dd slept infinitely when fsfeeze failed because of EIO.
To fix this problem, if ->freeze_fs fails, freeze_super() wakes up
the tasks waiting for the filesystem to become unfrozen.
When s_frozen isn't SB_UNFROZEN in __generic_file_aio_write(),
the function sleeps until FITHAW ioctl wakes up s_wait_unfrozen.
However, if ->freeze_fs fails, s_frozen is set to SB_UNFROZEN and then
freeze_super() returns an error number. In this case, FITHAW ioctl returns
EINVAL because s_frozen is already SB_UNFROZEN. There is no way to wake up
s_wait_unfrozen, so __generic_file_aio_write() sleeps infinitely.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If there are any inodes on the super block that have been unlinked
(i_nlink == 0) but have not yet been deleted then prevent the
remounting the super block read-only.
Reported-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently remouting superblock read-only is racy in a major way.
With the per mount read-only infrastructure it is now possible to
prevent most races, which this patch attempts.
Before starting the remount read-only, iterate through all mounts
belonging to the superblock and if none of them have any pending
writes, set sb->s_readonly_remount. This indicates that remount is in
progress and no further write requests are allowed. If the remount
succeeds set MS_RDONLY and reset s_readonly_remount.
If the remounting is unsuccessful just reset s_readonly_remount.
This can result in transient EROFS errors, despite the fact the
remount failed. Unfortunately hodling off writes is difficult as
remount itself may touch the filesystem (e.g. through load_nls())
which would deadlock.
A later patch deals with delayed writes due to nlink going to zero.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Keep track of vfsmounts belonging to a superblock. List is protected
by vfsmount_lock.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
unfortunately, just checking MS_BORN after having grabbed ->s_umount in
sget() is not enough; places that pick superblock from a list and
grab s_umount shared need the same check in addition to checking for
->s_root; otherwise three-way race between failing mount, sget() and
such list-walker can leave us with list-walker coming *second*, when
temporary active ref grabbed by sget() (to be dropped when sget()
notices that original mount has failed by checking MS_BORN) has
lead to deactivate_locked_super() from failing ->mount() *not* doing
->kill_sb() and just releasing ->s_umount. Once sget() gets through
and notices that MS_BORN had never been set it will drop the active
ref and fs will be shut down and kicked out of all lists, but it's
too late for something like sync_supers().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
some stuff in there can actually become static; some belongs to pnode.h
as it's a private interface between namespace.c and pnode.c...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
On emergency remount we want to force MS_RDONLY on the super block
even if ->remount_fs() failed for some reason.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The callback must not return -1 when nr_to_scan is zero. Fix the bug in
fs/super.c and add this requirement to the callback specification.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-3.1/core' of git://git.kernel.dk/linux-block: (24 commits)
block: strict rq_affinity
backing-dev: use synchronize_rcu_expedited instead of synchronize_rcu
block: fix patch import error in max_discard_sectors check
block: reorder request_queue to remove 64 bit alignment padding
CFQ: add think time check for group
CFQ: add think time check for service tree
CFQ: move think time check variables to a separate struct
fixlet: Remove fs_excl from struct task.
cfq: Remove special treatment for metadata rqs.
block: document blk_plug list access
block: avoid building too big plug list
compat_ioctl: fix make headers_check regression
block: eliminate potential for infinite loop in blkdev_issue_discard
compat_ioctl: fix warning caused by qemu
block: flush MEDIA_CHANGE from drivers on close(2)
blk-throttle: Make total_nr_queued unsigned
block: Add __attribute__((format(printf...) and fix fallout
fs/partitions/check.c: make local symbols static
block:remove some spare spaces in genhd.c
block:fix the comment error in blkdev.h
...
Now that the per-sb shrinker is responsible for shrinking 2 or more
caches, increase the batch size to keep econmies of scale for
shrinking each cache. Increase the shrinker batch size to 1024
objects.
To allow for a large increase in batch size, add a conditional
reschedule to prune_icache_sb() so that we don't hold the LRU spin
lock for too long. This mirrors the behaviour of the
__shrink_dcache_sb(), and allows us to increase the batch size
without needing to worry about problems caused by long lock hold
times.
To ensure that filesystems using the per-sb shrinker callouts don't
cause problems, document that the object freeing method must
reschedule appropriately inside loops.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now we have a per-superblock shrinker implementation, we can add a
filesystem specific callout to it to allow filesystem internal
caches to be shrunk by the superblock shrinker.
Rather than perpetuate the multipurpose shrinker callback API (i.e.
nr_to_scan == 0 meaning "tell me how many objects freeable in the
cache), two operations will be added. The first will return the
number of objects that are freeable, the second is the actual
shrinker call.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
With context based shrinkers, we can implement a per-superblock
shrinker that shrinks the caches attached to the superblock. We
currently have global shrinkers for the inode and dentry caches that
split up into per-superblock operations via a coarse proportioning
method that does not batch very well. The global shrinkers also
have a dependency - dentries pin inodes - so we have to be very
careful about how we register the global shrinkers so that the
implicit call order is always correct.
