* remove lot of update to different data structure
* add a seperate callback for zero copy request.
* above makes non zero copy code path simpler
* remove conditionalizing TREAD/TREADDIR/TWRITE in the zero copy path
* Fix the dotu p9_check_errors with zero copy. Add sufficient doc around
* Add support for both in and output buffers in zero copy callback
* pin and unpin pages in the same context
* use helpers instead of defining page offset and rest of page ourself
* Fix mem leak in p9_check_errors
* Remove 'E' and 'F' in p9pdu_vwritef
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
According to rfc5661 18.50, implement DESTROY_CLIENTID operation.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RFC5661 says:
The client may set one or both of
OPEN4_SHARE_ACCESS_WANT_SIGNAL_DELEG_WHEN_RESRC_AVAIL and
OPEN4_SHARE_ACCESS_WANT_PUSH_DELEG_WHEN_UNCONTENDED.
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We should call cifs_all_info_to_fattr in rc == 0 case only.
Cc: <stable@kernel.org>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Currently code make an impression what grow procedure is very complicated
and some mythical paths, blocks are involved. But in fact grow in depth
it relatively simple procedure:
1) Just create new meta block and copy root data to that block.
2) Convert root from extent to index if old depth == 0
3) Update root block pointer
This patch does:
- Reorganize code to make it more self explanatory
- Do not pass path parameter to new_meta_block() in order to
provoke allocation from inode's group because top-level block
should site closer to it's inode, but not to leaf data block.
[ This happens anyway, due to logic in mballoc; we should drop
the path parameter from new_meta_block() entirely. -- tytso ]
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In cifs_readv_receive we don't update rdata->result to error value
after kmap'ing a page. We should kunmap the page in the no error
case only.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Move the recently added readahead of the indirect pointer
tree during deallocation into its own function in order
that we can use it elsewhere in the future. Also this
fixes the resetting of the "first" variable in the
original patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The two variables being initialised in gfs2_inplace_reserve
to track the file & line number of the caller are never
used, so we might as well remove them.
If something does go wrong, then a stack trace is probably
more useful anyway.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Some items picked up through automated code analysis. A few bits
of unreachable code and two unchecked return values.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2's fallocate code currently goes through the page cache. Since it's only
writing to the end of the file or to holes in it, it doesn't need to, and it
was causing issues on low memory environments. This patch pulls in some of
Steve's block allocation work, and uses it to simply allocate the blocks for
the file, and zero them out at allocation time. It provides a slight
performance increase, and it dramatically simplifies the code.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch improves the performance of delete/unlink
operations in a GFS2 file system where the files are large
by adding a layer of metadata read-ahead for indirect blocks.
Mileage will vary, but on my system, deleting an 8.6G file
dropped from 22 seconds to about 4.5 seconds.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Bob reported:
I found an off-by-one problem with how I coded this section:
It should be:
+ else if (blk >= cur->rd_data0 + cur->rd_data)
In fact, cur->rd_data0 + cur->rd_data is the start of the next
rgrp (the next ri_addr), so without the "=" check it can land on
the wrong rgrp.
In all normal cases, this won't be a problem: you're searching
for a block _within_ the rgrp, which will pass the test properly.
Where it gets into trouble is if you search the rgrps for the
block exactly equal to ri_addr. I don't think anything in the
kernel does this, but I found a place in gfs2-utils gfs2_edit
where it does. So I definitely need to fix it in libgfs2. I'd
like to suggest we fix it in the kernel as well for the sake of
keeping the functions similar.
So this patch fixes the above mentioned off by one error as well
as removing the unused parent pointer.
Reported-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch brings gfs2's ->page_mkwrite uptodate with respect to the
expectations set by the VM. Also added is a check to wait if the fs
is frozen, before we attempt to get a glock. This will only work on
the node which initiates the freeze, but thats ok since the transaction
lock will still provide the expected barrier on other nodes.
The major change here is that we return a locked page now, except when
we don't return a page at all (error cases). This removes the race
which required rechecking the page after it was returned.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Unfortunately, it is not enough to just ignore locked buffers during
the AIL flush from fsync. We need to be able to ignore all buffers
which are locked, dirty or pinned at this stage as they might have
been added subsequent to the log flush earlier in the fsync function.
In addition, this means that we no longer need to rely on i_mutex to
keep out writes during fsync, so we can, as a side-effect, remove
that protection too.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Tested-By: Abhijith Das <adas@redhat.com>
Each block which is deallocated, requires a call to gfs2_rlist_add()
and each of those calls was calling gfs2_blk2rgrpd() in order to
figure out which rgrp the block belonged in. This can be speeded up
by making use of the rgrp cached in the inode. We also reset this
cached rgrp in case the block has changed rgrp. This should provide
a big reduction in gfs2_blk2rgrpd() calls during deallocation.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The recursive_scan() function only ever takes a single "bc"
argument, so we might as well just call do_strip() directly
from resource_scan() rather than pass it in as an argument.
Also the "data" argument is always a struct strip_mine, so
we can pass that in, rather than using a void pointer.
This also moves do_strip() ahead of recursive_scan() so that
we don't need to add a prototype.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Given that a resource group has been locked, there is no reason why
we should not be able to allocate as many blocks as are free. The
al_requested parameter should really be considered as a minimum
number of blocks to be available. Should this limit be overshot,
there are other mechanisms which will prevent over allocation.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This means that after the initial allocation for any inode, the
last used resource group is cached in the inode for future use.
This drastically reduces the number of lookups of resource
groups in the common case, and this the contention on that
data structure.
The allocation algorithm is the same as previously, except that we
always check to see if the goal block is within the cached rgrp
first before going to the rbtree to look one up.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since we have ruled out supporting online filesystem shrink,
it is possible to make the resource group list append only
during the life of a super block. This gives several benefits:
Firstly, we only need to read new rindex elements as they are added
rather than needing to reread the whole rindex file each time one
element is added.
Secondly, the rindex glock can be held for much shorter periods of
time, and is completely removed from the fast path for allocations.
The lock is taken in shared mode only when updating the resource
groups when the first allocation occurs, and after a grow has
taken place.
Thirdly, this results in a reduction in code size, and everything
gets a lot simpler to understand in this area.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Here is an update of Bob's original rbtree patch which, in addition, also
resolves the rather strange ref counting that was being done relating to
the bitmap blocks.
Originally we had a dual system for journaling resource groups. The metadata
blocks were journaled and also the rgrp itself was added to a list. The reason
for adding the rgrp to the list in the journal was so that the "repolish
clones" code could be run to update the free space, and potentially send any
discard requests when the log was flushed. This was done by comparing the
"cloned" bitmap with what had been written back on disk during the transaction
commit.
