The memset() got moved out of the check for _IOC_NONE, so passing a
made-up command number with a size but no direction would allow clearing
data on user-provided pointers.
Move video_get_user() back into the _IOC_NONE check where it belongs.
Reported-by: syzbot+54fd8cca4b7226c94b8e@syzkaller.appspotmail.com
Fixes: 6c625c01c7a6 ("media: v4l2-core: split out data copy from video_usercopy")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The IR device on Hi3796CV300 SoC is mostly same as hix5hd2, except the
following two things.
- IR_CLK offset is 0x60 instead of 0x48.
- It needs to set an extra bit in IR_ENABLE register to enable IR.
The following changes are made to deal with them.
- Define a SoC specific data to accommodate IR_CLK offset and the flag
telling requirement of extra enable bit.
- Create function hix5hd2_ir_enable() to handle IR enabling. The original
hix5hd2_ir_enable() is all about managing IR clock, so gets renamed
to hix5hd2_ir_clk_enable().
- Device table hix5hd2_ir_table[] gets moved forward, as it's being
used by hix5hd2_ir_probe() now.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Resetting buf without resetting pusi_seen at a channel-switch can lead
to copying the rest of a section to the start of buf, but treating it as
a complete section, when the next pusi arrives.
EIT-sections starting without valid header were randomly received during
an EIT-scan on a transponder.
Signed-off-by: Johann Friedrichs <johann.friedrichs@web.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch fixes the following scripts/checkpatch.pl errors:
ERROR: space required before the open parenthesis '('
+ switch(input) {
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch fixes the following scripts/checkpatch.pl error:
ERROR: open brace '{' following function definitions go on the next line
+static int as102_fe_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings *settings) {
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Replaces printk with pr_err to fix warnings from checkpatch.pl
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix checkpatch.pl error by adding a blank line
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Change foo* bar to foo *bar to avoid ERROR: POINTER_LOCATION in checkpatch
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_signal_strength(struct dvb_frontend* fe, u16* strength)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_signal_strength(struct dvb_frontend* fe, u16* strength)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_snr(struct dvb_frontend* fe, u16* snr)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_snr(struct dvb_frontend* fe, u16* snr)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_sleep(struct dvb_frontend* fe)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_init(struct dvb_frontend* fe)
ERROR: "foo* bar" should be "foo *bar"
+static void dvb_dummy_fe_release(struct dvb_frontend* fe)
ERROR: "foo* bar" should be "foo *bar"
+ struct dvb_dummy_fe_state* state = fe->demodulator_priv;
ERROR: "foo* bar" should be "foo *bar"
+struct dvb_frontend* dvb_dummy_fe_ofdm_attach(void)
ERROR: "foo* bar" should be "foo *bar"
+ struct dvb_dummy_fe_state* state = NULL;
ERROR: "foo* bar" should be "foo *bar"
+ struct dvb_dummy_fe_state* state = NULL;
ERROR: "foo* bar" should be "foo *bar"
+ struct dvb_dummy_fe_state* state = NULL;
remove 'extern' keyword from declaration
Fix CHECK:AVOID_EXTERNS: extern prototypes should be avoided in .h files
by removing it.
Fix long lines
Break long lines into smaller ones to improve readability.
