If the persistent ram buffer is not available, ram_console_late_init
would crash when dereferencing ram_console_zone. Return early if
ram console was not initialized.
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the notrace attribute to persistent_ram_write and the
non-ecc functions that it calls to allow persistent_ram to
be used for ftracing (only when ecc is disabled).
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow persistent_ram_write to be called on multiple cpus at
the same time, as long as ecc is not in use. Uses atomics
for the buffer->start and buffer->size counters.
[jstultz: Fix up some pr_info casting issues on 64bit]
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the ioremapped memory passed in from the drivers with
a memblock_reserve and vmap. Adds a new function,
persistent_ram_early_init, designed to be called from the machine
init_early callback, that calls memblock_remove and saves the
provided persistent ram area layout.
Drivers only pass in their struct device * and ecc settings.
Locating and mapping the memory is now handled entirely within
persistent_ram.
Also, convert ram_console to the new persistent_ram_init
parameters that only take a struct device * and ecc settings.
[jstultz: Fix pr_info casting issues on 64bit, folded two
patches as the build breaks if they are apart. Also replaced
phys_to_page() w/ pfn_to_page(addr>>PAGE_SHIFT), as phys_to_page
is only on a few arches.]
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION and related
#ifdefs. Also allow persistent ram zones without ecc enabled.
For some use cases, like the data portion of the upcoming
persistent_vars patches, or a persistent ftrace ringbuffer,
ecc on every update is too expensive.
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split ram_console into two halves.
persistent_ram is a set of apis that handle a block of memory
that does not get erased across a reboot. It provides functions
to fill it as a single buffer or a ring buffer, and to extract
the old data after a reboot. It handles ecc on the data to
correct bit errors introduced during reboot.
ram_console is now a small wrapper around persistent_ram that
feeds console data into the ringbuffer, and exports the old
data to /proc/last_kmsg after a reboot.
[jstultz: Moved persistent_ram.h to staging dir]
CC: Greg KH <gregkh@linuxfoundation.org>
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of these comments may still need to be reviewed.
This patch only cleans the comment style.
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
On a set-top-box based on the Broadcom 7405 SoC (MIPS), the Abilis as102 driver
causes a kernel oops while trying to map the URB stream buffers DMA addresses:
CPU 0 Unable to handle kernel paging request at virtual address 007b9900,
epc == 80010cc4, ra == 8039d108
Call Trace:
[<80010cc4>] mips_dma_map_page+0x14/0x108
[<8039d108>] usb_hcd_map_urb_for_dma+0x338/0x4a8
[<8039d540>] usb_hcd_submit_urb+0x2c8/0x8cc
[<e13655d8>] as102_submit_urb_stream+0x64/0xc8 [dvb_as102]
[<e1365680>] as102_usb_start_stream+0x44/0x80 [dvb_as102]
[<e1363628>] as102_dvb_dmx_start_feed+0xb4/0x17c [dvb_as102]
[<803e20f4>] dmx_ts_feed_start_filtering+0x5c/0x134
[<803de454>] dvb_dmxdev_start_feed+0xd4/0x158
[<803dff28>] dvb_dmxdev_filter_start+0x2b8/0x448
[<803e07ac>] dvb_demux_do_ioctl+0x2a0/0x654
[<803ddc8c>] dvb_usercopy+0x124/0x204
[<800d5284>] do_vfs_ioctl+0xa0/0x6c0
[<800d58e8>] sys_ioctl+0x44/0xa8
[<8000ecfc>] stack_done+0x20/0x40
On other boxes based on older SoCs (7401) this doesn't happen, so it looks like
a bug in the kernel specific to MIPS SMP. This issue has been reproduced on
several kernel versions from 2.6.18 to 3.1.0.
Since the base DMA address and the offsets are known, it is possible to map
the DMA addresses of the URB buffers directly in the driver. This workaround
fixes the problem and has been tested on both MIPS and x86 CPUs with success.
By the way, with this fix the driver works perfectly fine on the set-top-box:
both UHF and VHF frequencies are tuned without problems, and zapping is quite
fast. SNR and signal strength reports seems to work fine, too.
The only remaining problem (on both the PC and the set-top-box) is that after
a soft reboot the device is not recognized again by the kernel. It requires
a power cycle (or a manual unplug/replug) to be recognized again. So probably
the device state is not reset properly at shut-down.
Signed-off-by: Gianluca Gennari <gennarone@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
If go7007_usb_vendor_request() fails in write_reg_fp()
or in read_reg_fp(), the usb->i2c_lock mutex left locked.
The patch moves mutex_unlock(&usb->i2c_lock) before check
for go7007_usb_vendor_request() returned value.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Equivalent functionality can be obtained with loglevel=15
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Early ramconsole is not very useful, an early crash will prevent
getting the logged data out on the next boot, and CONFIG_DEBUG_LL=y
will get the same information. Drop it to simplify a future
refactoring.
