Checking netif_xmit_frozen_or_stopped() at the end of sch_direct_xmit()
is being bypassed. This is because "ret" from sch_direct_xmit() will be
either NETDEV_TX_OK or NETDEV_TX_BUSY, and only ret == NETDEV_TX_OK == 0
will reach the condition:
if (ret && netif_xmit_frozen_or_stopped(txq))
return false;
This patch cleans up the code by removing the whole condition.
For more discussion about this, please refer to
https://marc.info/?t=152727195700008
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch, for NOLOCK qdiscs, q->seqlock is
always held when the dequeue() is invoked, we can drop
any additional locking to protect such operation.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So that we can use lockdep on it.
The newly introduced sequence lock has the same scope of busylock,
so it shares the same lockdep annotation, but it's only used for
NOLOCK qdiscs.
With this changeset we acquire such lock in the control path around
flushing operation (qdisc reset), to allow more NOLOCK qdisc perf
improvement in the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently NOLOCK qdiscs pay a measurable overhead to atomically
manipulate the __QDISC_STATE_RUNNING. Such bit is flipped twice per
packet in the uncontended scenario with packet rate below the
line rate: on packed dequeue and on the next, failing dequeue attempt.
This changeset moves the bit manipulation into the qdisc_run_{begin,end}
helpers, so that the bit is now flipped only once per packet, with
measurable performance improvement in the uncontended scenario.
This also allows simplifying the qdisc teardown code path - since
qdisc_is_running() is now effective for each qdisc type - and avoid a
possible race between qdisc_run() and dev_deactivate_many(), as now
the some_qdisc_is_busy() can properly detect NOLOCK qdiscs being busy
dequeuing packets.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the qdisc lock was dropped in pfifo_fast we allow multiple
enqueue threads and dequeue threads to run in parallel. On the
enqueue side the skb bit ooo_okay is used to ensure all related
skbs are enqueued in-order. On the dequeue side though there is
no similar logic. What we observe is with fewer queues than CPUs
it is possible to re-order packets when two instances of
__qdisc_run() are running in parallel. Each thread will dequeue
a skb and then whichever thread calls the ndo op first will
be sent on the wire. This doesn't typically happen because
qdisc_run() is usually triggered by the same core that did the
enqueue. However, drivers will trigger __netif_schedule()
when queues are transitioning from stopped to awake using the
netif_tx_wake_* APIs. When this happens netif_schedule() calls
qdisc_run() on the same CPU that did the netif_tx_wake_* which
is usually done in the interrupt completion context. This CPU
is selected with the irq affinity which is unrelated to the
enqueue operations.
To resolve this we add a RUNNING bit to the qdisc to ensure
only a single dequeue per qdisc is running. Enqueue and dequeue
operations can still run in parallel and also on multi queue
NICs we can still have a dequeue in-flight per qdisc, which
is typically per CPU.
Fixes: c5ad119fb6 ("net: sched: pfifo_fast use skb_array")
Reported-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported one use-after-free in pfifo_fast_enqueue() [1]
Issue here is that we can not reuse skb after a successful skb_array_produce()
since another cpu might have consumed it already.
I believe a similar problem exists in try_bulk_dequeue_skb_slow()
in case we put an skb into qdisc_enqueue_skb_bad_txq() for lockless qdisc.
[1]
BUG: KASAN: use-after-free in qdisc_pkt_len include/net/sch_generic.h:610 [inline]
BUG: KASAN: use-after-free in qdisc_qstats_cpu_backlog_inc include/net/sch_generic.h:712 [inline]
BUG: KASAN: use-after-free in pfifo_fast_enqueue+0x4bc/0x5e0 net/sched/sch_generic.c:639
Read of size 4 at addr ffff8801cede37e8 by task syzkaller717588/5543
CPU: 1 PID: 5543 Comm: syzkaller717588 Not tainted 4.16.0-rc4+ #265
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x24d lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report+0x23c/0x360 mm/kasan/report.c:412
__asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432
qdisc_pkt_len include/net/sch_generic.h:610 [inline]
qdisc_qstats_cpu_backlog_inc include/net/sch_generic.h:712 [inline]
pfifo_fast_enqueue+0x4bc/0x5e0 net/sched/sch_generic.c:639
__dev_xmit_skb net/core/dev.c:3216 [inline]
Fixes: c5ad119fb6 ("net: sched: pfifo_fast use skb_array")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+ed43b6903ab968b16f54@syzkaller.appspotmail.com
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pfifo_fast used to drop based on qdisc_dev(qdisc)->tx_queue_len,
so we have to resize skb array when we change tx_queue_len.
