Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the "real" big set of char/misc driver patches for 5.2-rc1
Loads of different driver subsystem stuff in here, all over the places:
- thunderbolt driver updates
- habanalabs driver updates
- nvmem driver updates
- extcon driver updates
- intel_th driver updates
- mei driver updates
- coresight driver updates
- soundwire driver cleanups and updates
- fastrpc driver updates
- other minor driver updates
- chardev minor fixups
Feels like this tree is getting to be a dumping ground of "small driver
subsystems" these days. Which is fine with me, if it makes things
easier for those subsystem maintainers.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHE2w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvyQCYj5vSHQ88yEU+bzwGzQQLOBWYIwCgm5Iku0Y3
f6V3MvRffg4qUp3cGbU=
=R37j
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc update part 2 from Greg KH:
"Here is the "real" big set of char/misc driver patches for 5.2-rc1
Loads of different driver subsystem stuff in here, all over the places:
- thunderbolt driver updates
- habanalabs driver updates
- nvmem driver updates
- extcon driver updates
- intel_th driver updates
- mei driver updates
- coresight driver updates
- soundwire driver cleanups and updates
- fastrpc driver updates
- other minor driver updates
- chardev minor fixups
Feels like this tree is getting to be a dumping ground of "small
driver subsystems" these days. Which is fine with me, if it makes
things easier for those subsystem maintainers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
intel_th: msu: Add current window tracking
intel_th: msu: Add a sysfs attribute to trigger window switch
intel_th: msu: Correct the block wrap detection
intel_th: Add switch triggering support
intel_th: gth: Factor out trace start/stop
intel_th: msu: Factor out pipeline draining
intel_th: msu: Switch over to scatterlist
intel_th: msu: Replace open-coded list_{first,last,next}_entry variants
intel_th: Only report useful IRQs to subdevices
intel_th: msu: Start handling IRQs
intel_th: pci: Use MSI interrupt signalling
intel_th: Communicate IRQ via resource
intel_th: Add "rtit" source device
intel_th: Skip subdevices if their MMIO is missing
intel_th: Rework resource passing between glue layers and core
intel_th: SPDX-ify the documentation
intel_th: msu: Fix single mode with IOMMU
coresight: funnel: Support static funnel
dt-bindings: arm: coresight: Unify funnel DT binding
coresight: replicator: Add new device id for static replicator
...
Now that we have a way to switch between MSC buffer windows, add code to
track the current window. The hardware register NWSA that contains the
address of the next window is unfortunately not always usable, and since
the driver has full control of the window switching, there is no reason
not to keep this on the software side.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we have the means to trigger a window switch for the MSU trace
store, add a sysfs file to allow triggering it from userspace.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In multi window mode the MSU will set "window wrap" bit to indicate block
wrapping as well. Take this into account when checking data blocks.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for asserting window switch trigger when tracing to MSU output
ports. This allows for software controlled switching between windows of
the MSU buffer, which can be used for double buffering while exporting the
trace data further from the MSU.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The trace enable/disable functions of the GTH include the code that starts
and stops trace flom from the sources. This start/stop functionality will
also be used in the window switch trigger sequence.
Factor out start/stop code from the larger trace enable/disable code in
preparation for the window switch sequence.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code that waits for the pipeline empty condition of the MSU is
currently called in the path that disables the trace. We will also
need this in the window switch trigger sequence. Therefore, factor
out this code and make it accessible to the GTH device.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using a home-grown array of pointers to the DMA pages, switch
over to scatterlist data types and accessors, which has all the convenient
accessors, can be used to batch-map DMA memory and is convenient for
passing around between different layers, which will be useful when MSU
buffer management has to cross the boundaries of the MSU driver.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few places in the code where open-coded versions of list entry
accessors list_first_entry()/list_last_entry()/list_next_entry() are used.
Replace those with the standard macros.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only type of IRQ triggering event that is useful to us at the moment
is the "last block" interrupt of the MSU. This interrupt can only be
enabled via "MINTCTL" register that doesn't exist in earlier version of
the Intel TH.
Enumerate the presence of MINTCTL via per-device driver data structure
and only instantiate the IRQ resource for subdevices if this capability
is present.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We intend to use the interrupt to detect Last Block condition in the MSU
driver, which we can use for double-buffering software-managed data
transfers.
Add an interrupt handler to the MSU driver.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since Intel TH is capable of MSI interrupt signalling, make use of it.
