In 64b (48bit canonical) PPGTT addressing, the PDP0 register contains
the base address to PML4, while the other PDP registers are ignored.
In LRC, the addressing mode must be specified in every context
descriptor, and the base address to PML4 is stored in the reg state.
v2: PML4 update in legacy context switch is left for historic reasons,
the preferred mode of operation is with lrc context based submission.
v3: s/gen8_map_page_directory/gen8_setup_page_directory and
s/gen8_map_page_directory_pointer/gen8_setup_page_directory_pointer.
Also, clflush will be needed for bxt. (Akash)
v4: Squashed lrc-specific code and use a macro to set PML4 register.
v5: Rebase after Mika's ppgtt cleanup / scratch merge patch series.
PDP update in bb_start is only for legacy 32b mode.
v6: Rebase after final merged version of Mika's ppgtt/scratch
patches.
v7: There is no need to update the pml4 register value in
execlists_update_context. (Akash)
v8: Move pd and pdp setup functions to a previous patch, they do not
belong here. (Akash)
v9: Check USES_FULL_48BIT_PPGTT instead of GEN8_CTX_ADDRESSING_MODE in
gen8_emit_bb_start to check if emit pdps is needed. (Akash)
Cc: Akash Goel <akash.goel@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Akash Goel <akash.goel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If idle to active bit is set, the rest of the fields
in CSQ are not valid.
Bail out early if this is the case in order to prevent
rest of the loop inspecting stale values.
This was found by Bspec/code inspection. Doesn't seem to fix any of
the known issues.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
[danvet: Add note about how this was found.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This register needs to be updated with masked writes.
This was found by code inspection and comparison with Bspec and
doesn't seem to fix any known issue.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
[danvet: Add note about impact.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The Golden batch carries 3D state at the beginning so that HW starts with
a known state. It is carried as a binary blob which is auto-generated from
source. The idea was it would be easier to maintain and keep the complexity
out of the kernel which makes sense as we don't really touch it. However if
you really need to update it then you need to update generator source and
keep the binary blob in sync with it.
There is a need to patch this in bxt to send one additional command to enable
a feature. A solution was to patch the binary data with some additional
data structures (included as part of auto-generator source) but it was
unnecessarily complicated.
Chris suggested the idea of having a secondary batch and execute two batch
buffers. It has clear advantages as we needn't touch the base golden batch,
can customize secondary/auxiliary batch depending on Gen and can be carried
in the driver with no dependencies.
This patch adds support for this auxiliary batch which is inserted at the
end of golden batch and is completely independent from it. Thanks to Mika
for the preliminary review.
v2: Strictly conform to the batch size requirements to cover Gen2 and
add comments to clarify overflow check in macro (Chris, Mika).
v3: aux_batch_offset was declared as u64, change it to u32 (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Armin Reese <armin.c.reese@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Backmerge fixes since it's getting out of hand again with the massive
split due to atomic between -next and 4.2-rc. All the bugfixes in
4.2-rc are addressed already (by converting more towards atomic
instead of minimal duct-tape) so just always pick the version in next
for the conflicts in modeset code.
All the other conflicts are just adjacent lines changed.
Conflicts:
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem_gtt.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_ringbuffer.h
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
In Indirect context w/a batch buffer,
+WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken
v2: SKL revision id was used for BXT, copy paste error found during
internal review (Bob Beckett).
v3: explain why part of the WA is in Per ctx batch (Mika)
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In Indirect context w/a batch buffer,
+WaFlushCoherentL3CacheLinesAtContextSwitch:skl,bxt
v2: address static checker warning where unsigned value was checked for
less than zero which is never true (Dan Carpenter).
v3: The WA uses default value of GEN8_L3SQCREG4 during flush but that disables
some other WA; update default value to retain it and document dependency (Mika).
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In Indirect and Per context w/a batch buffer,
+WaDisableCtxRestoreArbitration
v2: SKL revision id was used for BXT, copy paste error found during
internal review (Bob Beckett).
v3: use updated macro.
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Robert Beckett <robert.beckett@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch only enables support for Gen9, the actual WA will be
initialized in subsequent patches.
The WARN that we use to warn user if WA batch support is not available
for a particular Gen is replaced with DRM_ERROR as warning here doesn't
really add much value.
v2: include all infrastructure bits in this patch so that subsequent
changes only correspond the WA added (Chris)
v3: use updated macro.
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This change adds the programming of the MOCS registers to the gen 9+
platforms. The set of MOCS configuration entries introduced by this
patch is intended to be minimal but sufficient to cover the needs of
current userspace - i.e. a good set of defaults. It is expected to be
extended in the future to provide further default values or to allow
userspace to redefine its private MOCS tables based on its demand for
additional caching configurations. In this setup, userspace should
only utilize the first N entries, higher entries are reserved for
future use.
It creates a fixed register set that is programmed across the different
engines so that all engines have the same table. This is done as the
main RCS context only holds the registers for itself and the shared
L3 values. By trying to keep the registers consistent across the
different engines it should make the programming for the registers
consistent.
v2:
-'static const' for private data structures and style changes.(Matt Turner)
v3:
- Make the tables "slightly" more readable. (Damien Lespiau)
- Updated tables fix performance regression.
v4:
- Code formatting. (Chris Wilson)
- re-privatised mocs code. (Daniel Vetter)
v5:
- Changed the name of a function. (Chris Wilson)
v6:
- re-based
- Added Mesa table entry (skylake & broxton) (Francisco Jerez)
- Tidied up the readability defines (Francisco Jerez)
- NUMBER of entries defines wrong. (Jim Bish)
- Added comments to clear up the meaning of the tables (Jim Bish)
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
v7 (Francisco Jerez):
- Don't write L3-specific MOCS_ESC/SCC values into the e/LLC control
tables. Prefix L3-specific defines consistently with L3_ and
e/LLC-specific defines with LE_ to avoid this kind of confusion in
the future.
- Change L3CC WT define back to RESERVED (matches my hardware
documentation and the original patch, probably a misunderstanding
of my own previous comment).
- Drop Android tables, define new minimal tables more suitable for the
open source stack.
- Add comment that the MOCS tables are part of the kernel ABI.
- Move intel_logical_ring_begin() and _advance() calls one level down
(Chris Wilson).
- Minor formatting and style fixes.
v8 (Francisco Jerez):
- Add table size sanity check to emit_mocs_control/l3cc_table() (Chris
Wilson).
