Exynos5 SoCs have a General SCALER (GSCALER) IP block that can be used
to do video streams scaling and color space conversions by hardware.
Enable support for its driver as a module so the GSCALER can be tested.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Exynos MIPI driver does not work anymore (it is board file only) so
it is removed. Remove also config options.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Donghwa Lee <dh09.lee@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The schedutil CPUFreq governor could be built as a module but the change
"cpufreq / sched: Pass flags to cpufreq_update_util()" made it
non-modular so attempting to enable as module leads to a warning:
warning: symbol value 'm' invalid for CPU_FREQ_GOV_SCHEDUTIL
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Systemd already supports seccomp. It seems some distros are building
systemd with seccomp, e.g. Arch on ARM, thus leading to boot errors:
systemd-logind.service: Failed at step SECCOMP spawning /usr/lib/systemd/systemd-logind: Invalid argument
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
PM_DEBUG and PM_ADVANCED_DEBUG bring some information useful for
development and they should not cause any significant overhead. Enable
them in default configuration so debugging would be slightly easier.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Kukjin Kim <kgene@kernel.org>
This patch enables the bus frequency scaling driver with devfreq and
devfreq-event framework. Devfreq is already supported on Odroid U3/XU3,
Trats2 and Rinato/Monk boards.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[k.kozlowski: Don't enable symbols already selected, adjust commit msg]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Defconfig additions, removals, etc. Most of these are small changes adding
the options for newly upstreamed drivers, or drivers needed for new board
support.
- Removed Broadcom bcm_defconfig, targets are all covered in multi_v7_defconfig
- New defconfig: multi_v4t_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jRHp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Defconfig additions, removals, etc.
Most of these are small changes adding the options for newly
upstreamed drivers, or drivers needed for new board support.
- removed Broadcom bcm_defconfig, targets are all covered in
multi_v7_defconfig
- new defconfig: multi_v4t_defconfig"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: multi_v7_defconfig: enable STMicroelectronics DRM Support
ARM: multi_v7_defconfig: enable STMicroelectronics BDISP 2D blitter driver
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working
ARM: configs: lpc18xx: enable adc and dac iio drivers
ARM: config: Add a multi_v4t_defconfig
ARM: multi_v7_defconfig: add ACT8945A
ARM: at91/defconfig: Add ACT8945A driver
ARM: imx_v6_v7_defconfig: Select ADS7846 support
ARM: configs: qualcomm: Add MDM9615 missing defconfigs
ARM: multi_v7_defconfig: Enable vivid driver as a module
ARM: exynos_defconfig: Enable vivid driver as a module
ARM: defconfig: enable the MSM8660 pin controller
ARM: imx_v6_v7_defconfig: enable USB FFS gadget
ARM: socfpga: enable PL330 DMA in socfpga_defconfig
ARM: socfpga: add PCIe to socfpga_defconfig
ARM: multi_v7_defconfig: defconfig: Enable r8a7792 SoC
ARM: shmobile: defconfig: Enable r8a7792 SoC
ARM: Remove bcm_defconfig
ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
ARM: multi_v7_defconfig: Enable Broadcom STB PWM
...
The Virtual Video Test Driver can be used to emulate video capture and
output devices so it's very useful for testing. Since is not necessary
to boot, can be enabled as module to avoid increasing the kernel size.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
1. Fix samsung-keypad build error if INPUT is selected as module.
The error though depends on some uncommon build settings so it
is not as easy to trigger.
2. Get rid of 'samsung_device_dma_mask' defined but not used warning.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=LR9t
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes
Two fixes for v4.7 cycle for build issues:
1. Fix samsung-keypad build error if INPUT is selected as module.
The error though depends on some uncommon build settings so it
is not as easy to trigger.
2. Get rid of 'samsung_device_dma_mask' defined but not used warning.
* tag 'samsung-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos: don't select keyboard driver
ARM: samsung: improve static dma_mask definition
Signed-off-by: Olof Johansson <olof@lixom.net>
Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that
can be used to {en,de}code video streams by hardware. Enable support for
its driver as a module so the MFC can be tested.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
There are a bunch of media platform drivers under drivers/media/platform/
that are for Samsung SoCs but are not being built with exynos_defconfig.
This patch enables them as a module to improve build coverage for these
drivers and also to allow people use them with proper hardware if modules
are installed. The S5P MFC driver wasn't enabled since it fails to probe.