The way it works is, each of the 7 interrupt triggering events has its
own vector in this mode, as opposed to interrupt line delivery, where
all events are signalled via the same line. Failing to enable MSI, the
driver falls back to using an interrupt line.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the IRQ is passed between the glue layers and the core as a
separate argument, while the MMIO resources are passed as resources.
This also limits the number of IRQs thus used to one, while the current
versions of Intel TH use a different MSI vector for each interrupt
triggering event, of which there are 7.
Change this to pass IRQ in the resources array.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some versions of Intel TH, the Software Trace Hub (STH) has a second
MMIO BAR dedicated to the input from Intel PT. This calls for a new
subdevice that will be enumerated if the corresponding BAR is present.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a subdevice requires an MMIO region that wasn't in the resources passed
down from the glue layer, don't instantiate it, but don't error out. This
means that that particular subdevice doesn't exist for this instance of
Intel TH, which is a perfectly normal situation. This applies, for example,
to the "rtit" source device.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, MMIO resource numbers in the TH driver core correspond to
PCI BAR numbers, because in the beginning there was only the PCI glue
layer. This created some confusion when the ACPI glue layer was added.
To avoid confusion and remove glue-specific code from the driver core,
split the resource indices between core and glue layers and change the
API so that the driver core receives the MMIO resources in the same
fixed order. At the same time, make the IRQ always be a parameter to
intel_th_alloc() instead of sometimes passing it as a resource.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the pages that are allocated for the single mode of MSC are not
mapped into the device's dma space and the code is incorrectly using
*_to_phys() in place of a dma address. This fails with IOMMU enabled and
is otherwise bad practice.
Fix the single mode buffer allocation to map the pages into the device's
DMA space.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: ba82664c13 ("intel_th: Add Memory Storage Unit driver")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since CoreSight hardware topology can use a 'hidden' funnel in the
trace data path, this kind funnel doesn't have register for accessing
and is used by default from hardware design perspective. Below is an
example for related hardware topology:
+------+ +------+
| cpu0 |->| ETM |-\
+------+ +------+ \-> +--------+ +-----+
...... | Funnel |->| ETF |-\ Hidden funnel
+------+ +------+ /-> +--------+ +-----+ \ |
| cpu3 |->| ETM |-/ \ V
+------+ +------+ \-> +--------+
| Funnel |-> ...
+------+ +------+ /-> +--------+
| cpu4 |->| ETM |-\ /
+------+ +------+ \-> +--------+ +-----+ /
...... | Funnel |->| ETF |-/
+------+ +------+ /-> +--------+ +-----+
| cpu7 |->| ETM |-/
+------+ +------+
The CoreSight funnel driver only supports dynamic funnel with
registration register resource, thus it cannot support for the static
funnel case and it's impossible to create trace data path for this case.
This patch is to extend CoreSight funnel driver to support both for
static funnel and dynamic funnel. For the dynamic funnel it reuses the
code existed in the driver, for static funnel the driver will support
device probe if without providing register resource and the driver skips
registers accessing when detect the register base is NULL.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Wanglai Shi <shiwanglai@hisilicon.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a device id for the new static replicator compatible
string; it changes the driver name from "coresight-replicator" to
"coresight-static-replicator" as well.
This patch also gives warning when use the replicator obsolete DT
binding.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for CPU-wide trace scenarios by making sure that
only the sources monitoring the same process have access to a common sink.
Because the sink is shared between sources, the first source to use the
sink switches it on while the last one does the cleanup. Any attempt to
modify the HW is overlooked for as long as more than one source is using
a sink.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for CPU-wide trace scenarios by making sure that
only the sources monitoring the same process have access to a common sink.
Because the sink is shared between sources, the first source to use the
sink switches it on while the last one does the cleanup. Any attempt to
modify the HW is overlooked for as long as more than one source is using
a sink.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for CPU-wide trace scenarios by making sure that
only the sources monitoring the same process have access to a common sink.