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't store the bootinfo string and the ecc status string with
the recovered old log data. This will simplify refactoring the
persistent ram code out of the ram console code later.
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We want to ensure that we get all the console messages, even ones
that occur while the printing CPU is not yet online.
[jstultz: tweaked commit subject line]
CC: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In mei_irq_thread_read_bus_message we reused mei_hdr
allocated on read buffer to write the stop message.
There is no bug associated with this but for code
clarity we use write buffer also for message header.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deal with the case of buffers with virtual stride larger than one
page in fault_2d().
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch splits the DMM off into a separate sub-device, in order to
utilize the platform device information that was created as part of
the OMAP hwmod entry for the DMM.
The driver probe function queries the iomem resource and IRQ using
standard platform_get functions.
The OMAP DRM driver now calls the platform_driver_register() function
for the subordinate DMM driver inside its probe function. This
guarantees the required order for the DMM and ensures the DMM resources
are available for use by the DRM driver.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added check for valid device information before dumping debugfs
information.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OMAP3 does not contain a DMM/Tiler block. As such, we should not
be exposing any DMM debugfs entries on OMAP3 platforms.
Added inline helper function to verify existence of DMM.
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add some additional debugfs file to aid in tracking buffer usage.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When flipping, defer unpinning until scanout completes, as indicated
by the appropriate END_WIN irq.
This also re-organizes things a bit, in replacing omap_fb_{pin,unpin}
with omap_fb_replace(), to make it easier to add support for scanout
synchronized DMM refill mode (flipping by just reprogramming DMM
synchronized with DSS scanout).
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that 'struct drm_plane' has a pixel_format field, use that. And
fix a minor typo.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If fbcon calls us from atomic context, push the work off to the
workqueue to avoid calling into the gem/dmm code in an atomic
context.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a workqueue for omapdrm driver, which is needed for at least a
couple things currently: (1) moving omap_gem_roll() to a non-atomic
context, (2) synchronizing page flips w/ DSS scanout related irq's
(in particular not unmapping previous buffer until DSS finishes
scanout).
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get the supported formats for a plane from ovl's supported_modes
bitmask.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tsl2563 probe function has two minor issues with it's error handling paths:
1) it is silent (did not report errors to dmesg)
2) did not return failure code (mixed up use of ret and err)
and two major issues:
3) goto fail2 would corrupt a free memory pool ("double free")
4) device registration failure did NOT cancel/flush delayed work.
(and thus dereference a freed data structure later)
The "double free" is subtle and was introduced with this change:
Author: Jonathan Cameron <jic23@cam.ac.uk>
Date: Mon Apr 18 12:58:55 2011 +0100
staging:iio:tsl2563 take advantage of new iio_device_allocate private data.
Originally, chip was allocated seperately. Now it's appended to the
indio_dev by iio_allocate_device(sizeof(*chip)). So we only need one
kfree call as well (in iio_free_device()).
Gory details of tracking this down are here:
http://crosbug.com/26819
Despite iio_device_registration failing, system can at least now boot.
Will follow up with a fix to "double register : in_intensity_both_raw"
error that is included in the bug report.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Bryan Freed <bfreed@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch 2080913e01: "staging: r8712u: Fix regression caused by
commit 8c213fa" from Feb 25, 2012, leads to the following Smatch
complaint:
drivers/staging/rtl8712/usb_intf.c:629 r871xu_dev_remove()
warn: variable dereferenced before check 'padapter' (see line 625)
The fix is to move the new statements inside the block where padapter
is not NULL.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch ensures that the value of ZS_MIN_ALLOC_SIZE, for the
PAGE_SIZE and MAX_PHYSMEM_BITS on the system, allows for all
possible object ids in the lowest storage class to be encoded
in the object handle.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch provides a way to determine or "set a
reasonable value for" MAX_PHYSMEM_BITS in the case that
it is not defined (i.e. !SPARSEMEM)
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch moves where max_zspage_order is declared and
changes its meaning. "Order" typically implies 2^order
of something; however, it is currently being used as the
"maximum number of single pages in a zspage". To add clarity,
ZS_MAX_ZSPAGE_ORDER is now used to calculate ZS_MAX_PAGES_PER_ZSPAGE,
which is 2^ZS_MAX_ZSPAGE_ORDER and is the upper bound on the number
of pages in a zspage.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch moves the definitions of _PFN_BITS, OBJ_INDEX_BITS
and OBJ_INDEX_MASK from zsmalloc-main.c to zsmalloc_int.h
They will be needed to determine ZS_MIN_ALLOC_SIZE in the next
patch
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zcache cannot currently be loaded as a module. However
the Kconfig allows it to be built as a module; something that
the user probably does not intend since the module is not
loadable.
