vmx_load_host_state() does not handle msrs switching (except
MSR_KERNEL_GS_BASE) since commit 26bb0981b3. Remove call to it
where it is no longer make sense.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently, write protecting a slot needs to walk all the shadow pages
and checks ones which have a pte mapping a page in it.
The walk is overly heavy when dirty pages in that slot are not so many
and checking the shadow pages would result in unwanted cache pollution.
To mitigate this problem, we use rmap_write_protect() and check only
the sptes which can be reached from gfns marked in the dirty bitmap
when the number of dirty pages are less than that of shadow pages.
This criterion is reasonable in its meaning and worked well in our test:
write protection became some times faster than before when the ratio of
dirty pages are low and was not worse even when the ratio was near the
criterion.
Note that the locking for this write protection becomes fine grained.
The reason why this is safe is descripted in the comments.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Needed for the next patch which uses this number to decide how to write
protect a slot.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
rmap_write_protect() calls gfn_to_rmap() for each level with gfn fixed.
This results in calling gfn_to_memslot() repeatedly with that gfn.
This patch introduces __gfn_to_rmap() which takes the slot as an
argument to avoid this.
This is also needed for the following dirty logging optimization.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Remove redundant checks and use is_large_pte() macro.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
The host side pv mmu support has been marked for feature removal in
January 2011. It's not in use, is slower than shadow or hardware
assisted paging, and a maintenance burden. It's November 2011, time to
remove it.
Signed-off-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The vcpu reference of a kvm_timer can't become NULL while the timer is
valid, so drop this redundant test. This also makes it pointless to
carry a separate __kvm_timer_fn, fold it into kvm_timer_fn.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Detecting write-flooding does not work well, when we handle page written, if
the last speculative spte is not accessed, we treat the page is
write-flooding, however, we can speculative spte on many path, such as pte
prefetch, page synced, that means the last speculative spte may be not point
to the written page and the written page can be accessed via other sptes, so
depends on the Accessed bit of the last speculative spte is not enough
Instead of detected page accessed, we can detect whether the spte is accessed
after it is written, if the spte is not accessed but it is written frequently,
we treat is not a page table or it not used for a long time
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Sometimes, we only modify the last one byte of a pte to update status bit,
for example, clear_bit is used to clear r/w bit in linux kernel and 'andb'
instruction is used in this function, in this case, kvm_mmu_pte_write will
treat it as misaligned access, and the shadow page table is zapped
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_mmu_pte_write is too long, we split it for better readable
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In kvm_mmu_pte_write, we do not need to alloc shadow page, so calling
kvm_mmu_free_some_pages is really unnecessary
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Fast prefetch spte for the unsync shadow page on invlpg path
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Directly Use mmu_page_zap_pte to zap spte in FNAME(invlpg), also remove the
same code between FNAME(invlpg) and FNAME(sync_page)
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In current code, the accessed bit is always set when page fault occurred,
do not need to set it on pte write path
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Remove the same code between emulator_pio_in_emulated and
emulator_pio_out_emulated
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the emulation is caused by #PF and it is non-page_table writing instruction,
it means the VM-EXIT is caused by shadow page protected, we can zap the shadow
page and retry this instruction directly
The idea is from Avi
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The idea is from Avi:
| tag instructions that are typically used to modify the page tables, and
| drop shadow if any other instruction is used.
| The list would include, I'd guess, and, or, bts, btc, mov, xchg, cmpxchg,
| and cmpxchg8b.
This patch is used to tag the instructions and in the later path, shadow page
is dropped if it is written by other instructions
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_mmu_pte_write is unsafe since we need to alloc pte_list_desc in the
function when spte is prefetched, unfortunately, we can not know how many
spte need to be prefetched on this path, that means we can use out of the
free pte_list_desc object in the cache, and BUG_ON() is triggered, also some
path does not fill the cache, such as INS instruction emulated that does not
trigger page fault
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When L0 wishes to inject an interrupt while L2 is running, it emulates an exit
to L1 with EXIT_REASON_EXTERNAL_INTERRUPT. This was explained in the original
nVMX patch 23, titled "Correct handling of interrupt injection".
Unfortunately, it is possible (though rare) that at this point there is valid
idt_vectoring_info in vmcs02. For example, L1 injected some interrupt to L2,
and when L2 tried to run this interrupt's handler, it got a page fault - so
it returns the original interrupt vector in idt_vectoring_info. The problem
is that if this is the case, we cannot exit to L1 with EXTERNAL_INTERRUPT
like we wished to, because the VMX spec guarantees that idt_vectoring_info
and exit_reason_external_interrupt can never happen together. This is not
just specified in the spec - a KVM L1 actually prints a kernel warning
"unexpected, valid vectoring info" if we violate this guarantee, and some
users noticed these warnings in L1's logs.
In order to better emulate a processor, which would never return the external
interrupt and the idt-vectoring-info together, we need to separate the two
injection steps: First, complete L1's injection into L2 (i.e., enter L2,
injecting to it the idt-vectoring-info); Second, after entry into L2 succeeds
and it exits back to L0, exit to L1 with the EXIT_REASON_EXTERNAL_INTERRUPT.
Most of this is already in the code - the only change we need is to remain
in L2 (and not exit to L1) in this case.
