Commit b84bbaf7a6 ("packet: in packet_snd start writing at link
layer allocation") ensures that packet_snd always starts writing
the link layer header in reserved headroom allocated for this
purpose.
This is needed because packets may be shorter than hard_header_len,
in which case the space up to hard_header_len may be zeroed. But
that necessary padding is not accounted for in skb->len.
The fix, however, is buggy. It calls skb_push, which grows skb->len
when moving skb->data back. But in this case packet length should not
change.
Instead, call skb_reserve, which moves both skb->data and skb->tail
back, without changing length.
Fixes: b84bbaf7a6 ("packet: in packet_snd start writing at link layer allocation")
Reported-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Three fixes for vmwgfx. Two are cc'd stable and fix host logging and its
error paths on 32-bit VMs. One is a fix for a hibernate flaw
introduced with the 4.17 merge window.
* 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Schedule an fb dirty update after resume
drm/vmwgfx: Fix host logging / guestinfo reading error paths
drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macros
Pull swiotlb fix from Konrad Rzeszutek Wilk:
"One single fix in here: under Xen the DMA32 heap (in the hypervisor)
would end up looking like swiss cheese.
The reason being that for every coherent DMA allocation we didn't do
the proper hypercall to tell Xen to return the page back to the DMA32
heap. End result was (eventually) no DMA32 space if you (for example)
continously unloaded and loaded modules"
* 'stable/for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent
Sandbox QP Commands are retired in the order they are sent. Outstanding
commands are stored in a linked-list in the order they appear. Once a
response is received and the callback gets called, we pull the first
element off the pending list, assuming they correspond.
Sending a message and adding it to the pending list is not done atomically,
hence there is an opportunity for a race between concurrent requests.
Bind both send and add under a critical section.
Fixes: bebb23e6cb ("net/mlx5: Accel, Add IPSec acceleration interface")
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Adi Nissim <adin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When RXFCS feature is enabled, the HW do not strip the FCS data,
however it is not present in the checksum calculated by the HW.
Fix that by manually calculating the FCS checksum and adding it to the SKB
checksum field.
Add helper function to find the FCS data for all SKB forms (linear,
one fragment or more).
Fixes: 102722fc68 ("net/mlx5e: Add support for RXFCS feature flag")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
- Remove bouncing addresses from the MAINTAINERS file
- Kernel oops and bad error handling fixes for hfi, i40iw, cxgb4, and hns drivers
- Various small LOC behavioral/operational bugs in mlx5, hns, qedr and i40iw drivers
- Two fixes for patches already sent during the merge window
- A long standing bug related to not decreasing the pinned pages count in the right
MM was found and fixed
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=uFZh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"This is pretty much just the usual array of smallish driver bugs.
- remove bouncing addresses from the MAINTAINERS file
- kernel oops and bad error handling fixes for hfi, i40iw, cxgb4, and
hns drivers
- various small LOC behavioral/operational bugs in mlx5, hns, qedr
and i40iw drivers
- two fixes for patches already sent during the merge window
- a long-standing bug related to not decreasing the pinned pages
count in the right MM was found and fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (28 commits)
RDMA/hns: Move the location for initializing tmp_len
RDMA/hns: Bugfix for cq record db for kernel
IB/uverbs: Fix uverbs_attr_get_obj
RDMA/qedr: Fix doorbell bar mapping for dpi > 1
IB/umem: Use the correct mm during ib_umem_release
iw_cxgb4: Fix an error handling path in 'c4iw_get_dma_mr()'
RDMA/i40iw: Avoid panic when reading back the IRQ affinity hint
RDMA/i40iw: Avoid reference leaks when processing the AEQ
RDMA/i40iw: Avoid panic when objects are being created and destroyed
RDMA/hns: Fix the bug with NULL pointer
RDMA/hns: Set NULL for __internal_mr
RDMA/hns: Enable inner_pa_vld filed of mpt
RDMA/hns: Set desc_dma_addr for zero when free cmq desc
RDMA/hns: Fix the bug with rq sge
RDMA/hns: Not support qp transition from reset to reset for hip06
RDMA/hns: Add return operation when configured global param fail
RDMA/hns: Update convert function of endian format
RDMA/hns: Load the RoCE dirver automatically
RDMA/hns: Bugfix for rq record db for kernel
RDMA/hns: Add rq inline flags judgement
...
