__read_backward() and perf_mmap__read_catchup(). No
tools use them.
There are tools still use perf_mmap__read_forward(). Keep it, but add
comments to point to the new interface for future use.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1516310792-208685-11-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the new perf_mmap__read_* interfaces for overwrite ringbuffer test.
Commiter notes:
Testing:
[root@seventh ~]# perf test -v backward
48: Read backward ring buffer :
--- start ---
test child forked, pid 8309
Using CPUID GenuineIntel-6-9E
mmap size 1052672B
mmap size 8192B
Finished reading overwrite ring buffer: rewind
test child finished with 0
---- end ----
Read backward ring buffer: Ok
[root@seventh ~]#
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1516310792-208685-10-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Except for 'perf record', the other perf tools read events one by one
from the ring buffer using perf_mmap__read_forward(). But it only
supports non-overwrite mode.
Introduce perf_mmap__read_event() to support both non-overwrite and
overwrite mode.
Usage:
perf_mmap__read_init()
while(event = perf_mmap__read_event()) {
//process the event
perf_mmap__consume()
}
perf_mmap__read_done()
It cannot use perf_mmap__read_backward(). Because it always reads the
stale buffer which is already processed. Furthermore, the forward and
backward concepts have been removed. The perf_mmap__read_backward() will
be replaced and discarded later.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1516310792-208685-9-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The direction of overwrite mode is backward. The last perf_mmap__read()
will set tail to map->prev. Need to correct the map->prev to head which
is the end of next read.
It will be used later.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1516310792-208685-8-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'start' and 'prev' variables are duplicates in perf_mmap__read().
Use 'map->prev' to replace 'start' in perf_mmap__read_*().
Suggested-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1516310792-208685-7-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Improve the readability by using meaningful enum (-EAGAIN, -EINVAL and
0) to replace the three returning states (0, -1 and 1).
Suggested-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1516310792-208685-6-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new function perf_mmap__read_init() is factored out from
perf_mmap__push().
It is to calculate the 'start' and 'end' of the available data in
ringbuffer.
No functional change.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1516310792-208685-5-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The first assignment for 'start' and 'end' is redundant.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1516310792-208685-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In perf_mmap__push(), the 'size' need to be recalculated, otherwise the
invalid data might be pushed to the record in overwrite mode.
The issue is introduced by commit 7fb4b407a1 ("perf mmap: Don't
discard prev in backward mode").
When the ring buffer is full in overwrite mode, backward_rb_find_range()
will be called to recalculate the 'start' and 'end'. The 'size' needs to
be recalculated accordingly.
Unconditionally recalculate the 'size', not just for full ring buffer in
overwrite mode. Because:
- There is no harmful to recalculate the 'size' for other cases.
- The code of calculating 'start' and 'end' will be factored out later.
The new function does not need to return 'size'.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 7fb4b407a1 ("perf mmap: Don't discard prev in backward mode")
Link: http://lkml.kernel.org/r/1516310792-208685-3-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__mmap_read_catchup() and perf_evlist__mmap_read_backward()
are only for overwrite mode.
But they read the evlist->mmap buffer which is for non-overwrite mode.
It did not bring any serious problem yet, because there is no one use
it.
Remove the unused interfaces.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1516310792-208685-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add JSON metrics for ARM Cortex-A53 Processor.
Unlike the Intel processors there isn't a script that automatically
generated these files. The patch was manually generated from the
documentation and the previous oprofile ARM Cortex ac53 event file patch
I made.
The relevant documentation is in the "12.9 Events" section of the ARM
Cortex A53 MPCore Processor Revision: r0p4 Technical Reference Manual.
The ARM Cortex A53 manual is available at:
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0500g/DDI0500G_cortex_a53_trm.pdf
Use that to look for additional information about the events.
Signed-off-by: William Cohen <wcohen@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180131032813.9564-1-wcohen@redhat.com
[ Added references provided by William Cohen ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No functionality changes.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20180130053053.13214-2-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stephane reported that we don't set properly PERIOD sample type for
events with period term defined.
Before:
$ perf record -e cpu/cpu-cycles,period=1000/u ls
$ perf evlist -v
cpu/cpu-cycles,period=1000/u: ... sample_type: IP|TID|TIME|PERIOD, ...
After:
$ perf record -e cpu/cpu-cycles,period=1000/u ls
$ perf evlist -v
cpu/cpu-cycles,period=1000/u: ... sample_type: IP|TID|TIME, ...
Setting PERIOD sample type based on period term setup.
Committer note:
When we use -c or a period=N term in the event definition, then we don't
need to ask the kernel, for this event, via perf_event_attr.sample_type
|= PERF_SAMPLE_PERIOD, to put the event period in each sample for this
event, as we know it already, it is in perf_event_attr.sample_period.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180201083812.11359-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To resolve some header conflicts that were preventing the build to
succeed in the Alpine Linux distribution.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-bvud0dvzvip3kibeplupdbmc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not needed there, fixup the places where it is needed and was getting
only by luck via evlist.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-yxjpetn64z8vjuguu84gr6x6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were calculating the delta from a in-flight syscall that got its
output interrupted by another syscall, which doesn't seem like useful
information, we will print the syscall duration (sys_exit - sys_enter)
when the raw_syscalls:sys_exit event happens.
The problem here is how we're consuming the multiple ring buffers,
without using the ordered_events code used by perf_session, which may
cause some reordering of syscalls for diferent CPUs, so just stop
printing that delta, to avoid things like:
# trace --print-sample -p 9626 -e futex
raw_syscalls:sys_enter 411967179.269 Timer 9609/9626 [2]
raw_syscalls:sys_enter 411967179.213 file:// Content 9609/9609 [3]
328.038 (18446744073709.496 ms): Timer/9626 futex(uaddr: 0x7fc0d4027044, op: WAIT|PRIV, utime: 0x7fc0b0ffdb50 ) ...
raw_syscalls:sys_exit 411967179.225 file:// Content 9609/9609 [3]
327.982 ( 0.012 ms): file:// Conten/9609 futex(uaddr: 0x7fc0d4027040, op: WAKE|PRIV, val: 1 ) = 1
This is a bandaid, we should better try and use the ordered_events code,
possibly with some refactoring prep work, but for now at least we don't
show those false long deltas for the lines ending in '...'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-q6xgsqrju1sr6ltud9kjjhmb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help with debugging, like the interrupted out of order issue that
will be dealt with in the next patch in this series, changing the code
to deal with:
raw_syscalls:sys_enter 411967179.269 Timer 9609/9626 [2]
raw_syscalls:sys_enter 411967179.213 file:// Content 9609/9609 [3]
328.038 (18446744073709.496 ms): Timer/9626 futex(uaddr: 0x7fc0d4027044, op: WAIT|PRIV, utime: 0x7fc0b0ffdb50 ) ...
raw_syscalls:sys_exit 411967179.225 file:// Content 9609/9609 [3]
327.982 ( 0.012 ms): file:// Conten/9609 futex(uaddr: 0x7fc0d4027040, op: WAKE|PRIV, val: 1 ) = 1
That long duration is the bug.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-fljqiibjn7wet24jd1ed7abc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bpf__setup_stdout() function uses that evlist argument, remove the
misleading __maybe_unused attribute.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-7vbhhzbd33nvdm7l35gdfryt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Once decoded from trace packets information on trace range needs
to be communicated to the perf synthesis infrastructure so that it
is available to the perf tools built-in rendering tools and scripts.