Other qdiscs which read tx_queue_len are fine because they
all save it to sch->limit or somewhere else in qdisc during init.
They don't have to implement this, it is nicer if they do so
that users don't have to re-configure qdisc after changing
tx_queue_len.
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new qdisc ops ->change_tx_queue_len() so that
each qdisc could decide how to implement this if it wants.
Previously we simply read dev->tx_queue_len, after pfifo_fast
switches to skb array, we need this API to resize the skb array
when we change dev->tx_queue_len.
To avoid handling race conditions with TX BH, we need to
deactivate all TX queues before change the value and bring them
back after we are done, this also makes implementation easier.
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose the number of times the link has been going UP or DOWN, and
update the "carrier_changes" counter to be the sum of these two events.
While at it, also update the sysfs-class-net documentation to cover:
carrier_changes (3.15), carrier_up_count (4.16) and carrier_down_count
(4.16)
Signed-off-by: David Decotigny <decot@googlers.com>
[Florian:
* rebase
* add documentation
* merge carrier_changes with up/down counters]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While working on fixing another bug, I ran into the following panic
on arm64 by simply attaching clsact qdisc, adding a filter and running
traffic on ingress to it:
[...]
[ 178.188591] Unable to handle kernel read from unreadable memory at virtual address 810fb501f000
[ 178.197314] Mem abort info:
[ 178.200121] ESR = 0x96000004
[ 178.203168] Exception class = DABT (current EL), IL = 32 bits
[ 178.209095] SET = 0, FnV = 0
[ 178.212157] EA = 0, S1PTW = 0
[ 178.215288] Data abort info:
[ 178.218175] ISV = 0, ISS = 0x00000004
[ 178.222019] CM = 0, WnR = 0
[ 178.224997] user pgtable: 4k pages, 48-bit VAs, pgd = 0000000023cb3f33
[ 178.231531] [0000810fb501f000] *pgd=0000000000000000
[ 178.236508] Internal error: Oops: 96000004 [#1] SMP
[...]
[ 178.311855] CPU: 73 PID: 2497 Comm: ping Tainted: G W 4.15.0-rc7+ #5
[ 178.319413] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB18A 03/31/2017
[ 178.326887] pstate: 60400005 (nZCv daif +PAN -UAO)
[ 178.331685] pc : __netif_receive_skb_core+0x49c/0xac8
[ 178.336728] lr : __netif_receive_skb+0x28/0x78
[ 178.341161] sp : ffff00002344b750
[ 178.344465] x29: ffff00002344b750 x28: ffff810fbdfd0580
[ 178.349769] x27: 0000000000000000 x26: ffff000009378000
[...]
[ 178.418715] x1 : 0000000000000054 x0 : 0000000000000000
[ 178.424020] Process ping (pid: 2497, stack limit = 0x000000009f0a3ff4)
[ 178.430537] Call trace:
[ 178.432976] __netif_receive_skb_core+0x49c/0xac8
[ 178.437670] __netif_receive_skb+0x28/0x78
[ 178.441757] process_backlog+0x9c/0x160
[ 178.445584] net_rx_action+0x2f8/0x3f0
[...]
Reason is that sch_ingress and sch_clsact are doing mini_qdisc_pair_init()
which sets up miniq pointers to cpu_{b,q}stats from the underlying qdisc.
Problem is that this cannot work since they are actually set up right after
the qdisc ->init() callback in qdisc_create(), so first packet going into
sch_handle_ingress() tries to call mini_qdisc_bstats_cpu_update() and we
therefore panic.
In order to fix this, allocation of {b,q}stats needs to happen before we
call into ->init(). In net-next, there's already such option through commit
d59f5ffa59 ("net: sched: a dflt qdisc may be used with per cpu stats").