Note that the previous patch ensures (by using KVM_REQ_IMMEDIATE_EXIT) that
although we do enter L2 first, it will exit immediately after processing its
injection, allowing us to promptly inject to L1.
Note how we test vmcs12->idt_vectoring_info_field; This isn't really the
vmcs12 value (we haven't exited to L1 yet, so vmcs12 hasn't been updated),
but rather the place we save, at the end of vmx_vcpu_run, the vmcs02 value
of this field. This was explained in patch 25 ("Correct handling of idt
vectoring info") of the original nVMX patch series.
Thanks to Dave Allan and to Federico Simoncelli for reporting this bug,
to Abel Gordon for helping me figure out the solution, and to Avi Kivity
for helping to improve it.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch adds a new vcpu->requests bit, KVM_REQ_IMMEDIATE_EXIT.
This bit requests that when next entering the guest, we should run it only
for as little as possible, and exit again.
We use this new option in nested VMX: When L1 launches L2, but L0 wishes L1
to continue running so it can inject an event to it, we unfortunately cannot
just pretend to have run L2 for a little while - We must really launch L2,
otherwise certain one-off vmcs12 parameters (namely, L1 injection into L2)
will be lost. So the existing code runs L2 in this case.
But L2 could potentially run for a long time until it exits, and the
injection into L1 will be delayed. The new KVM_REQ_IMMEDIATE_EXIT allows us
to request that L2 will be entered, as necessary, but will exit as soon as
possible after entry.
Our implementation of this request uses smp_send_reschedule() to send a
self-IPI, with interrupts disabled. The interrupts remain disabled until the
guest is entered, and then, after the entry is complete (often including
processing an injection and jumping to the relevant handler), the physical
interrupt is noticed and causes an exit.
On recent Intel processors, we could have achieved the same goal by using
MTF instead of a self-IPI. Another technique worth considering in the future
is to use VM_EXIT_ACK_INTR_ON_EXIT and a highest-priority vector IPI - to
slightly improve performance by avoiding the useless interrupt handler
which ends up being called when smp_send_reschedule() is used.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Unlike all of the other cpuid bits, the TSC deadline timer bit is set
unconditionally, regardless of what userspace wants.
This is broken in several ways:
- if userspace doesn't use KVM_CREATE_IRQCHIP, and doesn't emulate the TSC
deadline timer feature, a guest that uses the feature will break
- live migration to older host kernels that don't support the TSC deadline
timer will cause the feature to be pulled from under the guest's feet;
breaking it
- guests that are broken wrt the feature will fail.
Fix by not enabling the feature automatically; instead report it to userspace.
Because the feature depends on KVM_CREATE_IRQCHIP, which we cannot guarantee
will be called, we expose it via a KVM_CAP_TSC_DEADLINE_TIMER and not
KVM_GET_SUPPORTED_CPUID.
Fixes the Illumos guest kernel, which uses the TSC deadline timer feature.
[avi: add the KVM_CAP + documentation]
Reported-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Tested-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
User space may create the PIT and forgets about setting up the irqchips.
In that case, firing PIT IRQs will crash the host:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000128
IP: [<ffffffffa10f6280>] kvm_set_irq+0x30/0x170 [kvm]
...
Call Trace:
[<ffffffffa11228c1>] pit_do_work+0x51/0xd0 [kvm]
[<ffffffff81071431>] process_one_work+0x111/0x4d0
[<ffffffff81071bb2>] worker_thread+0x152/0x340
[<ffffffff81075c8e>] kthread+0x7e/0x90
[<ffffffff815a4474>] kernel_thread_helper+0x4/0x10
Prevent this by checking the irqchip mode before starting a timer. We
can't deny creating the PIT if the irqchips aren't set up yet as
current user land expects this order to work.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Support guest/host-only profiling by switch perf msrs on
a guest entry if needed.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Some cpus have special support for switching PERF_GLOBAL_CTRL msr.
Add logic to detect if such support exists and works properly and extend
msr switching code to use it if available. Also extend number of generic
msr switching entries to 8.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (33 commits)
iommu/core: Remove global iommu_ops and register_iommu
iommu/msm: Use bus_set_iommu instead of register_iommu
iommu/omap: Use bus_set_iommu instead of register_iommu
iommu/vt-d: Use bus_set_iommu instead of register_iommu
iommu/amd: Use bus_set_iommu instead of register_iommu
iommu/core: Use bus->iommu_ops in the iommu-api
iommu/core: Convert iommu_found to iommu_present
iommu/core: Add bus_type parameter to iommu_domain_alloc
Driver core: Add iommu_ops to bus_type
iommu/core: Define iommu_ops and register_iommu only with CONFIG_IOMMU_API
iommu/amd: Fix wrong shift direction
iommu/omap: always provide iommu debug code
iommu/core: let drivers know if an iommu fault handler isn't installed
iommu/core: export iommu_set_fault_handler()
iommu/omap: Fix build error with !IOMMU_SUPPORT
iommu/omap: Migrate to the generic fault report mechanism
iommu/core: Add fault reporting mechanism
iommu/core: Use PAGE_SIZE instead of hard-coded value
iommu/core: use the existing IS_ALIGNED macro
iommu/msm: ->unmap() should return order of unmapped page
...
