When memory is exhausted, nfct_seqadj_ext_add may fail to add the
synproxy and seqadj extensions. The function nf_ct_seqadj_init doesn't
check if get valid seqadj pointer by the nfct_seqadj.
Now drop the packet directly when fail to add seqadj extension to
avoid dereference NULL pointer in nf_ct_seqadj_init from
init_conntrack().
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_nat_setup_info() returns NF_* verdicts, so convert them to error
codes that is what ctnelink expects. This has passed overlook without
having any impact since this nf_nat_setup_info() has always returned
NF_ACCEPT so far. Since 870190a9ec ("netfilter: nat: convert nat bysrc
hash to rhashtable"), this is problem.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
NFTA_TRACE_POLICY attribute is big endian, but we forget to call
htonl to convert it. Fortunately, this attribute is parsed as big
endian in libnftnl.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We have already use skb_header_pointer to get the ip header pointer,
so there's no need to use ip_hdr again. Moreover, in NETDEV INGRESS
hook, ip header maybe not linear, so use ip_hdr is not appropriate,
remove it.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
"meta pkttype set" is only supported on prerouting chain with bridge
family and ingress chain with netdev family.
But the validate check is incomplete, and the user can add the nft
rules on input chain with bridge family, for example:
# nft add table bridge filter
# nft add chain bridge filter input {type filter hook input \
priority 0 \;}
# nft add chain bridge filter test
# nft add rule bridge filter test meta pkttype set unicast
# nft add rule bridge filter input jump test
This patch fixes the problem.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
KASAN reported this bug:
BUG: KASAN: use-after-free in icmp_packet+0x25/0x50 [nf_conntrack_ipv4] at
addr ffff880002db08c8
Read of size 4 by task lt-nf-queue/19041
Call Trace:
<IRQ> [<ffffffff815eeebb>] dump_stack+0x63/0x88
[<ffffffff813386f8>] kasan_report_error+0x528/0x560
[<ffffffff81338cc8>] kasan_report+0x58/0x60
[<ffffffffa07393f5>] ? icmp_packet+0x25/0x50 [nf_conntrack_ipv4]
[<ffffffff81337551>] __asan_load4+0x61/0x80
[<ffffffffa07393f5>] icmp_packet+0x25/0x50 [nf_conntrack_ipv4]
[<ffffffffa06ecaa0>] nf_conntrack_in+0x550/0x980 [nf_conntrack]
[<ffffffffa06ec550>] ? __nf_conntrack_confirm+0xb10/0xb10 [nf_conntrack]
[ ... ]
The main reason is that we missed to unlink the timeout objects in the
unconfirmed ct lists, so we will access the timeout objects that have
already been freed.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We forget to call nf_ct_l4proto_put when replacing the existing
timeout policy. Acctually, there's no need to get ct l4proto
before doing replace, so we can move it to a later position.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
cttimeout and acct objects are deleted from the list while traversing
it, so use list_for_each_entry is unsafe here.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
After I add the nft rule "nft add rule filter prerouting reject
with tcp reset", kernel panic happened on my system:
NULL pointer dereference at ...
IP: [<ffffffff81b9db2f>] nf_send_reset+0xaf/0x400
Call Trace:
[<ffffffff81b9da80>] ? nf_reject_ip_tcphdr_get+0x160/0x160
[<ffffffffa0928061>] nft_reject_ipv4_eval+0x61/0xb0 [nft_reject_ipv4]
[<ffffffffa08e836a>] nft_do_chain+0x1fa/0x890 [nf_tables]
[<ffffffffa08e8170>] ? __nft_trace_packet+0x170/0x170 [nf_tables]
[<ffffffffa06e0900>] ? nf_ct_invert_tuple+0xb0/0xc0 [nf_conntrack]
[<ffffffffa07224d4>] ? nf_nat_setup_info+0x5d4/0x650 [nf_nat]
[...]
