This patch adds Comedi driver for Humusoft MF634 (PCIe) and
MF624 (PCI) data acquisition cards. The legacy card Humusoft
MF614 is not supported. More info about the cards may be found
at http://humusoft.cz/produkty/datacq/
The driver was tested with both cards. Everything seems to work
properly. Just the basic functionality of the card (DIO, ADC, DAC)
is supported by this driver.
Signed-off-by: Rostislav Lisovy <lisovy@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The COMEDI_MITE driver is a wrapper for the National Instruments
PCI MITE ASIC. This driver includes the PCI boilerplate used to
remap the resources as well as the support code for bus mastered
DMA.
The ni_6527 does not support DMA and the COMEDI_MITE driver adds
unnecessary complexity.
Remove the need for the COMEDI_MITE driver by handling the ioremap
directly in the (*attach). Store the ioremap'ed address in the
private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As pointed out by the kbuild test robot, the ni_atmio driver includes
ni_mio_common.c which uses the helper functions in the comedi_fc module.
Select the COMEDI_FC module when COMEDI_NI_ATMIO is enabled to fix the
following build error:
ERROR: "cfc_write_array_to_buffer" [drivers/staging/comedi/drivers/ni_atmio.ko] undefined!
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Fastwel UNIOxx-5 is a PC/104 board, so put COMEDI_UNIOXX5 under
COMEDI_ISA_DRIVERS.
The DIL/Net-PC 1486 is a 486 system, so put COMEDI_SSV_DNP under
COMEDI_MISC_DRIVERS and add a dependency on X86_32 || COMPILE_TEST.
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Embedded systems with a PC/104 bus might have a configuration that
does not have ISA enabled. This creates a problem in Comedi where
the PC/104 drivers cannot be enabled.
Remove the 'depends on ISA' for the "Comedi ISA and PC/104 drivers"
menu to allow the user to select these drivers on non-ISA systems.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The COMEDI_NI_ATMIO configuration option causes the "ni_atmio" module to
be built, which handles various National Instruments ISA-PNP data
acquisition cards. The configuration option currently depends on
ISAPNP.
The "ni_atmio" module is a "legacy" comedi driver with no
auto-configuration support and it doesn't register as a PNP card driver.
The only difference in initialization from the other comedi ISA card
drivers is that it will use the ISA-PNP functions to find, attach and
activate the card if no I/O base address has been specified by the user
in the COMEDI_DEVCONFIG ioctl.
The module compiles fine without the ISAPNP configuration option as the
<linux/isapnp.h> and <linux/pnp.h> headers provide dummy inline
functions if the ISAPNP and PNP options, respectively, are not enabled.
Remove the dependancy on the ISAPNP option since the module builds
without it and can be used without it.
(There is a very slim chance that comedi will support proper ISA PNP
drivers one day, in which case the ni_atmio driver could be converted to
use this support and not support manual configuration. However, not all
the PnP IDs of boards supported by this driver are currently known to
us.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The COMEDI_NI_ATMIO16D configuration option causes the "ni_atmio16d"
module to be built, which handles the National Instruments AT-MIO-16 and
AT-MIO-16D cards. The configuration option currently depends on ISAPNP,
but the module doesn't use any ISAPNP functions and the cards are legacy
ISA cards with base I/O port, IRQ and DMA channel configured by jumpers.
(The driver doesn't use DMA though.)
Remove the ISADNP dependancy from COMEDI_NI_ATMIO16D and fix up the help
text - the card names are missing a dash and they're not ISA-PNP.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After migrating ISA DMA support from the "ni_labpc" module to the new
"ni_labpc_isadma" module, the `COMEDI_NI_LABPC_ISA` configuration option
no longer depends on `VIRT_TO_BUS`, so remove the dependency.