Fixup trivial conflicts in drivers/iommu/Makefile: "move omap iommu to
dedicated iommu folder" vs "Rename the DMAR and INTR_REMAP config
options" just happened to touch lines next to each other.
AMD processors apparently have a bug in the hardware task switching
support when NPT is enabled. If the task switch triggers a NPF, we can
get wrong EXITINTINFO along with that fault. On resume, spurious
exceptions may then be injected into the guest.
We were able to reproduce this bug when our guest triggered #SS and the
handler were supposed to run over a separate task with not yet touched
stack pages.
Work around the issue by continuing to emulate task switches even in
NPT mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
With per-bus iommu_ops the iommu_found function needs to
work on a bus_type too. This patch adds a bus_type parameter
to that function and converts all call-places.
The function is also renamed to iommu_present because the
function now checks if an iommu is present for a given bus
and does not check for a global iommu anymore.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
If simultaneous NMIs happen, we're supposed to queue the second
and next (collapsing them), but currently we sometimes collapse
the second into the first.
Fix by using a counter for pending NMIs instead of a bool; since
the counter limit depends on whether the processor is currently
in an NMI handler, which can only be checked in vcpu context
(via the NMI mask), we add a new KVM_REQ_NMI to request recalculation
of the counter.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The opcodes
push %seg
pop %seg
l%seg, %mem, %reg (e.g. lds/les/lss/lfs/lgs)
all have an segment register encoded in the instruction. To allow reuse,
decode the segment number into src2 during the decode stage instead of the
execution stage.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Use the same technique as the other OpMem variants, and goto mem_common.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
OpReg decoding has a hack that inhibits byte registers for movsx and movzx
instructions. It should be replaced by something better, but meanwhile,
qualify that the hack is only active for the destination operand.
Note these instructions only use OpReg for the destination, but better to
be explicit about it.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Op fields are going to grow by a bit, we need two free bits.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Unifiying the operands means not taking advantage of the fact that some
operand types can only go into certain operands (for example, DI can only
be used by the destination), so we need more bits to hold the operand type.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of decoding each operand using its own code, use a generic
function. Start with the destination operand.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Certain guests, specifically RTOSes, request faster periodic timers than
what we allow by default. Add a module parameter to adjust the limit for
non-standard setups. Also add a rate-limited warning in case the guest
requested more.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The use of printk_ratelimit is discouraged, replace it with
pr*_ratelimited or __ratelimit. While at it, convert remaining
guest-triggerable printks to rate-limited variants.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Convert remaining printks that the guest can trigger to apic_printk.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This avoids that events causing the vmexit are recorded before the
actual exit reason.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The TEST instruction doesn't write its destination operand. This
could cause problems if an MMIO register was accessed using the TEST
instruction. Recently Windows XP was observed to use TEST against
the APIC ICR; this can cause spurious IPIs.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
emulate_1op_rax_rdx() is always called with the same parameters. Simplify
by passing just the emulation context.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We have two emulate-with-extended-accumulator implementations: once
which expect traps (_ex) and one which doesn't (plain). Drop the
plain implementation and always use the one which expects traps;
it will simply return 0 in the _ex argument and we can happily ignore
it.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
emulate_1op() is always called with the same parameters. Simplify
by passing just the emulation context.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
emulate_2op_cl() is always called with the same parameters. Simplify
by passing just the emulation context.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
emulate_2op_cl() is always called with the same parameters. Simplify
by passing just the emulation context.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
emulate_2op_SrcV(), and its siblings, emulate_2op_SrcV_nobyte()
and emulate_2op_SrcB(), all use the same calling conventions
and all get passed exactly the same parameters. Simplify them
by passing just the emulation context.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instruction emulation for EOI writes can be skipped, since sane
guest simply uses MOV instead of string operations. This is a nice
improvement when guest doesn't support x2apic or hyper-V EOI
support.
a single VM bandwidth is observed with ~8% bandwidth improvement
(7.4Gbps->8Gbps), by saving ~5% cycles from EOI emulation.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
<Based on earlier work from>:
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When the TSC MSR is read by an L2 guest (when L1 allowed this MSR to be
read without exit), we need to return L2's notion of the TSC, not L1's.
The current code incorrectly returned L1 TSC, because svm_get_msr() was also
used in x86.c where this was assumed, but now that these places call the new
svm_read_l1_tsc(), the MSR read can be fixed.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Tested-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch fixes two corner cases in nested (L2) handling of TSC-related
issues:
1. Somewhat suprisingly, according to the Intel spec, if L1 allows WRMSR to
the TSC MSR without an exit, then this should set L1's TSC value itself - not
offset by vmcs12.TSC_OFFSET (like was wrongly done in the previous code).
2. Allow L1 to disable the TSC_OFFSETING control, and then correctly ignore
the vmcs12.TSC_OFFSET.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
KVM assumed in several places that reading the TSC MSR returns the value for
L1. This is incorrect, because when L2 is running, the correct TSC read exit
emulation is to return L2's value.
We therefore add a new x86_ops function, read_l1_tsc, to use in places that
specifically need to read the L1 TSC, NOT the TSC of the current level of
guest.
Note that one change, of one line in kvm_arch_vcpu_load, is made redundant
by a different patch sent by Zachary Amsden (and not yet applied):
kvm_arch_vcpu_load() should not read the guest TSC, and if it didn't, of
course we didn't have to change the call of kvm_get_msr() to read_l1_tsc().
