On chown, reiserfs will call reiserfs_setattr() to change the owner
of the given inode, but it may also recursively call
reiserfs_setattr() to propagate the owner change to the private xattr
files for this inode.
Hence, the reiserfs lock may be acquired twice which is not wanted
as reiserfs_setattr() calls journal_begin() that is going to try to
relax the lock in order to safely acquire the journal mutex.
Using reiserfs_write_lock_once() from reiserfs_setattr() solves
the problem.
This fixes the following warning, that precedes a lockdep report.
WARNING: at fs/reiserfs/lock.c:95 reiserfs_lock_check_recursive+0x3f/0x50()
Hardware name: MS-7418
Unwanted recursive reiserfs lock!
Pid: 4189, comm: fsstress Not tainted 2.6.33-rc2-tip-atom+ #195
Call Trace:
[<c1178bff>] ? reiserfs_lock_check_recursive+0x3f/0x50
[<c1178bff>] ? reiserfs_lock_check_recursive+0x3f/0x50
[<c103f7ac>] warn_slowpath_common+0x6c/0xc0
[<c1178bff>] ? reiserfs_lock_check_recursive+0x3f/0x50
[<c103f84b>] warn_slowpath_fmt+0x2b/0x30
[<c1178bff>] reiserfs_lock_check_recursive+0x3f/0x50
[<c1172ae3>] do_journal_begin_r+0x83/0x350
[<c1172f2d>] journal_begin+0x7d/0x140
[<c106509a>] ? in_group_p+0x2a/0x30
[<c10fda71>] ? inode_change_ok+0x91/0x140
[<c115007d>] reiserfs_setattr+0x15d/0x2e0
[<c10f9bf3>] ? dput+0xe3/0x140
[<c1465adc>] ? _raw_spin_unlock+0x2c/0x50
[<c117831d>] chown_one_xattr+0xd/0x10
[<c11780a3>] reiserfs_for_each_xattr+0x113/0x2c0
[<c1178310>] ? chown_one_xattr+0x0/0x10
[<c14641e9>] ? mutex_lock_nested+0x2a9/0x350
[<c117826f>] reiserfs_chown_xattrs+0x1f/0x60
[<c106509a>] ? in_group_p+0x2a/0x30
[<c10fda71>] ? inode_change_ok+0x91/0x140
[<c1150046>] reiserfs_setattr+0x126/0x2e0
[<c1177c20>] ? reiserfs_getxattr+0x0/0x90
[<c11b0d57>] ? cap_inode_need_killpriv+0x37/0x50
[<c10fde01>] notify_change+0x151/0x330
[<c10e659f>] chown_common+0x6f/0x90
[<c10e67bd>] sys_lchown+0x6d/0x80
[<c1002ccc>] sysenter_do_call+0x12/0x32
---[ end trace 7c2b77224c1442fc ]---
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
It can happen that write does not use all the blocks allocated in
write_begin either because of some filesystem error (like ENOSPC) or
because page with data to write has been removed from memory. We truncate
these blocks so that we don't have dangling blocks beyond i_size.
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we were using the bkl, we didn't care about dependencies against
other locks, but the mutex conversion created new ones, which is why
we have reiserfs_mutex_lock_safe(), which unlocks the reiserfs lock
before acquiring another mutex.
But this trick actually fails if we have acquired the reiserfs lock
recursively, as we try to unlock it to acquire the new mutex without
inverted dependency, but we eventually only decrease its depth.
This happens in the case of a nested inode creation/deletion.
