1
0
Fork 0
Commit Graph

130 Commits (c512c69187197fe08026cb5bbe7b9709f4f89b73)

Author SHA1 Message Date
Ingo Molnar 74b6eb6b93 Merge branches 'x86/asm', 'x86/cleanups', 'x86/cpudetect', 'x86/debug', 'x86/doc', 'x86/header-fixes', 'x86/mm', 'x86/paravirt', 'x86/pat', 'x86/setup-v2', 'x86/subarch', 'x86/uaccess' and 'x86/urgent' into x86/core 2009-01-28 23:13:53 +01:00
Ingo Molnar d5e397cb49 x86: improve early fault/irq printout
Impact: add a stack dump to early IRQs/faults

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-26 14:22:00 +01:00
Ingo Molnar 34707bcd04 x86, debug: remove early_printk() #ifdefs from head_32.S
Impact: cleanup

Remove such constructs:

 #ifdef CONFIG_EARLY_PRINTK
        call early_printk
 #else
        call printk
 #endif

Not only are they ugly, they are also pointless: a call to printk()
maps to early_printk during early bootup anyway, if CONFIG_EARLY_PRINTK
is enabled.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-26 14:18:43 +01:00
Brian Gerst 0dd76d736e x86: set %fs to __KERNEL_PERCPU unconditionally for x86_32
Impact: cleanup

%fs is currently set to __KERNEL_DS at boot, and conditionally
switched to __KERNEL_PERCPU for secondary cpus.  Instead, initialize
GDT_ENTRY_PERCPU to the same attributes as GDT_ENTRY_KERNEL_DS and
set %fs to __KERNEL_PERCPU unconditionally.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-21 17:26:05 +09:00
Suresh Siddha b2bc273146 x86, cpa: rename PTE attribute macros for kernel direct mapping in early boot
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: arjan@linux.intel.com
Cc: venkatesh.pallipadi@intel.com
Cc: jeremy@goop.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-10 19:29:11 +02:00
Thomas Gleixner 583323b9d2 x86: fix cpu hotplug on 32bit
commit 3e9704739d ("x86: boot secondary
cpus through initial_code") causes the kernel to crash when a CPU is
brought online after the read only sections have been write
protected. The write to initial_code in do_boot_cpu() fails.

Move inital_code to .cpuinit.data section.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
2008-07-27 21:43:11 +02:00
Glauber Costa 3e9704739d x86: boot secondary cpus through initial_code
remove "initialize_secondary". Boot both architectures via
initial_code.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:48:18 +02:00
Glauber Costa e3f77edfc1 x86: use initial_code for i386
x86_64 jumps to whatever is written in "initial_code" symbol,
instead of a fixed address. Do it for i386 too. It will allow us
to integrate more of the smp boot code.

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:48:17 +02:00
Ingo Molnar 896395c290 Merge branch 'linus' into tmp.x86.mpparse.new 2008-07-08 10:32:56 +02:00
Joe Korty 86b2b70e15 x86: fix asm warning in head_32.S
On Mon, May 19, 2008 at 04:10:02PM -0700, Linus Torvalds wrote:
> It also causes these warnings on 32-bit PAE:
>
> 	  AS      arch/x86/kernel/head_32.o
> 	arch/x86/kernel/head_32.S: Assembler messages:
> 	arch/x86/kernel/head_32.S:225: Warning: left operand is a bignum; integer 0 assumed
> 	arch/x86/kernel/head_32.S:609: Warning: left operand is a bignum; integer 0 assumed
>
> and I do not see why (the end result seems to be identical).

Fix head_32.S gcc bignum warnings when CONFIG_PAE=y.

    arch/x86/kernel/head_32.S: Assembler messages:
    arch/x86/kernel/head_32.S:225: Warning: left operand is a bignum; integer 0 assumed
    arch/x86/kernel/head_32.S:609: Warning: left operand is a bignum; integer 0 assumed

The assembler was stumbling over the 64-bit constant 0x100000000 in the
KPMDS #define.