Only the boolean Kconfig symbols are enabled as built-in, since drivers
are not critical and also to keep the kernel binary image size as small
as possible.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Disable big.LITTLE switcher in order to allow automatic usage of
cpufreq-dt driver on Exynos542x/Exynos5800 SoCs based boards.
This change should not cause any problems as arm_big_little[_dt]
driver (which is using big.LITTLE switcher support to do the "real"
big.LITTLE switching work) is not used on any Exynos SoC based
board currently.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The samsung-keypad driver is implicitly selected by ARCH_EXYNOS4 (why?),
but this fails if CONFIG_INPUT is a loadable module:
drivers/input/built-in.o: In function `samsung_keypad_remove':
drivers/input/keyboard/samsung-keypad.c:461: undefined reference to `input_unregister_device'
drivers/input/built-in.o: In function `samsung_keypad_irq':
drivers/input/keyboard/samsung-keypad.c:137: undefined reference to `input_event'
drivers/input/built-in.o: In function `samsung_keypad_irq':
include/linux/input.h:389: undefined reference to `input_event'
drivers/input/built-in.o: In function `samsung_keypad_probe':
drivers/input/keyboard/samsung-keypad.c:358: undefined reference to `devm_input_allocate_device'
drivers/input/built-in.o:(.debug_addr+0x34): undefined reference to `input_set_capability'
This removes the 'select' as suggested by Krzysztof Kozlowski and
instead enables the driver from the defconfig files.
The problem does not happen on mainline kernels, as we don't normally
build built-in input drivers when CONFIG_INPUT=m, but I am experimenting
with a patch to change this, and the samsung keypad driver showed up
as one example that was silently broken before.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.org/lkml/2016/2/14/55
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Currently only the ondemand and performance CPUFreq policy governors are
enabled in the Exynos defconfig. But the other governors are also useful
for some cases, enable them to allow users change the default if needed.
The options are enabled as module to keep the kernel image size minimal.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The Exynos4412-based Trats2 board has Asahi Kasei AK 3-Axis
Magnetometer, CM36651 proximity/ambient light sensor, MMS114 touchscreen
and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to
get some testing coverage and use its features.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
The driver has been removed so the Kconfig symbol is not valid anymore.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The Exynos SoC provides a Security SubSystem block for accelerating some
cryptographic operations. Enable the driver for it - s5p-secss to
utilize the hardware acceleration.
Currently the s5p-secss driver supports AES in CBC and ECB modes.
However on Odroid XU4 (Exynos5422) and Trats2 (Exynos4412) boards this
change introduces one booting error (because of unaligned buffers):
alg: skcipher: encryption failed on chunk test 1 for ecb-aes-s5p: ret=22
The cbc-aes-s5p properly registers itself and passes self-tests.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Enable the kernel NEON mode and asm/NEON accelerated crypto algorithms
which should bring performance benefits on Exynos SoCs. Enable these as
modules because they are optional, not essential anyhow for platform
booting nor related directly to Exynos Soc. All accelerated algorithms
pass booting self-tests on Odroid XU4 (Exynos5422) and Trats2 (Exynos4412).
Additionally enable cpufreq statistics as they are useful for debugging.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Set following options to a value recommended by systemd (which also
matches the multi_v7 deconfig):
1. Enable AUTOFS4_FS - for systemd.automount [0];
2. Enable BLK_DEV_BSG - SG v4 for recend udev [0][1];
3. Disable UEVENT_HELPER_PATH - legacy hook for hotplug, forked for each
uevent, slows down booting [0];
[0] http://cgit.freedesktop.org/systemd/systemd/tree/README
[1] http://patchwork.ozlabs.org/patch/47921/
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
NFS client is already enabled (NFS_FS) and by default it enables clients
for version 2 and 3. Enable explicitly the version 4 client to utilize
the newer protocol.
The NFS client is especially useful for testing kernel in automated
environments (network boot with network file system).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Enable support for:
1. Haptic motor driver on Trats2 board (Maxim 77693) and Note 4
(Maxim 77843);
2. LED driver on Trats2 board (Maxim 77693).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Enable support for Maxim 8997 Multi Functional Device present on Trats and
Origen boards by toggling on drivers: charger, haptic motor,
LED, RTC and extcon.
This allows to test and usage of these boards with exynos config.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Defconfig updates are kept separate from other branches mostly to avoid
conflicts between the different categories (driver branch enabling something
that has context conflict with SoC options, etc).
A lot of this again is scattered across the various hardware platforms.
multi_v7_defconfig, our "generic" config for most 32-bit platforms has
been gone through by Marvell Berlin maintainers and added most options
they need to run on their hardware. Broadcom NSP is also added there,
and the new Atmel SAMA5D2 (added last release). Rockchip also has display
and other devices supported in that config.
