read_block_for_search() can be simplified as:
tmp = find_extent_buffer();
if (tmp)
return;
...
free_extent_buffer();
read_tree_block();
Apparently, @tmp must be NULL at this point, free_extent_buffer() is not
needed.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit dc2d3005d2 ("btrfs: remove dead create_space_info
calls"), there is only one caller btrfs_init_space_info. However, it
doesn't need create_space_info to return space_info at all.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As verify_level_key() is checked after verify_parent_transid(), i.e.
if (verify_parent_transid())
ret = -EIO;
else if (verify_level_key())
ret = -EUCLEAN;
if parent_transid is 0, verify_parent_transid() skips verifying
parent_transid and considers eb as valid, and if verify_level_key()
reports something wrong, we're not going to know if it's caused by
corrupted metadata or non-checkecd eb (e.g. stale eb).
The stale eb can be from an outdated raid1 mirror after a degraded
mount, see eg "btrfs: fix reading stale metadata blocks after degraded
raid1 mounts" (02a3307aa9) for more details.
@parent_transid is able to tell whether the eb's generation has been
verified by the caller.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Error message from qgroup_rescan_init() mostly looks like:
BTRFS info (device nvme0n1p1): qgroup_rescan_init failed with -115
Which is far from meaningful, and sometimes confusing as for above
-EINPROGRESS it's mostly (despite the init race) harmless, but sometimes
it can also indicate problem if the return value is -EINVAL.
Change it to some more meaningful messages like:
BTRFS info (device nvme0n1p1): qgroup rescan is already in progress
And
BTRFS err(device nvme0n1p1): qgroup rescan init failed, qgroup is not enabled
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ update the messages and level ]
Signed-off-by: David Sterba <dsterba@suse.com>
If we have invalid flags set, when we error out we must drop our writer
counter and free the buffer we allocated for the arguments. This bug is
trivially reproduced with the following program on 4.7+:
#include <fcntl.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <linux/btrfs.h>
#include <linux/btrfs_tree.h>
int main(int argc, char **argv)
{
struct btrfs_ioctl_vol_args_v2 vol_args = {
.flags = UINT64_MAX,
};
int ret;
int fd;
if (argc != 2) {
fprintf(stderr, "usage: %s PATH\n", argv[0]);
return EXIT_FAILURE;
}
fd = open(argv[1], O_WRONLY);
if (fd == -1) {
perror("open");
return EXIT_FAILURE;
}
ret = ioctl(fd, BTRFS_IOC_RM_DEV_V2, &vol_args);
if (ret == -1)
perror("ioctl");
close(fd);
return EXIT_SUCCESS;
}
When unmounting the filesystem, we'll hit the
WARN_ON(mnt_get_writers(mnt)) in cleanup_mnt() and also may prevent the
filesystem to be remounted read-only as the writer count will stay
lifted.
Fixes: 6b526ed70c ("btrfs: introduce device delete by devid")
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For inlined extent, we only have one segment, thus less things to check.
And further more, inlined extent always has the csum in its leaf header,
it's less probable to have corrupted data.
Anyway, still check header and segment header.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
James Harvey reported that some corrupted compressed extent data can
lead to various kernel memory corruption.
Such corrupted extent data belongs to inode with NODATASUM flags, thus
data csum won't help us detecting such bug.
If lucky enough, KASAN could catch it like:
BUG: KASAN: slab-out-of-bounds in lzo_decompress_bio+0x384/0x7a0 [btrfs]
Write of size 4096 at addr ffff8800606cb0f8 by task kworker/u16:0/2338
CPU: 3 PID: 2338 Comm: kworker/u16:0 Tainted: G O 4.17.0-rc5-custom+ #50
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Workqueue: btrfs-endio btrfs_endio_helper [btrfs]
Call Trace:
dump_stack+0xc2/0x16b
print_address_description+0x6a/0x270
kasan_report+0x260/0x380
memcpy+0x34/0x50
lzo_decompress_bio+0x384/0x7a0 [btrfs]
end_compressed_bio_read+0x99f/0x10b0 [btrfs]
bio_endio+0x32e/0x640
normal_work_helper+0x15a/0xea0 [btrfs]
process_one_work+0x7e3/0x1470
worker_thread+0x1b0/0x1170
kthread+0x2db/0x390
ret_from_fork+0x22/0x40
...