- Add comment about undefined entries being implicitly set to uncached
for forwards compatibility.
v9 (Francisco Jerez):
- Minor style fixes.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
wa_ctx_emit() depends on the name of a local variable; if the name of that
variable is changed then we get compile errors. In this case it is unlikely
to be changed as this macro is only used in this set of functions but
Kernel coding guidelines doesn't recommend doing this. It was my mistake
as I should have corrected it at the beginning but missed so correct
this before there are more usages of this macro (Bob Beckett).
https://www.kernel.org/doc/Documentation/CodingStyle,
Chapter 12, "Things to avoid when using macros", point 2):
"
2) macros that depend on having a local variable with a magic name:
#define FOO(val) bar(index, val)
might look like a good thing, but it's confusing as hell when one reads the
code and it's prone to breakage from seemingly innocent changes.
"
v2: Optimization to avoid multiple evaluation of 'index' in the macro.
Since we invoke it multiple times, compiler, if it can, should be able to coalesce
them into a single condition and remove multiple WARN_ON checks (Chris).
Suggested-by: Robert Beckett <robert.beckett@intel.com>
Cc: Robert Beckett <robert.beckett@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now when we have requests this deep on call chain, we can mark
the elsp being submitted when it actually is. Remove temp variable
and readjust commenting to more closely fit to the code.
v2: Avoid tmp variable and reduce number of writes (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pass around requests to carry context deeper in callchain.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pass around requests to carry context deeper in callchain.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pass around requests to carry context deeper in callchain.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In preparation to make intel_lr_context_pin|unpin to accept
requests, assign ringbuf into request before we call the pinning.
v2: No need to unset ringbuf on error path (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pass around requests to carry context deeper in callchain.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pass around requests to carry context deeper in callchain.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In this WA we need to set GEN8_L3SQCREG4[21:21] and reset it after PIPE_CONTROL
instruction but there is a slight complication as this is applied in WA batch
where the values are only initialized once.
Dave identified an issue with the current implementation where the register value
is read once at the beginning and it is reused; this patch corrects this by saving
the register value to memory, update register with the bit of our interest and
restore it back with original value.
This implementation uses MI_LOAD_REGISTER_MEM which is currently only used
by command parser and was using a default length of 0. This is now updated
with correct length and moved to appropriate place.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GEN8 and above uses Execlists by default instead of the legacy
ringbuffer for batch execution. This patch enables the resource
streamer bits when required.
Patch is based on the initial work by Minu Mathai <minu.mathai@intel.com>
This version also adds the required bits to enable GEN8 Resource
Streamer context save and restore for Execlists.
Cc: ville.syrjala@linux.intel.com
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
An earlier patch was added to reserve space in the ring buffer for the
commands issued during 'add_request()'. The initial version was
pessimistic in the way it handled buffer wrapping and would cause
premature wraps and thus waste ring space.
This patch updates the code to better handle the wrap case. It no
longer enforces that the space being asked for and the reserved space
are a single contiguous block. Instead, it allows the reserve to be on
the far end of a wrap operation. It still guarantees that the space is
available so when the wrap occurs, no wait will happen. Thus the wrap
cannot fail which is the whole point of the exercise.
Also fixed a merge failure with some comments from the original patch.
v2: Incorporated suggestion by David Gordon to move the wrap code
inside the prepare function and thus allow a single combined
wait_for_space() call rather than doing one before the wrap and
another after. This also makes the prepare code much simpler and
easier to follow.
v3: Fix for 'effective_size' vs 'size' during ring buffer remainder
calculations (spotted by Tomas Elf).
For: VIZ-5115
CC: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.2.
I've one other new driver from freescale on my radar, it's been posted
and reviewed, I'd just like to get someone to give it a last look, so
maybe I'll send it or maybe I'll leave it.
There is no major nouveau changes in here, Ben was working on
something big, and we agreed it was a bit late, there wasn't anything
else he considered urgent to merge.
There might be another msm pull for some bits that are waiting on
arm-soc, I'll see how we time it.
This touches some "of" stuff, acks are in place except for the fixes
to the build in various configs,t hat I just applied.
Summary:
New drivers:
- virtio-gpu:
KMS only pieces of driver for virtio-gpu in qemu.
This is just the first part of this driver, enough to run
unaccelerated userspace on. As qemu merges more we'll start
adding the 3D features for the virgl 3d work.
- amdgpu:
a new driver from AMD to driver their newer GPUs. (VI+)
It contains a new cleaner userspace API, and is a clean
break from radeon moving forward, that AMD are going to
concentrate on. It also contains a set of register headers
auto generated from AMD internal database.
core:
- atomic modesetting API completed, enabled by default now.
- Add support for mode_id blob to atomic ioctl to complete interface.
- bunch of Displayport MST fixes
- lots of misc fixes.
panel:
- new simple panels
- fix some long-standing build issues with bridge drivers
radeon:
- VCE1 support
- add a GPU reset counter for userspace
- lots of fixes.
amdkfd:
- H/W debugger support module
- static user-mode queues
- support killing all the waves when a process terminates
- use standard DECLARE_BITMAP
i915:
- Add Broxton support
- S3, rotation support for Skylake
- RPS booting tuning
- CPT modeset sequence fixes
- ns2501 dither support
- enable cmd parser on haswell
- cdclk handling fixes
- gen8 dynamic pte allocation
- lots of atomic conversion work
exynos:
- Add atomic modesetting support
- Add iommu support
- Consolidate drm driver initialization
- and MIC, DECON and MIPI-DSI support for exynos5433
omapdrm:
- atomic modesetting support (fixes lots of things in rewrite)
tegra:
- DP aux transaction fixes
- iommu support fix
msm:
- adreno a306 support
- various dsi bits
- various 64-bit fixes
- NV12MT support
rcar-du:
- atomic and misc fixes
sti:
- fix HDMI timing complaince
tilcdc:
- use drm component API to access tda998x driver
- fix module unloading
qxl:
- stability fixes"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (872 commits)
drm/nouveau: Pause between setting gpu to D3hot and cutting the power
drm/dp/mst: close deadlock in connector destruction.
drm: Always enable atomic API
drm/vgem: Set unique to "vgem"
of: fix a build error to of_graph_get_endpoint_by_regs function
drm/dp/mst: take lock around looking up the branch device on hpd irq
drm/dp/mst: make sure mst_primary mstb is valid in work function
of: add EXPORT_SYMBOL for of_graph_get_endpoint_by_regs
ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi'
drm/atomic: Don't set crtc_state->enable manually
drm/exynos: dsi: do not set TE GPIO direction by input
drm/exynos: dsi: add support for MIC driver as a bridge
drm/exynos: dsi: add support for Exynos5433
drm/exynos: dsi: make use of array for clock access
drm/exynos: dsi: make use of driver data for static values
drm/exynos: dsi: add macros for register access
drm/exynos: dsi: rename pll_clk to sclk_clk
drm/exynos: mic: add MIC driver
of: add helper for getting endpoint node of specific identifiers
drm/exynos: add Exynos5433 decon driver
...