Testing: a cmp(1) on head_32.o before and after shows the binary is unchanged.

Signed-off-by: Joe Korty <joe.korty@ccur.com
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Gabriel C <nix.or.die@googlemail.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: "Pallipadi Venkatesh" <venkatesh.pallipadi@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: "Siddha Suresh B" <suresh.b.siddha@intel.com>
Cc: bugme-daemon@bugzilla.kernel.org
Cc: airlied@linux.ie
Cc: "Barnes Jesse" <jesse.barnes@intel.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-12 21:26:12 +02:00
Yinghai Lu 6af61a7614 x86: clean up max_pfn_mapped usage - 32-bit
on 32-bit in head_32.S after initial page table is done, we get initial
max_pfn_mapped, and then kernel_physical_mapping_init will give us
a final one.

We need to use that to make sure find_e820_area will get valid addresses
for boot_map and for NODE_DATA(0) on numa32.

XEN PV and lguest may need to assign max_pfn_mapped too.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-03 13:26:28 +02:00
Yinghai Lu f0d43100f1 x86: extend e820 early_res support 32bit -fix #3
introduce init_pg_table_start, so xen PV could specify the value.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-31 09:55:47 +02:00
Vegard Nossum 575ca7351b x86: fix early-BUG message
The .asciz directive takes any number of strings, but each one is zero-
terminated, and string pasting is not done as in C. That results in only the
first line being output.

Replace .asciz with multiple .ascii directives and terminate with .asciz.

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-30 23:15:34 +02:00
WANG Cong cf9b111c17 x86: remove pointless comments
Remove old comments that include the old arch/i386 directory.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19 19:19:54 +02:00
Eric W. Biederman 700efc1b9f x86: introduce kernel/head32.c
Copy x86_64 and add a head32.c so we can start moving early
architecture initialization out of assembly.

[ Sam Ravnborg <sam@ravnborg.org>: updated it to x86 ]

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:49 +02:00
Jiri Slaby e215f3c2c5 x86: fix fault_msg nul termination
The fault_msg text is not explictly nul terminated now in startup
assembly. Do so by converting .ascii to .asciz.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-03-21 17:06:15 +01:00
Adrian Bunk ed2b7e2b1d x86: don't make swapper_pg_pmd global
There doesn't seem to be any reason for swapper_pg_pmd being global.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-26 12:55:58 +01:00
Adrian Bunk aa65af3f92 x86: don't make swapper_pg_fixmap global
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: hpa@zytor.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-19 16:18:29 +01:00
Ian Campbell 551889a6e2 x86: construct 32-bit boot time page tables in native format.
Specifically the boot time page tables in a CONFIG_X86_PAE=y enabled
kernel are in PAE format.

early_ioremap is updated to use the standard page table accessors.

Clear any mappings beyond max_low_pfn from the boot page tables in
native_pagetable_setup_start because the initial mappings can extend
beyond the range of physical memory and into the vmalloc area.

Derived from patches by Eric Biederman and H. Peter Anvin.

[ jeremy@goop.org: PAE swapper_pg_dir needs to be page-sized fix ]

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09 23:24:09 +01:00
Sam Ravnborg 8b2f7ffffe x86: fix Section mismatch: reference to .init.text:lguest_entry
fix:

> WARNING: vmlinux.o(.data+0x4): Section mismatch: reference to .init.text:lguest_entry (between 'subarch_entries' and 'stack_start')

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:28 +01:00
Ian Campbell 5756dd59f1 x86_32: always run the full set of paging state.
I am preparing to convert the boot time page table to the kernels
native format.  To achieve that I need to enable PAE. Enabling PSE
and the no execute bit would not hurt.  So this patch modifies
the boot cpu path to execute all of the kernels enable code
if and only if we have the proper bits set in mmu_cr4_features.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:27 +01:00
Ian Campbell 503595010f x86_32: remove unnecessary use of %ebx as the boot cpu flag
Currently in head_32.S there are two ways we test to see if we
are the boot cpu.  By looking at %ebx and by looking at the
static variable ready.  When changing things around I have
found that it gets tricky to preserve %ebx.  So this
patch just switches head.S over to the more reliable
test of always using ready.

