1
0
Fork 0
Commit Graph

1620 Commits (d6bbafa183793537d8dca4d4c2e448805e59448a)

Author SHA1 Message Date
Mathias Nyman 8117bd5315 gpio-lynxpoint: enable input sensing in resume
It appears that input sensing bit might be reset during
suspend/resume. Set input sensing again for all requested gpios
in resume

Tested-by: Jerome Blin <jerome.blin@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-21 07:44:57 -05:00
Julia Lawall 8a69155040 gpio: delete unneeded test before of_node_put
Of_node_put supports NULL as its argument, so the initial test is not
necessary.

Suggested by Uwe Kleine-König.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
@@

-if (e)
   of_node_put(e);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17 09:12:35 -05:00
Lars-Peter Clausen 6dd8595083 gpio: zynq: Fix IRQ handlers
The Zynq GPIO interrupt handling code as two main issues:
1) It does not support IRQF_ONESHOT interrupt since it uses handle_simple_irq()
for the interrupt handler. handle_simple_irq() does not do masking and unmasking
of the IRQ that is required for this chip to be able to support IRQF_ONESHOT
IRQs, causing the CPU to lock up in a interrupt storm if such a interrupt is
requested.
2) Interrupts are acked after the primary interrupt handlers for all asserted
interrupts in a bank have been called. For edge triggered interrupt this is to
late and may cause a interrupt to be missed. For level triggered oneshot
interrupts this is to early and causes the interrupt handler to run twice per
interrupt.

This patch addresses the issue by updating the driver to use the correct IRQ
chip handler functions that are appropriate for this kind of IRQ controller.

The following diagram gives an overview of how the interrupt detection circuit
works, it is not necessarily a accurate depiction of the real hardware though.

     INT_POL/INT_ON_ANY
           |
           | +---+                       INT_STATUS
           `-|   |                            |
             | E |-.                          |
         ,---|   |  \     |\          +----+  |  +---+
         |   +---+   `----| | ,-------|S   | ,*--|   |
GPIO_IN -*                | |-        |   Q|-    | & |-- IRQ_OUT
         |   +---+  ,-----| |       ,-|R   |   ,o|   |
         `---|   | /      |/       |  +----+  |  +---+
             | = |-        |       |          |
           ,-|   |    INT_TYPE    ACK     INT_MASK
           | +---+
           |
        INT_POL

GPIO_IN is the raw signal level connected to the hardware pin. This signal is
routed to a edge detector and to a level detector. The edge detector can be
configured to either detect a rising or falling edge or both edges. The level
detector can detect either a level high or level low event. Depending on the
setting of the INT_TYPE register either the edge or level event will be
propagated to the INT_STATUS register. As long as a interrupt condition is
detected the INT_STATUS register will be set to 1. It can be cleared to 0 if
(and only if) the interrupt condition is no longer detected and software
acknowledges the interrupt by writing a 1 to the address of the INT_STATUS
register. There is also the INT_MASK register which can be used to disable the
propagation of the INT_STATUS signal to the upstream IRQ controller. What is
important to note is that the interrupt detection logic itself can not be
disabled, only the propagation of the INT_STATUS register can be delayed. This
means that for level type interrupts the interrupt must only be acknowledged
after the interrupt source has been cleared otherwise it will stay asserted and
the interrupt handler will be run a second time. For IRQF_ONESHOT interrupts
this means that the IRQ must only be acknowledged after the threaded interrupt
has finished running. If a second interrupt comes in between handling the first
interrupt and acknowledging it the external interrupt will be asserted, which
means trying to acknowledge the first interrupt will not clear the INT_STATUS
register and the interrupt handler will be run a second time when the IRQ is
unmasked, so no interrupts will be lost. The handle_fasteoi_irq() handler in
combination with the IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED flags will
have the desired behavior. For edge triggered interrupts a slightly different
strategy is necessary. For edge triggered interrupts the interrupt condition is
only true when the edge itself is detected, this means this is the only time the
INT_STATUS register is set, acknowledging the interrupt any time after that will
clear the INT_STATUS register until the next interrupt happens. This means in
order to not loose any interrupts the interrupt needs to be acknowledged before
running the interrupt handler. If a second interrupt occurs after the first
interrupt handler has finished but before the interrupt is unmasked the
INT_STATUS register will be re-asserted and the interrupt handler runs a second
time once the interrupt is unmasked. This means with this flow handling strategy
no interrupts are lost for edge triggered interrupts. The handle_level_irq()
handler will have the desired behavior. (Note: The handle_edge_irq() only needs
to be used for edge triggered interrupts where the controller stops detecting
the interrupt event when the interrupt is masked, for this controller the
detection logic still works, while only the propagation is delayed when the
interrupt is masked.)

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17 09:12:35 -05:00
Julia Lawall 0f05a3ae45 gpiolib: devres: use correct structure type name in sizeof
Correct typo in the name of the type given to sizeof.  Because it is the
size of a pointer that is wanted, the typo has no impact on compilation or
execution.

This problem was found using Coccinelle (http://coccinelle.lip6.fr/).  The
semantic patch used can be found in message 0 of this patch series.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17 09:12:35 -05:00
Linus Torvalds 06b49ea43c This is the bulk of GPIO changes for the v3.17 development
cycle, and this time we got a lot of action going on and
 it will continue:
 
 - The core GPIO library implementation has been split up in
   three different files:
   - gpiolib.c for the latest and greatest and shiny GPIO
     library code using GPIO descriptors only
   - gpiolib-legacy.c for the old integer number space API
     that we are phasing out gradually
   - gpiolib-sysfs.c for the sysfs interface that we are
     not entirely happy with, but has to live on for
     ABI compatibility
 
 - Add a flags argument to *gpiod_get* functions, with some
   backward-compatibility macros to ease transitions. We
   should have had the flags there from the beginning it
   seems, now we need to clean up the mess. There is a plan
   on how to move forward here devised by Alexandre Courbot
   and Mark Brown.
 
 - Split off a special <linux/gpio/machine.h> header for the
   board gpio table registration, as per example from the
   regulator subsystem.
 
 - Start to kill off the return value from gpiochip_remove()
   by removing the __must_check attribute and removing all
   checks inside the drivers/gpio directory. The rationale
   is: well what were we supposed to do if there is an error
   code? Not much: print an error message. And gpiolib already
   does that. So make this function return void eventually.
 
 - Some cleanups of hairy gpiolib code, make some functions
   not to be used outside the library private and make sure
   they are not exported, remove gpiod_lock/unlock_as_irq()
   as the existing function is for driver-internal use and
   fine as it is, delete gpio_ensure_requested() as it is
   not meaningful anymore.
 
 - Support the GPIOF_ACTIVE_LOW flag from gpio_request_one()
   function calls, which is logical since this is already
   supported when referencing GPIOs from e.g. device trees.
 
 - Switch STMPE, intel-mid, lynxpoint and ACPI (!) to use
   the gpiolib irqchip helpers cutting down on GPIO irqchip
   boilerplate a bit more.
 
