[ Upstream commit 40249c6962 ]
Using gcov to collect coverage data for kernels compiled with GCC 10.1
causes random malfunctions and kernel crashes. This is the result of a
changed GCOV_COUNTERS value in GCC 10.1 that causes a mismatch between
the layout of the gcov_info structure created by GCC profiling code and
the related structure used by the kernel.
Fix this by updating the in-kernel GCOV_COUNTERS value. Also re-enable
config GCOV_KERNEL for use with GCC 10.
Reported-by: Colin Ian King <colin.king@canonical.com>
Reported-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Tested-and-Acked-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 87c9366e17 upstream.
This reverts commit 786b2384bf ("um: Enable CONFIG_CONSTRUCTORS").
There are two issues with this commit, uncovered by Anton in tests
on some (Debian) systems:
1) I completely forgot to call any constructors if CONFIG_CONSTRUCTORS
isn't set. Don't recall now if it just wasn't needed on my system, or
if I never tested this case.
2) With that fixed, it works - with CONFIG_CONSTRUCTORS *unset*. If I
set CONFIG_CONSTRUCTORS, it fails again, which isn't totally
unexpected since whatever wanted to run is likely to have to run
before the kernel init etc. that calls the constructors in this case.
Basically, some constructors that gcc emits (libc has?) need to run
very early during init; the failure mode otherwise was that the ptrace
fork test already failed:
----------------------
$ ./linux mem=512M
Core dump limits :
soft - 0
hard - NONE
Checking that ptrace can change system call numbers...check_ptrace : child exited with exitcode 6, while expecting 0; status 0x67f
Aborted
----------------------
Thinking more about this, it's clear that we simply cannot support
CONFIG_CONSTRUCTORS in UML. All the cases we need now (gcov, kasan)
involve not use of the __attribute__((constructor)), but instead
some constructor code/entry generated by gcc. Therefore, we cannot
distinguish between kernel constructors and system constructors.
Thus, revert this commit.
Cc: stable@vger.kernel.org [5.4+]
Fixes: 786b2384bf ("um: Enable CONFIG_CONSTRUCTORS")
Reported-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
We do need to call the constructors for *modules*, and
at least for KASAN in the future, we must call even the
kernel constructors only later when the kernel has been
initialized.
Instead of relying on libc to call them, emit an empty
section for libc and let the kernel's CONSTRUCTORS code
do the rest of the job.
Tested that it indeed doesn't work in modules, and does
work after the fixes in both, with a few functions with
__attribute__((constructor)) in both dynamic and static
builds.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LLVM uses profiling data that's deliberately similar to GCC, but has a
very different way of exporting that data. LLVM calls llvm_gcov_init()
once per module, and provides a couple of callbacks that we can use to
ask for more data.
We care about the "writeout" callback, which in turn calls back into
compiler-rt/this module to dump all the gathered coverage data to disk:
llvm_gcda_start_file()
llvm_gcda_emit_function()
llvm_gcda_emit_arcs()
llvm_gcda_emit_function()
llvm_gcda_emit_arcs()
[... repeats for each function ...]
llvm_gcda_summary_info()
llvm_gcda_end_file()
This design is much more stateless and unstructured than gcc's, and is
intended to run at process exit. This forces us to keep some local
state about which module we're dealing with at the moment. On the other
hand, it also means we don't depend as much on how LLVM represents
profiling data internally.
See LLVM's lib/Transforms/Instrumentation/GCOVProfiling.cpp for more
details on how this works, particularly GCOVProfiler::emitProfileArcs(),
GCOVProfiler::insertCounterWriteout(), and GCOVProfiler::insertFlush().
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20190417225328.208129-1-trong@android.com
Signed-off-by: Greg Hackmann <ghackmann@android.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Tri Vo <trong@android.com>
Co-developed-by: Nick Desaulniers <ndesaulniers@google.com>
Co-developed-by: Tri Vo <trong@android.com>
Tested-by: Trilok Soni <tsoni@quicinc.com>
Tested-by: Prasad Sodagudi <psodagud@quicinc.com>
Tested-by: Tri Vo <trong@android.com>
Tested-by: Daniel Mentz <danielmentz@google.com>
Tested-by: Petri Gynther <pgynther@google.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_GCOV_FORMAT_AUTODETECT compiles either gcc_3_4.c or gcc_4_7.c
according to your GCC version.