Because the sink is shared between sources, the first source to use the
sink switches it on while the last one does the cleanup. Any attempt to
modify the HW is overlooked for as long as more than one source is using
a sink.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch uses the PID of the process being traced to allocate and free
ETR memory buffers for CPU-wide scenarios. The implementation is tailored
to handle both N:1 and 1:1 source/sink HW topologies.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In CPU-wide scenarios with an N:1 source/sink topology, sources share
the same sink. In order to reuse the same sink for all sources an
IDR is needed to archive events that have already been accounted for.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds reference counting to struct etr_buf so that, in CPU-wide
trace scenarios, shared buffers can be disposed of when no longer used.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to support CPU-wide trace scenarios, introduce the notion
of process ID to ETR devices. That way events monitoring the same process
can use the same etr_buf, allowing multiple CPUs to use the same sink.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Buffer allocation is different when dealing with per-thread and
CPU-wide sessions. In preparation to support CPU-wide trace scenarios
simplify things by keeping allocation functions for both type separate.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactoring function tmc_etr_setup_perf_buf() so that it only deals
with the high level etr_perf_buffer, leaving the allocation of the
backend buffer (i.e etr_buf) to another function.
That way the backend buffer allocation function can decide if it wants
to reuse an existing buffer (CPU-wide trace scenarios) or simply create
a new one.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make struct perf_event available to sink buffer allocation functions in
order to use the pid they carry to allocate and free buffer memory along
with regimenting access to what source a sink can collect data for.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function free_event_data() is already busy and is bound to become
worse with the addition of CPU-wide trace scenarios. As such spin
off a new function to strickly take care of the sink buffers.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no point in allocating sink memory for a trace session if
there is not a way to free it once it is no longer needed. As such make
sure the sink API function to allocate and free memory have been
implemented before moving ahead with the establishment of a trace
session.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When operating in CPU-wide trace scenarios and working with an N:1
source/sink HW topology, update() functions need to be made atomic
in order to avoid racing with start and stop operations.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When disabling a sink the reference counter ensures the operation goes
through if nobody else is using it. As such if drvdata::mode is already
set do CS_MODE_DISABLED, it is an error and should be reported as such.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When operating in CPU-wide mode with an N:1 source/sink HW topology,
multiple CPUs can access a sink concurrently. As such reference counting
needs to happen when the device's spinlock is held to avoid racing with
other operations (start(), update(), stop()), such as:
session A Session B
----- -------
enable_sink
atomic_inc(refcount) = 1
...
atomic_dec(refcount) = 0 enable_sink
if (refcount == 0) disable_sink
atomic_inc()
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to handle device reference counting inside of the sink
drivers, add a return code to the sink::disable() operation so that
proper action can be taken if a sink has not been disabled.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Configure timestamps to be emitted at regular intervals in the trace
stream to temporally correlate instructions executed on different CPUs.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Resource selector pair 0 is always implemented and reserved. As such
it should not be explicitly programmed.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the proper bit in the configuration register when contextID tracing
has been requested by user space. That way PE_CONTEXT elements are
generated by the tracers when a process is installed on a CPU.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add to the capabilities the ITRACE property so that ITRACE START events
are generated when the PMU is switched on by the core.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the power only if we were successful in probing the device.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the power handle only if we were successful. Otherwise
the AMBA bus code would do the rest.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop the power only when we have successfully probed. Otherwise
leave it to the amba probe to do the rest.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Removed extra newline left after original modification]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We drop the power before we complete the probe successfully. We
are supposed to drop it only when we are successful. Also, probing
the etb_buffer_length happens with the power turned up. So we don't
need to do that again in the helper.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With commit c2c729415b ("coresight: platform: Cleanup coresight
connection handling"), we switched to re-using coresight_connections
for the coresight_device. However, that introduced a mismatch in the
alloc/free of the connections. The allocation is made using devm_*,
while we use kfree() to release the memory when a device is released
(even though we don't support this at the moment). Fix this by leaving
it to the automatic freeing of the memory.
Fixes: c2c729415b ("coresight: platform: Cleanup coresight connection handling")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge the drivers for the two varieties of replicators into
a singel one. The dynamic replicator has programming base
which can be programmed to filter the trace data. The driver
detects the type based on the "base" address value of the
device, which is NULL for the static device.
Also, while at it, remove the now obsolete DYNAMIC_REPLICATOR
config entry.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the dynamic replicator specific routines for merging with the
replicator driver. Also re-arrange the probe routine to make it easier
to merge.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As a preparatory step to merge the separate drivers for static and
dynamic replicators, annotate the static replicator specific details.
Also refactor the probe routine to make it generic in order to merge
the drivers easily.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We fail to disable the clock in case of a failure during the
probe. Clean this up. Also, we are supposed to drop the pm reference
only when the probing is successful.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we failed to setup the DMA mask for TMC-ETR, report the
error before failing the probe.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