-----BEGIN PGP SIGNATURE-----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=iYyx
-----END PGP SIGNATURE-----
Merge tag 'for-4.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A one-liner that prevents leaking an internal error value 1 out of the
ftruncate syscall.
This has been observed in practice. The steps to reproduce make a
common pattern (open/write/fync/ftruncate) but also need the
application to not check only for negative values and happens only for
compressed inlined files.
The conditions are narrow but as this could break userspace I think
it's better to merge it now and not wait for the merge window"
* tag 'for-4.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix error handling in btrfs_truncate()
Before commit 3b5b899ca6 ("ALSA: hda: Make use of core codec functions
to sync power state"), hda_set_power_state() returned the response to
the Get Power State verb, a 32-bit unsigned integer whose expected value
is 0x233 after transitioning a codec to D3, and 0x0 after transitioning
it to D0.
The response value is significant because hda_codec_runtime_suspend()
does not clear the codec's bit in the codec_powered bitmask unless the
AC_PWRST_CLK_STOP_OK bit (0x200) is set in the response value. That in
turn prevents the HDA controller from runtime suspending because
azx_runtime_idle() checks that the codec_powered bitmask is zero.
Since commit 3b5b899ca6, hda_set_power_state() only returns 0x0 or
0x1, thereby breaking runtime PM for any HDA controller. That's because
an inline function introduced by the commit returns a bool instead of a
32-bit unsigned int. The change was likely erroneous and resulted from
copying and pasting snd_hda_check_power_state(), which is immediately
preceding the newly introduced inline function. Fix it.
Link: https://bugs.freedesktop.org/show_bug.cgi?id=106597
Fixes: 3b5b899ca6 ("ALSA: hda: Make use of core codec functions to sync power state")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Abhijeet Kumar <abhijeet.kumar@intel.com>
Reported-and-tested-by: Gunnar Krüger <taijian@posteo.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts the following commits that change CMA design in MM.
3d2054ad8c ("ARM: CMA: avoid double mapping to the CMA area if CONFIG_HIGHMEM=y")
1d47a3ec09 ("mm/cma: remove ALLOC_CMA")
bad8c6c0b1 ("mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLE")
Ville reported a following error on i386.
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
microcode: microcode updated early to revision 0x4, date = 2013-06-28
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:00118000)
Initializing Movable for node 0 (00000001:00118000)
BUG: Bad page state in process swapper pfn:377fe
page:f53effc0 count:0 mapcount:-127 mapping:00000000 index:0x0
flags: 0x80000000()
raw: 80000000 00000000 00000000 ffffff80 00000000 00000100 00000200 00000001
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.17.0-rc5-elk+ #145
Hardware name: Dell Inc. Latitude E5410/03VXMC, BIOS A15 07/11/2013
Call Trace:
dump_stack+0x60/0x96
bad_page+0x9a/0x100
free_pages_check_bad+0x3f/0x60
free_pcppages_bulk+0x29d/0x5b0
free_unref_page_commit+0x84/0xb0
free_unref_page+0x3e/0x70
__free_pages+0x1d/0x20
free_highmem_page+0x19/0x40
add_highpages_with_active_regions+0xab/0xeb
set_highmem_pages_init+0x66/0x73
mem_init+0x1b/0x1d7
start_kernel+0x17a/0x363
i386_start_kernel+0x95/0x99
startup_32_smp+0x164/0x168
The reason for this error is that the span of MOVABLE_ZONE is extended
to whole node span for future CMA initialization, and, normal memory is
wrongly freed here. I submitted the fix and it seems to work, but,
another problem happened.
It's so late time to fix the later problem so I decide to reverting the
series.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If there is a possibility that a VM may migrate to a Skylake host,
then the hypervisor should report IA32_ARCH_CAPABILITIES.RSBA[bit 2]
as being set (future work, of course). This implies that
CPUID.(EAX=7,ECX=0):EDX.ARCH_CAPABILITIES[bit 29] should be
set. Therefore, kvm should report this CPUID bit as being supported
whether or not the host supports it. Userspace is still free to clear
the bit if it chooses.
For more information on RSBA, see Intel's white paper, "Retpoline: A
Branch Target Injection Mitigation" (Document Number 337131-001),
currently available at https://bugzilla.kernel.org/show_bug.cgi?id=199511.