 - New driver for the Zynq GPIO block.
 
 - The usual incremental improvements around a bunch of
   drivers.
 
 - Janitorial syntactic and semantic cleanups by Jingoo Han,
   and Rickard Strandqvist especially.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT5Ji9AAoJEEEQszewGV1zch8QAKp67+8ScxRBf/7RCSV6U/dy
 i7kt+nP4au/TScwtjbX264DM8hroW7BzN+GqF10NEFeGkYDR+42lMav9PrNjtKtk
 ojQPWdoGWzwwL0wa4j9rsuG/pRnbAEgDWPb+EkFdHQsLl6h71fyVoLOK+gKwJFyn
 aPYGXyNbT1FN38oj1rarENiOUxM7VMXvcJFfvDYFdDDhCS4PLYPOMw0lrsGtsHMZ
 epDa4z3yt4zHgYiUIT578nQ7EkIbGN3goywk3NQ+9WDQG+sLFHh4BdqcRKg6b9VM
 I64+47uNQxkyvWCvcLma5ziqvtNQk113986g+cv5YeTh18Ajyio1kxEIZM181eBk
 ITUPGrAorWHPLGNbe3psLmtK3+/BwmWIurPmHpckuW8d2JWWSVe0oepkUuqDwu/w
 lUB5KtM0joFOr5k61fj5tCKxH344jc1zvHJ/N+bVYilbOMvunWzuMJlc4hADIGC2
 1uxUAcPbYUAphGaxhdMBca9ellm0lWG19Gj5TtdGbRtNgp6R2qrwI66DDzk+1kLR
 8Szx6KHQdEHFTlCLKSIAMv33p1ClfmNikhdicT3urwR8PeXmmTR1pD7kGmVTDDZa
 gXSU5EilgGpak+77j/GZ2Ivp0Qt5M97UwWlZ7zTp++T1ZY+wwTHJI/09qcoWYjdz
 IpZRIqrQchalbscpn3LY
 =e+d6
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO update from Linus Walleij:
 "This is the bulk of GPIO changes for the v3.17 development cycle, and
  this time we got a lot of action going on and it will continue:

   - The core GPIO library implementation has been split up in three
     different files:
     - gpiolib.c for the latest and greatest and shiny GPIO library code
       using GPIO descriptors only
     - gpiolib-legacy.c for the old integer number space API that we are
       phasing out gradually
     - gpiolib-sysfs.c for the sysfs interface that we are not entirely
       happy with, but has to live on for ABI compatibility

   - Add a flags argument to *gpiod_get* functions, with some
     backward-compatibility macros to ease transitions.  We should have
     had the flags there from the beginning it seems, now we need to
     clean up the mess.  There is a plan on how to move forward here
     devised by Alexandre Courbot and Mark Brown

   - Split off a special <linux/gpio/machine.h> header for the board
     gpio table registration, as per example from the regulator
     subsystem

   - Start to kill off the return value from gpiochip_remove() by
     removing the __must_check attribute and removing all checks inside
     the drivers/gpio directory.  The rationale is: well what were we
     supposed to do if there is an error code? Not much: print an error
     message.  And gpiolib already does that.  So make this function
     return void eventually

   - Some cleanups of hairy gpiolib code, make some functions not to be
     used outside the library private and make sure they are not
     exported, remove gpiod_lock/unlock_as_irq() as the existing
     function is for driver-internal use and fine as it is, delete
     gpio_ensure_requested() as it is not meaningful anymore

   - Support the GPIOF_ACTIVE_LOW flag from gpio_request_one() function
     calls, which is logical since this is already supported when
     referencing GPIOs from e.g. device trees

   - Switch STMPE, intel-mid, lynxpoint and ACPI (!) to use the gpiolib
     irqchip helpers cutting down on GPIO irqchip boilerplate a bit more

   - New driver for the Zynq GPIO block

   - The usual incremental improvements around a bunch of drivers

   - Janitorial syntactic and semantic cleanups by Jingoo Han, and
     Rickard Strandqvist especially"

* tag 'gpio-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (37 commits)
  MAINTAINERS: update GPIO include files
  gpio: add missing includes in machine.h
  gpio: add flags argument to gpiod_get*() functions
  MAINTAINERS: Update Samsung pin control entry
  gpio / ACPI: Move event handling registration to gpiolib irqchip helpers
  gpio: lynxpoint: Convert to use gpiolib irqchip
  gpio: split gpiod board registration into machine header
  gpio: remove gpio_ensure_requested()
  gpio: remove useless check in gpiolib_sysfs_init()
  gpiolib: Export gpiochip_request_own_desc and gpiochip_free_own_desc
  gpio: move gpio_ensure_requested() into legacy C file
  gpio: remove gpiod_lock/unlock_as_irq()
  gpio: make gpiochip_get_desc() gpiolib-private
  gpio: simplify gpiochip_export()
  gpio: remove export of private of_get_named_gpio_flags()
  gpio: Add support for GPIOF_ACTIVE_LOW to gpio_request_one functions
  gpio: zynq: Clear pending interrupt when enabling a IRQ
  gpio: drop retval check enforcing from gpiochip_remove()
  gpio: remove all usage of gpio_remove retval in driver/gpio
  devicetree: Add Zynq GPIO devicetree bindings documentation
  ...
2014-08-08 18:00:35 -07:00
Linus Torvalds b3345d7c57 ARM: SoC platform changes for 3.17
This is the bulk of new SoC enablement and other platform changes for 3.17:
 
 * Samsung S5PV210 has been converted to DT and multiplatform
 * Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms
 * Kirkwood, one of the popular Marvell platforms, is folded into the
   mvebu platform code, removing mach-kirkwood.
 * Hwmod data for TI AM43xx and DRA7 platforms.
 * More additions of Renesas shmobile platform support
 * Removal of plat-samsung contents that can be removed with S5PV210 being
   multiplatform/DT-enabled and the other two old platforms being removed.
 
 New platforms (most with only basic support right now):
 
 * Hisilicon X5HD2 settop box chipset is introduced
 * Mediatek MT6589 (mobile chipset) is introduced
 * Broadcom BCM7xxx settop box chipset is introduced
 