(The new `COMEDI_NI_LABPC_ISADMA` option does depend on `VIRT_TO_BUS`
but is not configured manually and is only selected automatically if the
`VIRT_TO_BUS` and `ISA_DMA_API` options are set.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's just an empty module at the moment, selected by COMEDI_NI_LABPC_ISA
&& ISA_DMA_API && VIRT_TO_BUS, but will be populated by later patches to
migrate ISA DMA support for NI Lab-PC cards out of the "ni_labpc"
module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver can support the WinSystems PCM-IO48 PC/104 board. That
board has two 8255 devices providing 48 digital I/O channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Intelligent Instrumentation PCI-20001C board is a legacy PC/XT/AT
8-bit ISA board not a PCI board. The "PCI" appears to mean "Personal
Computer Instrumentation".
Move the Kconfig option into the COMEDI_ISA group.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ICP P8R8-DIO ISA boards can be supported by this driver. This board
has 8 isolated digital outputs and 8 isolated digital outputs.
Add support for this board to the pcl730 driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ACL-7225b and P16R16R-DIO ISA boards can be supported by this driver.
These board have 16 isolated digital outputs and 16 isolated digital
outputs.
Add support for these boards to the pcl730 driver and remove the
standalone acl7225b driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCL-734 ISA board can be supported by this driver. This board has
32 isolated digital outputs.
Add support for the PCL-734 board to the pcl730 driver and remove it
from the poc driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCL-733 ISA board can be supported by this driver. This board has
32 isolated digital inputs.
Add support for the PCL-733 board to the pcl730 driver and remove it
from the poc driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCL-725 ISA board can be supported by this driver. This board has
8 isolated digital inputs and 8 isolated digital outputs.
Add support for the PCL-725 board to the pcl730 driver and remove the
standalone pcl725 driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCM-3730 PC/104 board has the same register i/o map as the PCL-730
ISA board. The only difference is the number of isolated digital input
and output channels.
Add support for the PCM-3770 board to the pcl730 driver and remove the
standalone pcm3730 driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Sensoray Model 526 board is a PC/104 style board not a PCI board.
Move it into the correct group in the Kconfig and Makefile.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The core "comedi" module and the "mite" helper module for NI PCI devices
both have calls to `dma_alloc_coherent()` and `dma_free_coherent()`.
Those functions are only available if `CONFIG_HAS_DMA` is defined.
Apart from the "mite" module, the functions are only called for comedi
drivers that set `s->async_dma_dir` (where `s` is a pointer to a `struct
comedi_subdevice`) to anything other than `DMA_NONE`.
Change local helper functions `__comedi_buf_alloc()` and
`__comedi_buf_free()` to only call `dma_alloc_coherent()` and
`dma_free_coherent()` if `CONFIG_HAS_DMA` is defined.
Change the "Kconfig" to make the following configuration options depend
on `HAS_DMA`:
`COMEDI_MITE` - builds the "mite" module.
`COMEDI_NI_6527` - selects `COMEDI_MITE`.
`COMEDI_NI_65XX` - selects `COMEDI_MITE`.
`COMEDI_NI_670X` - selects `COMEDI_MITE`.
`COMEDI_NI_LABPC_PCI` - selects `COMEDI_MITE`.
`COMEDI_NI_PCIDIO` - selects `COMEDI_MITE`.
`COMEDI_NI_TIOCMD` - selects `COMEDI_MITE`.
`COMEDI_NI_660X` - selects `COMEDI_NI_TIOCMD`,
sets `s->async_dma_dir`.
`COMEDI_NI_PCIMIO` - selects `COMEDI_NI_TIOCMD`,
sets `s->async_dma_dir`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the ni_labpc driver is used by the legacy (ISA), PCI, and
PCMCIA versions of the LabPC board. The driver is enabled under the
COMEDI_PCI_DRIVERS section of the Kconfig. This means that PCI support
must be enabled in order to use the ni_labpc driver for the PCI or
PCMCIA drivers.
Split the PCI support code out of the ni_labpc driver into a separate
driver, ni_labpc_pci. The PCMCIA support is already slip out as
ni_labpc_cs.
