This is another case where we really can't reconstruct a acquire ctx
in any useful fashion because all the callers are legacy drivers. So
like drm_plane_force_disable simply restrict it to non-atomic drivers
so that it's clear we're ok with passing a NULL ctx.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-17-daniel.vetter@ffwll.ch
No need to grab both plane and crtc locks at the same time, we can do
them one after the other. If userspace races it'll get what it
deserves either way.
This removes another user of drm_modeset_lock_crtc. There's only one
left.
v2: Make sure all access to primary->state is properly protected
(Harry).
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328070145.21520-1-daniel.vetter@ffwll.ch
Again just going through the motions, no functional changes in here.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>t
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-12-daniel.vetter@ffwll.ch
Nouveau had a few direct calls to ->disable_plane, I replaced those
with drm_plane_force_disable. Same story for shmob.
Otherwise no code changes.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-5-daniel.vetter@ffwll.ch
Just rolling it out, no code change here.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-3-daniel.vetter@ffwll.ch
This is just prep work to get an acquire ctx into every place where we
call ->update_plane or ->disable_plane.
v2: Keep the hidden acquire_ctx pointers valid while transitioning.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-2-daniel.vetter@ffwll.ch
Yes the help text is unhelpful, but atomic drivers should never use
this. Just grab the lock without context or anything.
Also an aside: Checking ->active like this doesn't protect against
nonblocking commits, this is rather bogus.
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-8-daniel.vetter@ffwll.ch
The trouble here is that it does multiple atomic commits under one
drm_modeset_lock_all, which breaks the behind-the-scenes acquire
context magic that function pulls off. It's much better to have one
overall atomic commit. That we still have multiple atomic commits
prevents us from adding some pretty useful debug checks to the atomic
machinery.
Hence it is really a bad idea to call the legacy
drm_crtc_force_disable_all() function. There's 2 atomic drivers using
this still, nouveau and tinydrm. To fix this, introduce a new
drm_atomic_helper_shutdown() by extracting the code from i915.
While at it improve kernel-doc and catch future offenders by
sprinkling a WARN_ON into the legacy function. We should probably move
those into the legacy modeset helpers, too ...
v2: Make it compile on arm drivers too (Noralf).
v3: Correct kerneldoc to point at _disable_all().
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321164149.31531-1-daniel.vetter@ffwll.ch
drm_driver.fops can't be shared since the owner then becomes tinydrm.ko.
Move the fops declaration to the driver.
v2: Use DEFINE_DRM_GEM_CMA_FOPS
Reported-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170326142529.16938-1-noralf@tronnes.org
Currently, the irq handler that monitors changes for HPD and RX_SENSE
relies on the status of the bridge for updating the status of the HPD.
The update is done only when the bridge is enabled.
However, on Rockchip platforms we have found use cases where it could be
a problem. When HDMI is being used, turning off/on the screen or
unplugging/re-plugging the cable, the following simplified code path
will happen:
- dw_hdmi_irq() will be triggered by an HPD event, as the bridge is on
hdmi->disabled is false, then the handler will update the rxsense flag
accordingly.
- dw_hdmi_update_power() will be invoked with the mode
DRM_FORCE_UNSPECIFIED and rxsense == 1, so dw_hdmi_poweroff() will be
called and the PHY will be desactivated (its pixel clocks and TMDS)
[...]
- dw_hdmi_bridge_disable() will be invoked, the bridge will be marked as
disabled.
- dw_hdmi_irq() will be triggered by an HPD event, as the bridge is
currently disabled the HPD status won't be updated, so hdmi->rxsense
won't be changed. Even if the data part of the PHY is disabled, this
information coming from the HDMI Transmitter is correct and should be
saved.
[...]
- dw_hdmi_bridge_enable() will be invoked, the bridge will be marked as
enabled.
- dw_hdmi_update_power() will be called. When hdmi->force is equal to
DRM_FORCE_UNSPECIFIED the function will rely on hdmi->rxsense. If this
field has not been updated by the irq handler, it will be false and
DRM_FORCE_ON won't be put to hdmi->force.