 + as usual a lot other pieces all over the platform code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJT5Dp+AAoJEIwa5zzehBx3w1sP/0vjT/LQOmC8Lv8RW2Ley2ua
 hNu3HcNPnT/N40JEdU9YNv3q0fdxGgcfKj011CNN+49zPSUf1xduk2wfCAk9yV50
 8Sbt1PfDGm1YyUugGN420CzI431pPoM1OGXHZHkAmg+2J286RtUi3NckB//QDbCY
 QhEjhpYc9SXhAOCGwmB4ab7thOljOFSPzKTLMTu3+PNI5zRPRgkDkt6w9XlsAYmB
 nuR271BnzsROkMzAjycwaJ3kdim7wqrMRfk8g96o0jHSF5qf4zsT5uWYYAjTxdUQ
 8Ajz6zjeHe4+95TwTDcq+lCX6rDLZgwkvCAc6hFbeg0uR7Dyek0h6XMEYtwdjaiU
 KNPwOENrYdENNDAGRpkFp1x4h/rY9Plfru0bBo5o6t7aPBvmNeCDzRtlTtLiUNDV
 dG8sfDMtrS/wFHVjylDSQ60Mb+wuW0XneC8D7chY/iRhIllUYi6YXXvt+/tH5C20
 oYDOWqqcDFSb0sJhE5pn4KBV82ZaHx9jMBWGLl+erg2sDX/SK8SxOkLqKYZKtKB5
 0leOGE3Y+C70xt3G9HftLz2sAvvt+C8UPsApPT+dHNE401TWJOYx6LphPkQKjeeK
 P1iwKi+It3l+FaBypgJy/LeMQRy7EyvDBK2I5WoVL/R2qq14EmP1ui3Tthjj0bhq
 tBBof6P9c8OnRVj1Lz3R
 =5TJ6
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This is the bulk of new SoC enablement and other platform changes for
  3.17:

   - Samsung S5PV210 has been converted to DT and multiplatform
   - Clock drivers and bindings for some of the lower-end i.MX 1/2
     platforms
   - Kirkwood, one of the popular Marvell platforms, is folded into the
     mvebu platform code, removing mach-kirkwood
   - Hwmod data for TI AM43xx and DRA7 platforms
   - More additions of Renesas shmobile platform support
   - Removal of plat-samsung contents that can be removed with S5PV210
     being multiplatform/DT-enabled and the other two old platforms
     being removed

  New platforms (most with only basic support right now):

   - Hisilicon X5HD2 settop box chipset is introduced
   - Mediatek MT6589 (mobile chipset) is introduced
   - Broadcom BCM7xxx settop box chipset is introduced

  + as usual a lot other pieces all over the platform code"

* tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits)
  ARM: hisi: remove smp from machine descriptor
  power: reset: move hisilicon reboot code
  ARM: dts: Add hix5hd2-dkb dts file.
  ARM: debug: Rename Hi3716 to HIX5HD2
  ARM: hisi: enable hix5hd2 SoC
  ARM: hisi: add ARCH_HISI
  MAINTAINERS: add entry for Broadcom ARM STB architecture
  ARM: brcmstb: select GISB arbiter and interrupt drivers
  ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
  ARM: configs: enable SMP in bcm_defconfig
  ARM: add SMP support for Broadcom mobile SoCs
  Documentation: arm: misc updates to Marvell EBU SoC status
  Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC
  ARM: mvebu: fix build without platforms selected
  ARM: mvebu: add cpuidle support for Armada 38x
  ARM: mvebu: add cpuidle support for Armada 370
  cpuidle: mvebu: add Armada 38x support
  cpuidle: mvebu: add Armada 370 support
  cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7
  ARM: mvebu: export the SCU address
  ...
2014-08-08 11:14:29 -07:00
Linus Torvalds 44c916d58b ARM: SoC cleanups for 3.17
This merge window brings a good size of cleanups on various
 platforms. Among the bigger ones:
 
 * Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have
   lacked active support for quite a while, and after asking around nobody
   showed interest in keeping them around. If needed, they could be
   resurrected in the future but it's more likely that we would prefer
   reintroduction of them as DT and multiplatform-enabled platforms
   instead.
 * OMAP4 controller code register define diet. They defined a lot of registers
   that were never actually used, etc.
 * Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate)
   to drivers/soc so it can be shared with 64-bit code. This also converts them
   over to traditional driver models where possible.
 * Removal of legacy gpio-samsung driver, since the last users have been
   removed (moved to pinctrl)
 
 Plus a bunch of smaller changes for various platforms that sort of
 dissapear in the diffstat for the above. clps711x cleanups, shmobile
 header file refactoring/moves for multiplatform friendliness, some misc
 cleanups, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJT5DYPAAoJEIwa5zzehBx37egQAIiatNiLLqZnfo3rwGADRz/a
 POfPovktj68aPcobyzoyhFtToMqGvi9PpysyFTIQD2HJFG+5BtiIAuqtg0875zDe
 EpBWgsfugrm0YktJWAtUerj60oAmNPbKfaEm1cOOWuM2lb2mV+QkRrwSTAgsqkT7
 927BzMXKKBRPOVLL0RYhoF8EXa0Eg8kCqAHP8fJrzVYkRp+UrZJDnGiUP1XmWJN+
 VXQMu5SEjcPMtqT7+tfX455RfREHJfBcJ1ZN/dPF8HMWDwClQG0lyc6hifh1MxwO
 8DjIZNkfZeKqgDqVyC17re7pc7p8md5HL8WXbrKpK0A9vQ5bRexbPHxcwJ1T/C2Y
 465H+st5XXbuzV1gbMwjK1/ycsH0tCyffckk8Yl/2e1Fs7GgPNbAELtTdl+5vV1Y
 xmDXkyo/9WlRM3LQ23IGKwW7VzN86EfWVuShssfro0fO7xDdb4OOYLdQI+4bCG+h
 ytQYun1vU32OEyNik5RVNQuZaMrv2c93a3bID4owwuPHPmYOPVUQaqnRX/0E51eA
 aHZYbk2GlUOV3Kq5aSS4iyLg1Yj+I9/NeH9U+A4nc+PQ5FlgGToaVSCuYuw4DqbP
 AAG+sqQHbkBMvDPobQz/yd1qZbAb4eLhGy11XK1t5S65rApWI55GwNXnvbyxqt8x
 wpmxJTASGxcfuZZgKXm7
 =gbcE
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This merge window brings a good size of cleanups on various platforms.
  Among the bigger ones:

   - Removal of Samsung s5pc100 and s5p64xx platforms.  Both of these
     have lacked active support for quite a while, and after asking
     around nobody showed interest in keeping them around.  If needed,
     they could be resurrected in the future but it's more likely that
     we would prefer reintroduction of them as DT and
     multiplatform-enabled platforms instead.

   - OMAP4 controller code register define diet.  They defined a lot of
     registers that were never actually used, etc.

   - Move of some of the Tegra platform code (PMC, APBIO, fuse,
     powergate) to drivers/soc so it can be shared with 64-bit code.
     This also converts them over to traditional driver models where
     possible.