This patch switches zcache from a tristate to a bool in the Kconfig
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e553f182d ("staging: iio: core: Introduce debugfs support, add support
for direct register access") added a '#if defined(CONFIG_DEBUG_FS)' around
iio_read_channel_ext_info and iio_write_channel_ext_info causing the following
compile error if CONFIG_DEBUG_FS is not defined.
drivers/staging/iio/industrialio-core.c:621:11: error: 'iio_read_channel_ext_info' undeclared (first use in this function)
drivers/staging/iio/industrialio-core.c:623:11: error: 'iio_write_channel_ext_info' undeclared (first use in this function)
This patch fixes the issue by moving the functions out of the '#if
defined(CONFIG_DEBUG_FS)' section again.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix compiler warning about the type of the module parameter.
Cc: San Mehat <san@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lowmemorykiller registers an atomic notifier for notfication of when
the task is freed. From this atomic notifier callback, it removes the
atomic notifier via task_free_unregister(). This is incorrect because
atomic_notifier_chain_unregister() calls syncronize_rcu(), which can
sleep, which shouldn't be done from an atomic notifier.
Fix this by registering the notifier during init, and only unregister it
if the lowmemorykiller is unloaded.
Rebased to -next by Paul E. McKenney.
Rebased to -next again by Anton Vorontsov.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Christian Bejram <christian.bejram@stericsson.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GCC warns that module_param_named() indirectly returns a bool type value
which is different from 'int' type binder_debug_no_lock declared. Change
it to bool because it is a internal switch for debugging.
Signed-off-by: Zhengwang Ruan <ruan.zhengwang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel already has a debug allocator, no need to have one unique to
a single driver. So delete it, replace with kfree, kmalloc, and, in a
few places that need it, kzalloc().
Cc: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Memory is being allocated by kmalloc and stored in
variable pstAddIndication. However, this memory is
not being freed in all cases. Therefore, this patch
frees it on several exit paths. This patch also
removes a whitespace.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems the USB device ID 0bda:8192 is wrongly assigned to the
RTL8192SU chip and not to the RTL8191SU chip in the USB database.
So this patch moves this device ID from the rtl8192u staging
driver to the rtl8712 staging driver.
This patch was tested with a Radicom WIFIHU embedded wireless
module with a RTL8191SU chip and the USB device ID 0bda:8192.
Without the patch the rtl8192u driver claims this device, but
it does not work. With the patch the rtl8712 driver services
this device and it works.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove copies of the double USB device IDs:
- 0bda:8172
- 0bda:8174
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No functional changes.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers may not need setup_ops at all, so let the core supply
some empty ops.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes since V1:
Exclude iio debugfs code in case CONFIG_DEBUG_FS isn't enabled.
Introduce helper function iio_get_debugfs_dentry.
Document additions to struct iio_dev
iio_debugfs_read_reg:
Use snprintf.
Use a shorter fixed length.
Introduce len instead of pointer math.
iio_debugfs_write_reg:
Fix return value use PT_ERR.
Changes since V2:
Use debugfs_remove.
Fix whitespace damage.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch fixes some comments and some typos that I have found
while reading drivers/staging/iio/*
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
app_id comes from the network and can't be trusted. If it's zero then
it will lead to a kernel crash.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit c6dc001 "staging: r8712u: Merging Realtek's latest (v2.6.6).
Various fixes", the returned qual.qual member of the iw_statistics
struct was changed. For strong signals, this change made no difference;
however for medium and weak signals it results in a low signal that
shows considerable fluctuation, When using wicd for a medium-strength
AP, the value reported in the status line is reduced from 100% to 60% by
this bug.
This problem is reported in https://bugzilla.kernel.org/show_bug.cgi?id=42826.
Reported-and-tested-by: Robert Crawford <wrc1944@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 8c213fa "staging: r8712u: Use asynchronous firmware loading",
the command to release the firmware was placed in the wrong routine.
In combination with the bug introduced in commit a5ee652 "staging: r8712u:
Interface-state not fully tracked", the driver attempts to upload firmware
that had already been released. This bug is the source of one of the
problems in https://bugs.archlinux.org/task/27996#comment89833.
Tested-by: Alberto Lago Ballesteros <saniukeokusainaya@gmail.com>
Tested-by: Adrian <agib@gmx.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit a5ee652 "staging: r8712u: Interface-state not fully tracked",
the private boolean "bup" was set false when the interface was brought down,
as that seemed appropriate. This change has not caused any problems when
using NetworkManager or manual control of the device; however, when wicd
control is used, there is a locking problem in wpa_supplicant, as shown in
https://bugzilla.kernel.org/show_bug.cgi?id=42818.
This fix reverts the only code change in commit a5ee652. My
analysis is that "bup" is badly named. In its present form, it
seems to indicate the up/down state of the device, but its usage
is more consistent with an initialized/uninitialized state. That
problem will be addressed in a later patch.
Note: Commit 8c213fa, which introdued asynchronous firmware loading
for this driver, exposed this bug to a greater extent. That bug
is addressed in the next patch in this series.