Consequently, most of the time dw_hdmi_poweron() won't be called in this
use case, TMDS won't be re-enabled the PHY won't be re-initialized,
resulting in a "Signal not found".
This commit fixes the issue by removing the check for "!hdmi->disabled".
As already explained, even if the PHY is partially disabled, information
coming from HDMI Transmitter about HPD should be saved for a later use.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/143602/
To match the drm_ioctl.c we already have.
v2: Remove spurious space (Ville).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Again this is an internal helper, not the official way to lock a crtc.
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-9-daniel.vetter@ffwll.ch
For the RK3399, the grf_switch_reg name should be RK3399_GRF_SOC_CON20,
not RK3399_GRF_SOC_CON19.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1490147691-4489-5-git-send-email-zyw@rock-chips.com
For RK3399, the phy_cfg_clk is a required clock, if phy_cfg_clk is
disabled, MIPI phy can not work. Let's return a error if there is no
phy_cfg_clk in dts property, when the pdata match RK3399.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1490147691-4489-2-git-send-email-zyw@rock-chips.com
Currently we are adding all components from the dts, if one of their
drivers been disabled, we would not be able to bring up others.
Refactor component match logic, follow exynos drm.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1490152880-21855-1-git-send-email-jeffy.chen@rock-chips.com
I've decided to not document drm_debugfs_remove_files, it's on the way
out.
The biggest part is a huge todo.rst entry with what all should be
improved.
v2: Nits from Gabriel.
Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322205401.24897-1-daniel.vetter@ffwll.ch
This was missed in Tomeu's patch. Also remove the kerneldoc for the
internal function, we don't document that in general.
While at it word-smith the docs slightly for more clarity.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322083617.13361-4-daniel.vetter@ffwll.ch
Resync with drm-next, I have a patch which currently can't be applied
because drm-misc-next lacked the latest drm/i915 code.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYzznuAAoJEHm+PkMAQRiGAzMIAJDBo5otTMMLhg8eKj8Cnab4
2NyaoWDN6mtU427rzEKEfZlTtp3gIBVdFex5x442weIdw6BgRQW0dvF/uwEn08yI
9Wx7VJmIUyH9M8VmhDtkUTFrhwUGr29qb3JhENMd7tv/CiJaehGRHCT3xqo5BDdu
xiyPcwSkwP/NH24TS91G87gV6r0I0oKLSAxu+KifEFESrb8gaZaduslzpEj3m/Ds
o9EPpfzaiGAdW5EdNfPtviYbBk7ZOXwtxdMV+zlvsLcaqtYnFEsJZd2WyZL0zGML
VXBVxaYtlyTeA7Mt8YYUL+rDHELSOtCeN5zLfxUvYt+Yc0Y6LFBLDOE5h8b3eCw=
=uKUo
-----END PGP SIGNATURE-----
BackMerge tag 'v4.11-rc3' into drm-next
Linux 4.11-rc3 as requested by Daniel
drm-misc for 4.12, 2nd attempt this week:
- topic branch from Jon Corbet for the new graph kerneldoc support
- lots of graphs for kms/atomic things using the above
- some vblank query tuning from Chris
- gem/cma_fops macros
- moar docs
Driver stuff:
- vc4 hdmi audio, yay (Eric)
- dw-hdmi polish from a bunch of people
- some rockchip dp updates that didn't make last week (Chris Zhong)
- misc bridge&driver updates
* tag 'drm-misc-next-2017-03-21' of git://anongit.freedesktop.org/git/drm-misc: (37 commits)
drm/edid: detect SCDC support in HF-VSDB
drm/edid: detect SCDC support in HF-VSDB
drm/edid: check for HF-VSDB block
drm: Add SCDC helpers
drm: bridge: dw-hdmi: add HDMI vendor specific infoframe config
drm/bridge: dw_hdmi: support i2c extended read mode
drm/msm: add stubs for msm_{perf,rd}_debugfs_cleanup
drm: bochs: Don't remove uninitialized fbdev framebuffer
drm: vc4: remove redundant check of plane being non-null
drm/vc4: use platform_register_drivers
dma-fence: add dma_fence_match_context helper
drm/vc4: Add HDMI audio support
dt-bindings: Document the dmas and dma-names properties for VC4 HDMI
drm/atmel-hlcdc: Fix suspend/resume implementation
drm: Skip the waitqueue setup for vblank queries
drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)
drm/doc: atomic overview, with graph
drm/doc: diagram for mode objects and properties
drm/doc: Consistent kerneldoc include order
drm/doc: Add KMS overview graphs
...