Due to this, there was a requirement to hang on to the rgrps' bitmap buffers
until the journal had been flushed. For that reason, there was a rather
complicated set up in the ->go_lock ->go_unlock functions for rgrps involving
both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference
count on the buffers.
However, the journal maintains a reference count on the buffers anyway, since
they are being journaled as metadata buffers. So by moving the code which deals
with the post-journal accounting for bitmap blocks to the metadata journaling
code, we can entirely dispense with the rather strange buffer ref counting
scheme and also the requirement to journal the rgrps.
The net result of all this is that the ->sd_rindex_spin is left to do exactly
one job, and that is to look after the rbtree or rgrps.
This patch is designed to be a stepping stone towards using RCU for the rbtree
of resource groups, however the reduction in the number of uses of the
->sd_rindex_spin is likely to have benefits for multi-threaded workloads,
anyway.
The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also
be removed in future in favour of calling the functions directly where required
in the code. That will allow locking of resource groups without needing to
actually read them in - something that could be useful in speeding up statfs.
In the mean time though it is valid to dereference ->bi_bh only when the rgrp
is locked. This is basically the same rule as before, modulo the references not
being valid until the following journal flush.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>
We need to take the inode's glock whenever the inode's size
is referenced, otherwise it might not be uptodate. Even
though generic_file_llseek_unlocked() doesn't implement
SEEK_DATA, SEEK_HOLE directly, it does reference the inode's
size in those cases, so we need to add them to the list
of origins which need the glock.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
If we pass through knowledge of whether the creation is intended to be
exclusive or not, then we can deal with that in gfs2_create_inode
and remove one set of locking. Also this removes the loop in
gfs2_create and simplifies the code a bit.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The aim of this patch is to use the newly enhanced ->dirty_inode()
super block operation to deal with atime updates, rather than
piggy backing that code into ->write_inode() as is currently
done.
The net result is a simplification of the code in various places
and a reduction of the number of gfs2_dinode_out() calls since
this is now implied by ->dirty_inode().
Some of the mark_inode_dirty() calls have been moved under glocks
in order to take advantage of then being able to avoid locking in
->dirty_inode() when we already have suitable locks.
One consequence is that generic_write_end() now correctly deals
with file size updates, so that we do not need a separate check
for that afterwards. This also, indirectly, means that fdatasync
should work correctly on GFS2 - the current code always syncs the
metadata whether it needs to or not.
Has survived testing with postmark (with and without atime) and
also fsx.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Journaled data requires that a complete flush of all dirty data for
the file is done, in order that the ail flush which comes after
will succeed.
Also the recently enhanced bug trap can trigger falsely in case
an ail flush from fsync races with a page read. This updates the
bug trap such that it will ignore buffers which are locked and
only trigger on dirty and/or pinned buffers when the ail flush
is run from fsync. The original bug trap is retained when ail
flush is run from ->go_sync()
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
If we have got far enough through the inode allocation code
path that an inode has already been allocated, then we must
call iput to dispose of it, if an error occurs during a
later part of the process. This will always be the final iput
since there will be no other references to the inode.
Unlike when the inode has been unlinked, its block state will
be GFS2_BLKST_INODE rather than GFS2_BLKST_UNLINKED so we need
to skip the test in ->evict_inode() for this one case in order
to ensure that it will be deallocated correctly. This patch adds
a new flag in order to ensure that this will happen correctly.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We do not need to start a transaction unless the atime
check has proved positive. Also if we are going to flush
the complete ail list anyway, we might as well skip the
writeback for this specific inode's metadata, since that
will be done as part of the ail writeback process in an
order offering potentially more efficient I/O.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The assert was being tested under the wrong lock, a
legacy of the original code. Also, if it does trigger,
the resulting information was not always a lot of help.
This moves the patch under the correct lock and also
prints out more useful information in tacking down the
source of the problem.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Now that the data writing is part of fsync proper, we can split
the waiting part out and do it later on. This reduces the
number of waits that we do during fsync on average.
There is also no need to take the i_mutex unless we are flushing
metadata to disk, so we can move that to within the metadata
flushing code.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since there is now only a single caller to gfs2_dir_read_data()
and it has a number of constant arguments, we can factor
those out. Also some tests relating to the inode size were
being done twice.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Quota file is fs's metadata, so it is reasonable to permit use
root resevation if necessary. This patch fix 265'th xfstest failure
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
As soon as the nfs_client gets created, its cl_rpcclient is set to
ERR_PTR(-EINVAL). The rpc client structure is allocated later. Check
if the client is ready before using the cl_rpcclient pointer.
Signed-off-by: Malahal Naineni <malahal@us.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If ext4_jbd2_file_inode() in mpage_da_map_and_submit() fails due to
journal abort, this function returns to caller without unlocking the
page. It leads to the deadlock, and the patch fixes this issue by
calling mpage_da_submit_io().
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If ext4_jbd2_file_inode() in ext4_ordered_write_end() fails for some
reasons, this function returns to caller without unlocking the page.
It leads to the deadlock, and the patch fixes this issue.
Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add support to print nostrictsync and noperm mount options in
/proc/mounts for shares mounted with these options.
(cleanup merge conflict in Sachin's original patch)
Suggested-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
sysfs is a core piece of ifrastructure that many people use and
few people have all of the rules in their head on how to use
it correctly. Add warnings for people using tagged directories
improperly to that any misuses can be caught and diagnosed quickly.
A single inexpensive test in sysfs_find_dirent is almost sufficient
to catch all possible misuses. An additional warning is needed
in sysfs_add_dirent so that we actually fail when attempting to
add an untagged dirent in a tagged directory.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that /sys/class/net/bonding_masters is implemented as a tagged sysfs
file we can remove support for untagged files in tagged directories.
This change removes any ambiguity of what a NULL namespace value
means. A NULL namespace parameter after this patch means
that we are talking about an untagged sysfs dirent.
This makes the sysfs code much less prone to mistakes when during
maintenance.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Looking up files in sysfs is hard to understand and analyize because we
currently allow placing untagged files in tagged directories. In the
implementation of that we have two subtly different meanings of NULL.
NULL meaning there is no tag on a directory entry and NULL meaning
we don't care which namespace the lookup is performed for. This
multiple uses of NULL have resulted in subtle bugs (since fixed)
in the code.
Currently it is only the bonding driver that needs to have an untagged
file in a tagged directory.
To untagle this mess I am adding support for tagged files to sysfs.