This bug is also responsible for the bug in
https://bugzilla.kernel.org/show_bug.cgi?id=42815. and this bug is
also part of the problems discussed at https://bugs.archlinux.org/task/27996#comment89950.
Tested-by: Alberto Lago Ballesteros <saniukeokusainaya@gmail.com>
Tested-by: Adrian <agib@gmx.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [3.2+]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 1ca1a92cc6 "Staging: wlan-ng: memsetting the wrong amount of
data" I changed the code so we didn't memset() past the end of the
msg1.bssid.data[] array. Walter Harms noticed that it was weird that
we were setting the len to 6 when there were 7 elements in the array.
Pavel Roskin pointed out that the intent of the code was actually to
memset() msg1.bssid.data.data[] which is a 6 character array.
Reported-by: Walter Harms <wharms@bfs.de>
Reported-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The header bc_dts_types is not used, so we can remove it.
Signed-off-by: Jorgyano Vieira <jorgyano@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces the local includes with the global header.
So the the crystalhd.h will be the only header included by the other files.
Signed-off-by: Jorgyano Vieira <jorgyano@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the crystalhd_cmds.h there was a struct dependence bug:
the struct crystalhd_adp (which is declared on crystalhd_lnx.h)
is used on the crystalhd_cmd struct, however the crystalhd_lnx.h is
never included on crystalhd_cmds.h at all. Including the
crystalhd_lnx.h on crystalhd_cmds.h breaks the build,
many dependencies error occurrs, most of the type
"error: 'struct bar' has no member named 'foo'",
so I decided to reorganize the headers by adding a global header.
The gobal header crystalhd.h includes all the local headers.
The idea is that the crystalhd header will be the only included
by the others files, this will avoid the mess of many #include levels.
The order of the headers included by crystalhd.h considers the
dependencies among the headers.
Signed-off-by: Jorgyano Vieira <jorgyano@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes a superfluous loop in asus_oled.c
The code is equivalent to do{...} while (0) and thus executes the code
exactly once -> so we can simply remove the loop.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace bitfield struct hbm_cmd with simple u8 as we
always access the value as whole. This allows us to remove
few ugly type casts
For possible further uses and documentation purposes we add
corresponding bitmask defines
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
~ENODEV is a different number than -ENODEV
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes a bug where the zv code writes before the allocated
buffer, resulting in system memory corruption. This was introduced
during the switch from xvmalloc to zsmalloc.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a type mismatch in the compression code where
a size_t pointer was cast to a unsigned int pointer. On
little endian archs, there is no issue. However on big
endian archs, the value is incorrect, taking the high
order bits and truncating the lower order bits.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This structure is used in an ioctl definition and was causing the
64-bit PowerPC build to fail. The size of the array in the structure
has been reduced to fix this.
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With bug.h currently living right in linux/kernel.h there
are files that use BUG_ON and friends but are not including
the header explicitly. Fix them up so we can remove the
presence in kernel.h file.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Different tree maintainers picked up independently generated
trivial compile fixes based on linux-next testing, resulting
in some cases where a file would have got more than one addition
of module.h once everything was all merged together.
Delete any duplicates so includecheck isn't complaining about
anything related to module.h/export.h changes.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
This converts the serqt_usb2.c driver to use the module_usb_serial_driver() call
instead of having to have a module_init/module_exit function, saving a lot
of duplicated code.
CC: Bill Pemberton <wfp5p@virginia.edu>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This converts the quatech_usb2.c driver to use the module_usb_serial_driver() call
instead of having to have a module_init/module_exit function, saving a lot
of duplicated code.
CC: Lucas De Marchi <lucas.demarchi@profusion.mobi>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This moves the BOT data structures for CBW and CSW from drivers internal
header file to global include able file in include/.
The storage gadget is using the same name for CSW but a different for
CBW so I fix it up properly. The same goes for the ub driver and keucr
driver in staging.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch (as1530) modifies the following usb-serial drivers from
drivers/staging to utilize the new usb_serial_{de}register_drivers()
routines:
quatech_usb2 and serqt_usb2.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The core must not modify available_scan_mask, because it causes problems
with drivers where multiple instances of the driver share the same mask set.
So make this explicit by marking available scan masks as const.
The max1363 driver needs some minor adjustment to accommodate this change.
Pull scan mask allocation into a separate function.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The declaration for iio_buffer_deinit has been around for quite some time, but
the function itself has never been added. So remove the declaration.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The AD5666 is identical to the ad5064-1, except that it has a internal reference
voltage.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The AD5628/AD5648/AD5668 are similar to the AD5024/AD5044/AD5064. The difference
being that they have an internal reference voltage and 8 instead of 4 DAC
channels.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The AD5025/AD5045/AD5065 are identical to the AD5024/AD5044/AD5064 except that
they have 2 instead of 4 DAC channels.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prepare the driver for the addition of chip variants with a different number of
channels. This is done by not hard-coding the number of channels, but instead
add a field to the chip info struct holding the number of channels. Also do not
embed the channel specs into the chip info, but rather store them independently.
