The rxrpc packet serial number cannot be safely used to compute out of
order ack packets for several reasons:
1. The allocation of serial numbers cannot be assumed to imply the order
by which acks are populated and transmitted. In some rxrpc
implementations, delayed acks and ping acks are transmitted
asynchronously to the receipt of data packets and so may be transmitted
out of order. As a result, they can race with idle acks.
2. Serial numbers are allocated by the rxrpc connection and not the call
and as such may wrap independently if multiple channels are in use.
In any case, what matters is whether the ack packet provides new
information relating to the bounds of the window (the firstPacket and
previousPacket in the ACK data).
Fix this by discarding packets that appear to wind back the window bounds
rather than on serial number procession.
Fixes: 298bc15b20 ("rxrpc: Only take the rwind and mtu values from latest ACK")
Signed-off-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trace received calls that are aborted due to a connection abort, typically
because of authentication failure. Without this, connection aborts don't
show up in the trace log.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change rxrpc_queue_packet()'s signature so that it can return any error
code it may encounter when trying to send the packet.
This allows the caller to eventually do something in case of error - though
it should be noted that the packet has been queued and a resend is
scheduled.
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make rxrpc_kernel_check_life() pass back the life counter through the
argument list and return true if the call has not yet completed.
Suggested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an ICMP or ICMPV6 error is received, the error will be attached
to the socket (sk_err) and the report function will get called.
Clear any pending error here by calling sock_error().
This would cause the following attempt to use the socket to fail with
the error code stored by the ICMP error, resulting in unexpected errors
with various side effects depending on the context.
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
KMSAN will complain if valid address length passed to bind() is shorter
than sizeof(struct sockaddr_rxrpc) bytes.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
clang produces a false-positive warning as it fails to notice
that "lost = true" implies that "ret" is initialized:
net/rxrpc/output.c:402:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (lost)
^~~~
net/rxrpc/output.c:437:6: note: uninitialized use occurs here
if (ret >= 0) {
^~~
net/rxrpc/output.c:402:2: note: remove the 'if' if its condition is always false
if (lost)
^~~~~~~~~
net/rxrpc/output.c:339:9: note: initialize the variable 'ret' to silence this warning
int ret, opt;
^
= 0
Rearrange the code to make that more obvious and avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rxrpc_get_client_conn() adds a new call to the front of the waiting_calls
queue if the connection it's going to use already exists. This is bad as
it allows calls to get starved out.
Fix this by adding to the tail instead.
Also change the other enqueue point in the same function to put it on the
front (ie. when we have a new connection). This makes the point that in
the case of a new connection the new call goes at the front (though it
doesn't actually matter since the queue should be unoccupied).
Fixes: 45025bceef ("rxrpc: Improve management and caching of client connection objects")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rxrpc_disconnect_client_call() reads the call's connection ID protocol
value (call->cid) as part of that function's variable declarations. This
is bad because it's not inside the locked section and so may race with
someone granting use of the channel to the call.
This manifests as an assertion failure (see below) where the call in the
presumed channel (0 because call->cid wasn't set when we read it) doesn't
match the call attached to the channel we were actually granted (if 1, 2 or
3).
Fix this by moving the read and dependent calculations inside of the
channel_lock section. Also, only set the channel number and pointer
variables if cid is not zero (ie. unset).
This problem can be induced by injecting an occasional error in
rxrpc_wait_for_channel() before the call to schedule().
Make two further changes also:
(1) Add a trace for wait failure in rxrpc_connect_call().
(2) Drop channel_lock before BUG'ing in the case of the assertion failure.
The failure causes a trace akin to the following:
rxrpc: Assertion failed - 18446612685268945920(0xffff8880beab8c00) == 18446612685268621312(0xffff8880bea69800) is false
------------[ cut here ]------------
kernel BUG at net/rxrpc/conn_client.c:824!
...
RIP: 0010:rxrpc_disconnect_client_call+0x2bf/0x99d
...