[avi: moved callback to kvm_x86_ops tsc block]
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Acked-by: Zachary Amsdem <zamsden@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch fix kvm-unit-tests hanging and incorrect PT_ACCESSED_MASK
bit set in the case of SMEP fault. The code updated 'eperm' after
the variable was checked.
Signed-off-by: Yang, Wei <wei.y.yang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Architecturally, PDPTEs are cached in the PDPTRs when CR3 is reloaded.
On SVM, it is not possible to implement this, but on VMX this is possible
and was indeed implemented until nested SVM changed this to unconditionally
read PDPTEs dynamically. This has noticable impact when running PAE guests.
Fix by changing the MMU to read PDPTRs from the cache, falling back to
reading from memory for the nested MMU.
Signed-off-by: Avi Kivity <avi@redhat.com>
Tested-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Use BUG_ON(x) rather than if(x) BUG();
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@ identifier x; @@
-if (x) BUG();
+BUG_ON(x);
@@ identifier x; @@
-if (!x) BUG();
+BUG_ON(!x);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Windows Server 2008 SP2 checked build with smp > 1 BSOD's during
boot due to lack of microcode update:
*** Assertion failed: The system BIOS on this machine does not properly
support the processor. The system BIOS did not load any microcode update.
A BIOS containing the latest microcode update is needed for system reliability.
(CurrentUpdateRevision != 0)
*** Source File: d:\longhorn\base\hals\update\intelupd\update.c, line 440
Report a non-zero microcode update signature to make it happy.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Return EMULATION_OK/FAILED consistently. Also treat instruction fetch
errors, not restricted to X86EMUL_UNHANDLEABLE, as EMULATION_FAILED;
although this cannot happen in practice, the current logic will continue
the emulation even if the decoder fails to fetch the instruction.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Fetching the instruction which was to be executed by the guest cannot
fail normally. So compiler should always predict that it will succeed.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of passing ctxt->_eip from insn_fetch() call sites, get it from
ctxt in do_insn_fetch_byte(). This is done by replacing the argument
_eip of insn_fetch() with _ctxt, which should be better than letting the
macro use ctxt silently in its body.
Though this changes the place where ctxt->_eip is incremented from
insn_fetch() to do_insn_fetch_byte(), this does not have any real
effect.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently the method of dealing with an IO operation on a bus (PIO/MMIO)
is to call the read or write callback for each device registered
on the bus until we find a device which handles it.
Since the number of devices on a bus can be significant due to ioeventfds
and coalesced MMIO zones, this leads to a lot of overhead on each IO
operation.
Instead of registering devices, we now register ranges which points to
a device. Lookup is done using an efficient bsearch instead of a linear
search.
Performance test was conducted by comparing exit count per second with
200 ioeventfds created on one byte and the guest is trying to access a
different byte continuously (triggering usermode exits).
Before the patch the guest has achieved 259k exits per second, after the
patch the guest does 274k exits per second.
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The vmexit tracepoints format the exit_reason to make it human-readable.
Since the exit_reason depends on the instruction set (vmx or svm),
formatting is handled with ftrace_print_symbols_seq() by referring to
the appropriate exit reason table.
However, the ftrace_print_symbols_seq() function is not meant to be used
directly in tracepoints since it does not export the formatting table
which userspace tools like trace-cmd and perf use to format traces.
In practice perf dies when formatting vmexit-related events and
trace-cmd falls back to printing the numeric value (with extra
formatting code in the kvm plugin to paper over this limitation). Other
userspace consumers of vmexit-related tracepoints would be in similar
trouble.
To avoid significant changes to the kvm_exit tracepoint, this patch
moves the vmx and svm exit reason tables into arch/x86/kvm/trace.h and
selects the right table with __print_symbolic() depending on the
instruction set. Note that __print_symbolic() is designed for exporting
the formatting table to userspace and allows trace-cmd and perf to work.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The kvm_exit tracepoint recently added the isa argument to aid decoding
exit_reason. The semantics of exit_reason depend on the instruction set
(vmx or svm) and the isa argument allows traces to be analyzed on other
machines.
Add the isa argument to kvm_nested_vmexit and kvm_nested_vmexit_inject
so these tracepoints can also be self-describing.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit 0945d4b228 tried to fix the get_msr path for the
HV_X64_MSR_APIC_ASSIST_PAGE msr, but was poorly tested. We should be
returning 0 if the read succeeded, and passing the value back to the
caller via the pdata out argument, not returning the value directly.
Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
"get" support for the HV_X64_MSR_APIC_ASSIST_PAGE msr was missing, even
though it is explicitly enumerated as something the vmm should save in
msrs_to_save and reported to userland via the KVM_GET_MSR_INDEX_LIST
ioctl.
Add "get" support for HV_X64_MSR_APIC_ASSIST_PAGE. We simply return the
guest visible value of this register, which seems to be correct as a set
on the register is validated for us already.
Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The patch raises the hard limit of VCPU count to 254.
This will allow developers to easily work on scalability
and will allow users to test high VCPU setups easily without
patching the kernel.
To prevent possible issues with current setups, KVM_CAP_NR_VCPUS
now returns the recommended VCPU limit (which is still 64) - this
should be a safe value for everybody, while a new KVM_CAP_MAX_VCPUS
returns the hard limit which is now 254.