Modifying the bonding driver to implement bonding_masters as a tagged
file. Registering bonding_masters once for each network namespace.
Then I am removing support for untagged entries in tagged sysfs
directories.
Resulting in code that is much easier to reason about.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't rely on the PageError flag to tell us if one of the partial reads of
the page failed. Instead, replace that with a dedicated flag in the
struct nfs_page.
Then clean out redundant uses of the PageError flag: the VM no longer
checks it for reads.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
CIFS currently uses wait_event_killable to put tasks to sleep while
they await replies from the server. That function though does not
allow the freezer to run. In many cases, the network interface may
be going down anyway, in which case the reply will never come. The
client then ends up blocking the computer from suspending.
Fix this by adding a new wait_event_freezable variant --
wait_event_freezekillable. The idea is to combine the behavior of
wait_event_killable and wait_event_freezable -- put the task to
sleep and only allow it to be awoken by fatal signals, but also
allow the freezer to do its job.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Tune bdi.ra_pages to be a multiple of the rsize. This prevents the VFS
from asking for pages that require small reads to satisfy.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Currently we cap the rsize at a value that fits in CIFSMaxBufSize. That's
not needed any longer for readpages. Allow the use of larger values for
readpages. cifs_iovec_read and cifs_read however are still limited to the
CIFSMaxBufSize. Make sure they don't exceed that.
The patch also changes the rsize defaults. The default when unix
extensions are enabled is set to 1M for parity with the wsize, and there
is a hard cap of ~16M.
When unix extensions are not enabled, the default is set to 60k. According
to MS-CIFS, Windows servers can only send a max of 60k at a time, so
this is more efficient than requesting a larger size. If the user wishes
however, the max can be extended up to 128k - the length of the READ_RSP
header.
Really old servers however require a special hack to ensure that we don't
request too large a read.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Now that we have code in place to do asynchronous reads, convert
cifs_readpages to use it. The new cifs_readpages walks the page_list
that gets passed in, locks and adds the pages to the pagecache and
sets up cifs_readdata to handle the reads.
The rest is handled by the cifs_async_readv infrastructure.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
...which will allow cifs to do an asynchronous read call to the server.
The caller will allocate and set up cifs_readdata for each READ_AND_X
call that should be issued on the wire. The pages passed in are added
to the pagecache, but not placed on the LRU list yet (as we need the
page->lru to keep the pages on the list in the readdata).
When cifsd identifies the mid, it will see that there is a special
receive handler for the call, and use that to receive the rest of the
frame. cifs_readv_receive will then marshal up a kvec array with
kmapped pages from the pagecache, which eliminates one copy of the
data. Once the data is received, the pages are added to the LRU list,
set uptodate, and unlocked.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
There is no pad, and it simplifies the code to remove the "Data" field.
None of the existing code relies on these fields, or on the READ_RSP
being a particular length.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
In order to handle larger SMBs for readpages and other calls, we want
to be able to read into a preallocated set of buffers. Rather than
changing all of the existing code to preallocate buffers however, we
instead add a receive callback function to the MID.
cifsd will call this function once the mid_q_entry has been identified
in order to receive the rest of the SMB. If the mid can't be identified
or the receive pointer is unset, then the standard 3rd phase receive
function will be called.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Move the entire 3rd phase of the receive codepath into a separate
function in preparation for the addition of a pluggable receive
function.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
In order to receive directly into a preallocated buffer, we need to ID
the mid earlier, before the bulk of the response is read. Call the mid
finding routine as soon as we're able to read the mid.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
We have several functions that need to access these pointers. Currently
that's done with a lot of double pointer passing. Instead, move them
into the TCP_Server_Info and simplify the handling.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Change find_cifs_mid to only return NULL if a mid could not be found.
If we got part of a multi-part T2 response, then coalesce it and still
return the mid. The caller can determine the T2 receive status from
the flags in the mid.
With this change, there is no need to pass a pointer to "length" as
well so just pass by value. If a mid is found, then we can just mark
it as malformed. If one isn't found, then the value of "length" won't
change anyway.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Begin breaking up find_cifs_mid into smaller pieces. The parts that
coalesce T2 responses don't really need to be done under the
GlobalMid_lock anyway. Create a new function that just finds the
mid on the list, and then later takes it off the list if the entire
response has been received.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Have the demultiplex thread receive just enough to get to the MID, and
then find it before receiving the rest. Later, we'll use this to swap
in a preallocated receive buffer for some calls.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Having to continually allocate a new kvec array is expensive. Allocate
one that's big enough, and only reallocate it as needed.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Eventually we'll want to allow cifsd to read data directly into the
pagecache. In order to do that we'll need a routine that can take a
kvec array and pass that directly to kernel_recvmsg.
Unfortunately though, the kernel's recvmsg routines modify the kvec
array that gets passed in, so we need to use a copy of the kvec array
and refresh that copy on each pass through the loop.
Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
0c12eaffdf "nfsd: don't break lease on
CLAIM_DELEGATE_CUR" was a temporary workaround for a problem fixed
properly in the vfs layer by 778fc546f7
"locks: fix tracking of inprogress lease breaks", so we can revert that
change (but keeping some minor cleanup from that commit).
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Both LOOKUP and OPEN operations may return NFS4ERR_BADNAME if we send a
an invalid name as a filename argument. As far as the application is
concerned, it just has to know that the file doesn't exist, and so
ENOENT would be the appropriate reply. We should only return EINVAL
if the filename is being used to _create_ a new object on the
remote filesystem.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I intended to do this as part of fixing part of the conflict with
the merge with Linus' tree, but evidently it didn't get included in
the commit.
Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
commit ae50c0b5 "pnfs: client stats" added additional information to
the output of /proc/self/mountstats. The new functions introduced are
only used in this file and should be marked static.
If CONFIG_NFS_V4_1 is not defined, empty stub functions are used. If
CONFIG_NFS_V4 is not defined these stub functions are not used at all.
Adding static for the functions results in compile warnings:
fs/nfs/super.c:743: warning: 'show_sessions' defined but not used
fs/nfs/super.c:756: warning: 'show_pnfs' defined but not used
Fix this by adding a #ifdef CONFIG_NFS_V4 guard around the two
show_ functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
bl_add_page_to_bio returns error pointer. bio should be reset to
NULL in failure cases as the out path always calls bl_submit_bio.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For pnfs pagelist read failure, we need to pg_recoalesce and resend IO to
mds.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For pnfs pagelist write failure, we need to pg_recoalesce and resend IO to
mds.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
file layout and block layout both use it to set mark layout io failure
bit. So make it generic.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The same function is used by idmap, gss and blocklayout code. Make it
generic.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make the status field explicitly 32 bits. "...it's unlikely that the kernel
and userspace would differ on the size of an int here, but it might be a
good idea to go ahead and make that explicitly 32 bits in case we end up
dealing with more exotic arches at some point in the future."
