pio2_gpio_init() annotated with __init, but called by pio2_probe()
which is annotated __devinit. pio2_gpio_exit() is annotated __exit,
but is called by pio2_probe() and by pio2_remove() which is annotated
__devexit.
Signed-off-by: Gerard Snitselaar <dev@snitselaar.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
module_param(bool) used to counter-intuitively take an int. In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.
It's time to remove the int/unsigned int option. For this version
it'll simply give a warning, but it'll break next kernel version.
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The PIO2 driver errors when GPIOLIB, on which it depends, is not enabled.
Add dependancy when selecting the PIO2.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The loop used to reset the interrupt masks has faulty logic. There are 4
banks of 8 I/O, however each mask is comprised of 2 bits and thus there are
8 sets of registers to clear. Driver was wrongly equating this with 8 banks
leading to a us writing past the end of the "bank" array (used to store mask
configuration as these registers are write only) and thus causing memory
corruption. Clear both registers of masks for each bank and half iterations.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch implements a driver for the GE PIO2 VME Parallel I/O Card. This
card is a 6U VME Card, implementing 32 solid-state relay switched IO lines,
in 4 groups of 8. Each bank of IO lines is built to function as input,
output or both depending on the variant of the card.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The functions vme_add_bus() and vme_remove_bus() were only being used
in the vme_register_bridge() and vme_unregister_bridge() functions
respectively. This patch gets rid of them and moves their code to
vme_register_bridge() and vme_unregister_bridge().
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Contents of TODO file has become more of a feature wish-list rather than issues
which should stop the VME driver being merged into the mainline kernel.
Update the TODO list with issues that need to be resolved before it can be
migrated to mainline.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Previously, the device-driver matching mechanism depended on the
vme_device_id structure due to the need for a bind table per driver.
This method of matching is no longer used so this patch merges the
fields of struct vme_device_id into struct vme_dev. Since this also
renders the slot field meaningless, it has also been removed in this
patch.
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Cc: Martyn Welch <martyn.welch@ge.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For jumper based boards (non VME64x), there is no mechanism
for detecting the card that is plugged into a specific slot. This
leads to issues in non-autodiscovery crates/cards when a card is
plugged into a slot that is "claimed" by a different driver. In
reality, there is no problem, but the driver rejects such a
configuration due to its dependence on the concept of slots.
This patch makes the concept of slots less critical and pushes the
driver match() to individual drivers (similar to what happens in the
ISA bus in driver/base/isa.c). This allows drivers to register the
number of devices that they expect without any restrictions. Devices
in this new model are now formatted as $driver_name-$bus_id.$device_id
(as compared to the earlier vme-$bus_id.$slot_number).
This model also makes the device model more logical as devices
are only registered when they actually exist whereas earlier,
a set of devices were being created automatically regardless of
them actually being there.
Another change introduced in this patch is that devices are now created
within the VME driver structure rather than in the VME bridge structure.
This way, things don't go haywire if the bridge driver is removed while
a driver is using it.
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Cc: Martyn Welch <martyn.welch@ge.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Instead of using a vanilla 'struct device' for VME devices, add new
'struct vme_dev'. Modifications have been made to the VME framework
API as well as all in-tree VME drivers.
The new vme_dev structure has the following advantages from the
current model used by the driver:
* Driver functions (probe, remove) now receive a VME device
instead of a pointer to the bridge device (cleaner design)
* It's easier to differenciate API calls as bridge-based or
device-based (ie. cleaner interface).
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Cc: Martyn Welch <martyn.welch@ge.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change the static array of 'struct device''s in struct vme_bridge
to instead use an array of pointers. This is in accordance with the
requirement that all kobjects be dynamically allocated (see
Documentation/kobject.txt) and never be statically allocated.
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds a list which keeps track of all registered VME
buses. This is required for adding refcounting later to bridge
modules, something that is not currently implemented.
This is based on the changes introduced by Emilio G. Cota in the
patch:
https://lkml.org/lkml/2010/10/25/486
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make PCI dependent functions ([alloc|free]_consistent() in
'vme.c') bridge specific. By removing the dependency of the
VME bridge framework on PCI, this patch allows for addition of
non-PCI based VME bridges.
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vme_irq_set is oblviously not needed (a remnant from old tests) and the
IOCTL exchange types have been updated following Greg's comments.
Allow the IOCTL call to generate VME interrupts when called on the vme/ctl
device with the right arguments.
Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The wait_event_interruptible call requires a condition as second argument that
needs to be true sometimes, which is obviously not the case with '0'. The new
logic is inspired from the tsi148 driver and takes into account Universe II chip
specifics.
Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Resurrect the vme/ctl device by allowing to open it even if it has no resources
and make related read/write/llseek operations dummy.
Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver must acknowledge the interrupts that have been actually serviced, not
the ones active. The current code could acknowledge an interrupt that has not
been serviced at all.
Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch solves all the existing issues reported by checkpatch.pl in the VME
sub-system.
Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch was generated by the following semantic patch:
// <smpl>
@@ expression E; @@
- if (E != NULL) { kfree(E); }
+ kfree(E);
@@ expression E; @@
- if (E != NULL) { kfree(E); E = NULL; }
+ kfree(E);
+ E = NULL;
// </smpl>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove some more unreachable code found in bridges/vme_ca91cx42.c
and bridges/vme_tsi148.c
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix loop condition in vme_register_bridge that results in an infinite
loop in the event that device_register fails.
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
buf_unalloc() frees the memory buffers allocated with vme_alloc_consistent.
The associated VME resource is needed in both vme_alloc_consistent and
vme_free_consistent; however the slave VME resources are being freed before
the calls to vme_free_consistent are made, which means the buffers
are never returned.
Fix this by freeing the VME resources only after the consistent buffers have
been returned.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kern_buf is not iomem; it comes from kmalloc and is directly
dereferenced.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
tsi148_irq_exit is called twice in .remove, which causes an oops.
Remove the second call, which apart from being redundant cannot
possibly work; the CR/CSR space has been already unmapped.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