Cc: Avi Kivity <avi@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Suggested-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Using the read/write operation to remove the same code
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The operations of read emulation and write emulation are very similar, so we
can abstract the operation of them, in larter patch, it is used to cleanup the
same code
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the range spans a page boundary, the mmio access can be broke, fix it as
write emulation.
And we already get the guest physical address, so use it to read guest data
directly to avoid walking guest page table again
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Src2CL decode (used for double width shifts) erronously decodes only bit 3
of %rcx, instead of bits 7:0.
Fix by decoding %cl in its entirety.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
__update_clear_spte_slow should return original spte while the
current code returns low half of original spte combined with high
half of new spte.
Signed-off-by: Zhao Jin <cronozhj@gmail.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CONFIG_TASKSTATS just had a change to use netlink, including
a change to "depends on NET". Since "select" does not follow
dependencies, KVM also needs to depend on NET to prevent build
errors when CONFIG_NET is not enabled.
Sample of the reported "undefined reference" build errors:
taskstats.c:(.text+0x8f686): undefined reference to `nla_put'
taskstats.c:(.text+0x8f721): undefined reference to `nla_reserve'
taskstats.c:(.text+0x8f8fb): undefined reference to `init_net'
taskstats.c:(.text+0x8f905): undefined reference to `netlink_unicast'
taskstats.c:(.text+0x8f934): undefined reference to `kfree_skb'
taskstats.c:(.text+0x8f9e9): undefined reference to `skb_clone'
taskstats.c:(.text+0x90060): undefined reference to `__alloc_skb'
taskstats.c:(.text+0x901e9): undefined reference to `skb_put'
taskstats.c:(.init.text+0x4665): undefined reference to `genl_register_family'
taskstats.c:(.init.text+0x4699): undefined reference to `genl_register_ops'
taskstats.c:(.init.text+0x4710): undefined reference to `genl_unregister_ops'
taskstats.c:(.init.text+0x471c): undefined reference to `genl_unregister_family'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Fix kconfig dependency warning:
warning: (KVM) selects TASK_DELAY_ACCT which has unmet direct dependencies (TASKSTATS)
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
fs: Merge split strings
treewide: fix potentially dangerous trailing ';' in #defined values/expressions
uwb: Fix misspelling of neighbourhood in comment
net, netfilter: Remove redundant goto in ebt_ulog_packet
trivial: don't touch files that are removed in the staging tree
lib/vsprintf: replace link to Draft by final RFC number
doc: Kconfig: `to be' -> `be'
doc: Kconfig: Typo: square -> squared
doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
drivers/net: static should be at beginning of declaration
drivers/media: static should be at beginning of declaration
drivers/i2c: static should be at beginning of declaration
XTENSA: static should be at beginning of declaration
SH: static should be at beginning of declaration
MIPS: static should be at beginning of declaration
ARM: static should be at beginning of declaration
rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
Update my e-mail address
PCIe ASPM: forcedly -> forcibly
gma500: push through device driver tree
...
Fix up trivial conflicts:
- arch/arm/mach-ep93xx/dma-m2p.c (deleted)
- drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
- drivers/net/r8169.c (just context changes)
The idea is from Avi:
| We could cache the result of a miss in an spte by using a reserved bit, and
| checking the page fault error code (or seeing if we get an ept violation or
| ept misconfiguration), so if we get repeated mmio on a page, we don't need to
| search the slot list/tree.
| (https://lkml.org/lkml/2011/2/22/221)
When the page fault is caused by mmio, we cache the info in the shadow page
table, and also set the reserved bits in the shadow page table, so if the mmio
is caused again, we can quickly identify it and emulate it directly
Searching mmio gfn in memslots is heavy since we need to walk all memeslots, it
can be reduced by this feature, and also avoid walking guest page table for
soft mmu.
[jan: fix operator precedence issue]
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Use rcu to protect shadow pages table to be freed, so we can safely walk it,
it should run fastly and is needed by mmio page fault
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Now, the spte is just from nonprsent to present or present to nonprsent, so
we can use some trick to set/clear spte non-atomicly as linux kernel does
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduce some interfaces to modify spte as linux kernel does:
- mmu_spte_clear_track_bits, it set the spte from present to nonpresent, and
track the stat bits(accessed/dirty) of spte
- mmu_spte_clear_no_track, the same as mmu_spte_clear_track_bits except
tracking the stat bits
- mmu_spte_set, set spte from nonpresent to present
- mmu_spte_update, only update the stat bits
Now, it does not allowed to set spte from present to present, later, we can
drop the atomicly opration for X86_32 host, and it is the preparing work to
get spte on X86_32 host out of the mmu lock
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduce handle_abnormal_pfn to handle fault pfn on page fault path,
introduce mmu_invalid_pfn to handle fault pfn on prefetch path
It is the preparing work for mmio page fault support
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the page fault is caused by mmio, the gfn can not be found in memslots, and
'bad_pfn' is returned on gfn_to_hva path, so we can use 'bad_pfn' to identify
the mmio page fault.