With a per-sb shrinker callout, we can encode this dependency
directly into the per-sb shrinker, hence avoiding the need for
strictly ordering shrinker registrations. We also have no need for
any proportioning code for the shrinker subsystem already provides
this functionality across all shrinkers. Allowing the shrinker to
operate on a single superblock at a time means that we do less
superblock list traversals and locking and reclaim should batch more
effectively. This should result in less CPU overhead for reclaim and
potentially faster reclaim of items from each filesystem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The per-sb shrinker has the same requirement as the writeback
threads of ensuring that the superblock is usable and pinned for the
time it takes to run the work. Both need to take a passive reference
to the sb, take a read lock on the s_umount lock and then only
continue if an unmount is not in progress.
pin_sb_for_writeback() does this exactly, so move it to fs/super.c
and rename it to grab_super_passive() and exporting it via
fs/internal.h for all the VFS code to be able to use.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
With the inode LRUs moving to per-sb structures, there is no longer
a need for a global inode_lru_lock. The locking can be made more
fine-grained by moving to a per-sb LRU lock, isolating the LRU
operations of different filesytsems completely from each other.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The inode unused list is currently a global LRU. This does not match
the other global filesystem cache - the dentry cache - which uses
per-superblock LRU lists. Hence we have related filesystem object
types using different LRU reclaimation schemes.
To enable a per-superblock filesystem cache shrinker, both of these
caches need to have per-sb unused object LRU lists. Hence this patch
converts the global inode LRU to per-sb LRUs.
The patch only does rudimentary per-sb propotioning in the shrinker
infrastructure, as this gets removed when the per-sb shrinker
callouts are introduced later on.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Call the given function for all superblocks of given type. Function
gets a superblock (with s_umount locked shared) and (void *) argument
supplied by caller of iterator.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fs_excl is a poor man's priority inheritance for filesystems to hint to
the block layer that an operation is important. It was never clearly
specified, not widely adopted, and will not prevent starvation in many
cases (like across cgroups).
fs_excl was introduced with the time sliced CFQ IO scheduler, to
indicate when a process held FS exclusive resources and thus needed
a boost.
It doesn't cover all file systems, and it was never fully complete.
Lets kill it.
Signed-off-by: Justin TerAvest <teravest@google.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Caching "we have already removed suid/caps" was overenthusiastic as merged.
On network filesystems we might have had suid/caps set on another client,
silently picked by this client on revalidate, all of that *without* clearing
the S_NOSEC flag.
AFAICS, the only reasonably sane way to deal with that is
* new superblock flag; unless set, S_NOSEC is not going to be set.
* local block filesystems set it in their ->mount() (more accurately,
mount_bdev() does, so does btrfs ->mount(), users of mount_bdev() other than
local block ones clear it)
* if any network filesystem (or a cluster one) wants to use S_NOSEC,
it'll need to set MS_NOSEC in sb->s_flags *AND* take care to clear S_NOSEC when
inode attribute changes are picked from other clients.
It's not an earth-shattering hole (anybody that can set suid on another client
will almost certainly be able to write to the file before doing that anyway),
but it's a bug that needs fixing.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem:
xen: cleancache shim to Xen Transcendent Memory
ocfs2: add cleancache support
ext4: add cleancache support
btrfs: add cleancache support
ext3: add cleancache support
mm/fs: add hooks to support cleancache
mm: cleancache core ops functions and config
fs: add field to superblock to support cleancache
mm/fs: cleancache documentation
Fix up trivial conflict in fs/btrfs/extent_io.c due to includes
This fourth patch of eight in this cleancache series provides the
core hooks in VFS for: initializing cleancache per filesystem;
capturing clean pages reclaimed by page cache; attempting to get
pages from cleancache before filesystem read; and ensuring coherency
between pagecache, disk, and cleancache. Note that the placement
of these hooks was stable from 2.6.18 to 2.6.38; a minor semantic
change was required due to a patchset in 2.6.39.
All hooks become no-ops if CONFIG_CLEANCACHE is unset, or become
a check of a boolean global if CONFIG_CLEANCACHE is set but no
cleancache "backend" has claimed cleancache_ops.
Details and a FAQ can be found in Documentation/vm/cleancache.txt
[v8: minchan.kim@gmail.com: adapt to new remove_from_page_cache function]
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik Van Riel <riel@redhat.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>
I originally intended to remove this warning in 2.6.34, but it's not in
a high performance codepath and might help us to catch bugs later. Let's
keep it, but fix the comment to allay confusion about its removal.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...
Fix up conflicts in fs/{aio.c,super.c}
new function: mount_fs(). Does all work done by vfs_kern_mount()
except the allocation and filling of vfsmount; returns root dentry
or ERR_PTR().
vfs_kern_mount() switched to using it and taken to fs/namespace.c,
along with its wrappers.
alloc_vfsmnt()/free_vfsmnt() made static.
functions in namespace.c slightly reordered.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We don't have proper reference counting for this yet, so we run into
cases where the device is pulled and we OOPS on flushing the fs data.
This happens even though the dirty inodes have already been
migrated to the default_backing_dev_info.
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
In commit fa0d7e3de6 ("fs: icache RCU free inodes"), we use rcu free
inode instead of freeing the inode directly. It causes a crash when we
rmmod immediately after we umount the volume[1].
So we need to call rcu_barrier after we kill_sb so that the inode is
freed before we do rmmod. The idea is inspired by Aneesh Kumar.
rcu_barrier will wait for all callbacks to end before preceding. The
original patch was done by Tao Ma, but synchronize_rcu() is not enough
here.