Co-authored-by: Tor Jeremiassen <tor@ti.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1516211539-5166-10-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds support for complete packet decoding, allowing traces
collected during a trace session to be decoder from the "report"
infrastructure.
Co-authored-by: Tor Jeremiassen <tor@ti.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1516211539-5166-9-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add functionatlity to setup trace queues so that traces associated with
CoreSight auxtrace events found in the perf.data file can be classified
properly. The decoder and memory callback associated with each queue are
then used to decode the traces that have been assigned to that queue.
Co-authored-by: Tor Jeremiassen <tor@ti.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1516211539-5166-8-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds functions to communicate with the openCSD trace decoder,
more specifically to access program memory, fetch trace packets and
reset the decoder.
Co-authored-by: Tor Jeremiassen <tor@ti.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1516211539-5166-7-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding functionality to create a CoreSight trace decoder capable
of decoding trace data pushed by a client application.
Co-authored-by: Tor Jeremiassen <tor@ti.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1516211539-5166-6-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the required interface to the openCSD library to support
dumping CoreSight trace packet using the "report --dump" command. The
information conveyed is related to the type of packets gathered by a
trace session rather than full decoding.
Co-authored-by: Tor Jeremiassen <tor@ti.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1516211539-5166-5-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The auxtrace_info section contains metadata that describes the number of
trace capable CPUs, their ETM version and trace configuration, including
trace id values. This information is required by the trace decoder in
order to properly decode the compressed trace packets. This patch adds
code to read and parse this metadata, and store it for use in
configuring instances of the cs-etm trace decoder.
Co-authored-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Tor Jeremiassen <tor@ti.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1516211539-5166-4-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the entry point for CoreSight trace decoding, serving as
a jumping board for furhter expansions.
Co-authored-by: Tor Jeremiassen <tor@ti.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1516211539-5166-3-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Open CoreSight Decoding Library (openCSD) is a free and open library
to decode traces collected by the CoreSight hardware infrastructure.
This patch adds the required mechanic to recognise the presence of the
openCSD library on a system and set up miscellaneous flags to be used in
the compilation of the trace decoding feature.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: http://lkml.kernel.org/r/1516211539-5166-2-git-send-email-mathieu.poirier@linaro.org
Link: http://lkml.kernel.org/r/1516635644-24819-1-git-send-email-mathieu.poirier@linaro.org
[ Merged missing test-libopencsd.c file, provided later by Mathieu ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change the Makefile and build process to no longer require audit-libs
interfaces when the architecture provides system call tables.
Committer notes:
Its not enough to hook into the NO_LIBAUDIT makefile block, we need to
define a CONFIG_TRACE that gets selected by both architectures
generating the syscall tables from the kernel headers and from detecting
the availability of libaudit.
With that in place we will not link against libaudit even if the
necessary files are available for that, in fact we will not even try to
detect its availability, speeding up a bit the feature detection phase.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: linux-s390@vger.kernel.org
LPU-Reference: 1516352177-11106-6-git-send-email-brueckner@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-j68lub6ipm8apvy52vd3l4cm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replace the errno_to_name() from the audit-libs with the newly
introduced arch_syscalls__strerrno() function.
With this change:
1. With replacing errno_to_name() from audit-libs, perf trace
does no longer require audit-lib interfaces.
2. In addition to 1, the audit-libs dependency can be removed
for architectures that support syscall tables in perf.
This is achieved in a follow-up commit.
3. With the architecture specific errno number/name mapping,
perf trace reports can work across architectures.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: linux-s390@vger.kernel.org
LPU-Reference: 1516352177-11106-5-git-send-email-brueckner@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-xjvoqzhwmu4wn4kl9ng11rvs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a script that generates a mapping of errno numbers to their
names for each architecture that is supported by perf (i.e. has a
subdirectory in tools/perf/arch/).
The errno mapping is generated as part of the trace beautifiers and can
be used by including the trace/beauty/arch_errno_names.c file. Then,
use arch_syscalls__strerrno() to look up an errno value to obtain the
errno name (e.g. ENOENT) for a particular architecture.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: linux-s390@vger.kernel.org
LPU-Reference: 1516352177-11106-4-git-send-email-brueckner@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-8zlsjnuoep2ww39aq5z41fno@git.kernel.org
[ Make x86 be the first arch, most common, add newline to last line, fixing build on centos:5 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a pre-req to generate an architecture specific mapping of errno
numbers to their names. This errno mapping can be used by perf trace to
support cross-architecture trace reports and to get rid of the
audit-libs dependency.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: linux-s390@vger.kernel.org
LPU-Reference: 1516352177-11106-3-git-send-email-brueckner@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-q13ystrw4sjz4wyvd3654cnm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For each arch in tools/perf/arch, grab a copy of errno.h.
This is a pre-req to generate an architecture specific mapping of errno
numbers to their names. This errno mapping can be used by perf trace to
support cross-architecture trace reports and to get rid of the
audit-libs dependency.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: linux-s390@vger.kernel.org
LPU-Reference: 1516352177-11106-2-git-send-email-brueckner@linux.vnet.ibm.com
Link: https://lkml.kernel.org/n/tip-73azjhrzpjsskwi129020i2u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display the state of the rest of the features (FEATURE_TESTS_EXTRA) on a
'make VF=1' build. These features are detected manually by perf's
Makefile.config so they can't be displayed with the main list, but only
after we're done in Makefile.config.
$ make VF=1
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
SNIP
... timerfd: [ on ]
... sched_getcpu: [ on ]
... sdt: [ on ]
... setns: [ on ]
extra features:
... bionic: [ OFF ]
... compile-32: [ on ]
... compile-x32: [ OFF ]
... cplus-demangle: [ on ]
... hello: [ OFF ]
... libbabeltrace: [ on ]
... liberty: [ on ]
... liberty-z: [ on ]
... libunwind-debug-frame: [ OFF ]
... libunwind-debug-frame-arm: [ OFF ]
... libunwind-debug-frame-aarch64: [ OFF ]
SNIP
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180109092646.GB11520@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit (93d10af26b perf tools: Optimize sample parsing for ordered
events) breaks intelPT trace decoding by invariably returning an error
if the event type isn't a PERF_SAMPLE_TIME.