Since the IA32_ARCH_CAPABILITIES MSR is emulated in kvm, there is no
dependency on hardware support for this feature.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Fixes: 28c1c9fabf ("KVM/VMX: Emulate MSR_IA32_ARCH_CAPABILITIES")
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Pull libata fixes from Tejun Heo:
"Nothing too interesting. Four patches to update the blacklist and
add a controller ID"
* 'for-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: Add PCI ID for Cannon Lake PCH-LP AHCI
libata: blacklist Micron 500IT SSD with MU01 firmware
libata: Apply NOLPM quirk for SAMSUNG PM830 CXM13D1Q.
libata: Blacklist some Sandisk SSDs for NCQ
The CPUID bits of OSXSAVE (function=0x1) and OSPKE (func=0x7, leaf=0x0)
allows user apps to detect if OS has set CR4.OSXSAVE or CR4.PKE. KVM is
supposed to update these CPUID bits when CR4 is updated. Current KVM
code doesn't handle some special cases when updates come from emulator.
Here is one example:
Step 1: guest boots
Step 2: guest OS enables XSAVE ==> CR4.OSXSAVE=1 and CPUID.OSXSAVE=1
Step 3: guest hot reboot ==> QEMU reset CR4 to 0, but CPUID.OSXAVE==1
Step 4: guest os checks CPUID.OSXAVE, detects 1, then executes xgetbv
Step 4 above will cause an #UD and guest crash because guest OS hasn't
turned on OSXAVE yet. This patch solves the problem by comparing the the
old_cr4 with cr4. If the related bits have been changed,
kvm_update_cpuid() needs to be called.
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Bandan Das <bsd@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QBaF
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180524' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two fixes that should go into this release:
- a loop writeback error clearing fix from Jeff
- the sr sense fix from myself"
* tag 'for-linus-20180524' of git://git.kernel.dk/linux-block:
loop: clear wb_err in bd_inode when detaching backing file
sr: pass down correctly sized SCSI sense buffer
Fix a regression from the 4.15 cycle that caused the system suspend
and resume overhead to increase on many systems and triggered more
serious problems on some of them (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=BS+S
-----END PGP SIGNATURE-----
Merge tag 'pm-4.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a regression from the 4.15 cycle that caused the system suspend
and resume overhead to increase on many systems and triggered more
serious problems on some of them (Rafael Wysocki)"
* tag 'pm-4.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / core: Fix direct_complete handling for devices with no callbacks
While reviewing the verifier code, I recently noticed that the
following two program variants in relation to tail calls can be
loaded.
Variant 1:
# bpftool p d x i 15
0: (15) if r1 == 0x0 goto pc+3
1: (18) r2 = map[id:5]
3: (05) goto pc+2
4: (18) r2 = map[id:6]
6: (b7) r3 = 7
7: (35) if r3 >= 0xa0 goto pc+2
8: (54) (u32) r3 &= (u32) 255
9: (85) call bpf_tail_call#12
10: (b7) r0 = 1
11: (95) exit
# bpftool m s i 5
5: prog_array flags 0x0
key 4B value 4B max_entries 4 memlock 4096B
# bpftool m s i 6
6: prog_array flags 0x0
key 4B value 4B max_entries 160 memlock 4096B
Variant 2:
# bpftool p d x i 20
0: (15) if r1 == 0x0 goto pc+3
1: (18) r2 = map[id:8]
3: (05) goto pc+2
4: (18) r2 = map[id:7]
6: (b7) r3 = 7
7: (35) if r3 >= 0x4 goto pc+2
8: (54) (u32) r3 &= (u32) 3
9: (85) call bpf_tail_call#12
10: (b7) r0 = 1
11: (95) exit
# bpftool m s i 8
8: prog_array flags 0x0
key 4B value 4B max_entries 160 memlock 4096B
# bpftool m s i 7
7: prog_array flags 0x0
key 4B value 4B max_entries 4 memlock 4096B
In both cases the index masking inserted by the verifier in order
to control out of bounds speculation from a CPU via b2157399cc
("bpf: prevent out-of-bounds speculation") seems to be incorrect
in what it is enforcing. In the 1st variant, the mask is applied
from the map with the significantly larger number of entries where
we would allow to a certain degree out of bounds speculation for
the smaller map, and in the 2nd variant where the mask is applied
from the map with the smaller number of entries, we get buggy
behavior since we truncate the index of the larger map.