1. http://marc.info/?l=linux-fsdevel&m=129680863330185&w=2
Tested-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of splitting refcount between (per-cpu) mnt_count
and (SMP-only) mnt_longrefs, make all references contribute
to mnt_count again and keep track of how many are longterm
ones.
Accounting rules for longterm count:
* 1 for each fs_struct.root.mnt
* 1 for each fs_struct.pwd.mnt
* 1 for having non-NULL ->mnt_ns
* decrement to 0 happens only under vfsmount lock exclusive
That allows nice common case for mntput() - since we can't drop the
final reference until after mnt_longterm has reached 0 due to the rules
above, mntput() can grab vfsmount lock shared and check mnt_longterm.
If it turns out to be non-zero (which is the common case), we know
that this is not the final mntput() and can just blindly decrement
percpu mnt_count. Otherwise we grab vfsmount lock exclusive and
do usual decrement-and-check of percpu mnt_count.
For fs_struct.c we have mnt_make_longterm() and mnt_make_shortterm();
namespace.c uses the latter in places where we don't already hold
vfsmount lock exclusive and opencodes a few remaining spots where
we need to manipulate mnt_longterm.
Note that we mostly revert the code outside of fs/namespace.c back
to what we used to have; in particular, normal code doesn't need
to care about two kinds of references, etc. And we get to keep
the optimization Nick's variant had bought us...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
block: ensure that completion error gets properly traced
blktrace: add missing probe argument to block_bio_complete
block cfq: don't use atomic_t for cfq_group
block cfq: don't use atomic_t for cfq_queue
block: trace event block fix unassigned field
block: add internal hd part table references
block: fix accounting bug on cross partition merges
kref: add kref_test_and_get
bio-integrity: mark kintegrityd_wq highpri and CPU intensive
block: make kblockd_workqueue smarter
Revert "sd: implement sd_check_events()"
block: Clean up exit_io_context() source code.
Fix compile warnings due to missing removal of a 'ret' variable
fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
cfq-iosched: don't check cfqg in choose_service_tree()
fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
cdrom: export cdrom_check_events()
sd: implement sd_check_events()
sr: implement sr_check_events()
...
The problem that this patch aims to fix is vfsmount refcounting scalability.
We need to take a reference on the vfsmount for every successful path lookup,
which often go to the same mount point.
The fundamental difficulty is that a "simple" reference count can never be made
scalable, because any time a reference is dropped, we must check whether that
was the last reference. To do that requires communication with all other CPUs
that may have taken a reference count.
We can make refcounts more scalable in a couple of ways, involving keeping
distributed counters, and checking for the global-zero condition less
frequently.
- check the global sum once every interval (this will delay zero detection
for some interval, so it's probably a showstopper for vfsmounts).
- keep a local count and only taking the global sum when local reaches 0 (this
is difficult for vfsmounts, because we can't hold preempt off for the life of
a reference, so a counter would need to be per-thread or tied strongly to a
particular CPU which requires more locking).
- keep a local difference of increments and decrements, which allows us to sum
the total difference and hence find the refcount when summing all CPUs. Then,
keep a single integer "long" refcount for slow and long lasting references,
and only take the global sum of local counters when the long refcount is 0.
This last scheme is what I implemented here. Attached mounts and process root
and working directory references are "long" references, and everything else is
a short reference.
This allows scalable vfsmount references during path walking over mounted
subtrees and unattached (lazy umounted) mounts with processes still running
in them.
This results in one fewer atomic op in the fastpath: mntget is now just a
per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock
and non-atomic decrement in the common case. However code is otherwise bigger
and heavier, so single threaded performance is basically a wash.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
After recent blkdev_get() modifications, open_by_devnum() and
open_bdev_exclusive() are simple wrappers around blkdev_get().
Replace them with blkdev_get_by_dev() and blkdev_get_by_path().
blkdev_get_by_dev() is identical to open_by_devnum().
blkdev_get_by_path() is slightly different in that it doesn't
automatically add %FMODE_EXCL to @mode.
All users are converted. Most conversions are mechanical and don't
introduce any behavior difference. There are several exceptions.
* btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no
reason to OR it explicitly on blkdev_put().
* gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in
sb->s_mode.
* With the above changes, sb->s_mode now always should contain
FMODE_EXCL. WARN_ON_ONCE() added to kill_block_super() to detect
errors.
The new blkdev_get_*() functions are with proper docbook comments.
While at it, add function description to blkdev_get() too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Joern Engel <joern@lazybastard.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: reiserfs-devel@vger.kernel.org
Cc: xfs-masters@oss.sgi.com
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Over time, block layer has accumulated a set of APIs dealing with bdev
open, close, claim and release.
* blkdev_get/put() are the primary open and close functions.
* bd_claim/release() deal with exclusive open.
* open/close_bdev_exclusive() are combination of open and claim and
the other way around, respectively.
* bd_link/unlink_disk_holder() to create and remove holder/slave
symlinks.
* open_by_devnum() wraps bdget() + blkdev_get().
The interface is a bit confusing and the decoupling of open and claim
makes it impossible to properly guarantee exclusive access as
in-kernel open + claim sequence can disturb the existing exclusive
open even before the block layer knows the current open if for another
exclusive access. Reorganize the interface such that,
* blkdev_get() is extended to include exclusive access management.