Modify the Kconfig so that the common code in ni_labpc is enabled by the
Kconfig option COMEDI_NI_LABPC. The ISA support code is currently still
in the ni_labpc driver but is only compiled in if COMEDI_NI_LABPC_ISA is
also enabled.
This allows the PCI and PCMCIA drivers to be enabled without the need
for the ISA stuff.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "amplc_pc263" module is a hybrid driver for Amplicon PC263 (ISA) and
PCI263 (PCI) and uses conditional compilation (and compiler
optimization) to compile in the support for the different bus types.
Split out support for the PCI263 into a new module "amplc_pci263",
retaining support for the PC263 in the existing module "amplc_pc263".
Don't bother supporting the legacy attach mechanism for PCI board in the
new module as that is no longer in vogue for the comedi drivers and the
PCI263 board has no special configuration requirements.
Although the code to handle the single subdevice of each board is the
same for both drivers, this is only a small amount of code and I don't
think it's worth creating a common module to handle it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After splitting support for PCI cards out of the "amplc_dio200" module
into "amplc_dio200_pci", the help text needs updating.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florent Boudet reports success using a NI PXI-6624 board with a
trivially modified version of the "ni_660x" driver (addition to the PCI
device ID table and comedi board table). He did this with the
out-of-tree Comedi drivers at www.comedi.org, but it applies equally to
the in-tree "staging" drivers.
He reports the PXI-6624 is basically the same as the PXI-6602, but with
isolated channels and external voltage source.
Add support for NI PXI-6224 to the "ni_660x" driver.
(Maybe the driver should be renamed to "ni_66xx"?)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Florent Boudet <flboudet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New comedi driver for Advantech PCI-1724U with modifications by Ian
Abbott <abbotti@mev.co.uk>.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmh6jj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split the bus specific ISA/PC-104 and PCI code out of this driver
and create two new drivers, das08_isa and das08_pci.
This allows removing all the #ifdef'ery in the das08 driver that
handled if the CONFIG_COMEDI_DAS08_{ISA,PCI} options were enabled.
It also makes the PCI driver cleanly Plug-and-Play since the comedi
driver only has an auto_attach callback. Previously it also had an
attach callback in order to handle the ISA cards.
Since the PCMCIA support was already split out, we can also remove
the now unused enum das08_bustype and it's use in the boardinfo.
The bus specific code deals with the bustype automatically before
it calls the common attach function in das08.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Separate the comedi_pcmcia_* functions out of drivers.c into a new
source file, comedi_pcmcia.c. This allows conditionally building
support for comedi pcmcia drivers into the comedi core without the
need for the #if'defery. Fix the Kconfig and Makefile appropriately.
Group all the comedi_pcmcia_* prototypes into one place in comedidev.h.
Protect these prototypes with an #ifdef so that building a comedi
pcmcia driver without PCMCIA support will cause a build error. This
will normally not happen as long as the comedi pcmcia driver is placed
in the proper group in the Kconfig.
Remove the #include <pcmcia/*.h> from drivers.c. These includes are only
needed by the comedi pcmcia driver support code and the pcmcia drivers.
The include should occur in those files.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Separate the comedi_pci_* functions out of drivers.c into a new
source file, comedi_pci.c. This allows conditionally building
support for comedi PCI drivers into the comedi core. Fix the
Kconfig and Makefile appropriately.
Group all the comedi_pci_* prototypes and related defines into one
place in comedidev.h. Protect these prototypes with an #ifdef and
provide some dummy functions so that the mixed ISA/PCI comedi
drivers will still build correctly.
Remove the #include <linux/pci.h> from comedidev.h and drivers.c. This
include is only needed by the comedi PCI driver support code and the
PCI drivers. The include should occur in those files.
Also, remove the #include <linux/pci.h> from a couple non-PCI drivers
since it's not needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Separate the comedi_usb_* functions out of drivers.c into a new
source file, comedi_usb.c. This allows conditionally building
support for comedi USB drivers into the comedi core without the
need for the #if'defery. Fix the Kconfig and Makefile appropriately.
