We've added a quirk to enable the recent Lenovo dock support, where it
overwrites the pin configs of NID 0x17 and 19, not only updating the
pin config cache. It works right after the boot, but the problem is
that the pin configs are occasionally cleared when the machine goes to
PM. Meanwhile the quirk writes the pin configs only at the pre-probe,
so this won't be applied any longer.
For addressing that issue, this patch moves the code to overwrite the
pin configs into HDA_FIXUP_ACT_INIT section so that it's always
applied at both probe and resume time.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195161
Fixes: 61fcf8ece9 ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The error checks on freq for a negative error return always fails because
freq is unsigned and can never be negative. Fix this by making freq a
signed long.
Detected with Coccinelle:
drivers/clocksource/fsl_ftm_timer.c:287:5-9: WARNING: Unsigned expression
compared with zero: freq <= 0
drivers/clocksource/fsl_ftm_timer.c:291:5-9: WARNING: Unsigned expression
compared with zero: freq <= 0
Fixes: 2529c3a330 ("clocksource: Add Freescale FlexTimer Module (FTM) timer support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: kernel-janitors@vger.kernel.org
Link: https://lkml.kernel.org/r/20180226113614.3092-1-colin.king@canonical.com
I noticed that with 4.16-rc1 LVDS output on A83T based TBS A711 tablet doesn't
work (there's output but it's garbled). I compared some older patches for LVDS
support with the mainlined ones and this change is missing from mainline Linux.
I don't know what the register does exactly and the harcoded register value
doesn't inspire much confidence that it will work in a general case, so I'm
sending this RFC.
This patch fixes the issue on A83T.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180222161217.23904-1-megous@megous.com
This patch fixes nvme queue cleanup if requesting an IRQ handler for
the queue's vector fails. It does this by resetting the cq_vector to
the uninitialized value of -1 so it is ignored for a controller reset.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
[changelog updates, removed misc whitespace changes]
Signed-off-by: Keith Busch <keith.busch@intel.com>
Some processor revisions do not support transactional memory, and
additionally kernel support can be disabled. In either case the
tm-trap test should be skipped, otherwise it will fail with a SIGILL.
Fixes: a08082f8e4 ("powerpc/selftests: Check endianness on trap in TM")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- fix memory accounting when reserved memory is in high memory region;
- fix DMA allocation from high memory.
-----BEGIN PGP SIGNATURE-----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=IRmt
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20180225' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes from Max Filippov:
"Two fixes for reserved memory/DMA buffers allocation in high memory on
xtensa architecture
- fix memory accounting when reserved memory is in high memory region
- fix DMA allocation from high memory"
* tag 'xtensa-20180225' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: support DMA buffers in high memory
xtensa: fix high memory/reserved memory collision
Pull x86 fixes from Thomas Gleixner:
"A small set of fixes:
- UAPI data type correction for hyperv
- correct the cpu cores field in /proc/cpuinfo on CPU hotplug
- return proper error code in the resctrl file system failure path to
avoid silent subsequent failures
- correct a subtle accounting issue in the new vector allocation code
which went unnoticed for a while and caused suspend/resume
failures"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations
x86/topology: Fix function name in documentation
x86/intel_rdt: Fix incorrect returned value when creating rdgroup sub-directory in resctrl file system
x86/apic/vector: Handle vector release on CPU unplug correctly
genirq/matrix: Handle CPU offlining proper
x86/headers/UAPI: Use __u64 instead of u64 in <uapi/asm/hyperv.h>
Pull perf fix from Thomas Gleixner:
"A single commit which shuts up a bogus GCC-8 warning"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()
Pull locking fixes from Thomas Gleixner:
"Three patches to fix memory ordering issues on ALPHA and a comment to
clarify the usage scope of a mutex internal function"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs
locking/xchg/alpha: Clean up barrier usage by using smp_mb() in place of __ASM__MB
locking/xchg/alpha: Add unconditional memory barrier to cmpxchg()
locking/mutex: Add comment to __mutex_owner() to deter usage
Pull cleanup patchlet from Thomas Gleixner:
"A single commit removing a bunch of bogus double semicolons all over
the tree"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide/trivial: Remove ';;$' typo noise
Hightlights include:
- Fix a broken cast in nfs4_callback_recallany()
- Fix an Oops during NFSv4 migration events
- make struct nlmclnt_fl_close_lock_ops static
-----BEGIN PGP SIGNATURE-----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=l2jv
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- fix a broken cast in nfs4_callback_recallany()
- fix an Oops during NFSv4 migration events
- make struct nlmclnt_fl_close_lock_ops static
* tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: make struct nlmclnt_fl_close_lock_ops static
nfs: system crashes after NFS4ERR_MOVED recovery
NFSv4: Fix broken cast in nfs4_callback_recallany()
There is a potential deadlock if mount/umount happens when
raid5_finish_reshape() tries to grow the size of emulated disk.
