if tstats of a device is not allocated, this device is not
registered correctly and can not be used.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
cls_u32.c misuses refcounts for struct tc_u_hnode - it counts references
via ->hlist and via ->tp_root together. u32_destroy() drops the former
and, in case when there had been links, leaves the sucker on the list.
As the result, there's nothing to protect it from getting freed once links
are dropped.
That also makes the "is it busy" check incapable of catching the root
hnode - it *is* busy (there's a reference from tp), but we don't see it as
something separate. "Is it our root?" check partially covers that, but
the problem exists for others' roots as well.
AFAICS, the minimal fix preserving the existing behaviour (where it doesn't
include oopsen, that is) would be this:
* count tp->root and tp_c->hlist as separate references. I.e.
have u32_init() set refcount to 2, not 1.
* in u32_destroy() we always drop the former;
in u32_destroy_hnode() - the latter.
That way we have *all* references contributing to refcount. List
removal happens in u32_destroy_hnode() (called only when ->refcnt is 1)
an in u32_destroy() in case of tc_u_common going away, along with
everything reachable from it. IOW, that way we know that
u32_destroy_key() won't free something still on the list (or pointed to by
someone's ->root).
Reproducer:
tc qdisc add dev eth0 ingress
tc filter add dev eth0 parent ffff: protocol ip prio 100 handle 1: \
u32 divisor 1
tc filter add dev eth0 parent ffff: protocol ip prio 200 handle 2: \
u32 divisor 1
tc filter add dev eth0 parent ffff: protocol ip prio 100 \
handle 1:0:11 u32 ht 1: link 801: offset at 0 mask 0f00 shift 6 \
plus 0 eat match ip protocol 6 ff
tc filter delete dev eth0 parent ffff: protocol ip prio 200
tc filter change dev eth0 parent ffff: protocol ip prio 100 \
handle 1:0:11 u32 ht 1: link 0: offset at 0 mask 0f00 shift 6 plus 0 \
eat match ip protocol 6 ff
tc filter delete dev eth0 parent ffff: protocol ip prio 100
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix 5 warnings and 14 checks issued by checkpatch.pl:
CHECK: Logical continuations should be on the previous line
+ if ((q->vars.qdelay < q->params.target / 2)
+ && (q->vars.prob < MAX_PROB / 5))
WARNING: line over 80 characters
+ q->params.tupdate = usecs_to_jiffies(nla_get_u32(tb[TCA_PIE_TUPDATE]));
CHECK: Blank lines aren't necessary after an open brace '{'
+{
+
CHECK: braces {} should be used on all arms of this statement
+ if (qlen < QUEUE_THRESHOLD)
[...]
+ else {
[...]
CHECK: Unbalanced braces around else statement
+ else {
CHECK: No space is necessary after a cast
+ if (delta > (s32) (MAX_PROB / (100 / 2)) &&
CHECK: Unnecessary parentheses around 'qdelay == 0'
+ if ((qdelay == 0) && (qdelay_old == 0) && update_prob)
CHECK: Unnecessary parentheses around 'qdelay_old == 0'
+ if ((qdelay == 0) && (qdelay_old == 0) && update_prob)
CHECK: Unnecessary parentheses around 'q->vars.prob == 0'
+ if ((q->vars.qdelay < q->params.target / 2) &&
+ (q->vars.qdelay_old < q->params.target / 2) &&
+ (q->vars.prob == 0) &&
+ (q->vars.avg_dq_rate > 0))
CHECK: Unnecessary parentheses around 'q->vars.avg_dq_rate > 0'
+ if ((q->vars.qdelay < q->params.target / 2) &&
+ (q->vars.qdelay_old < q->params.target / 2) &&
+ (q->vars.prob == 0) &&
+ (q->vars.avg_dq_rate > 0))
CHECK: Blank lines aren't necessary before a close brace '}'
+
+}
CHECK: Comparison to NULL could be written "!opts"
+ if (opts == NULL)
CHECK: No space is necessary after a cast
+ ((u32) PSCHED_TICKS2NS(q->params.target)) /
WARNING: line over 80 characters
+ nla_put_u32(skb, TCA_PIE_TUPDATE, jiffies_to_usecs(q->params.tupdate)) ||
CHECK: Blank lines aren't necessary before a close brace '}'
+
+}
CHECK: No space is necessary after a cast
+ .delay = ((u32) PSCHED_TICKS2NS(q->vars.qdelay)) /
WARNING: Missing a blank line after declarations
+ struct sk_buff *skb;
+ skb = qdisc_dequeue_head(sch);
WARNING: Missing a blank line after declarations
+ struct pie_sched_data *q = qdisc_priv(sch);
+ qdisc_reset_queue(sch);
WARNING: Missing a blank line after declarations
+ struct pie_sched_data *q = qdisc_priv(sch);
+ q->params.tupdate = 0;
Signed-off-by: Leslie Monis <lesliemonis@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 2276f58ac5 ("udp: use a separate rx queue for packet reception")
turned static inline __skb_recv_udp() from being a trivial helper around
__skb_recv_datagram() into a UDP specific implementaion, making it
EXPORT_SYMBOL_GPL() at the same time.
There are external modules that got broken by __skb_recv_udp() not being
visible to them. Let's unbreak them by making __skb_recv_udp EXPORT_SYMBOL().
Rationale (one of those) why this is actually "technically correct" thing
to do: __skb_recv_udp() used to be an inline wrapper around
__skb_recv_datagram(), which itself (still, and correctly so, I believe)
is EXPORT_SYMBOL().
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Fixes: 2276f58ac5 ("udp: use a separate rx queue for packet reception")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
As done treewide earlier, this catches several more open-coded
allocation size calculations that were added to the kernel during the
merge window. This performs the following mechanical transformations
using Coccinelle:
kvmalloc(a * b, ...) -> kvmalloc_array(a, b, ...)
kvzalloc(a * b, ...) -> kvcalloc(a, b, ...)
devm_kzalloc(..., a * b, ...) -> devm_kcalloc(..., a, b, ...)
Signed-off-by: Kees Cook <keescook@chromium.org>
This patch adds OEM commands and response handling. It also defines OEM
command and response structure as per NCSI specification along with its
handlers.
ncsi_cmd_handler_oem: This is a generic command request handler for OEM
commands
ncsi_rsp_handler_oem: This is a generic response handler for OEM commands
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Reviewed-by: Justin Lee <justin.lee1@dell.com>
Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
move_addr_to_kernel() returns only negative values on error, or zero on
success. Rewrite the error check to an idiomatic form to avoid confusing
the reader.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A number of TC attributes are processed without proper validation
(e.g., length checks). Add a tca policy for all input attributes and use
when invoking nlmsg_parse.
The 2 Fixes tags below cover the latest additions. The other attributes
are a string (KIND), nested attribute (OPTIONS which does seem to have
validation in most cases), for dumps only or a flag.
Fixes: 5bc1701881 ("net: sched: introduce multichain support for filters")
Fixes: d47a6b0e7c ("net: sched: introduce ingress/egress block index attributes for qdisc")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, rtnl_fdb_dump() assumes the family header is 'struct ifinfomsg',
which is not always true -- 'struct ndmsg' is used by iproute2 ('ip neigh').
The problem is, the function bails out early if nlmsg_parse() fails, which
does occur for iproute2 usage of 'struct ndmsg' because the payload length
is shorter than the family header alone (as 'struct ifinfomsg' is assumed).
This breaks backward compatibility with userspace -- nothing is sent back.
Some examples with iproute2 and netlink library for go [1]:
1) $ bridge fdb show
33:33:00:00:00:01 dev ens3 self permanent
01:00:5e:00:00:01 dev ens3 self permanent
33:33:ff:15:98:30 dev ens3 self permanent
This one works, as it uses 'struct ifinfomsg'.
fdb_show() @ iproute2/bridge/fdb.c
"""
.n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
...
if (rtnl_dump_request(&rth, RTM_GETNEIGH, [...]
"""
2) $ ip --family bridge neigh
RTNETLINK answers: Invalid argument
Dump terminated
This one fails, as it uses 'struct ndmsg'.
do_show_or_flush() @ iproute2/ip/ipneigh.c
"""
.n.nlmsg_type = RTM_GETNEIGH,
.n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ndmsg)),
"""
3) $ ./neighlist
< no output >
This one fails, as it uses 'struct ndmsg'-based.
neighList() @ netlink/neigh_linux.go
"""
req := h.newNetlinkRequest(unix.RTM_GETNEIGH, [...]
msg := Ndmsg{
"""
The actual breakage was introduced by commit 0ff50e83b5 ("net: rtnetlink:
bail out from rtnl_fdb_dump() on parse error"), because nlmsg_parse() fails
if the payload length (with the _actual_ family header) is less than the
family header length alone (which is assumed, in parameter 'hdrlen').
This is true in the examples above with struct ndmsg, with size and payload
length shorter than struct ifinfomsg.
However, that commit just intends to fix something under the assumption the
family header is indeed an 'struct ifinfomsg' - by preventing access to the
payload as such (via 'ifm' pointer) if the payload length is not sufficient
to actually contain it.
The assumption was introduced by commit 5e6d243587 ("bridge: netlink dump
interface at par with brctl"), to support iproute2's 'bridge fdb' command
(not 'ip neigh') which indeed uses 'struct ifinfomsg', thus is not broken.
So, in order to unbreak the 'struct ndmsg' family headers and still allow
'struct ifinfomsg' to continue to work, check for the known message sizes
used with 'struct ndmsg' in iproute2 (with zero or one attribute which is
not used in this function anyway) then do not parse the data as ifinfomsg.
Same examples with this patch applied (or revert/before the original fix):
$ bridge fdb show
33:33:00:00:00:01 dev ens3 self permanent
01:00:5e:00:00:01 dev ens3 self permanent
33:33:ff:15:98:30 dev ens3 self permanent
$ ip --family bridge neigh
dev ens3 lladdr 33:33:00:00:00:01 PERMANENT
dev ens3 lladdr 01:00:5e:00:00:01 PERMANENT
dev ens3 lladdr 33:33:ff:15:98:30 PERMANENT
$ ./neighlist
netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0x0, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}
netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x1, 0x0, 0x5e, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}
netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0xff, 0x15, 0x98, 0x30}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0}
Tested on mainline (v4.19-rc6) and net-next (3bd09b05b0).
References:
[1] netlink library for go (test-case)
https://github.com/vishvananda/netlink
$ cat ~/go/src/neighlist/main.go
package main
import ("fmt"; "syscall"; "github.com/vishvananda/netlink")
func main() {
neighs, _ := netlink.NeighList(0, syscall.AF_BRIDGE)
for _, neigh := range neighs { fmt.Printf("%#v\n", neigh) }
}
$ export GOPATH=~/go
$ go get github.com/vishvananda/netlink
$ go build neighlist
$ ~/go/src/neighlist/neighlist
Thanks to David Ahern for suggestions to improve this patch.
Fixes: 0ff50e83b5 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error")
Fixes: 5e6d243587 ("bridge: netlink dump interface at par with brctl")
Reported-by: Aidan Obley <aobley@pivotal.io>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case ip_fib_metrics_init() returns an error, we better
rewrite rt->fib6_metrics with &dst_default_metrics so that
we do not crash later in ip_fib_metrics_put()
Fixes: 767a221753 ("net: common metrics init helper for FIB entries")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid the socket lookup cost in udp_gro_receive if no socket has a
udp tunnel callback configured.
udp_sk(sk)->gro_receive requires a registration with
setup_udp_tunnel_sock, which enables the static key.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following Sparse warnings:
net/bpfilter/bpfilter_kern.c:62:21: warning: cast removes address space
of expression
net/bpfilter/bpfilter_kern.c:101:49: warning: Using plain integer as
NULL pointer
Signed-off-by: Shanthosh RK <shanthosh.rk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the rxrpc_data_ready() function to pick up all packets and to not miss
any. There are two problems:
(1) The sk_data_ready pointer on the UDP socket is set *after* it is
bound. This means that it's open for business before we're ready to
dequeue packets and there's a tiny window exists in which a packet can
sneak onto the receive queue, but we never know about it.
Fix this by setting the pointers on the socket prior to binding it.
(2) skb_recv_udp() will return an error (such as ENETUNREACH) if there was
an error on the transmission side, even though we set the
sk_error_report hook. Because rxrpc_data_ready() returns immediately
in such a case, it never actually removes its packet from the receive
queue.
Fix this by abstracting out the UDP dequeuing and checksumming into a
separate function that keeps hammering on skb_recv_udp() until it
returns -EAGAIN, passing the packets extracted to the remainder of the
function.
and two potential problems:
(3) It might be possible in some circumstances or in the future for
packets to be being added to the UDP receive queue whilst rxrpc is
running consuming them, so the data_ready() handler might get called
less often than once per packet.
Allow for this by fully draining the queue on each call as (2).
(4) If a packet fails the checksum check, the code currently returns after
discarding the packet without checking for more.
Allow for this by fully draining the queue on each call as (2).
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Fix some refs to init_net that should've been changed to the appropriate
network namespace.
Fixes: 2baec2c3f8 ("rxrpc: Support network namespacing")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
In commit ec3ed293e7 ("net_sched: change tcf_del_walker() to take idrinfo->lock")
we move fl_hw_destroy_tmplt() to a workqueue to avoid blocking
with the spinlock held. Unfortunately, this causes a lot of
troubles here:
1. tcf_chain_destroy() could be called right after we queue the work
but before the work runs. This is a use-after-free.