With this patch the timestamp is initialised and processing is allowed
to continue if the error returned by function
perf_evlist__parse_sample_timestamp() is not a fault.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 93d10af26b ("perf tools: Optimize sample parsing for ordered events")
Link: http://lkml.kernel.org/r/1515616312-27645-1-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I've meet a strange behavior with these commands on my gentoo box:
1: perf kmem record
2: CTRL-C to stop 1
3: perf report
4: "Enter", "Enter", "Run scripts for all samples",
"event_analyzing_sample".
Then 'perf report' says:
"
No kallsyms or vmlinux with build-id xxxx was found
/lib/modules/4.10.0+/build/vmlinux with build id xxxx not found,
continuing without symbols
".
It is strange because I am sure /lib/modules/4.10.0+/build/vmlinux is
right for perf.data.
After digging, I found out the reason is that "perf report" generates
many open fds, then "script_browse" uses popen to run "perf script"
which run out of open files.
The gentoo box has a small default value for "max open files", 1024.
Yes, "ulimit -n " with a bigger number could fix it, but I think that
using O_CLOEXEC in do_open is a better way.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180115050448.GA20759@udknight
[ Make sure O_CLOEXEC is available in old systems by adding a patch
just before this one, to keep this bisectable in such systems ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be more generally available and get the build on centos:5 to
work after we use O_CLOEXEC in the next patch, in the util/dso.c file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wang YanQing <udknight@gmail.com>
Link: https://lkml.kernel.org/n/tip-vsjbiydh15pfqomxw1kx64ex@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can get it working for TUI, where using just pr_err() would
end up making the message emitted to stderr to be erased by the TUI exit
routine restoring the terminal to its previous state.
Now we can see that trying to use a tracepoint field as one of the
--field entries isn't working:
# perf top --stdio --no-children -e syscalls:sys_enter_write --fields pid,sym,count
Error:
Unknown --fields key: `count'
Usage: perf top [<options>]
--fields <key[,keys...]>
output field(s): overhead, period, sample plus all of sort keys
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-usy9hhy7umdd4bbblkn63t8w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is never a need to synthesize a 'swapped' sample, so all callers
to perf_event__synthesize_sample() pass 'false' as the value to
'swapped'. So get rid of the unused 'swapped' parameter.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1516108492-21401-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PERF_SAMPLE_CPU contains the cpu number in the first 4 bytes and the
second 4 bytes are reserved. Ensure the reserved bytes are zero in
perf_event__synthesize_sample().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1516108492-21401-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both 'perf inject' and internal tools consume cpu endian samples, so
there is never a need to do any swapping when synthesizing samples.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1516108492-21401-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In x86 architecture dependend part function get_cpuid_str() mallocs a
128 byte buffer, but does not check if the memory allocation succeeded
or not.
When the memory allocation fails, function __get_cpuid() is called with
first parameter being a NULL pointer. However this function references
its first parameter and operates on a NULL pointer which might cause
core dumps.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180117131611.34319-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously it was only allowed to use at most 10 time slices in 'perf
script --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf script --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-9-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously it was only allowed to use at most 10 time slices in 'perf
report --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf report --stdio --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-8-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously we use a magic number 10 to limit the number of time slices.
It's not very good.
This patch creates a new function perf_time__range_alloc() to allocate
time slices buffer. The number of buffer entries is determined by the
number of comma in string but at least it will allocate one entry even
if no comma is found.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-7-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a time slices indication to the perf report header.
For example,
# perf report --stdio --time 10%
# Total Lost Samples: 0
#
# Samples: 9K of event 'cycles:ppp' (time slices: 10%)
# Event count (approx.): 8951288803
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested--by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-6-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously, the time percent slice needs an index to specify which one
the user wants.
It may be easier to use if the index can be omitted. So with this
patch, for example,
perf report --stdio --time 10%/1 should be equivalent to
perf report --stdio --time 10%
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-5-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The command line like 'perf report --stdio --time 1abc%/1' could be
accepted by perf. It looks not very good.
This patch uses strtod() to replace original atof() and check the entire
string. Now for the same command line, it would return error message
"Invalid time string".
root@skl:/tmp# perf report --stdio --time 1abc%/1
Invalid time string
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following message will be returned to user when executing 'perf
script --time' if perf data file doesn't contain the first/last sample
time.
"HINT: no first/last sample time found in perf data.
Please use latest perf binary to execute 'perf record'
(if '--buildid-all' is enabled, needs to set '--timestamp-boundary')."
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following message will be returned to user when executing
'perf report --time' if perf data file doesn't contain the
first/last sample time.
"HINT: no first/last sample time found in perf data.
Please use latest perf binary to execute 'perf record'
(if '--buildid-all' is enabled, needs to set '--timestamp-boundary')."
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we use a global DWARF setting as in:
perf record --call-graph dwarf
According to 5c0cf22477 ("perf record: Store data mmaps for dwarf unwind") we need
to set up some extra perf_event_attr bits.
But when we instead do a per event dwarf setting:
perf record -e cycles/call-graph=dwarf/
This was not being done, make them equivalent.
This didn't produce any output changes in my tests while fixing up loose
ends in the per-event settings, I found it just by comparing the
perf_event_attr fields trying to find an explanation for those problems.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-6476r53h2o38skbs9qa4ust4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we use:
perf trace --max-stack=4
then the syscall events will use DWARF callchains, when available
(libunwind enabled in the build) and the printing will stop at 4 levels.
When we introduced support for tracepoint events this ended up not
applying for them, fix it.
Before:
# perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.058 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.058/0.058/0.058/0.000 ms
0.000 probe_libc:inet_pton:(7fc6c2a16350))
#
After:
# perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.087 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.087/0.087/0.087/0.000 ms
0.000 probe_libc:inet_pton:(7fbf9a041350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa947cb67f3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa947cb68379] (/usr/bin/ping)
#
Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-afsu9eegd43ppihiuafhh9qv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When setting up DWARF callchains on specific events, without using
'record' or 'trace' --call-graph, but instead doing it like:
perf trace -e cycles/call-graph=dwarf/
The unwind__prepare_access() call in thread__insert_map() when we
process PERF_RECORD_MMAP(2) metadata events were not being performed,
precluding us from using per-event DWARF callchains, handling them just
when we asked for all events to be DWARF, using "--call-graph dwarf".