However, the bug needs to be fixed in net still for 4.15. Thus, include
these bits to reduce any merge churn and reuse the static_flags field to
set TCQ_F_CPUSTATS, and remove the allocation from qdisc_create() since
there is no other user left. Prashant Bhole ran into the same issue but
for net-next, thus adding him below as well as co-author. Same issue was
also reported by Sandipan Das when using bcc.
Fixes: 46209401f8 ("net: core: introduce mini_Qdisc and eliminate usage of tp->q for clsact fastpath")
Reference: https://lists.iovisor.org/pipermail/iovisor-dev/2018-January/001190.html
Reported-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Co-authored-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Co-authored-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
When dev_requeue_skb() is called with bulked skb list, only the
first skb of the list will be requeued to qdisc layer, and leak
the others without free them.
TCP is broken due to skb leak since no free skb will be considered
as still in the host queue and never be retransmitted. This happend
when dev_requeue_skb() called from qdisc_restart().
qdisc_restart
|-- dequeue_skb
|-- sch_direct_xmit()
|-- dev_requeue_skb() <-- skb may bluked
Fix dev_requeue_skb() to requeue the full bluked list. Also change
to use __skb_queue_tail() in __dev_requeue_skb() to avoid skb out
of order.
Fixes: a53851e2c3 ("net: sched: explicit locking in gso_cpu fallback")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/ipv6/ip6_gre.c is a case of parallel adds.
include/trace/events/tcp.h is a little bit more tricky. The removal
of in-trace-macro ifdefs in 'net' paralleled with moving
show_tcp_state_name and friends over to include/trace/events/sock.h
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-12-22
1) Separate ESP handling from segmentation for GRO packets.
This unifies the IPsec GSO and non GSO codepath.
2) Add asynchronous callbacks for xfrm on layer 2. This
adds the necessary infrastructure to core networking.
3) Allow to use the layer2 IPsec GSO codepath for software
crypto, all infrastructure is there now.
4) Also allow IPsec GSO with software crypto for local sockets.
5) Don't require synchronous crypto fallback on IPsec offloading,
it is not needed anymore.
6) Check for xdo_dev_state_free and only call it if implemented.
From Shannon Nelson.
7) Check for the required add and delete functions when a driver
registers xdo_dev_ops. From Shannon Nelson.
8) Define xfrmdev_ops only with offload config.
From Shannon Nelson.
9) Update the xfrm stats documentation.
From Shannon Nelson.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The rcu_barrier_bh() in mini_qdisc_pair_swap() is to wait for
flying RCU callback installed by a previous mini_qdisc_pair_swap(),
however we miss it on the tp_head==NULL path, which leads to that
the RCU callback still uses miniq_old->rcu after it is freed together
with qdisc in qdisc_graft(). So just add it on that path too.
Fixes: 46209401f8 ("net: core: introduce mini_Qdisc and eliminate usage of tp->q for clsact fastpath ")
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for the function qdisc_create_dflt which is
a common used function in the tc subsystem. Callers which are interested
in the receiving error can assign extack to get a more detailed
information why qdisc_create_dflt failed. The function qdisc_create_dflt
will also call an init callback which can fail by any per-qdisc specific
handling.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for the function qdisc_alloc which is
a common used function in the tc subsystem. Callers which are interested
in the receiving error can assign extack to get a more detailed
information why qdisc_alloc failed.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds extack support for init callback to prepare per-qdisc
specific changes for extack.
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements asynchronous crypto callbacks
and a backlog handler that can be used when IPsec
is done at layer 2 in the TX path. It also extends
the skb validate functions so that we can update
the driver transmit return codes based on async
crypto operation or to indicate that we queued the
packet in a backlog queue.
Joint work with: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
First, the check of &q->ring.queue against NULL is wrong, it
is always false. We should check the value rather than the address.
Secondly, we need the same check in pfifo_fast_reset() too,
as both ->reset() and ->destroy() are called in qdisc_destroy().
Fixes: c5ad119fb6 ("net: sched: pfifo_fast use skb_array")
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This converts the pfifo_fast qdisc to use the skb_array data structure
and set the lockless qdisc bit. pfifo_fast is the first qdisc to support
the lockless bit that can be a child of a qdisc requiring locking. So
we add logic to clear the lock bit on initialization in these cases when
the qdisc graft operation occurs.