2. The chain refcnt is already 0, we can't even just hold it again.
We can check refcnt==1 but it is ugly.
3. The chain with refcnt 0 is still visible in its block, which means
it could be still found and used!
4. The block has a refcnt too, we can't hold it without introducing a
proper API either.
We can make it working but the end result is ugly. Instead of wasting
time on reviewing it, let's just convert the troubling spinlock to
a mutex, which allows us to use non-atomic allocations too.
Fixes: ec3ed293e7 ("net_sched: change tcf_del_walker() to take idrinfo->lock")
Reported-by: Ido Schimmel <idosch@idosch.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we now do not allow ethtool to deactivate the queue id we are
running an AF_XDP socket on, we can simplify the implementation of
xdp_clear_umem_at_qid().
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We already check the RSS indirection table does not use queues which
would be disabled by channel reconfiguration. Make sure user does not
try to disable queues which have a UMEM and zero-copy AF_XDP socket
installed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
ethtool_set_channels() validates the config against driver's max
settings. It retrieves the current config and stores it in a
variable called max. This was okay when only max settings were
accessed but we will soon want to access current settings as
well, so calling the entire structure max makes the code less
readable.
While at it drop unnecessary parenthesis.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Previously, the xsk code did not record which umem was bound to a
specific queue id. This was not required if all drivers were zero-copy
enabled as this had to be recorded in the driver anyway. So if a user
tried to bind two umems to the same queue, the driver would say
no. But if copy-mode was first enabled and then zero-copy mode (or the
reverse order), we mistakenly enabled both of them on the same umem
leading to buggy behavior. The main culprit for this is that we did
not store the association of umem to queue id in the copy case and
only relied on the driver reporting this. As this relation was not
stored in the driver for copy mode (it does not rely on the AF_XDP
NDOs), this obviously could not work.
This patch fixes the problem by always recording the umem to queue id
relationship in the netdev_queue and netdev_rx_queue structs. This way
we always know what kind of umem has been bound to a queue id and can
act appropriately at bind time.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Move the attribute parsing from neigh_dump_table to neigh_dump_info, and
pass the filter arguments down to neigh_dump_table in a new struct. Add
the filter option to proxy neigh dumps as well to make them consistent.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we use raw socket as the vhost backend, a packet from virito with
gso offloading information, cannot be sent out in later validaton at
xmit path, as we did not set correct skb->protocol which is further used
for looking up the gso function.
To fix this, we set this field according to virito hdr information.
Fixes: e858fae2b0 ("virtio_net: use common code for virtio_net_hdr and skb GSO conversion")
Signed-off-by: Jianfeng Tan <jianfeng.tan@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the refcounting and potential free of dst metrics associated
for ipv4 and ipv6 to a common helper.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipv4 and ipv6 both use refcounted metrics if FIB entries have metrics set.
Move the common initialization code to a helper and use for both protocols.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the refcounting and potential free of dst metrics associated
with a fib entry to a helper and use it in both ipv4 and ipv6.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Consolidate initialization of ipv4 and ipv6 metrics when fib entries
are created into a single helper, ip_fib_metrics_init, that handles
the call to ip_metrics_convert.
If no metrics are defined for the fib entry, then the metrics is set
to dst_default_metrics.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Load the respective NAT helper module if the flow uses it.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
msix_vec_per_pf_min - This param sets the number of minimal MSIX
vectors required for the device initialization. This value is set
in the device which limits MSIX vectors per PF.
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
msix_vec_per_pf_max - This param sets the number of MSIX vectors
that the device requests from the host on driver initialization.
This value is set in the device which is applicable per PF.
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ignore_ari - Device ignores ARI(Alternate Routing ID) capability,
even when platforms has the support and creates same number of
partitions when platform does not support ARI capability.
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* fix use-after-free in regulatory code
* fix rx-mgmt key flag in AP mode (mac80211)
* fix wireless extensions compat code memory leak
-----BEGIN PGP SIGNATURE-----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=QyWK
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2018-10-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just three small fixes:
* fix use-after-free in regulatory code
* fix rx-mgmt key flag in AP mode (mac80211)
* fix wireless extensions compat code memory leak
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
mlx5 core driver and ethernet netdev updates, please note there is a small
devlink releated update to allow extack argument to eswitch operations.
From Eli Britstein,
1) devlink: Add extack argument to the eswitch related operations
2) net/mlx5e: E-Switch, return extack messages for failures in the e-switch devlink callbacks
3) net/mlx5e: Add extack messages for TC offload failures
From Eran Ben Elisha,
4) mlx5e: Add counter for aRFS rule insertion failures
From Feras Daoud
5) Fast teardown support for mlx5 device
This change introduces the enhanced version of the "Force teardown" that
allows SW to perform teardown in a faster way without the need to reclaim
all the FW pages.
Fast teardown provides the following advantages:
1- Fix a FW race condition that could cause command timeout
2- Avoid moving to polling mode
3- Close the vport to prevent PCI ACK to be sent without been scatter
to memory
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbtU45AAoJEEg/ir3gV/o+/C4H/RHA4KImrb476EdB3VNYMqAN
dgXb+bmh6sZP+jHWqQ4c3aVeh6/T8qm4gwiSn2nVTtHEnxtCdIYljzDC1Nswczeg
pSjD1eOP7M1LpAOmBb8xdnJcX7yM7r1bTklnp2sN853WShbsDRYgZBHsBwTzx25U
ZdzL4QTLuohlG/aLrbGXMntIy45ya2fVQrnK54s18nFlgsdFjEs0mi0xaUKNBC6+
P8CTohHAxuuxmL5b+6MIYLZCdgd8cLNQFdtqbckEVw7SvcRTxfraRlyqJ0YOgTGB
TdSWnqZz2JYH29wSFbpFG8qX6GCv8FoiZ+fKzldbolHk442rrktHv3+Y7qQuZVs=
=NVks
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2018-10-03' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2018-10-03
mlx5 core driver and ethernet netdev updates, please note there is a small
devlink releated update to allow extack argument to eswitch operations.
From Eli Britstein,
1) devlink: Add extack argument to the eswitch related operations
2) net/mlx5e: E-Switch, return extack messages for failures in the e-switch devlink callbacks
3) net/mlx5e: Add extack messages for TC offload failures
From Eran Ben Elisha,
4) mlx5e: Add counter for aRFS rule insertion failures
From Feras Daoud
5) Fast teardown support for mlx5 device
This change introduces the enhanced version of the "Force teardown" that
allows SW to perform teardown in a faster way without the need to reclaim
all the FW pages.
Fast teardown provides the following advantages:
1- Fix a FW race condition that could cause command timeout
2- Avoid moving to polling mode
3- Close the vport to prevent PCI ACK to be sent without been scatter
to memory
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=b6yx
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-next-20181004' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Development
Here are some development patches for AF_RXRPC. The most significant points
are:
(1) Change the tracepoint that indicates a packet has been transmitted
into one that indicates a packet is about to be transmitted. Without
this, the response tracepoint may occur first if the round trip is
fast enough.
(2) Sort out AFS address list handling to better enforce maximum capacity
to use helper functions to fill them and to do an insertion sort to
order them. This is here to make (3) easier.
(3) Keep AF_INET addresses as AF_INET addresses rather than converting
them to AF_INET6 in both AF_RXRPC and kAFS. I hadn't realised that a
UDP6 socket would just call down into UDP4 if given an AF_INET
address.
(4) Allow the timestamp on the first DATA packet of a reply to be
retrieved by a kernel service. This will give the kAFS a more
accurate base from which to calculate the callback promise expiration.
(5) Allow the rxrpc protocol epoch value to be retrieved from an incoming
call. This will allow kAFS to determine if the fileserver restarted
and if two addresses apparently assigned to the same fileserver
actually are different boxes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the DNS resolver to retrieve a set of servers and their associated
addresses, ports, preference and weight ratings.
In terms of communication with userspace, "srv=1" is added to the callout
string (the '1' indicating the maximum data version supported by the
kernel) to ask the userspace side for this.
If the userspace side doesn't recognise it, it will ignore the option and
return the usual text address list.
If the userspace side does recognise it, it will return some binary data
that begins with a zero byte that would cause the string parsers to give an
error. The second byte contains the version of the data in the blob (this
may be between 1 and the version specified in the callout data). The
remainder of the payload is version-specific.
In version 1, the payload looks like (note that this is packed):
u8 Non-string marker (ie. 0)
u8 Content (0 => Server list)
u8 Version (ie. 1)
u8 Source (eg. DNS_RECORD_FROM_DNS_SRV)
u8 Status (eg. DNS_LOOKUP_GOOD)
u8 Number of servers
foreach-server {
u16 Name length (LE)
u16 Priority (as per SRV record) (LE)
u16 Weight (as per SRV record) (LE)
u16 Port (LE)
u8 Source (eg. DNS_RECORD_FROM_NSS)
u8 Status (eg. DNS_LOOKUP_GOT_NOT_FOUND)
u8 Protocol (eg. DNS_SERVER_PROTOCOL_UDP)
u8 Number of addresses
char[] Name (not NUL-terminated)
foreach-address {
u8 Family (AF_INET{,6})
union {
u8[4] ipv4_addr
u8[16] ipv6_addr
}
}
}
This can then be used to fetch a whole cell's VL-server configuration for
AFS, for example.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the epoch value to be queried on a server connection. This is in the
rxrpc header of every packet for use in routing and is derived from the
client's state. It's also not supposed to change unless the client gets
restarted.
AFS can make use of this information to deduce whether a fileserver has
been restarted because the fileserver makes client calls to the filesystem
driver's cache manager to send notifications (ie. callback breaks) about
conflicting changes from other clients. These convey the fileserver's own
epoch value back to the filesystem.
Signed-off-by: David Howells <dhowells@redhat.com>
Allow the timestamp on the sk_buff holding the first DATA packet of a reply
to be queried. This can then be used as a base for the expiry time
calculation on the callback promise duration indicated by an operation
result.
Signed-off-by: David Howells <dhowells@redhat.com>
Stephen Rothwell reports the following link failure with IPv6 as module:
x86_64-linux-gnu-ld: net/core/filter.o: in function `sk_lookup':
(.text+0x19219): undefined reference to `__udp6_lib_lookup'
Fix the build by only enabling the IPv6 socket lookup if IPv6 support is
compiled into the kernel.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
rxrpc_extract_addr_from_skb() doesn't use the argument that points to the
local endpoint, so remove the argument.
Signed-off-by: David Howells <dhowells@redhat.com>
AF_RXRPC opens an IPv6 socket through which to send and receive network
packets, both IPv6 and IPv4. It currently turns AF_INET addresses into
AF_INET-as-AF_INET6 addresses based on an assumption that this was
necessary; on further inspection of the code, however, it turns out that
the IPv6 code just farms packets aimed at AF_INET addresses out to the IPv4
code.
Fix AF_RXRPC to use AF_INET addresses directly when given them.
Fixes: 7b674e390e ("rxrpc: Fix IPv6 support")
Signed-off-by: David Howells <dhowells@redhat.com>
Print the data Tx trace line before transmitting so that it appears before
the trace lines indicating success or failure of the transmission. This
makes the trace log less confusing.
Signed-off-by: David Howells <dhowells@redhat.com>
rxrpc_lose_skb() is now exactly the same as rxrpc_free_skb(), so remove it
and use the latter instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net'
overlapped the renaming of a netlink attribute in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
Add extack argument to the eswitch related operations.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Replace "fallthru" with a proper "fall through" annotation.
This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A major flaw of the current xt_quota module is that quota in a specific
rule gets reset every time there is a rule change in the same table. It
makes the xt_quota module not very useful in a table in which iptables
rules are changed at run time. This fix introduces a new counter that is
visible to userspace as the remaining quota of the current rule. When
userspace restores the rules in a table, it can restore the counter to
the remaining quota instead of resetting it to the full quota.
Signed-off-by: Chenbo Feng <fengc@google.com>
Suggested-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Presently, for non-zero copy case, separate pages are allocated for
storing plaintext and encrypted text of records. These pages are stored
in sg_plaintext_data and sg_encrypted_data scatterlists inside record
structure. Further, sg_plaintext_data & sg_encrypted_data are passed
to cryptoapis for record encryption. Allocating separate pages for
plaintext and encrypted text is inefficient from both required memory
and performance point of view.
This patch adds support of inplace encryption of records. For non-zero
copy case, we reuse the pages from sg_encrypted_data scatterlist to
copy the application's plaintext data. For the movement of pages from
sg_encrypted_data to sg_plaintext_data scatterlists, we introduce a new
function move_to_plaintext_sg(). This function add pages into
sg_plaintext_data from sg_encrypted_data scatterlists.
tls_do_encryption() is modified to pass the same scatterlist as both
source and destination into aead_request_set_crypt() if inplace crypto
has been enabled. A new ariable 'inplace_crypto' has been introduced in
record structure to signify whether the same scatterlist can be used.
By default, the inplace_crypto is enabled in get_rec(). If zero-copy is
used (i.e. plaintext data is not copied), inplace_crypto is set to '0'.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Reviewed-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2018-09-30
Here's the first bluetooth-next pull request for the 4.20 kernel.