A safer way to update the PDPx registers is sending lri commands, added
in the ring before the batchbuffer start. Otherwise, the ctx must be idle
before trying to change anything (but the ring-tail) in the ctx image. An
example where the ctx won't be idle is lite-restore.
This patch depends on 5b7e4c9ce ("drm/i915/gtt: Mark TLBS dirty for gen8+").
v2: Combine lri writes (and save 8 commands). (Mika)
v3: Rebase after ring/req changes, and removed references to deprecated patches.
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The legacy mode mm switch and the execlist context assignment
needs dma address for the page directories.
Introduce a function that encapsulates the scratch_pd dma
fallback if no pd is found.
v2: Rebase, s/ring/req
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In Indirect context w/a batch buffer,
WaClearSlmSpaceAtContextSwitch
This WA performs writes to scratch page so it must be valid, this check
is performed before initializing the batch with this WA.
v2: s/PIPE_CONTROL_FLUSH_RO_CACHES/PIPE_CONTROL_FLUSH_L3 (Ville)
v3: GTT bit in scratch address should be mbz (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To initialize WA batch, at the moment we first allocate batch and then check
whether we have any WA to be initialized for the given Gen; if we don't have
any WA then we WARN the user, destroy the batch and return but this is causing
another WARN in cleanup code complaining about sleeping in atomic context.
Till we understand this better and to keep things simpler, bail out early
if we don't have WA.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Kernel 0-day framework reported warnings with WA batch patches, this patch
fixes those warnings and an additional warning reported in intel_lrc.c file.
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A bunch of the low level LRC functions were passing around ringbuf and ctx
pairs. In a few cases, they took the r/c pair and a request as well. This is all
quite messy and unnecesary. The context_queue() call is especially bad since the
fake request code got removed - it takes a request and three extra things that
must be extracted from the request and then it checks them against what it finds
in the request. Removing all the derivable data makes the code much simpler all
round.
This patch updates those functions to just take the request structure.
Note that logical_ring_wait_for_space now takes a request structure but already
had a local request pointer that it uses to scan for something to wait on. To
avoid confusion the local variable has been renamed 'target' (it is searching
for a target request to do something with) and the parameter has been called req
(to guarantee anything accidentally missed gets a compiler error).
v2: Updated commit message re wait_for_space (Tomas Elf review comment).
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The LRC submission code requires a request for tracking purposes. It does not
actually require that request to 'complete' it simply uses it for keeping hold
of reference counts on contexts and such like.
Previously, the fall back path of polling for space in the ring would start by
submitting any outstanding work that was sat in the buffer. This submission was
not done as part of the request that that work was owned by because that would
lead to complications with the request being submitted twice. Instead, a null
request structure was passed in to the submit call and a fake one was created.
That fall back path has long since been obsoleted and has now been removed. Thus
there is never any need to fake up a request structure. This patch removes that
code. A couple of sanity check warnings are added as well, just in case.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The outstanding_lazy_request is no longer used anywhere in the driver.
Everything that was looking at it now has a request explicitly passed in from on
high. Everything that was relying upon it behind the scenes is now explicitly
creating/passing/submitting its own private request. Thus the OLR can be
removed.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that the *_ring_begin() functions no longer call the request allocation
code, it is finally safe for the request allocation code to call *_ring_begin().
This is important to guarantee that the space reserved for the subsequent
i915_add_request() call does actually get reserved.
v2: Renamed functions according to review feedback (Tomas Elf).
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that everything above has been converted to use requests,
intel_logical_ring_begin() can be updated to take a request instead of a
ringbuf/context pair. This also means that it no longer needs to lazily allocate
a request if no-one happens to have done it earlier.
Note that this change makes the execlist signature the same as the legacy
version. Thus the two functions could be merged into a ring->begin() wrapper if
required.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Updated the ring->emit_bb_start() implementation to take a request instead of a
ringbuf/context pair.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Updated the ring->emit_request() implementation to take a request instead of a
ringbuf/request pair. Also removed its use of the OLR for obtaining the
request's seqno.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Updated the various ring->emit_flush() implementations to take a request instead
of a ringbuf/context pair.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Updated the *_ring_flush_all_caches() functions to take requests instead of
rings or ringbuf/context pairs.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Updated the *_ring_workarounds_emit() functions to take requests instead of
ring/context pairs.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Updated *_ring_invalidate_all_caches(), i915_reset_gen7_sol_offsets() and
i915_emit_box() to take request structures instead of ring or ringbuf/context
pairs.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that everything above has been converted to use request structures, it is
possible to update the lower level move_to_active() functions to be request
based as well.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that all callers of i915_add_request() have a request pointer to hand, it is
possible to update the add request function to take a request pointer rather
than pulling it out of the OLR.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The plan is to pass requests around as the basic submission tracking structure
rather than rings and contexts. This patch updates the i915_gem_object_sync()
code path.
v2: Much more complex patch to share a single request between the sync and the
page flip. The _sync() function now supports lazy allocation of the request
structure. That is, if one is passed in then that will be used. If one is not,
then a request will be allocated and passed back out. Note that the _sync() code
does not necessarily require a request. Thus one will only be created until
certain situations. The reason the lazy allocation must be done within the
_sync() code itself is because the decision to need one or not is not really
something that code above can second guess (except in the case where one is
definitely not required because no ring is passed in).
The call chains above _sync() now support passing a request through which most
callers passing in NULL and assuming that no request will be required (because
they also pass in NULL for the ring and therefore can't be generating any ring
code).
The exeception is intel_crtc_page_flip() which now supports having a request
returned from _sync(). If one is, then that request is shared by the page flip
(if the page flip is of a type to need a request). If _sync() does not generate
a request but the page flip does need one, then the page flip path will create
its own request.
v3: Updated comment description to be clearer about 'to_req' parameter (Tomas
Elf review request). Rebased onto newer tree that significantly changed the
synchronisation code.
v4: Updated comments from review feedback (Tomas Elf)
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Updated the two render_state_init() functions to take a request pointer instead
of a ring. This removes their reliance on the OLR.
v2: Rebased to newer tree.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that everything above has been converted to use requests, it is possible to
update init_context() to take a request pointer instead of a ring/context pair.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In execlist mode, context initialisation is deferred until first use of the
given context. This is because execlist mode has per ring context state and thus
many more context storage objects than legacy mode and many are never actually
used. Previously, the initialisation commands were written to the ring and
tagged with some random request structure via the OLR. This seemed to be causing
a null pointer deference bug under certain circumstances (BZ:88865).
This patch adds explicit request creation and submission to the deferred
initialisation code path. Thus removing any reliance on or randomness caused by
the OLR.
