2f643105e5
ARM: dts: imx6: edmqmx6: change enet reset pin
...
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-08-18 14:42:14 +08:00
37183793f5
ARM: dts: imx6: edmqmx6: Add can bus
...
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18 16:49:43 +08:00
3c6c868594
ARM: dts: imx6: edmqmx6: Add two other i2c buses
...
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18 16:49:42 +08:00
fd101c4c56
ARM: dts: imx6: edmqmx6: Add PCIe support
...
Add support for the PCI express bus available on MX6 Data Modul
edm-qmx6 board.
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18 16:49:42 +08:00
e59d28e896
ARM: dts: imx6: edmqmx6: add vcc and vio power supplies to stmpe
...
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16 23:02:11 +08:00
819826a158
ARM: dts: imx6: edmqmx6: add SPI bus and flash
...
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16 23:02:08 +08:00
d02f74aa75
ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio
...
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16 23:02:08 +08:00
48f5196364
ARM: dts: Add stdout-path property to i.MX boards
...
This adds the stdout-path property to various i.MX boards. Values
of the property have been taken from barebox, so they should be
correct. Also, the older linux,stdout-path property is converted
to stdout-path.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-05-16 23:02:07 +08:00
52d13453df
ARM: dts: imx6: edmqmx6: add second STMPE
...
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14 10:22:38 +08:00
8dde78e8d6
ARM: dts: imx6: edmqmx6: USB H1 only supports host mode
...
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14 10:22:38 +08:00
465ca5dc4a
ARM: dts: imx6: edmqmx6: Do not use the OTG switch as VBUS regulator
...
GPIO7_12 switches the D+/D- USB lines on and off. When we use this as
VBUS regulator it means that USB device mode can never work as VBUS is
never turned on in Device mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14 10:22:38 +08:00
19f7cb6dec
ARM: dts: imx6: edmqmx6: Fix usbotg id pin
...
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-04-14 10:22:38 +08:00
c1f77e73a8
ARM: dts: imx6: Add support for imx6q dmo edmqmx6
...
Signed-off-by: Silvio F <silvio.fricke@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-02-09 21:29:01 +08:00
Silvio Fricke