We don't support Free Space Table and Free Space Bitmap as specified by
UDF standard for writing as we don't support erasing blocks before
overwriting them. Just drop the handling of these structures as
partition descriptor checking code already makes sure such filesystems
can be mounted only read-only.
Signed-off-by: Jan Kara <jack@suse.cz>
Fix a crash during an attempt to mount a filesystem that has both
Unallocated Space Table and Unallocated Space Bitmap. Such filesystem
actually violates the UDF standard so we just have to properly detect
such situation and refuse to mount such filesystem read-write. When we
are at it, verify also other constraints on the allocation information
mandated by the standard.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
There are certain filesystem features which we support for reading but
not for writing. We properly refuse to mount such filesystems read-write
however for some features (such as read-only partitions), we don't check
for these features when remounting the filesystem from read-only to
read-write. Thus such filesystems could be remounted read-write leading
to strange behavior (most likely crashes).
Fix the problem by marking in superblock whether the filesystem has some
features that are supported in read-only mode and check this flag during
remount.
Signed-off-by: Jan Kara <jack@suse.cz>
Win7 is creating UDF filesystems with single partition with number 8192.
Current partition descriptor scanning code does not handle this well as
it incorrectly assumes that partition numbers will form mostly contiguous
space of small numbers. This results in unmountable media due to errors
like:
UDF-fs: error (device dm-1): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
UDF-fs: warning (device dm-1): udf_fill_super: No fileset found
Fix the problem by handling partition descriptors in a way that sparse
partition numbering does not matter.
Reported-and-tested-by: jean-luc malet <jeanluc.malet@gmail.com>
CC: stable@vger.kernel.org
Fixes: 7b78fd02fb
Signed-off-by: Jan Kara <jack@suse.cz>
The VFS structures are finally converted to always use 64-bit timestamps,
and this file system can represent a long range of on-disk timestamps
already, so now let's fit in the missing bits for udf.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jan Kara <jack@suse.cz>
This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
There were no conflicts between this and the contents of linux-next
until just before the merge window, when we saw multiple problems:
- A minor conflict with my own y2038 fixes, which I could address
by adding another patch on top here.
- One semantic conflict with late changes to the NFS tree. I addressed
this by merging Deepa's original branch on top of the changes that
now got merged into mainline and making sure the merge commit includes
the necessary changes as produced by coccinelle.
- A trivial conflict against the removal of staging/lustre.
- Multiple conflicts against the VFS changes in the overlayfs tree.
These are still part of linux-next, but apparently this is no longer
intended for 4.18 [1], so I am ignoring that part.
As Deepa writes:
The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions.
Thomas Gleixner adds:
I think there is no point to drag that out for the next merge window.
The whole thing needs to be done in one go for the core changes which
means that you're going to play that catchup game forever. Let's get
over with it towards the end of the merge window.
[1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CZX2
-----END PGP SIGNATURE-----
Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
"This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
As Deepa writes:
'The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64
timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual replacement
becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions'
Thomas Gleixner adds:
'I think there is no point to drag that out for the next merge
window. The whole thing needs to be done in one go for the core
changes which means that you're going to play that catchup game
forever. Let's get over with it towards the end of the merge window'"
* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
pstore: Remove bogus format string definition
vfs: change inode times to use struct timespec64
pstore: Convert internal records to timespec64
udf: Simplify calls to udf_disk_stamp_to_time
fs: nfs: get rid of memcpys for inode times
ceph: make inode time prints to be long long
lustre: Use long long type to print inode time
fs: add timespec64_truncate()
Subsequent patches in the series convert inode timestamps
to use struct timespec64 instead of struct timespec as
part of solving the y2038 problem.
commit fd3cfad374 ("udf: Convert udf_disk_stamp_to_time() to use mktime64()")
eliminated the NULL return condition from udf_disk_stamp_to_time().
udf_time_to_disk_time() is always called with a valid dest pointer and
the return value is ignored.
Further, caller can as well check the dest pointer being passed in rather
than return argument.
Make both the functions return void.