This also removes the logic used to pick the next band to dequeue from
and instead just checks a per priority array for packets from top priority
to lowest. This might need to be a bit more clever but seems to work
for now.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I can not think of any reason to pull the bad txq skb off the qdisc if
the txq we plan to send this on is still frozen. So check for frozen
queue first and abort before dequeuing either skb_bad_txq skb or
normal qdisc dequeue() skb.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to how gso is handled use skb list for skb_bad_tx this is
required with lockless qdiscs because we may have multiple cores
attempting to push skbs into skb_bad_tx concurrently
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In qdisc_graft_qdisc a "new" qdisc is attached and the 'qdisc_destroy'
operation is called on the old qdisc. The destroy operation will wait
a rcu grace period and call qdisc_rcu_free(). At which point
gso_cpu_skb is free'd along with all stats so no need to zero stats
and gso_cpu_skb from the graft operation itself.
Further after dropping the qdisc locks we can not continue to call
qdisc_reset before waiting an rcu grace period so that the qdisc is
detached from all cpus. By removing the qdisc_reset() here we get
the correct property of waiting an rcu grace period and letting the
qdisc_destroy operation clean up the qdisc correctly.
Note, a refcnt greater than 1 would cause the destroy operation to
be aborted however if this ever happened the reference to the qdisc
would be lost and we would have a memory leak.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This work is preparing the qdisc layer to support egress lockless
qdiscs. If we are running the egress qdisc lockless in the case we
overrun the netdev, for whatever reason, the netdev returns a busy
error code and the skb is parked on the gso_skb pointer. With many
cores all hitting this case at once its possible to have multiple
sk_buffs here so we turn gso_skb into a queue.
This should be the edge case and if we see this frequently then
the netdev/qdisc layer needs to back off.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable dflt qdisc support for per cpu stats before this patch a dflt
qdisc was required to use the global statistics qstats and bstats.
This adds a static flags field to qdisc_ops that is propagated
into qdisc->flags in qdisc allocate call. This allows the allocation
block to completely allocate the qdisc object so we don't have
dangling allocations after qdisc init.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sch_direct_xmit() uses qdisc_qlen as a return value but all call sites
of the routine only check if it is zero or not. Simplify the logic so
that we don't need to return an actual queue length value.
This introduces a case now where sch_direct_xmit would have returned
a qlen of zero but now it returns true. However in this case all
call sites of sch_direct_xmit will implement a dequeue() and get
a null skb and abort. This trades tracking qlen in the hotpath for
an extra dequeue operation. Overall this seems to be good for
performance.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a flag for queueing disciplines to indicate the stack
does not need to use the qdisc lock to protect operations. This can
be used to build lockless scheduling algorithms and improving
performance.
The flag is checked in the tx path and the qdisc lock is only taken
if it is not set. For now use a conditional if statement. Later we
could be more aggressive if it proves worthwhile and use a static key
or wrap this in a likely().
Also the lockless case drops the TCQ_F_CAN_BYPASS logic. The reason
for this is synchronizing a qlen counter across threads proves to
cost more than doing the enqueue/dequeue operations when tested with
pktgen.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently __qdisc_run calls qdisc_run_end() but does not call
qdisc_run_begin(). This makes it hard to track pairs of
qdisc_run_{begin,end} across function calls.
To simplify reading these code paths this patch moves begin/end calls
into qdisc_run().
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Macvlan devices are similar to vlans and do not update their
own trans_start. In order for arp monitoring to work for a bond device
when the slaves are macvlans, obtain its real device.
Signed-off-by: Chris Dion <christopher.dion@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In sch_handle_egress and sch_handle_ingress tp->q is used only in order
to update stats. So stats and filter list are the only things that are
needed in clsact qdisc fastpath processing. Introduce new mini_Qdisc
struct to hold those items. Also, introduce a helper to swap the
mini_Qdisc structures in case filter list head changes.