The original intent from commit b2157399cc is to reject such
occasions where two or more different tail call maps are used
in the same tail call helper invocation. However, the check on
the BPF_MAP_PTR_POISON is never hit since we never poisoned the
saved pointer in the first place! We do this explicitly for map
lookups but in case of tail calls we basically used the tail
call map in insn_aux_data that was processed in the most recent
path which the verifier walked. Thus any prior path that stored
a pointer in insn_aux_data at the helper location was always
overridden.
Fix it by moving the map pointer poison logic into a small helper
that covers both BPF helpers with the same logic. After that in
fixup_bpf_calls() the poison check is then hit for tail calls
and the program rejected. Latter only happens in unprivileged
case since this is the *only* occasion where a rewrite needs to
happen, and where such rewrite is specific to the map (max_entries,
index_mask). In the privileged case the rewrite is generic for
the insn->imm / insn->code update so multiple maps from different
paths can be handled just fine since all the remaining logic
happens in the instruction processing itself. This is similar
to the case of map lookups: in case there is a collision of
maps in fixup_bpf_calls() we must skip the inlined rewrite since
this will turn the generic instruction sequence into a non-
generic one. Thus the patch_call_imm will simply update the
insn->imm location where the bpf_map_lookup_elem() will later
take care of the dispatch. Given we need this 'poison' state
as a check, the information of whether a map is an unpriv_array
gets lost, so enforcing it prior to that needs an additional
state. In general this check is needed since there are some
complex and tail call intensive BPF programs out there where
LLVM tends to generate such code occasionally. We therefore
convert the map_ptr rather into map_state to store all this
w/o extra memory overhead, and the bit whether one of the maps
involved in the collision was from an unpriv_array thus needs
to be retained as well there.
Fixes: b2157399cc ("bpf: prevent out-of-bounds speculation")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since 4.10, commit 8003c9ae20 (KVM: LAPIC: add APIC Timer
periodic/oneshot mode VMX preemption timer support), guests using
periodic LAPIC timers (such as FreeBSD 8.4) would see their timers
drift significantly over time.
Differences in the underlying clocks and numerical errors means the
periods of the two timers (hv and sw) are not the same. This
difference will accumulate with every expiry resulting in a large
error between the hv and sw timer.
This means the sw timer may be running slow when compared to the hv
timer. When the timer is switched from hv to sw, the now active sw
timer will expire late. The guest VCPU is reentered and it switches to
using the hv timer. This timer catches up, injecting multiple IRQs
into the guest (of which the guest only sees one as it does not get to
run until the hv timer has caught up) and thus the guest's timer rate
is low (and becomes increasing slower over time as the sw timer lags
further and further behind).
I believe a similar problem would occur if the hv timer is the slower
one, but I have not observed this.
Fix this by synchronizing the deadlines for both timers to the same
time source on every tick. This prevents the errors from accumulating.
Fixes: 8003c9ae20
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: David Vrabel <david.vrabel@nutanix.com>
Cc: stable@vger.kernel.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
- Close a hole which could possibly lead to the host timebase getting
out of sync.
- Three fixes relating to PTEs and TLB entries for radix guests.
- Fix a bug which could lead to an interrupt never getting delivered
to the guest, if it is pending for a guest vCPU when the vCPU gets
offlined.
-----BEGIN PGP SIGNATURE-----
iQFGBAABCgAwFiEEv0VLfXa2m9eKuaRpnZrqdyxjcZ8FAlsGTWMSHHBhdWx1c0Bv
emxhYnMub3JnAAoJEJ2a6ncsY3GfPKQH/3dopz+qjpZqvhgvqfC0wkLlGLcTxmKK
+y77M5YStFEeytYB52hyrAs4KptM1If5+BfShX4tTzGY5MGS4RMvzY7tLNzLlmFg
S/ghzlFCh4dIz+LTk58FIyFmyn7GrvJRP33FoiAPCCp1AkRL7MlSD5cu3N6fHo6P
GU5lHLLyaGEIkC4KxLQdr4smV3tKNk1k6iz4eMHwDOeLoxcLnz0LbiM7xBr/Txmu
miF68B29hU/peKM/GbtSAh5TpWY6WlcPTBUEiHXghcuYmXqgW43fjGleuL330mN4
HtSONLuapa6VNSJy3UuGBlI1puIEbUrtTPfy0UxKQG3Em7L8UnxO2wk=
=7/7b
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-fixes-4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Fixes for PPC KVM:
- Close a hole which could possibly lead to the host timebase getting
out of sync.