Because in the PREROUTING chain, routing information is not exist,
then we will dereference the NULL pointer and oops happen.
So we restrict reject expression to INPUT, FORWARD and OUTPUT chain.
This is consistent with iptables REJECT target.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In general, when we want to delete a netns, cttimeout_net_exit will
be called before ipt_unregister_table, i.e. before ctnl_timeout_put.
But after call kfree_rcu in cttimeout_net_exit, we will still decrease
the timeout object's refcnt in ctnl_timeout_put, this is incorrect,
and will cause a use after free error.
It is easy to reproduce this problem:
# while : ; do
ip netns add xxx
ip netns exec xxx nfct add timeout testx inet icmp timeout 200
ip netns exec xxx iptables -t raw -p icmp -I OUTPUT -j CT --timeout testx
ip netns del xxx
done
=======================================================================
BUG kmalloc-96 (Tainted: G B E ): Poison overwritten
-----------------------------------------------------------------------
INFO: 0xffff88002b5161e8-0xffff88002b5161e8. First byte 0x6a instead of
0x6b
INFO: Allocated in cttimeout_new_timeout+0xd4/0x240 [nfnetlink_cttimeout]
age=104 cpu=0 pid=3330
___slab_alloc+0x4da/0x540
__slab_alloc+0x20/0x40
__kmalloc+0x1c8/0x240
cttimeout_new_timeout+0xd4/0x240 [nfnetlink_cttimeout]
nfnetlink_rcv_msg+0x21a/0x230 [nfnetlink]
[ ... ]
So only when the refcnt decreased to 0, we call kfree_rcu to free the
timeout object. And like nfnetlink_acct do, use atomic_cmpxchg to
avoid race between ctnl_timeout_try_del and ctnl_timeout_put.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Suppose that we input the following commands at first:
# nfacct add test
# iptables -A INPUT -m nfacct --nfacct-name test
And now "test" acct's refcnt is 2, but later when we try to delete the
"test" nfacct and the related iptables rule at the same time, race maybe
happen:
CPU0 CPU1
nfnl_acct_try_del nfnl_acct_put
atomic_dec_and_test //ref=1,testfail -
- atomic_dec_and_test //ref=0,testok
- kfree_rcu
atomic_inc //ref=1 -
So after the rcu grace period, nf_acct will be freed but it is still linked
in the nfnl_acct_list, and we can access it later, then oops will happen.
Convert atomic_dec_and_test and atomic_inc combinaiton to one atomic
operation atomic_cmpxchg here to fix this problem.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
inet_lookup_listener() and inet6_lookup_listener() no longer
take a reference on the found listener.
This minimal patch adds back the refcounting, but we might do
this differently in net-next later.
Fixes: 3b24d854cb ("tcp/dccp: do not touch listener sk_refcnt under synflood")
Reported-and-tested-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We should report the over quota message to the right net namespace
instead of the init netns.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Otherwise, if nfnetlink_log.ko is not loaded, we cannot add rules
to log packets to the userspace when we specify it with arp family,
such as:
# nft add rule arp filter input log group 0
<cmdline>:1:1-37: Error: Could not process rule: No such file or
directory
add rule arp filter input log group 0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We should skip the conntracks that belong to a different namespace,
otherwise other unrelated netns's conntrack entries will be dumped via
/proc/net/nf_conntrack.
Fixes: 56d52d4892 ("netfilter: conntrack: use a single hashtable for all namespaces")
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fix the direct assignment of offset and length attributes included in
nft_exthdr structure from u32 data to u8.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently, user can add a conntrack with different l4proto via nfnetlink.
For example, original tuple is TCP while reply tuple is SCTP. This is
invalid combination, we should report EINVAL to userspace.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Like NFQNL_MSG_VERDICT_BATCH do, we should also reject the verdict
request when the portid is not same with the initial portid(maybe
from another process).