   - Removal of legacy gpio-samsung driver, since the last users have
     been removed (moved to pinctrl)

  Plus a bunch of smaller changes for various platforms that sort of
  dissapear in the diffstat for the above.  clps711x cleanups, shmobile
  header file refactoring/moves for multiplatform friendliness, some
  misc cleanups, etc"

* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
  drivers: CCI: Correct use of ! and &
  video: clcd-versatile: Depend on ARM
  video: fix up versatile CLCD helper move
  MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
  MAINTAINERS: Remove Kirkwood
  ARM: tegra: Convert PMC to a driver
  soc/tegra: fuse: Set up in early initcall
  ARM: tegra: Always lock the CPU reset vector
  ARM: tegra: Setup CPU hotplug in a pure initcall
  soc/tegra: Implement runtime check for Tegra SoCs
  soc/tegra: fuse: fix dummy functions
  soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
  soc/tegra: Add efuse and apbmisc bindings
  soc/tegra: Add efuse driver for Tegra
  ARM: tegra: move fuse exports to soc/tegra/fuse.h
  ARM: tegra: export apb dma readl/writel
  ARM: tegra: Use a function to get the chip ID
  ARM: tegra: Sort includes alphabetically
  ARM: tegra: Move includes to include/soc/tegra
  ...
2014-08-08 11:00:26 -07:00
Linus Torvalds 54c72d5987 == Changes to existing drivers ==
- Checkpatch fixes throughout the subsystem
   - Use Regmap to handle IRQs in max77686, extcon-max77693 and mc13xxx-core
   - Use DMA in rtsx_pcr
   - Restrict building on unsupported architectures on timberdale, cs5535
   - SPI hardening in cros_ec_spi
   - More robust error handing in asic3, cros_ec, ab8500-debugfs,
         max77686 and pcf50633-core
   - Reorder PM runtime and regulator handing during shutdown in arizona
   - Enable wakeup in cros_ec_spi
   - Unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld,
         tps65912-spi, wm5110-tables and ab8500-debugfs
   - Add regulator handing into suspend() in sec-core
   - Remove pointless wrapper functions in extcon-max77693 and i2c-cros-ec-tunnel
   - Use cross-architecture friendly data sizes in stmpe-i2c, arizona,
         max77686 and tps65910
   - Device Tree documentation updates throughout
   - Provide power management support in max77686
   - Few OF clean-ups in max77686
   - Use manged resources in tps6105x
 
  == New drivers/supported devices ==
   - Add support for s2mpu02 to sec-core
   - Add support for Allwinner A32 to sun6i-prcm
   - Add support for Maxim 77802 in max77686
   - Add support for DA9063 AD in da9063
   - Add new driver for Intel PMICs (generic) and specifically Crystal Cove
 
  == (Re-)moved drivers ==
   - Move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT40p7AAoJEFGvii+H/HdhTo0P/1GuZyvCAJCeqt2oN1gcloIe
 Hgf5rEo/PVPh3T9vHA7GCbWhgtdxfJI8FxrQYvU7Dw5cEMlmvl5p/ZHNPIProv97
 uI59JO67roLpXZP+aYX8BzXcplYkaR/ah16o/ePtaOCwGrXDz+TtJiHEVVN/8bAG
 PWsdcDNBC8byP7BZ/8zFdu6pX4800eRZ0KgeBH+u4k6UDor7M6LkQrxF1hJhU1Bv
 z14Q2wKQufhbcyEtQWcYc6M8hignD1Ioyd4I8mnEJs0EUiABfGUEk/K/G4Z5Q7Sv
 eRIEPZCd1CEBKD5JQcPXyE1QGdG9GiD15PLmctPA4VY1V+9c5/Hoq0TLoxlAQNWA
 gUr7WSqJ+KT2Nch0WVr/MdP8l0jPYfboWbsd/apj4GK0/9quwJNkGUxx0mCdCXyg
 9ylitwUrmlrd4CEKjybfEuTQB52Jvcdq24fnNYHHn1TGppZH6w7LVvdwSW7UcjF0
 Y48hTImYYnVAlWl5lE5xVQTWD/3hseAcoWTsdSORSWJbkCfAhJUg/Gn5bH/Fkwhs
 /aWYPvkF+m47PoudZ9Z8qB5OTO4uz/Q9uEBBf2/k4Yy95vl2IZdy9VqS5tYG67e7
 LLdAZvG5hjEwDi3OwcwGSdZ/kRB5Hgq/YvpqjItle86CKj0ECdAqL/PfqLISgJq9
 x3zSuWMRLcNoyhc2HnBj
 =2cNI
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD update from Lee Jones:
 "Changes to existing drivers:
   - checkpatch fixes throughout the subsystem
   - use Regmap to handle IRQs in max77686, extcon-max77693 and
     mc13xxx-core
   - use DMA in rtsx_pcr
   - restrict building on unsupported architectures on timberdale,
     cs5535
   - SPI hardening in cros_ec_spi
   - more robust error handing in asic3, cros_ec, ab8500-debugfs,
     max77686 and pcf50633-core
   - reorder PM runtime and regulator handing during shutdown in arizona
   - enable wakeup in cros_ec_spi
   - unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld,
     tps65912-spi, wm5110-tables and ab8500-debugfs
   - add regulator handing into suspend() in sec-core
   - remove pointless wrapper functions in extcon-max77693 and
     i2c-cros-ec-tunnel
   - use cross-architecture friendly data sizes in stmpe-i2c, arizona,
     max77686 and tps65910
   - devicetree documentation updates throughout
   - provide power management support in max77686
   - few OF clean-ups in max77686
   - use manged resources in tps6105x

  New drivers/supported devices:
   - add support for s2mpu02 to sec-core
   - add support for Allwinner A32 to sun6i-prcm
   - add support for Maxim 77802 in max77686
   - add support for DA9063 AD in da9063
   - new driver for Intel PMICs (generic) and specifically Crystal Cove

  (Re-)moved drivers ==
   - move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb"

* tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (101 commits)
  MAINTAINERS: Update MFD repo location
  mfd: omap-usb-host: Fix improper mask use.
  mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested it
  mfd: arizona: Add missing handling for ISRC3 under/overclocked
  mfd: wm5110: Add new interrupt register definitions
  mfd: arizona: Rename thermal shutdown interrupt
  mfd: wm5110: Add in the output done interrupts
  mfd: wm5110: Remove non-existant interrupts
  mfd: tps65912-spi: Remove unused variable
  mfd: htc-i2cpld: Remove unused code
  mfd: da9063: Add support for AD silicon variant
  mfd: arizona: Map MICVDD from extcon device to the Arizona core
  mfd: arizona: Add MICVDD to mapped regulators for wm8997
  mfd: max77686: Ensure device type IDs are architecture agnostic
  mfd: max77686: Add Maxim 77802 PMIC support
  mfd: tps6105x: Use managed resources when allocating memory
  mfd: wm8997-tables: Suppress 'line over 80 chars' warnings
  mfd: kempld-core: Correct a variety of checkpatch warnings
  mfd: ipaq-micro: Fix coding style errors/warnings reported by checkpatch
  mfd: si476x-cmd: Remedy checkpatch style complains
  ...
2014-08-07 17:17:39 -07:00
Alexandre Courbot 39b2bbe3d7 gpio: add flags argument to gpiod_get*() functions
The huge majority of GPIOs have their direction and initial value set
right after being obtained by one of the gpiod_get() functions. The
integer GPIO API had gpio_request_one() that took a convenience flags
parameter allowing to specify an direction and value applied to the
returned GPIO. This feature greatly simplifies client code and ensures
errors are always handled properly.

A similar feature has been requested for the gpiod API. Since setting
the direction of a GPIO is so often the very next action done after
obtaining its descriptor, we prefer to extend the existing functions
instead of introducing new functions that would raise the
number of gpiod getters to 16 (!).