This allows sharing the same channel spec between different chip infos.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use extended channel info attributes for the powerdown, powerdown_mode and
powerdown_mode_available attributes.
Note that this patch moves the chip info defintion around to avoid having to use
forward declarations for the extended channel info attributes callbacks.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes devices have per channel properties which either do not map nicely to
the current channel info scheme (e.g. string properties) or are very device
specific, so it does not make sense to add generic support for them.
Currently drivers define these attributes by hand for each channel. Depending on
the number of channels this can amount to quite a few lines of boilerplate code.
Especially if a driver supports multiple variations of a chip with different
numbers of channels. In this case it becomes necessary to have a individual
attribute list per chip variation and also a individual iio_info struct.
This patch introduces a new scheme for handling such per channel attributes
called extended channel info attributes. A extended channel info attribute
consist of a name, a flag whether it is shared and read and write callbacks.
The read and write callbacks are similar to the {read,write}_raw callbacks and
take a IIO device and a channel as their first parameters, but instead of
pre-parsed integer values they directly get passed the raw string value, which
has been written to the sysfs file.
It is possible to assign a list of extended channel info attributes to a
channel. For each extended channel info attribute the IIO core will create a new
sysfs attribute conforming to the IIO channel naming spec for the channels type,
similar as for normal info attributes. Read and write access to this sysfs
attribute will be redirected to the extended channel info attributes read and
write callbacks.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the IIO drivers which have not been converted yet to module_spi_driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use dev_pm_ops instead of legacy suspend/resume callbacks for IIO drivers.
Note that this patch introduces a few new #ifdef CONFIG_PM_SLEEP around the
suspend and resume callbacks to avoid warnings of unused functions if
CONFIG_PM_SLEEP is not defined.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Very basic description of the way iio consumers work and how to use
this functionality.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Direct copy of version proposed for the non staging branch.
Needed here to allow testing of more advanced inkernel
interface code.
Minimal support of simple in, curr and temp attributes
so far.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In kernel interfaces need these, so make them available.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lifted from proposal for in kernel interface built on the out of staging
branch.
Two elements here:
* Map as defined in "inkern.h"
* Matching code to actually get the iio_dev and channel
that we want from the global list of IIO devices.
V4: Everything now built if iio is built (rather than being optional)
Removal race condition prevented by using info pointer as a check
of removal under a lock.
V3: Drop the option of registering / getting channels using dev pointer.
Stick to name only as suggested by Mark Brown (this has caused user
confusion in the regulator framework.)
V2: As per Greg KH suggestion, move over to registration by passing
the tables into the provider drivers (how regulator does it).
This does not prevent us using the original more flexible approach
if at a later date there is a usecase that demands it.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This prevents use of provider callbacks after it has been unregistered.
Note that all code using this that can be called from a consumer *must*
check the pointer before using and hold the info_exist_lock throughout
the usage of the callbacks in info.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to detect WDT feature on the dsp code, we need to
find the symbol used to enable it inside the baseimage.
This should fix the warning comming from L3 driver:
WARNING: at arch/arm/mach-omap2/omap_l3_smx.c:161 omap3_l3_app_irq...
In-band Error seen by IVA_SS at address 0
...
That occurs because the dsp tries to access wdt3 registers when the clock
for those registers is not enabled.
Reported-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to detect it at runtime, we need the code handling wdt
clock available at runtime to decide whether to enable or disable
based on the baseimage symbols. Default timeout has been set to 5
seconds.
Downside is that we will lose the option to set a custom timeout
for overflow, but than can be added (if needed) as part of debugfs.
Signed-off-by: Omar Ramirez <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit d6c25be (mdio-octeon: use an unique MDIO bus name.) changed the
names used to refer to MDIO buses. The ethernet driver must be
changed to match, so that the PHY drivers can be attached.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The readers list is traversed under the log->mutex lock
(for example from fix_up_readers()), but the deletion of
elements from this list is not being done under this lock.
Cc: Brian Swetland <swetland@google.com>
Cc: Dima Zavin <dima@android.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are each >20k LOC drivers that embed an entire SD stack, and present
SD cards as if they were SCSI devices; both drivers should be rewritten to
be small hooks that connect the PCI (for rts_pstor) or USB (for rts5139)
hardware into Linux's MMC/xD/memorystick stacks.
Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: edwin_rong <edwin_rong@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
p80211item_pstr6_t is the size of "msg1.bssid" (16 bytes) but
msg1.bssid.data is type p80211pstr6_t and it is smaller (7 bytes). We
had just set that memory to zeroes earlier and now we're writing over it
with 0xff because we're writing past the end of the struct.
