The load_microcode_amd() function searches for microcode patches and
attempts to apply a microcode patch if it is of different level than the
currently installed level.
While the processor won't actually load a level that is less than
what is already installed, the logic wrongly returns UCODE_NEW thus
signaling to its caller reload_store() that a late loading should be
attempted.
If the file-system contains an older microcode revision than what is
currently running, such a late microcode reload can result in these
misleading messages:
x86/CPU: CPU features have changed after loading microcode, but might not take effect.
x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.
These messages were issued on a system where SME/SEV are not
enabled by the BIOS (MSR C001_0010[23] = 0b) because during boot,
early_detect_mem_encrypt() is called and cleared the SME and SEV
features in this case.
However, after the wrong late load attempt, get_cpu_cap() is called and
reloads the SME and SEV feature bits, resulting in the messages.
Update the microcode level check to not attempt microcode loading if the
current level is greater than(!) and not only equal to the current patch
level.
[ bp: massage commit message. ]
Fixes: 2613f36ed9 ("x86/microcode: Attempt late loading only when new microcode is present")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/154894518427.9406.8246222496874202773.stgit@tlendack-t1.amdoffice.net
Currently, the code scanning the CPU equivalence table read from a
microcode container file assumes that it actually contains a terminating
zero entry.
Check also the size of this table to make sure that no reads past its
end happen, in case there's no terminating zero entry at the end of the
table.
[ bp: Adjust to new changes. ]
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/20181107170218.7596-16-bp@alien8.de
Convert the CPU equivalence table into a proper struct in preparation
for tracking also the size of this table.
[ bp: Have functions deal with struct equiv_cpu_table pointers only. Rediff. ]
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/20181107170218.7596-15-bp@alien8.de
Convert the late loading path to use the newly introduced microcode
container data checking functions as it was previously done for the
early loader.
[ bp: Keep header length addition in install_equiv_cpu_table() and rediff. ]
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/20181107170218.7596-14-bp@alien8.de
Make it size_t everywhere as this is what we get from cpio.
[ bp: Fix a smatch warning. ]
Originally-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20181107170218.7596-13-bp@alien8.de
Now that they have the required functionality, use them to verify the
equivalence table and each patch, thus making parse_container() more
readable.
Originally-by: "Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/20181107170218.7596-12-bp@alien8.de
Add a verify_patch() function which tries to sanity-check many aspects
of a microcode patch supplied by an outside container before attempting
a load.
Prepend all sub-functions' names which verify an aspect of a microcode
patch with "__".
Call it in verify_and_add_patch() *before* looking at the microcode
header.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/20181107170218.7596-7-bp@alien8.de
Rename the variable which contains the patch size read out from the
section header to sh_psize for better differentiation of all the "sizes"
in that function.
Also, improve the comment above it.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/20181107170218.7596-6-bp@alien8.de
Starting with family 0x15, the patch size verification is not needed
anymore. Thus get rid of the need to update this checking function with
each new family.
Keep the check for older families.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/20181107170218.7596-5-bp@alien8.de
Add container and patch verification functions to the AMD microcode
update driver.
These functions check whether a passed buffer contains the relevant
structure, whether it isn't truncated and (for actual microcode patches)
whether the size of a patch is not too large for a particular CPU family.
By adding these checks as separate functions the actual microcode loading
code won't get interspersed with a lot of checks and so will be more
readable.
[ bp: Make all pr_err() calls into pr_debug() and drop the
verify_patch() bits. ]
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/3014e96c82cd90761b4601bd2cfe59c4119e46a7.1529424596.git.mail@maciej.szmigiero.name
verify_patch_size() verifies whether the remaining size of the microcode
container file is large enough to contain a patch of the indicated size.
However, the section header length is not included in this indicated
size but it is present in the leftover file length so it should be
subtracted from the leftover file length before passing this value to
verify_patch_size().
[ bp: Split comment. ]
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/6df43f4f6a28186a13a66e8d7e61143c5e1a2324.1529424596.git.mail@maciej.szmigiero.name
Handle the case where microcode gets loaded on the BSP's hyperthread
sibling first and the boot_cpu_data's microcode revision doesn't get
updated because of early exit due to the siblings sharing a microcode
engine.
For that, simply write the updated revision on all CPUs unconditionally.
Signed-off-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: prarit@redhat.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1533050970-14385-1-git-send-email-sironi@amazon.de
When preparing an MCE record for logging, boot_cpu_data.microcode is used
to read out the microcode revision on the box.
However, on systems where late microcode update has happened, the microcode
revision output in a MCE log record is wrong because
boot_cpu_data.microcode is not updated when the microcode gets updated.
But, the microcode revision saved in boot_cpu_data's microcode member
should be kept up-to-date, regardless, for consistency.
Make it so.