Say we have no space left on the device, we create an inode
and tak the lock but fail to create its entry, then we release the
inode using iput(), which calls reiserfs_delete_inode() that takes
the reiserfs lock recursively. The path eventually ends up in
journal_begin() where we try to take the journal safely but we
fail because of the reiserfs lock recursion:
[ INFO: possible circular locking dependency detected ]
2.6.32-06486-g053fe57 #2
-------------------------------------------------------
vi/23454 is trying to acquire lock:
(&journal->j_mutex){+.+...}, at: [<c110dac4>] do_journal_begin_r+0x64/0x2f0
but task is already holding lock:
(&REISERFS_SB(s)->lock){+.+.+.}, at: [<c11106a8>] reiserfs_write_lock+0x28/0x40
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&REISERFS_SB(s)->lock){+.+.+.}:
[<c104f8f3>] validate_chain+0xa23/0xf70
[<c1050325>] __lock_acquire+0x4e5/0xa70
[<c105092a>] lock_acquire+0x7a/0xa0
[<c134c78f>] mutex_lock_nested+0x5f/0x2b0
[<c11106a8>] reiserfs_write_lock+0x28/0x40
[<c110dacb>] do_journal_begin_r+0x6b/0x2f0
[<c110ddcf>] journal_begin+0x7f/0x120
[<c10f76c2>] reiserfs_remount+0x212/0x4d0
[<c1093997>] do_remount_sb+0x67/0x140
[<c10a9ca6>] do_mount+0x436/0x6b0
[<c10a9f86>] sys_mount+0x66/0xa0
[<c1002c50>] sysenter_do_call+0x12/0x36
-> #0 (&journal->j_mutex){+.+...}:
[<c104fe38>] validate_chain+0xf68/0xf70
[<c1050325>] __lock_acquire+0x4e5/0xa70
[<c105092a>] lock_acquire+0x7a/0xa0
[<c134c78f>] mutex_lock_nested+0x5f/0x2b0
[<c110dac4>] do_journal_begin_r+0x64/0x2f0
[<c110ddcf>] journal_begin+0x7f/0x120
[<c10ef52f>] reiserfs_delete_inode+0x9f/0x140
[<c10a55fc>] generic_delete_inode+0x9c/0x150
[<c10a56ed>] generic_drop_inode+0x3d/0x60
[<c10a4607>] iput+0x47/0x50
[<c10e915c>] reiserfs_create+0x16c/0x1c0
[<c109a9c1>] vfs_create+0xc1/0x130
[<c109dbec>] do_filp_open+0x81c/0x920
[<c109004f>] do_sys_open+0x4f/0x110
[<c1090179>] sys_open+0x29/0x40
[<c1002c50>] sysenter_do_call+0x12/0x36
other info that might help us debug this:
2 locks held by vi/23454:
#0: (&sb->s_type->i_mutex_key#5){+.+.+.}, at: [<c109d64e>]
do_filp_open+0x27e/0x920
#1: (&REISERFS_SB(s)->lock){+.+.+.}, at: [<c11106a8>]
reiserfs_write_lock+0x28/0x40
stack backtrace:
Pid: 23454, comm: vi Not tainted 2.6.32-06486-g053fe57 #2
Call Trace:
[<c134b202>] ? printk+0x18/0x1e
[<c104e960>] print_circular_bug+0xc0/0xd0
[<c104fe38>] validate_chain+0xf68/0xf70
[<c104ca9b>] ? trace_hardirqs_off+0xb/0x10
[<c1050325>] __lock_acquire+0x4e5/0xa70
[<c105092a>] lock_acquire+0x7a/0xa0
[<c110dac4>] ? do_journal_begin_r+0x64/0x2f0
[<c134c78f>] mutex_lock_nested+0x5f/0x2b0
[<c110dac4>] ? do_journal_begin_r+0x64/0x2f0
[<c110dac4>] ? do_journal_begin_r+0x64/0x2f0
[<c110ff80>] ? delete_one_xattr+0x0/0x1c0
[<c110dac4>] do_journal_begin_r+0x64/0x2f0
[<c110ddcf>] journal_begin+0x7f/0x120
[<c11105b5>] ? reiserfs_delete_xattrs+0x15/0x50
[<c10ef52f>] reiserfs_delete_inode+0x9f/0x140
[<c10a55bf>] ? generic_delete_inode+0x5f/0x150
[<c10ef490>] ? reiserfs_delete_inode+0x0/0x140
[<c10a55fc>] generic_delete_inode+0x9c/0x150
[<c10a56ed>] generic_drop_inode+0x3d/0x60
[<c10a4607>] iput+0x47/0x50
[<c10e915c>] reiserfs_create+0x16c/0x1c0
[<c1099a5d>] ? inode_permission+0x7d/0xa0
[<c109a9c1>] vfs_create+0xc1/0x130
[<c10e8ff0>] ? reiserfs_create+0x0/0x1c0
[<c109dbec>] do_filp_open+0x81c/0x920
[<c104ca9b>] ? trace_hardirqs_off+0xb/0x10
[<c134dc0d>] ? _spin_unlock+0x1d/0x20
[<c10a6eea>] ? alloc_fd+0xba/0xf0
[<c109004f>] do_sys_open+0x4f/0x110
[<c1090179>] sys_open+0x29/0x40
[<c1002c50>] sysenter_do_call+0x12/0x36
To fix this, use reiserfs_lock_once() from reiserfs_delete_inode()
which prevents from adding reiserfs lock recursion.