In addition to that, the usual small churn of new options being added
here and there.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KsDh
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Defconfig updates are kept separate from other branches mostly to
avoid conflicts between the different categories (driver branch
enabling something that has context conflict with SoC options, etc).
A lot of this again is scattered across the various hardware
platforms. multi_v7_defconfig, our "generic" config for most 32-bit
platforms has been gone through by Marvell Berlin maintainers and
added most options they need to run on their hardware. Broadcom NSP
is also added there, and the new Atmel SAMA5D2 (added last release).
Rockchip also has display and other devices supported in that config.
In addition to that, the usual small churn of new options being added
here and there"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
ARM: multi_v7_defconfig: enable UniPhier I2C drivers
ARM: multi_v7_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
ARM: exynos_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
ARM: exynos_defconfig: Enable WiFi-Ex as a module instead built-in
ARM: exynos_defconfig: Disable simplefb support
ARM: exynos_defconfig: Enable LEDS for Odroid-XU3/XU4
ARM: multi_v7_defconfig: Enable DWC2 USB driver and USB ethernet gadget
ARM: exynos_defconfig: Enable DWC2 USB driver and USB ethernet gadget
ARM: exynos_defconfig: Enable USB Video Class support
ARM: multi_v7_defconfig: improve multi_v7_defconfig support for Berlin
ARM: tegra: Update multi_v7_defconfig
ARM: multi_v7_defconfig: Add Atmel SDHCI device
ARM: multi_v7_defconfig: Add Atmel Flexcom device
ARM: multi_v7_defconfig: Add Atmel SAMA5D2 SoC
ARM: at91/defconfig: add sama5d2 and its new devices to sama5 defconfig
ARM: at91/defconfig: update at91_dt defconfig
ARM: at91/defconfig: update sama5 defconfig
ARM: configs: Enable FIXED_PHY in multi_v7 defconfig
ARM: configs: update lpc18xx defconfig
ARM: socfpga_defconfig: enable fpga manager
...
Pull drm updates from Dave Airlie:
"I Was Almost Tempted To Capitalise Every Word, but then I decided I
couldn't read it myself!
I've also got one pull request for the sti driver outstanding. It
relied on a commit in Greg's tree and I didn't find out in time, that
commit is in your tree now so I might send that along once this is
merged.
I also had the accidental misfortune to have access to a Skylake on my
desk for a few days, and I've had to encourage Intel to try harder,
which seems to be happening now.
Here is the main drm-next pull request for 4.4.
Highlights:
New driver:
vc4 driver for the Rasberry Pi VPU.
(From Eric Anholt at Broadcom.)
Core:
Atomic fbdev support
Atomic helpers for runtime pm
dp/aux i2c STATUS_UPDATE handling
struct_mutex usage cleanups.
Generic of probing support.
Documentation:
Kerneldoc for VGA switcheroo code.
Rename to gpu instead of drm to reflect scope.
i915:
Skylake GuC firmware fixes
HPD A support
VBT backlight fallbacks
Fastboot by default for some systems
FBC work
BXT/SKL workarounds
Skylake deeper sleep state fixes
amdgpu:
Enable GPU scheduler by default
New atombios opcodes
GPUVM debugging options
Stoney support.
Fencing cleanups.
radeon:
More efficient CS checking
nouveau:
gk20a instance memory handling improvements.
Improved PGOB detection and GK107 support
Kepler GDDR5 PLL statbility improvement
G8x/GT2xx reclock improvements
new userspace API compatiblity fixes.
virtio-gpu:
Add 3D support - qemu 2.5 has it merged for it's gtk backend.
msm:
Initial msm88896 (snapdragon 8200)
exynos:
HDMI cleanups
Enable mixer driver byt default
Add DECON-TV support
vmwgfx:
Move to using memremap + fixes.
rcar-du:
Add support for R8A7793/4 DU
armada:
Remove support for non-component mode
Improved plane handling
Power savings while in DPMS off.
tda998x:
Remove unused slave encoder support
Use more HDMI helpers
Fix EDID read handling
dwhdmi:
Interlace video mode support for ipu-v3/dw_hdmi
Hotplug state fixes
Audio driver integration
imx:
More color formats support.