The drawback of this approach is that all gpiod clients need to be
updated. To limit the pain, temporary macros are introduced that allow
gpiod_get*() to be called with or without the extra flags argument. They
will be removed once all consumer code has been updated.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:28:05 +02:00
Mika Westerberg afa82fab5e gpio / ACPI: Move event handling registration to gpiolib irqchip helpers
Since now we have irqchip helpers that the GPIO chip drivers are supposed
to use if possible, we can move the registration of ACPI events to happen
in these helpers. This seems to be more natural place and might encourage
GPIO chip driver writers to take advantage of the irqchip helpers.

We make the functions available to GPIO chip drivers via private gpiolib.h,
just in case generic irqchip helpers are not suitable.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:23:57 +02:00
Mika Westerberg 7f87210eff gpio: lynxpoint: Convert to use gpiolib irqchip
Instead of open-coding irqchip handling in the driver we can take advantage
of the new irqchip helpers provided by the gpiolib core.

While doing this we also make sure that we call gpiochip_irqchip_add()
after the gpiochip itself is registered as required.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:23:56 +02:00
Linus Walleij 0a6d315827 gpio: split gpiod board registration into machine header
As per example from the regulator subsystem: put all defines and
functions related to registering board info for GPIO descriptors
into a separate <linux/gpio/machine.h> header.

Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Alexandre Courbot <gnurou@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-28 12:23:35 +02:00
Arnd Bergmann dffd7e35a5 Merge branch 'cleanup/gpio-header-removal' into next/soc
* cleanup/gpio-header-removal:
  ARM: delete old reference to ARM_GPIOLIB_COMPLEX
  ARM: kill CONFIG_NEED_MACH_GPIO_H
  ARM: mach-s5p: get rid of all <mach/gpio.h> headers
  ARM: s5p: cut the custom ARCH_NR_GPIOS definition

This resolves a massive amount of conflicts between the
mach/gpio.h removal and the s5p platform removal.

Almost all changes are trivial, as both sides remove
stuff.

Conflicts:
	arch/arm/Kconfig
	arch/arm/mach-s5p64x0/common.c
	arch/arm/mach-s5p64x0/dev-audio.c
	arch/arm/mach-s5p64x0/include/mach/gpio-samsung.h
	arch/arm/mach-s5p64x0/mach-smdk6440.c
	arch/arm/mach-s5p64x0/mach-smdk6450.c
	arch/arm/mach-s5p64x0/setup-fb-24bpp.c
	arch/arm/mach-s5p64x0/setup-i2c0.c
	arch/arm/mach-s5p64x0/setup-i2c1.c
	arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
	arch/arm/mach-s5p64x0/setup-spi.c
	arch/arm/mach-s5pc100/dev-audio.c
	arch/arm/mach-s5pc100/include/mach/gpio-samsung.h
	arch/arm/mach-s5pc100/mach-smdkc100.c
	arch/arm/mach-s5pc100/setup-fb-24bpp.c
	arch/arm/mach-s5pc100/setup-i2c0.c
	arch/arm/mach-s5pc100/setup-i2c1.c
	arch/arm/mach-s5pc100/setup-ide.c
	arch/arm/mach-s5pc100/setup-keypad.c
	arch/arm/mach-s5pc100/setup-sdhci-gpio.c
	arch/arm/mach-s5pc100/setup-spi.c
	arch/arm/mach-s5pv210/dev-audio.c
	arch/arm/mach-s5pv210/include/mach/gpio-samsung.h
	arch/arm/mach-s5pv210/mach-aquila.c
	arch/arm/mach-s5pv210/mach-goni.c
	arch/arm/mach-s5pv210/mach-smdkv210.c
	arch/arm/mach-s5pv210/setup-fb-24bpp.c
	arch/arm/mach-s5pv210/setup-fimc.c
	arch/arm/mach-s5pv210/setup-i2c0.c
	arch/arm/mach-s5pv210/setup-i2c1.c
	arch/arm/mach-s5pv210/setup-i2c2.c
	arch/arm/mach-s5pv210/setup-ide.c
	arch/arm/mach-s5pv210/setup-keypad.c
	arch/arm/mach-s5pv210/setup-sdhci-gpio.c
	arch/arm/mach-s5pv210/setup-spi.c
	arch/arm/plat-samsung/Kconfig
	arch/arm/plat-samsung/s5p-irq-eint.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26 18:00:40 +02:00
Arnd Bergmann 96bda115ec Samsung S5PV210 DT support for v3.17
- support common clock framework for s5pv210 clock
 - add generic PHY driver on s5pv210 to support it via DT
 - add dt support for s5pv210-goni, smdkc110, smdkv210 and torbreck boards
 - remove board files from mach-s5pv210 and unused codes
 - enable multiplatform for s5pv210
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJT0ZTrAAoJEA0Cl+kVi2xqaAgP/RZjKZizSPCTTM71wQv4QWjU
 TR3SJMgejnePLzHU6h22P11PBV1KOCec9nko+7M+vQeSCJscoJsudmSiKRceh0tC
 9ATq5eSIw/p3WVjRSFOsj95O1urKdFQPzQ/odwwtw4WRnFerZoY9ihRBKnZxRCJc
 oQdFTDTJeBVlPUxLV1/slS+HWP+I/csYXnAF1Y2tz0GxEX+7iQ6LS7YuCB3kGiG1
 S4mcNyfyhUjpxO4oL0QazCEpsX7UgyNm9MMaW7jGxjc7J7GraiVnFdo3C8yZIeS/
 zAkA6YnOBoFqwCwgJsvo8VBsfqUtMC49GVJYSFiVNe3s9W6awuLfr8GhhHLX7q6t
 dGib2p0DtYbVNGRUHW1PWkwBefdFEGkYmNugcS9/WiqTL2oUr3L11LaAEbzVC2pq
 cBnT7+8lyEoaBmpeMDpmXUti4fyQH4uNxMjoRT4qDI1d/U20+d5pZFZzuQbuZ5xX
 UZnk4vs6YRZAqYgkPh9Wg5A56J+ku21oHBlnbjIxBgrjA9UjP4foCk3rA8iZT1JD
 eH7r033zcOZ1LUOZWO53O4/l5pE8cfU6FweEb9h6ADfrMB8vKTAeDbwipI4n+l0v
 /VxlIV+cRCEuWPCNuYJkOLpqj7L36MFkbkppJy8wyPPPu1UUrpAWpq/Pw60uEW7M
 hkVo/JtpTjqzUEEb7mC1
 =7b91
 -----END PGP SIGNATURE-----

Merge tag 's5pv210-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

Merge "Samsung S5PV210 DT support for v3.17" from Kukjin Kim:

- support common clock framework for s5pv210 clock
- add generic PHY driver on s5pv210 to support it via DT
- add dt support for s5pv210-goni, smdkc110, smdkv210 and torbreck boards
- remove board files from mach-s5pv210 and unused codes
- enable multiplatform for s5pv210