And, to clarify the meaning of mmio pfn, we return fault page instead of bad
page when the gfn is not allowd to prefetch
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The idea is from Avi:
| Maybe it's time to kill off bypass_guest_pf=1. It's not as effective as
| it used to be, since unsync pages always use shadow_trap_nonpresent_pte,
| and since we convert between the two nonpresent_ptes during sync and unsync.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Split kvm_mmu_free_page to kvm_mmu_isolate_page and
kvm_mmu_free_page
One is used to remove the page from cache under mmu lock and the other is
used to free page table out of mmu lock
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Move counting used shadow pages from commiting path to preparing path to
reduce tlb flush on some paths
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If 'pt_write' is true, we need to emulate the fault. And in later patch, we
need to emulate the fault even though it is not a pt_write event, so rename
it to better fit the meaning
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
gw->pte_access is the final access permission, since it is unified with
gw->pt_access when we walked guest page table:
FNAME(walk_addr_generic):
pte_access = pt_access & FNAME(gpte_access)(vcpu, pte, true);
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If dirty bit is not set, we can make the pte access read-only to avoid handing
dirty bit everywhere
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
If the page fault is caused by mmio, we can cache the mmio info, later, we do
not need to walk guest page table and quickly know it is a mmio fault while we
emulate the mmio instruction
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduce vcpu_mmio_gva_to_gpa to translate the gva to gpa, we can use it
to cleanup the code between read emulation and write emulation
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Properly check the last mapping, and do not walk to the next level if last spte
is met
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
virtio has been so far used only in the context of virtualization,
and the virtio Kconfig was sourced directly by the relevant arch
Kconfigs when VIRTUALIZATION was selected.
Now that we start using virtio for inter-processor communications,
we need to source the virtio Kconfig outside of the virtualization
scope too.
Moreover, some architectures might use virtio for both virtualization
and inter-processor communications, so directly sourcing virtio
might yield unexpected results due to conflicting selections.
The simple solution offered by this patch is to always source virtio's
Kconfig in drivers/Kconfig, and remove it from the appropriate arch
Kconfigs. Additionally, a virtio menu entry has been added so virtio
drivers don't show up in the general drivers menu.
This way anyone can use virtio, though it's arguably less accessible
(and neat!) for virtualization users now.
Note: some architectures (mips and sh) seem to have a VIRTUALIZATION
menu merely for sourcing virtio's Kconfig, so that menu is removed too.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To implement steal time, we need the hypervisor to pass the guest
information about how much time was spent running other processes
outside the VM, while the vcpu had meaningful work to do - halt
time does not count.
This information is acquired through the run_delay field of
delayacct/schedstats infrastructure, that counts time spent in a
runqueue but not running.
Steal time is a per-cpu information, so the traditional MSR-based
infrastructure is used. A new msr, KVM_MSR_STEAL_TIME, holds the
memory area address containing information about steal time
This patch contains the hypervisor part of the steal time infrasructure,
and can be backported independently of the guest portion.
[avi, yongjie: export delayacct_on, to avoid build failures in some configs]
Signed-off-by: Glauber Costa <glommer@redhat.com>
Tested-by: Eric B Munson <emunson@mgebm.net>
CC: Rik van Riel <riel@redhat.com>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Yongjie Ren <yongjie.ren@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The current name does not explain the meaning well. So give it a better
name "retry_walk" to show that we are trying the walk again.
This was suggested by Ingo Molnar.
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Avoid two step jump to the error handling part. This eliminates the use
of the variables present and rsvd_fault.
We also use the const type qualifier to show that write/user/fetch_fault
do not change in the function.
Both of these were suggested by Ingo Molnar.
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This reverts commit bee931d31e588b8eb86b7edee32fac2d16930cd7.
TLB flush should be done lazily during guest entry, in
kvm_mmu_load().
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
kvm_set_cr0() and kvm_set_cr4(), and possible other functions,
assume that kvm_mmu_reset_context() flushes the guest TLB. However,
it does not.
Fix by flushing the tlb (and syncing the new root as well).
Signed-off-by: Avi Kivity <avi@redhat.com>
When CR0.WP=0, we sometimes map user pages as kernel pages (to allow
the kernel to write to them). Unfortunately this also allows the kernel
to fetch from these pages, even if CR4.SMEP is set.
Adjust for this by also setting NX on the spte in these circumstances.
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch exposes ERMS feature to KVM guests.
The REP MOVSB/STOSB instruction can enhance fast strings attempts to
move as much of the data with larger size load/stores as possible.
Signed-off-by: Yang, Wei <wei.y.yang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch exposes DRNG feature to KVM guests.
The RDRAND instruction can provide software with sequences of
random numbers generated from white noise.
Signed-off-by: Yang, Wei <wei.y.yang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
commit 123108f1c1aafd51d6a5c79cc04d7999dd88a930 tried to fix KVMs
XSAVE valid feature scanning, but it was wrong. It was not considering
the sparse nature of this bitfield, instead reading values from
uninitialized members of the entries array.
This patch now separates subleaf indicies from KVM's array indicies
and fills the entry before querying it's value.
This fixes AVX support in KVM guests.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The nested VMX feature is supposed to fully emulate VMX for the guest. This
(theoretically) not only allows it to run its own guests, but also also
to further emulate VMX for its own guests, and allow arbitrarily deep nesting.
This patch fixes a bug (discovered by Kevin Tian) in handling a VMLAUNCH
by L2, which prevented deeper nesting.