We do it in the PERF_RECORD_MMAP because we have to look at one of the
executable maps to figure out the executable type (64-bit, 32-bit) of
the DSO laid out in that mmap. Also to look at the architecture where
the perf.data file was recorded.
All this probably should be deferred to when we process a sample for
some thread that has callchains, so that we do this processing only for
the threads with samples, not for all of them.
For now, fix using DWARF on specific events.
Before:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.048 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.048/0.048/0.048/0.000 ms
0.000 probe_libc:inet_pton:(7fe9597bb350))
Problem processing probe_libc:inet_pton callchain, skipping...
#
After:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.060 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.060/0.060/0.060/0.000 ms
0.000 probe_libc:inet_pton:(7fd4aa930350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa804e51af3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa804e51b379] (/usr/bin/ping)
#
# perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.057 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms
0.000 probe_libc:inet_pton:(7f9363b9e350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffa9e8a14e0f3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffa9e8a14e1379] (/usr/bin/ping)
#
# perf trace --call-graph=fp --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.077 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.077/0.077/0.077/0.000 ms
0.000 probe_libc:inet_pton:(7f4947e1c350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa716d88ef3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa716d88f379] (/usr/bin/ping)
#
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=fp/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.078 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.078/0.078/0.078/0.000 ms
0.000 probe_libc:inet_pton:(7fa157696350))
__GI___inet_pton (/usr/lib64/libc-2.26.so)
getaddrinfo (/usr/lib64/libc-2.26.so)
[0xffffa9ba39c74f40] (/usr/bin/ping)
#
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/20180116182650.GE16107@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When setting the "dwarf" unwinder for a specific event and not
specifying the max-stack, the attr.sample_max_stack ended up using an
uninitialized callchain_param.max_stack, fix it by using designated
initializers for that callchain_param variable, zeroing all non
explicitely initialized struct members.
Here is what happened:
# perf trace -vv --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
callchain: type DWARF
callchain: stack dump size 8192
perf_event_attr:
type 2
size 112
config 0x730
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|ADDR|CALLCHAIN|CPU|PERIOD|RAW|REGS_USER|STACK_USER|DATA_SRC
exclude_callchain_user 1
{ wakeup_events, wakeup_watermark } 1
sample_regs_user 0xff0fff
sample_stack_user 8192
sample_max_stack 50656
sys_perf_event_open failed, error -75
Value too large for defined data type
# perf trace -vv --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
callchain: type DWARF
callchain: stack dump size 8192
perf_event_attr:
type 2
size 112
config 0x730
sample_type IP|TID|TIME|ADDR|CALLCHAIN|CPU|PERIOD|RAW|REGS_USER|STACK_USER|DATA_SRC
exclude_callchain_user 1
sample_regs_user 0xff0fff
sample_stack_user 8192
sample_max_stack 30448
sys_perf_event_open failed, error -75
Value too large for defined data type
#
Now the attr.sample_max_stack is set to zero and the above works as
expected:
# perf trace --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.072 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.072/0.072/0.072/0.000 ms
0.000 probe_libc:inet_pton:(7feb7a998350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa39b6108f3f] (/usr/bin/ping)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-is9tramondqa9jlxxsgcm9iz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf record' and 'perf report --dump-raw-trace' supported in this
release.
Example usage:
# perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000
# perf report --dump-raw-trace
Note that the perf.data file is portable, so the report can be run on
another architecture host if necessary.
Output will contain raw SPE data and its textual representation, such
as:
0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000 offset: 0 ref: 0x1891ad0e idx: 1 tid: 2227 cpu: 1
.
. ... ARM SPE data: size 2097152 bytes
. 00000000: 49 00 LD
. 00000002: b2 c0 3b 29 0f 00 00 ff ff VA 0xffff00000f293bc0
. 0000000b: b3 c0 eb 24 fb 00 00 00 80 PA 0xfb24ebc0 ns=1
. 00000014: 9a 00 00 LAT 0 XLAT
. 00000017: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS
. 00000019: b0 00 c4 15 08 00 00 ff ff PC 0xff00000815c400 el3 ns=1
. 00000022: 98 00 00 LAT 0 TOT
. 00000025: 71 36 6c 21 2c 09 00 00 00 TS 39395093558
. 0000002e: 49 00 LD
. 00000030: b2 80 3c 29 0f 00 00 ff ff VA 0xffff00000f293c80
. 00000039: b3 80 ec 24 fb 00 00 00 80 PA 0xfb24ec80 ns=1
. 00000042: 9a 00 00 LAT 0 XLAT
. 00000045: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS
. 00000047: b0 f4 11 16 08 00 00 ff ff PC 0xff0000081611f4 el3 ns=1
. 00000050: 98 00 00 LAT 0 TOT
. 00000053: 71 36 6c 21 2c 09 00 00 00 TS 39395093558
. 0000005c: 48 00 INSN-OTHER
. 0000005e: 42 02 EV RETIRED
. 00000060: b0 2c ef 7f 08 00 00 ff ff PC 0xff0000087fef2c el3 ns=1
. 00000069: 98 00 00 LAT 0 TOT
. 0000006c: 71 d1 6f 21 2c 09 00 00 00 TS 39395094481
...
Other release notes:
- applies to acme's perf/{core,urgent} branches, likely elsewhere
- Report is self-contained within the tool.
Record requires enabling the kernel SPE driver by
setting CONFIG_ARM_SPE_PMU.
- The intel-bts implementation was used as a starting point; its
min/default/max buffer sizes and power of 2 pages granularity need to be
revisited for ARM SPE
- Recording across multiple SPE clusters/domains not supported
- Snapshot support (record -S), and conversion to native perf events
(e.g., via 'perf inject --itrace'), are also not supported
- Technically both cs-etm and spe can be used simultaneously, however
disabled for simplicity in this release
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The raw_syscalls:sys_{enter,exit} were first supported in 'perf trace',
together with minor and major page faults, then we supported
--call-graph, then --max-stack, but when the other tracepoints got
supported, and bpf, etc, I forgot to make those global call-graph
settings apply to them.
Fix it by realizing that the global --max-stack and --call-graph
settings are done via:
OPT_CALLBACK(0, "call-graph", &trace.opts,
"record_mode[,record_size]", record_callchain_help,
&record_parse_callchain_opt),
And then, when we go to parse the events in -e via:
OPT_CALLBACK('e', "event", &trace, "event",
"event/syscall selector. use 'perf list' to list available events",
trace__parse_events_option),
And trace__parse_sevents_option() calls:
struct option o = OPT_CALLBACK('e', "event", &trace->evlist, "event",
"event selector. use 'perf list' to list available events",
parse_events_option);
err = parse_events_option(&o, lists[0], 0);
parse_events_option() will override the global --call-graph and
--max-stack if the "call-graph" and/or "max-stack" terms are in the
event definition, such as in the probe_libc:inet_pton event in one of the
examples below (-e probe_libc:inet_pton/max-stack=2).