tegra:
Minor fixes/improvements"
[ Merge fixup: remove unused variable 'dev' that had all uses removed in
commit 4e270f088011: "drm/gem: Drop struct_mutex requirement from
drm_gem_mmap_obj" ]
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (764 commits)
drm/vmwgfx: Relax irq locking somewhat
drm/vmwgfx: Properly flush cursor updates and page-flips
drm/i915/skl: disable display side power well support for now
drm/i915: Extend DSL readout fix to BDW and SKL.
drm/i915: Do graphics device reset under forcewake
drm/i915: Skip fence installation for objects with rotated views (v4)
vga_switcheroo: Drop client power state VGA_SWITCHEROO_INIT
drm/amdgpu: group together common fence implementation
drm/amdgpu: remove AMDGPU_FENCE_OWNER_MOVE
drm/amdgpu: remove now unused fence functions
drm/amdgpu: fix fence fallback check
drm/amdgpu: fix stoping the scheduler timeout
drm/amdgpu: cleanup on error in amdgpu_cs_ioctl()
drm/i915: Fix locking around GuC firmware load
drm/amdgpu: update Fiji's Golden setting
drm/amdgpu: update Fiji's rev id
drm/amdgpu: extract common code in vi_common_early_init
drm/amd/scheduler: don't oops on failure to load
drm/amdgpu: don't oops on failure to load (v2)
drm/amdgpu: don't VT switch on suspend
...
Mixer driver is selected by CONFIG_DRM_EXYNOS_HDMI option. Since Exynos5433
HDMI does not require Mixer. There will be separate options to select Mixer
and HDMI. Adding new option to defconfig before Kconfig will allow to keep
bisectability.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Odroid-XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over
USB 3.0.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The Marvell WiFi-Ex driver tries to load a firmware on probe. So if the
driver is built-in and probed before a firmware is available, this is
not loaded and the chip does not work.
This happens for example if an initramfs isn't used since the driver is
probed before the root filesystem is mounted.
Change the default config since the driver isn't needed for machines to
boot and is more convenient to have it enabled as a module to avoid
requiring an initramfs or to have the firmware built into the kernel.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The simplefb driver allows the kernel to render on a pre-allocated
buffer that's been initialized by firmware before the kernel boots.
This option was enabled to have display working on the Exynos5250
Snow Chromebook by commit da9d0fbf5e ("ARM: exynos: defconfig
update") since proper DRM/KMS support did not exist at that time.
But now that the Exynos DRM driver has support for this hardware,
there is no need to have simplefb enabled. In fact, if a user has
a u-boot that injects the simplefb dev node to the FDT before pass
it to the kernel, display won't be properly initialized and only a
blank screen will be shown since there isn't a proper handoff from
the simplefb driver to the Exynos DRM driver.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
Tested-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Odroid XU3 family boards come with RGB LEDs. Enabling LEDS_GPIO and
LEDS_PWM allows monitoring the board alive state (heartbeat) and
MMC/SDcard IO usage.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
[k.kozlowski: Rewritten the commit message]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards,
so enable DWC2 driver as well as the most common USB Ethernet gadget.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have a built-in
Silicon Motion USB UVC WebCam. Enable support for the USB Video Class
driver and its needed media Kconfig symbols so the camera is supported.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
This is a collection of a few late fixes and other misc. stuff that
had dependencies on things being merged from other trees.
The bulk of the changes are for samsung/exynos SoCs for some changes
that needed a few minor reworks so ended up a bit late. The others
are mainly for qcom SoCs: a couple fixes and some DTS updates.
There's one conflict with drivers/cpufreq/exynos-cpufreq.c because
it's now been completely removed, but there were some fixes that hit
mainline in the meantime.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIbBAABAgAGBQJV8fkAAAoJEFk3GJrT+8Zllf8P9jj3+TnvbJS/8bWoQoB7BRUZ
LZPgi2+sBXylrBV60uQdyodiTHQUMZhbL7GvgEVG0z6yyin7nyijqNkulTbQbWmg
WhumLNCNcs8vlZegA/corbwgcVC7FkjOP97HveTe2mgwZ+GaXj9qMRQzBsMqSXEo
4890ZeP1nWBTP42oXOQHkNyKWFBjuERK0dTw2MXj7WE0/Ag8i7ERp76uJQdQ7V5O
BpNRwxp3vSCky8rxbpD/avWdlspv1yZGBQyLeIreVq2YQFojvT36K8wHcf6iWBT/
pzGGV/uZM7MnrGZdqSfVEMDHl7Z2s7Ls+sv5F6Md7ErnVDerHGRjw/6lJDjbeH7u
trucpsuhz5yhTjpZssGHH2NT8pWxxh8M+AaNOiiH8PuYESAbPAmWLpWkn+648bIn
P++Z90DIyfNEqnNSMHkcQYpVt8zc4g75gZfTIIsXLB+DLgzgSK8ergrfyRN/O0zj
oFY35g3wHdgisnGve+BAW30zTZtP19TMT36OltWjIkjuRZC29PS2vkH8eTETdVXx
01f/qcpbB1L1rXfIBjNkjx81j89XPd68JIBfctTF5QBOAGm/Dix6tj2mU/N7TNu5
TrBmD3CXdOQbCPaoK/qWX7/b11IN/XOlGL06hhYwbSdvCVy7rNccApXvfnrDWziK
Ly923FP1OB7h0Kk1cmo=
=85Ck
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull late ARM SoC updates from Kevin Hilman:
"This is a collection of a few late fixes and other misc stuff that had
dependencies on things being merged from other trees.