More in i915 for 4.12:
- designware i2c fixes from Hans de Goede, in a topic branch shared
with other subsystems (maybe, they didn't confirm, but requested the
pull)
- drop drm_panel usage from the intel dsi vbt panel (Jani)
- vblank evasion improvements and tracing (Maarten and Ville)
- clarify spinlock irq semantics again a bit (Tvrtko)
- new ->pwrite backend hook (right now just for shmem pageche writes),
from Chris
- more planar/ccs work from Ville
- hotplug safe connector iterators everywhere
- userptr fixes (Chris)
- selftests for cache coloring eviction (Matthew Auld)
- extend debugfs drop_caches interface for shrinker testing (Chris)
- baytrail "the rps kills the machine" fix (Chris)
- use new atomic state iterators, a lot (Maarten)
- refactor guc/huc code some (Arkadiusz Hiler)
- tighten breadcrumbs rbtree a bit (Chris)
- improve wrap-around and time handling in rps residency counters
(Mika)
- split reset-in-progress in two flags, backoff and handoff (Chris)
- other misc reset improvements from a few people
- bunch of vgpu interaction fixes with recent code changes
- misc stuff all over, as usual
* tag 'drm-intel-next-2017-03-20' of git://anongit.freedesktop.org/git/drm-intel: (144 commits)
drm/i915: Update DRIVER_DATE to 20170320
drm/i915: Initialise i915_gem_object_create_from_data() directly
drm/i915: Correct error handling for i915_gem_object_create_from_data()
drm/i915: i915_gem_object_create_from_data() doesn't require struct_mutex
drm/i915: Retire an active batch pool object rather than allocate new
drm/i915: Add i810/i815 pci-ids for completeness
drm/i915: Skip execlists_dequeue() early if the list is empty
drm/i915: Stop using obj->obj_exec_link outside of execbuf
drm/i915: Squelch WARN for VLV_COUNTER_CONTROL
drm/i915/glk: Enable pooled EUs for Geminilake
drm/i915: Remove superfluous i915_add_request_no_flush() helper
drm/i915/vgpu: Neuter forcewakes for VGPU more thoroughly
drm/i915: Fix vGPU balloon for ggtt guard page
drm/i915: Avoid use-after-free of ctx in request tracepoints
drm/i915: Assert that the context pin_counts do not overflow
drm/i915: Wait for reset to complete before returning from debugfs/i915_wedged
drm/i915: Restore engine->submit_request before unwedging
drm/i915: Move engine->submit_request selection to a vfunc
drm/i915: Split I915_RESET_IN_PROGRESS into two flags
drm/i915: make context status notifier head be per engine
...
drm_dp_mst_allocate_vcpi() apart from setting up the vcpi structure,
also finds if there are enough slots available. This check is a duplicate
of that implemented in drm_dp_mst_find_vcpi_slots(). Let's move this check
out and reuse the existing drm_dp_mst_find_vcpi_slots() function to check
if there are enough vcpi slots before allocating them.
This brings the check to one place. Additionally drivers that will use MST
state tracking for atomic modesets can use the atomic version of
find_vcpi_slots() and reuse drm_dp_mst_allocate_vcpi()
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-4-git-send-email-dhinakaran.pandiyan@intel.com
The avail_slots member in the MST topology manager is never updated to
reflect the available vcpi slots. The check is effectively against
total slots, 63. So, let's make that check obvious and remove
avail_slots. While at it, make debug messages more descriptive.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Harry Wentland <Harry.wentland@amd.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-3-git-send-email-dhinakaran.pandiyan@intel.com
The total vcpi time slots is always 63 and does not depend on the link BW,
remove total_slots from MST topology manager struct. The next change is to
remove total_pbn which is hardcoded to 2560. The total PBN that the
topology manager allocates from depends on the link rate and is not a
constant. So, fix this by removing the total_pbn member itself.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Harry Wentland <Harry.wentland@amd.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-2-git-send-email-dhinakaran.pandiyan@intel.com
Allow drivers to return a custom drm_format_info structure for special
fb layouts. We'll use this for the compression control surface in i915.