Note that it should be possible to move the deferred context creation until even
later - when the context is actually switched to rather than when it is merely
validated. This would allow the initialisation to be done within the request of
the work that is wanting to use the context. Hence, the extra request that is
created, used and retired just for the context init could be removed completely.
However, this is left for a follow up patch.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that a single per ring loop is being done for all the different
intialisation steps in i915_gem_init_hw(), it is possible to add proper request
management as well. The last remaining issue is that the context enable call
eventually ends up within *_render_state_init() and this does its own private
_i915_add_request() call.
This patch adds explicit request creation and submission to the top level loop
and removes the add_request() from deep within the sub-functions.
v2: Updated for removal of batch_obj from add_request call in previous patch.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The render state initialisation code does an explicit i915_add_request() call to
commit the init commands. It was passing in the initialisation batch buffer to
add_request() as the batch object parameter. However, the batch object entry in
the request structure (which is all that parameter is used for) is meant for
keeping track of user generated batch buffers for blame tagging during GPU
hangs.
This patch clears the batch object parameter so that kernel generated batch
buffers are not tagged as being user generated.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In order to explcitly track all GPU work (and completely remove the outstanding
lazy request), it is necessary to add extra i915_add_request() calls to various
places. Some of these do not need the implicit cache flush done as part of the
standard batch buffer submission process.
This patch adds a flag to _add_request() to specify whether the flush is
required or not.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The plan is to pass requests around as the basic submission tracking structure
rather than rings and contexts. This patch updates the
execbuffer_move_to_active() code path.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The plan is to pass requests around as the basic submission tracking structure
rather than rings and contexts. This patch updates the move_to_gpu() code paths.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Updated a couple of trace points to use the now cached request pointer rather
than extracting it from the ring.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The alloc_request() function does not actually return the newly allocated
request. Instead, it must be pulled from ring->outstanding_lazy_request. This
patch fixes this so that code can create a request and start using it knowing
exactly which request it actually owns.
v2: Updated for new i915_gem_request_alloc() scheme.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shrunk the parameter list of i915_gem_execbuffer_retire_commands() to a single
structure as everything it requires is available in the execbuff_params object.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The do_execbuf() function takes quite a few parameters. The actual set of
parameters is going to change with the conversion to passing requests around.
Further, it is due to grow massively with the arrival of the GPU scheduler.
This patch simplifies the prototype by passing a parameter structure instead.
Changing the parameter set in the future is then simply a matter of
adding/removing items to the structure.
Note that the structure does not contain absolutely everything that is passed
in. This is because the intention is to use this structure more extensively
later in this patch series and more especially in the GPU scheduler that is
coming soon. The latter requires hanging on to the structure as the final
hardware submission can be delayed until long after the execbuf IOCTL has
returned to user land. Thus it is unsafe to put anything in the structure that
is local to the IOCTL call itself - such as the 'args' parameter. All entries
must be copies of data or pointers to structures that are reference counted in
some way and guaranteed to exist for the duration of the batch buffer's life.
v2: Rebased to newer tree and updated for changes to the command parser.
Specifically, a code shuffle has required saving the batch start address in the
params structure.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In execlist mode, the context object pointer is written in to the request
structure (and reference counted) at the point of request creation. In legacy
mode, this only happens inside i915_add_request().
This patch updates the legacy code path to match the execlist version. This
allows all the intermediate code between request creation and request submission
to get at the context object given only a request structure. Thus negating the
need to pass context pointers here, there and everywhere.
v2: Moved the context reference so it does not need to be undone if the
get_seqno() fails.
v3: Fixed execlist mode always hitting a warning about invalid last_contexts
(which don't exist in execlist mode).
v4: Updated for new i915_gem_request_alloc() scheme.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The i915_add_request() function is called to keep track of work that has been
written to the ring buffer. It adds epilogue commands to track progress (seqno
updates and such), moves the request structure onto the right list and other
such house keeping tasks. However, the work itself has already been written to
the ring and will get executed whether or not the add request call succeeds. So
no matter what goes wrong, there isn't a whole lot of point in failing the call.
At the moment, this is fine(ish). If the add request does bail early on and not
do the housekeeping, the request will still float around in the
ring->outstanding_lazy_request field and be picked up next time. It means
multiple pieces of work will be tagged as the same request and driver can't
actually wait for the first piece of work until something else has been
submitted. But it all sort of hangs together.
This patch series is all about removing the OLR and guaranteeing that each piece
of work gets its own personal request. That means that there is no more
'hoovering up of forgotten requests'. If the request does not get tracked then
it will be leaked. Thus the add request call _must_ not fail. The previous patch
should have already ensured that it _will_ not fail by removing the potential
for running out of ring space. This patch enforces the rule by actually removing
the early exit paths and the return code.
Note that if something does manage to fail and the epilogue commands don't get
written to the ring, the driver will still hang together. The request will be
added to the tracking lists. And as in the old case, any subsequent work will
generate a new seqno which will suffice for marking the old one as complete.
v2: Improved WARNings (Tomas Elf review request).
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It is a bad idea for i915_add_request() to fail. The work will already have been
send to the ring and will be processed, but there will not be any tracking or
management of that work.
The only way the add request call can fail is if it can't write its epilogue
commands to the ring (cache flushing, seqno updates, interrupt signalling). The
reasons for that are mostly down to running out of ring buffer space and the
problems associated with trying to get some more. This patch prevents that
situation from happening in the first place.
When a request is created, it marks sufficient space as reserved for the
epilogue commands. Thus guaranteeing that by the time the epilogue is written,
there will be plenty of space for it. Note that a ring_begin() call is required
to actually reserve the space (and do any potential waiting). However, that is
not currently done at request creation time. This is because the ring_begin()
code can allocate a request. Hence calling begin() from the request allocation
code would lead to infinite recursion! Later patches in this series remove the
need for begin() to do the allocate. At that point, it becomes safe for the
allocate to call begin() and really reserve the space.
Until then, there is a potential for insufficient space to be available at the
point of calling i915_add_request(). However, that would only be in the case
where the request was created and immediately submitted without ever calling
ring_begin() and adding any work to that request. Which should never happen. And
even if it does, and if that request happens to fall down the tiny window of
opportunity for failing due to being out of ring space then does it really
matter because the request wasn't doing anything in the first place?
v2: Updated the 'reserved space too small' warning to include the offending
sizes. Added a 'cancel' operation to clean up when a request is abandoned. Added
re-initialisation of tracking state after a buffer wrap to keep the sanity
checks accurate.
v3: Incremented the reserved size to accommodate Ironlake (after finally
managing to run on an ILK system). Also fixed missing wrap code in LRC mode.
v4: Added extra comment and removed duplicate WARN (feedback from Tomas).