Call Trace:
rxrpc_connect_call+0x902/0x9b3
? wake_up_q+0x54/0x54
rxrpc_new_client_call+0x3a0/0x751
? rxrpc_kernel_begin_call+0x141/0x1bc
? afs_alloc_call+0x1b5/0x1b5
rxrpc_kernel_begin_call+0x141/0x1bc
afs_make_call+0x20c/0x525
? afs_alloc_call+0x1b5/0x1b5
? __lock_is_held+0x40/0x71
? lockdep_init_map+0xaf/0x193
? lockdep_init_map+0xaf/0x193
? __lock_is_held+0x40/0x71
? yfs_fs_fetch_data+0x33b/0x34a
yfs_fs_fetch_data+0x33b/0x34a
afs_fetch_data+0xdc/0x3b7
afs_read_dir+0x52d/0x97f
afs_dir_iterate+0xa0/0x661
? iterate_dir+0x63/0x141
iterate_dir+0xa2/0x141
ksys_getdents64+0x9f/0x11b
? filldir+0x111/0x111
? do_syscall_64+0x3e/0x1a0
__x64_sys_getdents64+0x16/0x19
do_syscall_64+0x7d/0x1a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 45025bceef ("rxrpc: Improve management and caching of client connection objects")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An ipvlan bug fix in 'net' conflicted with the abstraction away
of the IPV6 specific support in 'net-next'.
Similarly, a bug fix for mlx5 in 'net' conflicted with the flow
action conversion in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
The changes introduced to allow rxrpc calls to be retried creates an issue
when it comes to refcounting afs_call structs. The problem is that when
rxrpc_send_data() queues the last packet for an asynchronous call, the
following sequence can occur:
(1) The notify_end_tx callback is invoked which causes the state in the
afs_call to be changed from AFS_CALL_CL_REQUESTING or
AFS_CALL_SV_REPLYING.
(2) afs_deliver_to_call() can then process event notifications from rxrpc
on the async_work queue.
(3) Delivery of events, such as an abort from the server, can cause the
afs_call state to be changed to AFS_CALL_COMPLETE on async_work.
(4) For an asynchronous call, afs_process_async_call() notes that the call
is complete and tried to clean up all the refs on async_work.
(5) rxrpc_send_data() might return the amount of data transferred
(success) or an error - which could in turn reflect a local error or a
received error.
Synchronising the clean up after rxrpc_kernel_send_data() returns an error
with the asynchronous cleanup is then tricky to get right.
Mostly revert commit c038a58ccf. The two API
functions the original commit added aren't currently used. This makes
rxrpc_kernel_send_data() always return successfully if it queued the data
it was given.
Note that this doesn't affect synchronous calls since their Rx notification
function merely pokes a wait queue and does not refcounting. The
asynchronous call notification function *has* to do refcounting and pass a
ref over the work item to avoid the need to sync the workqueue in call
cleanup.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The life-checking function, which is used by kAFS to make sure that a call
is still live in the event of a pending signal, only samples the received
packet serial number counter; it doesn't actually provoke a change in the
counter, rather relying on the server to happen to give us a packet in the
time window.
Fix this by adding a function to force a ping to be transmitted.
kAFS then keeps track of whether there's been a stall, and if so, uses the
new function to ping the server, resetting the timeout to allow the reply
to come back.
If there's a stall, a ping and the call is *still* stalled in the same
place after another period, then the call will be aborted.
Fixes: bc5e3a546d ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Fixes: f4d15fb6f9 ("rxrpc: Provide functions for allowing cleaner handling of signals")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the network becomes (partially) unavailable, say by disabling IPv6, the
background ACK transmission routine can get itself into a tizzy by
proposing immediate ACK retransmission. Since we're in the call event
processor, that happens immediately without returning to the workqueue
manager.
The condition should clear after a while when either the network comes back
or the call times out.
Fix this by:
(1) When re-proposing an ACK on failed Tx, don't schedule it immediately.
This will allow a certain amount of time to elapse before we try
again.
(2) Enforce a return to the workqueue manager after a certain number of
iterations of the call processing loop.
(3) Add a backoff delay that increases the delay on deferred ACKs by a
jiffy per failed transmission to a limit of HZ. The backoff delay is
cleared on a successful return from kernel_sendmsg().
(4) Cancel calls immediately if the opening sendmsg fails. The layer
above can arrange retransmission or rotate to another server.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit dd979b4df8.
This broke tcp_poll for SMC fallback: An AF_SMC socket establishes an
internal TCP socket for the initial handshake with the remote peer.