v2: Fix drm_get_format_info() kernel doc (Laurent)
Don't pass 'dev' to the new hook (Laurent)
v3: s/compresssion/compression/ (Ben)
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321181218.10042-4-ville.syrjala@linux.intel.com
Allow framebuffers dimesions to be misaligned w.r.t. the subsampling
factors. No real reason the core should have to enforce this, and
it definitely starts to cause us issues with the i915 CCS support.
So let's just lift the restriction.
Let's start to round up when computing the color plane dimesions
so that we'll not end up with too low an estimate for the memory
requirements and whatnot.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321181218.10042-3-ville.syrjala@linux.intel.com
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
framebuffer_check() has some hand rolled code to compute the color plane
dimensions based on the subsampled information. Let's share the code
between framebuffer_check() and drm_framebuffer_plane_{width,height}().
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321181218.10042-2-ville.syrjala@linux.intel.com
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
This structure will be used to save and indicate if sink
supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
in scdc structure
- If SCDC is present, checks if sink is capable of generating
SCDC read request, and marks it in scdc structure.
V2: Addressed review comments
Thierry:
- Fix typos in commit message and make abbreviation consistent
across the commit message.
- Change structure object name from hdmi_info -> hdmi
- Fix typos and abbreviations in description of structure drm_hdmi_info
end the description with a full stop.
- Create a structure drm_scdc, and keep all information related to SCDC
register set (supported, read request supported) etc in it.
Ville:
- Change rr -> read_request
- Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
of HF-VSDB parsing can be kept in same function, in incremental
patches.
V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Addressed review comments from Ville
- Add clock rate calculations for 1/10 and 1/40 ratios
- Remove leftovers from old patchset
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com
This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
This structure will be used to save and indicate if sink
supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
in scdc structure
- If SCDC is present, checks if sink is capable of generating
SCDC read request, and marks it in scdc structure.
V2: Addressed review comments
Thierry:
- Fix typos in commit message and make abbreviation consistent
across the commit message.
- Change structure object name from hdmi_info -> hdmi
- Fix typos and abbreviations in description of structure drm_hdmi_info
end the description with a full stop.
- Create a structure drm_scdc, and keep all information related to SCDC
register set (supported, read request supported) etc in it.
Ville:
- Change rr -> read_request
- Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
of HF-VSDB parsing can be kept in same function, in incremental
patches.
V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Rebase.
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-4-git-send-email-shashank.sharma@intel.com
This patch implements a small function that finds if a
given CEA db is hdmi-forum vendor specific data block
or not.
V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Rebase
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-3-git-send-email-shashank.sharma@intel.com
SCDC is a mechanism defined in the HDMI 2.0 specification that allows
the source and sink devices to communicate.
This commit introduces helpers to access the SCDC and provides the
symbolic names for the various registers defined in the specification.
V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Addressed review comments from Ville
- Handle the I2c return values in a better way (dp_dual_mode)
- Make the macros for SCDC Major/Minor more readable, by adding
a 'GET' in the macro names
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-2-git-send-email-shashank.sharma@intel.com
"I2C Master Interface Extended Read Mode" implements a segment
pointer-based read operation using the Special Register configuration.
This patch fix https://patchwork.kernel.org/patch/7098101/ mentioned
"The current implementation does not support "I2C Master Interface
Extended Read Mode" to read data addressed by non-zero segment
pointer, this means that if EDID has more than 1 extension blocks,
EDID reading operation won't succeed"
With this patch, dw-hdmi can read EDID data with 1/2/4 blocks.
Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1489978651-16647-1-git-send-email-nickey.yang@rock-chips.com
We now call those two functions even when they are not defined
or declared anywhere because DEBUG_FS is disabled:
drivers/gpu/drm/msm/msm_drv.c: In function 'msm_drm_uninit':
drivers/gpu/drm/msm/msm_drv.c:244:2: error: implicit declaration of function 'msm_perf_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration]
drivers/gpu/drm/msm/msm_drv.c:245:2: error: implicit declaration of function 'msm_rd_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration]
This adds empty stub implementations for that case.
