We don't want to enable learning for the ASP port since it only receives
directed traffic, this allows us to bypass ARL-driven forwarding rules
which could conflict with Broadcom tags and/or CFP forwarding.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On 7278, port 7 connects to the ASP which should only receive frames
through the use of CFP rules, it is not desirable to have it be part of
a bridge at all since that would make it pick up unwanted traffic that
it may not even be able to filter or sustain.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On 7278, port 7 of the switch connects to the ASP UniMAC which is not
capable of processing VLAN tagged frames. We can still allow the port to
be part of a VLAN entry, and we may want it to be untagged on egress on
that VLAN because of that limitation.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The first time b53_configure_vlan() is called we have not configured any
VLAN entries yet, since that happens later when interfaces get brought
up. When b53_configure_vlan() is called again from suspend/resume we
need to restore all VLAN entries though.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f949a12fd6 ("net: dsa: bcm_sf2: fix buffer overflow doing
set_rxnfc") tried to fix the some user controlled buffer overflows in
bcm_sf2_cfp_rule_set() and bcm_sf2_cfp_rule_del() but the fix was using
CFP_NUM_RULES, which while it is correct not to overflow the bitmaps, is
not representative of what the device actually supports. Correct that by
using bcm_sf2_cfp_rule_size() instead.
The latter subtracts the number of rules by 1, so change the checks from
greater than or equal to greater than accordingly.
Fixes: f949a12fd6 ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- A series of commits to make the MSR derived CPU and TSC frequency more
accurate.
It turned out that the frequency tables which have been taken from the
SDM are inaccurate because the SDM provides truncated and rounded
values, e.g. 83.3Mhz (83.3333...) or 116.7Mhz (116.6666...).
This causes time drift in the range of ~1 second per hour
(20-30 seconds per day). On some of these SoCs it's not possible to
recalibrate the TSC because there is no reference (PIT, HPET) available.
With some reverse engineering it was established that the possible
frequencies are derived from the base clock with fixed multiplier /
divider pairs.
For the CPU models which have a known crystal frequency the kernel now
uses multiplier / divider pairs which bring the frequencies closer to
reality and fix the observed time drift issues.
-----BEGIN PGP SIGNATURE-----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=9eX1
-----END PGP SIGNATURE-----
Merge tag 'x86-timers-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner:
"A series of commits to make the MSR derived CPU and TSC frequency more
accurate.
It turned out that the frequency tables which have been taken from the
SDM are inaccurate because the SDM provides truncated and rounded
values, e.g. 83.3Mhz (83.3333...) or 116.7Mhz (116.6666...).
This causes time drift in the range of ~1 second per hour (20-30
seconds per day). On some of these SoCs it's not possible to
recalibrate the TSC because there is no reference (PIT, HPET)
available.
With some reverse engineering it was established that the possible
frequencies are derived from the base clock with fixed multiplier /
divider pairs.
For the CPU models which have a known crystal frequency the kernel now
uses multiplier / divider pairs which bring the frequencies closer to
reality and fix the observed time drift issues"
* tag 'x86-timers-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc_msr: Make MSR derived TSC frequency more accurate
x86/tsc_msr: Fix MSR_FSB_FREQ mask for Cherry Trail devices
x86/tsc_msr: Use named struct initializers
The vzalloc_node(), already rounds the total size to whole pages, and
sizeof(u64) is smaller than sizeof(struct recv_comp_data). So
round_up of recv_completion_cnt is not necessary, and may cause extra
memory allocation.
To save memory, remove this unnecessary round_up for recv_completion_cnt.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
1) Add support to specify a stateful expression in set definitions,
this allows users to specify e.g. counters per set elements.
2) Flowtable software counter support.
3) Flowtable hardware offload counter support, from wenxu.
3) Parallelize flowtable hardware offload requests, from Paul Blakey.
This includes a patch to add one work entry per offload command.
4) Several patches to rework nf_queue refcount handling, from Florian
Westphal.
4) A few fixes for the flowtable tunnel offload: Fix crash if tunneling
information is missing and set up indirect flow block as TC_SETUP_FT,
patch from wenxu.
5) Stricter netlink attribute sanity check on filters, from Romain Bellan
and Florent Fourcot.
5) Annotations to make sparse happy, from Jules Irenge.
6) Improve icmp errors in debugging information, from Haishuang Yan.
7) Fix warning in IPVS icmp error debugging, from Haishuang Yan.
8) Fix endianess issue in tcp extension header, from Sergey Marinkevich.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Atomic operations (lock prefixed instructions) which span two cache
lines have to acquire the global bus lock. This is at least 1k cycles
slower than an atomic operation within a cache line and disrupts
performance on other cores. Aside of performance disruption this is
a unpriviledged form of DoS.
Some newer CPUs have the capability to raise an #AC trap when such an
operation is attempted. The detection is by default enabled in warning
mode which will warn once when a user space application is caught. A
command line option allows to disable the detection or to select fatal
mode which will terminate offending applications with SIGBUS.