Whenever the SMC connection can not be established this TCP socket is
used as a fallback. All socket operations on the SMC socket are then
forwarded to the TCP socket. In case of poll, the file->private_data
pointer references the SMC socket because the TCP socket has no file
assigned. This causes tcp_poll to wait on the wrong socket.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/sched/cls_api.c has overlapping changes to a call to
nlmsg_parse(), one (from 'net') added rtm_tca_policy instead of NULL
to the 5th argument, and another (from 'net-next') added cb->extack
instead of NULL to the 6th argument.
net/ipv4/ipmr_base.c is a case of a bug fix in 'net' being done to
code which moved (to mr_table_dump)) in 'net-next'. Thanks to David
Ahern for the heads up.
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a missing call to rxrpc_put_peer() on the main path through the
rxrpc_error_report() function. This manifests itself as a ref leak
whenever an ICMP packet or other error comes in.
In commit f334430316, the hand-off of the ref to a work item was removed
and was not replaced with a put.
Fixes: f334430316 ("rxrpc: Fix error distribution")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add /proc/net/rxrpc/peers to display the list of peers currently active.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The udpv6_encap_enable() function is part of the ipv6 code, and if that is
configured as a loadable module and rxrpc is built in then a build failure
will occur because the conditional check is wrong:
net/rxrpc/local_object.o: In function `rxrpc_lookup_local':
local_object.c:(.text+0x2688): undefined reference to `udpv6_encap_enable'
Use the correct config symbol (CONFIG_AF_RXRPC_IPV6) in the conditional
check rather than CONFIG_IPV6 as that will do the right thing.
Fixes: 5271953cad ("rxrpc: Use the UDP encap_rcv hook")
Reported-by: kbuild-all@01.org
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes gcc '-Wunused-but-set-variable' warning:
net/rxrpc/output.c: In function 'rxrpc_reject_packets':
net/rxrpc/output.c:527:11: warning:
variable 'ioc' set but not used [-Wunused-but-set-variable]
'ioc' is the correct kvec num when sending a BUSY (or an ABORT) response
packet.
Fixes: ece64fec16 ("rxrpc: Emit BUSY packets when supposed to rather than ABORTs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix an uninitialised variable introduced by the last patch. This can cause
a crash when a new call comes in to a local service, such as when an AFS
fileserver calls back to the local cache manager.
Fixes: c1e15b4944 ("rxrpc: Fix the packet reception routine")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts were easy to resolve using immediate context mostly,
except the cls_u32.c one where I simply too the entire HEAD
chunk.
Signed-off-by: David S. Miller <davem@davemloft.net>
The rxrpc_input_packet() function and its call tree was built around the
assumption that data_ready() handler called from UDP to inform a kernel
service that there is data to be had was non-reentrant. This means that
certain locking could be dispensed with.
This, however, turns out not to be the case with a multi-queue network card
that can deliver packets to multiple cpus simultaneously. Each of those
cpus can be in the rxrpc_input_packet() function at the same time.
Fix by adding or changing some structure members:
(1) Add peer->rtt_input_lock to serialise access to the RTT buffer.
(2) Make conn->service_id into a 32-bit variable so that it can be
cmpxchg'd on all arches.
(3) Add call->input_lock to serialise access to the Rx/Tx state. Note
that although the Rx and Tx states are (almost) entirely separate,
there's no point completing the separation and having separate locks
since it's a bi-phasal RPC protocol rather than a bi-direction
streaming protocol. Data transmission and data reception do not take
place simultaneously on any particular call.
and making the following functional changes:
(1) In rxrpc_input_data(), hold call->input_lock around the core to
prevent simultaneous producing of packets into the Rx ring and
updating of tracking state for a particular call.
(2) In rxrpc_input_ping_response(), only read call->ping_serial once, and
check it before checking RXRPC_CALL_PINGING as that's a cheaper test.
The bit test and bit clear can then be combined. No further locking
is needed here.
(3) In rxrpc_input_ack(), take call->input_lock after we've parsed much of
the ACK packet. The superseded ACK check is then done both before and
after the lock is taken.
The handing of ackinfo data is split, parsing before the lock is taken
and processing with it held. This is keyed on rxMTU being non-zero.
Congestion management is also done within the locked section.
(4) In rxrpc_input_ackall(), take call->input_lock around the Tx window
rotation. The ACKALL packet carries no information and is only really
useful after all packets have been transmitted since it's imprecise.
(5) In rxrpc_input_implicit_end_call(), we use rx->incoming_lock to
prevent calls being simultaneously implicitly ended on two cpus and
also to prevent any races with incoming call setup.