Fixes: fa94d0c6e0 ("x86/MCE: Save microcode revision in machine check records")
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: sironi@amazon.de
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180731112739.32338-1-prarit@redhat.com
The file Documentation/x86/early-microcode.txt was renamed to
Documentation/x86/microcode.txt in 0e3258753f, but it was still
referenced by its old name in a three places:
* Documentation/x86/00-INDEX
* arch/x86/Kconfig
* arch/x86/kernel/cpu/microcode/amd.c
This commit updates these references accordingly.
Fixes: 0e3258753f ("x86/microcode: Document the three loading methods")
Signed-off-by: Jaak Ristioja <jaak@ristioja.ee>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Return UCODE_NEW from the scanning functions to denote that new microcode
was found and only then attempt the expensive synchronization dance.
Reported-by: Emanuel Czirai <xftroxgpx@protonmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Emanuel Czirai <xftroxgpx@protonmail.com>
Tested-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20180314183615.17629-1-bp@alien8.de
... so that callers can know when microcode was updated and act
accordingly.
Tested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180216112640.11554-2-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The size for the Microcode Patch Block (MPB) for an AMD family 17h
processor is 3200 bytes. Add a #define for fam17h so that it does
not default to 2048 bytes and fail a microcode load/update.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20171130224640.15391.40247.stgit@tlendack-t1.amdoffice.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
verify_and_add_patch() allocates memory for a microcode patch and hands
it down to be added to the cache of patches. However, if the cache
already has the latest patch, the newly allocated one needs to be freed
before returning. Do that.
This issue has been found by kmemleak:
unreferenced object 0xffff88010e780b40 (size 32):
comm "bash", pid 860, jiffies 4294690939 (age 29.297s)
backtrace:
kmemleak_alloc
kmem_cache_alloc_trace
load_microcode_amd.isra.0
request_microcode_amd
reload_store
dev_attr_store
sysfs_kf_write
kernfs_fop_write
__vfs_write
vfs_write
SyS_write
do_syscall_64
return_from_SYSCALL_64
0xffffffffffffffff
(gdb) list *0xffffffff81050d60
0xffffffff81050d60 is in load_microcode_amd
(arch/x86/kernel/cpu/microcode/amd.c:616).
which is this:
patch = kzalloc(sizeof(*patch), GFP_KERNEL);
--> if (!patch) {
pr_err("Patch allocation failure.\n");
return -EINVAL;
}
Signed-off-by: Shu Wang <shuwang@redhat.com>
[ Rewrite commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: chuhu@redhat.com
Cc: liwang@redhat.com
Link: http://lkml.kernel.org/r/20170724101228.17326-2-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The helper function __load_ucode_amd() and pointer intel_ucode_patch do
not need to be in global scope, so make them static.
Fixes those sparse warnings:
"symbol '__load_ucode_amd' was not declared. Should it be static?"
"symbol 'intel_ucode_patch' was not declared. Should it be static?"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170622095736.11937-1-colin.king@canonical.com
With CONFIG_DEBUG_PREEMPT enabled, I get:
BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
caller is debug_smp_processor_id
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc2+ #2
Call Trace:
dump_stack
check_preemption_disabled
debug_smp_processor_id
save_microcode_in_initrd_amd
? microcode_init
save_microcode_in_initrd
...
because, well, it says it above, we're using smp_processor_id() in
preemptible code.
But passing the CPU number is not really needed. It is only used to
determine whether we're on the BSP, and, if so, to save the microcode
patch for early loading.
[ We don't absolutely need to do it on the BSP but we do that
customarily there. ]
Instead, convert that function parameter to a boolean which denotes
whether the patch should be saved or not, thereby avoiding the use of
smp_processor_id() in preemptible code.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170528200414.31305-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
mc is a pointer to the static u8 array amd_ucode_patch and
therefore can never be null, so the check is redundant. Remove it.
Detected by CoverityScan, CID#1372871 ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: kernel-janitors@vger.kernel.org
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/20170315171010.17536-1-colin.king@canonical.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The equivalence ID was needed outside of the container scanning logic
but now, after this has been cleaned up, not anymore. Now, cont_desc.mc
is used to denote whether the container we're looking at has the proper
microcode patch for this CPU or not.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-17-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The idea was to not scan the microcode blob on each AP (Application
Processor) during boot and thus save us some milliseconds. However, on
architectures where the microcode engine is shared between threads, this
doesn't work. Here's why:
The microcode on CPU0, i.e., the first thread, gets updated. The second
thread, i.e., CPU1, i.e., the first AP walks into load_ucode_amd_ap(),
sees that there's no container cached and goes and scans for the proper
blob.
It finds it and as a last step of apply_microcode_early_amd(), it tries
to apply the patch but that core has already the updated microcode
revision which it has received through CPU0's update. So it returns
false and we do desc->size = -1 to prevent other APs from scanning.
However, the next AP, CPU2, has a different microcode engine which
hasn't been updated yet. The desc->size == -1 test prevents it from
scanning the blob anew and we fail to update it.
The fix is much more straight-forward than it looks: the BSP
(BootStrapping Processor), i.e., CPU0, caches the microcode patch
in amd_ucode_patch. We use that on the AP and try to apply it.
