redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity
873,803 Commits
15 Branches
0 Tags
3.4 GiB
Commit Graph

3 Commits (c4ae264ae8f659c5bc8f4467b41db97ae489df3d)

Author SHA1 Message Date
Michal Vokáč 15b43e497f ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch 
The switch is accessible through pseudo PHY which is located at 0x10.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Fixes: 87489ec3a7 ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
 2019-03-22 09:20:32 +08:00
Michal Vokáč 1a7ee0efb2 ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port 
Use rgmii-id phy mode for the CPU port (MAC0) of the QCA8334 switch
to add delays to both Tx and Rx clock.

It worked with the rgmii mode before because the qca8k driver
(incorrectly) enabled delays in that mode and rgmii-id was not
implemented at all.

Commit 5ecdd77c61 ("net: dsa: qca8k: disable delay for RGMII mode")
removed the delays from the RGMII mode and hence broke the networking.

To fix the problem, commit a968b5e9d5 ("net: dsa: qca8k: Enable delay
for RGMII_ID mode") was introduced.

Now the correct phy mode is available so use it.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
 2019-03-19 16:48:00 +08:00
Vokáč Michal 87489ec3a7 ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards 
These are i.MX6S/DL based SBCs embedded in various Y Soft products.
All share the same board design but have slightly different HW
configuration.

Ursa
- i.MX6S SoC, 512MB RAM DDR3, 4GB eMMC, microSD
- parallel WVGA 7" LCD with touch panel
- 1x Eth (QCA8334 switch)
- USB OTG
- USB host (micro-B)

Draco
- i.MX6S SoC, 512MB RAM DDR3, 4GB eMMC, microSD
- parallel WVGA 7" LCD with touch panel
- 2x Eth (QCA8334 switch)
- USB OTG
- USB host (micro-B)
- RGB LED (I2C LP5562)
- 3.5mm audio jack + codec (LM49350)

Hydra
- i.MX6DL SoC, 2GB RAM DDR3, 4GB eMMC, microSD
- I2C OLED display, capacitive matrix keys
- 2x Eth (QCA8334 switch)
- USB OTG
- RGB LED (I2C LP5562)
- 3.5mm audio jack + codec (LM49350)
- HDMI
- miniPCIe slot

Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
 2019-02-11 09:22:25 +08:00