Suggested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Always return PTR_ERR, not NULL, from nfs4_blk_get_deviceinfo and
nfs4_blk_decode_device.
Check for IS_ERR, not NULL, in bl_set_layoutdriver when calling
nfs4_blk_get_deviceinfo.
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_find_and_lock_request will take a reference to the nfs_page and
will then put it if the req is already locked. It's possible though
that the reference will be the last one. That put then can kick off
a whole series of reference puts:
nfs_page
nfs_open_context
dentry
inode
If the inode ends up being deleted, then the VFS will call
truncate_inode_pages. That function will try to take the page lock, but
it was already locked when migrate_page was called. The code
deadlocks.
Fix this by simply refusing the migration request if PagePrivate is
already set, indicating that the page is already associated with an
active read or write request.
We've had a customer test a backported version of this patch and
the preliminary results seem good.
Cc: stable@kernel.org
Cc: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Harshula Jayasuriya <harshula@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The result from ipv6_addr_scope() always not be a single SCOPE,
so we can't use equal to compare the result with IPV6_ADDR_SCOPE_LINKLOCAL
at nfs_sockaddr_match_ipaddr6.
This patch fixs the problem, and lets checking address before scope_id.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
commit 420e3646 allowed the kernel to reduce the number of unnecessary
commit calls by skipping the commit when there are a large number of
outstanding pages.
However, the current test in nfs_commit_unstable_pages does not handle
the edge condition properly. When ncommit == 0, then that means that the
kernel doesn't need to do anything more for the inode. The current test
though in the WB_SYNC_NONE case will return true, and the inode will end
up being marked dirty. Once that happens the inode will never be clean
until there's a WB_SYNC_ALL flush.
Fix this by immediately returning from nfs_commit_unstable_pages when
ncommit == 0.
Mike noticed this problem initially in RHEL5 (2.6.18-based kernel) which
has a backported version of 420e3646. The inode cache there was growing
very large. The inode cache was unable to be shrunk since the inodes
were all marked dirty. Calling sync() would essentially "fix" the
problem -- the WB_SYNC_ALL flush would result in the inodes all being
marked clean.
What I'm not clear on is how big a problem this is in mainline kernels
as the writeback code there is very different. Either way, it seems
incorrect to re-mark the inode dirty in this case.
Reported-by: Mike McLean <mikem@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@kernel.org [2.6.34+]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This reverts commit b80c3cb628.
The reverted commit was rendered obsolete by a VFS fix: commit
5547e8aac6 (writeback: Update dirty flags in
two steps). We now no longer need to worry about writeback_single_inode()
missing our marking the inode for COMMIT in 'do_writepages()' call.
Reverting this patch, fixes a performance regression in which the inode
would continuously get queued to the dirty list, causing the writeback
code to unnecessarily try to send a COMMIT.
Signed-off-by: Trond Myklebust <Trond.Myklebust>
Tested-by: Simon Kirby <sim@hostway.ca>
Cc: stable@kernel.org [2.6.35+]
Automounting directories are now invalidated by .d_revalidate()
so to be d_instantiate()d again with the right DCACHE_NEED_AUTOMOUNT
flag
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Smatch complains that the cast to "int" in min_t() changes very large
values of current_read_size into negative values and so min_t()
could return the wrong value. I removed the const as well, as that
doesn't do anything here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The third parameter to ext4_free_blocks is a struct buffer_head *. This
parameter should be NULL not 0.
This quiets the sparse noise:
warning: Using plain integer as NULL pointer
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function declarations in ext4.h are already marked extern, so it's
not necessary to do so in the .c files.
This quiets the sparse noise:
warning: function 'ext4_flush_completed_IO' with external linkage has definition
warning: function 'ext4_init_inode_table' with external linkage has definition
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add block plug for ext4 .writepages. Though ext4 .writepages
already handles request merge very well, block plug is still
helpful to reduce block lock contention.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
As part of startup, the MMP initialization code does this:
mmp->mmp_seq = seq = cpu_to_le32(mmp_new_seq());
Next, mmp->mmp_seq is written out to disk, a delay happens, and then
the MMP block is read back in and the sequence value is tested:
if (seq != le32_to_cpu(mmp->mmp_seq)) {
/* fail the mount */
On a LE system such as x86, the *le32* functions do nothing and this
works. Unfortunately, on a BE system such as ppc64, this comparison
becomes:
if (cpu_to_le32(new_seq) != le32_to_cpu(cpu_to_le32(new_seq)) {
/* fail the mount */
Except for a few palindromic sequence numbers, this test always causes
the mount to fail, which makes MMP filesystems generally unmountable
on ppc64. The attached patch fixes this situation.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Current logic would print an error message only once, and then
'failed_writes' would stay at 1. Rework the loop to increment
'failed_writes' and print the error message every
s_mmp_update_interval * 60 seconds, as intended according to the
comment.
Signed-off-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com>
Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Andreas Dilger <adilger@dilger.ca>
sysname holds "Linux" by default, i.e. what appears when doing a "uname
-s"; nodename should be used to print the machine's hostname, i.e. what
is returned when doing a "uname -n" or "hostname", and what
gethostname(2)/sethostname(2) manipulate, in order to notify the
administrator of the node which is contending to mount the filesystem.
Acked-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Nikitas Angelinas <nikitas_angelinas@xyratex.com>
Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we create the object and then return failure to the client, we're
left with an unexpected file in the filesystem.
I'm trying to eliminate such cases but not 100% sure I have so an
assertion might be helpful for now.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
As with the nfs4_file, we'd prefer to find out about any failure before
creating a new file rather than after.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move idr preallocation out of stateid initialization, into stateid
allocation, so that we no longer have to handle any errors from the
former.
This is a little subtle due to the way the idr code manages these
preallocated items--document that in comments.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Creating a new file is an irrevocable step--once it's visible in the
filesystem, other processes may have seen it and done something with it,
and unlinking it wouldn't simply undo the effects of the create.
Therefore, in the case where OPEN creates a new file, we shouldn't do
the create until we know that the rest of the OPEN processing will
succeed.
For example, we should preallocate a struct file in case we need it
until waiting to allocate it till process_open2(), which is already too
late.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If process_open1() creates a new open owner, but the open later fails,
the current code will leave the open owner around. It won't be on the
close_lru list, and the client isn't expected to send a CLOSE, so it
will hang around as long as the client does.