For aesthetic reasons, add some whitespace to the Makefile to keep
everything lined up.
Group all the comedi_usb_* prototypes into one place in comedidev.h.
Protect these prototypes with an #ifdef so that building a comedi
usb driver without USB support will cause a build error. This will
normally not happen as long as the comedi USB driver is placed in
the proper group in the Kconfig.
Remove the #include<linux/usb.h> from comedidev.h and drivers.c. This
include is only needed by the comedi USB driver support code and the
USB drivers. The include should occur in those files.
Removing the include of usb.h exposed a couple drivers that need
<linux/interrupt.h> and <linux/sched.h>. Add the missing includes.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
m68k allmodconfig:
CC [M] drivers/staging/comedi/drivers/pcl812.o
drivers/staging/comedi/drivers/pcl812.c: In function ‘pcl812_ai_cmd’:
drivers/staging/comedi/drivers/pcl812.c:736: error: implicit declaration of function ‘set_dma_mode’
drivers/staging/comedi/drivers/pcl812.c:736: error: ‘DMA_MODE_READ’ undeclared (first use in this function)
drivers/staging/comedi/drivers/pcl812.c:736: error: (Each undeclared identifier is reported only once
drivers/staging/comedi/drivers/pcl812.c:736: error: for each function it appears in.)
drivers/staging/comedi/drivers/pcl812.c:737: error: implicit declaration of function ‘claim_dma_lock’
drivers/staging/comedi/drivers/pcl812.c:738: error: implicit declaration of function ‘clear_dma_ff’
drivers/staging/comedi/drivers/pcl812.c:739: error: implicit declaration of function ‘set_dma_addr’
drivers/staging/comedi/drivers/pcl812.c:740: error: implicit declaration of function ‘set_dma_count’
drivers/staging/comedi/drivers/pcl812.c:741: error: implicit declaration of function ‘release_dma_lock’
drivers/staging/comedi/drivers/pcl812.c:742: error: implicit declaration of function ‘enable_dma’
drivers/staging/comedi/drivers/pcl812.c: In function ‘interrupt_pcl812_ai_dma’:
drivers/staging/comedi/drivers/pcl812.c:883: error: implicit declaration of function ‘disable_dma’
drivers/staging/comedi/drivers/pcl812.c:884: error: ‘DMA_MODE_READ’ undeclared (first use in this function)
drivers/staging/comedi/drivers/pcl812.c: In function ‘pcl812_ai_poll’:
drivers/staging/comedi/drivers/pcl812.c:947: error: implicit declaration of function ‘get_dma_residue’
make[2]: *** [drivers/staging/comedi/drivers/pcl812.o] Error 1
CC [M] drivers/staging/comedi/drivers/pcl816.o
drivers/staging/comedi/drivers/pcl816.c: In function ‘interrupt_pcl816_ai_mode13_dma’:
drivers/staging/comedi/drivers/pcl816.c:359: error: implicit declaration of function ‘disable_dma’
drivers/staging/comedi/drivers/pcl816.c:366: error: implicit declaration of function ‘set_dma_mode’
drivers/staging/comedi/drivers/pcl816.c:366: error: ‘DMA_MODE_READ’ undeclared (first use in this function)
drivers/staging/comedi/drivers/pcl816.c:366: error: (Each undeclared identifier is reported only once
drivers/staging/comedi/drivers/pcl816.c:366: error: for each function it appears in.)