For: VIZ-5115
CC: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In Indirect context w/a batch buffer,
+WaFlushCoherentL3CacheLinesAtContextSwitch:bdw
v2: Add LRI commands to set/reset bit that invalidates coherent lines,
update WA to include programming restrictions and exclude CHV as
it is not required (Ville)
v3: Avoid unnecessary read when it can be done by reading register once (Chris).
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In Indirect and Per context w/a batch buffer,
+WaDisableCtxRestoreArbitration
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some of the WA applied using WA batch buffers perform writes to scratch page.
In the current flow WA are initialized before scratch obj is allocated.
This patch reorders intel_init_pipe_control() to have a valid scratch obj
before we initialize WA.
v2: Check for valid scratch page before initializing WA as some of them
perform writes to it.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some of the WA are to be applied during context save but before restore and
some at the end of context save/restore but before executing the instructions
in the ring, WA batch buffers are created for this purpose and these WA cannot
be applied using normal means. Each context has two registers to load the
offsets of these batch buffers. If they are non-zero, HW understands that it
need to execute these batches.
v1: In this version two separate ring_buffer objects were used to load WA
instructions for indirect and per context batch buffers and they were part
of every context.
v2: Chris suggested to include additional page in context and use it to load
these WA instead of creating separate objects. This will simplify lot of things
as we need not explicity pin/unpin them. Thomas Daniel further pointed that GuC
is planning to use a similar setup to share data between GuC and driver and
WA batch buffers can probably share that page. However after discussions with
Dave who is implementing GuC changes, he suggested to use an independent page
for the reasons - GuC area might grow and these WA are initialized only once and
are not changed afterwards so we can share them share across all contexts.
The page is updated with WA during render ring init. This has an advantage of
not adding more special cases to default_context.
We don't know upfront the number of WA we will applying using these batch buffers.
For this reason the size was fixed earlier but it is not a good idea. To fix this,
the functions that load instructions are modified to report the no of commands
inserted and the size is now calculated after the batch is updated. A macro is
introduced to add commands to these batch buffers which also checks for overflow
and returns error.
We have a full page dedicated for these WA so that should be sufficient for
good number of WA, anything more means we have major issues.
The list for Gen8 is small, same for Gen9 also, maybe few more gets added
going forward but not close to filling entire page. Chris suggested a two-pass
approach but we agreed to go with single page setup as it is a one-off routine
and simpler code wins.
One additional option is offset field which is helpful if we would like to
have multiple batches at different offsets within the page and select them
based on some criteria. This is not a requirement at this point but could
help in future (Dave).
Chris provided some helpful macros and suggestions which further simplified
the code, they will also help in reducing code duplication when WA for
other Gen are added. Add detailed comments explaining restrictions.
Use do {} while(0) for wa_ctx_emit() macro.
(Many thanks to Chris, Dave and Thomas for their reviews and inputs)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Rafael Barbalho <rafael.barbalho@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
After GPU reset, HW is losing the address of HWS page in the register.
The page itself is valid except that HW is not aware of its location.
[ 64.368623] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000
[ 64.368655] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000
[ 64.368681] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000
[ 64.368704] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000
This patch reloads this value into the register during ring init.
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
commit 53292cdb06 ("drm/i915: Workaround
to avoid lite restore with HEAD==TAIL") added a check for req0 != null
which is unnecessary.
The only way req0 could be null is if the list was empty, and this is
already addressed at the beginning of execlists_context_unqueue().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This trims a little overhead from the common case of not needing to
synchronize between rings.
v2: execlists is special and likes to duplicate code.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently, we only track the last request globally across all engines.
This prevents us from issuing concurrent read requests on e.g. the RCS
and BCS engines (or more likely the render and media engines). Without
semaphores, we incur costly stalls as we synchronise between rings -
greatly impacting the current performance of Broadwell versus Haswell in
certain workloads (like video decode). With the introduction of
reference counted requests, it is much easier to track the last request
per ring, as well as the last global write request so that we can
optimise inter-engine read read requests (as well as better optimise
certain CPU waits).
v2: Fix inverted readonly condition for nonblocking waits.
v3: Handle non-continguous engine array after waits
v4: Rebase, tidy, rewrite ring list debugging
v5: Use obj->active as a bitfield, it looks cool
v6: Micro-optimise, mostly involving moving code around
v7: Fix retire-requests-upto for execlists (and multiple rq->ringbuf)
v8: Rebase
v9: Refactor i915_gem_object_sync() to allow the compiler to better
optimise it.
Benchmark: igt/gem_read_read_speed
hsw:gt3e (with semaphores):
Before: Time to read-read 1024k: 275.794µs
After: Time to read-read 1024k: 123.260µs
hsw:gt3e (w/o semaphores):
Before: Time to read-read 1024k: 230.433µs
After: Time to read-read 1024k: 124.593µs
bdw-u (w/o semaphores): Before After
Time to read-read 1x1: 26.274µs 10.350µs
Time to read-read 128x128: 40.097µs 21.366µs
Time to read-read 256x256: 77.087µs 42.608µs
Time to read-read 512x512: 281.999µs 181.155µs
Time to read-read 1024x1024: 1196.141µs 1118.223µs
Time to read-read 2048x2048: 5639.072µs 5225.837µs
Time to read-read 4096x4096: 22401.662µs 21137.067µs
Time to read-read 8192x8192: 89617.735µs 85637.681µs
Testcase: igt/gem_concurrent_blit (read-read and friends)
Cc: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v8]
[danvet: s/\<rq\>/req/g]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If an batch ends while the IRQs are not turned on the notification can
go missing and the GPU can hang. So generate a warning in this case.
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We switched from calling i915_gem_alloc_context_obj() to calling
i915_gem_alloc_object() so the error handling needs to be updated to
check for NULL instead of IS_ERR().
Fixes: 149c86e74f ('drm/i915: Allocate context objects from stolen')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm-intel-next-2015-04-23:
- dither support for ns2501 dvo (Thomas Richter)
- some polish for the gtt code and fixes to finally enable the cmd parser on hsw
- first pile of bxt stage 1 enabling (too many different people to list ...)