This removes need for tp->q usage without added overhead.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In qdisc_alloc() the dev_queue pointer was used without any checks
being performed. If qdisc_create() gets a null dev_queue pointer, it
just passes it along to qdisc_alloc(), leading to a crash. That
happens if a root qdisc implements select_queue() and returns a null
dev_queue pointer for an "invalid handle", for example, or if the
dev_queue associated with the parent qdisc is null.
This patch is in preparation for the next in this series, where
select_queue() is being added to mqprio and as it may return a null
dev_queue.
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Tested-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly. Add pointer back to Qdisc.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
SKB stored in qdisc->gso_skb also counted into backlog.
Some qdiscs don't reset backlog to zero in ->reset(),
for example sfq just dequeue and free all queued skb.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 2ccccf5fb4 ("net_sched: update hierarchical backlog too")
Signed-off-by: David S. Miller <davem@davemloft.net>
gen estimator has been rewritten in commit 1c0d32fde5
("net_sched: gen_estimator: complete rewrite of rate estimators"),
the caller no longer needs to wait for a grace period. So this
patch gets rid of it.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzkaller reported a refcount_t warning [1]
Issue here is that noop_qdisc refcnt was never really considered as
a true refcount, since qdisc_destroy() found TCQ_F_BUILTIN set :
if (qdisc->flags & TCQ_F_BUILTIN ||
!refcount_dec_and_test(&qdisc->refcnt)))
return;
Meaning that all atomic_inc() we did on noop_qdisc.refcnt were not
really needed, but harmless until refcount_t came.
To fix this problem, we simply need to not increment noop_qdisc.refcnt,
since we never decrement it.
[1]
refcount_t: increment on 0; use-after-free.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 21754 at lib/refcount.c:152 refcount_inc+0x47/0x50 lib/refcount.c:152
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 21754 Comm: syz-executor7 Not tainted 4.13.0-rc6+ #20
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
panic+0x1e4/0x417 kernel/panic.c:180
__warn+0x1c4/0x1d9 kernel/panic.c:541
report_bug+0x211/0x2d0 lib/bug.c:183
fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190
do_trap_no_signal arch/x86/kernel/traps.c:224 [inline]
do_trap+0x260/0x390 arch/x86/kernel/traps.c:273
do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323
invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:846
RIP: 0010:refcount_inc+0x47/0x50 lib/refcount.c:152
RSP: 0018:ffff8801c43477a0 EFLAGS: 00010282
RAX: 000000000000002b RBX: ffffffff86093c14 RCX: 0000000000000000
RDX: 000000000000002b RSI: ffffffff8159314e RDI: ffffed0038868ee8
RBP: ffff8801c43477a8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff86093ac0
R13: 0000000000000001 R14: ffff8801d0f3bac0 R15: dffffc0000000000
attach_default_qdiscs net/sched/sch_generic.c:792 [inline]
dev_activate+0x7d3/0xaa0 net/sched/sch_generic.c:833
__dev_open+0x227/0x330 net/core/dev.c:1380
__dev_change_flags+0x695/0x990 net/core/dev.c:6726
dev_change_flags+0x88/0x140 net/core/dev.c:6792
dev_ifsioc+0x5a6/0x930 net/core/dev_ioctl.c:256
dev_ioctl+0x2bc/0xf90 net/core/dev_ioctl.c:554
sock_do_ioctl+0x94/0xb0 net/socket.c:968
sock_ioctl+0x2c2/0x440 net/socket.c:1058
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
Fixes: 7b93640502 ("net, sched: convert Qdisc.refcnt from atomic_t to refcount_t")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Reshetova, Elena <elena.reshetova@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The main purpose of this tracepoint is to monitor bulk dequeue
in the network qdisc layer, as it cannot be deducted from the
existing qdisc stats.
The txq_state can be used for determining the reason for zero packet
dequeues, see enum netdev_queue_state_t.
Notice all packets doesn't necessary activate this tracepoint. As
qdiscs with flag TCQ_F_CAN_BYPASS, can directly invoke
sch_direct_xmit() when qdisc_qlen is zero.
Remember that perf record supports filters like:
perf record -e qdisc:qdisc_dequeue \
--filter 'ifindex == 4 && (packets > 1 || txq_state > 0)'
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts were simply overlapping changes. In the net/ipv4/route.c
case the code had simply moved around a little bit and the same fix
was made in both 'net' and 'net-next'.