- Fixes & cleanups to hci_qca driver
- NULL dereference fix to debugfs
- Improved L2CAP Connection-oriented Channel MTU & MPS handling
- Added support for USB-based RTL8822C controller
- Added device ID for BCM4335C0 UART-based controller
- Various other smaller cleanups & fixes
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Caching ip_hdr(skb) before a call to pskb_may_pull() is buggy,
do not do it.
Fixes: 2efd4fca70 ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code to obtain the correct table for the incoming interface was
missing for IPv6. This has been added along with the table creation
notification to fib rules for the RTNL_FAMILY_IP6MR address family.
Signed-off-by: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is useful to be able to use the same socket for listening in a
specific VRF, as for sending multicast packets out of a specific
interface. However, the bound device on the socket currently takes
precedence and results in the packets not being sent.
Relax the condition on overriding the output interface to use for
sending packets out of UDP, raw and ping sockets to allow multicast
packets to be sent using the specified multicast interface.
Signed-off-by: Robert Shearman <rshearma@vyatta.att-mail.com>
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 13cefad2f2 ("net: bridge: convert and rename mcast disabled")
converted the 'multicast_disabled' field to an option bit named
'BROPT_MULTICAST_ENABLED'.
While the old field was implicitly initialized to 0, the new field is
not initialized, resulting in the bridge defaulting to multicast
disabled state and breaking existing applications.
Fix this by explicitly initializing the option.
Fixes: 13cefad2f2 ("net: bridge: convert and rename mcast disabled")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzkaller was able to hit the WARN_ON(sock_owned_by_user(sk));
in tcp_close()
While a socket is being closed, it is very possible other
threads find it in rtnetlink dump.
tcp_get_info() will acquire the socket lock for a short amount
of time (slow = lock_sock_fast(sk)/unlock_sock_fast(sk, slow);),
enough to trigger the warning.
Fixes: 67db3e4bfb ("tcp: no longer hold ehash lock while calling tcp_get_info()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds new BPF helper functions, bpf_sk_lookup_tcp() and
bpf_sk_lookup_udp() which allows BPF programs to find out if there is a
socket listening on this host, and returns a socket pointer which the
BPF program can then access to determine, for instance, whether to
forward or drop traffic. bpf_sk_lookup_xxx() may take a reference on the
socket, so when a BPF program makes use of this function, it must
subsequently pass the returned pointer into the newly added sk_release()
to return the reference.
By way of example, the following pseudocode would filter inbound
connections at XDP if there is no corresponding service listening for
the traffic:
struct bpf_sock_tuple tuple;
struct bpf_sock_ops *sk;
populate_tuple(ctx, &tuple); // Extract the 5tuple from the packet
sk = bpf_sk_lookup_tcp(ctx, &tuple, sizeof tuple, netns, 0);
if (!sk) {
// Couldn't find a socket listening for this traffic. Drop.
return TC_ACT_SHOT;
}
bpf_sk_release(sk, 0);
return TC_ACT_OK;
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Teach the verifier a little bit about a new type of pointer, a
PTR_TO_SOCKET. This pointer type is accessed from BPF through the
'struct bpf_sock' structure.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(allows for better compiler optimization)
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(allows for better compiler optimization)
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(allows for better compiler optimization)
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(the parameter in question is mark)
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(allows for better compiler optimization)
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(allows for better compiler optimization)
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(allows for better compiler optimization)
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have an impressive number of syzkaller bugs that are linked
to the fact that syzbot was able to create a networking device
with millions of TX (or RX) queues.
Let's limit the number of RX/TX queues to 4096, this really should
cover all known cases.
A separate patch will add various cond_resched() in the loops
handling sysfs entries at device creation and dismantle.
Tested:
lpaa6:~# ip link add gre-4097 numtxqueues 4097 numrxqueues 4097 type ip6gretap
RTNETLINK answers: Invalid argument
lpaa6:~# time ip link add gre-4096 numtxqueues 4096 numrxqueues 4096 type ip6gretap
real 0m0.180s
user 0m0.000s
sys 0m0.107s
Fixes: 76ff5cc919 ("rtnl: allow to specify number of rx and tx queues on device creation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Timer handlers do not imply rcu_read_lock(), so my recent fix
triggered a LOCKDEP warning when SYNACK is retransmit.
Lets add rcu_read_lock()/rcu_read_unlock() pairs around ireq->ireq_opt
usages instead of guessing what is done by callers, since it is
not worth the pain.
Get rid of ireq_opt_deref() helper since it hides the logic
without real benefit, since it is now a standard rcu_dereference().
Fixes: 1ad98e9d1b ("tcp/dccp: fix lockdep issue when SYN is backlogged")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This helper is unused since commit 988cf74deb ("inet:
Stop generating UFO packets.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There were supposed to be two blocks - one for each direction
cfg80211 <-> driver, clean up the code to restore that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There isn't really any need for us to be sending this from
two different places - move cfg80211_init_wdev() later and
send the notification from there, removing it from the non-
netdev case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We currently have two places that do similar things, depending
on whether it's a wdev with or without netdev.
Combine the code to avoid having to duplicate all new additions.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add some error messages to nl80211_parse_chandef() to make
failures here - especially with disabled channels - easier
to diagnose.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no reason for drivers to be able to access the
cfg80211 internal cookie counter; move it out of the
wiphy into the rdev structure.
While at it, also make it never assign 0 as a cookie
(we consider that invalid in some places), and warn if
we manage to do that for some reason (wrapping is not
likely to happen with a u64.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since my change to split out the regulatory init to occur later,
any issues during earlier cfg80211_init() or errors during the
platform device allocation would lead to crashes later. Make this
more robust by checking that the earlier initialization succeeded.
Fixes: d7be102f29 ("cfg80211: initialize regulatory keys/database later")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The variable j will be initialized at trailing step.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211_prepare_wdev_dump() is using the output skb to look up
the network namespace, but this isn't really necessary, it can
just as well use the input skb which is available as cb->skb,
the sk is the same anyway.
Therefore, remove the redundant argument.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow userspace to enable fine timing measurement responder
functionality with configurable lci/civic parameters in AP mode.
This can be done at AP start or changing beacon parameters.
A new EXT_FEATURE flag is introduced for drivers to advertise
the capability.
Also nl80211 API support for retrieving statistics is added.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
[remove unused cfg80211_ftm_responder_params, clarify docs,
move validation into policy]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use the NL80211_KEY_IDX attribute inside the NL80211_ATTR_KEY in
NL80211_CMD_GET_KEY responses to comply with nl80211_key_policy.
This is unlikely to affect existing userspace.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix to return a negative error code -ENOMEM from the kmemdup
error handling case instead of 0.
Fixes: 09b4a4faf9 ("mac80211: introduce capability flags for VHT EXT NSS support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's a bit of duplicated code to initialize a wdev, pull it out
into a separate function to call from both places.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Drivers that do not have the BUFF_MMPDU_TXQ flag set will not have a
TXQ for the special TID = 16.
In this case, the last member in the *struct ieee80211_sta* txq array
will be NULL.
We must check this in order not to get a NULL pointer dereference when
iterating the txq array.
Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The check for !scan_plan is redunant as this has been checked
in the proceeding statement and the code returns -ENOBUFS if
it is true. Remove the redundant check.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The iterator in list_for_each_entry_safe is never null, therefore, remove
the redundant null pointer check.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link dumps can return results from a target namespace. If the namespace id
is invalid, then the dump request should fail if get_target_net fails
rather than continuing with a dump of the current namespace.
Fixes: 79e1ad148c ("rtnetlink: use netnsid to query interface")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 90c7afc96c.
When the commit was merged, the code used nf_ct_put() to free
the entry, but later on commit 76644232e6 ("openvswitch: Free
tmpl with tmpl_free.") replaced that with nf_ct_tmpl_free which
is a more appropriate. Now the original problem is removed.
Then 44d6e2f273 ("net: Replace NF_CT_ASSERT() with WARN_ON().")
replaced a debug assert with a WARN_ON() which is trigged now.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the recent TCP/EDT patch series, I switched TCP and sch_fq
clocks from MONOTONIC to TAI, in order to meet the choice done
earlier for sch_etf packet scheduler.
But sure enough, this broke some setups were the TAI clock
jumps forward (by almost 50 year...), as reported
by Leonard Crestez.
If we want to converge later, we'll probably need to add
an skb field to differentiate the clock bases, or a socket option.
In the meantime, an UDP application will need to use CLOCK_MONOTONIC
base for its SCM_TXTIME timestamps if using fq packet scheduler.
Fixes: 72b0094f91 ("tcp: switch tcp_clock_ns() to CLOCK_TAI base")
Fixes: 142537e419 ("net_sched: sch_fq: switch to CLOCK_TAI")
Fixes: fd2bca2aa7 ("tcp: switch internal pacing timer to CLOCK_TAI")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Leonard Crestez <leonard.crestez@nxp.com>
Tested-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device gro_cells has been initialized, it should be freed,
otherwise it will be leaked
Fixes: f203b76d78 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When tcf_block_find() fails, it already rollbacks the qdisc refcnt,
so its caller doesn't need to clean up this again. Avoid calling
qdisc_put() again by resetting qdisc to NULL for callers.
Reported-by: syzbot+37b8770e6d5a8220a039@syzkaller.appspotmail.com
Fixes: e368fdb61d ("net: sched: use Qdisc rcu API instead of relying on rtnl lock")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth 2018-09-27
Here's one more Bluetooth fix for 4.19, fixing the handling of an
attempt to unpair a device while pairing is in progress.
Let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When SKBs are coalesced, we can have SKBs with different
frag sizes. Some with PAGE_SIZE and some not with PAGE_SIZE.
Since recv_skip_hint is always set to the full SKB size,
it can overestimate the amount that should be read using
normal read for coalesced packets.
Change the recv_skip_hint so that it only includes the first
frags that are not of PAGE_SIZE.
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we have less than PAGE_SIZE of data on receive queue,
we set recv_skip_hint to 0. Instead, set it to the actual
number of bytes available.
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial session number when a link is created is based on a random
value, taken from struct tipc_net->random. It is then incremented for
each link reset to avoid mixing protocol messages from different link
sessions.
However, when a bearer is reset all its links are deleted, and will
later be re-created using the same random value as the first time.
This means that if the link never went down between creation and
deletion we will still sometimes have two subsequent sessions with
the same session number. In virtual environments with potentially
long transmission times this has turned out to be a real problem.
We now fix this by randomizing the session number each time a link
is created.
With a session number size of 16 bits this gives a risk of session
collision of 1/64k. To reduce this further, we also introduce a sanity
check on the very first STATE message arriving at a link. If this has
an acknowledge value differing from 0, which is logically impossible,
we ignore the message. The final risk for session collision is hence
reduced to 1/4G, which should be sufficient.
Signed-off-by: LUU Duc Canh <canh.d.luu@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If "td->u.target_size" is larger than sizeof(struct xt_entry_target) we
return -EINVAL. But we don't check whether it's smaller than
sizeof(struct xt_entry_target) and that could lead to an out of bounds
read.
Fixes: 7ba699c604 ("[NET_SCHED]: Convert actions from rtnetlink to new netlink API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2018-10-01
1) Make xfrmi_get_link_net() static to silence a sparse warning.
From Wei Yongjun.
2) Remove a unused esph pointer definition in esp_input().
From Haishuang Yan.
3) Allow the NIC driver to quietly refuse xfrm offload
in case it does not support it, the SA is created
without offload in this case.
From Shannon Nelson.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2018-10-01
1) Validate address prefix lengths in the xfrm selector,
otherwise we may hit undefined behaviour in the
address matching functions if the prefix is too
big for the given address family.
2) Fix skb leak on local message size errors.
From Thadeu Lima de Souza Cascardo.
3) We currently reset the transport header back to the network
header after a transport mode transformation is applied. This
leads to an incorrect transport header when multiple transport
mode transformations are applied. Reset the transport header
only after all transformations are already applied to fix this.
From Sowmini Varadhan.
4) We only support one offloaded xfrm, so reset crypto_done after
the first transformation in xfrm_input(). Otherwise we may call
the wrong input method for subsequent transformations.
From Sowmini Varadhan.
5) Fix NULL pointer dereference when skb_dst_force clears the dst_entry.
skb_dst_force does not really force a dst refcount anymore, it might
clear it instead. xfrm code did not expect this, add a check to not
dereference skb_dst() if it was cleared by skb_dst_force.
6) Validate xfrm template mode, otherwise we can get a stack-out-of-bounds
read in xfrm_state_find. From Sean Tranchetti.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously receiver buffer auto-tuning starts after receiving
one advertised window amount of data. After the initial receiver
buffer was raised by patch a337531b94 ("tcp: up initial rmem to
128KB and SYN rwin to around 64KB"), the reciver buffer may take
too long to start raising. To address this issue, this patch lowers
the initial bytes expected to receive roughly the expected sender's
initial window.
Fixes: a337531b94 ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In normal SYN processing, packets are handled without listener
lock and in RCU protected ingress path.
But syzkaller is known to be able to trick us and SYN
packets might be processed in process context, after being
queued into socket backlog.
In commit 06f877d613 ("tcp/dccp: fix other lockdep splats
accessing ireq_opt") I made a very stupid fix, that happened
to work mostly because of the regular path being RCU protected.