- Three fixes relating to PTEs and TLB entries for radix guests.
- Fix a bug which could lead to an interrupt never getting delivered
to the guest, if it is pending for a guest vCPU when the vCPU gets
offlined.
This one should be using the default LPM policy for mobile chipsets so
add the PCI ID to the driver list of supported revices.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Commit 15122ee2c5 ("arm64: Enforce BBM for huge IO/VMAP mappings")
disallowed block mappings for ioremap since that code does not honor
break-before-make. The same APIs are also used for permission updating
though and the extra checks prevent the permission updates from happening,
even though this should be permitted. This results in read-only permissions
not being fully applied. Visibly, this can occasionaly be seen as a failure
on the built in rodata test when the test data ends up in a section or
as an odd RW gap on the page table dump. Fix this by using
pgattr_change_is_safe instead of p*d_present for determining if the
change is permitted.
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Fixes: 15122ee2c5 ("arm64: Enforce BBM for huge IO/VMAP mappings")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Jun Wu at Facebook reported that an internal service was seeing a return
value of 1 from ftruncate() on Btrfs in some cases. This is coming from
the NEED_TRUNCATE_BLOCK return value from btrfs_truncate_inode_items().
btrfs_truncate() uses two variables for error handling, ret and err.
When btrfs_truncate_inode_items() returns non-zero, we set err to the
return value. However, NEED_TRUNCATE_BLOCK is not an error. Make sure we
only set err if ret is an error (i.e., negative).
To reproduce the issue: mount a filesystem with -o compress-force=zstd
and the following program will encounter return value of 1 from
ftruncate:
int main(void) {
char buf[256] = { 0 };
int ret;
int fd;
fd = open("test", O_CREAT | O_WRONLY | O_TRUNC, 0666);
if (fd == -1) {
perror("open");
return EXIT_FAILURE;
}
if (write(fd, buf, sizeof(buf)) != sizeof(buf)) {
perror("write");
close(fd);
return EXIT_FAILURE;
}
if (fsync(fd) == -1) {
perror("fsync");
close(fd);
return EXIT_FAILURE;
}
ret = ftruncate(fd, 128);
if (ret) {
printf("ftruncate() returned %d\n", ret);
close(fd);
return EXIT_FAILURE;
}
close(fd);
return EXIT_SUCCESS;
}
Fixes: ddfae63cc8 ("btrfs: move btrfs_truncate_block out of trans handle")
CC: stable@vger.kernel.org # 4.15+
Reported-by: Jun Wu <quark@fb.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When posted work request, it need to compute the length of
all sges of every wr and fill it into the msg_len field of
send wqe. Thus, While posting multiple wr,
tmp_len should be reinitialized to zero.
Fixes: 8b9b8d143b ("RDMA/hns: Fix the endian problem for hns")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When use cq record db for kernel, it needs to set the hr_cq->db_en
to 1 and configure the dma address of record cq db of qp context.
Fixes: 86188a8810 ("RDMA/hns: Support cq record doorbell for kernel space")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The err pointer comes from uverbs_attr_get, not from the uobject member,
which does not store an ERR_PTR.
Fixes: be934cca9e ("IB/uverbs: Add device memory registration ioctl support")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Each user_context receives a separate dpi value and thus a different
address on the doorbell bar. The qedr_mmap function needs to validate
the address and map the doorbell bar accordingly.
The current implementation always checked against dpi=0 doorbell range
leading to a wrong mapping for doorbell bar. (It entered an else case
that mapped the address differently). qedr_mmap should only be used
for doorbells, so the else was actually wrong in the first place.
This only has an affect on arm architecture and not an issue on a
x86 based architecture.
This lead to doorbells not occurring on arm based systems and left
applications that use more than one dpi (or several applications
run simultaneously ) to hang.
Fixes: ac1b36e55a ("qedr: Add support for user context verbs")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
spin_lock/unlock was used instead of spin_un/lock_irq
in a procedure used in process space, on a spinlock
which can be grabbed in an interrupt.