@holder argument is added and, if is @FMODE_EXCL specified, it will
gain exclusive access atomically w.r.t. other exclusive accesses.
* blkdev_put() is similarly extended. It now takes @mode argument and
if @FMODE_EXCL is set, it releases an exclusive access. Also, when
the last exclusive claim is released, the holder/slave symlinks are
removed automatically.
* bd_claim/release() and close_bdev_exclusive() are no longer
necessary and either made static or removed.
* bd_link_disk_holder() remains the same but bd_unlink_disk_holder()
is no longer necessary and removed.
* open_bdev_exclusive() becomes a simple wrapper around lookup_bdev()
and blkdev_get(). It also has an unexpected extra bdev_read_only()
test which probably should be moved into blkdev_get().
* open_by_devnum() is modified to take @holder argument and pass it to
blkdev_get().
Most of bdev open/close operations are unified into blkdev_get/put()
and most exclusive accesses are tested atomically at the open time (as
it should). This cleans up code and removes some, both valid and
invalid, but unnecessary all the same, corner cases.
open_bdev_exclusive() and open_by_devnum() can use further cleanup -
rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop
special features. Well, let's leave them for another day.
Most conversions are straight-forward. drbd conversion is a bit more
involved as there was some reordering, but the logic should stay the
same.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Brown <neilb@suse.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: dm-devel@redhat.com
Cc: drbd-dev@lists.linbit.com
Cc: Leo Chen <leochen@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Joern Engel <joern@logfs.org>
Cc: reiserfs-devel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
eventual replacement for ->get_sb() - does *not* get vfsmount,
return ERR_PTR(error) or root of subtree to be mounted.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull removal of fsnotify marks into generic_shutdown_super().
Split umount-time work into a new function - evict_inodes().
Make sure that invalidate_inodes() will be able to cope with
I_FREEING once we change locking in iput().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
fs: scale files_lock
Improve scalability of files_lock by adding per-cpu, per-sb files lists,
protected with an lglock. The lglock provides fast access to the per-cpu lists
to add and remove files. It also provides a snapshot of all the per-cpu lists
(although this is very slow).
One difficulty with this approach is that a file can be removed from the list
by another CPU. We must track which per-cpu list the file is on with a new
variale in the file struct (packed into a hole on 64-bit archs). Scalability
could suffer if files are frequently removed from different cpu's list.
However loads with frequent removal of files imply short interval between
adding and removing the files, and the scheduler attempts to avoid moving
processes too far away. Also, even in the case of cross-CPU removal, the
hardware has much more opportunity to parallelise cacheline transfers with N
cachelines than with 1.
A worst-case test of 1 CPU allocating files subsequently being freed by N CPUs
degenerates to contending on a single lock, which is no worse than before. When
more than one CPU are allocating files, even if they are always freed by
different CPUs, there will be more parallelism than the single-lock case.
Testing results:
On a 2 socket, 8 core opteron, I measure the number of times the lock is taken
to remove the file, the number of times it is removed by the same CPU that
added it, and the number of times it is removed by the same node that added it.
Booting: locks= 25049 cpu-hits= 23174 (92.5%) node-hits= 23945 (95.6%)
kbuild -j16 locks=2281913 cpu-hits=2208126 (96.8%) node-hits=2252674 (98.7%)
dbench 64 locks=4306582 cpu-hits=4287247 (99.6%) node-hits=4299527 (99.8%)
So a file is removed from the same CPU it was added by over 90% of the time.
It remains within the same node 95% of the time.
Tim Chen ran some numbers for a 64 thread Nehalem system performing a compile.
throughput
2.6.34-rc2 24.5
+patch 24.9
us sys idle IO wait (in %)
2.6.34-rc2 51.25 28.25 17.25 3.25
+patch 53.75 18.5 19 8.75
So significantly less CPU time spent in kernel code, higher idle time and
slightly higher throughput.
Single threaded performance difference was within the noise of microbenchmarks.
That is not to say penalty does not exist, the code is larger and more memory
accesses required so it will be slightly slower.
Cc: linux-kernel@vger.kernel.org
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If sget() finds a matching superblock being set up, it'll
grab an active reference to it and grab s_umount. That's
fine - we'll wait for completion of foofs_get_sb() that way.
However, if said foofs_get_sb() fails we'll end up holding
the halfway-created superblock. deactivate_locked_super()
called by foofs_get_sb() will just unlock the sucker since
we are holding another active reference to it.
What we need is a way to tell if superblock has been successfully
set up. Unfortunately, neither ->s_root nor the check for
MS_ACTIVE quite fit. Cheap and easy way, suitable for backport:
new flag set by the (only) caller of ->get_sb(). If that flag
isn't present by the time sget() grabbed s_umount on preexisting
superblock it has found, it's seeing a stillborn and should
just bury it with deactivate_locked_super() (and repeat the search).
Longer term we want to set that flag in ->get_sb() instances (and
check for it to distinguish between "sget() found us a live sb"
and "sget() has allocated an sb, we need to set it up" in there,
instead of checking ->s_root as we do now).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Fix an obscure AB-BA deadlock in get_sb_bdev().