Really the thing protecting ireq->ireq_opt is RCU read lock,
and the pseudo request refcnt is not relevant.
This patch extends what I did in commit 449809a66c ("tcp/dccp:
block BH for SYN processing") by adding an extra rcu_read_{lock|unlock}
pair in the paths that might be taken when processing SYN from
socket backlog (thus possibly in process context)
Fixes: 06f877d613 ("tcp/dccp: fix other lockdep splats accessing ireq_opt")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree:
1) Skip ip_sabotage_in() for packet making into the VRF driver,
otherwise packets are dropped, from David Ahern.
2) Clang compilation warning uncovering typo in the
nft_validate_register_store() call from nft_osf, from Stefan Agner.
3) Double sizeof netlink message length calculations in ctnetlink,
from zhong jiang.
4) Missing rb_erase() on batch full in rbtree garbage collector,
from Taehee Yoo.
5) Calm down compilation warning in nf_hook(), from Florian Westphal.
6) Missing check for non-null sk in xt_socket before validating
netns procedence, from Flavio Leitner.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to introduce per-cpu cgroup storage, let's generalize
bpf cgroup core to support multiple cgroup storage types.
Potentially, per-node cgroup storage can be added later.
This commit is mostly a formal change that replaces
cgroup_storage pointer with a array of cgroup_storage pointers.
It doesn't actually introduce a new storage type,
it will be done later.
Each bpf program is now able to have one cgroup storage of each type.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
key->sta is only valid after ieee80211_key_link, which is called later
in this function. Because of that, the IEEE80211_KEY_FLAG_RX_MGMT is
never set when management frame protection is enabled.
Fixes: e548c49e6d ("mac80211: add key flag for management keys")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_wext_giwrate and sinfo.pertid might allocate sinfo.pertid via
rdev_get_station(), but never release it. Fix that.
Fixes: 8689c051a2 ("cfg80211: dynamically allocate per-tid stats for station info")
Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com>
[johannes: fix error path, use cfg80211_sinfo_release_content(), add Fixes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We see the following scenario:
1) Link endpoint B on node 1 discovers that its peer endpoint is gone.
Since there is a second working link, failover procedure is started.
2) Link endpoint A on node 1 sends a FAILOVER message to peer endpoint
A on node 2. The node item 1->2 goes to state FAILINGOVER.
3) Linke endpoint A/2 receives the failover, and is supposed to take
down its parallell link endpoint B/2, while producing a FAILOVER
message to send back to A/1.
4) However, B/2 has already been deleted, so no FAILOVER message can
created.
5) Node 1->2 remains in state FAILINGOVER forever, refusing to receive
any messages that can bring B/1 up again. We are left with a non-
redundant link between node 1 and 2.
We fix this with letting endpoint A/2 build a dummy FAILOVER message
to send to back to A/1, so that the situation can be resolved.
Signed-off-by: LUU Duc Canh <canh.d.luu@dektech.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the bug that all datapath and vport ops are returning
wrong values (OVS_FLOW_CMD_NEW or OVS_DP_CMD_NEW) in their replies.
Signed-off-by: Yifeng Sun <pkusunyifeng@gmail.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Structure 'tls_rec' contains sg_aead_in and sg_aead_out which point
to a aad_space and then chain scatterlists sg_plaintext_data,
sg_encrypted_data respectively. Rather than using chained scatterlists
for plaintext and encrypted data in aead_req, it is efficient to store
aad_space in sg_encrypted_data and sg_plaintext_data itself in the
first index and get rid of sg_aead_in, sg_aead_in and further chaining.
This requires increasing size of sg_encrypted_data & sg_plaintext_data
arrarys by 1 to accommodate entry for aad_space. The code which uses
sg_encrypted_data and sg_plaintext_data has been modified to skip first
index as it points to aad_space.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=MDV3
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-fixes-20180928' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fixes
Here are some miscellaneous fixes for AF_RXRPC:
(1) Remove a duplicate variable initialisation.
(2) Fix one of the checks made when we decide to set up a new incoming
service call in which a flag is being checked in the wrong field of
the packet header. This check is abstracted out into helper
functions.
(3) Fix RTT gathering. The code has been trying to make use of socket
timestamps, but wasn't actually enabling them. The code has also been
recording a transmit time for the outgoing packet for which we're
going to measure the RTT after sending the message - but we can get
the incoming packet before we get to that and record a negative RTT.
(4) Fix the emission of BUSY packets (we are emitting ABORTs instead).
(5) Improve error checking on incoming packets.
(6) Try to fix a bug in new service call handling whereby a BUG we should
never be able to reach somehow got triggered. Do this by moving much
of the checking as early as possible and not repeating it later
(depends on (5) above).
(7) Fix the sockopts set on a UDP6 socket to include the ones set on a
UDP4 socket so that we receive UDP4 errors and packet-too-large
notifications too.
(8) Fix the distribution of errors so that we do it at the point of
receiving an error in the UDP callback rather than deferring it
thereby cutting short any transmissions that would otherwise occur in
the window.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Default socket receive buffer size for a listener socket is 2Mb. For
each arriving empty SYN, the linux kernel allocates a 768 bytes buffer.
This means that a listener socket can serve maximum 2700 simultaneous
empty connection setup requests before it hits a receive buffer
overflow, and much fewer if the SYN is carrying any significant
amount of data.
When this happens the setup request is rejected, and the client
receives an ECONNREFUSED error.
This commit mitigates this problem by letting the client socket try to
retransmit the SYN message multiple times when it sees it rejected with
the code TIPC_ERR_OVERLOAD. Retransmission is done at random intervals
in the range of [100 ms, setup_timeout / 4], as many times as there is
room for within the setup timeout limit.
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Messages intended for intitating a connection are currently
indistinguishable from regular datagram messages. The TIPC
protocol specification defines bit 17 in word 0 as a SYN bit
to allow sanity check of such messages in the listening socket,
but this has so far never been implemented.
We do that in this commit.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We refactor the function tipc_sk_filter_connect(), both to make it
more readable and as a preparation for the next commit.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We refactor this function as a preparation for the coming commits in
the same series.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function tipc_msg_reverse() is reversing the header of a message
while reusing the original buffer. We have seen at several occasions
that this may have unfortunate side effects when the buffer to be
reversed is a clone.
In one of the following commits we will again need to reverse cloned
buffers, so this is the right time to permanently eliminate this
problem. In this commit we let the said function always consume the
original buffer and replace it with a new one when applicable.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously TCP initial receive buffer is ~87KB by default and
the initial receive window is ~29KB (20 MSS). This patch changes
the two numbers to 128KB and ~64KB (rounding down to the multiples
of MSS) respectively. The patch also simplifies the calculations s.t.
the two numbers are directly controlled by sysctl tcp_rmem[1]:
1) Initial receiver buffer budget (sk_rcvbuf): while this should
be configured via sysctl tcp_rmem[1], previously tcp_fixup_rcvbuf()
always override and set a larger size when a new connection
establishes.
2) Initial receive window in SYN: previously it is set to 20
packets if MSS <= 1460. The number 20 was based on the initial
congestion window of 10: the receiver needs twice amount to
avoid being limited by the receive window upon out-of-order
delivery in the first window burst. But since this only
applies if the receiving MSS <= 1460, connection using large MTU
(e.g. to utilize receiver zero-copy) may be limited by the
receive window.
With this patch TCP memory configuration is more straight-forward and
more properly sized to modern high-speed networks by default. Several
popular stacks have been announcing 64KB rwin in SYNs as well.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we do no longer require NAPI drivers to provide
an ndo_poll_controller(), napi_schedule() has not been done
before poll_one_napi() invocation.
So testing NAPI_STATE_SCHED is likely to cause early returns.
While we are at it, remove outdated comment.
Note to future bisections : This change might surface prior
bugs in drivers. See commit 73f21c653f ("bnxt_en: Fix TX
timeout during netpoll.") for one occurrence.
Fixes: ac3d9dd034 ("netpoll: make ndo_poll_controller() optional")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Song Liu <songliubraving@fb.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following sparse warning:
net/sched/sch_generic.c:944:6: warning:
symbol 'qdisc_free_cb' was not declared. Should it be static?
Fixes: 3a7d0d07a3 ("net: sched: extend Qdisc with rcu")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to explicitly zero is_sticky when creating a new fdb, otherwise
we might get a stale value for a new entry.
Fixes: 435f2e7cc0 ("net: bridge: add support for sticky fdb entries")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* two new spectre-v1 mitigations in nl80211
* TX status fix in general, and mesh in particular
* powersave vs. offchannel fix
* regulatory initialization fix
* fix for a queue hang due to a bad return value
* allocate TXQs for active monitor interfaces, fixing my
earlier patch to avoid unnecessary allocations where I
missed this case needed them
* fix TDLS data frames priority assignment
* fix scan results processing to take into account duplicate
channel numbers (over different operating classes, but we
don't necessarily know the operating class)
* various hwsim fixes for radio destruction and new radio
announcement messages
* remove an extraneous kernel-doc line
-----BEGIN PGP SIGNATURE-----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=ySdv
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2018-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
More patches than I'd like perhaps, but each seems reasonable:
* two new spectre-v1 mitigations in nl80211
* TX status fix in general, and mesh in particular
* powersave vs. offchannel fix
* regulatory initialization fix
* fix for a queue hang due to a bad return value
* allocate TXQs for active monitor interfaces, fixing my
earlier patch to avoid unnecessary allocations where I
missed this case needed them
* fix TDLS data frames priority assignment
* fix scan results processing to take into account duplicate
channel numbers (over different operating classes, but we
don't necessarily know the operating class)
* various hwsim fixes for radio destruction and new radio
announcement messages
* remove an extraneous kernel-doc line
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following sparse warning:
net/tls/tls_sw.c:655:16: warning:
symbol 'get_rec' was not declared. Should it be static?
Fixes: a42055e8d2 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following sparse warning:
net/core/gen_stats.c:166:1: warning:
symbol '___gnet_stats_copy_basic' was not declared. Should it be static?
Fixes: 5e111210a4 ("net/core: Add new basic hardware counter")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.
Found by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only check for the network namespace if the socket is available.
Fixes: f564650106 ("netfilter: check if the socket netns is correct.")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Internally, rhashtable_lookup_fast() calls rcu_read_lock() then,
calls rhashtable_lookup(). so that in places where are guaranteed
by rcu read lock, rhashtable_lookup() is enough.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_flow_offload_{ip/ipv6}_hook() check nat flag then, call
nf_flow_nat_{ip/ipv6} but that also check nat flag. so that
nat flag check code in nf_flow_offload_{ip/ipv6}_hook() are unnecessary.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add ability to set the connection tracking secmark value.
Add ability to set the meta secmark value.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add the ability to set the security context of packets within the nf_tables framework.
Add a nft_object for holding security contexts in the kernel and manipulating packets on the wire.
Convert the security context strings at rule addition time to security identifiers.
This is the same behavior like in xt_SECMARK and offers better performance than computing it per packet.
Set the maximum security context length to 256.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We configured iptables as below, which only allowed incoming data on
established connections:
iptables -t mangle -A PREROUTING -m state --state ESTABLISHED -j ACCEPT
iptables -t mangle -P PREROUTING DROP
When deleting a secondary address, current masquerade implements would
flush all conntracks on this device. All the established connections on
primary address also be deleted, then subsequent incoming data on the
connections would be dropped wrongly because it was identified as NEW
connection.
So when an address was delete, it should only flush connections related
with the address.
Signed-off-by: Tan Hu <tan.hu@zte.com.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fix error distribution by immediately delivering the errors to all the
affected calls rather than deferring them to a worker thread. The problem
with the latter is that retries and things can happen in the meantime when we
want to stop that sooner.
To this end:
(1) Stop the error distributor from removing calls from the error_targets
list so that peer->lock isn't needed to synchronise against other adds
and removals.
(2) Require the peer's error_targets list to be accessed with RCU, thereby
avoiding the need to take peer->lock over distribution.
(3) Don't attempt to affect a call's state if it is already marked complete.
Signed-off-by: David Howells <dhowells@redhat.com>
It seems that enabling IPV6_RECVERR on an IPv6 socket doesn't also turn on
IP_RECVERR, so neither local errors nor ICMP-transported remote errors from
IPv4 peer addresses are returned to the AF_RXRPC protocol.
Make the sockopt setting code in rxrpc_open_socket() fall through from the
AF_INET6 case to the AF_INET case to turn on all the AF_INET options too in
the AF_INET6 case.
Fixes: f2aeed3a59 ("rxrpc: Fix error reception on AF_INET6 sockets")
Signed-off-by: David Howells <dhowells@redhat.com>
Make the following changes to improve the robustness of the code that sets
up a new service call:
(1) Cache the rxrpc_sock struct obtained in rxrpc_data_ready() to do a
service ID check and pass that along to rxrpc_new_incoming_call().
This means that I can remove the check from rxrpc_new_incoming_call()
without the need to worry about the socket attached to the local
endpoint getting replaced - which would invalidate the check.
(2) Cache the rxrpc_peer struct, thereby allowing the peer search to be
done once. The peer is passed to rxrpc_new_incoming_call(), thereby
saving the need to repeat the search.
This also reduces the possibility of rxrpc_publish_service_conn()
BUG()'ing due to the detection of a duplicate connection, despite the
initial search done by rxrpc_find_connection_rcu() having turned up
nothing.