Fixes: 97d32cf944 ("netfilter: nfnetlink_queue: batch verdict support")
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
User can use NFQA_EXP to attach expectations to conntracks, but we
forget to put back nf_conntrack_expect when it is inserted successfully,
i.e. in this normal case, expect's use refcnt will be 3. So even we
unlink it and put it back later, the use refcnt is still 1, then the
memory will be leaked forever.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The 'name' filed in struct nf_conntrack_expect_policy{} is not a
pointer, so check it is NULL or not will always return true. Even if the
name is empty, slash will always be displayed like follows:
# cat /proc/net/nf_conntrack_expect
297 l3proto = 2 proto=6 src=1.1.1.1 dst=2.2.2.2 sport=1 dport=1025 ftp/
^
Fixes: 3a8fc53a45 ("netfilter: nf_ct_helper: allocate 16 bytes for the helper and policy names")
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Do not drop packet when CSeq is 0 as 0 is also a valid value for CSeq.
simple_strtoul() will return 0 either when all digits are 0
or if there are no digits at all. Therefore when simple_strtoul()
returns 0 we check if first character is digit 0 or not.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If we find a matching element that is inactive with no descendants, we
jump to the found label, then crash because of nul-dereference on the
left branch.
Fix this by checking that the element is active and not an interval end
and skipping the logic that only applies to the tree iteration.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tested-by: Anders K. Pedersen <akp@akp.dk>
Commit 96d1327ac2 ("netfilter: h323: Use mod_timer instead of
set_expect_timeout") just simplify the source codes
if (!del_timer(&exp->timeout))
return 0;
add_timer(&exp->timeout);
to mod_timer(&exp->timeout, jiffies + info->timeout * HZ);
This is not correct, and introduce a race codition:
CPU0 CPU1
- timer expire
process_rcf expectation_timed_out
lock(exp_lock) -
find_exp waiting exp_lock...
re-activate timer!! waiting exp_lock...
unlock(exp_lock) lock(exp_lock)
- unlink expect
- free(expect)
- unlock(exp_lock)
So when the timer expires again, we will access the memory that
was already freed.
Replace mod_timer with mod_timer_pending here to fix this problem.
Fixes: 96d1327ac2 ("netfilter: h323: Use mod_timer instead of set_expect_timeout")
Cc: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull networking updates from David Miller:
1) Unified UDP encapsulation offload methods for drivers, from
Alexander Duyck.
2) Make DSA binding more sane, from Andrew Lunn.
3) Support QCA9888 chips in ath10k, from Anilkumar Kolli.
4) Several workqueue usage cleanups, from Bhaktipriya Shridhar.
5) Add XDP (eXpress Data Path), essentially running BPF programs on RX
packets as soon as the device sees them, with the option to mirror
the packet on TX via the same interface. From Brenden Blanco and
others.
6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet.
7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli.
8) Simplify netlink conntrack entry layout, from Florian Westphal.
9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido
Schimmel, Yotam Gigi, and Jiri Pirko.
10) Add SKB array infrastructure and convert tun and macvtap over to it.
From Michael S Tsirkin and Jason Wang.
11) Support qdisc packet injection in pktgen, from John Fastabend.
12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy.
13) Add NV congestion control support to TCP, from Lawrence Brakmo.
14) Add GSO support to SCTP, from Marcelo Ricardo Leitner.
15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni.
16) Support MPLS over IPV4, from Simon Horman.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
xgene: Fix build warning with ACPI disabled.
be2net: perform temperature query in adapter regardless of its interface state
l2tp: Correctly return -EBADF from pppol2tp_getname.
net/mlx5_core/health: Remove deprecated create_singlethread_workqueue
net: ipmr/ip6mr: update lastuse on entry change
macsec: ensure rx_sa is set when validation is disabled
tipc: dump monitor attributes
tipc: add a function to get the bearer name
tipc: get monitor threshold for the cluster
tipc: make cluster size threshold for monitoring configurable
tipc: introduce constants for tipc address validation
net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update()
MAINTAINERS: xgene: Add driver and documentation path
Documentation: dtb: xgene: Add MDIO node
dtb: xgene: Add MDIO node
drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset
drivers: net: xgene: Use exported functions
drivers: net: xgene: Enable MDIO driver
drivers: net: xgene: Add backward compatibility
drivers: net: phy: xgene: Add MDIO driver
...