I don't know if this actually causes a problem. It may be that we
initialize the extra 0xff bytes correctly later. But the current code
is obviously wrong and we should fix it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify return value of .ndo_set_mac_address if the given address
isn't valid. Return -EADDRNOTAVAIL as eth_mac_addr() already does
if is_valid_ether_addr() fails.
Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to the alphatrack.c and tranzport.c that fixes up an error
found by checkpatch.pl tool.
Signed-off-by: Hitoshi Nakamori <hitoshi.nakamori@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch fixes some comments with typos in the them and makes a comment make more sense.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9256a47 fixed a deadlock condition, being sure that the buddy
list spinlock is always taken before the page spinlock.
However in zbud_free_and_delist() locking order is the opposite
(page lock -> list lock).
Possible unsafe locking scenario (reported by lockdep):
CPU0 CPU1
---- ----
lock(&(&zbpg->lock)->rlock);
lock(zbud_budlists_spinlock);
lock(&(&zbpg->lock)->rlock);
lock(zbud_budlists_spinlock);
Fix by grabbing the locks in opposite order in zbud_free_and_delist().
Signed-off-by: Andrea Righi <andrea@betterlinux.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netif_rx is meant to be called from interrupts because it doesn't wake
up ksoftirqd. For calling from outside interrupts, netif_rx_ni exists.
This stops the error "NOHZ: local_softirq_panding 08" that happens on
some machines with NOHZ and plip --- it is caused by the fact that
softirq is pending and ksoftirqd is sleeping.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ramster can't be a module (yet) and depends on CONFIGFS_FS=y, but
allmodconfig builds with CONFIGFS_FS=m, which breaks the build.
And forcing CONFIGFS_FS=y with select breaks the build in other ways.
So just don't build ramster unless CONFIGFS_FS=y.
Also, while we're here, add a comment as to why BROKEN is depended.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to some conflicting debug vars, kernel build will warn when
CONFIG_RAMSTER=y and CONFIG_OCFS2=m and will fail when
CONFIG_RAMSTER=y and CONFIG_OCFS2=y (rare).
Rename ramster mlog vars to avoid the name conflict.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New kernel developer inspired by the 2010 FOSDEM talk. Running checkpatch on
p80211netdev.c gave the error: p80211netdev.c:153: ERROR: "foo * bar" should
be "foo *bar". Fixed it by doing what was suggested.
Signed-off-by: Sebastiaan de Haan <sebastiaan@sebastiaandehaan.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch eliminates following type of warnings
warning: no previous prototype for '...func...' [-Wmissing-prototypes]
For this is a single file example lets make all API-like functions
be static.
Since all static functions should be used so let's call
to amt_host_if_deinit() even if in this example it's not really necessary
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks during cleanup we converted type of host_version_supported
member from UINT8 into int instead of u8.
Since we've queried only for boolean value of
this variable the bug wasn't really visible.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable psfLocalSet may not follow the correct
path in the code, and therefore may not be set
properly. As such, causing a null dereference.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The BCMLOG_ENTER macro is used only in five functions, perhaps
it is remainder of debugging some specific problem,
now, this macro don't seems to be useful, so it should be removed.
Signed-off-by: Jorgyano Vieira <jorgyano@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The BCMLOG_LEAVE macro is not used, so there is no reason to keep it.
Signed-off-by: Jorgyano Vieira <jorgyano@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added Kconfig and Kbuild files for ozwpan USB over WiFi driver.
Modified parent Makefile and Kconfig to include them.
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added tracing facilities and also memory allocation and URB tracking.
This is for debugging purposes and is all optional and can be switched
out at compile time.
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The event logging subsystem allows internal events in the driver to
be logged. This facilitates testing the correct operation of the
driver. This subsystem is optional and can be switched out at
compile time.
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The character device provides a management interface to the driver
and also provides an additional service to the protocol for side
band communication with the device.
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The L2 protocol supports various services, one of which is USB.
This provides the implementation of that service and plumbs it to
the virtual USB HCD.
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added the implementation of the virtual USB HCD that is used to
present devices connected via the network to the USB subsystem.
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added support for maintaining state and data buffering for devices
connected via the network.
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added the basic implementation of the L2 protocol support used to
communicate with devices over the network.
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This series of patches adds the Ozmo USB over WiFi driver to the
driver staging directory. This is a driver for a virtual USB HCD
and uses an L2 network protocol to talk to the device.
This patch adds the driver entry code and a README file with more
details.
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Rothwell reported that the following commit broke the
linux-next build:
1fd36adcd9: Replace the fd_sets in struct fdtable with an array of unsigned longs
Fix places where ->fds_bits needed to be removed as the core
kernel no longer uses fd_set internally for file descriptor
table management. There are two places:
(1) drivers/staging/android/binder.c
(2) arch/mips/kernel/kspd.c
Question: Should sp_cleanup() in the MIPS arch be using find_next_bit()
or fls()?