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
GFP_ATOMIC was used in reiserfs_get_block to not lose the Bkl so that
nobody can modify the tree in the middle of its work. Now that we
kicked out the bkl, we can use a more friendly flag. We use GFP_NOFS
here because we already hold the reiserfs lock.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Laurent Riffard <laurent.riffard@free.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
We had a watchdog in _get_block_create_0() that jumped to a fixup retry
path in case the bkl got relaxed while calling kmap().
This is not necessary anymore since we now have a reiserfs lock that is
not implicitly relaxed while sleeping.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Laurent Riffard <laurent.riffard@free.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
reiserfs_commit_write() is always called with the write lock held.
Thus the current calls to reiserfs_write_lock() in this function are
acquiring the lock recursively.
We can safely drop them.
This also solves further assumptions for this lock to be really
released while calling reiserfs_write_unlock().
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Laurent Riffard <laurent.riffard@free.fr>
reiserfs_write_end() is a hot path in reiserfs.
We have two wasteful write lock lock/release inside that can be gathered
without changing the code logic.
This patch factorizes them out in a single protected section, reducing the
number of contentions inside.
[ Impact: reduce lock contention in a reiserfs hotpath ]
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
reiserfs_get_block() is one of these sites where the write lock might
be acquired recursively.
It's a particular problem because this function is called very often.
It's a hot spot which needs to reschedule() periodically while converting
direct items to indirect ones because it can take some time.
Then if we are applying the write lock release/reacquire pattern on
schedule() here, it may not produce the desired effect since we may have
locked in more than one depth.
The solution is to use reiserfs_write_lock_once() which won't try
to reacquire the lock recursively. Then the lock will be *really*
released before schedule().
Also, we only release the lock if TIF_NEED_RESCHED is set to not
create wasteful numerous contentions.
[ Impact: fix a too long holded lock case in reiserfs_get_block() ]
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Impact: fix a deadlock
reiserfs_truncate_file() can be called from multiple context where
the write lock can be already hold or not.
This function also acquire (possibly recursively) the write
lock. Subsequent releases before sleeping will not actually release
the lock because we may be in more than one lock depth degree.
A typical case is:
reiserfs_file_release {
acquire_the_lock()
reiserfs_truncate_file()
reacquire_the_lock()
journal_begin() {
do_journal_begin_r() {
reiserfs_wait_on_write_block() {
/*
* Not released because still one
* depth owned
*/
release_lock()
wait_for_event()
At this stage the event never happen because the one which provides
it needs the write lock.
We use reiserfs_write_lock_once() here to ensure that we don't acquire the
write lock recursively.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@texware.it>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
LKML-Reference: <1239680065-25013-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch is an attempt to remove the Bkl based locking scheme from
reiserfs and is intended.
It is a bit inspired from an old attempt by Peter Zijlstra:
http://lkml.indiana.edu/hypermail/linux/kernel/0704.2/2174.html
The bkl is heavily used in this filesystem to prevent from
concurrent write accesses on the filesystem.
Reiserfs makes a deep use of the specific properties of the Bkl:
- It can be acqquired recursively by a same task
- It is released on the schedule() calls and reacquired when schedule() returns
The two properties above are a roadmap for the reiserfs write locking so it's
very hard to simply replace it with a common mutex.
- We need a recursive-able locking unless we want to restructure several blocks
of the code.