This BUG() shouldn't ever get hit since rxrpc_data_ready() *should* be
non-reentrant and the result of the initial search should still hold
true, but it has proven possible to hit.
I *think* this may be due to __rxrpc_lookup_peer_rcu() cutting short
the iteration over the hash table if it finds a matching peer with a
zero usage count, but I don't know for sure since it's only ever been
hit once that I know of.
Another possibility is that a bug in rxrpc_data_ready() that checked
the wrong byte in the header for the RXRPC_CLIENT_INITIATED flag
might've let through a packet that caused a spurious and invalid call
to be set up. That is addressed in another patch.
(3) Fix __rxrpc_lookup_peer_rcu() to skip peer records that have a zero
usage count rather than stopping and returning not found, just in case
there's another peer record behind it in the bucket.
(4) Don't search the peer records in rxrpc_alloc_incoming_call(), but
rather either use the peer cached in (2) or, if one wasn't found,
preemptively install a new one.
Fixes: 8496af50eb ("rxrpc: Use RCU to access a peer's service connection tree")
Signed-off-by: David Howells <dhowells@redhat.com>
Do more up-front checking on incoming packets to weed out invalid ones and
also ones aimed at services that we don't support.
Whilst we're at it, replace the clearing of call and skew if we don't find
a connection with just initialising the variables to zero at the top of the
function.
Signed-off-by: David Howells <dhowells@redhat.com>
In the input path, a received sk_buff can be marked for rejection by
setting RXRPC_SKB_MARK_* in skb->mark and, if needed, some auxiliary data
(such as an abort code) in skb->priority. The rejection is handled by
queueing the sk_buff up for dealing with in process context. The output
code reads the mark and priority and, theoretically, generates an
appropriate response packet.
However, if RXRPC_SKB_MARK_BUSY is set, this isn't noticed and an ABORT
message with a random abort code is generated (since skb->priority wasn't
set to anything).
Fix this by outputting the appropriate sort of packet.
Also, whilst we're at it, most of the marks are no longer used, so remove
them and rename the remaining two to something more obvious.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix RTT information gathering in AF_RXRPC by the following means:
(1) Enable Rx timestamping on the transport socket with SO_TIMESTAMPNS.
(2) If the sk_buff doesn't have a timestamp set when rxrpc_data_ready()
collects it, set it at that point.
(3) Allow ACKs to be requested on the last packet of a client call, but
not a service call. We need to be careful lest we undo:
bf7d620abf
Author: David Howells <dhowells@redhat.com>
Date: Thu Oct 6 08:11:51 2016 +0100
rxrpc: Don't request an ACK on the last DATA packet of a call's Tx phase
but that only really applies to service calls that we're handling,
since the client side gets to send the final ACK (or not).
(4) When about to transmit an ACK or DATA packet, record the Tx timestamp
before only; don't update the timestamp afterwards.
(5) Switch the ordering between recording the serial and recording the
timestamp to always set the serial number first. The serial number
shouldn't be seen referenced by an ACK packet until we've transmitted
the packet bearing it - so in the Rx path, we don't need the timestamp
until we've checked the serial number.
Fixes: cf1a6474f8 ("rxrpc: Add per-peer RTT tracker")
Signed-off-by: David Howells <dhowells@redhat.com>
There's a check in rxrpc_data_ready() that's checking the CLIENT_INITIATED
flag in the packet type field rather than in the packet flags field.
Fix this by creating a pair of helper functions to check whether the packet
is going to the client or to the server and use them generally.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
rxrpc_find_connection_rcu() initialises variable k twice with the same
information. Remove one of the initialisations.
Signed-off-by: David Howells <dhowells@redhat.com>
If the remote is not able to fully utilize the MPS choosen recalculate
the credits based on the actual amount it is sending that way it can
still send packets of MTU size without credits dropping to 0.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Give enough rx credits for a full packet instead of using an arbitrary
number which may not be enough depending on the MTU and MPS which can
cause interruptions while waiting for more credits, also remove
debugfs entry for l2cap_le_max_credits.
With these changes the credits are restored after each SDU is received
instead of using fixed threshold, this way it is garanteed that there
will always be enough credits to send a packet without waiting more
credits to arrive.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This ensures the MPS can fit in a single HCI fragment so each
segment don't have to be reassembled at HCI level, in addition to
that also remove the debugfs entry to configure the MPS.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Add the definitions for adding entries to the LE resolve list and
removing entries from the LE resolve list. When the LE resolve list
gets changed via HCI commands make sure that the internal storage of
the resolve list entries gets updated.
Signed-off-by: Ankit Navik <ankit.p.navik@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The barriers are unneeded; wait_woken() and woken_wake_function()
already provide us with the required synchronization: remove them
and document that we're relying on the (implicit) synchronization
provided by wait_woken() and woken_wake_function().
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Use array_index_nospec() to sanitize i with respect to speculation.
Note that the user doesn't control i directly, but can make it out
of bounds by not finding a threshold in the array.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
[add note about user control, as explained by Masashi]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
(the parameters in question are mark and flow_flags)
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
(the parameters in question are mark and flow_flags)
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add flag wol_enabled to struct net_device indicating whether
Wake-on-LAN is enabled. As first user phy_suspend() will use it to
decide whether PHY can be suspended or not.
Fixes: f1e911d5d0 ("r8169: add basic phylib support")
Fixes: e8cfd9d6c7 ("net: phy: call state machine synchronously in phy_stop")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The change to move metrics from the dst to rt6_info moved the call
to ip6_convert_metrics from ip6_route_add to ip6_route_info_create. In
doing so it makes the call in ip6_route_info_append redundant and
actually leaks the metrics installed as part of the ip6_route_info_create.
Remove the now unnecessary call.
Fixes: d4ead6b34b ("net/ipv6: move metrics from dst to rt6_info")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Further reduce the size of net_bridge with 8 bytes and reduce the number of
holes in it:
Before: holes: 5, sum holes: 15
After: holes: 3, sum holes: 7
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the last remaining bool option to a bit thus reducing the overall
net_bridge size further by 8 bytes.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the neigh_suppress_enabled option to a bit.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch converts the rest of the mcast options to bits. It also packs
the mcast options a little better by moving multicast_mld_version to an
existing hole, reducing the net_bridge size by 8 bytes.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert mcast disabled to an option bit and while doing so convert the
logic to check if multicast is enabled instead. That is make the logic
follow the option value - if it's set then mcast is enabled and vice versa.
This avoids a few confusing places where we inverted the value that's being
set to follow the mcast_disabled logic.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert group_addr_set internal bridge opt to a bit.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
No functional change, convert of nf_call_[ip|ip6|arp]tables to bits.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bridge options have usually been added as separate fields all over the
net_bridge struct taking up space and ending up in different cache lines.
Let's move them to a single bitfield to save up space and speedup lookups.
This patch adds a simple API for option modifying and retrieving using
bitops and converts the first user of the API - the bridge vlan options
(vlan_enabled and vlan_stats_enabled).
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we have a mix of opening brackets on new lines and on the same
line, let's move them all on the same line.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch attempts to untangle the TX and RX code in qeth from
af_iucv's respective HiperTransport path:
On the TX side, pointing skb_network_header() at the IUCV header
means that qeth_l3_fill_af_iucv_hdr() no longer needs a magical offset
to access the header.
On the RX side, qeth pulls the (fake) L2 header off the skb like any
normal ethernet driver would. This makes working with the IUCV header
in af_iucv easier, since we no longer have to assume a fixed skb layout.
While at it, replace the open-coded length checks in af_iucv's RX path
with pskb_may_pull().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use array_index_nospec() to sanitize ridx with respect to speculation.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Monitor mode interfaces with the active flag are passed down to the driver.
Drivers using TXQ expect that all interfaces have allocated TXQs before
they get added.
Fixes: 79af1f8661 ("mac80211: avoid allocating TXQs that won't be used")
Cc: stable@vger.kernel.org
Reported-by: Catrinel Catrinescu <cc@80211.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In tipc_link_reset() we copy the wakeup queue to input queue using
skb_queue_splice_init(link->wakeupq, link->inputq).
This is performed without holding any locks. The lists might be
simultaneously be accessed by other cpu threads in tipc_sk_rcv(),
something leading to to random missing packets.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we detect that under lying carrier detects errors and goes down,
we reset the bearer.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: ed842faeb2 ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-09-25
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Allow for RX stack hardening by implementing the kernel's flow
dissector in BPF. Idea was originally presented at netconf 2017 [0].
Quote from merge commit:
[...] Because of the rigorous checks of the BPF verifier, this
provides significant security guarantees. In particular, the BPF
flow dissector cannot get inside of an infinite loop, as with
CVE-2013-4348, because BPF programs are guaranteed to terminate.
It cannot read outside of packet bounds, because all memory accesses
are checked. Also, with BPF the administrator can decide which
protocols to support, reducing potential attack surface. Rarely
encountered protocols can be excluded from dissection and the
program can be updated without kernel recompile or reboot if a
bug is discovered. [...]
Also, a sample flow dissector has been implemented in BPF as part
of this work, from Petar and Willem.
[0] http://vger.kernel.org/netconf2017_files/rx_hardening_and_udp_gso.pdf
2) Add support for bpftool to list currently active attachment
points of BPF networking programs providing a quick overview
similar to bpftool's perf subcommand, from Yonghong.
3) Fix a verifier pruning instability bug where a union member
from the register state was not cleared properly leading to
branches not being pruned despite them being valid candidates,
from Alexei.
4) Various smaller fast-path optimizations in XDP's map redirect
code, from Jesper.
5) Enable to recognize BPF_MAP_TYPE_REUSEPORT_SOCKARRAY maps
in bpftool, from Roman.
6) Remove a duplicate check in libbpf that probes for function
storage, from Taeung.
7) Fix an issue in test_progs by avoid checking for errno since
on success its value should not be checked, from Mauricio.
8) Fix unused variable warning in bpf_getsockopt() helper when
CONFIG_INET is not configured, from Anders.
9) Fix a compilation failure in the BPF sample code's use of
bpf_flow_keys, from Prashant.
10) Minor cleanups in BPF code, from Yue and Zhong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2018-09-25
This series contains updates to i40e and xsk.
Mariusz fixes an issue where the VF link state was not being updated
properly when the PF is down or up. Also cleaned up the promiscuous
configuration during a VF reset.
Patryk simplifies the code a bit to use the variables for PF and HW that
are declared, rather than using the VSI pointers. Cleaned up the
message length parameter to several virtchnl functions, since it was not
being used (or needed).
Harshitha fixes two potential race conditions when trying to change VF
settings by creating a helper function to validate that the VF is
enabled and that the VSI is set up.
Sergey corrects a double "link down" message by putting in a check for
whether or not the link is up or going down.
Björn addresses an AF_XDP zero-copy issue that buffers passed
from userspace to the kernel was leaked when the hardware descriptor
ring was torn down. A zero-copy capable driver picks buffers off the
fill ring and places them on the hardware receive ring to be completed at
a later point when DMA is complete. Similar on the transmit side; The
driver picks buffers off the transmit ring and places them on the
transmit hardware ring.
In the typical flow, the receive buffer will be placed onto an receive
ring (completed to the user), and the transmit buffer will be placed on
the completion ring to notify the user that the transfer is done.
However, if the driver needs to tear down the hardware rings for some
reason (interface goes down, reconfiguration and such), the userspace
buffers cannot be leaked. They have to be reused or completed back to
userspace.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to remove dependency on rtnl lock on rules update path, always
take reference to block while using it on rules update path. Change
tcf_block_get() error handling to properly release block with reference
counting, instead of just destroying it, in order to accommodate potential
concurrent users.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement get/put function for blocks that only take/release the reference
and perform deallocation. These functions are intended to be used by
unlocked rules update path to always hold reference to block while working
with it. They use on new fine-grained locking mechanisms introduced in
previous patches in this set, instead of relying on global protection
provided by rtnl lock.
Extract code that is common with tcf_block_detach_ext() into common
function __tcf_block_put().
Extend tcf_block with rcu to allow safe deallocation when it is accessed
concurrently.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Protect block idr access with spinlock, instead of relying on rtnl lock.
Take tn->idr_lock spinlock during block insertion and removal.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract code that flushes and puts all chains on tcf block to two
standalone function to be shared with functions that locklessly get/put
reference to block.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a preparation for removing rtnl lock dependency from rules update path,
change tcf block reference counter type to refcount_t to allow modification
by concurrent users.
In block put function perform decrement and check reference counter once to
accommodate concurrent modification by unlocked users. After this change
tcf_chain_put at the end of block put function is called with
block->refcnt==0 and will deallocate block after the last chain is
released, so there is no need to manually deallocate block in this case.
However, if block reference counter reached 0 and there are no chains to
release, block must still be deallocated manually.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a preparation from removing rtnl lock dependency from rules update path,
use Qdisc rcu and reference counting capabilities instead of relying on
rtnl lock while working with Qdiscs. Create new tcf_block_release()
function, and use it to free resources taken by tcf_block_find().
Currently, this function only releases Qdisc and it is extended in next
patches in this series.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, Qdisc API functions assume that users have rtnl lock taken. To
implement rtnl unlocked classifiers update interface, Qdisc API must be
extended with functions that do not require rtnl lock.