This will make the inode timestamp conversion simpler.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: jack@suse.com
----
Changes from v1:
* fixed the pointer error pointed by Jan
iocharset= mount option specifies the character set used on *console*
(not on disk). So even dstrings from VRS need to be converted from CS0
to the specified charset and not always UTF-8. This is barely user
visible as those strings are shown only in UDF debug messages.
CC: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Jan Kara <jack@suse.cz>
UDF needs to convert strings between OSTA CS0 charset and standard UTF8.
Currently we implement our own utf-16 <-> utf-8 translations which is
unnecessary code duplication. Always select NLS so that we can use
translation functions from there.
Signed-off-by: Jan Kara <jack@suse.cz>
When specifiying iocharset multiple times in a mount or once/multiple in
a remount, current option parsing may cause inaccurate refcount of nls
module. Also, in the failure cleanup of option parsing, the condition
of calling unload_nls is not sufficient.
Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Signed-off-by: Jan Kara <jack@suse.cz>
If logical volume integrity descriptor contains non-closed integrity
type when mounting the volume, there are high chances that the volume is
not consistent (device was detached before the filesystem was
unmounted). Don't touch integrity type of such volume so that fsck can
recognize it and check such filesystem.
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently when UDF filesystem is recorded without uid / gid (ids are set
to -1), we will assign INVALID_[UG]ID to vfs inode unless user uses uid=
and gid= mount options. In such case filesystem could not be modified in
any way as VFS refuses to modify files with invalid ids (even by root).
This is confusing to users and not very useful default since such media
mode is generally used for removable media. Use overflow[ug]id instead
so that at least root can modify the filesystem.
Reported-by: Steve Kenton <skenton@ou.edu>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently uid=ignore and gid=ignore make no sense without uid=<number>
and gid=<number> respectively as they result in all files having invalid
uid / gid which then doesn't allow even root to modify files and thus
causes confusion. And since commit ca76d2d803 "UDF: fix UID and GID
mount option ignorance" (from over 10 years ago) uid=<number> overrides
all uids on disk as uid=ignore does. So just silently ignore uid=ignore
mount option.
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Current handling of Partition Descriptors in Volume Descriptor Sequence
is buggy in several ways. Firstly, it does not take descriptor sequence
numbers into account at all, thus any volume making serious use of them
would be unmountable. Secondly, it does not handle Volume Descriptor
Pointers or Volume Descriptor Sequence without Terminating Descriptor.
Fix these problems by properly remembering all Partition Descriptors in
the Volume Descriptor Sequence and their sequence numbers. This is made
more complicated by the fact that we don't know number of partitions in
advance and sequence numbers have to be tracked on per-partition basis.
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When scanning Volume Descriptor Sequence, several descriptors have
exactly the same handling. Unify it.
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Convert index definitions from defines to enum. It is a shorter
description and easier to modify. Also remove VDS_POS_VOL_DESC_PTR since
it is unused.
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
According to ECMA-167 3/8.4.2 a volume descriptor sequence can be
terminated also by an unrecorded block within the extent of volume
descriptor sequence. Currently we errored out in such case making such
volumes unmountable. Handle that case by treating any invalid block as a
block terminating the sequence.
Reported-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
According to ECMA-167 3/8.4.2 Volume Descriptor Pointer is terminating
current extent of Volume Descriptor Sequence. Also according to ECMA-167
3/8.4.3 Volume Descriptor Sequence Number is not significant for Volume
Descriptor Pointers. Simplify the handling of Volume Descriptor Pointers
to take this into account.
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
We pass one block beyond end of volume descriptor sequence into
process_sequence() as 'lastblock' instead of the last block of the
sequence. When the sequence is not terminated with TD descriptor, this
could lead to false errors due to invalid blocks in volume descriptor
sequence and thus unmountable volumes.
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix problems noted in compilion with -Wformat=2 -Wformat-signedness.
In particular, a mismatch between the signedness of a value and the
signedness of its format specifier can result in unsigned values being
printed as negative numbers, e.g.:
Partition (0 type 1511) starts at physical 460, block length -1779968542
...which occurs when mounting a large (> 1 TiB) UDF partition.
