Commit graph

236 commits

Author SHA1 Message Date
Mike Frysinger a70ce072b3 Blackfin arch: update anomaly headers from toolchain trunk
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-31 15:47:17 +08:00
Michael Hennerich b06dcee9c8 Blackfin arch: Remove bad and usless code
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-31 15:35:40 +08:00
Javier Herrero eedd306b51 Blackfin serial driver: add extra IRQ flag for 8250 serial driver
Signed-off-by: Javier Herrero <jherrero@hvsistemas.es>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-17 18:21:57 +08:00
Bryan Wu 7e291434eb Blackfin arch: Fix bug - USB fails to build for BF524/BF526
BF524 is the same as BF525, except the speed of the processor
BF526 is the same as BF527, except the speed of the processor

Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-19 14:56:42 +08:00
Michael Hennerich 5906967638 Blackfin arch: IO Port functions to read/write unalligned memory
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-17 16:38:52 +08:00
Cliff Cai 86ad79321c Blackfin arch: enable a choice to provide 4M DMA memory
support two cascaded AD73322 cards, more uncached DMA
memory is needed, so add a choice to provide 4M DMA memory

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-17 16:36:52 +08:00
Michael Hennerich 803a8d2acb Blackfin arch: Add workaround to read edge triggered GPIOs
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-17 16:01:51 +08:00
Michael Hennerich 92322da9b5 Blackfin arch: Sync channel defines with struct dma_register dma_io_base_addr.
Otherwise we use the wrong DMA channels.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-17 15:59:11 +08:00
Al Viro 45b3947c2d [Blackfin] arch: Blackfin checksum annotations
FSVOtest in this case, since I don't have the hardware...
However, all changes seen by gcc are actually
 - explicit cast to unsigned short in return expression of functions
    returning unsigned short
 - csum_fold() return type changed from unsigned int to __sum16
   (unsigned short), same as for all other architecture and as net/* expects;
   expression actually returned is ((~(sum << 16)) >> 16) with sum being
   unsigned 32bit, so it's (a) going to fit into the range of unsigned short
   and (b) had been unsigned all along, so no sign expansion mess happened.

Tested-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Miller <davem@davemloft.net>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-12 11:55:10 +08:00
Mike Frysinger 45828b812d Blackfin Serial Driver: abstract away DLAB differences into header
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Mike Frysinger 89bf6dc51a Blackfin Serial Driver: macro away the IER differences between processors
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Michael Hennerich 56f8771302 [Blackfin] arch: remove useless IRQ_SW_INT defines
IRQ_SW_INT1 and IRQ_SW_INT2 obsolete:
Remove useless defines
Fix SYS_IRQS
Keep numbering scheme, so we don't break existing configurations.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-10 00:11:59 +08:00
Bernd Schmidt 0893f1250f [Blackfin] arch: fix gdb testing regression
When transferring to IRQ5 from an exception, save SYSCFG in memory across the
transfer and clear the trace bit.

When we get a single step exception, check whether we can safely clear the
trace bit in SYSCFG.  We can (and should) clear it after the first instruction
of the interrupt handler; the first insn saves SYSCFG to the stack in all
handlers.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Vitja Makarov 1bfb4b21c7 [Blackfin] arch: Support for CPU_FREQ and NOHZ
Singed-off-by: Vitja Makarov <vitja.makarov@gmail.com>
2008-05-07 11:41:26 +08:00
Michael Hennerich 14b03204c8 [Blackfin] arch: Functional power management support: Add CPU and platform voltage scaling support
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
Michael Hennerich c2f9527979 [Blackfin] arch: Equalize include files: Add VR_CTL masks
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-07 11:41:26 +08:00
H. Peter Anvin 5424a328d2 blackfin: types: use <asm-generic/int-*.h> for the blackfin architecture
This modifies <asm-blackfin/types.h> to use the <asm-generic/int-*.h>
generic include files.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Bryan Wu <cooloney@kernel.org>
2008-05-02 16:18:20 -07:00
Harvey Harrison 6510d41954 kernel: Move arches to use common unaligned access
Unaligned access is ok for the following arches:
cris, m68k, mn10300, powerpc, s390, x86

Arches that use the memmove implementation for native endian, and
the byteshifting for the opposite endianness.
h8300, m32r, xtensa

Packed struct for native endian, byteshifting for other endian:
alpha, blackfin, ia64, parisc, sparc, sparc64, mips, sh

m86knommu is generic_be for Coldfire, otherwise unaligned access is ok.

frv, arm chooses endianness based on compiler settings, uses the byteshifting
versions.  Remove the unaligned trap handler from frv as it is now unused.

v850 is le, uses the byteshifting versions for both be and le.