(6) In rxrpc_input_packet(), use cmpxchg() to effect the service upgrade
on a connection. It is only permitted to happen once for a
connection.
(7) In rxrpc_new_incoming_call(), we have to recheck the routing inside
rx->incoming_lock to see if someone else set up the call, connection
or peer whilst we were getting there. We can't trust the values from
the earlier routing check unless we pin refs on them - which we want
to avoid.
Further, we need to allow for an incoming call to have its state
changed on another CPU between us making it live and us adjusting it
because the conn is now in the RXRPC_CONN_SERVICE state.
(8) In rxrpc_peer_add_rtt(), take peer->rtt_input_lock around the access
to the RTT buffer. Don't need to lock around setting peer->rtt.
For reference, the inventory of state-accessing or state-altering functions
used by the packet input procedure is:
> rxrpc_input_packet()
* PACKET CHECKING
* ROUTING
> rxrpc_post_packet_to_local()
> rxrpc_find_connection_rcu() - uses RCU
> rxrpc_lookup_peer_rcu() - uses RCU
> rxrpc_find_service_conn_rcu() - uses RCU
> idr_find() - uses RCU
* CONNECTION-LEVEL PROCESSING
- Service upgrade
- Can only happen once per conn
! Changed to use cmpxchg
> rxrpc_post_packet_to_conn()
- Setting conn->hi_serial
- Probably safe not using locks
- Maybe use cmpxchg
* CALL-LEVEL PROCESSING
> Old-call checking
> rxrpc_input_implicit_end_call()
> rxrpc_call_completed()
> rxrpc_queue_call()
! Need to take rx->incoming_lock
> __rxrpc_disconnect_call()
> rxrpc_notify_socket()
> rxrpc_new_incoming_call()
- Uses rx->incoming_lock for the entire process
- Might be able to drop this earlier in favour of the call lock
> rxrpc_incoming_call()
! Conflicts with rxrpc_input_implicit_end_call()
> rxrpc_send_ping()
- Don't need locks to check rtt state
> rxrpc_propose_ACK
* PACKET DISTRIBUTION
> rxrpc_input_call_packet()
> rxrpc_input_data()
* QUEUE DATA PACKET ON CALL
> rxrpc_reduce_call_timer()
- Uses timer_reduce()
! Needs call->input_lock()
> rxrpc_receiving_reply()
! Needs locking around ack state
> rxrpc_rotate_tx_window()
> rxrpc_end_tx_phase()
> rxrpc_proto_abort()
> rxrpc_input_dup_data()
- Fills the Rx buffer
- rxrpc_propose_ACK()
- rxrpc_notify_socket()
> rxrpc_input_ack()
* APPLY ACK PACKET TO CALL AND DISCARD PACKET
> rxrpc_input_ping_response()
- Probably doesn't need any extra locking
! Need READ_ONCE() on call->ping_serial
> rxrpc_input_check_for_lost_ack()
- Takes call->lock to consult Tx buffer
> rxrpc_peer_add_rtt()
! Needs to take a lock (peer->rtt_input_lock)
! Could perhaps manage with cmpxchg() and xadd() instead
> rxrpc_input_requested_ack
- Consults Tx buffer
! Probably needs a lock
> rxrpc_peer_add_rtt()
> rxrpc_propose_ack()
> rxrpc_input_ackinfo()
- Changes call->tx_winsize
! Use cmpxchg to handle change
! Should perhaps track serial number
- Uses peer->lock to record MTU specification changes
> rxrpc_proto_abort()
! Need to take call->input_lock
> rxrpc_rotate_tx_window()
> rxrpc_end_tx_phase()
> rxrpc_input_soft_acks()
- Consults the Tx buffer
> rxrpc_congestion_management()
- Modifies the Tx annotations
! Needs call->input_lock()
> rxrpc_queue_call()
> rxrpc_input_abort()
* APPLY ABORT PACKET TO CALL AND DISCARD PACKET
> rxrpc_set_call_completion()
> rxrpc_notify_socket()
> rxrpc_input_ackall()
* APPLY ACKALL PACKET TO CALL AND DISCARD PACKET
! Need to take call->input_lock
> rxrpc_rotate_tx_window()
> rxrpc_end_tx_phase()
> rxrpc_reject_packet()
There are some functions used by the above that queue the packet, after
which the procedure is terminated:
- rxrpc_post_packet_to_local()
- local->event_queue is an sk_buff_head
- local->processor is a work_struct
- rxrpc_post_packet_to_conn()
- conn->rx_queue is an sk_buff_head
- conn->processor is a work_struct
- rxrpc_reject_packet()
- local->reject_queue is an sk_buff_head
- local->processor is a work_struct
And some that offload processing to process context:
- rxrpc_notify_socket()
- Uses RCU lock
- Uses call->notify_lock to call call->notify_rx
- Uses call->recvmsg_lock to queue recvmsg side
- rxrpc_queue_call()
- call->processor is a work_struct
- rxrpc_propose_ACK()
- Uses call->lock to wrap __rxrpc_propose_ACK()
And a bunch that complete a call, all of which use call->state_lock to
protect the call state:
- rxrpc_call_completed()
- rxrpc_set_call_completion()
- rxrpc_abort_call()
- rxrpc_proto_abort()
- Also uses rxrpc_queue_call()
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix connection-level abort handling to cache the abort and error codes
properly so that a new incoming call can be properly aborted if it races
with the parent connection being aborted by another CPU.