- We need to identify the sites where the bkl was implictly relaxed
(schedule, wait, sync, etc...) so that we can in turn release and
reacquire our new lock explicitly.
Such implicit releases of the lock are often required to let other
resources producer/consumer do their job or we can suffer unexpected
starvations or deadlocks.
So the new lock that replaces the bkl here is a per superblock mutex with a
specific property: it can be acquired recursively by a same task, like the
bkl.
For such purpose, we integrate a lock owner and a lock depth field on the
superblock information structure.
The first axis on this patch is to turn reiserfs_write_(un)lock() function
into a wrapper to manage this mutex. Also some explicit calls to
lock_kernel() have been converted to reiserfs_write_lock() helpers.
The second axis is to find the important blocking sites (schedule...(),
wait_on_buffer(), sync_dirty_buffer(), etc...) and then apply an explicit
release of the write lock on these locations before blocking. Then we can
safely wait for those who can give us resources or those who need some.
Typically this is a fight between the current writer, the reiserfs workqueue
(aka the async commiter) and the pdflush threads.
The third axis is a consequence of the second. The write lock is usually
on top of a lock dependency chain which can include the journal lock, the
flush lock or the commit lock. So it's dangerous to release and trying to
reacquire the write lock while we still hold other locks.
This is fine with the bkl:
T1 T2
lock_kernel()
mutex_lock(A)
unlock_kernel()
// do something
lock_kernel()
mutex_lock(A) -> already locked by T1
schedule() (and then unlock_kernel())
lock_kernel()
mutex_unlock(A)
....
This is not fine with a mutex:
T1 T2
mutex_lock(write)
mutex_lock(A)
mutex_unlock(write)
// do something
mutex_lock(write)
mutex_lock(A) -> already locked by T1
schedule()
mutex_lock(write) -> already locked by T2
deadlock
The solution in this patch is to provide a helper which releases the write
lock and sleep a bit if we can't lock a mutex that depend on it. It's another
simulation of the bkl behaviour.
The last axis is to locate the fs callbacks that are called with the bkl held,
according to Documentation/filesystem/Locking.
Those are:
- reiserfs_remount
- reiserfs_fill_super
- reiserfs_put_super
Reiserfs didn't need to explicitly lock because of the context of these callbacks.
But now we must take care of that with the new locking.
After this patch, reiserfs suffers from a slight performance regression (for now).
On UP, a high volume write with dd reports an average of 27 MB/s instead
of 30 MB/s without the patch applied.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Bron Gondwana <brong@fastmail.fm>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
LKML-Reference: <1239070789-13354-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch is a simple s/p_s_inode/inode/g to the reiserfs code. This
is the third in a series of patches to rip out some of the awful
variable naming in reiserfs.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch strips trailing whitespace from the reiserfs code.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some time ago, some changes were made to make security inode attributes
be atomically written during inode creation. ReiserFS fell behind in
this area, but with the reworking of the xattr code, it's now fairly
easy to add.
The following patch adds the ability for security attributes to be added
automatically during inode creation.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Deadlocks are possible in the xattr code between the journal lock and the
xattr sems.
This patch implements journalling for xattr operations. The benefit is
twofold:
* It gets rid of the deadlock possibility by always ensuring that xattr
write operations are initiated inside a transaction.
* It corrects the problem where xattr backing files aren't considered any
differently than normal files, despite the fact they are metadata.
I discussed the added journal load with Chris Mason, and we decided that
since xattrs (versus other journal activity) is fairly rare, the introduction
of larger transactions to support journaled xattrs wouldn't be too big a deal.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the switch to using inode->i_mutex locking during lookups/creation
in the xattr root, the per-super xattr lock is no longer needed.
This patch removes it.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are a number of helper functions for marking a reiserfs inode
private that were leftover from reiserfs did its own thing wrt to
private inodes. S_PRIVATE has been in the kernel for some time, so this
patch removes the helpers and uses IS_PRIVATE instead.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch makes many paths that are currently using warnings to handle
the error.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ReiserFS panics can be somewhat inconsistent.