The bulk of the changes are for samsung/exynos SoCs for some changes
that needed a few minor reworks so ended up a bit late. The others
are mainly for qcom SoCs: a couple fixes and some DTS updates"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
ARM: multi_v7_defconfig: Enable PBIAS regulator
soc: qcom: smd: Correct fBLOCKREADINTR handling
soc: qcom: smd: Use correct remote processor ID
soc: qcom: smem: Fix errant private access
ARM: dts: qcom: msm8974-sony-xperia-honami: Use stdout-path
ARM: dts: qcom: msm8960-cdp: Use stdout-path
ARM: dts: qcom: msm8660-surf: Use stdout-path
ARM: dts: qcom: ipq8064-ap148: Use stdout-path
ARM: dts: qcom: apq8084-mtp: Use stdout-path
ARM: dts: qcom: apq8084-ifc6540: Use stdout-path
ARM: dts: qcom: apq8074-dragonboard: Use stdout-path
ARM: dts: qcom: apq8064-ifc6410: Use stdout-path
ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path
ARM: dts: qcom: Label serial nodes for aliasing and stdout-path
reset: ath79: Fix missing spin_lock_init
reset: Add (devm_)reset_control_get stub functions
ARM: EXYNOS: switch to using generic cpufreq driver for exynos4x12
cpufreq: exynos: Remove unselectable rule for arm-exynos-cpufreq.o
ARM: dts: add iommu property to JPEG device for exynos4
ARM: dts: enable SPI1 for exynos4412-odroidu3
...
Use vendor prefixes for Kconfig symbols and filenames. This should make
it easier to identify the various bridge drivers and to organize the
directory.
v2: fix object name for dw-hdmi (Fabio Estevam)
Signed-off-by: Thierry Reding <treding@nvidia.com>
The likelihood of getting a large number of panel drivers from different
vendors is quite high. Add a prefix to the two existing Samsung panel
drivers to set a guideline for future patch submissions. Using vendor
prefixes consistently should allow a cleaner organization of the tree.
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
With the latest patches the cpufreq-dt can be used on multiple
Exynos SoCs: 3250, 4210, 4212, 4412 and 5250.
Enable it along with default ondemand governor to conserve the energy,
reduce temperature while maintaining acceptable performance.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
The Exynos5420 Peach Pit and Exynos5800 Peach Pi Chromebooks have
IIO based ADC thermistors. Enable built-in support for its driver.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Enable CONFIG_SND_SOC_ODROIDX2 and CONFIG_SND_SIMPLE_CARD to enable
sound on Odroid-XU3 board using the max98090 audio codec.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Enable CONFIG_SENSORS_PWM_FAN on exynos_defconfig to control fan
power on Odroid-XU3.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
This patch does 'savedefconfig' for exynos_defconfig to remove useless
configs and check its dependencies. Sometimes some configs could be
ignored because of the dependencies even they are enabled in defconfig
file manually. So checking the dependencies would be better.
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Enable the Exynos DSI and S6E8AA0 panel for full X11 display on Trats2.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Many Exynos boards have an HDMI port so enable Exynos DRM HDMI
support.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
This patch enables the options to mount a rootfs over NFS and also
support for automatic configuration of IP addresses during boot as
needed by NFS.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Exynos Chromebooks have an Embedded Controller known as the ChromeOS EC
Enable the driver that provides an interface to access from user-space.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Current Exynos CPU idle driver supports entering AFTR (Arm Off, Top
Running) mode on Exynos 4210 (coupled), Exynos 4x12 and Exynos 5250.
Enable it in default configuration to reduce energy consumption.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Javier Martinez Canillas