Fixes: 85eac4700e ("drm/msm: Remove msm_debugfs_cleanup()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320093936.1255573-1-arnd@arndb.de
- Initial support for the Prefetch Resolve Engine/Gasket on i.MX6QP,
improving linear scanout buffer memory bandwidth utilization. This
will in the future grow reordering support and allow direct scanout
of Vivante tiled renderbuffers from the GPU.
- Deferred plane disabling gets rid of some busy waiting in the atomic
plane disable and crtc disable paths that lead to wait_for_vblank
timeouts.
- Add support for RGBA formats with a separate alpha plane, that can
reduce memory bandwidth utilization for mostly transparent overlay
planes by skipping color reads for completely transparent regions.
- Allow moving an active overlay plane without enforcing a modeset.
- Add 8-bit and 16-bit bayer formats to ipu_cpmem_set_image.
- Set the base address in ipu_cpmem_set_image even for invalid formats
to increase robustness against errors.
- Use drm_plane_helper_check_state in plane atomic_check.
- Some cleanup.
-----BEGIN PGP SIGNATURE-----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=dyZf
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2017-03-17' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm PRE/PRG support, deferred plane disabling, separate alpha support
- Initial support for the Prefetch Resolve Engine/Gasket on i.MX6QP,
improving linear scanout buffer memory bandwidth utilization. This
will in the future grow reordering support and allow direct scanout
of Vivante tiled renderbuffers from the GPU.
- Deferred plane disabling gets rid of some busy waiting in the atomic
plane disable and crtc disable paths that lead to wait_for_vblank
timeouts.
- Add support for RGBA formats with a separate alpha plane, that can
reduce memory bandwidth utilization for mostly transparent overlay
planes by skipping color reads for completely transparent regions.
- Allow moving an active overlay plane without enforcing a modeset.
- Add 8-bit and 16-bit bayer formats to ipu_cpmem_set_image.
- Set the base address in ipu_cpmem_set_image even for invalid formats
to increase robustness against errors.
- Use drm_plane_helper_check_state in plane atomic_check.
- Some cleanup.
* tag 'imx-drm-next-2017-03-17' of git://git.pengutronix.de/git/pza/linux: (22 commits)
drm/imx: Remove unneeded definition for structure imx_drm_component
drm/imx: use PRG/PRE when possible
drm/imx: enable/disable PRG on CRTC enable/disable
gpu: ipu-v3: only set non-zero AXI ID for IC when PRG is absent
gpu: ipu-v3: hook up PRG unit
gpu: ipu-v3: document valid IPUv3 compatibles and extend for i.MX6 QuadPlus
gpu: ipu-v3: add driver for Prefetch Resolve Gasket
gpu: ipu-v3: add DT binding for the Prefetch Resolve Gasket
gpu: ipu-v3: add driver for Prefetch Resolve Engine
gpu: ipu-v3: add DT binding for the Prefetch Resolve Engine
drm/imx: ipuv3-plane: add support for separate alpha planes
drm/imx: extend drm_plane_state_to_eba for separate channel support
gpu: ipu-v3: add support for separate alpha channels
drm: add RGB formats with separate alpha plane
drm/imx: add deferred plane disabling
drm/imx: don't wait for vblank and stop calling cleanup_planes in commit_tail
gpu: ipu-v3: add unsynchronised DP channel disabling
gpu: ipu-v3: remove IRQ dance on DC channel disable
gpu: ipu-cpmem: add bayer formats to ipu_cpmem_set_image
gpu: ipu-cpmem: set image base address even for incorrect formats
...
The pointer plane is always null on the error path at label 'fail'
hence the check if it is non-null is redundant. We can therefore
remove the check and the destruction of plane as well as the fail
error path and instead just return an -ENOMEM ERR_PTR.
Detected by CoverityScan, CID#1339532 ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316185418.32765-1-colin.king@canonical.com