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ralf Bächle <ralf@linux-mips.org>
cc: Arve Hjønnevåg <arve@android.com>
Link: http://lkml.kernel.org/r/20120224105707.32170.11550.stgit@warthog.procyon.org.uk
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Unify return value of .ndo_set_mac_address if the given address
isn't valid. Return -EADDRNOTAVAIL as eth_mac_addr() already does
if is_valid_ether_addr() fails.
Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wrap accesses to the fd_sets in struct fdtable (for recording open files and
close-on-exec flags) so that we can move away from using fd_sets since we
abuse the fd_set structs by not allocating the full-sized structure under
normal circumstances and by non-core code looking at the internals of the
fd_sets.
The first abuse means that use of FD_ZERO() on these fd_sets is not permitted,
since that cannot be told about their abnormal lengths.
This introduces six wrapper functions for setting, clearing and testing
close-on-exec flags and fd-is-open flags:
void __set_close_on_exec(int fd, struct fdtable *fdt);
void __clear_close_on_exec(int fd, struct fdtable *fdt);
bool close_on_exec(int fd, const struct fdtable *fdt);
void __set_open_fd(int fd, struct fdtable *fdt);
void __clear_open_fd(int fd, struct fdtable *fdt);
bool fd_is_open(int fd, const struct fdtable *fdt);
Note that I've prepended '__' to the names of the set/clear functions because
they require the caller to hold a lock to use them.
Note also that I haven't added wrappers for looking behind the scenes at the
the array. Possibly that should exist too.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20120216174942.23314.1364.stgit@warthog.procyon.org.uk
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
It can't seem to build properly, so let's just mark it broken until
stuff sorts itself out.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/sm7xx/smtcfb.c included 'linux/module.h' twice,
remove the duplicate.
Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In drivers/staging/rtl8192e/rtllib_softmac.c::rtllib_rx_assoc_resp()
we allocate memory for 'network' with kzalloc() and then proceed to
zero the already zeroed mem we got from kzalloc() with
memset(). That's redundant, so remove the memset()
We also fail to kfree() the memory we allocated for 'network' if we do not enter
if (ieee->current_network.qos_data.supported == 1) {
and the variable then goes out of scope.
To fix that I simply moved the kfree() that was inside that 'if'
statement to instead be just after it. It then covers both the case
where we take the branch and when we don't.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a 3-channel ADC driver for the LPC32xx ARM SoC
Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Improvement of debug macros to ensure safe use on if/else statements.
Signed-off-by: Jorgyano Vieira <jorgyano@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RAMster implements peer-to-peer transcendent memory, allowing a "cluster"
of kernels to dynamically pool their RAM.
This patch adds new files necessary for ramster support: The file
ramster.h declares externs and some pampd bitfield manipulation. The
file zcache.h declares some zcache functions that now must be accessed
from the ramster glue code. The file r2net.c is the glue between zcache
and the messaging layer, providing routines called from zcache that
initiate messages, and routines that handle messages by calling zcache.
TODO explains future plans for merging.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RAMster implements peer-to-peer transcendent memory, allowing a "cluster"
of kernels to dynamically pool their RAM.
This patch incorporates changes transforming zcache to work with
a remote store.
In tmem.[ch], new "repatriate" (provoke async get) and "localify" (handle
incoming data resulting from an async get) routines combine with a handful
of changes to existing pamops interfaces allow the generic tmem code
to support asynchronous operations. Also, a new tmem_xhandle struct
groups together key information that must be passed to remote tmem stores.
Zcache-main.c is augmented with a large amount of ramster-specific code
to handle remote operations and "foreign" pages on both ends of the
"remotify" protocol. New "foreign" pools are auto-created on demand.
A "selfshrinker" thread periodically repatriates remote persistent pages
when local memory conditions allow. For certain operations, a queue is
necessary to guarantee strict ordering as out-of-order puts/flushes can
cause strange race conditions. Pampd pointers now either point to local
memory OR describe a remote page; to allow the same 64-bits to describe
either, the LSB is used to differentiate. Some acrobatics must be performed
to ensure local memory is available to handle a remote persistent get,
or deal with the data directly anyway if the malloc failed. Lots
of ramster-specific statistics are available via sysfs.
Note: Some debug ifdefs left in for now.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RAMster implements peer-to-peer transcendent memory, allowing a "cluster"
of kernels to dynamically pool their RAM.
Zcache is in the process of converting allocators, from xvmalloc to zsmalloc.
Further, RAMster V5 testing to date has been done only with xvmalloc.
To avoid merging problems, a linux-3.2 copy of xvmalloc is incorporated by
this patch. Later patches will be able to eliminate xvmalloc and use zsmalloc.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RAMster implements peer-to-peer transcendent memory, allowing a "cluster"
of kernels to dynamically pool their RAM.