Pull locking updates from Ingo Molnar:
"The locking tree was busier in this cycle than the usual pattern - a
couple of major projects happened to coincide.
The main changes are:
- implement the atomic_fetch_{add,sub,and,or,xor}() API natively
across all SMP architectures (Peter Zijlstra)
- add atomic_fetch_{inc/dec}() as well, using the generic primitives
(Davidlohr Bueso)
- optimize various aspects of rwsems (Jason Low, Davidlohr Bueso,
Waiman Long)
- optimize smp_cond_load_acquire() on arm64 and implement LSE based
atomic{,64}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
on arm64 (Will Deacon)
- introduce smp_acquire__after_ctrl_dep() and fix various barrier
mis-uses and bugs (Peter Zijlstra)
- after discovering ancient spin_unlock_wait() barrier bugs in its
implementation and usage, strengthen its semantics and update/fix
usage sites (Peter Zijlstra)
- optimize mutex_trylock() fastpath (Peter Zijlstra)
- ... misc fixes and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
locking/atomic: Introduce inc/dec variants for the atomic_fetch_$op() API
locking/barriers, arch/arm64: Implement LDXR+WFE based smp_cond_load_acquire()
locking/static_keys: Fix non static symbol Sparse warning
locking/qspinlock: Use __this_cpu_dec() instead of full-blown this_cpu_dec()
locking/atomic, arch/tile: Fix tilepro build
locking/atomic, arch/m68k: Remove comment
locking/atomic, arch/arc: Fix build
locking/Documentation: Clarify limited control-dependency scope
locking/atomic, arch/rwsem: Employ atomic_long_fetch_add()
locking/atomic, arch/qrwlock: Employ atomic_fetch_add_acquire()
locking/atomic, arch/mips: Convert to _relaxed atomics
locking/atomic, arch/alpha: Convert to _relaxed atomics
locking/atomic: Remove the deprecated atomic_{set,clear}_mask() functions
locking/atomic: Remove linux/atomic.h:atomic_fetch_or()
locking/atomic: Implement atomic{,64,_long}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
locking/atomic: Fix atomic64_relaxed() bits
locking/atomic, arch/xtensa: Implement atomic_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/x86: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/tile: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/sparc: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
...
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next,
they are:
1) Count pre-established connections as active in "least connection"
schedulers such that pre-established connections to avoid overloading
backend servers on peak demands, from Michal Kubecek via Simon Horman.
2) Address a race condition when resizing the conntrack table by caching
the bucket size when fulling iterating over the hashtable in these
three possible scenarios: 1) dump via /proc/net/nf_conntrack,
2) unlinking userspace helper and 3) unlinking custom conntrack timeout.
From Liping Zhang.
3) Revisit early_drop() path to perform lockless traversal on conntrack
eviction under stress, use del_timer() as synchronization point to
avoid two CPUs evicting the same entry, from Florian Westphal.
4) Move NAT hlist_head to nf_conn object, this simplifies the existing
NAT extension and it doesn't increase size since recent patches to
align nf_conn, from Florian.
5) Use rhashtable for the by-source NAT hashtable, also from Florian.
6) Don't allow --physdev-is-out from OUTPUT chain, just like
--physdev-out is not either, from Hangbin Liu.
7) Automagically set on nf_conntrack counters if the user tries to
match ct bytes/packets from nftables, from Liping Zhang.
8) Remove possible_net_t fields in nf_tables set objects since we just
simply pass the net pointer to the backend set type implementations.
9) Fix possible off-by-one in h323, from Toby DiPasquale.