Deeper nesting now works (I only actually tested L3), but is currently
*absurdly* slow, to the point of being unusable.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This saves a lot of pointless casts x86_emulate_ctxt and decode_cache.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The name eip conflicts with a field of the same name in x86_emulate_ctxt,
which we plan to fold decode_cache into.
The name _eip is unfortunate, but what's really needed is a refactoring
here, not a better name.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Different functions for those which take segment register operands.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In addition, replace one "goto xchg" with an em_xchg() call.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The next patch will change these to be called by opcode::execute.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We should use the local variables ctxt and c when the emulate_ctxt and
decode appears many times. At least, we need to be consistent about
how we use these in a function.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Small corrections of KVM (spelling, etc.) not directly related to nested VMX.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If the "nested" module option is enabled, add the "VMX" CPU feature to the
list of CPU features KVM advertises with the KVM_GET_SUPPORTED_CPUID ioctl.
Qemu uses this ioctl, and intersects KVM's list with its own list of desired
cpu features (depending on the -cpu option given to qemu) to determine the
final list of features presented to the guest.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In the unlikely case that L1 does not capture MSR_IA32_TSC, L0 needs to
emulate this MSR write by L2 by modifying vmcs02.tsc_offset. We also need to
set vmcs12.tsc_offset, for this change to survive the next nested entry (see
prepare_vmcs02()).
Additionally, we also need to modify vmx_adjust_tsc_offset: The semantics
of this function is that the TSC of all guests on this vcpu, L1 and possibly
several L2s, need to be adjusted. To do this, we need to adjust vmcs01's
tsc_offset (this offset will also apply to each L2s we enter). We can't set
vmcs01 now, so we have to remember this adjustment and apply it when we
later exit to L1.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM's "Lazy FPU loading" means that sometimes L0 needs to set CR0.TS, even
if a guest didn't set it. Moreover, L0 must also trap CR0.TS changes and
NM exceptions, even if we have a guest hypervisor (L1) who didn't want these
traps. And of course, conversely: If L1 wanted to trap these events, we
must let it, even if L0 is not interested in them.
This patch fixes some existing KVM code (in update_exception_bitmap(),
vmx_fpu_activate(), vmx_fpu_deactivate()) to do the correct merging of L0's
and L1's needs. Note that handle_cr() was already fixed in the above patch,
and that new code in introduced in previous patches already handles CR0
correctly (see prepare_vmcs02(), prepare_vmcs12(), and nested_vmx_vmexit()).
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When L2 tries to modify CR0 or CR4 (with mov or clts), and modifies a bit
which L1 asked to shadow (via CR[04]_GUEST_HOST_MASK), we already do the right
thing: we let L1 handle the trap (see nested_vmx_exit_handled_cr() in a
previous patch).
When L2 modifies bits that L1 doesn't care about, we let it think (via
CR[04]_READ_SHADOW) that it did these modifications, while only changing
(in GUEST_CR[04]) the bits that L0 doesn't shadow.
This is needed for corect handling of CR0.TS for lazy FPU loading: L0 may
want to leave TS on, while pretending to allow the guest to change it.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch adds correct handling of IDT_VECTORING_INFO_FIELD for the nested
case.
When a guest exits while delivering an interrupt or exception, we get this
information in IDT_VECTORING_INFO_FIELD in the VMCS. When L2 exits to L1,
there's nothing we need to do, because L1 will see this field in vmcs12, and
handle it itself. However, when L2 exits and L0 handles the exit itself and
plans to return to L2, L0 must inject this event to L2.
In the normal non-nested case, the idt_vectoring_info case is discovered after
the exit, and the decision to inject (though not the injection itself) is made
at that point. However, in the nested case a decision of whether to return
to L2 or L1 also happens during the injection phase (see the previous
patches), so in the nested case we can only decide what to do about the
idt_vectoring_info right after the injection, i.e., in the beginning of
vmx_vcpu_run, which is the first time we know for sure if we're staying in
L2.
Therefore, when we exit L2 (is_guest_mode(vcpu)), we disable the regular
vmx_complete_interrupts() code which queues the idt_vectoring_info for
injection on next entry - because such injection would not be appropriate
if we will decide to exit to L1. Rather, we just save the idt_vectoring_info
and related fields in vmcs12 (which is a convenient place to save these
fields). On the next entry in vmx_vcpu_run (*after* the injection phase,
potentially exiting to L1 to inject an event requested by user space), if
we find ourselves in L1 we don't need to do anything with those values
we saved (as explained above). But if we find that we're in L2, or rather
*still* at L2 (it's not nested_run_pending, meaning that this is the first
round of L2 running after L1 having just launched it), we need to inject
the event saved in those fields - by writing the appropriate VMCS fields.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Similar to the previous patch, but concerning injection of exceptions rather
than external interrupts.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The code in this patch correctly emulates external-interrupt injection
while a nested guest L2 is running.
Because of this code's relative un-obviousness, I include here a longer-than-
usual justification for what it does - much longer than the code itself ;-)
To understand how to correctly emulate interrupt injection while L2 is
running, let's look first at what we need to emulate: How would things look
like if the extra L0 hypervisor layer is removed, and instead of L0 injecting
an interrupt, we had hardware delivering an interrupt?