WARNING: line over 80 characters
+ memcpy(&state->frontend.ops, &dvb_dummy_fe_ofdm_ops, sizeof(struct dvb_frontend_ops));
WARNING: line over 80 characters
+ memcpy(&state->frontend.ops, &dvb_dummy_fe_qpsk_ops, sizeof(struct dvb_frontend_ops));
WARNING: line over 80 characters
+ memcpy(&state->frontend.ops, &dvb_dummy_fe_qam_ops, sizeof(struct dvb_frontend_ops));
WARNING: line over 80 characters
+ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
WARNING: line over 80 characters
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
WARNING: line over 80 characters
+ FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
WARNING: line over 80 characters
+ .symbol_rate_min = (57840000 / 2) / 6
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
drivers/media/dvb-frontends/dib0070.c:192:52: warning: format specifies type 'short' but the argument has type 's8' (aka 'signed char') [-Wformat]
dprintk("CAPTRIM=%hd; ADC = %hd (ADC) & %dmV\n", state->captrim, adc, (u32) adc*(u32)1800/(u32)1024);
~~~ ^~~~~~~~~~~~~~
%hhd
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:203:59: warning: format specifies type 'short' but the argument has type 's8' (aka 'signed char') [-Wformat]
dprintk("CAPTRIM=%hd is closer to target (%hd/%hd)\n", state->captrim, adc, state->adc_diff);
~~~ ^~~~~~~~~~~~~~
%hhd
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:367:46: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("Tuning for Band: %hd (%d kHz)\n", band, freq);
~~~ ^~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:445:39: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("REFDIV: %hd, FREF: %d\n", REFDIV, FREF);
~~~ ^~~~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:447:57: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("Num: %hd, Den: %hd, SD: %hd\n", (u16) Rest, Den, (state->lo4 >> 12) & 0x1);
~~~ ^~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:447:62: warning: format specifies type 'short' but the argument has type 'int' [-Wformat]
dprintk("Num: %hd, Den: %hd, SD: %hd\n", (u16) Rest, Den, (state->lo4 >> 12) & 0x1);
~~~ ^~~~~~~~~~~~~~~~~~~~~~~~
%d
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:448:33: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("HFDIV code: %hd\n", state->current_tune_table_index->hfdiv);
~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:449:27: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("VCO = %hd\n", state->current_tune_table_index->vco_band);
~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:450:40: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("VCOF: ((%hd*%d) << 1))\n", state->current_tune_table_index->vco_multi, freq);
~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
drivers/media/dvb-frontends/dib7000p.c:918:37: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("SPLIT %p: %hd\n", demod, agc_split);
~~~ ^~~~~~~~~
%hhu
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
drivers/media/dvb-frontends/dib7000m.c:811:38: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("SPLIT %p: %hd\n", demod, agc_split);
~~~ ^~~~~~~~~
%hhu
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl4SYegeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG4m4H+QGCUN8SXN+2B+0/
BfzOf7PFoKzAx3NwDbJQIZqhSl+Zfa4n3VGPEF8sXsvoQgdYvuJnS/5JiAZ9iRIH
HAfFzegzQ3mCl8Du+SqCvQKs2Jt4OMCX62KGRebRBhpoKfZdwmN7n7pn9lWO771K
9rxTpeItXhmK46jOFRbi5oyQfmkfSfyUN1b9CB53FXFS+ZDkDNA7QQiIYnKOD7SZ
RrL7czhZ580QOC61qOlnz1GIhRzvU5SXg4OtuI3YfoOJRY5FKC3YtOgLReT0vPs+
vEhAyP93upVXIhqm10WHNjd4t4a45Vy5ff64uFsQ9QV4nnqsC2C70YwWbVDdtz/W
Lm0mvE8=
=NECs
-----END PGP SIGNATURE-----
Merge tag 'v5.5-rc5' into patchwork
Linux 5.5-rc5
* tag 'v5.5-rc5': (1006 commits)
Linux 5.5-rc5
Documentation: riscv: add patch acceptance guidelines
riscv: prefix IRQ_ macro names with an RV_ namespace
clocksource: riscv: add notrace to riscv_sched_clock
apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock
hexagon: define ioremap_uc
ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less
ocfs2: call journal flush to mark journal as empty after journal recovery when mount
mm/hugetlb: defer freeing of huge pages if in non-task context
mm/gup: fix memory leak in __gup_benchmark_ioctl
mm/oom: fix pgtables units mismatch in Killed process message
fs/posix_acl.c: fix kernel-doc warnings
hexagon: work around compiler crash
hexagon: parenthesize registers in asm predicates
fs/namespace.c: make to_mnt_ns() static
fs/nsfs.c: include headers for missing declarations
fs/direct-io.c: include fs/internal.h for missing prototype
mm: move_pages: return valid node id in status if the page is already on the target node
memcg: account security cred as well to kmemcg
kcov: fix struct layout for kcov_remote_arg
...