Similarly, if process_open1() removes an existing open owner from the
close lru, anticipating that an open owner that previously had no
associated stateid's now will, but the open subsequently fails, then
we'll again be left with the same leak.
Fix both problems.
Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There doesn't seem to be any harm to renewing the client a bit earlier,
when it is looked up. That saves us from having to sprinkle
renew_client calls over quite so many places.
Also remove a redundant comment and do a little cleanup.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Resolved conflicts:
fs/xfs/xfs_trans_priv.h:
- deleted struct xfs_ail field xa_flags
- kept field xa_log_flush in struct xfs_ail
fs/xfs/xfs_trans_ail.c:
- in xfsaild_push(), in XFS_ITEM_PUSHBUF case, replaced
"flush_log = 1" with "ailp->xa_log_flush++"
Signed-off-by: Alex Elder <aelder@sgi.com>
Add a sanity check to make sure ix hasn't gone beyond the valid bounds
of the extent block.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now build security descriptor to change either owner or group at the
server. Initially security descriptor was built to change only
(D)ACL, that functionality has been extended.
When either an Owner or a Group of a file object at the server is changed,
rest of security descriptor remains same (DACL etc.).
To set security descriptor, it is necessary to open that file
with permission bits of either WRITE_DAC if DACL is being modified or
WRITE_OWNER (Take Ownership) if Owner or Group is being changed.
It is the server that decides whether a set security descriptor with
either owner or group change succeeds or not.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
This should be a bitwise negate here. It silences a Sparse warning:
fs/nfsd/nfs4xdr.c:693:16: warning: dubious: x & !y
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Current ore_check_io API receives a residual
pointer, to report partial IO. But it is actually
not used, because in a multiple devices IO there
is never a linearity in the IO failure.
On the other hand if every failing device is reported
through a received callback measures can be taken to
handle only failed devices. One at a time.
This will also be needed by the objects-layout-driver
for it's error reporting facility.
Exofs is not currently using the new information and
keeps the old behaviour of failing the complete IO in
case of an error. (No partial completion)
TODO: Use an ore_check_io callback to set_page_error only
the failing pages. And re-dirty write pages.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
All users of the ore will need to check if current code
supports the given layout. For example RAID5/6 is not
currently supported.
So move all the checks from exofs/super.c to a new
ore_verify_layout() to be used by ore users.
Note that any new layout should be passed through the
ore_verify_layout() because the ore engine will prepare
and verify some internal members of ore_layout, and
assumes it's called.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Users like the objlayout-driver would like to only pass
a partial device table that covers the IO in question.
For example exofs divides the file into raid-group-sized
chunks and only serves group_width number of devices at
a time.
The partiality is communicated by setting
ore_componets->first_dev and the array covers all logical
devices from oc->first_dev upto (oc->first_dev + oc->numdevs)
The ore_comp_dev() API receives a logical device index
and returns the actual present device in the table.
An out-of-range dev_index will BUG.
Logical device index is the theoretical device index as if
all the devices of a file are present. .i.e:
total_devs = group_width * mirror_p1 * group_count
0 <= dev_index < total_devs
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Memory conditions and max_bio constraints might cause us to
not comply to the full length of the requested IO. Instead of
failing the complete IO we can issue a shorter read/write and
report how much was actually executed in the ios->length
member.
All users must check ios->length at IO_done or upon return of
ore_read/write and re-issue the reminder of the bytes. Because
other wise there is no error returned like before.
This is part of the effort to support the pnfs-obj layout driver.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
If at read/write_done the actual IO was shorter then requested,
reported in returned ios->length. It is not an error. The reminder
of the pages should just be unlocked but not marked uptodate or
end_page_writeback. They will be re issued later by the VFS.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Move the check and preparation of the ios->kern_buff case to
later inside _write_mirror().
Since read was never used with ios->kern_buff its support is removed
instead of fixed.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Now that each ore_io_state covers only a single raid group.
A single striping_info math is needed. Embed one inside
ore_io_state to cache the calculation results and eliminate
an extra call.
Also the outer _prepare_for_striping is removed since it does nothing.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Usually a single IO is confined to one group of devices
(group_width) and at the boundary of a raid group it can
spill into a second group. Current code would allocate a
full device_table size array at each io_state so it can
comply to requests that span two groups. Needless to say
that is very wasteful, specially when device_table count
can get very large (hundreds even thousands), while a
group_width is usually 8 or 10.
* Change ore API to trim on IO that spans two raid groups.
The user passes offset+length to ore_get_rw_state, the
ore might trim on that length if spanning a group boundary.
The user must check ios->length or ios->nrpages to see
how much IO will be preformed. It is the responsibility
of the user to re-issue the reminder of the IO.
* Modify exofs To copy spilled pages on to the next IO.
This means one last kick is needed after all coalescing
of pages is done.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: revert to using a kthread for AIL pushing
xfs: force the log if we encounter pinned buffers in .iop_pushbuf
xfs: do not update xa_last_pushed_lsn for locked items
that let us do local lock checks before requesting to the server.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Rename it for better clarity as to what it does and have the caller pass
in just the single type byte. Turn the if statement into a switch and
optimize it by placing the most common message type at the top. Move the
header length check back into cifs_demultiplex_thread in preparation
for adding a new receive phase and normalize the cFYI messages.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Split cifs_lock into several functions and let CIFSSMBLock get pid
as an argument.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
..the length field has only 17 bits.
Cc: <stable@kernel.org>
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Move the iovec handling entirely into read_from_socket. That simplifies
the code and gets rid of the special handling for header reads. With
this we can also get rid of the "goto incomplete_rcv" label in the main
demultiplex thread function since we can now treat header and non-header
receives the same way.
Also, make it return an int (since we'll never receive enough to worry
about the sign bit anyway), and simply make it return the amount of bytes
read or a negative error code.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Add data structures and functions necessary to map a uid and gid to SID.
These functions are very similar to the ones used to map a SID to uid and gid.
This time, instead of storing sid to id mapping sorted on a sid value,
id to sid is stored, sorted on an id.
A cifs upcall sends an id (uid or gid) and expects a SID structure
in return, if mapping was done successfully.
A failed id to sid mapping to EINVAL.
This patchset aims to enable chown and chgrp commands when
cifsacl mount option is specified, especially to Windows SMB servers.
Currently we can't do that. So now along with chmod command,
chown and chgrp work.
Winbind is used to map id to a SID. chown and chgrp use an upcall
to provide an id to winbind and upcall returns with corrosponding
SID if any exists. That SID is used to build security descriptor.