Now we have L1 running on bare metal with a guest L2, and the hardware
generates an interrupt. Assuming that L1 set PIN_BASED_EXT_INTR_MASK to 1, and
VM_EXIT_ACK_INTR_ON_EXIT to 0 (we'll revisit these assumptions below), what
happens now is this: The processor exits from L2 to L1, with an external-
interrupt exit reason but without an interrupt vector. L1 runs, with
interrupts disabled, and it doesn't yet know what the interrupt was. Soon
after, it enables interrupts and only at that moment, it gets the interrupt
from the processor. when L1 is KVM, Linux handles this interrupt.
Now we need exactly the same thing to happen when that L1->L2 system runs
on top of L0, instead of real hardware. This is how we do this:
When L0 wants to inject an interrupt, it needs to exit from L2 to L1, with
external-interrupt exit reason (with an invalid interrupt vector), and run L1.
Just like in the bare metal case, it likely can't deliver the interrupt to
L1 now because L1 is running with interrupts disabled, in which case it turns
on the interrupt window when running L1 after the exit. L1 will soon enable
interrupts, and at that point L0 will gain control again and inject the
interrupt to L1.
Finally, there is an extra complication in the code: when nested_run_pending,
we cannot return to L1 now, and must launch L2. We need to remember the
interrupt we wanted to inject (and not clear it now), and do it on the
next exit.
The above explanation shows that the relative strangeness of the nested
interrupt injection code in this patch, and the extra interrupt-window
exit incurred, are in fact necessary for accurate emulation, and are not
just an unoptimized implementation.
Let's revisit now the two assumptions made above:
If L1 turns off PIN_BASED_EXT_INTR_MASK (no hypervisor that I know
does, by the way), things are simple: L0 may inject the interrupt directly
to the L2 guest - using the normal code path that injects to any guest.
We support this case in the code below.
If L1 turns on VM_EXIT_ACK_INTR_ON_EXIT, things look very different from the
description above: L1 expects to see an exit from L2 with the interrupt vector
already filled in the exit information, and does not expect to be interrupted
again with this interrupt. The current code does not (yet) support this case,
so we do not allow the VM_EXIT_ACK_INTR_ON_EXIT exit-control to be turned on
by L1.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch contains the logic of whether an L2 exit should be handled by L0
and then L2 should be resumed, or whether L1 should be run to handle this
exit (using the nested_vmx_vmexit() function of the previous patch).
The basic idea is to let L1 handle the exit only if it actually asked to
trap this sort of event. For example, when L2 exits on a change to CR0,
we check L1's CR0_GUEST_HOST_MASK to see if L1 expressed interest in any
bit which changed; If it did, we exit to L1. But if it didn't it means that
it is we (L0) that wished to trap this event, so we handle it ourselves.
The next two patches add additional logic of what to do when an interrupt or
exception is injected: Does L0 need to do it, should we exit to L1 to do it,
or should we resume L2 and keep the exception to be injected later.
We keep a new flag, "nested_run_pending", which can override the decision of
which should run next, L1 or L2. nested_run_pending=1 means that we *must* run
L2 next, not L1. This is necessary in particular when L1 did a VMLAUNCH of L2
and therefore expects L2 to be run (and perhaps be injected with an event it
specified, etc.). Nested_run_pending is especially intended to avoid switching
to L1 in the injection decision-point described above.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch adds a bunch of tests of the validity of the vmcs12 fields,
according to what the VMX spec and our implementation allows. If fields
we cannot (or don't want to) honor are discovered, an entry failure is
emulated.
According to the spec, there are two types of entry failures: If the problem
was in vmcs12's host state or control fields, the VMLAUNCH instruction simply
fails. But a problem is found in the guest state, the behavior is more
similar to that of an exit.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch implements nested_vmx_vmexit(), called when the nested L2 guest
exits and we want to run its L1 parent and let it handle this exit.
Note that this will not necessarily be called on every L2 exit. L0 may decide
to handle a particular exit on its own, without L1's involvement; In that
case, L0 will handle the exit, and resume running L2, without running L1 and
without calling nested_vmx_vmexit(). The logic for deciding whether to handle
a particular exit in L1 or in L0, i.e., whether to call nested_vmx_vmexit(),
will appear in a separate patch below.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Before nested VMX support, the exit handler for a guest executing a VMX
instruction (vmclear, vmlaunch, vmptrld, vmptrst, vmread, vmread, vmresume,
vmwrite, vmon, vmoff), was handle_vmx_insn(). This handler simply threw a #UD
exception. Now that all these exit reasons are properly handled (and emulate
the respective VMX instruction), nothing calls this dummy handler and it can
be removed.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Implement the VMLAUNCH and VMRESUME instructions, allowing a guest
hypervisor to run its own guests.
This patch does not include some of the necessary validity checks on
vmcs12 fields before the entry. These will appear in a separate patch
below.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch contains code to prepare the VMCS which can be used to actually
run the L2 guest, vmcs02. prepare_vmcs02 appropriately merges the information
in vmcs12 (the vmcs that L1 built for L2) and in vmcs01 (our desires for our
own guests).
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Move some of the control field setup to common functions. These functions will
also be needed for running L2 guests - L0's desires (expressed in these
functions) will be appropriately merged with L1's desires.
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Takuya Yoshikawa