Changes since V1:
* Fixed additional issues noted in udf_bitmap_free_blocks(),
udf_get_fileident(), udf_show_options()
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Large (> 1 TiB) UDF filesystems appear subject to several problems when
mounted on 64-bit systems:
* readdir() can fail on a directory containing File Identifiers residing
above 0x7FFFFFFF. This manifests as a 'ls' command failing with EIO.
* FIBMAP on a file block located above 0x7FFFFFFF can return a negative
value. The low 32 bits are correct, but applications that don't mask the
high 32 bits of the result can perform incorrectly.
Per suggestion by Jan Kara, introduce a udf_pblk_t type for representation
of UDF block addresses. Ultimately, all driver functions that manipulate
UDF block addresses should use this type; for now, deployment is limited
to functions with actual or potential sign extension issues.
Changes to udf_readdir() and udf_block_map() address the issues noted
above; other changes address potential similar issues uncovered during
audit of the driver code.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When session starts beyond offset 2^31 the arithmetics in
udf_check_vsd() would overflow. Make sure the computation is done in
large enough type.
Reported-by: Cezary Sliwa <sliwa@ifpan.edu.pl>
Signed-off-by: Jan Kara <jack@suse.cz>
Pull mount flag updates from Al Viro:
"Another chunk of fmount preparations from dhowells; only trivial
conflicts for that part. It separates MS_... bits (very grotty
mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
only a small subset of MS_... stuff).
This does *not* convert the filesystems to new constants; only the
infrastructure is done here. The next step in that series is where the
conflicts would be; that's the conversion of filesystems. It's purely
mechanical and it's better done after the merge, so if you could run
something like
list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')
sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
-e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
-e 's/\<MS_NODEV\>/SB_NODEV/g' \
-e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
-e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
-e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
-e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
-e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
-e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
-e 's/\<MS_SILENT\>/SB_SILENT/g' \
-e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
-e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
-e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
-e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
$list
and commit it with something along the lines of 'convert filesystems
away from use of MS_... constants' as commit message, it would save a
quite a bit of headache next cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Differentiate mount flags (MS_*) from internal superblock flags
VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
Omit an extra message for a memory allocation failure in these functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Replace the specification of data structures by variable references
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jan Kara <jack@suse.cz>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The script “checkpatch.pl” pointed information out like the following.
Comparison to NULL could be written !…
Thus fix affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jan Kara <jack@suse.cz>
Firstly by applying the following with coccinelle's spatch:
@@ expression SB; @@
-SB->s_flags & MS_RDONLY
+sb_rdonly(SB)
to effect the conversion to sb_rdonly(sb), then by applying:
@@ expression A, SB; @@
(
-(!sb_rdonly(SB)) && A
+!sb_rdonly(SB) && A
|
-A != (sb_rdonly(SB))
+A != sb_rdonly(SB)
|
-A == (sb_rdonly(SB))
+A == sb_rdonly(SB)
|
-!(sb_rdonly(SB))
+!sb_rdonly(SB)
|
-A && (sb_rdonly(SB))
+A && sb_rdonly(SB)
|
-A || (sb_rdonly(SB))
+A || sb_rdonly(SB)
|
-(sb_rdonly(SB)) != A
+sb_rdonly(SB) != A
|
-(sb_rdonly(SB)) == A
+sb_rdonly(SB) == A
|
-(sb_rdonly(SB)) && A
+sb_rdonly(SB) && A
|
-(sb_rdonly(SB)) || A
+sb_rdonly(SB) || A
)
@@ expression A, B, SB; @@
(
-(sb_rdonly(SB)) ? 1 : 0
+sb_rdonly(SB)
|
-(sb_rdonly(SB)) ? A : B
+sb_rdonly(SB) ? A : B
)
to remove left over excess bracketage and finally by applying:
@@ expression A, SB; @@
(
-(A & MS_RDONLY) != sb_rdonly(SB)
+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
|
-(A & MS_RDONLY) == sb_rdonly(SB)
+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
)
to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: David Howells <dhowells@redhat.com>
udf_fill_super() used udf_parse_options() to flag UDF_FLAG_BLOCKSIZE_SET
when blocksize was specified otherwise used 512 bytes
(bdev_logical_block_size) and 2048 bytes (UDF_DEFAULT_BLOCKSIZE)
IOW both 1024 and 4096 specifications were required or resulted in
"mount: wrong fs type, bad option, bad superblock on /dev/loop1"
This patch loops through different block values but also updates
udf_load_vrs() to return -EINVAL instead of 0 when udf_check_vsd()
fails (and uopt->novrs = 0).