The DACL part of a security descriptor is not changed by either
chown or chgrp functionality.
cifs client maintains a separate caches for uid to SID and
gid to SID mapping. This is similar to the one used earlier
to map SID to id (as part of ID mapping code).
I tested it by mounting shares from a Windows (2003) server by
authenticating as two users, one at a time, as Administrator and
as a ordinary user.
And then attempting to change owner of a file on the share.
Depending on the permissions/privileges at the server for that file,
chown request fails to either open a file (to change the ownership)
or to set security descriptor.
So it all depends on privileges on the file at the server and what
user you are authenticated as at the server, cifs client is just a
conduit.
I compared the security descriptor during chown command to that
what smbcacls sends when it is used with -M OWNNER: option
and they are similar.
This patchset aim to enable chown and chgrp commands when
cifsacl mount option is specified, especially to Windows SMB servers.
Currently we can't do that. So now along with chmod command,
chown and chgrp work.
I tested it by mounting shares from a Windows (2003) server by
authenticating as two users, one at a time, as Administrator and
as a ordinary user.
And then attempting to change owner of a file on the share.
Depending on the permissions/privileges at the server for that file,
chown request fails to either open a file (to change the ownership)
or to set security descriptor.
So it all depends on privileges on the file at the server and what
user you are authenticated as at the server, cifs client is just a
conduit.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Suresh had a typo in his recent patch adding information on
the new oplock_endabled parm. Should be documented as in
directory /sys/module/cifs/parameters not /proc/module/cifs/parameters
Signed-off-by: Steve French <smfrench@gmail.com>
Add mount options backupuid and backugid.
It allows an authenticated user to access files with the intent to back them
up including their ACLs, who may not have access permission but has
"Backup files and directories user right" on them (by virtue of being part
of the built-in group Backup Operators.
When mount options backupuid is specified, cifs client restricts the
use of backup intents to the user whose effective user id is specified
along with the mount option.
When mount options backupgid is specified, cifs client restricts the
use of backup intents to the users whose effective user id belongs to the
group id specified along with the mount option.
If an authenticated user is not part of the built-in group Backup Operators
at the server, access to such files is denied, even if allowed by the client.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The plan is to deprecate this interface by kernel version 3.4.
Changes since v1
- add a '\n' to the printk.
Reported-by: Alexander Swen <alex@swen.nu>
Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <smfrench@gmail.com>
Reported-by: Alexander Swen <alex@swen.nu>
Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <smfrench@gmail.com>
Thus spake Jeff Layton:
"Making that a module parm would allow you to set that parameter at boot
time without needing to add special startup scripts. IMO, all of the
procfile "switches" under /proc/fs/cifs should be module parms
instead."
This patch doesn't alter the default behavior (Oplocks are enabled by
default).
To disable oplocks when loading the module, use
modprobe cifs enable_oplocks=0
(any of '0' or 'n' or 'N' conventions can be used).
To disable oplocks at runtime using the new interface, use
echo 0 > /sys/module/cifs/parameters/enable_oplocks
The older /proc/fs/cifs/OplockEnabled interface will be deprecated
after two releases. A subsequent patch will add an warning message
about this deprecation.
Changes since v2:
- make enable_oplocks a 'bool'
Changes since v1:
- eliminate the use of extra variable by renaming the old one to
enable_oplocks and make it an 'int' type.
Reported-by: Alexander Swen <alex@swen.nu>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <smfrench@gmail.com>
If the server stops sending data while in the middle of sending a
response then we still want to reconnect it if it doesn't come back.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
If msg_controllen is 0, then the socket layer should never touch these
fields. Thus, there's no need to continually reset them. Also, there's
no need to keep this field on the stack for the demultiplex thread, just
make it a local variable in read_from_socket.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
We have two versions of signature generating code. A vectorized and
non-vectorized version. Eliminate a large chunk of cut-and-paste
code by turning the non-vectorized version into a wrapper around the
vectorized one.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The variable names in this function are so ambiguous that it's very
difficult to know what it's doing. Rename them to make it a bit more
clear.
Also, remove a redundant length check. cifsd checks to make sure that
the rfclen isn't larger than the maximum frame size when it does the
receive.
Finally, change checkSMB to return a real error code (-EIO) when
it finds an error. That will help simplify some coming changes in the
callers.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
server->maxBuf is the maximum SMB size (including header) that the
server can handle. CIFSMaxBufSize is the maximum amount of data (sans
header) that the client can handle. Currently maxBuf is being capped at
CIFSMaxBufSize + the max headers size, and the two values are used
somewhat interchangeably in the code.
This makes little sense as these two values are not related at all.
Separate them and make sure the code uses the right values in the right
places.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
It should be 'CONFIG_CIFS_NFSD_EXPORT'. No-one noticed because that
symbol depends on BROKEN.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Steve French <smfrench@gmail.com>
...as that's more efficient when we know that the lengths are equal.
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Currently pstore write interface employs record id as return
value, but it is not enough because it can't tell caller if
the write operation is successful. Pass the record id back via
an argument pointer and return zero for success, non-zero for
failure.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The result from ipv6_addr_scope() is a set of flags, not a single value,
so we can't just compare the result with IPV6_ADDR_SCOPE_LINKLOCAL.
This patch fixs the problem, and checks for unequal addresses before
scope_id.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When we call xfs_flush_buftarg (generally from sync or umount) it already
is too late to flush the data workqueues, as I/O completion is signalled
for them and we are thus already done with the data we would flush here.
There are places where flushing them might be useful, but the current
sync interface doesn't give us that opportunity.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
The calling convention that returns a pointer to a static buffer is
fairly nasty, so just opencode it in the only caller that is left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Use xfs_ioerror_alert instead of opencoding a very similar error
message.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Instead of passing the block number and mount structure explicitly
get them off the bp and fix make the argument order more natural.
Also move it to xfs_buf.c and stop printing the device name given
that we already get the fs name as part of xfs_alert, and we know
what device is operates on because of the caller that gets printed,
finally rename it to xfs_buf_ioerror_alert and pass __func__ as
argument where it makes sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Change _xfs_buf_initialize to allocate the buffer directly and rename it to
xfs_buf_alloc now that is the only buffer allocation routine. Also remove
the xfs_buf_deallocate wrapper around the kmem_zone_free calls for buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
For each call to xfs_buf_stale we call xfs_buf_delwri_dequeue either
directly before or after it, or are guaranteed by the surrounding
conditionals that we are never called on delwri buffers. Simply
this situation by moving the call to xfs_buf_delwri_dequeue into
xfs_buf_stale.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
The code is unused and under a config option that doesn't exist, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
The code to flush buffers in the umount code is a bit iffy: we first
flush all delwri buffers out, but then might be able to queue up a
new one when logging the sb counts. On a normal shutdown that one
would get flushed out when doing the synchronous superblock write in
xfs_unmountfs_writesb, but we skip that one if the filesystem has
been shut down.