drivers/staging/comedi/drivers/pcl816.c:367: error: implicit declaration of function ‘claim_dma_lock’
drivers/staging/comedi/drivers/pcl816.c:369: error: implicit declaration of function ‘set_dma_addr’
drivers/staging/comedi/drivers/pcl816.c:372: error: implicit declaration of function ‘set_dma_count’
drivers/staging/comedi/drivers/pcl816.c:378: error: implicit declaration of function ‘release_dma_lock’
drivers/staging/comedi/drivers/pcl816.c:379: error: implicit declaration of function ‘enable_dma’
drivers/staging/comedi/drivers/pcl816.c: In function ‘pcl816_ai_cmd’:
drivers/staging/comedi/drivers/pcl816.c:629: error: ‘DMA_MODE_READ’ undeclared (first use in this function)
drivers/staging/comedi/drivers/pcl816.c:631: error: implicit declaration of function ‘clear_dma_ff’
drivers/staging/comedi/drivers/pcl816.c: In function ‘pcl816_ai_poll’:
drivers/staging/comedi/drivers/pcl816.c:679: error: implicit declaration of function ‘get_dma_residue’
make[2]: *** [drivers/staging/comedi/drivers/pcl816.o] Error 1
CC [M] drivers/staging/comedi/drivers/pcl818.o
drivers/staging/comedi/drivers/pcl818.c: In function ‘interrupt_pcl818_ai_mode13_dma’:
drivers/staging/comedi/drivers/pcl818.c:547: error: implicit declaration of function ‘disable_dma’
drivers/staging/comedi/drivers/pcl818.c:550: error: implicit declaration of function ‘set_dma_mode’
drivers/staging/comedi/drivers/pcl818.c:550: error: ‘DMA_MODE_READ’ undeclared (first use in this function)
drivers/staging/comedi/drivers/pcl818.c:550: error: (Each undeclared identifier is reported only once
drivers/staging/comedi/drivers/pcl818.c:550: error: for each function it appears in.)
drivers/staging/comedi/drivers/pcl818.c:551: error: implicit declaration of function ‘claim_dma_lock’
drivers/staging/comedi/drivers/pcl818.c:552: error: implicit declaration of function ‘set_dma_addr’
drivers/staging/comedi/drivers/pcl818.c:555: error: implicit declaration of function ‘set_dma_count’
drivers/staging/comedi/drivers/pcl818.c:561: error: implicit declaration of function ‘release_dma_lock’
drivers/staging/comedi/drivers/pcl818.c:562: error: implicit declaration of function ‘enable_dma’
drivers/staging/comedi/drivers/pcl818.c: In function ‘pcl818_ai_mode13dma_int’:
drivers/staging/comedi/drivers/pcl818.c:886: error: ‘DMA_MODE_READ’ undeclared (first use in this function)
drivers/staging/comedi/drivers/pcl818.c:888: error: implicit declaration of function ‘clear_dma_ff’
make[2]: *** [drivers/staging/comedi/drivers/pcl818.o] Error 1
CC [M] drivers/staging/comedi/drivers/das16.o
drivers/staging/comedi/drivers/das16.c: In function ‘das16_cmd_exec’:
drivers/staging/comedi/drivers/das16.c:644: error: implicit declaration of function ‘claim_dma_lock’
drivers/staging/comedi/drivers/das16.c:645: error: implicit declaration of function ‘disable_dma’
drivers/staging/comedi/drivers/das16.c:648: error: implicit declaration of function ‘clear_dma_ff’
drivers/staging/comedi/drivers/das16.c:650: error: implicit declaration of function ‘set_dma_addr’
drivers/staging/comedi/drivers/das16.c:654: error: implicit declaration of function ‘set_dma_count’
drivers/staging/comedi/drivers/das16.c:655: error: implicit declaration of function ‘enable_dma’
drivers/staging/comedi/drivers/das16.c:656: error: implicit declaration of function ‘release_dma_lock’
drivers/staging/comedi/drivers/das16.c: In function ‘disable_dma_on_even’:
drivers/staging/comedi/drivers/das16.c:845: error: implicit declaration of function ‘get_dma_residue’
drivers/staging/comedi/drivers/das16.c: In function ‘das16_attach’:
drivers/staging/comedi/drivers/das16.c:1197: error: implicit declaration of function ‘set_dma_mode’
drivers/staging/comedi/drivers/das16.c:1197: error: ‘DMA_MODE_READ’ undeclared (first use in this function)
drivers/staging/comedi/drivers/das16.c:1197: error: (Each undeclared identifier is reported only once
drivers/staging/comedi/drivers/das16.c:1197: error: for each function it appears in.)