This header file now only includes the cros_ec_dev struct, however, is the
'include/linux/platform_data/cros_ec_proto.h' who contains the definition of
all the Chrome OS EC related structs. There is no reason to have a
separate include for this struct so move to the place where other
structs are defined. That way, we can remove the include itself, but also
simplify the common pattern
#include <linux/mfd/cros_ec.h>
#include <linux/platform_data/cros_ec_proto.h>
for a single include
#include <linux/platform_data/cros_ec_proto.h>
The changes to remove the cros_ec.h include were generated with the
following shell script:
git grep -l "<linux/mfd/cros_ec.h>" | xargs sed -i '/<linux\/mfd\/cros_ec.h>/d'
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=kakx
-----END PGP SIGNATURE-----
Merge tag 'media/v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some fixes at CEC core to comply with HDMI 2.0 specs and fix some
border cases
- a fix at the transmission logic of the pulse8-cec driver
- one alignment fix on a data struct at ipu3 when built with 32 bits
* tag 'media/v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: intel-ipu3: Align struct ipu3_uapi_awb_fr_config_s to 32 bytes
media: pulse8-cec: fix lost cec_transmit_attempt_done() call
media: cec: check 'transmit_in_progress', not 'transmitting'
media: cec: avoid decrementing transmit_queue_sz if it is 0
media: cec: CEC 2.0-only bcast messages were ignored
The A10/A20 Allwinner SoCs have two camera sensor interface blocks,
named CSI0 and CSI1. The two have the same register layouts with
slightly different features:
- CSI0 has an image signal processor (ISP); CSI1 doesn't
- CSI0 can support up to four separate channels under CCIR656;
CSI1 can only support one
- CSI0 can support up to 16-bit wide bus with YUV422;
CSI1 can support up to 24-bit wide bus with YUV444
For now the driver doesn't support wide busses, nor CCIR656. So the
only relevant difference is whether a clock needs to be taken and
enabled for the ISP.
Add structs to record the differences, tie them to the compatible
strings, and deal with the ISP clock. Support for the new CSI1
hardware block is added as well.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
On Allwinner SoCs, some high memory bandwidth devices do DMA directly
over the memory bus (called MBUS), instead of the system bus. These
devices include the CSI camera sensor interface, video (codec) engine,
display subsystem, etc.. The memory bus has a different addressing
scheme without the DRAM starting offset.
Deal with this using the "interconnects" property from the device tree,
or if that is not available, set dev->dma_pfn_offset to PHYS_PFN_OFFSET.
Fixes: 577bbf23b7 ("media: sunxi: Add A10 CSI driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Allwinner camera sensor interface has a different definition of
[HV]sync. While the timing diagram uses the names HSYNC and VSYNC,
the note following the diagram and register names use HREF and VREF.
Combined they imply the hardware uses either [HV]REF or inverted
[HV]SYNC. There are also registers to set horizontal skip lengths
in pixels and vertical skip lengths in lines, also known as back
porches.
Fix the polarity handling by using the opposite polarity flag for
the checks. Also rename `[hv]sync_pol` to `[hv]ref_pol` to better
match the hardware register description.
Fixes: 577bbf23b7 ("media: sunxi: Add A10 CSI driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CLK_POL field specifies whether data is sampled on the falling or
rising edge of PCLK, not whether the data lines are active high or low.
Evidence of this can be found in the timing diagram labeled "horizontal
size setting and pixel clock timing".
Fix the setting by checking the correct flag, V4L2_MBUS_PCLK_SAMPLE_RISING.
While at it, reorder the three polarity flag checks so HSYNC and VSYNC
are grouped together.
Fixes: 577bbf23b7 ("media: sunxi: Add A10 CSI driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This driver supports both the mt9v032 (color) and the mt9v022 (mono)
sensors. Depending on which sensor is used, the format from the sensor is
different. The format.code inside the dev struct holds this information.
The enum mbus and enum frame sizes need to take into account both type of
sensors, not just the color one. To solve this, use the format.code in
these functions instead of the hardcoded bayer color format (which is only
used for mt9v032).
[Sakari Ailus: rewrapped commit message]
Suggested-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The variable _rate is by ov5640_compute_sys_clk() which returns
zero if the PLL exceeds 1GHz. Unfortunately, the check to see
if the max PLL1 output is checking 'rate' and not '_rate' and
'rate' does not ever appear to be 0.
This patch changes the check against the returned value of
'_rate' to determine if the PLL1 output exceeds 1GHz.
Fixes: aa2882481c ("media: ov5640: Adjust the clock based on the expected rate")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the various modes are placed into a table, but when
ov5640_find_mode is called, it has to double check whether
or not the requested framerate is tolerated by the mode.
The determination is based on checking hact, vact, and frame rate.