Fix this by moving the delwri list flushing until just before unmounting
the log, and while we're at it also remove the superflous delwri list
and buffer lru flusing for the rt and log device that can never have
cached or delwri buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Amit Sahrawat <amit.sahrawat83@gmail.com>
Tested-by: Amit Sahrawat <amit.sahrawat83@gmail.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Directories are only updated transactionally, which means fsync only
needs to flush the log the inode is currently dirty, but not bother
with checking for dirty data, non-transactional updates, and most
importanly doesn't have to flush disk caches except as part of a
transaction commit.
While the first two optimizations can't easily be measured, the
latter actually makes a difference when doing lots of fsync that do
not actually have to commit the inode, e.g. because an earlier fsync
already pushed the log far enough.
The new xfs_dir_fsync is identical to xfs_nfs_commit_metadata except
for the prototype, but I'm not sure creating a common helper for the
two is worth it given how simple the functions are.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
The AIL push code will issue a log force on ever single push loop
that it exits and has encountered pinned items. It doesn't rescan
these pinned items until it revisits the AIL from the start. Hence
we only need to force the log once per walk from the start of the
AIL to the target LSN.
This results in numbers like this:
xs_push_ail_flush..... 1456
xs_log_force......... 1485
For an 8-way 50M inode create workload - almost all the log forces
are coming from the AIL pushing code.
Reduce the number of log forces by only forcing the log if the
previous walk found pinned buffers. This reduces the numbers to:
xs_push_ail_flush..... 665
xs_log_force......... 682
For the same test.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Stats show that for an 8-way unlink @ ~80,000 unlinks/s we are doing
~1 million cache hit lookups to ~3000 buffer creates. That's almost
3 orders of magnitude more cahce hits than misses, so optimising for
cache hits is quite important. In the cache hit case, we do not need
to allocate a new buffer in case of a cache miss, so we are
effectively hitting the allocator for no good reason for vast the
majority of calls to _xfs_buf_find. 8-way create workloads are
showing similar cache hit/miss ratios.
The result is profiles that look like this:
samples pcnt function DSO
_______ _____ _______________________________ _________________
1036.00 10.0% _xfs_buf_find [kernel.kallsyms]
582.00 5.6% kmem_cache_alloc [kernel.kallsyms]
519.00 5.0% __memcpy [kernel.kallsyms]
468.00 4.5% __ticket_spin_lock [kernel.kallsyms]
388.00 3.7% kmem_cache_free [kernel.kallsyms]
331.00 3.2% xfs_log_commit_cil [kernel.kallsyms]
Further, there is a fair bit of work involved in initialising a new
buffer once a cache miss has occurred and we currently do that under
the rbtree spinlock. That increases spinlock hold time on what are
heavily used trees.
To fix this, remove the initialisation of the buffer from
_xfs_buf_find() and only allocate the new buffer once we've had a
cache miss. Initialise the buffer immediately after allocating it in
xfs_buf_get, too, so that is it ready for insert if we get another
cache miss after allocation. This minimises lock hold time and
avoids unnecessary allocator churn. The resulting profiles look
like:
samples pcnt function DSO
_______ _____ ___________________________ _________________
8111.00 9.1% _xfs_buf_find [kernel.kallsyms]
4380.00 4.9% __memcpy [kernel.kallsyms]
4341.00 4.8% __ticket_spin_lock [kernel.kallsyms]
3401.00 3.8% kmem_cache_alloc [kernel.kallsyms]
2856.00 3.2% xfs_log_commit_cil [kernel.kallsyms]
2625.00 2.9% __kmalloc [kernel.kallsyms]
2380.00 2.7% kfree [kernel.kallsyms]
2016.00 2.3% kmem_cache_free [kernel.kallsyms]
Showing a significant reduction in time spent doing allocation and
freeing from slabs (kmem_cache_alloc and kmem_cache_free).
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
There is no reason to keep a reference to the inode even if we unlock
it during transaction commit because we never drop a reference between
the ijoin and commit. Also use this fact to merge xfs_trans_ijoin_ref
back into xfs_trans_ijoin - the third argument decides if an unlock
is needed now.
I'm actually starting to wonder if allowing inodes to be unlocked
at transaction commit really is worth the effort. The only real
benefit is that they can be unlocked earlier when commiting a
synchronous transactions, but that could be solved by doing the
log force manually after the unlock, too.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Let the transaction commit unlock the inode before it potentially causes
a synchronous log force.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Only read the LSN we need to push to with the ilock held, and then release
it before we do the log force to improve concurrency.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Only read the LSN we need to push to with the ilock held, and then release
it before we do the log force to improve concurrency.
This also removes the only direct caller of _xfs_trans_commit, thus
allowing it to be merged into the plain xfs_trans_commit again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
XFS_TRANS_SWAPEXT is a transaction type, not a flag for xfs_trans_commit, so
don't pass it in xfs_swap_extents.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
In xfs_ioc_trim it is possible that computing the last allocation group
to discard might overflow for big start & len values, because the result
might be bigger then xfs_agnumber_t which is 32 bit long. Fix this by not
allowing the start and end block of the range to be beyond the end of the
file system.
Note that if the start is beyond the end of the file system we have to
return -EINVAL, but in the "end" case we have to truncate it to the fs
size.
Also introduce "end" variable, rather than using start+len which which
might be more confusing to get right as this bug shows.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Convert all function prototypes to the short form used elsewhere,
and remove duplicates of comments already placed at the function
body.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Fix a case in xfs_bmap_add_extent_unwritten_real where we aren't
passing the returned error on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
All the parameters passed to xfs_bmap_add_extent_hole_real() are in
the xfs_bmalloca structure now. Just pass the bmalloca parameter to
the function instead of 8 separate parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
All the parameters passed to xfs_bmap_add_extent_delay_real() are in
the xfs_bmalloca structure now. Just pass the bmalloca parameter to
the function instead of 8 separate parameters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Rather than passing the firstblock and freelist structure around,
embed it into the bmalloca structure and remove it from the function
parameters.