The later being the reason for the RFC; we have that case when mounting
a 4kb blocksize against other values but maybe VRS is not mandatory
there ?
Tested with 512, 1024, 2048 and 4096 blocksize
Reported-by: Jan Kara <jack@suse.com>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Kara <jack@suse.cz>
Move all module attributes at the end of one file like other FS.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Kara <jack@suse.cz>
CURRENT_TIME is not y2038 safe.
CURRENT_TIME macro is also not appropriate for filesystems
as it doesn't use the right granularity for filesystem
timestamps.
Logical Volume Integrity format is described to have the
same timestamp format for "Recording Date and time" as
the other [a,c,m]timestamps.
The function udf_time_to_disk_format() does this conversion.
Hence the timestamp is passed directly to the function and
not truncated. This is as per Arnd's suggestion on the
thread.
This is also in preparation for the patch that transitions
vfs timestamps to use 64 bit time and hence make them
y2038 safe. As part of the effort current_time() will be
extended to do range checks.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jan Kara <jack@suse.cz>
UDF/OSTA terminology is confusing. Partition Numbers (PNs) are arbitrary
16-bit values, one for each physical partition in the volume. Partition
Reference Numbers (PRNs) are indices into the the Partition Map Table
and do not necessarily equal the PN of the mapped partition.
The current metadata code mistakenly uses the PN instead of the PRN when
mapping metadata blocks to physical/sparable blocks. Windows-created
UDF 2.5 discs for some reason use large, arbitrary PNs, resulting in
mount failure and KASAN read warnings in udf_read_inode().
For example, a NetBSD UDF 2.5 partition might look like this:
PRN PN Type
--- -- ----
0 0 Sparable
1 0 Metadata
Since PRN == PN, we are fine.
But Windows could gives us:
PRN PN Type
--- ---- ----
0 8192 Sparable
1 8192 Metadata
So udf_read_inode() will start out by checking the partition length in
sbi->s_partmaps[8192], which is obviously out of bounds.
Fix this by creating a new field (s_phys_partition_ref) in struct
udf_meta_data, referencing whatever physical or sparable map has the
same partition number as the metadata partition.
[JK: Add comment about s_phys_partition_ref, change its name]
Signed-off-by: Alden Tondettar <alden.tondettar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Presently, a corrupted or malicious UDF filesystem containing a very large
number (or cycle) of Logical Volume Integrity Descriptor extent
indirections may trigger a stack overflow and kernel panic in
udf_load_logicalvolint() on mount.
Replace the unnecessary recursion in udf_load_logicalvolint() with
simple iteration. Set an arbitrary limit of 1000 indirections (which would
have almost certainly overflowed the stack without this fix), and treat
such cases as if there were no LVID.
Signed-off-by: Alden Tondettar <alden.tondettar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Commit 9293fcfbc1
("udf: Remove struct ustr as non-needed intermediate storage"),
while getting rid of 'struct ustr', does not take any special care
of 'dstring' fields and effectively use fixed field length instead
of actual string length, encoded in the last byte of the field.
Also, commit 484a10f493
("udf: Merge linux specific translation into CS0 conversion function")
introduced checking of the length of the string being converted,
requiring proper alignment to number of bytes constituing each
character.
The UDF volume identifier is represented as a 32-bytes 'dstring',
and needs to be converted from CS0 to UTF8, while mounting UDF
filesystem. The changes in mentioned commits can in some cases
lead to incorrect handling of volume identifier:
- if the actual string in 'dstring' is of maximal length and
does not have zero bytes separating it from dstring encoded
length in last byte, that last byte may be included in conversion,
thus making incorrect resulting string;
- if the identifier is encoded with 2-bytes characters (compression
code is 16), the length of 31 bytes (32 bytes of field length minus
1 byte of compression code), taken as the string length, is reported
as an incorrect (unaligned) length, and the conversion fails, which
in its turn leads to volume mounting failure.