* tag 's5pv210-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  clk: samsung: s5pv210: Remove legacy board support
  ARM: SAMSUNG: Remove remaining legacy code
  gpio: samsung: Remove legacy support of S5PV210
  ARM: S5PV210: Enable multi-platform build support
  cpufreq: s5pv210: Make the driver multiplatform aware
  ARM: S5PV210: Register cpufreq platform device
  ARM: S5PV210: move debug-macro.S into the common space
  ARM: S5PV210: Untie PM support from legacy code
  ARM: S5PV210: Remove support for board files
  ARM: dts: Add Device tree for s5pc110/s5pv210 boards
  ARM: dts: Add Device tree for s5pv210 SoC
  ARM: S5PV210: Add board file for boot using Device Tree
  phy: Add support for S5PV210 to the Exynos USB 2.0 PHY driver
  clk: samsung: Add S5PV210 Audio Subsystem clock driver
  ARM: SAMSUNG: Remove legacy clock code
  serial: samsung: Remove support for legacy clock code
  cpufreq: s3c24xx: Remove some dead code
  ARM: S5PV210: Migrate clock handling to Common Clock Framework
  clk: samsung: Add clock driver for S5PV210 and compatible SoCs

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26 12:01:27 +02:00
Arnd Bergmann f169f4007e Linux 3.16-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTzJFGAAoJEHm+PkMAQRiGNzQH/087gQch5K+A2HKvPzjUXq57
 G82DJHLONMMq8+NY3Vqhp8g2V8zRbXGJEvMJMsyuscO37Vo7ADcrYo8lqY9w5bIl
 h+Zarhkqz0rqRs2SfMMIVzdd2W7MzL+lqj3GplGPxHztw0+qk7PRKILx6eRppGaH
 JaD4NfkD5+1vfve/2d1ze9D5pCiw6PFNzjesKZxScQhNhIyLdRamfSTY4r9XeURo
 CxpwjphEYfvAcgc39mwzEHPHyKSqULu0By6R8FXQpJ9QjVtzcGEiF+cPqGncpZOR
 5ZSyU5e1CpBl9w8o6Lm9ewXmaCSnBU/VFrOwWvZrXfokZedXBOz7KdShU93XFjU=
 =0VJM
 -----END PGP SIGNATURE-----

Merge branches 'samsung/cleanup' and 'samsung/s5p-cleanup-v2', tag 'v3.16-rc6' into next/soc

The following samsung branches are based on these cleanups,
which are already in mainline before this branch gets pulled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26 11:59:20 +02:00
Alexandre Courbot c7caf86823 gpio: remove gpio_ensure_requested()
gpio_ensure_requested() has been introduced in Feb. 2008 by commit
d2876d08d8 to force users of the GPIO API to explicitly request GPIOs
before using them.

Hopefully by now all GPIOs are correctly requested and this extra check
can be omitted ; in any case the GPIO maintainers won't feel bad if
machines start failing after 6 years of warnings.

This patch removes that function from the dark ages.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-24 18:18:47 +02:00
Alexandre Courbot 7fd834ad77 gpio: remove useless check in gpiolib_sysfs_init()
An iterator variable cannot be NULL in its loop.

Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-24 16:03:45 +02:00
Guenter Roeck f7d4ad98fd gpiolib: Export gpiochip_request_own_desc and gpiochip_free_own_desc
Both functions were introduced to let gpio drivers request their own
gpio pins. Without exporting the functions, this can however only be
used by gpio drivers built into the kernel.

Secondary impact is that the functions can not currently be used by
platform initialization code associated with the gpio-pca953x driver.
This code permits auto-export of gpio pins through platform data, but
if this functionality is used, the module can no longer be unloaded due
to the problem solved with the introduction of gpiochip_request_own_desc
and gpiochip_free_own_desc.

Export both function so they can be used from modules and from
platform initialization code.

Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-24 10:25:00 +02:00
Linus Torvalds 02ec474746 Pin control fixes for v3.16:
- An IRQ handling fix for the STi driver, also for stable
 - Another IRQ fix for the RCAR GPIO driver
 - A MAINTAINERS entry
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTz6+qAAoJEEEQszewGV1z+o0QAJSXONx5WyVHNXGII24loIyQ
 035O3ENmTLP2RNiibREcOk4tAD3IuIW/GYL+rx1yCCU5fAzKdoG7bG53DfariTWO
 zSe+mUxdspKEiWGs3vXP5G2+UOD0dM+GytqduAIw6Uuwd9WcZkd46D4BLmFq0V0A
 ZcY4oGaB1JetEu2LVLAuMaUkWeRMVH3SQX+YwM7dNigljgMJSHo2FduRN0+A8nJD
 TpvdsZbAzsdNyH6oOnzzOAnpIRyL/TthPwnwUcEKVtcv8zj9A4gjB9fBObuR2v5L
 rncVdVV/2anWIsSjSnaXOSLni18wIxB1YDRanTI1tH3xAfCNQNCBjPrDzdoQcMvP
 B7MkYqRnl/ZGUq74kAixAozQJBLfzyLhV5G+1zAty81x1+gLITUD3ZkqwBqGvinY
 UMg2s3eHvW20ypc2i9cTj3VZeepjyzbQ0JaF7o1GiU3By9Igy+WJPu0OlDyxGoi0
 fZZRQHfyERcGqG71RwP7aBqWJLoerOG6hJ50vbcqlKw8/EBOJNN7eROvfNk06IYp
 2RqjXGu2MKcFZWGh6Os7tO1WUp14fXX6W3szwB47EGZAPrcgTb/3NMXoj61t6dba
 uGM/PXu5xensdc98r2Hd4iOp2Z6LN9/f/9Iqm9gR1dq8B6qn2389gNXIU6j3onFh
 UUzA3NVT3W5WiNdLU1es
 =pzyJ
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v3.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Here are three pin control fixes for the v3.16 series.  Sorry that
  some of these arrive late, the summer heat in Sweden makes me slow.

   - an IRQ handling fix for the STi driver, also for stable
   - another IRQ fix for the RCAR GPIO driver
   - a MAINTAINERS entry"

* tag 'pinctrl-v3.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  gpio: rcar: Add support for DT IRQ flags
  MAINTAINERS: Add entry for the Renesas pin controller driver
  pinctrl: st: Fix irqmux handler
2014-07-23 17:42:37 -07:00
Alexandre Courbot d82da79722 gpio: move gpio_ensure_requested() into legacy C file
gpio_ensure_requested() only makes sense when using the integer-based
GPIO API, so make sure it is called from there instead of the gpiod
API which we know cannot be called with a non-requested GPIO anyway.

The uses of gpio_ensure_requested() in the gpiod API were kind of
out-of-place anyway, so putting them in gpio-legacy.c helps clearing the
code.

Actually, considering the time this ensure_requested mechanism has been
around, maybe we should just turn this patch into "remove
gpio_ensure_requested()" if we know for sure that no user depend on it
anymore?