Before:
# perf trace --mmap 1024 --call-graph dwarf -e sendto,probe_libc:inet_pton ping -6 -c 1 ::1
1.525 ( ): probe_libc:inet_pton:(7f77f3ac9350))
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.071 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.071/0.071/0.071/0.000 ms
1.677 ( 0.081 ms): ping/31296 sendto(fd: 3, buff: 0x55681b652720, len: 64, addr: 0x55681b650640, addr_len: 28) = 64
__libc_sendto (/usr/lib64/libc-2.26.so)
[0xffffaa97e4bc9cef] (/usr/bin/ping)
[0xffffaa97e4bc656d] (/usr/bin/ping)
[0xffffaa97e4bc7d0a] (/usr/bin/ping)
[0xffffaa97e4bca447] (/usr/bin/ping)
[0xffffaa97e4bc2f91] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa97e4bc3379] (/usr/bin/ping)
#
After:
# perf trace --mmap 1024 --call-graph dwarf -e sendto,probe_libc:inet_pton ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.089 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.089/0.089/0.089/0.000 ms
1.955 ( ): probe_libc:inet_pton:(7f383a311350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa5d91444f3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa5d91445379] (/usr/bin/ping)
2.140 ( 0.101 ms): ping/32047 sendto(fd: 3, buff: 0x55a26edd0720, len: 64, addr: 0x55a26edce640, addr_len: 28) = 64
__libc_sendto (/usr/lib64/libc-2.26.so)
[0xffffaa5d9144bcef] (/usr/bin/ping)
[0xffffaa5d9144856d] (/usr/bin/ping)
[0xffffaa5d91449d0a] (/usr/bin/ping)
[0xffffaa5d9144c447] (/usr/bin/ping)
[0xffffaa5d91444f91] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa5d91445379] (/usr/bin/ping)
#
Same thing for --max-stack, the global one:
# perf trace --max-stack 3 -e sendto,probe_libc:inet_pton ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.097 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.097/0.097/0.097/0.000 ms
1.577 ( ): probe_libc:inet_pton:(7f32f3957350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
1.738 ( 0.108 ms): ping/32103 sendto(fd: 3, buff: 0x55c3132d7720, len: 64, addr: 0x55c3132d5640, addr_len: 28) = 64
__libc_sendto (/usr/lib64/libc-2.26.so)
[0xffffaa3cecf44cef] (/usr/bin/ping)
[0xffffaa3cecf4156d] (/usr/bin/ping)
#
And then setting up a global setting (dwarf, max-stack=4), that will
affect the raw_syscall:sys_enter for the 'sendto' syscall and that will
be overriden in the probe_libc:inet_pton call to just one entry.
# perf trace --max-stack=4 --call-graph dwarf -e sendto -e probe_libc:inet_pton/max-stack=1/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.090 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.090/0.090/0.090/0.000 ms
2.140 ( ): probe_libc:inet_pton:(7f9fe9337350))
__GI___inet_pton (/usr/lib64/libc-2.26.so)
2.283 ( 0.103 ms): ping/31804 sendto(fd: 3, buff: 0x55c7f3e19720, len: 64, addr: 0x55c7f3e17640, addr_len: 28) = 64
__libc_sendto (/usr/lib64/libc-2.26.so)
[0xffffaa380c402cef] (/usr/bin/ping)
[0xffffaa380c3ff56d] (/usr/bin/ping)
[0xffffaa380c400d0a] (/usr/bin/ping)
#
Install iputils-debuginfo to get those /usr/bin/ping addresses resolved,
those routines are not on its .dymsym nor .symtab :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-qgl2gse8elhh9zztw4ajopg3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The construct:
if (callchain_param)
perf_evsel__config_callchain(evsel, opts, &callchain_param);
happens in several places, so make perf_evsel__config_callchain() work
just like free(NULL), do nothing if param->enabled is not set.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ykk0qzxnxwx3o611ctjnmxav@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to increase output offset in each iteration, not decrease it as
we currently do.
I guess we were lucky to finish in most cases in first iteration, so the
bug never showed. However it shows a lot when working with big (~4GB)
size data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 9c9f5a2f19 ("perf tools: Introduce copyfile_offset() function")
Link: http://lkml.kernel.org/r/20180109133923.25406-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 75562573ba ("perf tools: Add support for
PERF_SAMPLE_IDENTIFIER") we don't need explicitely set
PERF_SAMPLE_IDENTIFIER, as perf_evlist__config() will do this for us,
i.e. when there are more than one evsel in an evlist, it will check if
some evsel has a sample_type different than the one on the first evsel
in the list, setting PERF_SAMPLE_IDENTIFIER in that case.
So, to simplify 'perf trace' codebase, ditch that check.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-12xq6orhwttee2tdtu96ucrp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There could be different types of memory in the system. E.g normal
System Memory, Persistent Memory. To understand how the workload maps to
those memories, it's important to know the I/O statistics of them. Perf
can collect physical addresses, but those are raw data. It still needs
extra work to resolve the physical addresses. Provide a script to
facilitate the physical addresses resolving and I/O statistics.
Profile with MEM_INST_RETIRED.ALL_LOADS or MEM_UOPS_RETIRED.ALL_LOADS
event if any of them is available.
Look up the /proc/iomem and resolve the physical address. Provide
memory type summary.
Here is an example output:
# perf script report mem-phys-addr
Event: mem_inst_retired.all_loads:P
Memory type count percentage
---------------------------------------- ----------- -----------
System RAM 74 53.2%
Persistent Memory 55 39.6%
N/A
---
Changes since V2:
- Apply the new license rules.
- Add comments for globals
Changes since V1:
- Do not mix DLA and Load Latency. Do not compare the loads and stores.
Only profile the loads.
- Use event name to replace the RAW event
Signed-off-by: Kan Liang <Kan.liang@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lkml.kernel.org/r/1515099595-34770-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180111155020.9782-1-luisbg@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit ("d0565132605f perf evsel: Enable type checking for
perf_evsel_config_term types") assumes PERF_EVSEL__CONFIG_TERM_DRV_CFG
isn't used and as such adds a BUG_ON().
Since the enumeration type is used in macro ADD_CONFIG_TERM() the change
break CoreSight trace acquisition.
This patch restores the original code.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: d056513260 ("perf evsel: Enable type checking for perf_evsel_config_term types")
Link: http://lkml.kernel.org/r/1515617211-32024-1-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to --tasks, producing the same output plus /proc/<PID>/maps
similar lines for each mmap record present in a perf.data file.