Remove the now unused asm-generic implementation.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:27 -07:00
Mike Frysinger 0c11700dbf [Blackfin] arch: add include/boot .gitignore files
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25 08:29:11 +08:00
Michael Hennerich e6c91b64dd [Blackfin] arch: Functional power management support: Add support for cpu frequency scaling
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25 04:58:29 +08:00
Michael Hennerich 8e39df215c [Blackfin] arch: Equalize include files: Add PLL_DIV Masks
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25 04:41:49 +08:00
Graf Yang 5be36d22b2 [Blackfin] arch: add Blackfin on-chip SIR IrDA driver support
- add platform device resources in board files
 - add new bfin_sir.h to each machines

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25 03:09:15 +08:00
Sonic Zhang 4d55563070 [Blackfin] arch: Update anomaly list.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25 03:28:10 +08:00
Robert P. J. Day 18628e4375 [Blackfin] arch: Clean up the definition and correct the commentary for current_thread_info().
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24 09:02:00 +08:00
Mike Frysinger 2d19123388 [Blackfin] arch: define our own BUG() so we can dump the blackfin hardware trace buffer
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24 08:58:44 +08:00
Michael Hennerich a81501af19 [Blackfin] arch: Prevent potential Core Hang situation
If the new value written to the PLL_CTL or VR_CTL register is the
same as the previous value, the PLL wake-up will occur immediately
(PLL is already locked), but the core and system clock will be
bypassed for the PLL_LOCKCNT duration. For this interval, code will
execute at the CLKIN rate instead of at the expected CCLK rate.
Software should guard against this condition by comparing the
current value to the new value before writing the new value.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24 07:32:41 +08:00
Bernd Schmidt 7795566495 [Blackfin] arch: Give the DMA base registers a more descriptive name
The DMA base registers are available in a global named "base_addr" for
every Blackfin variant. Give this a more descriptive name, and remove
duplicate tables from some drivers.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24 05:31:18 +08:00
Mike Frysinger 764cb81cdc [Blackfin] arch: actually implement get_cycles function
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24 05:07:29 +08:00
Mike Frysinger 8b6eb473c5 [Blackfin] arch: remove duplicated prototypes for internal cplb structures from the global blackfin header
remove duplicated prototypes for internal cplb structures from
the global blackfin header as nothing else should be accessing these

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24 05:09:06 +08:00
Mike Frysinger 681793711a [Blackfin] arch: declare list of peripherals as const since we dont modify the incoming array
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24 05:04:24 +08:00
Mike Frysinger 5d1617b247 [Blackfin] arch: merge ip0x-specific board changes
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24 05:03:26 +08:00
Graf Yang 6ed8394230 [Blackfin] arch: Resolve the clash issue of UART defines between blackfin headers and include/linux/serial_reg.
Signed-off-by: Graf Yang <graf.yang@analog.com>
Cc: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24 04:43:14 +08:00
Bernd Schmidt d5adb029ef [Blackfin] arch: This allows XIP to work with FD-PIC.
Previously, init failed to do anything meaningful;
it turns out that the reason is that FD-PIC has a readonly data
section which can be located in the XIP filesystem, and various address checks
in the kernel reject such addresses for syscall arguments.  Hence, init's
  execve ("/bin/sh", ...)
failed with error code EFAULT.

There's room for improvement here: in case people want to have filesystems
on flash rather than in main memory, _access_ok should be modified to
allow this.

This bug fix is also dedicated to Michael Hennerich.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24 03:06:15 +08:00
Harvey Harrison b85d858b40 [Blackfin] arch: __FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23 09:39:01 +08:00
Meihui Fan 6b13483ba2 [Blackfin] arch: remove unused/incorrect definition
Signed-off-by: Meihui Fan <mhfan@hhcn.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23 09:07:25 +08:00
Meihui Fan 6eceb0d4da [Blackfin] arch: add support for the rest of the gptimers on the BF54x
Signed-off-by: Meihui Fan <mhfan@hhcn.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23 08:53:15 +08:00
Meihui Fan a8a46a269e [Blackfin] arch: fix obvious bfin_write typos
Signed-off-by: Meihui Fan <mhfan@hhcn.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23 08:50:53 +08:00
Sonic Zhang 37167e6411 [Blackfin] arch: Fix bug - Properly calculate DDR clock.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25 03:06:10 +08:00
Mike Frysinger 25bb23bfd0 [Blackfin] arch: fix some obvious typos -- some of which prevent SDH building for the BF542
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23 08:27:06 +08:00
Mike Frysinger 0e184c6b4f [Blackfin] arch: relocate MAX_SWITCH_{D,I}_CPLBS from the header to the file where it actually gets used.
relocate MAX_SWITCH_{D,I}_CPLBS from the header to the file
where it actually gets used.  this way when we change
CONFIG_MEM_SIZE in our kconfig, we only rebuild one or two files
rather than a whole bunch that implicitly include cplb.h.

this will also remove the ability to clear the swapcount on
the fly, but i really dont think that functionality is important.

ultimate goal is for CONFIG_MEM_SIZE to go away and calculate
this value on the fly based on what u-boot programmed for us.