Hopefully later we can kill these tests entirely.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:27 +01:00
Ingo Molnar 94878efdd0 x86: early fault debugging improvement
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:09 +01:00
Rusty Russell 476c6c11a9 fix lguest rmmod "bad pgd"
After 17d57a9206 ("x86: fix x86-32 early
fixmap initialization.") removing lg.ko caused a printk from vunmap:

	mm/memory.c:115: bad pgd 004b3027.

On the second use after module load, the kernel crashes.

This fixes the immediate problem (accessed and dirty bits not set as
expected in pmd_none_or_clear_bad).  I can't see why this would cause
a crash, but I haven't been able to reproduce it once this is applied.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-01 11:30:35 -08:00
Eric W. Biederman 17d57a9206 x86: fix x86-32 early fixmap initialization.
pageexec@freemail.hu writes:

> i've just noticed that the chunk in i386/kernel/head.S ended up in a
> weird place, namely, it's not going to be executed as it's just after
> a 'jmp 3f' and before startup_32_smp, probably not what you intended.
> on a sidenote, the whole thing can be done in a single insn, like:
>
> movl $(swapper_pg_pmd - __PAGE_OFFSET + 0x067), (swapper_pg_dir -
> __PAGE_OFFSET+ 4092)

Thanks for the reminder I thought we had fixed this problem a while ago.

Needed to get fixed virtual address for USB debug and earlycon with mmio.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-03 17:17:10 +01:00
H. Peter Anvin fa76dab935 x86: clean up setup.h and the boot code
Make <asm/setup.h> usable by the boot code.

Clean up vestiges of the old command-line protocol from setup.h and
head_32.S (it is still supported from the boot loader point of
view, since it is converted to the new command-line protocol by the
boot code.)

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23 22:37:25 +02:00
Rusty Russell a24e785111 i386: paravirt boot sequence
This patch uses the updated boot protocol to do paravirtualized boot.
If the boot version is >= 2.07, then it will do two things:

 1. Check the bootparams loadflags to see if we should reload the
    segment registers and clear interrupts.  This is appropriate
    for normal native boot and some paravirtualized environments, but
    inapproprate for others.

 2. Check the hardware architecture, and dispatch to the appropriate
    kernel entrypoint.  If the bootloader doesn't set this, then we
    simply do the normal boot sequence.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 08:13:17 -07:00
Ingo Molnar 382f64ab8f i386: print better early fault info
improve early fault output.

old format:

 Int 14: CR2 010001e3  err 00000002  EIP c011f2f9  CS 00000060  flags 00010046
 Stack: c073695e c0791c10 00000000 ffffffff 00000000 01000000 00001000 c0791c10

new format:

 BUG: Int 14: CR2 010001e3
      EDI c1000000  ESI c0693c10  EBP c0637f9c  ESP c0637f08
      EBX 00000000  EDX 0000000e  ECX 00000000  EAX 010001e3
      err 00000002  EIP c0123119   CS 00000060  flg 00010046
 Stack: c064d589 c0693000 00000000 c0637f60 00c001e3 01000000 00038000 00000163
        00000000 00000163 00000000 ffffffff 00038000 00000000 00000000 00001000
        00001000 00000000 c0637f88 c06509be c0a2ae60 00001000 00001000 00000000

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17 20:16:56 +02:00
Ingo Molnar 1e3e19723e x86: prepare page allocator for high allocations on PAGEALLOC=y
To preserve the DMA pool in CONFIG_DEBUG_PAGEALLOC=y kernels, we'll
allocate pagetables from above the 16MB DMA limit, so we'll have to set
up boot pagetables to cover 16MB more RAM (worst-case).

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-17 20:15:38 +02:00
Thomas Gleixner 9a163ed8e0 i386: move kernel
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:17:01 +02:00