10) early_drop() may be called from ctnetlink patch, so we must hold
rcu read size lock from them too, this amends Florian's patch #3
coming in this batch, from Liping Zhang.
11) Use binary search to validate jump offset in x_tables, this
addresses the O(n!) validation that was introduced recently
resolve security issues with unpriviledge namespaces, from Florian.
12) Fix reference leak to connlabel in error path of nft_ct, from Zhang.
13) Three updates for nft_log: Fix log prefix leak in error path. Bail
out on loglevel larger than debug in nft_log and set on the new
NF_LOG_F_COPY_LEN flag when snaplen is specified. Again from Zhang.
14) Allow to filter rule dumps in nf_tables based on table and chain
names.
15) Simplify connlabel to always use 128 bits to store labels and
get rid of unused function in xt_connlabel, from Florian.
16) Replace set_expect_timeout() by mod_timer() from the h323 conntrack
helper, by Gao Feng.
17) Put back x_tables module reference in nft_compat on error, from
Liping Zhang.
18) Add a reference count to the x_tables extensions cache in
nft_compat, so we can remove them when unused and avoid a crash
if the extensions are rmmod, again from Zhang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We "cache" the loaded match/target modules and reuse them, but when the
modules are removed, we still point to them. Then we may end up with
invalid memory references when using iptables-compat to add rules later.
Input the following commands will reproduce the kernel crash:
# iptables-compat -A INPUT -j LOG
# iptables-compat -D INPUT -j LOG
# rmmod xt_LOG
# iptables-compat -A INPUT -j LOG
BUG: unable to handle kernel paging request at ffffffffa05a9010
IP: [<ffffffff813f783e>] strcmp+0xe/0x30
Call Trace:
[<ffffffffa05acc43>] nft_target_select_ops+0x83/0x1f0 [nft_compat]
[<ffffffffa058a177>] nf_tables_expr_parse+0x147/0x1f0 [nf_tables]
[<ffffffffa058e541>] nf_tables_newrule+0x301/0x810 [nf_tables]
[<ffffffff8141ca00>] ? nla_parse+0x20/0x100
[<ffffffffa057fa8f>] nfnetlink_rcv+0x33f/0x53d [nfnetlink]
[<ffffffffa057f94b>] ? nfnetlink_rcv+0x1fb/0x53d [nfnetlink]
[<ffffffff817116b8>] netlink_unicast+0x178/0x220
[<ffffffff81711a5b>] netlink_sendmsg+0x2fb/0x3a0
[<ffffffff816b7fc8>] sock_sendmsg+0x38/0x50
[<ffffffff816b8a7e>] ___sys_sendmsg+0x28e/0x2a0
[<ffffffff816bcb7e>] ? release_sock+0x1e/0xb0
[<ffffffff81804ac5>] ? _raw_spin_unlock_bh+0x35/0x40
[<ffffffff816bcbe2>] ? release_sock+0x82/0xb0
[<ffffffff816b93d4>] __sys_sendmsg+0x54/0x90
[<ffffffff816b9422>] SyS_sendmsg+0x12/0x20
[<ffffffff81805172>] entry_SYSCALL_64_fastpath+0x1a/0xa9
So when nobody use the related match/target module, there's no need to
"cache" it. And nft_[match|target]_release are useless anymore, remove
them.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If the user specify the invalid NFTA_MATCH_INFO/NFTA_TARGET_INFO attr
or memory alloc fail, we should call module_put to the related match
or target. Otherwise, we cannot remove the module even nobody use it.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simplify the code without any side effect. The set_expect_timeout is
used to modify the timer expired time. It tries to delete timer, and
add it again. So we could use mod_timer directly.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The conntrack label extension is currently variable-sized, e.g. if
only 2 labels are used by iptables rules then the labels->bits[] array
will only contain one element.
We track size of each label storage area in the 'words' member.
But in nftables and openvswitch we always have to ask for worst-case
since we don't know what bit will be used at configuration time.