When a superblock is mounted more than once get_sb_bdev() calls
close_bdev_exclusive() to drop the extra bdev reference while holding
s_umount. However, sb->s_umount nests inside bd_mutex during
__invalidate_device() and close_bdev_exclusive() acquires bd_mutex during
blkdev_put(); thus creating an AB-BA deadlock.
This condition doesn't trigger frequently. For this condition to be
visible to lockdep, the filesystem must occupy the whole device (as
__invalidate_device() only grabs bd_mutex for the whole device), the FS
must be mounted more than once and partition rescan should be issued while
the FS is still mounted.
Fix it by dropping s_umount over close_bdev_exclusive().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ciprian Docan <docan@eden.rutgers.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
list_for_each_entry_safe is not suitable to protect against concurrent
modification of the list. 6754af6 introduced a race in sb walking.
list_for_each_entry can use the trick of pinning the current entry in
the list before we drop and retake the lock because it subsequently
follows cur->next. However list_for_each_entry_safe saves n=cur->next
for following before entering the loop body, so when the lock is
dropped, n may be deleted.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Frank Mayhar <fmayhar@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
quota: Convert quota statistics to generic percpu_counter
ext3 uses rb_node = NULL; to zero rb_root.
quota: Fixup dquot_transfer
reiserfs: Fix resuming of quotas on remount read-write
pohmelfs: Remove dead quota code
ufs: Remove dead quota code
udf: Remove dead quota code
quota: rename default quotactl methods to dquot_
quota: explicitly set ->dq_op and ->s_qcop
quota: drop remount argument to ->quota_on and ->quota_off
quota: move unmount handling into the filesystem
quota: kill the vfs_dq_off and vfs_dq_quota_on_remount wrappers
quota: move remount handling into the filesystem
ocfs2: Fix use after free on remount read-only
Fix up conflicts in fs/ext4/super.c and fs/ufs/file.c
Fix fs/super.c kernel-doc warning and function notation:
Warning(fs/super.c:957): No description found for parameter 'sb'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Only set the quota operation vectors if the filesystem actually supports
quota instead of doing it for all filesystems in alloc_super().
[Jan Kara: Export dquot_operations and vfs_quotactl_ops]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently the VFS calls into the quotactl interface for unmounting
filesystems. This means filesystems with their own quota handling
can't easily distinguish between user-space originating quotaoff
and an unount. Instead move the responsibily of the unmount handling
into the filesystem to be consistent with all other dquot handling.
Note that we do call dquot_disable a lot later now, e.g. after
a sync_filesystem. But this is fine as the quota code does all its
writes via blockdev's mapping and that is synced even later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently do_remount_sb calls into the dquot code to tell it about going
from rw to ro and ro to rw. Move this code into the filesystem to
not depend on the dquot code in the VFS - note ocfs2 already ignores
these calls and handles remount by itself. This gets rid of overloading
the quotactl calls and allows to unify the VFS and XFS codepaths in
that area later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
> =============================================
> [ INFO: possible recursive locking detected ]
> 2.6.31-2-generic #14~rbd3
> ---------------------------------------------
> firefox-3.5/4162 is trying to acquire lock:
> (&s->s_vfs_rename_mutex){+.+.+.}, at: [<ffffffff81139d31>] lock_rename+0x41/0xf0
>
> but task is already holding lock:
> (&s->s_vfs_rename_mutex){+.+.+.}, at: [<ffffffff81139d31>] lock_rename+0x41/0xf0
>
> other info that might help us debug this:
> 3 locks held by firefox-3.5/4162:
> #0: (&s->s_vfs_rename_mutex){+.+.+.}, at: [<ffffffff81139d31>] lock_rename+0x41/0xf0
> #1: (&sb->s_type->i_mutex_key#11/1){+.+.+.}, at: [<ffffffff81139d5a>] lock_rename+0x6a/0xf0
> #2: (&sb->s_type->i_mutex_key#11/2){+.+.+.}, at: [<ffffffff81139d6f>] lock_rename+0x7f/0xf0
>
> stack backtrace:
> Pid: 4162, comm: firefox-3.5 Tainted: G C 2.6.31-2-generic #14~rbd3
> Call Trace:
> [<ffffffff8108ae74>] print_deadlock_bug+0xf4/0x100
> [<ffffffff8108ce26>] validate_chain+0x4c6/0x750
> [<ffffffff8108d2e7>] __lock_acquire+0x237/0x430
> [<ffffffff8108d585>] lock_acquire+0xa5/0x150
> [<ffffffff81139d31>] ? lock_rename+0x41/0xf0
> [<ffffffff815526ad>] __mutex_lock_common+0x4d/0x3d0
> [<ffffffff81139d31>] ? lock_rename+0x41/0xf0
> [<ffffffff81139d31>] ? lock_rename+0x41/0xf0
> [<ffffffff8120eaf9>] ? ecryptfs_rename+0x99/0x170
> [<ffffffff81552b36>] mutex_lock_nested+0x46/0x60
> [<ffffffff81139d31>] lock_rename+0x41/0xf0
> [<ffffffff8120eb2a>] ecryptfs_rename+0xca/0x170
> [<ffffffff81139a9e>] vfs_rename_dir+0x13e/0x160
> [<ffffffff8113ac7e>] vfs_rename+0xee/0x290
> [<ffffffff8113c212>] ? __lookup_hash+0x102/0x160
> [<ffffffff8113d512>] sys_renameat+0x252/0x280
> [<ffffffff81133eb4>] ? cp_new_stat+0xe4/0x100
> [<ffffffff8101316a>] ? sysret_check+0x2e/0x69
> [<ffffffff8108c34d>] ? trace_hardirqs_on_caller+0x14d/0x190
> [<ffffffff8113d55b>] sys_rename+0x1b/0x20
> [<ffffffff81013132>] system_call_fastpath+0x16/0x1b
The trace above is totally reproducible by doing a cross-directory
rename on an ecryptfs directory.