make[2]: *** [drivers/staging/comedi/drivers/das16.o] Error 1
CC [M] drivers/staging/comedi/drivers/das1800.o
drivers/staging/comedi/drivers/das1800.c: In function ‘das1800_flush_dma_channel’:
drivers/staging/comedi/drivers/das1800.c:555: error: implicit declaration of function ‘disable_dma’
drivers/staging/comedi/drivers/das1800.c:559: error: implicit declaration of function ‘clear_dma_ff’
drivers/staging/comedi/drivers/das1800.c:562: error: implicit declaration of function ‘get_dma_residue’
drivers/staging/comedi/drivers/das1800.c: In function ‘das1800_flush_dma’:
drivers/staging/comedi/drivers/das1800.c:586: error: implicit declaration of function ‘claim_dma_lock’
drivers/staging/comedi/drivers/das1800.c:603: error: implicit declaration of function ‘release_dma_lock’
drivers/staging/comedi/drivers/das1800.c: In function ‘das1800_handle_dma’:
drivers/staging/comedi/drivers/das1800.c:622: error: implicit declaration of function ‘set_dma_addr’
drivers/staging/comedi/drivers/das1800.c:624: error: implicit declaration of function ‘set_dma_count’
drivers/staging/comedi/drivers/das1800.c:625: error: implicit declaration of function ‘enable_dma’
drivers/staging/comedi/drivers/das1800.c: In function ‘das1800_init_dma’:
drivers/staging/comedi/drivers/das1800.c:1424: error: implicit declaration of function ‘set_dma_mode’
drivers/staging/comedi/drivers/das1800.c:1424: error: ‘DMA_MODE_READ’ undeclared (first use in this function)
drivers/staging/comedi/drivers/das1800.c:1424: error: (Each undeclared identifier is reported only once
drivers/staging/comedi/drivers/das1800.c:1424: error: for each function it appears in.)
make[2]: *** [drivers/staging/comedi/drivers/das1800.o] Error 1
CC [M] drivers/staging/comedi/drivers/dt282x.o
drivers/staging/comedi/drivers/dt282x.c: In function ‘dt282x_ao_dma_interrupt’:
drivers/staging/comedi/drivers/dt282x.c:328: error: implicit declaration of function ‘disable_dma’
drivers/staging/comedi/drivers/dt282x.c: In function ‘prep_ai_dma’:
drivers/staging/comedi/drivers/dt282x.c:416: error: implicit declaration of function ‘set_dma_mode’
drivers/staging/comedi/drivers/dt282x.c:416: error: ‘DMA_MODE_READ’ undeclared (first use in this function)
drivers/staging/comedi/drivers/dt282x.c:416: error: (Each undeclared identifier is reported only once
drivers/staging/comedi/drivers/dt282x.c:416: error: for each function it appears in.)