This patch introduces handling of 'dstring' encoded length field
in udf_CS0toUTF8 function, that is used in all and only cases
when 'dstring' fields are converted. Currently these cases are
processing of Volume Identifier and Volume Set Identifier fields.
The function is also renamed to udf_dstrCS0toUTF8 to distinctly
indicate that it handles 'dstring' input.
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Although 'struct ustr' tries to structurize the data by combining
the string and its length, it doesn't actually make much benefit,
since it saves only one parameter, but introduces an extra copying
of the whole buffer, serving as an intermediate storage. It looks
quite inefficient and not actually needed.
This commit gets rid of the struct ustr by changing the parameters
of some functions appropriately.
Also, it removes using 'dstring' type, since it doesn't make much
sense too.
Just using the occasion, add a 'const' qualifier to udf_get_filename
to make consistent parameters sets.
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Actual name length restriction is 254 bytes, this is used in 'ustr'
structure, and this is what fits into UDF File Ident structures.
And in most cases the constant is used as UDF_NAME_LEN-2.
So, it's better to just modify the constant to make it closer
to reality.
Also, in some cases it's useful to have a separate constant for
the maximum length of file name field in CS0 encoding in UDF File
Ident structures.
Also, remove the unused UDF_PATH_LEN constant.
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Jan Kara <jack@suse.cz>
There are many locations that do
if (memory_was_allocated_by_vmalloc)
vfree(ptr);
else
kfree(ptr);
but kvfree() can handle both kmalloc()ed memory and vmalloc()ed memory
using is_vmalloc_addr(). Unless callers have special reasons, we can
replace this branch with kvfree(). Please check and reply if you found
problems.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Boris Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull UDF fixes and quota cleanups from Jan Kara:
"Several UDF fixes and some minor quota cleanups"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Check output buffer length when converting name to CS0
udf: Prevent buffer overrun with multi-byte characters
quota: constify qtree_fmt_operations structures
udf: avoid uninitialized variable use
udf: Fix lost indirect extent block
udf: Factor out code for creating indirect extent
udf: limit the maximum number of indirect extents in a row
udf: limit the maximum number of TD redirections
fs: make quota/dquot.c explicitly non-modular
fs: make quota/netlink.c explicitly non-modular
Mark those kmem allocations that are known to be easily triggered from
userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to
memcg. For the list, see below:
- threadinfo
- task_struct
- task_delay_info
- pid
- cred
- mm_struct
- vm_area_struct and vm_region (nommu)
- anon_vma and anon_vma_chain
- signal_struct
- sighand_struct
- fs_struct
- files_struct
- fdtable and fdtable->full_fds_bits
- dentry and external_name
- inode for all filesystems. This is the most tedious part, because
most filesystems overwrite the alloc_inode method.
The list is far from complete, so feel free to add more objects.
Nevertheless, it should be close to "account everything" approach and
keep most workloads within bounds. Malevolent users will be able to
breach the limit, but this was possible even with the former "account
everything" approach (simply because it did not account everything in
fact).
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Filesystem fuzzing revealed that we could get stuck in the
udf_process_sequence() loop.
The maximum limit was chosen arbitrarily but fixes the problem I saw.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When read-write mount of a filesystem is requested but we find out we
can mount the filesystem only in read-only mode, we still modify
LVID in udf_close_lvid(). That is both unnecessary and contrary to
expectation that when we fall back to read-only mount we don't modify
the filesystem.
Make sure we call udf_close_lvid() only if we called udf_open_lvid() so
that filesystem gets modified only if we verified we are allowed to
write to it.
Reported-by: Karel Zak <kzak@redhat.com>
Signed-off-by: Jan Kara <jack@suse.com>
There are some missing braces here which means this function never
succeeds.
Fixes: e9d4cf411f ('udf: improve error management in udf_CS0toUTF8()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
udf_CS0toUTF8() now returns -EINVAL on error.
udf_load_pvoldesc() and udf_get_filename() do the same.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jan Kara <jack@suse.cz>
Jan Kara