The issue seems to be that sys_renameat() does lock_rename() then calls
into the filesystem; if the filesystem is ecryptfs, then
ecryptfs_rename() again does lock_rename() on the lower filesystem, and
lockdep can't tell that the two s_vfs_rename_mutexes are different. It
seems an annotation like the following is sufficient to fix this (it
does get rid of the lockdep trace in my simple tests); however I would
like to make sure I'm not misunderstanding the locking, hence the CC
list...
Signed-off-by: Roland Dreier <rdreier@cisco.com>
Cc: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: Dustin Kirkland <kirkland@canonical.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently the way we do freezing is by passing sb>s_bdev to freeze_bdev and then
letting it do all the work. But freezing is more of an fs thing, and doesn't
really have much to do with the bdev at all, all the work gets done with the
super. In btrfs we do not populate s_bdev, since we can have multiple bdev's
for one fs and setting s_bdev makes removing devices from a pool kind of tricky.
This means that freezing a btrfs filesystem fails, which causes us to corrupt
with things like tux-on-ice which use the fsfreeze mechanism. So instead of
populating sb->s_bdev with a random bdev in our pool, I've broken the actual fs
freezing stuff into freeze_super and thaw_super. These just take the
super_block that we're freezing and does the appropriate work. It's basically
just copy and pasted from freeze_bdev. I've then converted freeze_bdev over to
use the new super helpers. I've tested this with ext4 and btrfs and verified
everything continues to work the same as before.
The only new gotcha is multiple calls to the fsfreeze ioctl will return EBUSY if
the fs is already frozen. I thought this was a better solution than adding a
freeze counter to the super_block, but if everybody hates this idea I'm open to
suggestions. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
need list_for_each_entry_safe() here. Original didn't even
have restart logics, so if you race with umount() it blew up.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
At the same time we can kill s_need_restart and local mutex in there.
__put_super() made public for a while; will be gone later.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We used to remove from s_list and s_instances at the same
time. So let's *not* do the former and skip superblocks
that have empty s_instances in the loops over s_list.
The next step, of course, will be to get rid of rescan logics
in those loops.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make sure that s_umount is acquired *before* we drop the final
active reference; we still have the fast path (atomic_dec_unless)
and we have gotten rid of the window between the moment when
s_active hits zero and s_umount is acquired. Which simplifies
the living hell out of grab_super() and inotify pin_to_kill()
stuff.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When CONFIG_BLOCK is set, it ends up getting backing-dev.h included.
But for !CONFIG_BLOCK, it isn't so lucky. The proper thing to do is
include <linux/backing-dev.h> directly from the file it's used from,
so do that.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
noop_backing_dev_info is used only as a flag to mark filesystems that
don't have any backing store, like tmpfs, procfs, spufs, etc.
Signed-off-by: Joern Engel <joern@logfs.org>
Changed the BUG_ON() to a WARN_ON(). Note that adding dirty inodes
to the noop_backing_dev_info is not legal and will not result in
them being flushed, but we already catch this condition in
__mark_inode_dirty() when checking for a registered bdi.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Invalidate sb->s_bdev on remount,ro.
Fixes a problem reported by Jorge Boncompte who is seeing corruption
trying to snapshot a minix filesystem image. Some filesystems modify
their metadata via a path other than the bdev buffer cache (eg. they may
use a private linear mapping for their metadata, or implement directories
in pagecache, etc). Also, file data modifications usually go to the bdev
via their own mappings.
These updates are not coherent with buffercache IO (eg. via /dev/bdev)
and never have been. However there could be a reasonable expectation that
after a mount -oremount,ro operation then the buffercache should
subsequently be coherent with previous filesystem modifications.
So invalidate the bdev mappings on a remount,ro operation to provide a
coherency point.
The problem was exposed when we switched the old rd to brd because old rd
didn't really function like a normal block device and updates to rd via
mappings other than the buffercache would still end up going into its
buffercache. But the same problem has always affected other "normal"
block devices, including loop.
[akpm@linux-foundation.org: repair comment layout]
Reported-by: "Jorge Boncompte [DTI2]" <jorge@dti2.net>
Tested-by: "Jorge Boncompte [DTI2]" <jorge@dti2.net>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Filesystem code usually destroys the option buffer while
parsing it. This leads to errors when the same buffer is
passed twice. In case we fill a new superblock do not call
remount.
This is needed to quite a warning that the debugfs code
causes every boot.
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently we held s_umount while a filesystem is frozen, despite that we
might return to userspace and unlock it from a different process. Instead
grab an active reference to keep the file system busy and add an explicit
check for frozen filesystems in remount and reject the remount instead
of blocking on s_umount.