In some cases:
* a unique identifier may be associated with it
* the function name may be included
* the device may be printed separately
This patch aims to make warnings more consistent. reiserfs_warning() prints
the device name, so printing it a second time is not required. The function
name for a warning is always helpful in debugging, so it is now automatically
inserted into the output. Hans has stated that every warning should have
a unique identifier. Some cases lack them, others really shouldn't have them.
reiserfs_warning() now expects an id associated with each message. In the
rare case where one isn't needed, "" will suffice.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ReiserFS warnings can be somewhat inconsistent.
In some cases:
* a unique identifier may be associated with it
* the function name may be included
* the device may be printed separately
This patch aims to make warnings more consistent. reiserfs_warning() prints
the device name, so printing it a second time is not required. The function
name for a warning is always helpful in debugging, so it is now automatically
inserted into the output. Hans has stated that every warning should have
a unique identifier. Some cases lack them, others really shouldn't have them.
reiserfs_warning() now expects an id associated with each message. In the
rare case where one isn't needed, "" will suffice.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
inotify: fix type errors in interfaces
fix breakage in reiserfs_new_inode()
fix the treatment of jfs special inodes
vfs: remove duplicate code in get_fs_type()
add a vfs_fsync helper
sys_execve and sys_uselib do not call into fsnotify
zero i_uid/i_gid on inode allocation
inode->i_op is never NULL
ntfs: don't NULL i_op
isofs check for NULL ->i_op in root directory is dead code
affs: do not zero ->i_op
kill suid bit only for regular files
vfs: lseek(fd, 0, SEEK_CUR) race condition
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened. They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim. This bug could
cause filesystem deadlocks.
The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called. It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock. The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.
Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on
this flag in their write_begin function. Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).
This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a
random example).
[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org> [2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
untouched to the grab_cache_page_write_begin() function. That
just simplifies everybody, and may even allow future expansion of the
logic. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
... and the same for reiserfs. The difference here is that we need
insert_inode_locked4() to match iget5_locked().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Like the page lock change, this also requires name change, so convert the
raw test_and_set bitop to a trylock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the removal of struct file from the xattr code,
reiserfs_file_release() isn't used anymore, so the prealloc isn't
discarded. This causes hangs later down the line.
This patch adds it to reiserfs_delete_inode. In most cases it will be a
no-op due to it already having been called, but will avoid hangs with
xattrs.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simplify page cache zeroing of segments of pages through 3 functions
zero_user_segments(page, start1, end1, start2, end2)
Zeros two segments of the page. It takes the position where to
start and end the zeroing which avoids length calculations and
makes code clearer.
zero_user_segment(page, start, end)
Same for a single segment.
zero_user(page, start, length)
Length variant for the case where we know the length.
We remove the zero_user_page macro. Issues:
1. Its a macro. Inline functions are preferable.
2. The KM_USER0 macro is only defined for HIGHMEM.
Having to treat this special case everywhere makes the
code needlessly complex. The parameter for zeroing is always
KM_USER0 except in one single case that we open code.
Avoiding KM_USER0 makes a lot of code not having to be dealing
with the special casing for HIGHMEM anymore. Dealing with
kmap is only necessary for HIGHMEM configurations. In those
configurations we use KM_USER0 like we do for a series of other
functions defined in highmem.h.
Since KM_USER0 is depends on HIGHMEM the existing zero_user_page
function could not be a macro. zero_user_* functions introduced
here can be be inline because that constant is not used when these
functions are called.
Also extract the flushing of the caches to be outside of the kmap.
[akpm@linux-foundation.org: fix nfs and ntfs build]
[akpm@linux-foundation.org: fix ntfs build some more]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Another nice little cleanup by using the new methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do a quick signedness check for block numbers. There are a number of places
where signed integers are used for block numbers, which limits the usable file
system size to 8 TiB. The disk format, excepting a problem which will be
fixed in the following patch, supports file systems up to 16 TiB in size.
This patch cleans up those sites so that we can enable the full usable size.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
reiserfs_setattr can call notify_change recursively using the same
iattr struct. This could cause it to trip the BUG() in notify_change.