- more psr fixes from Rodrigo
- skl rotation support from Chandra
- more atomic work from Ander and Matt
- pile of cleanups and micro-ops for execlist from Chris
drm-intel-next-2015-04-10:
- cdclk handling cleanup and fixes from Ville
- more prep patches for olr removal from John Harrison
- gmbus pin naming rework from Jani (prep for bxt)
- remove ->new_config from Ander (more atomic conversion work)
- rps (boost) tuning and unification with byt/bsw from Chris
- cmd parser batch bool tuning from Chris
- gen8 dynamic pte allocation (Michel Thierry, based on work from Ben Widawsky)
- execlist tuning (not yet all of it) from Chris
- add drm_plane_from_index (Chandra)
- various small things all over
* tag 'drm-intel-next-2015-04-23-fixed' of git://anongit.freedesktop.org/drm-intel: (204 commits)
drm/i915/gtt: Allocate va range only if vma is not bound
drm/i915: Enable cmd parser to do secure batch promotion for aliasing ppgtt
drm/i915: fix intel_prepare_ddi
drm/i915: factor out ddi_get_encoder_port
drm/i915/hdmi: check port in ibx_infoframe_enabled
drm/i915/hdmi: fix vlv infoframe port check
drm/i915: Silence compiler warning in dvo
drm/i915: Update DRIVER_DATE to 20150423
drm/i915:Â Enable dithering on NatSemi DVO2501 for Fujitsu S6010
rm/i915: Move i915_get_ggtt_vma_pages into ggtt_bind_vma
drm/i915: Don't try to outsmart gcc in i915_gem_gtt.c
drm/i915: Unduplicate i915_ggtt_unbind/bind_vma
drm/i915: Move ppgtt_bind/unbind around
drm/i915: move i915_gem_restore_gtt_mappings around
drm/i915: Fix up the vma aliasing ppgtt binding
drm/i915: Remove misleading comment around bind_to_vm
drm/i915: Don't use atomics for pg_dirty_rings
drm/i915: Don't look at pg_dirty_rings for aliasing ppgtt
drm/i915/skl: Support Y tiling in MMIO flips
drm/i915: Fixup kerneldoc for struct intel_context
...
Conflicts:
drivers/gpu/drm/i915/i915_drv.c
WaIdleLiteRestore is an execlists-only workaround, and requires the driver
to ensure that any context always has HEAD!=TAIL when attempting lite
restore.
Add two extra MI_NOOP instructions at the end of each request, but keep
the requests tail pointing before the MI_NOOPs. We may not need to
executed them, and this is why request->tail is sampled before adding
these extra instructions.
If we submit a context to the ELSP which has previously been submitted,
move the tail pointer past the MI_NOOPs. This ensures HEAD!=TAIL.
v2: Move overallocation to gen8_emit_request, and added note about
sampling request->tail in commit message (Chris).
v3: Remove redundant request->tail assignment in __i915_add_request, in
lrc mode this is already set in execlists_context_queue.
Do not add wa implementation details inside gem (Chris).
v4: Apply the wa whenever the req has been resubmitted and update
comment (Chris).
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Separate topic branch for bxt didn't work out since we needed to
refactor the gmbus code a bit to make it look decent. So backmerge.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
On GEN9+ per specification a NULL PIPE_CONTROL needs to be emitted
before any PIPE_CONTROL command with the VS_INVALIDATE flag set.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
After commit d7b9ca2f7a
("drm/i915: Remove request->uniq")
dev_priv is no longer needed.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As we never expose context objects directly to userspace, we can forgo
allocating a first-class GEM object for them and prefer to use the
limited resource of reserved/stolen memory for them. Note this means
that their initial contents are undefined.
However, a downside of using stolen objects for execlists is that we
cannot access the physical address directly (thanks MCH!) which prevents
their use.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We already assign a unique identifier to every request: seqno. That
someone felt like adding a second one without even mentioning why and
tweaking ABI smells very fishy.
Fixes regression from
commit b3a38998f0
Author: Nick Hoath <nicholas.hoath@intel.com>
Date: Thu Feb 19 16:30:47 2015 +0000
drm/i915: Fix a use after free, and unbalanced refcounting
v2: Rebase
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nick Hoath <nicholas.hoath@intel.com>
Cc: Thomas Daniel <thomas.daniel@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
[danvet: Fixup because different merge order.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This eliminates six needless spin lock/unlock pairs when writing out
ELSP.
v2: Respin with my preferred colour.
v3: Mostly back to the original colour
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> [v1]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
After the removal of DRI1, all access to the rings are through requests
and so we can always be sure that there is a request to wait upon to
free up available space. The fallback code only existed so that we could
quiesce the GPU following unmediated access by DRI1.
v2: Rebase
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When we submit a request to the GPU, we first take the rpm wakelock, and
only release it once the GPU has been idle for a small period of time
after all requests have been complete. This means that we are sure no
new interrupt can arrive whilst we do not hold the rpm wakelock and so
can drop the individual get/put around every single request inside
execlists.
Note: to close one potential issue we should mark the GPU as busy
earlier in __i915_add_request.
To elaborate: The issue is that we emit the irq signalling sequence
before we grab the rpm reference, which means we could miss the
resulting interrupt (since that's not set up when suspended). The only
bad side effect is a missed interrupt, gt mmio writes automatically
wake up the hw itself. But otoh we have an umbrella rpm reference for
the entirety of execbuf, as long as that's there we're covered.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Explain a bit more about the add_request issue, which after
some irc chatting with Chris turns out to not be an issue really.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We can use the simpler spinlock form to disable interrupts as we are
always outside of an irq/softirq handler.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This finishes off the dynamic page tables allocations, in the legacy 3
level style that already exists. Most everything has already been setup
to this point, the patch finishes off the enabling by setting the
appropriate function pointers.
In LRC mode, contexts need to know the PDPs when they are populated. With
dynamic page table allocations, these PDPs may not exist yet. Check if
PDPs have been allocated and use the scratch page if they do not exist yet.
Before submission, update the PDPs in the logic ring context as PDPs
have been allocated.
v2: Update aliasing/true ppgtt allocate/teardown/clear functions for
gen 6 & 7.
v3: Rebase.
v4: Remove BUG() from ppgtt_unbind_vma, but keep checking that either
teardown_va_range or clear_range functions exist (Daniel).
v5: Similar to gen6, in init, gen8_ppgtt_clear_range call is only needed
for aliasing ppgtt. Zombie tracking was originally added for teardown
function and is no longer required.
v6: Update err_out case in gen8_alloc_va_range (missed from lastest
rebase).
v7: Rebase after s/page_tables/page_table/.
v8: Updated scratch_pt check after scratch flag was removed in previous
patch.
v9: Note that lrc mode needs to be updated to support init state without
any PDP.
v10: Unmap correct page_table in gen8_alloc_va_range's error case, clean-up
gen8_aliasing_ppgtt_init (remove duplicated map), and initialize PTs
during page table allocation.
v11: Squashed LRC enabling commit, otherwise LRC mode would be left broken
until it was updated to handle the init case without any PDP.
v12: Do not overallocate new_pts bitmap, make alloc_gen8_temp_bitmaps
static and don't abuse of inline functions. (Mika)
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When we do dynamic page table allocations for gen8, we'll need to have
more control over how and when we map page tables, similar to gen6.
In particular, DMA mappings for page directories/tables occur at allocation
time.
This patch adds the functionality and calls it at init, which should
have no functional change.
