Individual controller driver has different requirement for wakeup
setting, so move it from core to itself. In order to align with
current etting the default wakeup setting is enabled (except for
chipidea host).
Pass compile test with below commands:
make O=outout/all allmodconfig
make -j$CPU_NUM O=outout/all drivers/usb
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Buffer depth of 50 units is not sufficient when there is considerable delay
occuring on air due to interference, increase ISOC IN buffer depth to 100 units.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reset PORT_ENABLE bit of port status on loosing PD.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have icreased interrupt end point buffer size to 512 bytes,
Change variable data type to accomodate it.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Increase interrupt end point buffer size & convert hard coded
value to macro for better readability.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use macro instead of hard coded value for readability.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check for valid config number before completing set interface.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check if interface number is correct before creating an end point.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not allocate a port to new device or process URB when its status is
yet to be read. This avoids race condition when USB core read hub
status a bit late, while new device tries to acquire port.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should not use extra variable just to copy pointer value,
renaming parameter name serves pupose & removes extra variable.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are assigning value to hport before returning, there is
no need to initialize it.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch separates success & failure block along with fixing
following issues:-
1. The way oz_hcd_pd_arrived() looks now it's easy to think we free "ep" but
actually we do this spaghetti thing of setting it to NULL on success.
2. It is hard to read it because there are unlocks scattered throughout.
3. Currently we set "ep" to NULL on the success path and then test it and or
free it. In current code you have to scroll to the start of the function
to read code.
Original patch was submitted by Dan here :-
http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2013-August/040113.html
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Swap arguments of oz_ep_alloc() to match kmalloc() for better readability.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove variable initialization wherever it is not required.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are already checking "ep" earlier in function. Do not
need to check again.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Put spaces around math operations.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a blank line between global declarations &
functions for readability.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds blank line between declaration &
code for readability.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a bug where we were not returning correct hub status
for 8th port.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure that we reset port configuration no. when PD departs.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes following build warning.
drivers/built-in.o: In function `oz_hcd_heartbeat':
>> (.text+0x30aadd): undefined reference to `__divdi3'
drivers/built-in.o: In function `oz_hcd_heartbeat':
>> (.text+0x30ac85): undefined reference to `__divdi3'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current implementation assumes HZ = 1000 for calculating
all internal timer intervals, which creates problem on
platforms where HZ != 1000.
As well we need resolution of less than 10 mSec for heartbeat
calculation, this creates problem on some platforms where HZ is
configured as HZ = 100, or around, which restricts us to timer interval
of 10 mSec. This is particularly found on embedded devices.
This patch moves on to use high resolution timers to calculate
all timer intervals as it allows us to have very small resolution
of timer interval, removing dependency on HZ.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce new debug macros: oz_dbg, oz_cdev_dbg, oz_pd_dbg
and then replace old oz_trace & oz_trace2 with new macro.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary debug logs. Most of these logs
print function name at the start of function, which
are not really required.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes event tracing code as it can be replaced
by in-kernel tracing infrastructure.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the access byteorder of wMaxPacketSize
which is __le16, following the USB standard, and needs to
be converted into native cpu byteorder in order to be accessed.
Instead of using le16_to_cpu(hep->desc.wMaxPacketSize),
it was used the usb_endpoint_maxp() function, defined in
<uapi/linux/usb/ch9.h>
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch marks function parameters that are used read only
as well as readonly structs (and corresponding pointers) as const.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sparse complains about the following functions
ozhcd.c:330:20: warning: symbol 'oz_uncancel_urb' was not declared. Should it be static?
ozhcd.c:420:6: warning: symbol 'oz_complete_buffered_urb' was not declared. Should it be static?
ozmain.c:25:6: warning: symbol 'g_net_dev' was not declared. Should it be static?
ozevent.c:95:5: warning: symbol 'oz_events_open' was not declared. Should it be static?
ozevent.c:110:5: warning: symbol 'oz_events_release' was not declared. Should it be static?
ozevent.c:121:9: warning: symbol 'oz_events_read' was not declared. Should it be static?
ozevent.c:160:30: warning: symbol 'oz_events_fops' was not declared. Should it be static?
ozcdev.c:47:14: warning: symbol 'g_oz_class' was not declared. Should it be static?
ozcdev.c:74:5: warning: symbol 'oz_cdev_open' was not declared. Should it be static?
ozcdev.c:86:5: warning: symbol 'oz_cdev_release' was not declared. Should it be static?
ozcdev.c:94:9: warning: symbol 'oz_cdev_read' was not declared. Should it be static?
ozcdev.c:146:9: warning: symbol 'oz_cdev_write' was not declared. Should it be static?
ozcdev.c:236:6: warning: symbol 'oz_cdev_ioctl' was not declared. Should it be static?
ozcdev.c:300:14: warning: symbol 'oz_cdev_poll' was not declared. Should it be static?
ozcdev.c:321:30: warning: symbol 'oz_fops' was not declared. Should it be static?
ozproto.c:958:6: warning: context imbalance in 'oz_polling_lock_bh' - wrong count at exit
ozproto.c:964:6: warning: context imbalance in 'oz_polling_unlock_bh' - unexpected unlock
ozusbsvc1.c:308:6: warning: symbol 'oz_usb_handle_ep_data' was not declared. Should it be static?
ozpd.c:410:6: warning: symbol 'oz_set_more_bit' was not declared. Should it be static?
ozpd.c:418:6: warning: symbol 'oz_set_last_pkt_nb' was not declared. Should it be static?
-> add static keyword to silence the warning and make sparse happy.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ozcdev.c and ozhcd.c should include their own header file, so sparse
knows which functions are declared and which not.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the warning "Using plain integer as NULL pointer",
generated by sparse, by replacing the offending 0s with NULL.
If the initialization with NULL was unnecessary (due to unconditional
assignment before first use) it was removed.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch ae926051d7: "staging: ozwpan: Added USB HCD
implementation" from Feb 20, 2012, leads to the following warning:
drivers/staging/ozwpan/ozhcd.c:1094 oz_hcd_heartbeat()
warn: what is this condition about? 'ep->buffered_units * 50'
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some driver uses tasklet_disable in device remove/release process,
tasklet_disable will inc tasklet->count and return. If the tasklet
is not handled yet under some softirq pressure, the tasklet will be
placed on the tasklet_vec, never have a chance to be excuted. This might
lead to a heavy loaded ksoftirqd, wakeup with pending_softirq, but
tasklet is disabled. tasklet_kill should be used in this case.
Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Cc: Rupesh Gujare <rgujare@ozmodevices.com>
Cc: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using list_move_tail() instead of list_del() + list_add_tail().
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes issue where wrong retrun value was received
by userland application after writing data to raw hid device.
Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes issue caused due to different HZ
value on system which do not have HZ=1000
Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For interrupt end point buffer frames, if urb is not available
& give back as soon as urb is received from usb core.
Signed-off-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch fixes a typo that I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel already has a debug allocator, no need to have one unique to
a single driver. So delete it, replace with kfree, kmalloc, and, in a
few places that need it, kzalloc().
Cc: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added the implementation of the virtual USB HCD that is used to
present devices connected via the network to the USB subsystem.
Signed-off-by: Chris Kelly <ckelly@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