Only 640x480 is allowed at 60fps and QSXGA is limited to 15fps, but
as the number of permitted frame rates change, this will begin to
add more and more complexity to the check.
This patch simplifies the check by adding the max framerate
allowed for each mode into the table of modes. It then compares
the requested framerate to the max permitted in the mode's table.
This reduces the number of comparisions to one down from three
at run-time.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If there was an error in starting streaming, put the runtime usage count
of the device.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of keeping track of the power state ourselves, let runtime PM
handle it.
This also splits handling controls between side effect management and
writing the new configuration to the sensor's registers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The omap3isp driver set the new buffer and enabled the CCDC in a situation
a new buffer was available but streaming was about to be stopped on the
CCDC. This lead to frequent system crashes in case there were buffers
queued when streming was being stopped.
Fix this by first checking whether there's an intent to stop streaming and
if there isn't, then set the new buffer and re-enable CCDC.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The isp was marked to have failed to stop if stopping streaming on an
external subdev failed. The return value from the external subdev should
be ignored instead as it is not part of the ISP and thus the ISP does not
need to be reset for that reason.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Seems to be a clone of Logilink VG0022A. Supports DVB-C, DVB-T and
DVB-T2. Only terrestrial reception was tested on Polish and Czech
multiplexes.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
At least on my system with a self-made IR receiver, my kernel log is filled
with:
serial_ir serial_ir.0: ignoring spike: 1 1 1419988034627194ns 1419956080709377ns
These messages happen at random and do not prevent the receiver from
working. Also I cannot change the features of the IC, therefore they are not
useful. Probably they are not useful at all.
However they fill the console, they accumulate and fill the dmesg log, by
doing this, they prevent me from seeing important message.
Signed-off-by: Bodo Eggert <7eggert@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This adds support for the PROlectrix DV107669 DVT-T dongle which
uses an RTL2832 and FC0012 tuner.
Tests:
- Verified correct operation of DVB-T reception with VLC across
several UK multiplexes
Signed-off-by: David J. Fiddes <D.J@fiddes.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix checkpatch.pl error by adding a blank line
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
dvb_dummy_fe.c had all its EXPORT_SYMBOL macros located at the end of the
file. Now these are located directly below the symbol they are exporting
for increased readability.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This solves the following compiler warnings:
drivers/media/usb/dvb-usb/cxusb.c: In function ‘cxusb_gpio_tuner’:
drivers/media/usb/dvb-usb/cxusb.c:128:35: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
128 | deb_info("gpio_write failed.\n");
| ^
drivers/media/usb/dvb-usb/cxusb.c: In function ‘cxusb_bluebird_gpio_rw’:
drivers/media/usb/dvb-usb/cxusb.c:145:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
145 | deb_info("bluebird_gpio_write failed.\n");
| ^
drivers/media/usb/dvb-usb/cxusb.c: In function ‘cxusb_i2c_xfer’:
drivers/media/usb/dvb-usb/cxusb.c:251:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
251 | deb_i2c("i2c read may have failed\n");
| ^
drivers/media/usb/dvb-usb/cxusb.c:274:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
274 | deb_i2c("i2c write may have failed\n");
| ^
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It is not a fatal error if reading the mac address or the remote control
decoder state fails.
Reported-by: syzbot+ec869945d3dde5f33b43@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If usb_bulk_msg() fails, actual_length can be uninitialized.
Reported-by: syzbot+9d42b7773d2fecd983ab@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This results in an uninitialized variable read.
Reported-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for the four new variants of ioctl commands for 64-bit time_t
in v4l2_buffer.
The existing v4l2_buffer32 structure for the traditional format gets
changed to match the new v4l2_buffer format, and the old layout is
now called v4l2_buffer32_time32. Neither of these matches the native
64-bit architecture format of v4l2_buffer, so both require special
handling in compat code.
Duplicating the existing handlers for the new types is a safe conversion
for now, but unfortunately this may turn into a maintenance burden
later. A larger-scale rework of the compat code might be a better
alternative, but is out of scope of the y2038 work.
Note: x32 support for v4l2_buffer32 has always been broken and remains
so after this change, fixing it would have required even more duplication,
and apparently nobody has cared so far.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: remove spurious newline]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The native code supports the variant of struct v4l2_event for 64-bit
time_t, so add the compat version as well.