This caused the stack trace below to be displayed (on kernel
4.17.0-rc1 compiled with Lock Debugging enabled):
[ 154.661474] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[ 154.668909] 4.17.0-rc1-rdma_rc_mlx+ #3 Tainted: G I
[ 154.675856] -----------------------------------------------------
[ 154.682706] modprobe/10159 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 154.690254] 00000000f3b0e495 (&(&qp_table->lock)->rlock){+.+.}, at: mlx4_qp_remove+0x20/0x50 [mlx4_core]
[ 154.700927]
and this task is already holding:
[ 154.707461] 0000000094373b5d (&(&cq->lock)->rlock/1){....}, at: destroy_qp_common+0x111/0x560 [mlx4_ib]
[ 154.718028] which would create a new lock dependency:
[ 154.723705] (&(&cq->lock)->rlock/1){....} -> (&(&qp_table->lock)->rlock){+.+.}
[ 154.731922]
but this new dependency connects a SOFTIRQ-irq-safe lock:
[ 154.740798] (&(&cq->lock)->rlock){..-.}
[ 154.740800]
... which became SOFTIRQ-irq-safe at:
[ 154.752163] _raw_spin_lock_irqsave+0x3e/0x50
[ 154.757163] mlx4_ib_poll_cq+0x36/0x900 [mlx4_ib]
[ 154.762554] ipoib_tx_poll+0x4a/0xf0 [ib_ipoib]
...
to a SOFTIRQ-irq-unsafe lock:
[ 154.815603] (&(&qp_table->lock)->rlock){+.+.}
[ 154.815604]
... which became SOFTIRQ-irq-unsafe at:
[ 154.827718] ...
[ 154.827720] _raw_spin_lock+0x35/0x50
[ 154.833912] mlx4_qp_lookup+0x1e/0x50 [mlx4_core]
[ 154.839302] mlx4_flow_attach+0x3f/0x3d0 [mlx4_core]
Since mlx4_qp_lookup() is called only in process space, we can
simply replace the spin_un/lock calls with spin_un/lock_irq calls.
Fixes: 6dc06c08be ("net/mlx4: Fix the check in attaching steering rules")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On newer PHYs, we need to select the expansion register to write with
setting bits [11:8] to 0xf. This was done correctly by bcm7xxx.c prior
to being migrated to generic code under bcm-phy-lib.c which
unfortunately used the older implementation from the BCM54xx days.
Fix this by creating an inline stub: bcm_write_exp_sel() which adds the
correct value (MII_BCM54XX_EXP_SEL_ER) and update both the Cygnus PHY
and BCM7xxx PHY drivers which require setting these bits.
broadcom.c is unchanged because some PHYs even use a different selector
method, so let them specify it directly (e.g: SerDes secondary selector).
Fixes: a1cba5613e ("net: phy: Add Broadcom phy library for common interfaces")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are currently doing auxiliary control register reads with the shadow
register value 0b111 (0x7) which incidentally is also the selector value
that should be present in bits [2:0]. Fix this by using the appropriate
selector mask which is defined (MII_BCM54XX_AUXCTL_SHDWSEL_MASK).
This does not have a functional impact yet because we always access the
MII_BCM54XX_AUXCTL_SHDWSEL_MISC (0x7) register in the current code.
This might change at some point though.
Fixes: 5b4e290051 ("net: phy: broadcom: add bcm54xx_auxctl_read")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial fix to spelling mistake in mlx4_dbg debug message and also
change the phrasing of the message so that is is more readable
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When enabling the sub-CRQ IRQ a previous update sent a H_EOI prior
to the enablement to clear any pending interrupts that may be present
across a partition migration. This fixed a firmware bug where a
migration could erroneously indicate that a H_EOI was pending.
The H_EOI should only be sent when enabling during a mobility
event though. Doing so at other time could wrong and can produce
extra driver output when IRQs are enabled when doing TX completion.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hopefully the last fixes for 4.17. ssb is again causing problems so we
had to revert a commit and fix it better. Also a small fix to bcma and
some MAINTAINERS file updates.