Fix reiserfs to clear those bits near the beginning of the function.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- remove the following no longer used functions:
- bitmap.c: reiserfs_claim_blocks_to_be_allocated()
- bitmap.c: reiserfs_release_claimed_blocks()
- bitmap.c: reiserfs_can_fit_pages()
- make the following functions static:
- inode.c: restart_transaction()
- journal.c: reiserfs_async_progress_wait()
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Vladimir V. Saveliev <vs@namesys.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch makes reiserfs to use AOP_FLAG_CONT_EXPAND
in order to get rid of the special generic_cont_expand routine
Signed-off-by: Vladimir Saveliev <vs@namesys.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert reiserfs to new aops
Signed-off-by: Vladimir Saveliev <vs@namesys.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
currently the export_operation structure and helpers related to it are in
fs.h. fs.h is already far too large and there are very few places needing the
export bits, so split them off into a separate header.
[akpm@linux-foundation.org: fix cifs build]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use zero_user_page() instead of open-coding it.
Signed-off-by: Nate Diller <nate.diller@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes a confusion reiserfs has for a long time.
On release file operation reiserfs used to try to pack file data stored in
last incomplete page of some files into metadata blocks. After packing the
page got cleared with clear_page_dirty. It did not take into account that
the page may be mmaped into other process's address space. Recent
replacement for clear_page_dirty cancel_dirty_page found the confusion with
sanity check that page has to be not mapped.
The patch fixes the confusion by making reiserfs avoid tail packing if an
inode was ever mmapped. reiserfs_mmap and reiserfs_file_release are
serialized with mutex in reiserfs specific inode. reiserfs_mmap locks the
mutex and sets a bit in reiserfs specific inode flags.
reiserfs_file_release checks the bit having the mutex locked. If bit is
set - tail packing is avoided. This eliminates a possibility that mmapped
page gets cancel_page_dirty-ed.
Signed-off-by: Vladimir Saveliev <vs@namesys.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <mason@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename Reiserfs's struct path to struct treepath to prevent name collision
between it and struct path from fs/namei.c.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
One of our test team hit a reiserfs_panic while running fsstress tests on
2.6.19-rc1. The message looks like :
REISERFS: panic(device Null superblock):
reiserfs[5676]: assertion !(p->path_length != 1 ) failed at
fs/reiserfs/stree.c:397:reiserfs_check_path: path not properly relsed.
The backtrace looked :
kernel BUG in reiserfs_panic at fs/reiserfs/prints.c:361!
.reiserfs_check_path+0x58/0x74
.reiserfs_get_block+0x1444/0x1508
.__block_prepare_write+0x1c8/0x558
.block_prepare_write+0x34/0x64
.reiserfs_prepare_write+0x118/0x1d0
.generic_file_buffered_write+0x314/0x82c
.__generic_file_aio_write_nolock+0x350/0x3e0
.__generic_file_write_nolock+0x78/0xb0
.generic_file_write+0x60/0xf0
.reiserfs_file_write+0x198/0x2038
.vfs_write+0xd0/0x1b4
.sys_write+0x4c/0x8c
syscall_exit+0x0/0x4
Upon debugging I found that the restart_transaction was not releasing
the path if the th->refcount was > 1.
/*static*/
int restart_transaction(struct reiserfs_transaction_handle *th,
struct inode *inode, struct path *path)
{
[...]
/* we cannot restart while nested */
if (th->t_refcount > 1) { <<- Path is not released in this case!
return 0;
}
pathrelse(path); <<- Path released here.
[...]
This could happen in such a situation :
In reiserfs/inode.c: reiserfs_get_block() ::
if (repeat == NO_DISK_SPACE || repeat == QUOTA_EXCEEDED) {
/* restart the transaction to give the journal a chance to free
** some blocks. releases the path, so we have to go back to
** research if we succeed on the second try
*/
SB_JOURNAL(inode->i_sb)->j_next_async_flush = 1;
-->> retval = restart_transaction(th, inode, &path); <<--
We are supposed to release the path, no matter we succeed or fail. But
if the th->refcount is > 1, the path is still valid. And,
if (retval)
goto failure;
repeat =
_allocate_block(th, block, inode,
&allocated_block_nr, NULL, create);
If the above allocate_block fails with NO_DISK_SPACE or QUOTA_EXCEEDED,
we would have path which is not released.
if (repeat != NO_DISK_SPACE && repeat != QUOTA_EXCEEDED) {
goto research;
}
if (repeat == QUOTA_EXCEEDED)
retval = -EDQUOT;
else
retval = -ENOSPC;
goto failure;
[...]
failure:
[...]
reiserfs_check_path(&path); << Panics here !