This also enables the minleft parameter to be set only once in
xfs_bmapi_write(), and the freelist cursor directly queried in
xfs_bmapi_allocate to clear it when the lowspace algorithm is
activated.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Rather that putting extent records on the stack and then pointing to
them in the bmalloca structure which is in the same stack frame, put
the extent records directly in the bmalloca structure. This reduces
the number of args that need to be passed around.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
All the variables xfs_bmap_isaeof() is passed are contained within
the xfs_bmalloca structure. Pass that instead.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
There is no real need to the xfs_bmap_add_extent, as the callers
know what kind of extents they need to it. Removing it means
duplicating the extents to btree conversion logic in three places,
but overall it's still much simpler code and quite a bit less code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Add a common helper for finding the last extent in a file.
Largely based on a patch from Dave Chinner.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Now that all the read-only users of xfs_bmapi have been converted to
use xfs_bmapi_read(), we can remove all the read-only handling cases
from xfs_bmapi().
Once this is done, rename xfs_bmapi to xfs_bmapi_write to reflect
the fact it is for allocation only. This enables us to kill the
XFS_BMAPI_WRITE flag as well.
Also clean up xfs_bmapi_write to the style used in the newly added
xfs_bmapi_read/delay functions.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
To further improve the readability of xfs_bmapi(), factor the
unwritten extent conversion out into a separate function. This
removes large block of logic from the xfs_bmapi() code loop and
makes it easier to see the operational logic flow for xfs_bmapi().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
To further improve the readability of xfs_bmapi(), factor the extent
allocation out into a separate function. This removes a large block
of logic from the xfs_bmapi() code loop and makes it easier to see
the operational logic flow for xfs_bmapi().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
We can just call xfs_bmap_add_extent_hole_delay directly to add a
delayed allocated regions to the extent tree, instead of going
through all the complexities of xfs_bmap_add_extent that aren't
needed for this simple case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Delalloc reservations are much simpler than allocations, so give
them a separate bmapi-level interface. Using the previously added
xfs_bmapi_reserve_delalloc we get a function that is only minimally
more complicated than xfs_bmapi_read, which is far from the complexity
in xfs_bmapi. Also remove the XFS_BMAPI_DELAY code after switching
over the only user to xfs_bmapi_delay.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Move the reservation of delayed allocations, and addition of delalloc
regions to the extent trees into a new helper function. For now
this adds some twisted goto logic to xfs_bmapi, but that will be
cleaned up in the following patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Now we have xfs_bmapi_read, there is no need for xfs_bmapi_single().
Change the remaining caller over and kill the function.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
xfs_bmapi() currently handles both extent map reading and
allocation. As a result, the code is littered with "if (wr)"
branches to conditionally do allocation operations if required.
This makes the code much harder to follow and causes significant
indent issues with the code.
Given that read mapping is much simpler than allocation, we can
split out read mapping from xfs_bmapi() and reuse the logic that
we have already factored out do do all the hard work of handling the
extent map manipulations. The results in a much simpler function for
the common extent read operations, and will allow the allocation
code to be simplified in another commit.
Once xfs_bmapi_read() is implemented, convert all the callers of
xfs_bmapi() that are only reading extents to use the new function.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
To further improve the readability of xfs_bmapi(), factor the pure
extent map manipulations out into separate functions. This removes
large blocks of logic from the xfs_bmapi() code loop and makes it
easier to see the operational logic flow for xfs_bmapi().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Instead of using a local variable that needs to updated when we modify
the extent map just check ifp->if_bytes directly where we use it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
We already have the worst case blocks reserved, so xfs_icsb_modify_counters
won't fail in xfs_bmap_add_extent_delay_real. In fact we've had an assert
to catch this case since day and it never triggered. So remove the code
to try smaller reservations, and just return the error for that case in
addition to keeping the assert.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Both xfs_bmap_add_extent_hole_delay and xfs_bmap_add_extent_hole_real
already contain code to handle the case where there is no extent to
merge with, which is effectively the same as the code duplicated here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
An attribute of inode can be fetched via xfs_vn_getattr() in XFS.
Currently it returns EIO, not negative value, when it failed. As a
result, the system call returns not negative value even though an
error occured. The stat(2), ls and mv commands cannot handle this
error and do not work correctly.
This patch fixes this bug, and returns -EIO, not EIO when an error
is detected in xfs_vn_getattr().
Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Fix the incorrect comment in the header of the function
_xfs_buf_find().
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Check the return value of xfs_trans_get_buf() and fail
appropriately.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Check the return value of xfs_buf_get() and fail appropriately.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Return unwritten extent conversion errors to aio_complete.
Skip both unwritten extent conversion and size updates if we had an
I/O error or the filesystem has been shut down.
Return -EIO to the aio/buffer completion handlers in case of a
forced shutdown.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently a buffered reader or writer can add pages to the pagecache
while we are waiting for the iolock in xfs_file_dio_aio_write. Prevent
this by re-checking mapping->nrpages after we got the iolock, and if
nessecary upgrade the lock to exclusive mode. To simplify this a bit
only take the ilock inside of xfs_file_aio_write_checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently xfs_attr_inactive causes a synchronous transactions if we are
removing a file that has any extents allocated to the attribute fork, and
thus makes XFS extremely slow at removing files with out of line extended
attributes. The code looks a like a relict from the days before the busy
extent list, but with the busy extent list we avoid reusing data and attr
extents that have been freed but not commited yet, so this code is just
as superflous as the synchronous transactions for data blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
We now have an i_dio_count filed and surrounding infrastructure to wait
for direct I/O completion instead of i_icount, and we have never needed
to iocount waits for buffered I/O given that we only set the page uptodate
after finishing all required work. Thus remove i_iocount, and replace
the actually needed waits with calls to inode_dio_wait.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
The current code relies on the xfs_ioend_wait call later on to make sure
all I/O actually has completed. The xfs_ioend_wait call will go away soon,
so prepare for that by using the waiting filemap function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
There is no reason to queue up ioends for processing in user context
unless we actually need it. Just complete ioends that do not convert
unwritten extents or need a size update from the end_io context.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
We really shouldn't complete AIO or DIO requests until we have finished
the unwritten extent conversion and size update. This means fsync never
has to pick up any ioends as all work has been completed when signalling
I/O completion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
No driver returns ENODEV from it bio completion handler, not has this
ever been documented. Remove the dead code dealing with it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
And also remove the strange local lock and delwri list pointers in a few
functions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Remove the xfs_buf_relse from xfs_bwrite and let the caller handle it to
mirror the delwri and read paths.
Also remove the mount pointer passed to xfs_bwrite, which is superflous now
that we have a mount pointer in the buftarg.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