Extend Qdisc structure with rcu. Implement special version of put function
qdisc_put_unlocked() that is called without rtnl lock taken. This function
only takes rtnl lock if Qdisc reference counter reached zero and is
intended to be used as optimization.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current implementation of qdisc_destroy() decrements Qdisc reference
counter and only actually destroy Qdisc if reference counter value reached
zero. Rename qdisc_destroy() to qdisc_put() in order for it to better
describe the way in which this function currently implemented and used.
Extract code that deallocates Qdisc into new private qdisc_destroy()
function. It is intended to be shared between regular qdisc_put() and its
unlocked version that is introduced in next patch in this series.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rtnl lock is encapsulated in netlink and cannot be accessed by other
modules directly. This means that reference counted objects that rely on
rtnl lock cannot use it with refcounter helper function that atomically
releases decrements reference and obtains mutex.
This patch implements simple wrapper function around refcount_dec_and_lock
that obtains rtnl lock if reference counter value reached 0.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
XSK UMEM is strongly single producer single consumer so reuse of
frames is challenging. Add a simple "stash" of FILL packets to
reuse for drivers to optionally make use of. This is useful
when driver has to free (ndo_stop) or resize a ring with an active
AF_XDP ZC socket.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In the case of implicit connect message with data > 1K, the flow
control accounting is incorrect. At this state, the socket does not
know the peer nodes capability and falls back to legacy flow control
by return 1, however the receiver of this message will perform the
new block accounting. This leads to a slack and eventually traffic
disturbance.
In this commit, we perform tipc_node_get_capabilities() at implicit
connect and perform accounting based on the peer's capability.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During socket close, if there is a open record with tx context, it needs
to be be freed apart from freeing up plaintext and encrypted scatter
lists. This patch frees up the open record if present in tx context.
Also tls_free_both_sg() has been renamed to tls_free_open_rec() to
indicate that the free record in tx context is being freed inside the
function.
Fixes: a42055e8d2 ("net/tls: Add support for async encryption")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current async encryption implementation sometimes showed up socket
memory accounting error during socket close. This results in kernel
warning calltrace. The root cause of the problem is that socket var
sk_forward_alloc gets corrupted due to access in sk_mem_charge()
and sk_mem_uncharge() being invoked from multiple concurrent contexts
in multicore processor. The apis sk_mem_charge() and sk_mem_uncharge()
are called from functions alloc_plaintext_sg(), free_sg() etc. It is
required that memory accounting apis are called under a socket lock.
The plaintext sg data sent for encryption is freed using free_sg() in
tls_encryption_done(). It is wrong to call free_sg() from this function.
This is because this function may run in irq context. We cannot acquire
socket lock in this function.
We remove calling of function free_sg() for plaintext data from
tls_encryption_done() and defer freeing up of plaintext data to the time
when the record is picked up from tx_list and transmitted/freed. When
tls_tx_records() gets called, socket is already locked and thus there is
no concurrent access problem.
Fixes: a42055e8d2 ("net/tls: Add support for async encryption")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Version bump conflict in batman-adv, take what's in net-next.
iavf conflict, adjustment of netdev_ops in net-next conflicting
with poll controller method removal in net.
Signed-off-by: David S. Miller <davem@davemloft.net>
BPF flow dissectors are configured per network namespace.
__skb_flow_dissect looks up the netns through dev_net(skb->dev).
In some dissector paths skb->dev is NULL, such as for Unix sockets.
In these cases fall back to looking up the netns by socket.
Analyzing the codepaths leading to __skb_flow_dissect I did not find
a case where both skb->dev and skb->sk are NULL. Warn and fall back to
standard flow dissector if one is found.
Fixes: d58e468b11 ("flow_dissector: implements flow dissector BPF hook")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cong noted that we need the same checks introduced by commit 76c0ddd8c3
("ip6_tunnel: be careful when accessing the inner header")
even for ipv4 tunnels.
Fixes: c544193214 ("GRE: Refactor GRE tunneling code.")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In tls_sw_sendmsg() and tls_sw_sendpage(), it is possible that the
uninitialised variable 'ret' gets passed to sk_stream_error(). So
initialise local variable 'ret' to '0. The warnings were detected by
'smatch' tool.
Fixes: a42055e8d2 ("net/tls: Add support for async encryption")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On processors with multi-engine crypto accelerators, it is possible that
multiple records get encrypted in parallel and their encryption
completion is notified to different cpus in multicore processor. This
leads to the situation where tls_encrypt_done() starts executing in
parallel on different cores. In current implementation, encrypted
records are queued to tx_ready_list in tls_encrypt_done(). This requires
addition to linked list 'tx_ready_list' to be protected. As
tls_decrypt_done() could be executing in irq content, it is not possible
to protect linked list addition operation using a lock.
To fix the problem, we remove linked list addition operation from the
irq context. We do tx_ready_list addition/removal operation from
application context only and get rid of possible multiple access to
the linked list. Before starting encryption on the record, we add it to
the tail of tx_ready_list. To prevent tls_tx_records() from transmitting
it, we mark the record with a new flag 'tx_ready' in 'struct tls_rec'.
When record encryption gets completed, tls_encrypt_done() has to only
update the 'tx_ready' flag to true & linked list add operation is not
required.
The changed logic brings some other side benefits. Since the records
are always submitted in tls sequence number order for encryption, the
tx_ready_list always remains sorted and addition of new records to it
does not have to traverse the linked list.
Lastly, we renamed tx_ready_list in 'struct tls_sw_context_tx' to
'tx_list'. This is because now, the some of the records at the tail are
not ready to transmit.
Fixes: a42055e8d2 ("net/tls: Add support for async encryption")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
send netlink notification if neigh_update results in NTF_ROUTER
change and if NEIGH_UPDATE_F_ISROUTER is on. Also move the
NTF_ROUTER change function into a helper.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows admin setting of NTF_ROUTER flag
on a neighbour entry. This enables external control
plane (like bgp evpn) to manage neigh entries with
NTF_ROUTER flag.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Summary:
This appears to be necessary and sufficient change to enable `MPLS` on
`ip6gre` tunnels (RFC4023).
This diff allows IP6GRE devices to be recognized by MPLS kernel module
and hence user can configure interface to accept packets with mpls
headers as well setup mpls routes on them.
Test Plan:
Test plan consists of multiple containers connected via GRE-V6 tunnel.
Then carrying out testing steps as below.
- Carry out necessary sysctl settings on all containers
```
sysctl -w net.mpls.platform_labels=65536
sysctl -w net.mpls.ip_ttl_propagate=1
sysctl -w net.mpls.conf.lo.input=1
```
- Establish IP6GRE tunnels
```
ip -6 tunnel add name if_1_2_1 mode ip6gre \
local 2401:db00:21:6048:feed:0::1 \
remote 2401:db00:21:6048:feed:0::2 key 1
ip link set dev if_1_2_1 up
sysctl -w net.mpls.conf.if_1_2_1.input=1
ip -4 addr add 169.254.0.2/31 dev if_1_2_1 scope link
ip -6 tunnel add name if_1_3_1 mode ip6gre \
local 2401:db00:21:6048:feed:0::1 \
remote 2401:db00:21:6048:feed:0::3 key 1
ip link set dev if_1_3_1 up
sysctl -w net.mpls.conf.if_1_3_1.input=1
ip -4 addr add 169.254.0.4/31 dev if_1_3_1 scope link
```
- Install MPLS encap rules on node-1 towards node-2
```
ip route add 192.168.0.11/32 nexthop encap mpls 32/64 \
via inet 169.254.0.3 dev if_1_2_1
```
- Install MPLS forwarding rules on node-2 and node-3
```
// node2
ip -f mpls route add 32 via inet 169.254.0.7 dev if_2_4_1
// node3
ip -f mpls route add 64 via inet 169.254.0.12 dev if_4_3_1
```
- Ping 192.168.0.11 (node4) from 192.168.0.1 (node1) (where routing
towards 192.168.0.1 is via IP route directly towards node1 from node4)
```
ping 192.168.0.11
```
- tcpdump on interface to capture ping packets wrapped within MPLS
header which inturn wrapped within IP6GRE header
```
16:43:41.121073 IP6
2401:db00:21:6048:feed::1 > 2401:db00:21:6048:feed::2:
DSTOPT GREv0, key=0x1, length 100:
MPLS (label 32, exp 0, ttl 255) (label 64, exp 0, [S], ttl 255)
IP 192.168.0.1 > 192.168.0.11:
ICMP echo request, id 1208, seq 45, length 64
0x0000: 6000 2cdb 006c 3c3f 2401 db00 0021 6048 `.,..l<?$....!`H
0x0010: feed 0000 0000 0001 2401 db00 0021 6048 ........$....!`H
0x0020: feed 0000 0000 0002 2f00 0401 0401 0100 ......../.......
0x0030: 2000 8847 0000 0001 0002 00ff 0004 01ff ...G............
0x0040: 4500 0054 3280 4000 ff01 c7cb c0a8 0001 E..T2.@.........
0x0050: c0a8 000b 0800 a8d7 04b8 002d 2d3c a05b ...........--<.[
0x0060: 0000 0000 bcd8 0100 0000 0000 1011 1213 ................
0x0070: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223 .............!"#
0x0080: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233 $%&'()*+,-./0123
0x0090: 3435 3637 4567
```
Signed-off-by: Saif Hasan <has@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add additional counters that will store the bytes/packets processed by
hardware. These will be exported through the netlink interface for
displaying by the iproute2 tc tool
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new hardware specific basic counter, TCA_STATS_BASIC_HW. This can
be used to count packets/bytes processed by hardware offload.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As diagnosed by Song Liu, ndo_poll_controller() can
be very dangerous on loaded hosts, since the cpu
calling ndo_poll_controller() might steal all NAPI
contexts (for all RX/TX queues of the NIC). This capture
can last for unlimited amount of time, since one
cpu is generally not able to drain all the queues under load.
It seems that all networking drivers that do use NAPI
for their TX completions, should not provide a ndo_poll_controller().
NAPI drivers have netpoll support already handled
in core networking stack, since netpoll_poll_dev()
uses poll_napi(dev) to iterate through registered
NAPI contexts for a device.
This patch allows netpoll_poll_dev() to process NAPI
contexts even for drivers not providing ndo_poll_controller(),
allowing for following patches in NAPI drivers.
Also we export netpoll_poll_dev() so that it can be called
by bonding/team drivers in following patches.
Reported-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use DECLARE_* not DEFINE_*
Fixes: 8360ed6745 ("RDS: IB: Use DEFINE_PER_CPU_SHARED_ALIGNED for rds_ib_stats")
Signed-off-by: David S. Miller <davem@davemloft.net>
So it should not fail with EPERM even though it is no longer implemented...
This is a fix for:
(userns)$ egrep ^Cap /proc/self/status
CapInh: 0000003fffffffff
CapPrm: 0000003fffffffff
CapEff: 0000003fffffffff
CapBnd: 0000003fffffffff
CapAmb: 0000003fffffffff
(userns)$ tcpdump -i usb_rndis0
tcpdump: WARNING: usb_rndis0: SIOCETHTOOL(ETHTOOL_GUFO) ioctl failed: Operation not permitted
Warning: Kernel filter failed: Bad file descriptor
tcpdump: can't remove kernel filter: Bad file descriptor
With this change it returns EOPNOTSUPP instead of EPERM.
See also https://github.com/the-tcpdump-group/libpcap/issues/689
Fixes: 08a00fea6d "net: Remove references to NETIF_F_UFO from ethtool."
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang warns that the address of a pointer will always evaluated as true
in a boolean context.
net/decnet/dn_dev.c:1366:10: warning: address of array 'dev->name' will
always evaluate to 'true' [-Wpointer-bool-conversion]
dev->name ? dev->name : "???",
~~~~~^~~~ ~
1 warning generated.
Link: https://github.com/ClangBuiltLinux/linux/issues/116
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, ip[6]frag_high_thresh sysctl values in new namespaces are
hard-limited to those of the root/init ns.
There are at least two use cases when it would be desirable to
set the high_thresh values higher in a child namespace vs the global hard
limit:
- a security/ddos protection policy may lower the thresholds in the
root/init ns but allow for a special exception in a child namespace
- testing: a test running in a namespace may want to set these
thresholds higher in its namespace than what is in the root/init ns
The new behavior:
# ip netns add testns
# ip netns exec testns bash
# sysctl -w net.ipv4.ipfrag_high_thresh=9000000
net.ipv4.ipfrag_high_thresh = 9000000
# sysctl net.ipv4.ipfrag_high_thresh
net.ipv4.ipfrag_high_thresh = 9000000
# sysctl -w net.ipv6.ip6frag_high_thresh=9000000
net.ipv6.ip6frag_high_thresh = 9000000
# sysctl net.ipv6.ip6frag_high_thresh
net.ipv6.ip6frag_high_thresh = 9000000
The old behavior:
# ip netns add testns
# ip netns exec testns bash
# sysctl -w net.ipv4.ipfrag_high_thresh=9000000
net.ipv4.ipfrag_high_thresh = 9000000
# sysctl net.ipv4.ipfrag_high_thresh
net.ipv4.ipfrag_high_thresh = 4194304
# sysctl -w net.ipv6.ip6frag_high_thresh=9000000
net.ipv6.ip6frag_high_thresh = 9000000
# sysctl net.ipv6.ip6frag_high_thresh
net.ipv6.ip6frag_high_thresh = 4194304
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is similar to how ipv4 now behaves:
commit 0ff89efb52 ("ip: fail fast on IP defrag errors").