As most arches are 64bit we need to allocate 24 bytes in this case:
struct nf_conn_labels {
u8 words; /* 0 1 */
/* XXX 7 bytes hole, try to pack */
long unsigned bits[2]; /* 8 24 */
Make bits a fixed size and drop the words member, it simplifies
the code and only increases memory requirements on x86 when
less than 64bit labels are required.
We still only allocate the extension if its needed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If the table and/or chain attributes are set in a rule dump request,
we filter out the rules based on this selection.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There's a similar problem in xt_NFLOG, and was fixed by commit 7643507fe8
("netfilter: xt_NFLOG: nflog-range does not truncate packets"). Only set
copy_len here does not work, so we should enable NF_LOG_F_COPY_LEN also.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
User can specify the log level larger than 7(debug level) via
nfnetlink, this is invalid. So in this case, we should report
EINVAL to the userspace.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Suppose that we specify the NFTA_LOG_PREFIX, then NFTA_LOG_LEVEL
and NFTA_LOG_GROUP are specified together or nf_logger_find_get
call returns fail, i.e. expr init fail, memory leak will happen.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add nf_ct_helper_init(), nf_conntrack_helpers_register() and
nf_conntrack_helpers_unregister() functions to avoid repetitive
opencoded initialization in helpers.
This patch keeps an id parameter for nf_ct_helper_init() not to break
helper matching by name that has been inconsistently exposed to
userspace through ports, eg. ftp-2121, and through an incremental id,
eg. tftp-1.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We only get nf_connlabels if the user add ct label set expr successfully,
but we will also put nf_connlabels if the user delete ct lable get expr.
This is mismathced, and will cause ct label expr cannot work properly.
Also, if we init something fail, we should put nf_connlabels back.
Otherwise, we may waste to alloc the memory that will never be used.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The dummy ruleset I used to test the original validation change was broken,
most rules were unreachable and were not tested by mark_source_chains().
In some cases rulesets that used to load in a few seconds now require
several minutes.
sample ruleset that shows the behaviour:
echo "*filter"
for i in $(seq 0 100000);do
printf ":chain_%06x - [0:0]\n" $i
done
for i in $(seq 0 100000);do
printf -- "-A INPUT -j chain_%06x\n" $i
printf -- "-A INPUT -j chain_%06x\n" $i
printf -- "-A INPUT -j chain_%06x\n" $i
done
echo COMMIT
[ pipe result into iptables-restore ]
This ruleset will be about 74mbyte in size, with ~500k searches
though all 500k[1] rule entries. iptables-restore will take forever
(gave up after 10 minutes)
Instead of always searching the entire blob for a match, fill an
array with the start offsets of every single ipt_entry struct,
then do a binary search to check if the jump target is present or not.
After this change ruleset restore times get again close to what one
gets when reverting 3647234101 (~3 seconds on my workstation).
[1] every user-defined rule gets an implicit RETURN, so we get
300k jumps + 100k userchains + 100k returns -> 500k rule entries
Fixes: 3647234101 ("netfilter: x_tables: validate targets of jumps")
Reported-by: Jeff Wu <wujiafu@gmail.com>
Tested-by: Jeff Wu <wujiafu@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The clash resolution is not easy to apply if the NAT table is
registered. Even if no NAT rules are installed, the nul-binding ensures
that a unique tuple is used, thus, the packet that loses race gets a
different source port number, as described by:
http://marc.info/?l=netfilter-devel&m=146818011604484&w=2
Clash resolution with NAT is also problematic if addresses/port range
ports are used since the conntrack that wins race may describe a
different mangling that we may have earlier applied to the packet via
nf_nat_setup_info().
Fixes: 71d8c47fc6 ("netfilter: conntrack: introduce clash resolution on insertion race")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tested-by: Marc Dionne <marc.c.dionne@gmail.com>
User can add ct entry via nfnetlink(IPCTNL_MSG_CT_NEW), and if the total
number reach the nf_conntrack_max, we will try to drop some ct entries.