The offending compressed data has the following info:
Header: length 32768 (looks completely valid)
Segment 0 Header: length 3472882419 (obviously out of bounds)
Then when handling segment 0, since it's over the current page, we need
the copy the compressed data to temporary buffer in workspace, then such
large size would trigger out-of-bounds memory access, screwing up the
whole kernel.
Fix it by adding extra checks on header and segment headers to ensure we
won't access out-of-bounds, and even checks the decompressed data won't
be out-of-bounds.
Reported-by: James Harvey <jamespharvey20@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ updated comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Although it's not that complex, but such comment could still save
several minutes for newer reader/reviewer instead of inferring that from
the code.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor wording updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
Since compression.h is using the SZ_* macros, and if some file includes
only compression.h without linux/sizes.h, it will cause compile error.
One example is lzo.c, if it uses BTRFS_MAX_COMPRESSED. Fix it by adding
linux/sizes.h in compression.h
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_clone_files(), we must check the NODATASUM flag while the
inodes are locked. Otherwise, it's possible that btrfs_ioctl_setflags()
will change the flags after we check and we can end up with a party
checksummed file.
The race window is only a few instructions in size, between the if and
the locks which is:
3834 if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode))
3835 return -EISDIR;
where the setflags must be run and toggle the NODATASUM flag (provided
the file size is 0). The clone will block on the inode lock, segflags
takes the inode lock, changes flags, releases log and clone continues.
Not impossible but still needs a lot of bad luck to hit unintentionally.
Fixes: 0e7b824c4e ("Btrfs: don't make a file partly checksummed through file clone")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_exclude_logged_extents may call __exclude_logged_extent
which may fail.
Propagate the failures of __exclude_logged_extent to upper caller.
Signed-off-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of setting "parent" to ref->parent only when dealing with
a shared ref and subsequently performing another check to see
if (parent > 0), check the "node->type" directly and act accordingly.
This makes the code more streamline. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of taking only specific member of this structure, which results
in 2 extra arguments, just take the delayed_extent_op struct and
reference the arguments inside the functions. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function currently takes 7 parameters, most of which are proxies
for values from btrfs_delayed_ref_node struct which is not passed. This
patch simplifies the interface of the function by simply passing said
delayed ref node struct to the function. This enables us to:
1. Move locals variables and init code related to them from
run_delayed_tree_ref which should only be used inside
alloc_reserved_tree_block, such as skinny_metadata and the btrfs_key,
representing the extent being inserted. This removes the need for the
"ins" argument. Instead, it's replaced by a local var with a more
verbose name - extent_key.
2. Now that we have a reference to the node in alloc_reserved_tree_block
the delayed_tree_ref struct can be referenced inside the function and
this enable removing the "ref->level", "parent" and "ref_root"
arguments.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function already takes a transaction handle which contains a
reference to the fs_info. So use this and remove the extra argument.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The test failures are not clearly visible in the system log as they're
printed at INFO level. Add a new helper that is level ERROR. As this
touches almost all strings, I took the opportunity to unify them:
- decapitalize the first letter as there's a prefix and the text
continues after ":"
- glue strings split to more lines and un-indent so they fit to 80
columns
- use %llu instead of %Lu
- drop \n from the modified messages (test_msg is left untouched)
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_read_fs_root_no_name() may return ERR_PTR(-ENOENT) or
ERR_PTR(-ENOMEM) and therefore search_ioctl() and
btrfs_search_path_in_tree() should use PTR_ERR() instead of -ENOENT,
which all other callers of btrfs_read_fs_root_no_name() do.
Drop the error message as it would be confusing, the caller of ioctl
will likely interpret the error code and not look into the syslog.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I got a report that after upgrading to 4.16, someone's filesystems
weren't mounting:
[ 23.845852] BTRFS info (device loop0): unrecognized mount option 'subvol='
Before 4.16, this mounted the default subvolume. It turns out that this
empty "subvol=" is actually an application bug, but it was causing the
application to fail, so it's an ABI break if you squint.
The generic parsing code we use for mount options (match_token())
doesn't match an empty string as "%s". Previously, setup_root_args()
removed the "subvol=" string, but the mount path was cleaned up to not
need that. Add a dummy Opt_subvol_empty to fix this.
The simple workaround is to use / or . for the value of 'subvol=' .
Fixes: 312c89fbca ("btrfs: cleanup btrfs_mount() using btrfs_mount_root()")
CC: stable@vger.kernel.org # 4.16+
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Looks like the original idea was to print the hex of the flags which is
not coded with their flag name. So use the current buf pointer bp
instead of buf.