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang warns when two declarations' section attributes don't match.
net/rds/ib_stats.c:40:1: warning: section does not match previous
declaration [-Wsection]
DEFINE_PER_CPU_SHARED_ALIGNED(struct rds_ib_statistics, rds_ib_stats);
^
./include/linux/percpu-defs.h:142:2: note: expanded from macro
'DEFINE_PER_CPU_SHARED_ALIGNED'
DEFINE_PER_CPU_SECTION(type, name,
PER_CPU_SHARED_ALIGNED_SECTION) \
^
./include/linux/percpu-defs.h:93:9: note: expanded from macro
'DEFINE_PER_CPU_SECTION'
extern __PCPU_ATTRS(sec) __typeof__(type) name;
\
^
./include/linux/percpu-defs.h:49:26: note: expanded from macro
'__PCPU_ATTRS'
__percpu __attribute__((section(PER_CPU_BASE_SECTION sec)))
\
^
net/rds/ib.h:446:1: note: previous attribute is here
DECLARE_PER_CPU(struct rds_ib_statistics, rds_ib_stats);
^
./include/linux/percpu-defs.h:111:2: note: expanded from macro
'DECLARE_PER_CPU'
DECLARE_PER_CPU_SECTION(type, name, "")
^
./include/linux/percpu-defs.h:87:9: note: expanded from macro
'DECLARE_PER_CPU_SECTION'
extern __PCPU_ATTRS(sec) __typeof__(type) name
^
./include/linux/percpu-defs.h:49:26: note: expanded from macro
'__PCPU_ATTRS'
__percpu __attribute__((section(PER_CPU_BASE_SECTION sec)))
\
^
1 warning generated.
The initial definition was added in commit ec16227e14 ("RDS/IB:
Infiniband transport") and the cache aligned definition was added in
commit e6babe4cc4 ("RDS/IB: Stats and sysctls") right after. The
definition probably should have been updated in net/rds/ib.h, which is
what this patch does.
Link: https://github.com/ClangBuiltLinux/linux/issues/114
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/ipv4/fib_frontend.c: In function 'fib_info_nh_uses_dev':
net/ipv4/fib_frontend.c:322:6: error: unused variable 'ret' [-Werror=unused-variable]
cc1: all warnings being treated as errors
Fixes: 78f2756c5f ("net/ipv4: Move device validation to helper")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the earliest departure time model, we no longer plan
special casing TCP retransmits. We therefore remove dead
code (since most compilers understood skb_is_retransmit()
was false)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now TCP keeps track of tcp_wstamp_ns, recording the earliest
departure time of next packet, we can remove duplicate code
from tcp_internal_pacing()
This removes one ktime_get_tai_ns() call, and a divide.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP keeps track of tcp_wstamp_ns by itself, meaning sch_fq
no longer has to do it.
Thanks to this model, TCP can get more accurate RTT samples,
since pacing no longer inflates them.
This has the nice effect of removing some delays caused by FQ
quantum mechanism, causing inflated max/P99 latencies.
Also we might relax TCP Small Queue tight limits in the future,
since this new model allow TCP to build bigger batches, since
sch_fq (or a device with earliest departure time offload) ensure
these packets will be delivered on time.
Note that other protocols are not converted (they will probably
never be) so sch_fq has still support for SO_MAX_PACING_RATE
Tested:
Test showing FQ pacing quantum artifact for low-rate flows,
adding unexpected throttles for RPC flows, inflating max and P99 latencies.
The parameters chosen here are to show what happens typically when
a TCP flow has a reduced pacing rate (this can be caused by a reduced
cwin after few losses, or/and rtt above few ms)
MIBS="MIN_LATENCY,MEAN_LATENCY,MAX_LATENCY,P99_LATENCY,STDDEV_LATENCY"
Before :
$ netperf -H 10.246.7.133 -t TCP_RR -Cc -T6,6 -- -q 2000000 -r 100,100 -o $MIBS
MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.246.7.133 () port 0 AF_INET : first burst 0 : cpu bind
Minimum Latency Microseconds,Mean Latency Microseconds,Maximum Latency Microseconds,99th Percentile Latency Microseconds,Stddev Latency Microseconds
19,82.78,5279,3825,482.02
After :
$ netperf -H 10.246.7.133 -t TCP_RR -Cc -T6,6 -- -q 2000000 -r 100,100 -o $MIBS
MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.246.7.133 () port 0 AF_INET : first burst 0 : cpu bind
Minimum Latency Microseconds,Mean Latency Microseconds,Maximum Latency Microseconds,99th Percentile Latency Microseconds,Stddev Latency Microseconds
20,49.94,128,63,3.18
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Next patch will use tcp_wstamp_ns to feed internal
TCP pacing timer, so switch to CLOCK_TAI to share same base.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch internal TCP skb->skb_mstamp to skb->skb_mstamp_ns,
from usec units to nsec units.
Do not clear skb->tstamp before entering IP stacks in TX,
so that qdisc or devices can implement pacing based on the
earliest departure time instead of socket sk->sk_pacing_rate
Packets are fed with tcp_wstamp_ns, and following patch
will update tcp_wstamp_ns when both TCP and sch_fq switch to
the earliest departure time mechanism.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP will soon provide earliest departure time on TX skbs.
It needs to track this in a new variable.
tcp_mstamp_refresh() needs to update this variable, and
became too big to stay an inline.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP will soon provide per skb->tstamp with earliest departure time,
so that sch_fq does not have to determine departure time by looking
at socket sk_pacing_rate.
We chose in linux-4.19 CLOCK_TAI as the clock base for transports,
qdiscs, and NIC offloads.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are few places where TCP reads skb->skb_mstamp expecting
a value in usec unit.
skb->tstamp (aka skb->skb_mstamp) will soon store CLOCK_TAI nsec value.
Add tcp_skb_timestamp_us() to provide proper conversion when needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smatch reports that devlink_dpipe_send_and_alloc_skb() frees the skb
on error so this is a double free. We fixed a bunch of these bugs in
commit 7fe4d6dcbc ("devlink: Remove redundant free on error path") but
we accidentally overlooked this one.
Fixes: d9f9b9a4d0 ("devlink: Add support for resource abstraction")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In current implementation, tls records are encrypted & transmitted
serially. Till the time the previously submitted user data is encrypted,
the implementation waits and on finish starts transmitting the record.
This approach of encrypt-one record at a time is inefficient when
asynchronous crypto accelerators are used. For each record, there are
overheads of interrupts, driver softIRQ scheduling etc. Also the crypto
accelerator sits idle most of time while an encrypted record's pages are
handed over to tcp stack for transmission.
This patch enables encryption of multiple records in parallel when an
async capable crypto accelerator is present in system. This is achieved
by allowing the user space application to send more data using sendmsg()
even while previously issued data is being processed by crypto
accelerator. This requires returning the control back to user space
application after submitting encryption request to accelerator. This
also means that zero-copy mode of encryption cannot be used with async
accelerator as we must be done with user space application buffer before
returning from sendmsg().
There can be multiple records in flight to/from the accelerator. Each of
the record is represented by 'struct tls_rec'. This is used to store the
memory pages for the record.
After the records are encrypted, they are added in a linked list called
tx_ready_list which contains encrypted tls records sorted as per tls
sequence number. The records from tx_ready_list are transmitted using a
newly introduced function called tls_tx_records(). The tx_ready_list is
polled for any record ready to be transmitted in sendmsg(), sendpage()
after initiating encryption of new tls records. This achieves parallel
encryption and transmission of records when async accelerator is
present.
There could be situation when crypto accelerator completes encryption
later than polling of tx_ready_list by sendmsg()/sendpage(). Therefore
we need a deferred work context to be able to transmit records from
tx_ready_list. The deferred work context gets scheduled if applications
are not sending much data through the socket. If the applications issue
sendmsg()/sendpage() in quick succession, then the scheduling of
tx_work_handler gets cancelled as the tx_ready_list would be polled from
application's context itself. This saves scheduling overhead of deferred
work.
The patch also brings some side benefit. We are able to get rid of the
concept of CLOSED record. This is because the records once closed are
either encrypted and then placed into tx_ready_list or if encryption
fails, the socket error is set. This simplifies the kernel tls
sendpath. However since tls_device.c is still using macros, accessory
functions for CLOSED records have been retained.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The backend handling for /proc/net/if_inet6 in addrconf.c doesn't properly
handle starting/stopping the iteration. The problem is that at some point
during the iteration, an overflow is detected and the process is
subsequently stopped. The item being shown via seq_printf() when the
overflow occurs is not actually shown, though. When start() is
subsequently called to resume iterating, it returns the next item, and
thus the item that was being processed when the overflow occurred never
gets printed.
Alter the meaning of the private data member "offset". Currently, when it
is not 0 (which only happens at the very beginning), "offset" represents
the next hlist item to be printed. After this change, "offset" always
represents the current item.
This is also consistent with the private data member "bucket", which
represents the current bucket, and also the use of "pos" as defined in
seq_file.txt:
The pos passed to start() will always be either zero, or the most
recent pos used in the previous session.
Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netlbl_unlabel_addrinfo_get() assumes that if it finds the
NLBL_UNLABEL_A_IPV4ADDR attribute, it must also have the
NLBL_UNLABEL_A_IPV4MASK attribute as well. However, this is
not necessarily the case as the current checks in
netlbl_unlabel_staticadd() and friends are not sufficent to
enforce this.
If passed a netlink message with NLBL_UNLABEL_A_IPV4ADDR,
NLBL_UNLABEL_A_IPV6ADDR, and NLBL_UNLABEL_A_IPV6MASK attributes,
these functions will all call netlbl_unlabel_addrinfo_get() which
will then attempt dereference NULL when fetching the non-existent
NLBL_UNLABEL_A_IPV4MASK attribute:
Unable to handle kernel NULL pointer dereference at virtual address 0
Process unlab (pid: 31762, stack limit = 0xffffff80502d8000)
Call trace:
netlbl_unlabel_addrinfo_get+0x44/0xd8
netlbl_unlabel_staticremovedef+0x98/0xe0
genl_rcv_msg+0x354/0x388
netlink_rcv_skb+0xac/0x118
genl_rcv+0x34/0x48
netlink_unicast+0x158/0x1f0
netlink_sendmsg+0x32c/0x338
sock_sendmsg+0x44/0x60
___sys_sendmsg+0x1d0/0x2a8
__sys_sendmsg+0x64/0xb4
SyS_sendmsg+0x34/0x4c
el0_svc_naked+0x34/0x38
Code: 51001149 7100113f 540000a0 f9401508 (79400108)
---[ end trace f6438a488e737143 ]---
Kernel panic - not syncing: Fatal exception
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
kfree_skb has taken the null pointer into account. hence it is safe
to remove the redundant null pointer check before kfree_skb.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kfree_skb has taken the null pointer into account. hence it is safe
to remove the redundant null pointer check before kfree_skb.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kfree_skb has taken the null pointer into account. hence it is safe
to remove the redundant null pointer check before kfree_skb.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Action API was changed to work with actions and action_idr in concurrency
safe manner, however tcf_del_walker() still uses actions without taking a
reference or idrinfo->lock first, and deletes them directly, disregarding
possible concurrent delete.
Change tcf_del_walker() to take idrinfo->lock while iterating over actions
and use new tcf_idr_release_unsafe() to release them while holding the
lock.
And the blocking function fl_hw_destroy_tmplt() could be called when we
put a filter chain, so defer it to a work queue.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
[xiyou.wangcong@gmail.com: heavily modify the code and changelog]
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
else we will oops (null deref) when the attributes aren't present.
Also add back the EOPNOTSUPP in case MARK filtering is requested but
kernel doesn't support it.
Fixes: 59c08c69c2 ("netfilter: ctnetlink: Support L3 protocol-filter on flush")
Reported-by: syzbot+e45eda8eda6e93a03959@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Convert nft_fib4_eval to the new device checking helper and
remove the duplicate code.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert rpfilter_lookup_reverse to the new device checking helper
and remove the duplicate code.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the device matching check in __fib_validate_source to a helper and
export it for use by netfilter modules. Code move only; no functional
change intended.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When processing pmtu update from an icmp packet, it calls .update_pmtu
with sk instead of skb in sctp_transport_update_pmtu.
However for sctp, the daddr in the transport might be different from
inet_sock->inet_daddr or sk->sk_v6_daddr, which is used to update or
create the route cache. The incorrect daddr will cause a different
route cache created for the path.
So before calling .update_pmtu, inet_sock->inet_daddr/sk->sk_v6_daddr
should be updated with the daddr in the transport, and update it back
after it's done.
The issue has existed since route exceptions introduction.
Fixes: 4895c771c7 ("ipv4: Add FIB nexthop exceptions.")
Reported-by: ian.periam@dialogic.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sizeof(sizeof()) is quite strange and does not seem to be what
is wanted here.
The issue is detected with the help of Coccinelle.
Fixes: 3921584674 ("netfilter: conntrack: remove nlattr_size pointer from l4proto trackers")
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The function nft_validate_register_store requires a struct of type
struct nft_data_types. NFTA_DATA_VALUE is of type enum
nft_verdict_attributes. Pass the correct enum type.