Please note that not all mmaps are stored, for instance, some of the
non-executable mmaps are only stored when 'perf record --data' is used,
when the user wants to resolve data accesses in addition to asking for
executable mmaps to get the DSO with symtabs.
E.g.:
# perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data (7 samples) ]
[root@jouet ~]# perf report --mmaps
# pid tid ppid comm
0 0 -1 |swapper
4137 4137 -1 |sleep
5628a35a1000-5628a37aa000 r-xp 00000000 3147148 /usr/bin/sleep
7fb65ad51000-7fb65b134000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so
7fb65b134000-7fb65b35e000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so
7ffd94b9f000-7ffd94ba1000 r-xp 00000000 0 [vdso]
#
# perf record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data (8 samples) ]
# perf report --mmaps
# pid tid ppid comm
0 0 -1 |swapper
4161 4161 -1 |sleep
55afae69a000-55afae8a3000 r-xp 00000000 3147148 /usr/bin/sleep
7f569f00d000-7f569f3f0000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so
7f569f3f0000-7f569f61a000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so
7fff6fffe000-7fff70000000 r-xp 00000000 0 [vdso]
#
# perf record time sleep 1
0.00user 0.00system 0:01.00elapsed 0%CPU (0avgtext+0avgdata 2156maxresident)k
0inputs+0outputs (0major+73minor)pagefaults 0swaps
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data (14 samples) ]
# perf report --mmaps
# pid tid ppid comm
0 0 -1 |swapper
4281 4281 -1 |time
560560dca000-560560fcf000 r-xp 00000000 3190458 /usr/bin/time
7fc175196000-7fc175579000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so
7fc175579000-7fc1757a3000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so
7ffc924f6000-7ffc924f8000 r-xp 00000000 0 [vdso]
4282 4282 4281 | sleep
560560dca000-560560fcf000 r-xp 00000000 3190458 /usr/bin/time
564b4de3c000-564b4e045000 r-xp 00000000 3147148 /usr/bin/sleep
7f6a5a716000-7f6a5aaf9000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so
7f6a5aaf9000-7f6a5ad23000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so
7fc175196000-7fc175579000 r-xp 00000000 3149795 /usr/lib64/libc-2.26.so
7fc175579000-7fc1757a3000 r-xp 00000000 3149715 /usr/lib64/ld-2.26.so
7ffc924f6000-7ffc924f8000 r-xp 00000000 0 [vdso]
7ffcec7e6000-7ffcec7e8000 r-xp 00000000 0 [vdso]
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zulwdlg5rfowogr1qznorvvc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --stats option to display quick data statistics of event numbers,
without any further processing, like the one at the end of the perf
report -D command.
$ perf report --stat
Aggregated stats:
TOTAL events: 4566
MMAP events: 113
LOST events: 19
COMM events: 3
FORK events: 400
SAMPLE events: 3315
MMAP2 events: 32
FINISHED_ROUND events: 681
THREAD_MAP events: 1
CPU_MAP events: 1
TIME_CONV events: 1
I found this useful when hunting lost events for another change.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180107160356.28203-12-jolsa@kernel.org
[ Rename it to --stats, plural ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I want to display the pure events status coming in the next patch and
the tool's warnings are superfluous in the output. Making it optional,
enabled by default.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180107160356.28203-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding support to display sample misc field in form
of letter for each bit:
# perf script -F +misc ...
sched-messaging 1414 K 28690.636582: 4590 cycles ...
sched-messaging 1407 U 28690.636600: 325620 cycles ...
sched-messaging 1414 K 28690.636608: 19473 cycles ...
misc field __________/
The misc bits are assigned to following letters:
PERF_RECORD_MISC_KERNEL K
PERF_RECORD_MISC_USER U
PERF_RECORD_MISC_HYPERVISOR H
PERF_RECORD_MISC_GUEST_KERNEL G
PERF_RECORD_MISC_GUEST_USER g
PERF_RECORD_MISC_MMAP_DATA* M
PERF_RECORD_MISC_COMM_EXEC E
PERF_RECORD_MISC_SWITCH_OUT S
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180107160356.28203-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no reason anymore to treat babel trace in a special way, because
a) we no longer display its state b) the needed babeltrace library is
now out and well adopted among distros.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180107160356.28203-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf script has a --time option to limit the time range of output. It
only supports absolute time.
Now this option is extended to support multiple time ranges and support
the percent of time.
For example:
1. Select the first and second 10% time slices:
perf script --time 10%/1,10%/2
2. Select from 0% to 10% and 30% to 40% slices:
perf script --time 0%-10%,30%-40%
Changelog:
v6: Fix the merge issue with latest perf/core branch.
No functional changes.
v5: Add checking of first/last sample time to detect if it's recorded
in perf.data. If it's not recorded, returns error message to user.
v4: Remove perf_time__skip_sample, only uses perf_time__ranges_skip_sample
v3: Since the definitions of first_sample_time/last_sample_time
are moved from perf_session to perf_evlist so change the
related code.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512738826-2628-7-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report has a --time option to limit the time range of output. It
only supports absolute time.
Now this option is extended to support multiple time ranges and support
the percent of time.
For example:
1. Select the first and second 10% time slices:
perf report --time 10%/1,10%/2
2. Select from 0% to 10% and 30% to 40% slices:
perf report --time 0%-10%,30%-40%
Changelog:
v6: Fix the merge issue with latest perf/core branch.
No functional changes.
v5: Add checking of first/last sample time to detect if it's recorded
in perf.data. If it's not recorded, returns error message to user.
v4: Remove perf_time__skip_sample, only uses perf_time__ranges_skip_sample
v3: Since the definitions of first_sample_time/last_sample_time
are moved from perf_session to perf_evlist so change the
related code.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512738826-2628-6-git-send-email-yao.jin@linux.intel.com
[ Add missing colons at end of examples in the man page ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previous patch supports the multiple time range.
For example, select the first and second 10% time slices.
perf report --time 10%/1,10%/2
We need a function to check if a timestamp is in the ranges of
[0, 10%) and [10%, 20%].
Note that it includes the last element in [10%, 20%] but it doesn't
include the last element in [0, 10%). It's to avoid the overlap.
This patch implments a new function perf_time__ranges_skip_sample
for this checking.
Change log:
v4: Let perf_time__ranges_skip_sample be compatible with
perf_time__skip_sample when only one time range.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512738826-2628-5-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current perf report/script/... have a --time option to limit the time
range of output. But right now it only supports absolute time, add
support for time percentage.