This patch copies files from drivers/staging/zcache. RAMster compresses
pages locally before transmitting them to another node, so we can
leverage the zcache and tmem code directly. Note: there are
no ramster-specific changes yet to these files.
(Why copy? The ramster tmem.c/tmem.h changes are definitely shareable
between zcache and ramster; the eventual destination for tmem.c
is the linux lib directory. Ramster changes to zcache are more substantial
and zcache is currently undergoing some significant unrelated changes
(including a new allocator and breaking zcache-main.c into smaller files),
so it seemed best to branch temporarily and merge later.)
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RAMster implements peer-to-peer transcendent memory, allowing a "cluster"
of kernels to dynamically pool their RAM.
This patch provides the cluster and messaging foundation for RAMster,
implementing the basic cluster discovery, mapping, heartbeat / keepalive,
and messaging ("r2net") that RAMster requires for internode communication.
This code heavily leverages code from the ocfs2 cluster layer but
has been extended, interfaces to userland changed, and external functions
renamed so that RAMster and ocfs2 can co-exist in the kernel and userland.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RAMster implements peer-to-peer transcendent memory, allowing a "cluster"
of kernels to dynamically pool their RAM.
Enable build of ramster as a staging driver
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two members of pr_ctxt allocated during bridge_open that
are never freed resulting in memory leaks, these are stream_id and
node_id, they are now freed on release of the handle (bridge_release)
right before freeing pr_ctxt.
Error path for bridge_open was also fixed since the same variables
could result in memory leaking due to missing handling of failure
scenarios. While at it, the indentation changes were introduced to
avoid interleaved goto statements inside big if blocks.
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DRIVER_HALT is a driver state that was originally
defined as a #define statement. This patch moves
it to the LedEvents type as an enumerated
value for the purpose of removing a compile time warning:
drivers/staging/bcm/led_control.c: In function ‘LEDControlThread’:
drivers/staging/bcm/led_control.c:817:3: warning: case value ‘255’ not in enumerated type ‘LedEventInfo_t’ [-Wswitch]
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zram accepts number of devices to be created
as a module parameter. This was renamed from
num_devices to zram_num_devices (without updating
the documentation!) since num_devices was declared
as a non-static global variable, polluting the global
namespace. Now, we declare it as a static variable
and revert back the name change.
The documentation (zram.txt) already mentions
num_devices as the module parameter name.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a small evtest like application to monitor events generated by an IIO
device. The application can be used as an example on how to listen for IIO
events and also is usful for testing and debugging device drivers which
generate IIO events.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add macros for extracting whether the event is for a differential channel and
the second channel number from the event code. These were the only two fields
which did not have such an macro yet.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We name this field "chan" throughout IIO with the exception of this one macro.
Rename it to be more consistent.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 43ba1100 ("staging:iio:events: Use waitqueue lock to protect event
queue") removed the event_list_lock field from the iio_event_interface struct,
but missed to remove the same field from the documentation for that function.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declaration between .h and .c was mismatched. Matched both declara
tions avoiding an sparse check error.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The first parameter should be "number of elements" and the second parameter
should be "element size".
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
acpi_size is u32 or u64 depending on architecture. Cast it to
unsigned long and use %lu for printing.
This fix following build warning:
drivers/staging/quickstart/quickstart.c: In function ‘quickstart_acpi_ghid’:
drivers/staging/quickstart/quickstart.c:212:5: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 3 has type ‘acpi_size’ [-Wformat]
Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use scnprintf instead of snprintf in quickstart_pressed_button_show as
suggested in Documentation/filesystems/sysfs.txt.
Signed-off-by: Szymon Janc <szymon@janc.net.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
/proc/pid/oom_adj is deprecated and will be removed in August 2012
according to Documentation/feature-removal-schedule.txt. Convert its
usage in the lowmemorykiller to use the new interface, oom_score_adj,
instead.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SEP build fails if crypto is not selected.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The storage driver (storvsc_drv.c) handles all block storage devices
assigned to Linux guests hosted on Hyper-V. This driver has been in the
staging tree for a while and this patch moves it out of the staging area.
James was willing to apply this patch during the 3.3-rc phase and a decision
was taken to defer this to 3.4 since Greg had queued up a bunch of storvsc
patches for 3.4. Now that Greg has applied all of the pending storvsc patches,
I am sending this patch to move this driver out of staging. Based on James'
recommendation, this patch gets rid of the unneeded files in the staging/hv
directory.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
linux/vmalloc.h added to zsmalloc-main.c to resolve implicit
declaration errors.
X86 dependency added to zsmalloc and dependent drivers zcache and zram.
This X86 only requirement is not ideal. Working to find portable
functions for __flush_tlb_one and set_pte.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was done to resolve some merge issues with the following files that
had changed in both branches:
drivers/staging/rtl8712/rtl871x_sta_mgt.c
drivers/staging/tidspbridge/rmgr/drv_interface.c
drivers/staging/zcache/zcache-main.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