How the deadlock happens?
1) The raid5 resync thread finished reshape (expanding array).
2) The mount or umount thread holds VFS sb->s_umount lock and tries to
write through critical data into raid5 emulated block device. So it
waits for raid5 kernel thread handling stripes in order to finish it
I/Os.
3) In the routine of raid5 kernel thread, md_check_recovery() will be
called first in order to reap the raid5 resync thread. That is,
raid5_finish_reshape() will be called. In this function, it will try
to update conf and call VFS revalidate_disk() to grow the raid5
emulated block device. It will try to acquire VFS sb->s_umount lock.
The raid5 kernel thread cannot continue, so no one can handle mount/
umount I/Os (stripes). Once the write-through I/Os cannot be finished,
mount/umount will not release sb->s_umount lock. The deadlock happens.
The raid5 kernel thread is an emulated block device. It is responible to
handle I/Os (stripes) from upper layers. The emulated block device
should not request any I/Os on itself. That is, it should not call VFS
layer functions. (If it did, it will try to acquire VFS locks to
guarantee the I/Os sequence.) So we have the resync thread to send
resync I/O requests and to wait for the results.
For solving this potential deadlock, we can put the size growth of the
emulated block device as the final step of reshape thread.
2017/12/29:
Thanks to Guoqing Jiang <gqjiang@suse.com>,
we confirmed that there is the same deadlock issue in raid10. It's
reproducible and can be fixed by this patch. For raid10.c, we can remove
the similar code to prevent deadlock as well since they has been called
before.
Reported-by: Alex Wu <alexwu@synology.com>
Reviewed-by: Alex Wu <alexwu@synology.com>
Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
Some laptops such as the XPS 9360 support the intel-vbtn INT33D6
interface but don't initialize the bit that intel-vbtn uses to
represent switching tablet mode.
By running this only on real 2-in-1's it shouldn't cause false
positives.
Fixes: 30323fb6d5 ("Support tablet mode switch")
Reported-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Tested-by: Jeremy Cline <jeremy@jcline.org>
Tested-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
- Add an empty linux/compiler_types.h (now being included by kconfig.h)
- Add __GFP_ZERO
- Add kzalloc
- Test __GFP_DIRECT_RECLAIM instead of __GFP_NOWARN
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Add handling for a missing instruction in our 32-bit BPF JIT so that it can be
used for seccomp filtering.
Add a missing NULL pointer check before a function call in new EEH code.
Fix an error path in the new ocxl driver to correctly return EFAULT.
The support for the new ibm,drc-info device tree property turns out to need
several fixes, so for now we just stop advertising to firmware that we support
it until the bugs can be ironed out.
One fix for the new drmem code which was incorrectly modifying the device tree
in place.
Finally two fixes for the RFI flush support, so that firmware can advertise to
us that it should be disabled entirely so as not to affect performance.
Thanks to:
Bharata B Rao, Frederic Barrat, Juan J. Alvarez, Mark Lord, Michael Bringmann.
-----BEGIN PGP SIGNATURE-----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=mTqU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Add handling for a missing instruction in our 32-bit BPF JIT so that
it can be used for seccomp filtering.
- Add a missing NULL pointer check before a function call in new EEH
code.
- Fix an error path in the new ocxl driver to correctly return EFAULT.
- The support for the new ibm,drc-info device tree property turns out
to need several fixes, so for now we just stop advertising to
firmware that we support it until the bugs can be ironed out.
- One fix for the new drmem code which was incorrectly modifying the
device tree in place.
- Finally two fixes for the RFI flush support, so that firmware can
advertise to us that it should be disabled entirely so as not to
affect performance.
Thanks to: Bharata B Rao, Frederic Barrat, Juan J. Alvarez, Mark Lord,
Michael Bringmann.
* tag 'powerpc-4.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Support firmware disable of RFI flush
powerpc/pseries: Support firmware disable of RFI flush
powerpc/mm/drmem: Fix unexpected flag value in ibm,dynamic-memory-v2
powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access
powerpc/pseries: Revert support for ibm,drc-info devtree property
powerpc/pseries: Fix duplicate firmware feature for DRC_INFO
ocxl: Fix potential bad errno on irq allocation
powerpc/eeh: Fix crashes in eeh_report_resume()
When requeuing request, the domain token should have been freed
before re-inserting the request to io scheduler. Otherwise, the
assigned domain token will be leaked, and IO hang can be caused.
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__blk_mq_requeue_request() covers two cases:
- one is that the requeued request is added to hctx->dispatch, such as
blk_mq_dispatch_rq_list()
- another case is that the request is requeued to io scheduler, such as
blk_mq_requeue_request().