For example:
1. Select the second 10% time slice
perf report --time 10%/2
2. Select from 0% to 10% time slice
perf report --time 0%-10%
It also support the multiple time ranges.
3. Select the first and second 10% time slices
perf report --time 10%/1,10%/2
4. Select from 0% to 10% and 30% to 40% slices
perf report --time 0%-10%,30%-40%
Changelog:
v4: An issue is found. Following passes.
perf script --time 10%/10x12321xsdfdasfdsafdsafdsa
Now it uses strtol to replace atoi.
Committer notes:
This just puts in place the infrastructure, so the examples in this cset
comment will only work later, after more patches in this series are
applied.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512738826-2628-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the default 'perf record' configuration, all samples are processed,
to create the HEADER_BUILD_ID table. So it's very easy to get the
first/last samples and save the time to perf file header via the
function write_sample_time().
Later, at post processing time, perf report/script will fetch the time
from perf file header.
Committer testing:
# perf record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.099 MB perf.data (1101 samples) ]
[root@jouet home]# perf report --header | grep "time of "
# time of first sample : 22947.909226
# time of last sample : 22948.910704
#
# perf report -D | grep PERF_RECORD_SAMPLE\(
0 22947909226101 0x20bb68 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa21b1af3 period: 1 addr: 0
0 22947909229928 0x20bb98 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa200d204 period: 1 addr: 0
<SNIP>
3 22948910397351 0x219360 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 28251/28251: 0xffffffffa22071d8 period: 169518 addr: 0
0 22948910652380 0x20f120 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 198807 addr: 0
2 22948910704034 0x2172d0 [0x30]: PERF_RECORD_SAMPLE(IP, 0x4001): 0/0: 0xffffffffa2856816 period: 88111 addr: 0
#
Changelog:
v7: Just update the patch description according to Arnaldo's suggestion.
v6: Currently '--buildid-all' is not enabled at default. So the walking
on all samples is the default operation. There is no big overhead
to calculate the timestamp boundary in process_sample_event handler
once we already go through all samples. So the timestamp boundary
calculation is enabled by default when '--buildid-all' is not enabled.
While if '--buildid-all' is enabled, we creates a new option
"--timestamp-boundary" for user to decide if it enables the
timestamp boundary calculation.
v5: There is an issue that the sample walking can only work when
'--buildid-all' is not enabled. So we need to let the walking
be able to work even if '--buildid-all' is enabled and let the
processing skips the dso hit marking for this case.
At first, I want to provide a new option "--record-time-boundaries".
While after consideration, I think a new option is not very
necessary.
v3: Remove the definitions of first_sample_time and last_sample_time
from struct record and directly save them in perf_evlist.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512738826-2628-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report/script/... have a --time option to limit the time range of
output. That's very useful to slice large traces, e.g. when processing
the output of perf script for some analysis.
But right now --time only supports absolute time. Also there is no fast
way to get the start/end times of a given trace except for looking at
it. This makes it hard to e.g. only decode the first half of the trace,
which is useful for parallelization of scripts
Another problem is that perf records are variable size and there is no
synchronization mechanism. So the only way to find the last sample
reliably would be to walk all samples. But we want to avoid that in perf
report/... because it is already quite expensive. That is why storing
the first sample time and last sample time in perf record is better.
This patch creates a new header feature type HEADER_SAMPLE_TIME and
related ops. Save the first sample time and the last sample time to the
feature section in perf file header. That will be done when, for
instance, processing build-ids, where we already have to process all
samples to create the build-id table, take advantage of that to further
amortize that processing by storing HEADER_SAMPLE_TIME to make 'perf
report/script' faster when using --time.
Committer testing:
After this patch is applied the header is written with zeroes, we need
the next patch, for "perf record" to actually write the timestamps:
# perf report -D | grep PERF_RECORD_SAMPLE\(
22501155244406 0x44f0 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 25016/25016: 0xffffffffa21be8c5 period: 1 addr: 0
<SNIP>
22501155793625 0x4a30 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 25016/25016: 0xffffffffa21ffd50 period: 2828043 addr: 0
# perf report --header | grep "time of "
# time of first sample : 0.000000
# time of last sample : 0.000000
#
Changelog:
v7: 1. Rebase to latest perf/core branch.
2. Add following clarification in patch description according to
Arnaldo's suggestion.
"That will be done when, for instance, processing build-ids,
where we already have to process all samples to create the
build-id table, take advantage of that to further amortize
that processing by storing HEADER_SAMPLE_TIME to make
'perf report/script' faster when using --time."
v4: Use perf script time style for timestamp printing. Also add with
the printing of sample duration.
v3: Remove the definitions of first_sample_time/last_sample_time from
perf_session. Just define them in perf_evlist
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512738826-2628-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When enabling '-b' option in perf record, for example,
perf record -b ...
perf report
and then browsing the annotate browser from perf report (press 'A'), it
would fail (annotate browser can't be displayed).
It's because the '.add_entry_cb' op of struct report is overwritten by
hist_iter__branch_callback() in builtin-report.c. But this function doesn't do
something like mapping symbols and sources. So next, do_annotate() will return
directly.
notes = symbol__annotation(act->ms.sym);
if (!notes->src)
return 0;
This patch adds the lost code to hist_iter__branch_callback (refer to
hist_iter__report_callback).
v2:
Fix a crash bug when perform 'perf report --stdio'.
The reason is that we init the symbol annotation only in browser mode, it
doesn't allocate/init resources for stdio mode.
So now in hist_iter__branch_callback(), it will return directly if it's not in
browser mode.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1514284963-18587-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a valid vmlinux is not found, 'perf report' falls back to look at
/proc/kcore. In this case, it will report the impossible large offset.
For example:
# perf record -b -e cycles:k find /etc/ > /dev/null
# perf report --stdio --branch-history
22.77% _vm_normal_page+18446603336221188162
|
---page_remove_rmap +18446603336221188324
page_remove_rmap +18446603336221188487 (cycles:5)
unlock_page_memcg +18446603336221188096
page_remove_rmap +18446603336221188327 (cycles:1)
The issue is the value which is passed to parameter 'addr' in
__get_srcline() is the objdump address. It's not correct if we calculate
the offset by using 'addr - sym->start'.
This patch creates a new parameter 'ip' in __get_srcline(). It is not
converted to objdump address.
With this patch, the perf report output is:
22.77% _vm_normal_page+66
|
---page_remove_rmap +228
page_remove_rmap +391 (cycles:5)
unlock_page_memcg +0
page_remove_rmap +231 (cycles:1)
page_remove_rmap +236
Committer testing:
Make sure you get any valid vmlinux out of the way, using '-v' on the
'perf report' case and deleting it from places where perf searches them,
like your kernel build dir and the build-id cache, in ~/.debug/.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1514564812-17344-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a compile error:
...