In the 99.9999% of cases where we have homogeneous cores - *not*
mixed-steppings - the application will be successful and we're good to
go.
In the remaining small set of systems, we will simply rescan the blob
and find (or not, if none present) the proper patch and apply it then.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-16-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No need to use the previously stashed info in the container - simply go
ahead and parse the initrd once more. It simplifies and streamlines the
code a whole lot.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-15-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use a version for both bitness by adding a helper which does the actual
container finding and parsing which can be used on any CPU - BSP or AP.
Streamlines the paths more.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-14-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Check final patch levels for AMD only on the BSP. This way, we decide
early and only once whether to continue loading or to leave the loader
disabled on such systems.
Simplify a lot.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-13-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the generic helper instead of semi-open-coding the procedure.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-11-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We have a container which we update/prepare each time before applying a
microcode patch instead of using a global.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-10-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Get CPUID(1).EAX value once per CPU and propagate value into the callers
instead of conveniently calling it every time.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-9-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It was pretty clumsy before and the whole work of parsing the microcode
containers was spread around the functions wrongly.
Clean it up so that there's a main scan_containers() function which
iterates over the microcode blob and picks apart the containers glued
together. For each container, it calls a parse_container() helper which
concentrates on one container only: sanity-checking, parsing, counting
microcode patches in there, etc.
It makes much more sense now and it is actually very readable. Oh, and
we luvz a diffstat removing more crap than adding.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-8-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make it into a container descriptor which is being passed around and
stores important info like the matching container and the patch for the
current CPU. Make it static too.
Later patches will use this and thus get rid of a double container
parsing.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-7-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The whole driver calls this "mc", do that here too.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-6-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No need to have it marked "inline" - let gcc decide. Also, shorten the
argument name and simplify while-test.
While at it, make it into a proper for-loop and simplify it even more,
as tglx suggests.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20170120202955.4091-5-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When CONFIG_PARAVIRT is selected, cpuid() becomes a call. Since
for 32-bit kernels load_ucode_amd_bsp() is executed before paging
is enabled the call cannot be completed (as kernel virtual addresses
are not reachable yet).
Use native_cpuid() instead which is an asm wrapper for the CPUID
instruction.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Jürgen Gross <jgross@suse.com>
Link: http://lkml.kernel.org/r/1481906392-3847-1-git-send-email-boris.ostrovsky@oracle.com
Link: http://lkml.kernel.org/r/20161218164414.9649-5-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make it simply return bool to denote whether it found a container or not
and return the pointer to the container and its size in the handed-in
container pointer instead, as returning a struct was just silly.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Jürgen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/20161218164414.9649-3-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fixup signature and retvals, return the container struct through the
passed in pointer, not as a function return value.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Jürgen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/20161218164414.9649-2-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Yeah, I know, I know, this is a huuge patch and reviewing it is hard.
Sorry but this is the only way I could think of in which I can rewrite
the microcode patches loading procedure without breaking (knowingly) the
driver.
So maybe this patch is easier to review if one looks at the files after
the patch has been applied instead at the diff. Because then it becomes
pretty obvious:
* The BSP-loading path - load_ucode_bsp() is working independently from
the AP path now and it doesn't save any pointers or patches anymore -
it solely parses the builtin or initrd microcode and applies the patch.
That's it.
This fixes the CONFIG_RANDOMIZE_MEMORY offset fun more solidly.
* The AP-loading path - load_ucode_ap() then goes and scans
builtin/initrd *again* for the microcode patches but it caches them this
time so that we don't have to do that scan on each AP but only once.
This simplifies the code considerably.
Then, when we save the microcode from the initrd/builtin, we go and
add the relevant patches to our own cache. The AMD side did do that
and now the Intel side does it too. So no more pointer copying and
blabla, we save the microcode patches ourselves and are independent from
initrd/builtin.
This whole conversion gives us other benefits like unifying the
initrd parsing into a single function: find_microcode_in_initrd() is
used by both.
The diffstat speaks for itself: 456 insertions(+), 695 deletions(-)
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161025095522.11964-12-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make them all static as they're used in a single file now.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161025095522.11964-10-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Will be needed in a following patch.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161025095522.11964-7-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It will be used by both drivers so move it to core.c.
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161025095522.11964-6-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cpu_init() is run also on the BSP (in addition to the APs):
x86_64_start_kernel
|-> x86_64_start_reservations
|-> start_kernel
|-> trap_init
|-> cpu_init
|-> load_ucode_ap
...
but we run the AP (Application Processors) microcode loading routine
there too even though we have a BSP-specific routine for that:
load_ucode_bsp().
Which is unnecessary. So let's limit the AP microcode loading routine to
the APs only.
Remove a useless comment while at it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161025095522.11964-2-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We do not need to add the randomization offset when the microcode is
built in.
Reported-and-tested-by: Emanuel Czirai <icanrealizeum@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20160904093736.GA11939@pd.tnic
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Lendacky