We should call io sched's .requeue_request callback only for the 2nd
case.
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Omar Sandoval <osandov@fb.com>
Fixes: bd166ef183 ("blk-mq-sched: add framework for MQ capable IO schedulers")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The capture interface doesn't work and the playback interface only
supports 48 kHz sampling rate even though it advertises more rates.
Signed-off-by: Erik Veijola <erik.veijola@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On some boards setting power_save to a non 0 value leads to clicking /
popping sounds when ever we enter/leave powersaving mode. Ideally we would
figure out how to avoid these sounds, but that is not always feasible.
This commit adds a blacklist for devices where powersaving is known to
cause problems and disables it on these devices.
Note I tried to put this blacklist in userspace first:
https://github.com/systemd/systemd/pull/8128
But the systemd maintainers rightfully pointed out that it would be
impossible to then later remove entries once we actually find a way to
make power-saving work on listed boards without issues. Having this list
in the kernel will allow removal of the blacklist entry in the same commit
which fixes the clicks / plops.
The blacklist only applies to the default power_save module-option value,
if a user explicitly sets the module-option then the blacklist is not
used.
[ added an ifdef CONFIG_PM for the build error -- tiwai]
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes the wrongly included dtsi file which
was breaking mainline support for Engicam i.CoreM6 DualLite/Solo RQS.
As per the board name, the correct file should be imx6dl.dtsi instead
of imx6q.dtsi
Reported-by: Michael Trimarchi <michael@amarulasolutions.com>
Suggested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shyam Saini <shyam@amarulasolutions.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Fixes: 7a9caba55a ("ARM: dts: imx6dl: Add Engicam i.CoreM6 DualLite/Solo RQS initial support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SEV LAUNCH_SECRET command fails with error code 'invalid param'
because we missed filling the guest and header system physical address
while issuing the command.
Fixes: 9f5b5b950a (KVM: SVM: Add support for SEV LAUNCH_SECRET command)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-kernel@vger.kernel.org
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
RSM instruction is used by the SMM handler to return from SMM mode.
Currently, rsm causes a #UD - which results in instruction fetch, decode,
and emulate. By installing the RSM intercept we can avoid the instruction
fetch since we know that #VMEXIT was due to rsm.
The patch is required for the SEV guest, because in case of SEV guest
memory is encrypted with guest-specific key and hypervisor will not
able to fetch the instruction bytes from the guest memory.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using the access_ok() to validate the input before issuing the SEV
command does not buy us anything in this case. If userland is
giving us a garbage pointer then copy_to_user() will catch it when we try
to return the measurement.
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: 0d0736f763 (KVM: SVM: Add support for KVM_SEV_LAUNCH_MEASURE ...)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-kernel@vger.kernel.org
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid traversing all the cpus for pv tlb flush when steal time
is disabled since pv tlb flush depends on the field in steal time
for shared data.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim KrÄmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The early_param() is only called during kernel initialization, So Linux
marks the functions of it with __init macro to save memory.
But it forgot to mark the parse_no_kvmapf/stealacc/kvmclock_vsyscall,
So, Make them __init as well.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: rkrcmar@redhat.com
Cc: kvm@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: x86@kernel.org
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guests on new hypersiors might set KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT
bit when enabling async_PF, but this bit is reserved on old hypervisors,
which results in a failure upon migration.
To avoid breaking different cases, we are checking for CPUID feature bit
before enabling the feature and nothing else.
Fixes: 52a5c155cf ("KVM: async_pf: Let guest support delivery of async_pf from guest mode")
Cc: <stable@vger.kernel.org>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the following sparse warning by moving the prototype
of kvm_arch_mmu_notifier_invalidate_range() to linux/kvm_host.h .
CHECK arch/s390/kvm/../../../virt/kvm/kvm_main.c
arch/s390/kvm/../../../virt/kvm/kvm_main.c:138:13: warning: symbol 'kvm_arch_mmu_notifier_invalidate_range' was not declared. Should it be static?
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the kvm_arch_irq_routing_update() prototype outside of
ifdef CONFIG_HAVE_KVM_EVENTFD guards to fix the following sparse warning:
arch/s390/kvm/../../../virt/kvm/irqchip.c:171:28: warning: symbol 'kvm_arch_irq_routing_update' was not declared. Should it be static?
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'Total' line looks a bit weird when we have a single event only. This
can happen e.g. due to filters. Therefore suppress when there's only a
single event in the output.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We keep the current logic that sorts all events (parent and child), but
re-shuffle the events afterwards, grouping the children after the
respective parent. Note that the percentage column for child events
gives the percentage of the parent's total.