Reaching the uknown flags should never happen, it's there just in case.
Fixes: ebce0e01b9 ("btrfs: make block group flags in balance printks human-readable")
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The dedupe range is 16 MiB, with 4 KiB pages and 8 byte pointers, the
arrays can be 32KiB large. To avoid allocation failures due to
fragmented memory, use the allocation with fallback to vmalloc.
The arrays are allocated and freed only inside btrfs_extent_same and
reused for all the ranges.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We support big dedup requests by splitting range to smaller parts, and
call dedupe logic on each of them.
Instead of repeated allocation and deallocation, allocate once at the
beginning and reuse in the iteration.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_dedupe_file_range silently restricts the dedupe range to
to 16MiB to limit locking and working memory size and is documented in
manual page as implementation specific.
Let's remove that restriction by iterating over the dedup range in 16MiB
steps. This is backward compatible and will not change anything for
requests smaller then 16MiB.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Split btrfs_extent_same() to two parts where one is the main EXTENT_SAME
entry and a helper that can be repeatedly called on a range. This will
be used in following patches.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_link() calls btrfs_orphan_del() if it's linking an O_TMPFILE but
it doesn't reserve space to do so. Even before the removal of the
orphan_block_rsv it wasn't using it.
Fixes: ef3b9af50b ("Btrfs: implement inode_operations callback tmpfile")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We got rid of BTRFS_INODE_HAS_ORPHAN_ITEM and
BTRFS_INODE_ORPHAN_META_RESERVED, so we can renumber the flags to make
them consecutive again.
Signed-off-by: Omar Sandoval <osandov@fb.com>
[ switch them enums so we don't have to do that again ]
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we don't keep long-standing reservations for orphan items,
root->orphan_block_rsv isn't used. We can git rid of it, along with:
- root->orphan_lock, which was used to protect root->orphan_block_rsv
- root->orphan_inodes, which was used as a refcount for root->orphan_block_rsv
- BTRFS_INODE_ORPHAN_META_RESERVED, which was used to track reservations
in root->orphan_block_rsv
- btrfs_orphan_commit_root(), which was the last user of any of these
and does nothing else
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, we keep space reserved for all inode orphan items until the
inode is evicted (i.e., all references to it are dropped). We hit an
issue where an application would keep a bunch of deleted files open (by
design) and thus keep a large amount of space reserved, causing ENOSPC
errors when other operations tried to reserve space. This long-standing
reservation isn't absolutely necessary for a couple of reasons:
- We can almost always make the reservation we need or steal from the
global reserve for the orphan item
- If we can't, it's not the end of the world if we drop the orphan item
on the floor and let the next mount clean it up
So, get rid of persistent reservation and just reserve space in
btrfs_evict_inode().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The truncate loop in btrfs_evict_inode() does two things at once:
- It refills the temporary block reserve, potentially stealing from the
global reserve or committing
- It calls btrfs_truncate_inode_items()
The tangle of continues hides the fact that these two steps are actually
separate. Split the first step out into a separate function both for
clarity and so that we can reuse it in a later patch.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_evict_inode(), if btrfs_truncate_inode_items() fails, the inode
item will still be in the tree but we still return the ino to the ino
cache. That will blow up later when someone tries to allocate that ino,
so don't return it to the cache.
Fixes: 581bb05094 ("Btrfs: Cache free inode numbers in memory")
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_orphan_commit_root() tries to delete an orphan item for a
subvolume in the tree root, but we don't actually insert that item in
the first place. See commit 0a0d4415e3 ("Btrfs: delete dead code in
btrfs_orphan_add()"). We can get rid of it.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we don't add orphan items for truncate, there can't be races on
adding or deleting an orphan item, so this bit is unnecessary.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, we insert an orphan item during a truncate so that if there's
a crash, we don't leak extents past the on-disk i_size. However, since
commit 7f4f6e0a3f ("Btrfs: only update disk_i_size as we remove
extents"), we keep disk_i_size in sync with the extent items as we
truncate, so orphan cleanup will never have any extents to remove. Don't
bother with the superfluous orphan item.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_free_extent() can fail because of ENOMEM. There's no reason to
panic here, we can just abort the transaction.
Fixes: f4b9aa8d3b ("btrfs_truncate")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_truncate_inode_items() uses two variables for error handling, ret
and err. These are not handled consistently, leading to a couple of
bugs.