The abort_code and error parameters can then be dropped from
rxrpc_abort_calls().
Fixes: f5c17aaeb2 ("rxrpc: Calls should only have one terminal state")
Signed-off-by: David Howells <dhowells@redhat.com>
Move the out-of-order and duplicate ACK packet check to before the call to
rxrpc_input_ackinfo() so that the receive window size and MTU size are only
checked in the latest ACK packet and don't regress.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
Carry the call state out of the locked section in rxrpc_rotate_tx_window()
rather than sampling it afterwards. This is only used to select tracepoint
data, but could have changed by the time we do the tracepoint.
Signed-off-by: David Howells <dhowells@redhat.com>
We should only call the function to end a call's Tx phase if we rotated the
marked-last packet out of the transmission buffer.
Make rxrpc_rotate_tx_window() return an indication of whether it just
rotated the packet marked as the last out of the transmit buffer, carrying
the information out of the locked section in that function.
We can then check the return value instead of examining RXRPC_CALL_TX_LAST.
Fixes: 70790dbe3f ("rxrpc: Pass the last Tx packet marker in the annotation buffer")
Signed-off-by: David Howells <dhowells@redhat.com>
We don't need to take the RCU read lock in the rxrpc packet receive
function because it's held further up the stack in the IP input routine
around the UDP receive routines.
Fix this by dropping the RCU read lock calls from rxrpc_input_packet().
This simplifies the code.
Fixes: 70790dbe3f ("rxrpc: Pass the last Tx packet marker in the annotation buffer")
Signed-off-by: David Howells <dhowells@redhat.com>
Use the UDP encap_rcv hook to cut the bit out of the rxrpc packet reception
in which a packet is placed onto the UDP receive queue and then immediately
removed again by rxrpc. Going via the queue in this manner seems like it
should be unnecessary.
This does, however, require the invention of a value to place in encap_type
as that's one of the conditions to switch packets out to the encap_rcv
hook. Possibly the value doesn't actually matter for anything other than
sockopts on the UDP socket, which aren't accessible outside of rxrpc
anyway.
This seems to cut a bit of time out of the time elapsed between each
sk_buff being timestamped and turning up in rxrpc (the final number in the
following trace excerpts). I measured this by making the rxrpc_rx_packet
trace point print the time elapsed between the skb being timestamped and
the current time (in ns), e.g.:
... 424.278721: rxrpc_rx_packet: ... ACK 25026
So doing a 512MiB DIO read from my test server, with an unmodified kernel:
N min max sum mean stddev
27605 2626 7581 7.83992e+07 2840.04 181.029
and with the patch applied:
N min max sum mean stddev
27547 1895 12165 6.77461e+07 2459.29 255.02
Signed-off-by: David Howells <dhowells@redhat.com>
Fix the rxrpc_data_ready() function to pick up all packets and to not miss
any. There are two problems:
(1) The sk_data_ready pointer on the UDP socket is set *after* it is
bound. This means that it's open for business before we're ready to
dequeue packets and there's a tiny window exists in which a packet can
sneak onto the receive queue, but we never know about it.
Fix this by setting the pointers on the socket prior to binding it.
(2) skb_recv_udp() will return an error (such as ENETUNREACH) if there was
an error on the transmission side, even though we set the
sk_error_report hook. Because rxrpc_data_ready() returns immediately
in such a case, it never actually removes its packet from the receive
queue.