CC util/libunwind/x86_32.o
In file included from util/libunwind/x86_32.c:33:0:
util/libunwind/../../arch/x86/util/unwind-libunwind.c: In function 'libunwind__x86_reg_id':
util/libunwind/../../arch/x86/util/unwind-libunwind.c:110:11: error: 'EINVAL' undeclared (first use in this function)
return -EINVAL;
^
util/libunwind/../../arch/x86/util/unwind-libunwind.c:110:11: note: each undeclared identifier is reported only once for each function it appears in
mv: cannot stat 'util/libunwind/.x86_32.o.tmp': No such file or directory
make[4]: *** [util/libunwind/x86_32.o] Error 1
make[3]: *** [util] Error 2
make[2]: *** [libperf-in.o] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2
It happens when libunwind-x86 feature is detected.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20171206015040.114574-1-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf test bpf' was hooking a eBPF program on the SyS_epoll_wait()
kernel function, that was what the epoll_wait() glibc function ended up
calling, but since at least glibc 2.26, the one that comes with, for
instance, Fedora 27, glibc ends up calling SyS_epoll_pwait() when
epoll_wait() is used, causing this 'perf test' entry to fail.
So switch to using epoll_pwait() and hook the eBPF program to the
SyS_epoll_pwait() kernel function to make it work on a wider range of
glibc and kernel versions.
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-zynvquy63er8s5mrgsz65pto@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To follow standard practice in the kernel sources, documenting the
initialization better and helping quickly finding the value for some
field in a struct with many entries.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-syn3hz9hz7ukxlxbx5x6hv20@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When failing on one of the BPF tests we were just stating:
BPF filter result incorrect
Add some more info to help figuring out the problem:
BPF filter result incorrect, expected 56, got 0 samples
This came out while investigating this failure, first seen after
updating the kernel to the 4.15.0-rc6 tag:
[root@jouet ~]# perf test bpf
39: BPF filter :
39.1: Basic BPF filtering : FAILED!
39.2: BPF pinning : Skip
39.3: BPF prologue generation: Skip
39.4: BPF relocation checker : Skip
[root@jouet ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-403npu7daupv6b2bmxliv5pk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's a follow up patch for a previous patch "perf tool: Return all
events as auto-completions after comma".
With this patch, auto-completion can work well for events with a ':'.
For example:
root@skl:/tmp# perf stat -e block:block_<TAB>
block:block_bio_backmerge block:block_rq_complete
block:block_bio_bounce block:block_rq_insert
block:block_bio_complete block:block_rq_issue
block:block_bio_frontmerge block:block_rq_remap
block:block_bio_queue block:block_rq_requeue
block:block_bio_remap block:block_sleeprq
block:block_dirty_buffer block:block_split
block:block_getrq block:block_touch_buffer
block:block_plug block:block_unplug
root@skl:/tmp# perf stat -e block:block_rq_<TAB>
block:block_rq_complete block:block_rq_issue block:block_rq_requeue
block:block_rq_insert block:block_rq_remap
root@skl:/tmp# perf stat -e block:block_rq_complete<TAB>
block:block_rq_complete
root@skl:/tmp# perf stat -e block:block_rq_complete
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1513973758-19109-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's a follow up for one previous patch "perf tool: Improve bash command
line auto-complete for multiple events with comma."
It fixes an issue that no events are displayed when <TAB> is directly
typed after comma.
With this patch, now the result is:
root@skl:/tmp# perf stat -e cpu-cycles,<TAB>
Display all 2389 possibilities? (y or n)
alarmtimer:alarmtimer_cancel
alarmtimer:alarmtimer_fired
alarmtimer:alarmtimer_start
alarmtimer:alarmtimer_suspend
alignment-faults
arith.divider_active
BAClear_Cost
baclears.any
block:block_bio_backmerge
block:block_bio_bounce
block:block_bio_complete
block:block_bio_frontmerge
block:block_bio_queue
block:block_bio_remap
block:block_dirty_buffer
block:block_getrq
block:block_plug
block:block_rq_complete
block:block_rq_insert
block:block_rq_issue
block:block_rq_remap
block:block_rq_requeue
block:block_sleeprq
--More--
One remaining issue is that the auto-completions doesn't work well
for the event with ':'. For example, clk:clk_enable.
Because ':' is set as WORDBREAK by default in bash. Need more work
for this case.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1513940255-16528-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf has perf-completion.sh to define command line auto-completion in
bash/zsh.
For record/stat -e it works for single events, but isn't working when
specifying multiple events with comma.
It would be very useful if it could be fixed to make it easier by
supporting multiple events, comma separated.
With this patch, the result can be like this:
1. Support the events returned from 'perf list --raw-dump'
root@skl:/tmp# perf stat -e cpu/cache<TAB>
cpu/cache-misses/ cpu/cache-references/
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-<TAB>
cpu/branch-instructions/ cpu/branch-misses/
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-i<TAB>
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-instructions/
2. Support the events listed in /sys/bus/event_source/devices/cpu/events
root@skl:/tmp# perf stat -e cycle<TAB>
cycle_activity.cycles_l1d_miss cycle_activity.stalls_l3_miss
cycle_activity.cycles_l2_miss cycle_activity.stalls_mem_any
cycle_activity.cycles_l3_miss cycle_activity.stalls_total
cycle_activity.cycles_mem_any cycles-ct
cycle_activity.stalls_l1d_miss cycles-t
cycle_activity.stalls_l2_miss
root@skl:/tmp# perf stat -e cycles-<TAB>
cycles-ct cycles-t
root@skl:/tmp# perf stat -e cycles-t,cpu/c<TAB>
cpu/cache-misses/ cpu/cpu-cycles/ cpu/cycles-t/
cpu/cache-references/ cpu/cycles-ct/
root@skl:/tmp# perf stat -e cycles-t,cpu/cache-<TAB>
cpu/cache-misses/ cpu/cache-references/
root@skl:/tmp# perf stat -e cycles-t,cpu/cache-misses/
3. Support the uppercase event which is with prefix "cpu/"
root@skl:/tmp# perf stat -e cpu/c<TAB>
cpu/cache-misses/ cpu/cpu-cycles/ cpu/cycles-t/
cpu/cache-references/ cpu/cycles-ct/
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/C<TAB>
cpu/CACHE-MISSES/ cpu/CPU-CYCLES/ cpu/CYCLES-T/
cpu/CACHE-REFERENCES/ cpu/CYCLES-CT/
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/CACHE-REFERENCES/
Note that:
a) This patch only supports bash.
b) It doesn't support the cases like {},{} or {...,...}.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1513848370-8098-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