In the net/sched/sch_generic.c case a fix in 'net' happened at
the same time that a new argument was added to qdisc_hash_add().
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry reported a crash when injecting faults in
attach_one_default_qdisc() and dev->qdisc is still
a noop_disc, the check before qdisc_hash_add() fails
to catch it because it tests NULL. We should test
against noop_qdisc since it is the default qdisc
at this point.
Fixes: 59cc1f61f0 ("net: sched: convert qdisc linked list to hashtable")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
The original reason [1] for having hidden qdiscs (potential scalability
issues in qdisc_match_from_root() with single linked list in case of large
amount of qdiscs) has been invalidated by 59cc1f61f0 ("net: sched: convert
qdisc linked list to hashtable").
This allows us for bringing more clarity and determinism into the dump by
making default pfifo qdiscs visible.
We're not turning this on by default though, at it was deemed [2] too
intrusive / unnecessary change of default behavior towards userspace.
Instead, TCA_DUMP_INVISIBLE netlink attribute is introduced, which allows
applications to request complete qdisc hierarchy dump, including the
ones that have always been implicit/invisible.
Singleton noop_qdisc stays invisible, as teaching the whole infrastructure
about singletons would require quite some surgery with very little gain
(seeing no qdisc or seeing noop qdisc in the dump is probably setting
the same user expectation).
[1] http://lkml.kernel.org/r/1460732328.10638.74.camel@edumazet-glaptop3.roam.corp.google.com
[2] http://lkml.kernel.org/r/20161021.105935.1907696543877061916.davem@davemloft.net
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oftenly, introducing side effects on packet processing on the other half
of the stack by adjusting one of TX/RX via sysctl is not desirable.
There are cases of demand for asymmetric, orthogonal configurability.
This holds true especially for nodes where RPS for RFS usage on top is
configured and therefore use the 'old dev_weight'. This is quite a
common base configuration setup nowadays, even with NICs of superior processing
support (e.g. aRFS).
A good example use case are nodes acting as noSQL data bases with a
large number of tiny requests and rather fewer but large packets as responses.
It's affordable to have large budget and rx dev_weights for the
requests. But as a side effect having this large a number on TX
processed in one run can overwhelm drivers.
This patch therefore introduces an independent configurability via sysctl to
userland.
Signed-off-by: Matthias Tafelmeier <matthias.tafelmeier@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Old code was hard to maintain, due to complex lock chains.
(We probably will be able to remove some kfree_rcu() in callers)
2) Using a single timer to update all estimators does not scale.
3) Code was buggy on 32bit kernel (WRITE_ONCE() on 64bit quantity
is not supposed to work well)
In this rewrite :
- I removed the RB tree that had to be scanned in
gen_estimator_active(). qdisc dumps should be much faster.
- Each estimator has its own timer.
- Estimations are maintained in net_rate_estimator structure,
instead of dirtying the qdisc. Minor, but part of the simplification.
- Reading the estimator uses RCU and a seqcount to provide proper
support for 32bit kernels.
- We reduce memory need when estimators are not used, since
we store a pointer, instead of the bytes/packets counters.
- xt_rateest_mt() no longer has to grab a spinlock.
(In the future, xt_rateest_tg() could be switched to per cpu counters)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change replaces sk_buff_head struct in Qdiscs with new qdisc_skb_head.
Its similar to the skb_buff_head api, but does not use skb->prev pointers.
Qdiscs will commonly enqueue at the tail of a list and dequeue at head.
While skb_buff_head works fine for this, enqueue/dequeue needs to also
adjust the prev pointer of next element.
The ->prev pointer is not required for qdiscs so we can just leave
it undefined and avoid one cacheline write access for en/dequeue.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Moves qdisc stat accouting to qdisc_dequeue_head.
The only direct caller of the __qdisc_dequeue_head version open-codes
this now.
This allows us to later use __qdisc_dequeue_head as a replacement
of __skb_dequeue() (which operates on sk_buff_head list).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
A followup change will replace the sk_buff_head in the qdisc
struct with a slightly different list.
Use of the sk_buff_head helpers will thus cause compiler
warnings.
Open-code these accesses in an extra change to ease review.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Song Liu