The PDPEs are still a special case for now. We'll need a function for
that in the future as well.
v2: Handle renamed unmap_and_free_page functions.
v3: Updated after teardown_va logic was removed.
v4: Rebase after s/page_tables/page_table/.
v5: No longer allocate all PDPs in GEN8+ systems with less than 4GB of
memory, and update populate_lr_context to handle this new case (proper
tracking will be added later in the patch series).
v6: Assign lrc page directory pointer addresses using a macro. (Mika)
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I woke up one morning and found 50k objects sitting in the batch pool
and every search seemed to iterate the entire list... Painting the
screen in oils would provide a more fluid display.
One issue with the current design is that we only check for retirements
on the current ring when preparing to submit a new batch. This means
that we can have thousands of "active" batches on another ring that we
have to walk over. The simplest way to avoid that is to split the pools
per ring and then our LRU execution ordering will also ensure that the
inactive buffers remain at the front.
v2: execlists still requires duplicate code.
v3: execlists requires more duplicate code
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
According to Spec this is a reserved bit for Gen9+ and should not be set.
Change-Id: I0215fb7057b94139b7a2f90ecc7a0201c0c93ad4
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The legacy and LRC code paths have an almost identical procedure for waiting for
space in the ring buffer. They both search for a request in the free list that
will advance the tail to a point where sufficient space is available. They then
wait for that request, retire it and recalculate the free space value.
Unfortunately, a bug in the LRC side meant that the resulting free space might
not be as large as expected and indeed, might not be sufficient. This is because
it was testing against the value of request->tail not request->postfix. Whereas,
when a request is retired, ringbuf->tail is updated to req->postfix not
req->tail.
Another significant difference between the two is that the LRC one did not trust
the wait for request to work! It redid the is there enough space available test
and would fail the call if insufficient. Whereas, the legacy version just said
'return 0' - it assumed the preceeding code works. This difference meant that
the LRC version still worked even with the bug - it just fell back to the
polling wait path.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The request allocation code is largely duplicated between legacy mode and
execlist mode. The actual difference between the two versions of the code is
pretty minimal.
This patch moves the common code out into a separate function. This is then
called by the execution specific version prior to setting up the one different
value.
For: VIZ-5190
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The only usage of intel_logical_ring_begin() is within intel_lrc.c so it can be
made static. To avoid a forward declaration at the top of the file, it and bunch
of other functions have been shuffled upwards.
For: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tomas Elf <tomas.elf@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU/NacAAoJEHm+PkMAQRiGdUcIAJU5dHclwd9HRc7LX5iOwYN6
mN0aCsYjMD8Pjx2VcPCgJvkIoESQO5pkwYpFFWCwILup1bVEidqXfr8EPOdThzdh
kcaT0FwUvd19K+0jcKVNCX1RjKBtlUfUKONk6sS2x4RrYZpv0Ur8Gh+yXV8iMWtf
fAusNEYlxQJvEz5+NSKw86EZTr4VVcykKLNvj+/t/JrXEuue7IG8EyoAO/nLmNd2
V/TUKKttqpE6aUVBiBDmcMQl2SUVAfp5e+KJAHmizdDpSE80nU59UC1uyV8VCYdM
qwHXgttLhhKr8jBPOkvUxl4aSXW7S0QWO8TrMpNdEOeB3ZB8AKsiIuhe1JrK0ro=
=Xkue
-----END PGP SIGNATURE-----
Merge tag 'v4.0-rc3' into drm-next
Linux 4.0-rc3 backmerge to fix two i915 conflicts, and get
some mainline bug fixes needed for my testing box
Conflicts:
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/intel_display.c
- Y tiling support for scanout from Tvrtko&Damien
- Remove more UMS support
- some small prep patches for OLR removal from John Harrison
- first few patches for dynamic pagetable allocation from Ben Widawsky, rebased
by tons of other people
- DRRS support patches (Sonika&Vandana)
- fbc patches from Paulo
- make sure our vblank callbacks aren't called when the pipes are off
- various patches all over
* tag 'drm-intel-next-2015-02-27' of git://anongit.freedesktop.org/drm-intel: (61 commits)
drm/i915: Update DRIVER_DATE to 20150227
drm/i915: Clarify obj->map_and_fenceable
drm/i915/skl: Allow Y (and Yf) frame buffer creation
drm/i915/skl: Update watermarks for Y tiling
drm/i915/skl: Updated watermark programming
drm/i915/skl: Adjust get_plane_config() to support Yb/Yf tiling
drm/i915/skl: Teach pin_and_fence_fb_obj() about Y tiling constraints
drm/i915/skl: Adjust intel_fb_align_height() for Yb/Yf tiling
drm/i915/skl: Allow scanning out Y and Yf fbs
drm/i915/skl: Add new displayable tiling formats
drm/i915: Remove DRIVER_MODESET checks from modeset code
drm/i915: Remove regfile code&data for UMS suspend/resume
drm/i915: Remove DRIVER_MODESET checks from gem code
drm/i915: Remove DRIVER_MODESET checks in the gpu reset code
drm/i915: Remove DRIVER_MODESET checks from suspend/resume code
drm/i915: Remove DRIVER_MODESET checks in load/unload/close code
drm/i915: fix a printk format
drm/i915: Add media rc6 residency file to sysfs
drm/i915: Add missing description to parameter in alloc_pt_range
drm/i915: Removed the read of RP_STATE_CAP from sysfs/debugfs functions
...
- use the atomic helpers for plane_upate/disable hooks (Matt Roper)
- refactor the initial plane config code (Damien)
- ppgtt prep patches for dynamic pagetable alloc (Ben Widawsky, reworked and
rebased by a lot of other people)
- framebuffer modifier support from Tvrtko Ursulin, drm core code from Rob Clark
- piles of workaround patches for skl from Damien and Nick Hoath
- vGPU support for xengt on the client side (Yu Zhang)
- and the usual smaller things all over
* tag 'drm-intel-next-2015-02-14' of git://anongit.freedesktop.org/drm-intel: (88 commits)
drm/i915: Update DRIVER_DATE to 20150214
drm/i915: Remove references to previously removed UMS config option
drm/i915/skl: Use a LRI for WaDisableDgMirrorFixInHalfSliceChicken5
drm/i915/skl: Fix always true comparison in a revision id check
drm/i915/skl: Implement WaEnableLbsSlaRetryTimerDecrement
drm/i915/skl: Implement WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken
drm/i915: Add process identifier to requests
drm/i915/skl: Implement WaBarrierPerformanceFixDisable
drm/i915/skl: Implement WaCcsTlbPrefetchDisable:skl
drm/i915/skl: Implement WaDisableChickenBitTSGBarrierAckForFFSliceCS
drm/i915/skl: Implement WaDisableHDCInvalidation
drm/i915/skl: Implement WaDisableLSQCROPERFforOCL
drm/i915/skl: Implement WaDisablePartialResolveInVc
drm/i915/skl: Introduce a SKL specific init_workarounds()
drm/i915/skl: Document that we implement WaRsClearFWBitsAtReset
drm/i915/skl: Implement WaSetGAPSunitClckGateDisable
drm/i915/skl: Make the init clock gating function skylake specific
drm/i915/skl: Provide a gen9 specific init_render_ring()
drm/i915/skl: Document the WM read latency W/A with its name
drm/i915/skl: Also detect eDRAM on SKL
...