drivers/staging/comedi/drivers/dt282x.c:417: error: implicit declaration of function ‘claim_dma_lock’
drivers/staging/comedi/drivers/dt282x.c:418: error: implicit declaration of function ‘clear_dma_ff’
drivers/staging/comedi/drivers/dt282x.c:419: error: implicit declaration of function ‘set_dma_addr’
drivers/staging/comedi/drivers/dt282x.c:420: error: implicit declaration of function ‘set_dma_count’
drivers/staging/comedi/drivers/dt282x.c:421: error: implicit declaration of function ‘release_dma_lock’
drivers/staging/comedi/drivers/dt282x.c:423: error: implicit declaration of function ‘enable_dma’
drivers/staging/comedi/drivers/dt282x.c: In function ‘prep_ao_dma’:
drivers/staging/comedi/drivers/dt282x.c:439: error: ‘DMA_MODE_WRITE’ undeclared (first use in this function)
drivers/staging/comedi/drivers/dt282x.c: In function ‘dt282x_interrupt’:
drivers/staging/comedi/drivers/dt282x.c:471: error: ‘DMA_MODE_READ’ undeclared (first use in this function)
drivers/staging/comedi/drivers/dt282x.c: In function ‘dt282x_ai_cmd’:
drivers/staging/comedi/drivers/dt282x.c:690: error: ‘DMA_MODE_READ’ undeclared (first use in this function)
drivers/staging/comedi/drivers/dt282x.c: In function ‘dt282x_ao_cmd’:
drivers/staging/comedi/drivers/dt282x.c:938: error: ‘DMA_MODE_WRITE’ undeclared (first use in this function)
make[2]: *** [drivers/staging/comedi/drivers/dt282x.o] Error 1
CC [M] drivers/staging/comedi/drivers/ni_at_a2150.o
drivers/staging/comedi/drivers/ni_at_a2150.c: In function ‘a2150_interrupt’:
drivers/staging/comedi/drivers/ni_at_a2150.c:237: error: implicit declaration of function ‘claim_dma_lock’
drivers/staging/comedi/drivers/ni_at_a2150.c:238: error: implicit declaration of function ‘disable_dma’
drivers/staging/comedi/drivers/ni_at_a2150.c:241: error: implicit declaration of function ‘clear_dma_ff’
drivers/staging/comedi/drivers/ni_at_a2150.c:249: error: implicit declaration of function ‘get_dma_residue’
drivers/staging/comedi/drivers/ni_at_a2150.c:286: error: implicit declaration of function ‘set_dma_addr’
drivers/staging/comedi/drivers/ni_at_a2150.c:287: error: implicit declaration of function ‘set_dma_count’
drivers/staging/comedi/drivers/ni_at_a2150.c:288: error: implicit declaration of function ‘enable_dma’
drivers/staging/comedi/drivers/ni_at_a2150.c:290: error: implicit declaration of function ‘release_dma_lock’
drivers/staging/comedi/drivers/ni_at_a2150.c: In function ‘a2150_attach’:
drivers/staging/comedi/drivers/ni_at_a2150.c:794: error: implicit declaration of function ‘set_dma_mode’
drivers/staging/comedi/drivers/ni_at_a2150.c:794: error: ‘DMA_MODE_READ’ undeclared (first use in this function)
drivers/staging/comedi/drivers/ni_at_a2150.c:794: error: (Each undeclared identifier is reported only once
drivers/staging/comedi/drivers/ni_at_a2150.c:794: error: for each function it appears in.)
make[2]: *** [drivers/staging/comedi/drivers/ni_at_a2150.o] Error 1
Make PCL816, PCL818, DAS16, DAS1800, DT282X, and NI_AT_A2150 depend on
ISA_DMA_API to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the addi_watchdog module to provide support for the watchdog
subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the MODULE_DESCRIPTION to something more useful than the
generic "Comedi low-level driver" so that modinfo provides a
better description of the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hopefully all of the arch-specific problems are now resolved, so let's
let this subsystem be enabled on all arches. If there are problems
found, we will fix them up.
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hartleys@visionengravers.com>
Cc: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bernd Porr reports success getting comedi to work on ARM. He writes:
"""
comedi works nicely on the Raspberry PI. I've compiled the rpi kernel
with comedi enabled and it works with the USBDUX-sigma (need to test the
other boards). With comedirecord running I can plot one channel at 1kHz
without buffer overflow (resulting to 70% load).
So, I guess we just need to add "ARM" to Kconfig in the comedi subdir?
depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86 || ARM
I'm running just now 3.2.27 but also the development kernel compiles
with ARM enabled (haven't tested yet).