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23 08:23:51 +08:00
Mike Frysinger 53eabf046b [Blackfin] arch: replace implied numbers with real values
replace implied numbers with real values so that strace is able to
calculate things automatically ... the numbers are frozen in our ABI,
so having them based off other __NR_xxx values really doesnt matter
-- no functional changes

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23 08:09:45 +08:00
Bryan Wu 9fcdc78c5e [Blackfin] arch: Add dma_map_page and dma_unmap_page stub for MMC SPI compiling
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23 07:41:52 +08:00
Bernd Schmidt 2a0c4fdb66 [Blackfin] arch: fix bug - when using trace buffer with CONFIG_MPU enabled.
There were a couple of problems with the way the trace buffer state
is saved/restored in assembly.  The DEBUG_HWTRACE_SAVE/RESTORE macros
save a value to the stack, which is not immediately obvious; the CPLB
exception code needed changes to load the correct value of the stack
pointer.  The other problem is that the SAVE/RESTORE macros weren't
pushing and popping the value downwards on the stack, but rather moving
it _upwards_, which is of course completely broken.

We also need to make sure there's a matching DEBUG_HWTRACE_RESTORE in
the error case of the CPLB handler.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23 07:17:34 +08:00
Bryan Wu b594272c5e [Blackfin] arch: remove TWI I2C register accessing helper macros, because we moved to use i2c new-style interface
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-27 07:25:21 +08:00
Mike Frysinger 0ddeeca25c [Blackfin] arch: add missing __user marking to ss_sp member of signalstack and a few userspace system functions
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-07 02:37:41 +08:00
Matthew Wilcox 5a6483feb0 include: Remove unnecessary inclusions of asm/semaphore.h
None of these files use any of the functionality promised by
asm/semaphore.h.  It's possible that they (or some user of them) rely
on it dragging in some unrelated header file, but I can't build all
these files, so we'll have to fix any build failures as they come up.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18 22:16:54 -04:00
Linus Torvalds 188da98800 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (58 commits)
  ide: remove ide_init_default_irq() macro
  ide: move default IDE ports setup to ide_generic host driver
  ide: remove obsoleted "idex=noprobe" kernel parameter (take 2)
  ide: remove needless hwif->irq check from ide_hwif_configure()
  ide: init hwif->{io_ports,irq} explicitly in legacy VLB host drivers
  ide: limit legacy VLB host drivers to alpha, x86 and mips
  cmd640: init hwif->{io_ports,irq} explicitly
  cmd640: cleanup setup_device_ptrs()
  ide: add ide-4drives host driver (take 3)
  ide: remove ppc ifdef from init_ide_data()
  ide: remove ide_default_io_ctl() macro
  ide: remove CONFIG_IDE_ARCH_OBSOLETE_INIT
  ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS (take 2)
  ppc/pmac: remove no longer needed IDE quirk
  ppc: don't include <linux/ide.h>
  ppc: remove ppc_ide_md
  ppc/pplus: remove ppc_ide_md.ide_init_hwif hook
  ppc/sandpoint: remove ppc_ide_md hooks
  ppc/lopec: remove ppc_ide_md hooks
  ppc/mpc8xx: remove ppc_ide_md hooks
  ...
2008-04-18 08:39:24 -07:00
Bartlomiej Zolnierkiewicz 9dfcd15a6d ide: remove ide_default_io_ctl() macro
It is always == '((base) + 0x206)' if CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS=y
and it is not needed otherwise (arm, blackfin, parisc, ppc64, sh, sparc[64]).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 00:46:34 +02:00
Matthew Wilcox 64ac24e738 Generic semaphore implementation
Semaphores are no longer performance-critical, so a generic C
implementation is better for maintainability, debuggability and
extensibility.  Thanks to Peter Zijlstra for fixing the lockdep
warning.  Thanks to Harvey Harrison for pointing out that the
unlikely() was unnecessary.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 10:42:34 -04:00
Christian Borntraeger dd135ebbd2 kvm: provide kvm.h for all architecture: fixes headers_install
Currently include/linux/kvm.h is not considered by make headers_install,
because Kbuild cannot handle " unifdef-$(CONFIG_FOO) += foo.h.  This problem
was introduced by

commit fb56dbb31c
Author: Avi Kivity <avi@qumranet.com>
Date:   Sun Dec 2 10:50:06 2007 +0200

    KVM: Export include/linux/kvm.h only if $ARCH actually supports KVM

    Currently, make headers_check barfs due to <asm/kvm.h>, which <linux/kvm.h>
    includes, not existing.  Rather than add a zillion <asm/kvm.h>s, export kvm.
    only if the arch actually supports it.

    Signed-off-by: Avi Kivity <avi@qumranet.com>

which makes this an 2.6.25 regression.

One way of solving the issue is to enhance Kbuild, but Avi and David conviced
me, that changing headers_install is not the way to go.  This patch changes
the definition for linux/kvm.h to unifdef-y.

If  unifdef-y is used for linux/kvm.h "make headers_check" will fail on all
architectures without asm/kvm.h.  Therefore, this patch also provides
asm/kvm.h on all architectures.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Avi Kivity <avi@qumranet.com>
Cc: Sam Ravnborg <sam@ravnborg.org
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-02 15:28:18 -07:00