Add a new get_active_super helper to super.c for use by freeze_bdev that
grabs an active reference to a superblock from a given block device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that we have the freeze count there is not much reason for bd_mount_sem
anymore. The actual freeze/thaw operations are serialized using the
bd_fsfreeze_mutex, and the only other place we take bd_mount_sem is
get_sb_bdev which tries to prevent mounting a filesystem while the block
device is frozen. Instead of add a check for bd_fsfreeze_count and
return -EBUSY if a filesystem is frozen. While that is a change in user
visible behaviour a failing mount is much better for this case rather
than having the mount process stuck uninterruptible for a long time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
sb->s_maxbytes is supposed to indicate the maximum size of a file that can
exist on the filesystem. It's declared as an unsigned long long.
Even if a filesystem has no inherent limit that prevents it from using
every bit in that unsigned long long, it's still problematic to set it to
anything larger than MAX_LFS_FILESIZE. There are places in the kernel
that cast s_maxbytes to a signed value. If it's set too large then this
cast makes it a negative number and generally breaks the comparison.
Change s_maxbytes to be loff_t instead. That should help eliminate the
temptation to set it too large by making it a signed value.
Also, add a warning for couple of releases to help catch filesystems that
set s_maxbytes too large. Eventually we can either convert this to a
BUG() or just remove it and in the hope that no one will get it wrong now
that it's a signed value.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Robert Love <rlove@google.com>
Cc: Mandeep Singh Baines <msb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We do this automatically in get_sb_bdev() from the set_bdev_super()
callback. Filesystems that have their own private backing_dev_info
must assign that in ->fill_super().
Note that ->s_bdi assignment is required for proper writeback!
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This gets rid of pdflush for bdi writeout and kupdated style cleaning.
pdflush writeout suffers from lack of locality and also requires more
threads to handle the same workload, since it has to work in a
non-blocking fashion against each queue. This also introduces lumpy
behaviour and potential request starvation, since pdflush can be starved
for queue access if others are accessing it. A sample ffsb workload that
does random writes to files is about 8% faster here on a simple SATA drive
during the benchmark phase. File layout also seems a LOT more smooth in
vmstat:
r b swpd free buff cache si so bi bo in cs us sy id wa
0 1 0 608848 2652 375372 0 0 0 71024 604 24 1 10 48 42
0 1 0 549644 2712 433736 0 0 0 60692 505 27 1 8 48 44
1 0 0 476928 2784 505192 0 0 4 29540 553 24 0 9 53 37
0 1 0 457972 2808 524008 0 0 0 54876 331 16 0 4 38 58
0 1 0 366128 2928 614284 0 0 4 92168 710 58 0 13 53 34
0 1 0 295092 3000 684140 0 0 0 62924 572 23 0 9 53 37
0 1 0 236592 3064 741704 0 0 4 58256 523 17 0 8 48 44
0 1 0 165608 3132 811464 0 0 0 57460 560 21 0 8 54 38
0 1 0 102952 3200 873164 0 0 4 74748 540 29 1 10 48 41
0 1 0 48604 3252 926472 0 0 0 53248 469 29 0 7 47 45
where vanilla tends to fluctuate a lot in the creation phase:
r b swpd free buff cache si so bi bo in cs us sy id wa
1 1 0 678716 5792 303380 0 0 0 74064 565 50 1 11 52 36
1 0 0 662488 5864 319396 0 0 4 352 302 329 0 2 47 51
0 1 0 599312 5924 381468 0 0 0 78164 516 55 0 9 51 40
0 1 0 519952 6008 459516 0 0 4 78156 622 56 1 11 52 37
1 1 0 436640 6092 541632 0 0 0 82244 622 54 0 11 48 41
0 1 0 436640 6092 541660 0 0 0 8 152 39 0 0 51 49
0 1 0 332224 6200 644252 0 0 4 102800 728 46 1 13 49 36
1 0 0 274492 6260 701056 0 0 4 12328 459 49 0 7 50 43
0 1 0 211220 6324 763356 0 0 0 106940 515 37 1 10 51 39
1 0 0 160412 6376 813468 0 0 0 8224 415 43 0 6 49 45
1 1 0 85980 6452 886556 0 0 4 113516 575 39 1 11 54 34
0 2 0 85968 6452 886620 0 0 0 1640 158 211 0 0 46 54
A 10 disk test with btrfs performs 26% faster with per-bdi flushing. A
SSD based writeback test on XFS performs over 20% better as well, with
the throughput being very stable around 1GB/sec, where pdflush only
manages 750MB/sec and fluctuates wildly while doing so. Random buffered
writes to many files behave a lot better as well, as does random mmap'ed
writes.
A separate thread is added to sync the super blocks. In the long term,
adding sync_supers_bdi() functionality could get rid of this thread again.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This is a first step at introducing per-bdi flusher threads. We should
have no change in behaviour, although sb_has_dirty_inodes() is now
ridiculously expensive, as there's no easy way to answer that question.
Not a huge problem, since it'll be deleted in subsequent patches.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Standard trick - add a new variable (start) such that
for each n < start n is known to be busy. Allocation can
skip checking everything in [0..start) and if it returns
n, we can set start to n + 1. Freeing below start sets
start to what we'd just freed.