Attached here is a patch which could fix the issue.
fix reiserfs/inode.c : restart_transaction() to release the path in all
cases.
The restart_transaction() doesn't release the path when the the journal
handle has a refcount > 1. This would trigger a reiserfs_panic() if we
encounter an -ENOSPC / -EDQUOT in reiserfs_get_block().
Signed-off-by: Suzuki K P <suzuki@in.ibm.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Cc: <reiserfs-dev@namesys.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since all callers dereference dir, we dont need this check. Coverity id
#337.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This eliminates the i_blksize field from struct inode. Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.
Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.
[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
reiserfs_write_full_page does zero bytes in the file past eof, but it may
call get_block on those buffers as well. On machines where the page size
is larger than the blocksize, this can result in mmaped files incorrectly
growing up to a block boundary during writepage.
The fix is to avoid calling get_block for any blocks that are entirely past
eof
Signed-off-by: Chris Mason <mason@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Reiserfs does not update ctime and mtime on expanding truncate via
truncate(). This patch fixes it.
Signed-off-by: Vladimir Saveliev <vs@namesys.com>
Cc: Hans Reiser <reiser@namesys.com>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Same as with already do with the file operations: keep them in .rodata and
prevents people from doing runtime patching.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Now that get_block() can handle mapping multiple disk blocks, no need to have
->get_blocks(). This patch removes fs specific ->get_blocks() added for DIO
and makes it users use get_block() instead.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The return value of this function is never used, so let's be honest and
declare it as void.
Some places where invalidatepage returned 0, I have inserted comments
suggesting a BUG_ON.
[akpm@osdl.org: JBD BUG fix]
[akpm@osdl.org: rework for git-nfs]
[akpm@osdl.org: don't go BUG in block_invalidate_page()]
Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes bugs in reiserfs where unsigned integers were checked
whether they are less then 0.
Signed-off-by: Vladimir V. Saveliev <vs@namesys.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Hans Reiser <reiser@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In data=journal mode, reiserfs writepage needs to make sure not to trigger
transactions while being run under PF_MEMALLOC. This patch makes sure to
redirty the page instead of forcing a transaction start in this case.
Also, calling filemap_fdata* in order to trigger io on the block device can
cause lock inversions on the page lock. Instead, do simple batching from
flush_commit_list.
Signed-off-by: Chris Mason <mason@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
After a transaction has closed but before it has finished commit, there is
a window where data=ordered mode requires invalidatepage to pin pages
instead of freeing them. This patch fixes a race between the
invalidatepage checks and data=ordered writeback, and it also adds a check
to the reiserfs write_ordered_buffers routines to write any anonymous
buffers that were dirtied after its first writeback loop.
That bug works like this:
proc1: transaction closes and a new one starts
proc1: write_ordered_buffers starts processing data=ordered list
proc1: buffer A is cleaned and written
proc2: buffer A is dirtied by another process
proc2: File is truncated to zero, page A goes through invalidatepage
proc2: reiserfs_invalidatepage sees dirty buffer A with reiserfs
journal head, pins it
proc1: write_ordered_buffers frees the journal head on buffer A
At this point, buffer A stays dirty forever
Signed-off-by: Chris Mason <mason@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch converts the inode semaphore to a mutex. I have tested it on
XFS and compiled as much as one can consider on an ia64. Anyway your
luck with it might be different.
Modified-by: Ingo Molnar <mingo@elte.hu>
(finished the conversion)
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The following patch fixes a bug where if the journal is aborted, it can
leave a transaction open. The result will be a BUG when another code
path attempts to start a transaction and will get a "nesting into
different fs" error, since current->journal_info will be left non-NULL.