Here, a new incompatibility arises: while almost all 32-bit architectures
now use the same layout as 64-bit architectures and the commands can
simply be passed through, on x86 the internal alignment of v4l2_event
is different because of the 64-bit member in v4l2_event_ctrl.
To handle all architectures, this now requires defining four different
versions of the structure to cover all possible combinations. The compat
handling for VIDIOC_DQEVENT32 and VIDIOC_DQEVENT32_TIME32 is now inside
of an #ifdef so it does not get used on architectures other than x86.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The v4l2_buffer structure contains a 'struct timeval' member that is
defined by the user space C library, creating an ABI incompatibility
when that gets updated to a 64-bit time_t.
As in v4l2_event, handle this with a special case in video_put_user()
and video_get_user() to replace the memcpy there.
Since the structure also contains a pointer, there are now two
native versions (on 32-bit systems) as well as two compat versions
(on 64-bit systems), which unfortunately complicates the compat
handler quite a bit.
Duplicating the existing handlers for the new types is a safe
conversion for now, but unfortunately this may turn into a
maintenance burden later. A larger-scale rework of the
compat code might be a better alternative, but is out of scope
of the y2038 work.
Sparc64 needs a special case because of their special suseconds_t
definition.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The v4l2_event structure contains a 'struct timespec' member that is
defined by the user space C library, creating an ABI incompatibility
when that gets updated to a 64-bit time_t.
While passing a 32-bit time_t here would be sufficient for CLOCK_MONOTONIC
timestamps, simply redefining the structure to use the kernel's
__kernel_old_timespec would not work for any library that uses a copy
of the linux/videodev2.h header file rather than including the copy from
the latest kernel headers.
This means the kernel has to be changed to handle both versions of the
structure layout on a 32-bit architecture. The easiest way to do this
is during the copy from/to user space.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The copy-in/out portions of video_usercopy() are about to
get more complex, so turn then into separate functions as
a cleanup first.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The do_video_ioctl() compat handler converts the compat command
codes into the native ones before processing further, but this
causes problems for 32-bit user applications that pass a command
code that matches a 64-bit native number, which will then be
handled the same way.
Specifically, this breaks VIDIOC_DQEVENT_TIME from user space
applications with 64-bit time_t, as the structure layout is
the same as the native 64-bit layout on many architectures
(x86 being the notable exception).
Change the handler to use the converted command code only for
passing into the native ioctl handler, not for deciding on the
conversion, in order to make the compat behavior match the
native behavior.
Actual support for the 64-bit time_t version of VIDIOC_DQEVENT_TIME
and other commands still needs to be added in a separate patch.
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As a preparation for adding 64-bit time_t support in the uapi,
change the drivers to no longer care about the format of the
timestamp field in struct v4l2_buffer.
The v4l2_timeval_to_ns() function is no longer needed in the
kernel after this, but there is userspace code relying on
it to be part of the uapi header.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: replace spaces by tabs]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAl34lkkACgkQ/lWMcqZw
E8M76g//WRYl9fWnV063s44FBVJYjGxaus0vQJSGidaPCIE6Ep6TNjXp8DVzV82M
HR79P9glL02DC9B8pflioNNXdIRGSVk/FJcKVB2seFAqEFCAknvWDM/X/y+mOUpp
fUeFl+Znlwx3YlM8f4Qujdbm+CbTewfbya4VAWeWd8XG2V8jfq5cmODPPlUMNenZ
J6Ja+W3ph741uSIfAKaP69LVJgOcuUjXINE4SWhRk/i5QF3GIRej/A7ZjWGLQ/t2
2zUUF7EiCzhPomM40H3ddKtXb4ZjNJuc5pOD4GpxR8ciNbe2gUOHEZ5aenwYBdsU
5MwbxNKyMbKXATtn3yv3fSc4jH3DtmEKpmovONeO8ZDBrQBnxeYa3tQvfkNghA2f
acoZMzYUImV+ft6DMIgpXppASvo7mQYDAbLPOGEJ9E44AL4UP00jesEjnK5FOHSR
3BEzGUnK/6QL5zFNPni8YZQ8dan4jDIno1mqIV+cQ4WCGlaKckzIWO6243Bf13b/
kROSJpgWkiK6Ngq0ofhD0MHyT/m1QnqUzWRKTJhRtPflSWRBsDZqWCQ5Vx1QlNIE
/HfTNbTpXWwa+5wXbbB8TkDw5t9cQGnR+QcrEd9HgoIec7B5Re8rx9i0TJAT4N05
03RCQCecSfD8gwKd2wgaFIpFGRl9lTdLYSpffSmyL2X5a20lZhM=
=b15X
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
The v4l2-compliance tests failed with the touch device when multiplanar was
enabled in vivid. Since it is perfectly fine to support the multiplanar API
for touch, add support for this in vivid.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is no reason to prohibit multiplanar support for touch devices,
so just allow it.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The v4l2_buffer's 'field' value was never initialized in vivid for the
touch capture device, causing v4l2-compliance errors.