/Bernd
"""
Enable the COMEDI config option to be selected for ARM.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the addi_watchdog module to provide support for the watchdog
subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many of the ADDI-DATA drivers have a "watchdog" subdevice that can
be used to monitor digital output activity. All the digital outputs
are released (set to 0) if the digital outputs are not accessed, or
the watchdog it not pinged, before the timeout of the watchdog
occurs. The only difference in the drivers for the watchdog subdevice
is the base address used to talk to the watchdog registers.
Instead of duplicating the code needed to support this watchdog,
introduce a helper module, similar to the 8255 module. This module
will be select'ed by the drivers that can use it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'ni_at_a2150' module links to `cfc_write_to_buffer` in the
'comedi_fc' module, so selecting 'COMEDI_NI_AT_A2150' in the kernel config
needs to also select 'COMEDI_FC'.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org> # 3.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only addi-data driver that uses virt_to_bus is addi_apci_3120.
Remove the depends on for the other addi-data drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver does not use virt_to_bus(), remove the depends on for it.
Update the Kconfig entry to list all the boards supported by this
driver. Also, expand the help text a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The low-level hardware support code for these drivers, hwdrv_apci1516.c
and hwdrv_apci2016.c, is identical. Both of these boards are 16 channel
dio boards. The 1516 board has 8 input/8 output channels and the 2016
has 16 output channels.
To ease maintainability, merge the boardinfo and pci device information
from the addi_apci_2016 driver into the addi_apci_1516 driver and modify
the Kconfig and Makefile appropriately.
This allows deleting the addi_apci_2016.c and hwdrv_apci2016.c files.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The addi_apci_3120 and addi_apci_3001 drivers share the same low-level
board support code (hwdrv_apci3120). Merge the boardinfo and PCI_DEVICE
information from the addi_apci_3001 driver into the addi_apci_3120
driver and delete then delete the addi_apci_3001 driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the prompt line and description for the COMEDI_AMPLC_DIO200_PCI
config option to add the new PCIe boards supported by the "amplc_dio200"
driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "amplc_dio200" module no longer depends on the "8255" module, so the
'COMEDI_AMPLC_DIO200' Kconfig setting no longer needs to select
'COMEDI_8255'.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 8255 based boards in the ni_pcidio driver are all simple
memory mapped 8255 boards that don't require the dma support
provided by the mite driver.
Move the support for these boards from the ni_pcidio driver to
the generic 8255_pci driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the Measurement Computing PCI-DIO96H board to the
generic 8255_pci driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the support for the boards in the cb_pcidio driver to
the generic 8255_pci driver and remove the cb_pcidio driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver will be used for all generic PCI based 8255 digital
i/o boards. Rename the driver accordingly..
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently this driver only supports the 96-channel PCI-7296.
The 24 and 48 channel PCI-7224 and PCI-7248 boards share the
same register map and just have less 8255 devices providing
the i/o channels.
This adds the PCI PnP support for the other boards in the
ADLink PCI-72xx series.
Also, remove the legacy attach using the comedi_config utility.
This driver now supports the comedi PCI auto config attach
mechanism and the legacy attach is not supported or required
by this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The boards supported by these drivers are now handled by the
adl_pci7x3x driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the ADLink PCI-7230 and PCI-7432 Isolated Digital
I/O Boards are supported using two drivers (adl_pci7230 and
adl_pci7432). These drivers are very similar and only differ
in the total number of di/do channels provided.
This driver combines the support for both boards into one
common driver. In addition, it adds PCI PnP support for the
other boards in the ADLink PCI-723x and PCI-743x series.
This driver only supports the comedi PCI auto config attach
mechanism. The legacy attach using the comedi_config utility
is not supported or required by this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the CONFIG_COMEDI_MITE config options into the `if
COMEDI_PCI_DRIVERS` block so that the `depends on PCI` condition can be
omitted. Move the CONFIG_COMEDI_NI_TIOCMD config option to the same
block as it selects COMEDI_MITE. Move the CONFIG_COEMDI_NI_TIO config
option slightly for aesthetic reasons without changing its conditions.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