Original fix against SUSE kernel by Chris Mason <mason@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I now see another overflow in reiserfs that should lead to data corruptions
with files that are bigger than 4G under certain circumstances when using
mmap.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- ->releasepage() annotated (s/int/gfp_t), instances updated
- missing gfp_t in fs/* added
- fixed misannotation from the original sweep caught by bitwise checks:
XFS used __nocast both for gfp_t and for flags used by XFS allocator.
The latter left with unsigned int __nocast; we might want to add a
different type for those but for now let's leave them alone. That,
BTW, is a case when __nocast use had been actively confusing - it had
been used in the same code for two different and similar types, with
no way to catch misuses. Switch of gfp_t to bitwise had caught that
immediately...
One tricky bit is left alone to be dealt with later - mapping->flags is
a mix of gfp_t and error indications. Left alone for now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
reiserfs should use mark_inode_dirty during reiserfs_file_write and
reiserfs_commit_write. This makes sure the inode is properly flagged as
dirty, which is used during O_SYNC to decide when to trigger log commits.
This patch also removes the O_SYNC check from reiserfs_commit_write, since
that gets dealt with properly at higher layers once we start using
mark_inode_dirty.
Thanks to Hifumi Hisashi <hifumi.hisashi@lab.ntt.co.jp> for catching this.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update the file systems in fs/ implementing a delete_inode() callback to
call truncate_inode_pages(). One implementation note: In developing this
patch I put the calls to truncate_inode_pages() at the very top of those
filesystems delete_inode() callbacks in order to retain the previous
behavior. I'm guessing that some of those could probably be optimized.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When i_acl_default is set to some error we do not hold the lock (hence we
are not allowed to drop it and reacquire later).
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <mason@suse.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
reiserfs_new_inode() can call iput() with the xattr lock held. This will
cause a deadlock to occur when reiserfs_delete_xattrs() is called to clean
up.
The following patch releases the lock and reacquires it after the iput.
This is safe because interaction with xattrs is complete, and the relock is
just to balance out the release in the caller.
The locking needs some reworking to be more sane, but that's more intrusive
and I was just looking to fix this bug.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This was a pure indentation change, using:
scripts/Lindent fs/reiserfs/*.c include/linux/reiserfs_*.h
to make reiserfs match the regular Linux indentation style. As Jeff
Mahoney <jeffm@suse.com> writes:
The ReiserFS code is a mix of a number of different coding styles, sometimes
different even from line-to-line. Since the code has been relatively stable
for quite some time and there are few outstanding patches to be applied, it
is time to reformat the code to conform to the Linux style standard outlined
in Documentation/CodingStyle.
This patch contains the result of running scripts/Lindent against
fs/reiserfs/*.c and include/linux/reiserfs_*.h. There are places where the
code can be made to look better, but I'd rather keep those patches separate
so that there isn't a subtle by-hand hand accident in the middle of a huge
patch. To be clear: This patch is reformatting *only*.
A number of patches may follow that continue to make the code more consistent
with the Linux coding style.
Hans wasn't particularly enthusiastic about these patches, but said he
wouldn't really oppose them either.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Reiserfs's readpage does not notice i/o errors. This patch makes
reiserfs_readpage to return -EIO when i/o error appears.
This patch makes reiserfs to not ignore I/O error on readpage.
Signed-off-by: Qu Fuping <fs@ercist.iscas.ac.cn>
Signed-off-by: Vladimir V. Saveliev <vs@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use improved credits estimates for quota operations. Also reserve space
for a quota operation in a transaction only if filesystem was mounted with
some quota option.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Check return values of journal_begin() and journal_end() in the quota code
for reiserfs.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
comp_short_keys() massaged into sane form, which kills the last place where
pointer to in_core_key (or any object containing such) would be cast to or
from something else. At that point we are free to change layout of
in_core_key - nothing depends on it anymore.
So we drop the mess with union in there and simply use (unconditional) __u64
k_offset and __u8 k_type instead; places using in_core_key switched to those.
That gives _far_ better code than current mess - on all platforms.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
little-endian objects annotated as such; again, obviously no changes of
resulting code, we only replace __u16 with __le16, etc. in relevant places.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!