Since we rework the logic anyway, we modify the total average
calculation to use the raw numbers instead of the (rounded) averages.
Note that this can result in differing numbers (between total average
and the sum of the individual averages) due to rounding errors.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drilldown (i.e. toggle display of child trace events) was implemented by
overriding the fields filter. This resulted in inconsistencies: E.g. when
drilldown was not active, adding a filter that also matches child trace
events would not only filter fields according to the filter, but also add
in the child trace events matching the filter. E.g. on x86, setting
'kvm_userspace_exit' as the fields filter after startup would result in
display of kvm_userspace_exit(DCR), although that wasn't previously
present - not exactly what one would expect from a filter.
This patch addresses the issue by keeping drilldown and fields filter
separate. While at it, we also fix a PEP8 issue by adding a blank line
at one place (since we're in the area...).
We implement this by adding a framework that also allows to define a
taxonomy among the debugfs events to identify child trace events. I.e.
drilldown using 'x' can now also work with debugfs. A respective parent-
child relationship is only known for S390 at the moment, but could be
added adjusting other platforms' ARCH.dbg_is_child() methods
accordingly.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can do with a single dialog that takes both, pids and guest names.
Note that we keep both interactive commands, 'p' and 'g' for now, to
avoid confusion among users used to a specific key.
While at it, we improve on some minor glitches regarding curses usage,
e.g. cursor still visible when not supposed to be.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Helps quite a bit reading the code when it's obvious when a method is
intended for internal use only.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Te checks for debugfs assumed that debugfs is always mounted at
/sys/kernel/debug - which is likely, but not guaranteed. This is addressed
by checking /proc/mounts for the actual location.
Furthermore, when debugfs was mounted, but the kvm module not loaded, a
misleading error pointing towards debugfs not present was given.
To reproduce,
(a) run kvm_stat with debugfs mounted at a place different from
/sys/kernel/debug
(b) run kvm_stat with debugfs mounted but kvm module not loaded
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Entering an invalid regular expression did not produce any indication of an
error so far.
To reproduce, press 'f' and enter 'foo(' (with an unescaped bracket).
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we apply a filter that will only leave child trace events, we
receive a ZeroDivisionError when calculating the percentages.
In that case, provide percentages based on child events only.
To reproduce, run 'kvm_stat -f .*[\(].*'.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use '==' for equality checks and 'is' when comparing identities.
An example where '==' and 'is' behave differently:
>>> a = 4242
>>> a == 4242
True
>>> a is 4242
False
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If it's clear that the values of a dictionary will be used then use
the '.items()' method.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
[Include fix for logging mode by Stefan Raspl]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a namedtuple for storing the values as it allows to access the
fields of a tuple via names. This makes the overall code much easier
to read and to understand. Access by index is still possible as
before.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'sortkey' function references a value in its enclosing
scope (closure). This is not common practice for a sort key function
so let's replace it. Additionally, the function 'sorted' has already a
parameter for reversing the result therefore the inversion of the
values is unneeded. The check for stats[x][1] is also superfluous as
it's ensured that this value is initialized with 0.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported by syzkaller:
WARNING: CPU: 6 PID: 2434 at arch/x86/kvm/vmx.c:6660 handle_ept_misconfig+0x54/0x1e0 [kvm_intel]
CPU: 6 PID: 2434 Comm: repro_test Not tainted 4.15.0+ #4
RIP: 0010:handle_ept_misconfig+0x54/0x1e0 [kvm_intel]
Call Trace:
vmx_handle_exit+0xbd/0xe20 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xdaf/0x1d50 [kvm]
kvm_vcpu_ioctl+0x3e9/0x720 [kvm]
do_vfs_ioctl+0xa4/0x6a0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x25/0x9c
The testcase creates a first thread to issue KVM_SMI ioctl, and then creates
a second thread to mmap and operate on the same vCPU. This triggers a race
condition when running the testcase with multiple threads. Sometimes one thread
exits with a triple fault while another thread mmaps and operates on the same
vCPU. Because CS=0x3000/IP=0x8000 is not mapped, accessing the SMI handler
results in an EPT misconfig. This patch fixes it by returning RET_PF_EMULATE
in kvm_handle_bad_page(), which will go on to cause an emulation failure and an
exit with KVM_EXIT_INTERNAL_ERROR.
Reported-by: syzbot+c1d9517cab094dae65e446c0c5b4de6c40f4dc58@syzkaller.appspotmail.com
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Although L2 is in halt state, it will be in the active state after
VM entry if the VM entry is vectoring according to SDM 26.6.2 Activity
State. Halting the vcpu here means the event won't be injected to L2
and this decision isn't reported to L1. Thus L0 drops an event that
should be injected to L2.
Cc: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>