Of course, it still sucks if we do something like
free 0
allocate
allocate
in a loop - still O(n^2) time. However, on saner loads it
improves the things a lot and the entire thing is not worth
the trouble of switching to something with better worst-case
behaviour.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 337eb00a2c
Push BKL down into ->remount_fs()
and
commit 4aa98cf768
Push BKL down into do_remount_sb()
were uncorrectly merged.
The former removes one pair of lock/unlock_kernel(), but the latter adds
several unlock_kernel(). Finally a few unlock_kernel() calls left.
Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Push down lock_super into ->write_super instances and remove it from the
caller.
Following filesystem don't need ->s_lock in ->write_super and are skipped:
* bfs, nilfs2 - no other uses of s_lock and have internal locks in
->write_super
* ext2 - uses BKL in ext2_write_super and has internal calls without s_lock
* reiserfs - no other uses of s_lock as has reiserfs_write_lock (BKL) in
->write_super
* xfs - no other uses of s_lock and uses internal lock (buffer lock on
superblock buffer) to serialize ->write_super. Also xfs_fs_write_super
is superflous and will go away in the next merge window
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Note that since we can't run into contention between remount_fs and write_super
(due to exclusion on s_umount), we have to care only about filesystems that
touch lock_super() on their own. Out of those ext3, ext4, hpfs, sysv and ufs
do need it; fat doesn't since its ->remount_fs() only accesses assign-once
data (basically, it's "we have no atime on directories and only have atime on
files for vfat; force nodiratime and possibly noatime into *flags").
[folded a build fix from hch]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move BKL into ->put_super from the only caller. A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment. Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.
[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We can't run into contention on it. All other callers of lock_super()
either hold s_umount (and we have it exclusive) or hold an active
reference to superblock in question, which prevents the call of
generic_shutdown_super() while the reference is held. So we can
replace lock_super(s) with get_fs_excl() in generic_shutdown_super()
(and corresponding change for unlock_super(), of course).
Since ext4 expects s_lock held for its put_super, take lock_super()
into it. The rest of filesystems do not care at all.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge the write_super helper into sync_super and move the check for
->write_super earlier so that we can avoid grabbing a reference to
a superblock that doesn't have it.
While we're at it also add a little comment documenting sync_supers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We just did a full fs writeout using sync_filesystem before, and if
that's not enough for the filesystem it can perform it's own writeout
in ->put_super, which many filesystems already do.
Move a call to foofs_write_super into every foofs_put_super for now to
guarantee identical behaviour until it's cleaned up by the individual
filesystem maintainers.
Exceptions:
- affs already has identical copy & pasted code at the beginning of
affs_put_super so no need to do it twice.
- xfs does the right thing without it and I have changes pending for
the xfs tree touching this are so I don't really need conflicts
here..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rename the function so that it better describe what it really does. Also
remove the unnecessary include of buffer_head.h.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move sync_filesystems(), __fsync_super(), fsync_super() from
super.c to sync.c where it fits better.
[build fixes folded]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It is unnecessarily fragile to have two places (fsync_super() and do_sync())
doing data integrity sync of the filesystem. Alter __fsync_super() to
accommodate needs of both callers and use it. So after this patch
__fsync_super() is the only place where we gather all the calls needed to
properly send all data on a filesystem to disk.
Nice bonus is that we get a complete livelock avoidance and write_supers()
is now only used for periodic writeback of superblocks.
sync_blockdevs() introduced a couple of patches ago is gone now.
[build fixes folded]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__fsync_super() does the same thing as fsync_super(). So change the only
caller to use fsync_super() and make __fsync_super() static. This removes
unnecessarily duplicated call to sync_blockdev() and prepares ground
for the changes to __fsync_super() in the following patches.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
sync_filesystems() has a condition that if wait == 0 and s_dirt == 0, then
->sync_fs() isn't called. This does not really make much sence since s_dirt is
generally used by a filesystem to mean that ->write_super() needs to be called.
But ->sync_fs() does different things. I even suspect that some filesystems
(btrfs?) sets s_dirt just to fool this logic.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
So far, do_sync() called:
sync_inodes(0);
sync_supers();
sync_filesystems(0);
sync_filesystems(1);
sync_inodes(1);
This ordering makes it kind of hard for filesystems as sync_inodes(0) need not
submit all the IO (for example it skips inodes with I_SYNC set) so e.g. forcing
transaction to disk in ->sync_fs() is not really enough. Therefore sys_sync has
not been completely reliable on some filesystems (ext3, ext4, reiserfs, ocfs2
and others are hit by this) when racing e.g. with background writeback. A
similar problem hits also other filesystems (e.g. ext2) because of
write_supers() being called before the sync_inodes(1).
Change the ordering of calls in do_sync() - this requires a new function
sync_blockdevs() to preserve the property that block devices are always synced
after write_super() / sync_fs() call.
The same issue is fixed in __fsync_super() function used on umount /
remount read-only.
[AV: build fixes]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove the unused s_async_list in the superblock, a leftover of the
broken async inode deletion code that leaked into mainline. Having this
in the middle of the sync/unmount path is not helpful for the following
cleanups.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This function walks the s_files lock, and operates primarily on the
files in a superblock, so it better belongs here (eg. see also
fs_may_remount_ro).
[AV: ... and it shouldn't be static after that move]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