Set it to NONE.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Log (if debug > 0) when a CEC message is received.
This is done for transmits already, so it makes sense to do the
same for receives.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Don't schedule the next ping before the current ping is
sent, schedule it after.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Don't free everything in the disconnect callback, instead use
the adap_free callback, which is called when the last open
filehandle is closed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It turns out that received CEC messages can arrive faster than
can be processed by the CEC framework, resulting in lost messages.
Instead of storing only one CEC message, store up to 8.
Also fix a bug where the EOM bit wasn't checked for a received
message of length 1, so POLL messages weren't properly reported.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of adap_transmit waiting until the full message
is transmitted (and thus hoarding the adap->lock mutex), have it
kick off a transmit workqueue. This prevents adap->lock from
being locked for a very long time.
Also skip FAILED_ACK reports for broadcast messages: this makes
no sense, and it seems a spurious message coming from the
Pulse-Eight, since some time later I see the SUCCEEDED message.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of translating work_result to a transmit_done status
in pulse8_irq_work_handler(), pass the CEC_TX_STATUS via a
new tx_done_status field.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use debug level 2 to show the low-level Pulse-Eight commands.
Also show the message to transmit on debug level 1 and add a
debug log to show where the transmit failed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drop the write_lock, rename config_lock to plain lock since this
now locks access to the adapter. Use 'lock' when transmitting
a message, ensuring that nothing interferes with the transmit.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reorganize the order of the functions in the source, going from
low-level to high-level.
No functional changes were made.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add and use pulse8_msgname() to show the message codes as a
human readable text instead of a number.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The AD7611 chip supports the same Deep Color Mode settings as the AD7604.
This change extends support for this feature to the AD7611 by adding a
wrapper function for the `read_hdmi_pixelclock` hook and adding the same
frequency adjustment logic.
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for the sink pad of scaler subdevice to respond
VIDIOC_G_SELECTION and VIDIOC_S_SELECTION ioctls with the following
targets: V4L2_SEL_TGT_COMPOSE_BOUNDS and V4L2_SEL_TGT_CROP.
* Add new const struct crop_rect_default to initialize subdev scaler
properly.
* Make changes in sink pad format reflect to the crop rectangle. E.g.
changing the frame format to a smaller size one can make the former
crop rectangle selects a non existing frame area. To solve this
situation the crop rectangle is clamped to the frame boundaries.
* Clamp crop rectangle respecting the sink bounds during set_selection
ioctl.
Co-developed-by: Danilo Figueiredo Rocha <drocha.figueiredo@gmail.com>
Signed-off-by: Guilherme Alcarde Gallo <gagallo7@gmail.com>
Signed-off-by: Danilo Figueiredo Rocha <drocha.figueiredo@gmail.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
MediaTek encoder allocates non pixel data area for an input buffer every
plane. As the input buffer should be read-only, the driver should not write
anything in the buffer. Therefore, the extra data should be unnecessary.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When requesting format from sensor, some sensors call the
subdev_get_try_crop which for ISI was not properly initialized, and this
causes errors in determining proper image resolutions.
To accommodate for this, when trying a format (in try_fmt), first attempt
to obtain the framesize for this format from sensor.
In case this fails, use the maximum ISI width/height as try_crop, otherwise
provide the first size height/width from the sensor.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In try_fmt, properly initialize the pad_cfg variable to zeros.
This can be used by various calls from the subdev, so it's better
to have it initialized.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[hverkuil-cisco@xs4all.nl: changed {0} to {}]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This adds support for GREY and Y16 formats, based on Y10 mbus codes.