Fix this by abstracting out the UDP dequeuing and checksumming into a
separate function that keeps hammering on skb_recv_udp() until it
returns -EAGAIN, passing the packets extracted to the remainder of the
function.
and two potential problems:
(3) It might be possible in some circumstances or in the future for
packets to be being added to the UDP receive queue whilst rxrpc is
running consuming them, so the data_ready() handler might get called
less often than once per packet.
Allow for this by fully draining the queue on each call as (2).
(4) If a packet fails the checksum check, the code currently returns after
discarding the packet without checking for more.
Allow for this by fully draining the queue on each call as (2).
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Fix some refs to init_net that should've been changed to the appropriate
network namespace.
Fixes: 2baec2c3f8 ("rxrpc: Support network namespacing")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Allow the epoch value to be queried on a server connection. This is in the
rxrpc header of every packet for use in routing and is derived from the
client's state. It's also not supposed to change unless the client gets
restarted.
AFS can make use of this information to deduce whether a fileserver has
been restarted because the fileserver makes client calls to the filesystem
driver's cache manager to send notifications (ie. callback breaks) about
conflicting changes from other clients. These convey the fileserver's own
epoch value back to the filesystem.
Signed-off-by: David Howells <dhowells@redhat.com>
Allow the timestamp on the sk_buff holding the first DATA packet of a reply
to be queried. This can then be used as a base for the expiry time
calculation on the callback promise duration indicated by an operation
result.
Signed-off-by: David Howells <dhowells@redhat.com>
rxrpc_extract_addr_from_skb() doesn't use the argument that points to the
local endpoint, so remove the argument.
Signed-off-by: David Howells <dhowells@redhat.com>
AF_RXRPC opens an IPv6 socket through which to send and receive network
packets, both IPv6 and IPv4. It currently turns AF_INET addresses into
AF_INET-as-AF_INET6 addresses based on an assumption that this was
necessary; on further inspection of the code, however, it turns out that
the IPv6 code just farms packets aimed at AF_INET addresses out to the IPv4
code.
Fix AF_RXRPC to use AF_INET addresses directly when given them.
Fixes: 7b674e390e ("rxrpc: Fix IPv6 support")
Signed-off-by: David Howells <dhowells@redhat.com>
Print the data Tx trace line before transmitting so that it appears before
the trace lines indicating success or failure of the transmission. This
makes the trace log less confusing.
Signed-off-by: David Howells <dhowells@redhat.com>
rxrpc_lose_skb() is now exactly the same as rxrpc_free_skb(), so remove it
and use the latter instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net'
overlapped the renaming of a netlink attribute in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix error distribution by immediately delivering the errors to all the
affected calls rather than deferring them to a worker thread. The problem
with the latter is that retries and things can happen in the meantime when we
want to stop that sooner.
To this end:
(1) Stop the error distributor from removing calls from the error_targets
list so that peer->lock isn't needed to synchronise against other adds
and removals.
(2) Require the peer's error_targets list to be accessed with RCU, thereby
avoiding the need to take peer->lock over distribution.
(3) Don't attempt to affect a call's state if it is already marked complete.
Signed-off-by: David Howells <dhowells@redhat.com>
It seems that enabling IPV6_RECVERR on an IPv6 socket doesn't also turn on
IP_RECVERR, so neither local errors nor ICMP-transported remote errors from
IPv4 peer addresses are returned to the AF_RXRPC protocol.
Make the sockopt setting code in rxrpc_open_socket() fall through from the
AF_INET6 case to the AF_INET case to turn on all the AF_INET options too in
the AF_INET6 case.
Fixes: f2aeed3a59 ("rxrpc: Fix error reception on AF_INET6 sockets")
Signed-off-by: David Howells <dhowells@redhat.com>
Make the following changes to improve the robustness of the code that sets
up a new service call:
(1) Cache the rxrpc_sock struct obtained in rxrpc_data_ready() to do a
service ID check and pass that along to rxrpc_new_incoming_call().
This means that I can remove the check from rxrpc_new_incoming_call()
without the need to worry about the socket attached to the local
endpoint getting replaced - which would invalidate the check.
(2) Cache the rxrpc_peer struct, thereby allowing the peer search to be
done once. The peer is passed to rxrpc_new_incoming_call(), thereby
saving the need to repeat the search.