We can achieve the equivalent behavior by setting reasonable dependency
with the knowledge of the compiler version.
If GCC older than 4.7 is used, GCOV_FORMAT_3_4 is the default, but users
are still allowed to select GCOV_FORMAT_4_7 in case the newer format is
back-ported.
On the other hand, If GCC 4.7 or newer is used, there is no reason to
use GCOV_FORMAT_3_4, so it should be hidden.
If you downgrade the compiler to GCC 4.7 or older, oldconfig/syncconfig
will display a prompt for the choice because GCOV_FORMAT_3_4 becomes
visible as a new symbol.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Enabling gcov is counterproductive to compile testing: it significantly
increases the kernel image size, compile time, and it produces lots
of false positive "may be used uninitialized" warnings as the result
of missed optimizations.
This is in line with how UBSAN_SANITIZE_ALL and PROFILE_ALL_BRANCHES
work, both of which have similar problems.
With an ARM allmodconfig kernel, I see the build time drop from
283 minutes CPU time to 225 minutes, and the vmlinux size drops
from 43MB to 26MB.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Following the suggestions from Andrew Morton and Stephen Rothwell,
Dont expand the ARCH list in kernel/gcov/Kconfig. Instead,
define a ARCH_HAS_GCOV_PROFILE_ALL bool which architectures
can enable.
set ARCH_HAS_GCOV_PROFILE_ALL on Architectures where it was
previously allowed + ARM64 which I tested.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Following up the arm testing of gcov, turns out gcov on ARM64 works fine
as well. Only change needed is adding ARM64 to Kconfig depends.
Tested with qemu and mach-virt
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enable gcov support for ARM based on original patches by David
Singleton and George G. Davis
Riku - updated to patch to current mainline kernel. The patch
has been submitted in 2010, 2012 - for symmetry, now in 2014 too.
https://lwn.net/Articles/390419/http://marc.info/?l=linux-arm-kernel&m=133823081813044
v2: remove arch/arm/kernel from gcov disabled files
Cc: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Vincent Sanders <vincent.sanders@collabora.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Selecting GCOV for UML causing configuration mismatch:
warning: (GCOV_KERNEL) selects CONSTRUCTORS which has unmet direct dependencies (!UML)
Constructors are not needed for UML.
Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_CONSTRUCTORS controls support for running constructor functions at
kernel init time. According to commit b99b87f70c ("kernel:
constructor support"), gcov (CONFIG_GCOV_KERNEL) needs this. However,
CONFIG_CONSTRUCTORS currently defaults to y, with no option to disable it,
and CONFIG_GCOV_KERNEL depends on it. Instead, default it to n and have
CONFIG_GCOV_KERNEL select it, so that the normal case of
CONFIG_GCOV_KERNEL=n will result in CONFIG_CONSTRUCTORS=n.
Observed in the short list of =y values in a minimal kernel configuration.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch enables gcov kernel profiling over the whole kernel for sh.
Profiling of specific files individually already worked. A handful of
files have to be explicitly excluded from the profiling to avoid
breaking things, notably pmb.c.
Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Make it possible to enable GCOV code coverage measurement on powerpc.
Lightly tested on 64-bit, seems to work as expected.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Enable gcov profiling of the entire kernel on x86_64. Required changes
include disabling profiling for:
* arch/kernel/acpi/realmode and arch/kernel/boot/compressed:
not linked to main kernel
* arch/vdso, arch/kernel/vsyscall_64 and arch/kernel/hpet:
profiling causes segfaults during boot (incompatible context)
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enable the use of GCC's coverage testing tool gcov [1] with the Linux
kernel. gcov may be useful for:
* debugging (has this code been reached at all?)
* test improvement (how do I change my test to cover these lines?)
* minimizing kernel configurations (do I need this option if the
associated code is never run?)
The profiling patch incorporates the following changes:
* change kbuild to include profiling flags
* provide functions needed by profiling code
* present profiling data as files in debugfs
Note that on some architectures, enabling gcc's profiling option
"-fprofile-arcs" for the entire kernel may trigger compile/link/
run-time problems, some of which are caused by toolchain bugs and
others which require adjustment of architecture code.
For this reason profiling the entire kernel is initially restricted
to those architectures for which it is known to work without changes.
This restriction can be lifted once an architecture has been tested
and found compatible with gcc's profiling. Profiling of single files
or directories is still available on all platforms (see config help
text).
[1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Oberparleiter