But in this case(the main function call path is ctnetlink_create_conntrack
-> nf_conntrack_alloc -> early_drop), rcu_read_lock is not held, so race
with hash resize will happen.
Fixes: 242922a027 ("netfilter: conntrack: simplify early_drop")
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch corrects an off-by-one error in the DecodeQ931 function in
the nf_conntrack_h323 module. This error could result in reading off
the end of a Q.931 frame.
Signed-off-by: Toby DiPasquale <toby@cbcg.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simon Horman says:
====================
IPVS Updates for v4.8
please consider these enhancements to the IPVS. This alters the behaviour
of the "least connection" schedulers such that pre-established connections
are included in the active connection count. This avoids overloading
servers when a large number of new connections arrive in a short space of
time - e.g. when clients reconnect after a node or network failure.
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We can pass the netns pointer as parameter to the functions that need to
gain access to it. From basechains, I didn't find any client for this
field anymore so let's remove this too.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If we want to use ct packets expr, and add a rule like follows:
# nft add rule filter input ct packets gt 1 counter
We will find that no packets will hit it, because
nf_conntrack_acct is disabled by default. So It will
not work until we enable it manually via
"echo 1 > /proc/sys/net/netfilter/nf_conntrack_acct".
This is not friendly, so like xt_connbytes do, if the user
want to use ct byte/packet expr, enable nf_conntrack_acct
automatically.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
physdev_mt() will check skb->nf_bridge first, which was alloced in
br_nf_pre_routing. So if we want to use --physdev-out and physdev-is-out,
we need to match it in FORWARD or POSTROUTING chain. physdev_mt_check()
only checked physdev-out and missed physdev-is-out. Fix it and update the
debug message to make it clearer.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Marcelo R Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
It did use a fixed-size bucket list plus single lock to protect add/del.
Unlike the main conntrack table we only need to add and remove keys.
Convert it to rhashtable to get table autosizing and per-bucket locking.
The maximum number of entries is -- as before -- tied to the number of
conntracks so we do not need another upperlimit.
The change does not handle rhashtable_remove_fast error, only possible
"error" is -ENOENT, and that is something that can happen legitimetely,
e.g. because nat module was inserted at a later time and no src manip
took place yet.
Tested with http-client-benchmark + httpterm with DNAT and SNAT rules
in place.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simon Horman says:
====================
Second Round of IPVS Fixes for v4.7
The fix from Quentin Armitage allows the backup sync daemon to
be bound to a link-local mcast IPv6 address as is already the case
for IPv4.
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The nat extension structure is 32bytes in size on x86_64:
struct nf_conn_nat {
struct hlist_node bysource; /* 0 16 */
struct nf_conn * ct; /* 16 8 */
union nf_conntrack_nat_help help; /* 24 4 */
int masq_index; /* 28 4 */
/* size: 32, cachelines: 1, members: 4 */
/* last cacheline: 32 bytes */
};
The hlist is needed to quickly check for possible tuple collisions
when installing a new nat binding. Storing this in the extension
area has two drawbacks:
1. We need ct backpointer to get the conntrack struct from the extension.
2. When reallocation of extension area occurs we need to fixup the bysource
hash head via hlist_replace_rcu.
We can avoid both by placing the hlist_head in nf_conn and place nf_conn in
the bysource hash rather than the extenstion.
We can also remove the ->move support; no other extension needs it.
Moving the entire nat extension into nf_conn would be possible as well but
then we have to add yet another callback for deletion from the bysource
hash table rather than just using nat extension ->destroy hook for this.
nf_conn size doesn't increase due to aligment, followup patch replaces
hlist_node with single pointer.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We don't need to acquire the bucket lock during early drop, we can
use lockless traveral just like ____nf_conntrack_find.
The timer deletion serves as synchronization point, if another cpu
attempts to evict same entry, only one will succeed with timer deletion.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