- Errors from btrfs_del_items() are handled but not propagated to the
caller
- If btrfs_run_delayed_refs() fails and aborts the transaction, we
continue running
Just use ret everywhere and simplify things a bit, fixing both of these
issues.
Fixes: 79787eaab4 ("btrfs: replace many BUG_ONs with proper error handling")
Fixes: 1262133b8d ("Btrfs: account for crcs in delayed ref processing")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit a41ad394a0 ("Btrfs: convert to the new truncate sequence")
changed btrfs_setsize() to call truncate_setsize() instead of
vmtruncate() but didn't update the comment above it. truncate_setsize()
never fails (the IS_SWAPFILE() check happens elsewhere), so remove the
comment.
Additionally, the comment above btrfs_page_mkwrite() references
vmtruncate(), but truncate_setsize() does the size write and page
locking now.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
select_delayed_ref really just gets the next delayed ref which has to
be processed - either an add ref or drop ref. We never go back for
anything. So the comment is actually bogus, just remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Deletion of a subvolume by rmdir(2) has become allowed by the
'commit cd2decf640b1 ("btrfs: Allow rmdir(2) to delete an empty
subvolume")'.
It is a kind of new feature and this commits add a sysfs entry
/sys/fs/btrfs/features/rmdir_subvol
to indicate the availability of the feature so that a user program
(e.g. fstests) can detect it.
Prior to this commit, all entries in /sys/fs/btrfs/features are feature
which depend on feature bits of superblock (i.e. each feature affects
on-disk format) and managed by attribute_group "btrfs_feature_attr_group".
For each fs, entries in /sys/fs/btrfs/UUID/features indicate which
features are enabled (or can be changed online) for the fs.
However, rmdir_subvol feature only depends on kernel module. Therefore
new attribute_group "btrfs_static_feature_attr_group" is introduced and
sysfs_merge_group() is used to share /sys/fs/btrfs/features directory.
Features in "btrfs_static_feature_attr_group" won't be listed in each
/sys/fs/btrfs/UUID/features.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use existing named values instead of the raw numbers.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Kernel logs are very important for the forensic investigations of the
issues in general make it easy to use it. This patch adds 'balance:'
prefix so that it can be easily searched.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
* The simple 'flags' refer to the btrfs inode
* ... that's in 'binode
* the FS_*_FL variables are 'fsflags'
* the old copies of the variable are prefixed by 'old_'
* Struct inode flags contain 'i_flags'.
Signed-off-by: David Sterba <dsterba@suse.com>
The new ioctl is an extension to the FS_IOC_SETFLAGS and adds new
flags and is extensible. Don't get fooled by the XATTR in the name, it
does not have anything in common with the extended attributes,
incidentally also abbreviated as XATTRs.
This patch allows to set the xflags portion of the fsxattr structure,
other items have no meaning and non-zero values will result in
EOPNOTSUPP.
Currently supported xflags:
- APPEND
- IMMUTABLE
- NOATIME
- NODUMP
- SYNC
The structure of btrfs_ioctl_fssetxattr copies btrfs_ioctl_setflags but
is simpler on the flag setting side.
The original patch was written by Chandan Jay Sharma but was incomplete
and no further revision has been sent.
Based-on-patches-by: Chandan Jay Sharma <chandansbg@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new ioctl is an extension to the FS_IOC_GETFLAGS and adds new
flags and is extensible. This patch allows to return the xflags portion
of the fsxattr structure, other items have no meaning for btrfs or can
be added later.
The original patch was written by Chandan Jay Sharma but was incomplete
and no further revision has been sent. Several cleanups were necessary
to avoid confusion with other ioctls, as we have another flavor of
flags.
Based-on-patches-by: Chandan Jay Sharma <chandansbg@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The FS_*_FL flags cannot be easily identified by a prefix but we still
need to recognize them so the 'fsflags' should be closer to the naming
scheme but again the 'fs' part sounds like it's a filesystem flag. I
don't have a better idea for now.
Signed-off-by: David Sterba <dsterba@suse.com>
The FS_*_FL flags cannot be easily identified by a variable name prefix
but we still need to recognize them so the 'fsflags' should be closer to
the naming scheme but again the 'fs' part sounds like it's a filesystem
flag. I don't have a better idea for now.
Signed-off-by: David Sterba <dsterba@suse.com>
Use a local btrfs_fs_devices variable to access the structure.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Delete the uuid_mutex lock here as this thread accesses the
btrfs_fs_devices::devices only (counters or called functions do a list
traversal). And the device_list_mutex lock is already taken.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