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-23 17:46:00 +02:00
Alexandre Courbot d74be6dfea gpio: remove gpiod_lock/unlock_as_irq()
gpio_lock/unlock_as_irq() are working with (chip, offset) arguments and
are thus not using the old integer namespace. Therefore, there is no
reason to have gpiod variants of these functions working with
descriptors, especially since the (chip, offset) tuple is more suitable
to the users of these functions (GPIO drivers, whereas GPIO descriptors
are targeted at GPIO consumers).

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-23 17:43:24 +02:00
Alexandre Courbot 1bd6b601fe gpio: make gpiochip_get_desc() gpiolib-private
As GPIO descriptors are not going to remain unique anymore, having this
function public is not safe. Restrain its use to gpiolib since we have
no user outside of it.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-23 17:41:12 +02:00
Alexandre Courbot 14141a9352 gpio: simplify gpiochip_export()
For some reason gpiochip_export() would invalidate all the descriptors
of a chip if exporting it to sysfs failed. This does not appear as
necessary. Remove that part of the code.

While we are at it, add a note about the non-safety of temporarily
releasing a spinlock in the middle of the loop that protects its
iterator, and explain why this is done.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-23 17:37:51 +02:00
Alexandre Courbot f63ad7ed71 gpio: remove export of private of_get_named_gpio_flags()
of_get_named_gpio_flags() has been made gpiolib-private by commit
f01d907582, but its EXPORT statement has not been removed. Fix this.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-23 17:36:20 +02:00
Guenter Roeck 2be0017392 gpio: Add support for GPIOF_ACTIVE_LOW to gpio_request_one functions
The gpio include file and the gpio documentation declare and document
GPIOF_ACTIVE_LOW as one of the flags to be passed to gpio_request_one
and related functions. However, the flag is not evaluated or used.

This can cause problems in at least two areas: First, the same API can
be used to auto-export pins to user space. The missing support for
GPIOF_ACTIVE_LOW results in unexpected behavior for such auto-exported
pins. Second, the requested gpio pin can be convered for use by
gpiod functions with gpio_to_desc(). While gpio API functions do not
support GPIOF_ACTIVE_LOW, gpiod functions do, which again results in
unexpected behavior.

Check the flag in gpio_request_one and set the gpio internal flag
FLAG_ACTIVE_LOW if it is set to address those problems.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-23 17:31:57 +02:00
Lars-Peter Clausen 190dc2e684 gpio: zynq: Clear pending interrupt when enabling a IRQ
The Zynq GPIO controller does not disable the interrupt detection when the
interrupt is masked and only disables the propagation of the interrupt. This
means when the controller detects an interrupt condition while the interrupt is
logically disabled (and masked) it will propagate the recorded interrupt event
once the interrupt is enabled. This will cause the interrupt consumer to see
spurious interrupts to prevent this first make sure that the interrupt is not
asserted and then enable it.

E.g. when a interrupt is requested with request_irq() it will be configured
according to the requested type (edge/level triggered, etc.) after that it will
be enabled. But the detection circuit might have already registered a false
interrupt before the interrupt type was correctly configured and once the
interrupt is unmasked this false interrupt will be propagated and the interrupt
handler for the just request interrupt will called.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-23 16:29:14 +02:00
abdoulaye berthe 9f5132ae82 gpio: remove all usage of gpio_remove retval in driver/gpio
Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-22 16:39:26 +02:00
Tomasz Figa 09ee2dac4c gpio: samsung: Remove legacy support of S5PV210
GPIO support of S5PV210 SoC is now fully handled by pinctrl-samsung
driver making the old code in gpio-samsung driver unused. This patch
removes it which will also let us remove more code from arch subtree.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-19 04:32:17 +09:00
Olof Johansson cb6a0fd4e4 This is a purge of all things <mach/gpio.h>, now I never
want to see it again.
 
 - Remove the need for <mach/gpio.h> from S5P
 - Kill CONFIG_NEED_MACH_GPIO_H
 - Kill remnants of ARM_GPIOLIB_COMPLEX
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTsbzlAAoJEEEQszewGV1zn6sP/A2gZCr2PGRjHyOSC7iUqBDi
 XEV8XchFPFDNaQH3Vlw9m5T/8HE6XoQ2qGF2N+l5HhZsmOHeoCvfko1MX9h/TjNM
 Eh6inWTVFyQ2xKPjsuj4mWVivxIZhRCsZ9WSZPnK2YqaWjd6JSkbcfiDiKKt/Tnp
 pcef7pIOWBIpNOKTTiCB8EBLc1umzmboyB6WuM1v4Mp5lpNmJMEeLBO9rcV+XaD2
 N9iZVbaRxGGFWZ6FyVCzUeF+0pIDjhyYjnLf5SMmv/mQ57VC2OuBdoZkyJWkBbVy
 re9CpFbUQMHbqQGiYjdInhcTne1oxS+OlTBseQ6agnDmZRLU1Ozr+NwBEHrpfPPv
 4uQ59AUCT6k3r8IJcGes4b+Rnjh96HTiJkE4UopYeTShcLpW5iaEI18sXpxoY8Fv
 ticSq34KDMBxZz22QWwumUuBHWZq47fxo0ufbqgTn5bqZ//PnDL7zy2frObmszuU
 Oubqs6ebLAsfa50eiQsz0gQ4cbjBDpQ0900C+09yZ6QzX4VsFfX5j7T49xJ2n3R+
 l6D7Xa7nJ4bnHyzjrGevmsflEz4FId6zpCOQfLJboc4agDzkOWKA1bPTsXa2DD0O
 qFBYgXBniZ+KeNwHfwFU94Qa3ukyE+GkDIyKRPY7vaAgHp8Dulm7tvcmyKWvcgY4
 pNdV7YOCcMgSQXcbA4+y
 =Gyiy
 -----END PGP SIGNATURE-----

Merge tag 'gpio-h-purge' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio into next/cleanup

This is a purge of all things <mach/gpio.h>, now I never
want to see it again.

- Remove the need for <mach/gpio.h> from S5P
- Kill CONFIG_NEED_MACH_GPIO_H
- Kill remnants of ARM_GPIOLIB_COMPLEX

* tag 'gpio-h-purge' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  ARM: delete old reference to ARM_GPIOLIB_COMPLEX
  ARM: kill CONFIG_NEED_MACH_GPIO_H
  ARM: mach-s5p: get rid of all <mach/gpio.h> headers
  ARM: s5p: cut the custom ARCH_NR_GPIOS definition

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-15 18:29:47 -07:00
Laurent Pinchart fe132649b5 gpio: rcar: Add support for DT IRQ flags
The gpio-rcar driver has no IRQ domain OF xlate function and thus
ignores IRQ flags specified in DT. Fix this by using the two-cell xlate
function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-15 20:55:15 +02:00
Kukjin Kim 0d551c3f0c gpio: samsung: remov s5pc100 related gpio codes
This patch removes gpio codes for s5pc100 SoC.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-13 07:35:12 +09:00
Harini Katakam 3242ba117e gpio: Add driver for Zynq GPIO controller
Add support for GPIO controller used by Xilinx Zynq.

v3 changes:
 - Use linux/gpio/driver.h instead of linux/gpio.h
 - Make irq a local variable in probe

v2 changes:
 - convert to pm_runtime_force_(suspend|resume)
 - add pm_runtime_set_active in probe()
 - also (un)prepare clocks when they are dis-/enabled
 - add some missing calls to pm_runtime_get()
 - use pm_runtime_put() instead of sync variant
 - remove gpio chip in driver remove()
 - remove redundant type casts
 - directly use IO helpers
 - use BIT macro to set/clear bits
 - migrate to GPIOLIB_IRQCHIP

Signed-off-by: Harini Katakam <harinik@xilinx.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-10 11:11:41 +02:00
Tushar Behera 85ea29ac1c gpiolib: of: Update debug messages for of_get_named_gpiod_flags
Following is the debug output (only a few examples) before and after
the patch.