Y16 needs to go through preview path in the ISI, with 2 pixels per word,
and it fits the Y16 format. The ISI data lines need to be MSB aligned with
the sensor data lines.
GREY format in 8 bits per pixel is done by dropping the 2 LSB bits
from the Y10 format, and packed as 4 pixels per word.
Suggested-by: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When requesting format from sensor, some sensors call the
subdev_get_try_crop which for ISC was not properly initialized, and this
causes errors in determining proper image resolutions.
To accommodate for this, when trying a format (in try_fmt), first attempt
to obtain the framesize for this format from sensor.
In case this fails, use the maximum ISC width/height as try_crop, otherwise
provide the first size height/width from the sensor.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[hverkuil-cisco@xs4all.nl: changed {0} to {}]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With some sensors, the mbus code must match the one that sensor supports.
In this case we should initialize the mbus_code of the fse/fie before
calling the subdev, and not after.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In try_fmt, properly initialize the pad_cfg variable to zeros.
This can be used by various calls from the subdev, so it's better
to have it initialized.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[hverkuil-cisco@xs4all.nl: changed {0} to {}]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The ISC can receive input from sensors using Y10 format directly
(10 bits greyscale). In this case, the ISC must dump the data directly,
either as GREY (8bit) or Y10 (10bit).
Y16 is not supported because we cannot align the MSB 10 bits to the MSB
inside the 16bit container.
For this format, the ISC internal pipeline cannot work (only works with
BAYER), so we must dump the data directly as 8bit/10bit.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In case the format that the sensor sends is 8 bit only (like GREY for
example) we need to be able to bypass ISC pipeline and directly dump
8 bits.
That's why the hardcoded value of 16 bpp is not correct in all cases.
This change allows the output format to decide what is the correct bpp
(bits per pixel) such that the result is in the proper format.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When decoding using the CODA internal rotator (for example NV12
capture), currently the value vb2_buf.index + CODA_MAX_FRAMEBUFFERS (19)
is written into the DEC_PIC_ROT_INDEX register. At least with firmware
version 3.1.1 this causes CODA hangups as soon as the register value
reaches 32. Instead, always write CODA_MAX_FRAMEBUFFERS.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Both platform_get_irq_byname() and platform_get_irq() already print an
error. Remove the redundant error message.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch adds JPEG encoding support for CODA960, handling the JPEG
hardware directly. A separate JPEG encoder video device is created due
to the separate hardware unit and different supported pixel formats.
While the hardware can not change subsampling on the fly, it can encode
4:2:2 subsampled images into JPEGs of the same subsampling.
There are two additional tracepoints added to the coda driver that can
be used together with the v4l2:v4l2_qbuf and v4l2:v4l2_dqbuf tracepoints
to to follow video frames through the mem2mem device when encoding or
decoding with the CODA960 JPEG codec:
coda:coda_jpeg_run
coda:coda_jpeg_done
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
[hverkuil-cisco@xs4all.nl: removed unused k and q_data_dst variables]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CODA960 JPEG codec is controlled directly from the host, there is no
support in the BIT processor firmware. This patch adds the necessary
register definitions.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Huffman bits tables are always 16 bytes long, and they are always
followed directly by the values tables, both in hardware and in JPEG
files. Just merge the two tables.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Always call finish_run when the hardware signals completion. This
will allow JPEG contexts to clean up even if job_abort was called
during the device_run.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The periodic PING command could interfere with the result of
a CEC transmit, causing a lost cec_transmit_attempt_done()
call.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v4.10 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently wait_event_interruptible_timeout is called in cec_thread_func()
when adap->transmitting is set. But if the adapter is unconfigured
while transmitting, then adap->transmitting is set to NULL. But the
hardware is still actually transmitting the message, and that's
indicated by adap->transmit_in_progress and we should wait until that
is finished or times out before transmitting new messages.
As the original commit says: adap->transmitting is the userspace view,
adap->transmit_in_progress reflects the hardware state.
However, if adap->transmitting is NULL and adap->transmit_in_progress
is true, then wait_event_interruptible is called (no timeout), which
can get stuck indefinitely if the CEC driver is flaky and never marks
the transmit-in-progress as 'done'.