This fixes a warning seen with Clang:
net/netfilter/nft_osf.c:52:8: warning: implicit conversion from
enumeration type 'enum nft_data_attributes' to different enumeration
type 'enum nft_data_types' [-Wenum-conversion]
NFTA_DATA_VALUE, NFT_OSF_MAXGENRELEN);
^~~~~~~~~~~~~~~
Fixes: b96af92d6e ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf")
Link: https://github.com/ClangBuiltLinux/linux/issues/103
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
rhashtable_walk_init() is deprecated and rhashtable_walk_enter() can be
used instead. rhashtable_walk_init() is wrapper function of
rhashtable_walk_enter() so that logic is actually same.
But rhashtable_walk_enter() doesn't return error hence error path
code can be removed.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
__nf_nat_mangle_tcp_packet() and nf_nat_mangle_udp_packet() call
mangle_contents(). and __nf_nat_mangle_tcp_packet()
and mangle_contents() call skb_is_nonlinear(). so that
skb_is_nonlinear() in __nf_nat_mangle_tcp_packet() is unnecessary.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For starters, the bridge netfilter code registers operations that
are invoked any time nh_hook is called. Specifically, ip_sabotage_in
watches for nested calls for NF_INET_PRE_ROUTING when a bridge is in
the stack.
Packet wise, the bridge netfilter hook runs first. br_nf_pre_routing
allocates nf_bridge, sets in_prerouting to 1 and calls NF_HOOK for
NF_INET_PRE_ROUTING. It's finish function, br_nf_pre_routing_finish,
then resets in_prerouting flag to 0 and the packet continues up the
stack. The packet eventually makes it to the VRF driver and it invokes
nf_hook for NF_INET_PRE_ROUTING in case any rules have been added against
the vrf device.
Because of the registered operations the call to nf_hook causes
ip_sabotage_in to be invoked. That function sees the nf_bridge on the
skb and that in_prerouting is not set. Thinking it is an invalid nested
call it steals (drops) the packet.
Update ip_sabotage_in to recognize that the bridge or one of its upper
devices (e.g., vlan) can be enslaved to a VRF (L3 master device) and
allow the packet to go through the nf_hook a second time.
Fixes: 73e20b761a ("net: vrf: Add support for PREROUTING rules on vrf device")
Reported-by: D'Souza, Nelson <ndsouza@ciena.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
All higher l4proto numbers are handled by the generic tracker; the
l4proto lookup function already returns generic one in case the l4proto
number exceeds max size.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
l4 protocols are demuxed by l3num, l4num pair.
However, almost all l4 trackers are l3 agnostic.
Only exceptions are:
- gre, icmp (ipv4 only)
- icmpv6 (ipv6 only)
This commit gets rid of the l3 mapping, l4 trackers can now be looked up
by their IPPROTO_XXX value alone, which gets rid of the additional l3
indirection.
For icmp, ipcmp6 and gre, add a check on state->pf and
return -NF_ACCEPT in case we're asked to track e.g. icmpv6-in-ipv4,
this seems more fitting than using the generic tracker.
Additionally we can kill the 2nd l4proto definitions that were needed
for v4/v6 split -- they are now the same so we can use single l4proto
struct for each protocol, rather than two.
The EXPORT_SYMBOLs can be removed as all these object files are
part of nf_conntrack with no external references.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Its unused, next patch will remove l4proto->l3proto number to simplify
l4 protocol demuxer lookup.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
icmp(v6) are the only two layer four protocols that need the error()
callback (to handle icmp errors that are related to an established
connections, e.g. packet too big, port unreachable and the like).
Remove the error callback and handle these two special cases from the core.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The error() handler gets called before allocating or looking up a
connection tracking entry.
We can instead use direct calls from the ->packet() handlers which get
invoked for every packet anyway.
Only exceptions are icmp and icmpv6, these two special cases will be
handled in the next patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Only two protocols need the ->error() function: icmp and icmpv6.
This is because icmp error mssages might be RELATED to an existing
connection (e.g. PMTUD, port unreachable and the like), and their
->error() handlers do this.
The error callback is already optional, so remove it for
udp and call them from ->packet() instead.
As the error() callback can call checksum functions that write to
skb->csum*, the const qualifier has to be removed as well.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
->new() gets invoked after ->error() and before ->packet() if
a conntrack lookup has found no result for the tuple.
We can fold it into ->packet() -- the packet() implementations
can check if the conntrack is confirmed (new) or not
(already in hash).
If its unconfirmed, the conntrack isn't in the hash yet so current
skb created a new conntrack entry.
Only relevant side effect -- if packet() doesn't return NF_ACCEPT
but -NF_ACCEPT (or drop), while the conntrack was just created,
then the newly allocated conntrack is freed right away, rather than not
created in the first place.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_hook_state contains all the hook meta-information: netns, protocol family,
hook location, and so on.
Instead of only passing selected information, pass a pointer to entire
structure.
This will allow to merge the error and the packet handlers and remove
the ->new() function in followup patches.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The generic netlink family is only initialized during module init,
so it should be __ro_after_init like all other generic netlink
families.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no way currently for an IPv6 client connect using a loopback
address in a VRF, whereas for IPv4 the loopback address can be added:
$ sudo ip addr add dev vrfred 127.0.0.1/8
$ sudo ip -6 addr add ::1/128 dev vrfred
RTNETLINK answers: Cannot assign requested address
So allow ::1 to be configured on an L3 master device. In order for
this to be usable ip_route_output_flags needs to not consider ::1 to
be a link scope address (since oif == l3mdev and so it would be
dropped), and ipv6_rcv needs to consider the l3mdev to be a loopback
device so that it doesn't drop the packets.
Signed-off-by: Robert Shearman <rshearma@vyatta.att-mail.com>
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When bringing down the netdevice (incl. detaching it) and calling
netif_carrier_off directly or indirectly the latter triggers an
asynchronous linkwatch event.
This linkwatch event eventually may fail to access chip registers in
the ndo_get_stats/ndo_get_stats64 callback because the device isn't
accessible any longer, see call trace in [0].
To prevent this scenario don't check for IFF_UP only, but also make
sure that the netdevice is present.
[0] https://lists.openwall.net/netdev/2018/03/15/62
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore,
We prefer to use the macro rather than calculating its value.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore,
We prefer to use the macro rather than calculating its value.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore,
We prefer to use the macro rather than calculating its value.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- bump version strings, by Simon Wunderlich
- Inform users about debugfs interface deprecation, by Sven Eckelmann
- Implement tracing, planned to replace debugfs log messages,
by Sven Eckelmann
- Move OGM rebroadcasts to per interface struct, by Sven Eckelmann
- Enable LockLess TX to increase throughput, by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----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=XZYf
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-for-davem-20180919' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Inform users about debugfs interface deprecation, by Sven Eckelmann
- Implement tracing, planned to replace debugfs log messages,
by Sven Eckelmann
- Move OGM rebroadcasts to per interface struct, by Sven Eckelmann
- Enable LockLess TX to increase throughput, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Avoid ELP information leak, by Sven Eckelmann
- Fix sysfs segfault issues, by Sven Eckelmann (2 patches)
- Fix locking when adding entries in various lists,
by Sven Eckelmann (5 patches)
- Fix refcount if queue_work() fails, by Marek Lindner (2 patches)
- Fixup forgotten version bump, by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----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=B1qZ
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-for-davem-20180919' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
pull request for net: batman-adv 2018-09-19
here are some bugfixes which we would like to see integrated into net.
We forgot to bump the version number in the last round for net-next, so
the belated patch to do that is included - we hope you can adopt it.
This will most likely create a merge conflict later when merging into
net-next with this rounds net-next patchset, but net-next should keep
the 2018.4 version[1].
[1] resolution:
--- a/net/batman-adv/main.h
+++ b/net/batman-adv/main.h
@@ -25,11 +25,7 @@
#define BATADV_DRIVER_DEVICE "batman-adv"
#ifndef BATADV_SOURCE_VERSION
-<<<<<<<
-#define BATADV_SOURCE_VERSION "2018.3"
-=======
#define BATADV_SOURCE_VERSION "2018.4"
->>>>>>>
#endif
/* B.A.T.M.A.N. parameters */
Please pull or let me know of any problem!
Here are some batman-adv bugfixes:
- Avoid ELP information leak, by Sven Eckelmann
- Fix sysfs segfault issues, by Sven Eckelmann (2 patches)
- Fix locking when adding entries in various lists,
by Sven Eckelmann (5 patches)
- Fix refcount if queue_work() fails, by Marek Lindner (2 patches)
- Fixup forgotten version bump, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When dst->_metrics and f6i->fib6_metrics share the same memory, both
take reference count on the dst_metrics structure. However, when dst is
destroyed, ip6_dst_destroy() only invokes dst_destroy_metrics_generic()
which does not take care of READONLY metrics and does not release refcnt.
This causes memory leak.
Similar to ipv4 logic, the fix is to properly release refcnt and free
the memory space pointed by dst->_metrics if refcnt becomes 0.
Fixes: 93531c6743 ("net/ipv6: separate handling of FIB entries from dst based routes")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Comparing an int to a size, which is unsigned, causes the int to become
unsigned, giving the wrong result. kernel_sendmsg can return a negative
error code.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't check a listen socket for pending urgent data in smc_poll().
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a linkgroup is terminated abnormally already due to failing
LLC CONFIRM LINK or LLC ADD LINK, fallback to TCP is still possible.
In this case do not switch to state SMC_PEERABORTWAIT and do not set
sk_err.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For a failing smc_listen_rdma_finish() smc_listen_decline() is
called. If fallback is possible, the new socket is already enqueued
to be accepted in smc_listen_decline(). Avoid enqueuing a second time
afterwards in this case, otherwise the smc_create_lgr_pending lock
is released twice:
[ 373.463976] WARNING: bad unlock balance detected!
[ 373.463978] 4.18.0-rc7+ #123 Tainted: G O
[ 373.463979] -------------------------------------
[ 373.463980] kworker/1:1/30 is trying to release lock (smc_create_lgr_pending) at:
[ 373.463990] [<000003ff801205fc>] smc_listen_work+0x22c/0x5d0 [smc]
[ 373.463991] but there are no more locks to release!
[ 373.463991]
other info that might help us debug this:
[ 373.463993] 2 locks held by kworker/1:1/30:
[ 373.463994] #0: 00000000772cbaed ((wq_completion)"events"){+.+.}, at: process_one_work+0x1ec/0x6b0
[ 373.464000] #1: 000000003ad0894a ((work_completion)(&new_smc->smc_listen_work)){+.+.}, at: process_one_work+0x1ec/0x6b0
[ 373.464003]
stack backtrace:
[ 373.464005] CPU: 1 PID: 30 Comm: kworker/1:1 Kdump: loaded Tainted: G O 4.18.0-rc7uschi+ #123
[ 373.464007] Hardware name: IBM 2827 H43 738 (LPAR)
[ 373.464010] Workqueue: events smc_listen_work [smc]
[ 373.464011] Call Trace:
[ 373.464015] ([<0000000000114100>] show_stack+0x60/0xd8)
[ 373.464019] [<0000000000a8c9bc>] dump_stack+0x9c/0xd8
[ 373.464021] [<00000000001dcaf8>] print_unlock_imbalance_bug+0xf8/0x108
[ 373.464022] [<00000000001e045c>] lock_release+0x114/0x4f8
[ 373.464025] [<0000000000aa87fa>] __mutex_unlock_slowpath+0x4a/0x300
[ 373.464027] [<000003ff801205fc>] smc_listen_work+0x22c/0x5d0 [smc]
[ 373.464029] [<0000000000197a68>] process_one_work+0x2a8/0x6b0
[ 373.464030] [<0000000000197ec2>] worker_thread+0x52/0x410
[ 373.464033] [<000000000019fd0e>] kthread+0x15e/0x178
[ 373.464035] [<0000000000aaf58a>] kernel_thread_starter+0x6/0xc
[ 373.464052] [<0000000000aaf584>] kernel_thread_starter+0x0/0xc
[ 373.464054] INFO: lockdep is turned off.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In state SMC_INIT smc_poll() delegates polling to the internal
CLC socket. This means, once the connect worker has finished
its kernel_connect() step, the poll wake-up may occur. This is not
intended. The wake-up should occur from the wake up call in
smc_connect_work() after __smc_connect() has finished.
Thus in state SMC_INIT this patch now calls sock_poll_wait() on the
main SMC socket.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When handling SHDLC I-Frame commands "pipe" field used for indexing
into an array should be checked before usage. If left unchecked it
might access memory outside of the array of size NFC_HCI_MAX_PIPES(127).
Malformed NFC HCI frames could be injected by a malicious NFC device
communicating with the device being attacked (remote attack vector),
or even by an attacker with physical access to the I2C bus such that
they could influence the data transfers on that bus (local attack vector).
skb->data is controlled by the attacker and has only been sanitized in
the most trivial ways (CRC check), therefore we can consider the
create_info struct and all of its members to tainted. 'create_info->pipe'
with max value of 255 (uint8) is used to take an offset of the
hdev->pipes array of 127 elements which can lead to OOB write.
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Allen Pais <allen.pais@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Suggested-by: Kevin Deus <kdeus@google.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two new tls tests added in parallel in both net and net-next.
Used Stephen Rothwell's linux-next resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
Li RongQing