In execlist mode, the ringbuf is a function of the ring and context whereas in
legacy mode, it is derived from the ring alone. Thus the calculation required to
determine the ringbuf pointer from the ring (and context) also needs to test
execlist mode or not. This is messy.
Further, the request structure holds a pointer to both the ring and the context
for which it was created. Thus, given a request, it is possible to derive the
ringbuf in either legacy or execlist mode. Hence it is necessary to pass just
the request in to all the low level functions rather than some combination of
request, ring, context and ringbuf. However, rather than recalculating it each
time, it is much simpler to just cache the ringbuf pointer in the request
structure itself.
Caching the pointer means the calculation is done once at request creation time
and all further code and simply read it directly from the request structure.
OTC-Jira: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
[danvet: Drop contentless comment in lrc alloc request entirely. And
spelling fix in the commit message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is a trace point in the legacy execbuffer execution path that is missing
from the execlist path. Trace points are extremely useful for debugging and are
used by various automated validation tests. Hence, this patch adds the missing
trace point back in.
OTC-Jira: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is a flags word that is passed through the execbuffer code path all the
way from initial decoding of the user parameters down to the very final dispatch
buffer call. It is simply called 'flags'. Unfortuantely, there are many other
flags words floating around in the same blocks of code. Even more once the GPU
scheduler arrives.
This patch makes it more obvious exactly which flags word is which by renaming
'flags' to 'dispatch_flags'. Note that the bit definitions for this flags word
already have an 'I915_DISPATCH_' prefix on them and so are not quite so
ambiguous.
OTC-Jira: VIZ-1587
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
[danvet: Resolve conflict with Chris' rework of the bb parsing.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As we move toward dynamic page table allocation, it becomes much easier
to manage our data structures if break do things less coarsely by
breaking up all of our actions into individual tasks. This makes the
code easier to write, read, and verify.
Aside from the dissection of the allocation functions, the patch
statically allocates the page table structures without a page directory.
This remains the same for all platforms,
The patch itself should not have much functional difference. The primary
noticeable difference is the fact that page tables are no longer
allocated, but rather statically declared as part of the page directory.
This has non-zero overhead, but things gain additional complexity as a
result.
This patch exists for a few reasons:
1. Splitting out the functions allows easily combining GEN6 and GEN8
code. Page tables have no difference based on GEN8. As we'll see in a
future patch when we add the DMA mappings to the allocations, it
requires only one small change to make work, and error handling should
just fall into place.
2. Unless we always want to allocate all page tables under a given PDE,
we'll have to eventually break this up into an array of pointers (or
pointer to pointer).
3. Having the discrete functions is easier to review, and understand.
All allocations and frees now take place in just a couple of locations.
Reviewing, and catching leaks should be easy.
4. Less important: the GFP flags are confined to one location, which
makes playing around with such things trivial.
v2: Updated commit message to explain why this patch exists
v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/
v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel)
v5: Added additional safety checks in gen8 clear/free/unmap.
v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika).
v7: Make err_out loop symmetrical to the way we allocate in
alloc_pt_range. Also s/page_tables/page_table and correct commit
message (Mika)
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move the remaining members over to the new page table structures.
This can be squashed with the previous commit if desire. The reasoning
is the same as that patch. I simply felt it is easier to review if split.
v2: In lrc: s/ppgtt->pd_dma_addr[i]/ppgtt->pdp.page_directory[i].daddr/
v3: Rebase.
v4: Rebased after s/page_tables/page_table/.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When converting from implicitly tracked execlist queue items to ref counted
requests, not all frees of requests were replaced with unrefs, and extraneous
refs/unrefs of contexts were added.
Correct the unbalanced refcount & replace the frees.
Remove a noisy warning when hitting the request creation path.
drm_i915_gem_request and intel_context are both kref reference counted
structures. Upon allocation, drm_i915_gem_request's ref count should be
bumped using kref_init. When a context is assigned to the request,
the context's reference count should be bumped using i915_gem_context_reference.
i915_gem_request_reference will reduce the context reference count when
the request is freed.
Problem introduced in
commit 6d3d8274bc
Author: Nick Hoath <nicholas.hoath@intel.com>
AuthorDate: Thu Jan 15 13:10:39 2015 +0000
drm/i915: Subsume intel_ctx_submit_request in to drm_i915_gem_request
v2: Added comments explaining how the ctx pointer and the request object should
be ref-counted. Removed noisy warning.
v3: Cleaned up the language used in the commit & the header
description (Thanks David Gordon)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88652
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Work was getting left behind in LRC contexts during reset. This causes a hang
if the GPU is reset when HEAD==TAIL because the context's ringbuffer head and
tail don't get reset and retiring a request doesn't alter them, so the ring
still appears full.
Added a function intel_lr_context_reset() to reset head and tail on a LRC and
its ringbuffer.
Call intel_lr_context_reset() for each context in i915_gem_context_reset() when
in execlists mode.
Testcase: igt/pm_rps --run-subtest reset #bdw
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88096
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
[danvet: Flatten control flow in the lrc reset code a notch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On Gen9 the render power gating can leave slice/subslice/EU in
a partially enabled state. We must make an explicit request for
full SSEU enablement through the Render Power Clock State
register when resuming render work. This register is save/
restored in the logical ring context image for execlist
submission mode. Initialize its value in each LRC image to
request full enablement according to the device SSEU config.
Thanks to Sharma Ankitprasad and Akash Goel for highlighting the
issue and proposing the initial fix on which this patch is based.
v2: Adjusted the names of the power gating support flags to fit
update of an earlier patch.
Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: "Akash Goel <akash.goel@intel.com>"
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
WaDisableAsyncFlipPerfMode isn't listed for SKL and
INSTPM_FORCE_ORDERING is MBZ so let's make a gen9 specific render init
function.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This function is only used in intel_lrc.c, so restrict it to that file. The
function was moved around to avoid a forward declaration and group it with its
user.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This function is only used in intel_lrc.c, so restrict it to that file. The
function was moved around to avoid a forward declaration and group it with its
user.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch introduces 2 bit definitions of context save/restore
control register.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Suggested-by: Dave Gordon <david.s.gordon@intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