ssb
* fix regression with all module PCI cards, for example using b43 and
b44 drivers
* try again fixing a MIPS linker error
bcma
* fix truncated info log messages
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbBCW1AAoJEG4XJFUm622bRIQH/R8BlzcVdvPx330v73NVuw/+
ZJ8OkSC0/j6lIVoQUcGXePP2P5bWZNZubgf+kneIOHVdGbNBdgvHC9hUMjl0Hi+V
Hweop6UfUN5lXIT/vI1TKiP4EwQhhjqboaxaq6s5ostCgi8/gc/pIDuppolNjS/M
6hI+PaQmbN/nPrzcm9GW50FAmPsI0XX77rwyIIJ40kCElChZEe23906El/BgU5pv
3dZ6vZaTxSbCNlRAVgk/W5sqak/XGYuJumdZ3vUFLKfcLTEhqytoVdvUkaDaAGA7
S1AuakMPa0J3oBcwDf8LEnHoJwPrOOqLF4CAcV9fdsI9hIDoQx+3hDMMh7yDDg4=
=VtOu
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2018-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.17
Hopefully the last fixes for 4.17. ssb is again causing problems so we
had to revert a commit and fix it better. Also a small fix to bcma and
some MAINTAINERS file updates.
ssb
* fix regression with all module PCI cards, for example using b43 and
b44 drivers
* try again fixing a MIPS linker error
bcma
* fix truncated info log messages
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When link is down, writes to the device might fail with
-EIO. Userspace needs an indication when the status is resolved. As a
fix, tun_net_open() attempts to wake up writers - but that is only
effective if SOCKWQ_ASYNC_NOSPACE has been set in the past. This is
not the case of vhost_net which only poll for EPOLLOUT after it meets
errors during sendmsg().
This patch fixes this by making sure SOCKWQ_ASYNC_NOSPACE is set when
socket is not writable or device is down to guarantee EPOLLOUT will be
raised in either tun_chr_poll() or tun_sock_write_space() after device
is up.
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Eric Dumazet <edumazet@google.com>
Fixes: 1bd4978a88 ("tun: honor IFF_UP in tun_get_user()")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang says:
====================
Fix several issues of virtio-net mergeable XDP
Please review the patches that tries to fix several issues of
virtio-net mergeable XDP.
Changes from V1:
- check against 1 before decreasing instead of resetting to 1
- typoe fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to drop refcnt to xdp_page if we see a gso packet. Otherwise
it will be leaked. Fixing this by moving the check of gso packet above
the linearizing logic. While at it, remove useless comment as well.
Cc: John Fastabend <john.fastabend@gmail.com>
Fixes: 72979a6c35 ("virtio_net: xdp, add slowpath case for non contiguous buffers")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we successfully linearize the packet, num_buf will be set to zero
which may confuse error handling path which assumes num_buf is at
least 1 and this can lead the code tries to pop the descriptor of next
buffer. Fixing this by checking num_buf against 1 before decreasing.
Fixes: 4941d472bf ("virtio-net: do not reset during XDP set")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should not go for the error path after successfully transmitting a
XDP buffer after linearizing. Since the error path may try to pop and
drop next packet and increase the drop counters. Fixing this by simply
drop the refcnt of original page and go for xmit path.
Fixes: 72979a6c35 ("virtio_net: xdp, add slowpath case for non contiguous buffers")
Cc: John Fastabend <john.fastabend@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After a linearized packet was redirected by XDP, we should not go for
the err path which will try to pop buffers for the next packet and
increase the drop counter. Fixing this by just drop the page refcnt
for the original page.
Fixes: 186b3c998c ("virtio-net: support XDP_REDIRECT")
Reported-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* hwsim radio dump wasn't working for the first radio
* mesh was updating statistics incorrectly
* a netlink message allocation was possibly too short
* wiphy name limit was still too long
* in certain cases regdb query could find a NULL pointer
-----BEGIN PGP SIGNATURE-----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=KWsp
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2018-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A handful of fixes:
* hwsim radio dump wasn't working for the first radio
* mesh was updating statistics incorrectly
* a netlink message allocation was possibly too short
* wiphy name limit was still too long
* in certain cases regdb query could find a NULL pointer
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=2BAn
-----END PGP SIGNATURE-----
Merge tag 'mfd-fixes-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fix from Lee Jones:
"A single cros_ec_spi fix correcting the handling for long-running
commands"
* tag 'mfd-fixes-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: cros_ec: Retry commands when EC is known to be busy
Pull alpha fixes from Matt Turner:
"A few small changes for alpha"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering #2
alpha: simplify get_arch_dma_ops
alpha: use dma_direct_ops for jensen
We have had problems displaying fbdev after a resume and as a
workaround we have had to call vmw_fb_refresh(). This has had
a number of unwanted side-effects. The root of the problem was,
however that the coalesced fbdev dirty region was not empty on
the first dirty_mark() after a resume, so a flush was never
scheduled.