This also reduces the possibility of rxrpc_publish_service_conn()
BUG()'ing due to the detection of a duplicate connection, despite the
initial search done by rxrpc_find_connection_rcu() having turned up
nothing.
This BUG() shouldn't ever get hit since rxrpc_data_ready() *should* be
non-reentrant and the result of the initial search should still hold
true, but it has proven possible to hit.
I *think* this may be due to __rxrpc_lookup_peer_rcu() cutting short
the iteration over the hash table if it finds a matching peer with a
zero usage count, but I don't know for sure since it's only ever been
hit once that I know of.
Another possibility is that a bug in rxrpc_data_ready() that checked
the wrong byte in the header for the RXRPC_CLIENT_INITIATED flag
might've let through a packet that caused a spurious and invalid call
to be set up. That is addressed in another patch.
(3) Fix __rxrpc_lookup_peer_rcu() to skip peer records that have a zero
usage count rather than stopping and returning not found, just in case
there's another peer record behind it in the bucket.
(4) Don't search the peer records in rxrpc_alloc_incoming_call(), but
rather either use the peer cached in (2) or, if one wasn't found,
preemptively install a new one.
Fixes: 8496af50eb ("rxrpc: Use RCU to access a peer's service connection tree")
Signed-off-by: David Howells <dhowells@redhat.com>
Do more up-front checking on incoming packets to weed out invalid ones and
also ones aimed at services that we don't support.
Whilst we're at it, replace the clearing of call and skew if we don't find
a connection with just initialising the variables to zero at the top of the
function.
Signed-off-by: David Howells <dhowells@redhat.com>
In the input path, a received sk_buff can be marked for rejection by
setting RXRPC_SKB_MARK_* in skb->mark and, if needed, some auxiliary data
(such as an abort code) in skb->priority. The rejection is handled by
queueing the sk_buff up for dealing with in process context. The output
code reads the mark and priority and, theoretically, generates an
appropriate response packet.
However, if RXRPC_SKB_MARK_BUSY is set, this isn't noticed and an ABORT
message with a random abort code is generated (since skb->priority wasn't
set to anything).
Fix this by outputting the appropriate sort of packet.
Also, whilst we're at it, most of the marks are no longer used, so remove
them and rename the remaining two to something more obvious.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix RTT information gathering in AF_RXRPC by the following means:
(1) Enable Rx timestamping on the transport socket with SO_TIMESTAMPNS.
(2) If the sk_buff doesn't have a timestamp set when rxrpc_data_ready()
collects it, set it at that point.
(3) Allow ACKs to be requested on the last packet of a client call, but
not a service call. We need to be careful lest we undo:
bf7d620abf
Author: David Howells <dhowells@redhat.com>
Date: Thu Oct 6 08:11:51 2016 +0100
rxrpc: Don't request an ACK on the last DATA packet of a call's Tx phase
but that only really applies to service calls that we're handling,
since the client side gets to send the final ACK (or not).
(4) When about to transmit an ACK or DATA packet, record the Tx timestamp
before only; don't update the timestamp afterwards.
(5) Switch the ordering between recording the serial and recording the
timestamp to always set the serial number first. The serial number
shouldn't be seen referenced by an ACK packet until we've transmitted
the packet bearing it - so in the Rx path, we don't need the timestamp
until we've checked the serial number.
Fixes: cf1a6474f8 ("rxrpc: Add per-peer RTT tracker")
Signed-off-by: David Howells <dhowells@redhat.com>
There's a check in rxrpc_data_ready() that's checking the CLIENT_INITIATED
flag in the packet type field rather than in the packet flags field.
Fix this by creating a pair of helper functions to check whether the packet
is going to the client or to the server and use them generally.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
In the quest to remove all stack VLA usage from the kernel[1], this
replaces struct crypto_skcipher and SKCIPHER_REQUEST_ON_STACK() usage
with struct crypto_sync_skcipher and SYNC_SKCIPHER_REQUEST_ON_STACK(),
which uses a fixed stack size.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Cc: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
rxrpc_find_connection_rcu() initialises variable k twice with the same
information. Remove one of the initialisations.
Signed-off-by: David Howells <dhowells@redhat.com>
An SKB is not on a list if skb->next is NULL.
Codify this convention into a helper function and use it
where we are dequeueing an SKB and need to mark it as such.
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeffrey Altman