So test against transmit_in_progress when deciding whether to use
the timeout variant or not, instead of testing against adap->transmitting.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 32804fcb61 ("media: cec: keep track of outstanding transmits")
Cc: <stable@vger.kernel.org> # for v4.19 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
WARN if transmit_queue_sz is 0 but do not decrement it.
The CEC adapter will become unresponsive if it goes below
0 since then it thinks there are 4 billion messages in the
queue.
Obviously this should not happen, but a driver bug could
cause this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v4.12 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some messages are allowed to be a broadcast message in CEC 2.0
only, and should be ignored by CEC 1.4 devices.
Unfortunately, the check was wrong, causing such messages to be
marked as invalid under CEC 2.0.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v4.10 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
snd_ivtv_pcm_ioctl() does nothing but calling the default handler.
Now PCM core accepts NULL as the default ioctl ops, so let's drop
altogether.
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
snd_cx18_pcm_ioctl() does nothing but calling the default handler.
Now PCM core accepts NULL as the default ioctl ops, so let's drop
altogether.
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
snd_cobalt_pcm_ioctl() does nothing but calling the default handler.
Now PCM core accepts NULL as the default ioctl ops, so let's drop
altogether.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With the recent change in ALSA PCM core, the whole open-coded vmalloc
buffer handling in this driver can be dropped by replacing with the
managed buffer allocation.
Also, snd_tm6000_capture_free() is dropped since the check of
stream_started flag makes no sense; hw_free callback is guaranteed to
be called after the stream gets stopped.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With the recent change in ALSA PCM core, the whole open-coded vmalloc
buffer handling in this driver can be dropped by replacing with the
managed buffer allocation.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With the recent change in ALSA PCM core, the whole open-coded vmalloc
buffer handling in this driver can be dropped by replacing with the
managed buffer allocation.
Also, snd_em28xx_hw_capture_free() is dropped since the check of
stream_started flag makes no sense; hw_free callback is guaranteed to
be called after the stream gets stopped.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With the recent change in ALSA PCM core, the whole open-coded vmalloc
buffer handling in this driver can be dropped by replacing with the
managed buffer allocation.
Also, snd_cx231xx_hw_capture_free() is dropped since the check of
stream_started flag makes no sense; hw_free callback is guaranteed to
be called after the stream gets stopped.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With the recent change in ALSA PCM core, the whole open-coded vmalloc
buffer handling in this driver can be dropped by replacing with the
managed buffer allocation.
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With the recent change in ALSA PCM core, the whole open-coded vmalloc
buffer handling in this driver can be dropped by replacing with the
managed buffer allocation.
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With the recent change in ALSA PCM core, the whole open-coded vmalloc
buffer handling in this driver can be dropped by replacing with the
managed buffer allocation.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Clean up the driver with the new managed buffer allocation API.
The hw_params and hw_free callbacks became superfluous and dropped.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Clean up the driver with the new managed buffer allocation API.
The hw_params and hw_free callbacks became superfluous and dropped.
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Clean up the driver with the new managed buffer allocation API.
The hw_params and hw_free callbacks became superfluous and dropped.
Cc: Bluecherry Maintainers <maintainers@bluecherrydvr.com>
Cc: Anton Sviridenko <anton@corp.bluecherry.net>
Cc: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
Cc: Ismael Luceno <ismael@iodev.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
go7007_snd_init() misses a snd_card_free() in an error path.
Add the missed call to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In csc_set_coeff() we were previously checking if the format type was
V4L2_BUF_TYPE_VIDEO_OUTPUT or V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE as a
mean to figure out if the format was multiplanar or not. This was not
entirely accurate as the format type could also be a CAPTURE type
instead.
Fix this by removing the 'switch' construct and replacing them with
"if (V4L2_TYPE_IS_MULTIPLANAR(type))" instead.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
That URL is no longer valid, so either remove references to it or
replace it with linuxtv.org.
Rather than updating the URL I've just dropped the cx18.rst driver
documentation since it was really out of date.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: awalls@md.metrocast.net
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This driver forgets to kill tasklet when probe fails and remove.
Add the calls to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Support to emulate touch devices in vivid driver.
It generates touch patterns simulating single tap, double tap, triple
tap, move from left to right, zoom in, zoom out, palm press simulating
large area being pressed on screen, and simulating 16 different
simultaneous touch points.The values generated are based on
behavior of the rmi_f54 driver.
Signed-off-by: Vandana BN <bnvandana@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