Fix this by force scheduling an fbdev flush after resume, and
remove the workaround.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
The error paths were leaking opened channels.
Fix by using dedicated error paths.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Depending on whether the kernel is compiled with frame-pointer or not,
the temporary memory location used for the bp parameter in these macros
is referenced relative to the stack pointer or the frame pointer.
Hence we can never reference that parameter when we've modified either
the stack pointer or the frame pointer, because then the compiler would
generate an incorrect stack reference.
Fix this by pushing the temporary memory parameter on a known location on
the stack before modifying the stack- and frame pointers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
The reuseport_bpf_numa test case fails there's no numa support. The
test shouldn't fail if there's no support it should be skipped.
Fixes: 3c2c3c16aa ("reuseport, bpf: add test case for bpf_get_numa_node_id")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Only CPUs which speculate can speculate. Therefore, it seems prudent
to test for cpu_no_speculation first and only then determine whether
a specific speculating CPU is susceptible to store bypass speculation.
This is underlined by all CPUs currently listed in cpu_no_speculation
were present in cpu_no_spec_store_bypass as well.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Cc: konrad.wilk@oracle.com
Link: https://lkml.kernel.org/r/20180522090539.GA24668@light.dominikbrodowski.net
The X86_FEATURE_SSBD is an synthetic CPU feature - that is
it bit location has no relevance to the real CPUID 0x7.EBX[31]
bit position. For that we need the new CPU feature name.
Fixes: 52817587e7 ("x86/cpufeatures: Disentangle SSBD enumeration")
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20180521215449.26423-2-konrad.wilk@oracle.com
Commit 001dde9400 ("mfd: cros ec: spi: Fix "in progress" error
signaling") pointed out some bad code, but its analysis and conclusion
was not 100% correct.
It *is* correct that we should not propagate result==EC_RES_IN_PROGRESS
for transport errors, because this has a special meaning -- that we
should follow up with EC_CMD_GET_COMMS_STATUS until the EC is no longer
busy. This is definitely the wrong thing for many commands, because
among other problems, EC_CMD_GET_COMMS_STATUS doesn't actually retrieve
any RX data from the EC, so commands that expected some data back will
instead start processing junk.
For such commands, the right answer is to either propagate the error
(and return that error to the caller) or resend the original command
(*not* EC_CMD_GET_COMMS_STATUS).
Unfortunately, commit 001dde9400 forgets a crucial point: that for
some long-running operations, the EC physically cannot respond to
commands any more. For example, with EC_CMD_FLASH_ERASE, the EC may be
re-flashing its own code regions, so it can't respond to SPI interrupts.
Instead, the EC prepares us ahead of time for being busy for a "long"
time, and fills its hardware buffer with EC_SPI_PAST_END. Thus, we
expect to see several "transport" errors (or, messages filled with
EC_SPI_PAST_END). So we should really translate that to a retryable
error (-EAGAIN) and continue sending EC_CMD_GET_COMMS_STATUS until we
get a ready status.
IOW, it is actually important to treat some of these "junk" values as
retryable errors.
Together with commit 001dde9400, this resolves bugs like the
following:
1. EC_CMD_FLASH_ERASE now works again (with commit 001dde9400, we
would abort the first time we saw EC_SPI_PAST_END)
2. Before commit 001dde9400, transport errors (e.g.,
EC_SPI_RX_BAD_DATA) seen in other commands (e.g.,
EC_CMD_RTC_GET_VALUE) used to yield junk data in the RX buffer; they
will now yield -EAGAIN return values, and tools like 'hwclock' will
simply fail instead of retrieving and re-programming undefined time
values
Fixes: 001dde9400 ("mfd: cros ec: spi: Fix "in progress" error signaling")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
memory-barriers.txt has been updated with the following requirement.
"When using writel(), a prior wmb() is not needed to guarantee that the
cache coherent memory writes have completed before writing to the MMIO
region."
Current writeX() and iowriteX() implementations on alpha are not
satisfying this requirement as the barrier is after the register write.
Move mb() in writeX() and iowriteX() functions to guarantee that HW
observes memory changes before performing register operations.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matt Turner <mattst88@gmail.com>
The generic dma_direct implementation does the same thing as the alpha
pci-noop implementation, just with more bells and whistles. And unlike
the current code it at least has a theoretical chance to actually compile.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Willem de Bruijn