$ dmesg | grep of_get_named_gpiod_flags

Before:
of_get_named_gpiod_flags: can't parse gpios property
 of node '/mmc@12220000[0]'
of_get_named_gpiod_flags exited with status 0

After:
of_get_named_gpiod_flags: can't parse 'wp-gpios' property
 of node '/mmc@12220000[0]'
of_get_named_gpiod_flags: parsed 'gpios' property of node
 '/gpio-keys/power[0]' - status (0)

Signed-off-by: Tushar Behera <tushar.b@samsung.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-09 12:22:58 +02:00
Alexandre Courbot 122c94dec7 gpio: move integer GPIO support to its own file
The old integer GPIO interface is, in effect, a privileged user of the
gpiod interface. Reflect this fact further by moving legacy GPIO support
into its own source file. This makes the code clearer and will allow us
to disable legacy GPIO support in the (far) future.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-09 12:22:57 +02:00
Alexandre Courbot 0eb4c6c267 gpio: move sysfs support to its own file
sysfs support is currently entangled within the core GPIO support, while
it should relly just be a (privileged) user of the integer GPIO API.
This patch is a first step towards making the gpiolib code more readable
by splitting it into logical parts.

Move all sysfs support to their own source file, and share static
members of gpiolib that need to be in the private gpiolib.h file. In
the future we will want to put some of them back into gpiolib.c, but this
first patch let us at least identify them.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-09 12:22:57 +02:00
Alexandre Courbot 9c8318ff70 gpio: always compile label support
Compiling out GPIO labels results in a space gain so small that it can
hardly be justified. Labels can also be useful for printing debug
messages, so always keep them around.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-09 12:22:57 +02:00
Javier Martinez Canillas a0e827c68d gpio: omap: Add an omap prefix to all functions
The GPIO OMAP driver didn't have a consistent naming scheme for
all its functions. Some of them had an omap prefix while others
didn't. There are many advantages on having a separate namespace
for driver functions so let's add an "omap" prefix to all of them.

Signed-off-by: Javier Martinez Canillas <jmartinez@softcrates.net>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-09 12:22:56 +02:00
Javier Martinez Canillas 598f64d40d gpio: omap: Remove unneeded include
The <linux/irqchip/chained_irq.h> header is already included
when selecting GPIOLIB_IRQCHIP so there is no need to do it
in the driver. This is a left over from commit fb655f5
("gpio: omap: convert driver to use gpiolib irqchip").

Signed-off-by: Javier Martinez Canillas <jmartinez@softcrates.net>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-09 12:22:56 +02:00
Javier Martinez Canillas 55db60cc87 gpio: omap: Remove unnecessary lockdep class
GPIO irqchips assign to the cascaded IRQs their own lock class
in order to avoid warnings about lockdep recursions since that
allow the lockdep core to keep track of things.

Since commit e45d1c80 ("gpio: put GPIO IRQs into their own lock class")
there is no need to do this in a driver if it's using the GPIO
irqchip helpers since gpiolib already assigns a lockdep class.

Signed-off-by: Javier Martinez Canillas <jmartinez@softcrates.net>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-09 12:22:55 +02:00
Rickard Strandqvist 31a3f9da4e gpio: gpio-ucb1400.c: Cleaning up null pointer checks that could never happen
Removal of null pointer checks that could never happen

This was found using a static code analysis program called cppcheck

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-09 12:22:55 +02:00
Rickard Strandqvist fe5e23d3c9 gpio: gpio-twl4030.c: Cleaning up null pointer checks that could never happen
Removal of null pointer checks that could never happen

This was found using a static code analysis program called cppcheck

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-09 12:22:55 +02:00
Linus Walleij 246a144eed gpio: vr41xx: fix up errorpath on probe()
The driver was not checking the return value from gpiochip_add()
properly, so add a bail-out check.

Reported-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-09 12:22:54 +02:00
Jürg Billeter 7cb5409b10 gpio: rcar: clamp returned value to [0,1]
While it will be clamped to bool by gpiolib, let's make this sane
in the driver as well.

Signed-off-by: Jürg Billeter <j@bitron.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-09 12:22:44 +02:00
Kukjin Kim a07a6a30af gpio: samsung: remove s5p64x0 related gpio codes
This patch removes gpio codes for s5p6440 and s5p6450 SoCs.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-08 07:28:49 +09:00
Andrew Ruder b41acf8869 gpio-pxa: gpio0 and gpio1 support on dt
pxa_gpio_probe() has some issues supporting the gpio0 and gpio1
interrupts under device-tree - it never actually sets up the chain
handler to get interrupts on edge detect for GPIO0 and GPIO1.

Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-07 12:54:28 +02:00
Michael Welling ef8290ac72 gpio: mcp23s08: Eliminates redundant checking.
Unnecessary checking was added during the merge of the gpio branch.
This patch removes the extra unnecessary checking.

Signed-off-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-05 01:14:06 +02:00
Linus Walleij 2fd48f9442 ARM: mach-s5p: get rid of all <mach/gpio.h> headers
This renames all the local <mach/gpio.h> headers in the S5P platforms
to <mach/gpio-samsung.h> indicating a scope local to this platform,
and cuts the implicit inclusion of <mach/gpio.h> from <linux/gpio.h>
by removing the use of NEED_MACH_GPIO_H from all S5P variants.

Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-30 21:37:21 +02:00
Lee Jones 8dbf2aa3c3 gpio: crystalcove: Fix implicit declaration of function 'seq_printf' error
drivers/gpio/gpio-crystalcove.c: In function 'crystalcove_gpio_dbg_show':
drivers/gpio/gpio-crystalcove.c:286:3: error: implicit declaration of function 'seq_printf'
   seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s %s\n",

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-19 16:56:28 +01:00
Jingoo Han 0fb394122a gpio: pxa: Make of_device_id array const
Make of_device_id array const, because all OF functions handle
it as const.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-19 09:31:17 +02:00
Jingoo Han e95c7c45a8 gpio: lpc32xx: Make of_device_id array const
Make of_device_id array const, because all OF functions handle
it as const.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-By: Roland Stigge <stigge@antcom.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-19 09:31:16 +02:00