-----BEGIN PGP SIGNATURE-----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=D9x8
-----END PGP SIGNATURE-----
Merge tag 'x86-splitlock-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 splitlock updates from Thomas Gleixner:
"Support for 'split lock' detection:
Atomic operations (lock prefixed instructions) which span two cache
lines have to acquire the global bus lock. This is at least 1k cycles
slower than an atomic operation within a cache line and disrupts
performance on other cores. Aside of performance disruption this is a
unpriviledged form of DoS.
Some newer CPUs have the capability to raise an #AC trap when such an
operation is attempted. The detection is by default enabled in warning
mode which will warn once when a user space application is caught. A
command line option allows to disable the detection or to select fatal
mode which will terminate offending applications with SIGBUS"
* tag 'x86-splitlock-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/split_lock: Avoid runtime reads of the TEST_CTRL MSR
x86/split_lock: Rework the initialization flow of split lock detection
x86/split_lock: Enable split lock detection by kernel
- Convert the 32bit syscalls to be pt_regs based which removes the
requirement to push all 6 potential arguments onto the stack and
consolidates the interface with the 64bit variant
- The first small portion of the exception and syscall related entry
code consolidation which aims to address the recently discovered
issues vs. RCU, int3, NMI and some other exceptions which can
interrupt any context. The bulk of the changes is still work in
progress and aimed for 5.8.
- A few lockdep namespace cleanups which have been applied into this
branch to keep the prerequisites for the ongoing work confined.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl6B/TMTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoYA6EAC7r/bCMxBelljT3b7LkBbiJcocJ+zK
OSzWU9miJGTAvYqn4/ciLKg4dA424b/1rBFlF1hBTCQ0HL5Cv4lajxdKEZCO5WCC
WWTCz+MC60aWFaH3VNoywiLGb39H2IbqWbS9yNPd/wBkLHiMAD6NPQntOvcPaD4j
1lyrMtLzfrWlrHxvxdI3kt5ZpFLYNXr2xk61xQjTz0ROFQBhf2sDsuhHhiYVLPj7
JwYktpbBiPeaw2+I18NPymNPY+VfY8LCTgLl5M+rbKyCqebKaedZQJ7QXFhAEqKC
Y2f+gJsKWtTDzGP2mk/5kF0uP7cd0vJK35ZCXtLZ9BbcNtFZU6w+ADqRo4pJBHRY
QRzo/AWrdkuTJF0CrP6mcneNC7NwWLSdKrE1z77RQCHUPVvhHhRDZsgdLcZ/KKwx
y1ji22trwNB+7LmI2fUOU5RRHZBIuNvQT+mPt24febJuHpZKul62dd3cqTGeSTC+
MYVknYDSg/+jk+83DhuZnTyb9lWTbq/0Q1HRDu6l2LrMIH7YMPpY5Ea64ZFYzWXy
s0+iHEM4mUzltwNauHIntjbwXi3C0l2k1WQyG0gun2eS6SXfu0lb93V4msFj/N1+
oHavH2n2A4XrRr+Ob87fsl7nfXJibWP7R9xPblrWP2sNdqfjSyGd49rnsvpWqWMK
Fj0d7tQ78+/SwA==
=tWXS
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry code updates from Thomas Gleixner:
- Convert the 32bit syscalls to be pt_regs based which removes the
requirement to push all 6 potential arguments onto the stack and
consolidates the interface with the 64bit variant
- The first small portion of the exception and syscall related entry
code consolidation which aims to address the recently discovered
issues vs. RCU, int3, NMI and some other exceptions which can
interrupt any context. The bulk of the changes is still work in
progress and aimed for 5.8.
- A few lockdep namespace cleanups which have been applied into this
branch to keep the prerequisites for the ongoing work confined.
* tag 'x86-entry-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
x86/entry: Fix build error x86 with !CONFIG_POSIX_TIMERS
lockdep: Rename trace_{hard,soft}{irq_context,irqs_enabled}()
lockdep: Rename trace_softirqs_{on,off}()
lockdep: Rename trace_hardirq_{enter,exit}()
x86/entry: Rename ___preempt_schedule
x86: Remove unneeded includes
x86/entry: Drop asmlinkage from syscalls
x86/entry/32: Enable pt_regs based syscalls
x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments
x86/entry/32: Rename 32-bit specific syscalls
x86/entry/32: Clean up syscall_32.tbl
x86/entry: Remove ABI prefixes from functions in syscall tables
x86/entry/64: Add __SYSCALL_COMMON()
x86/entry: Remove syscall qualifier support
x86/entry/64: Remove ptregs qualifier from syscall table
x86/entry: Move max syscall number calculation to syscallhdr.sh
x86/entry/64: Split X32 syscall table into its own file
x86/entry/64: Move sys_ni_syscall stub to common.c
x86/entry/64: Use syscall wrappers for x32_rt_sigreturn
x86/entry: Refactor SYS_NI macros
...
Core:
- Consolidation of the vDSO build infrastructure to address the
difficulties of cross-builds for ARM64 compat vDSO libraries by
restricting the exposure of header content to the vDSO build.
This is achieved by splitting out header content into separate
headers. which contain only the minimaly required information which is
necessary to build the vDSO. These new headers are included from the
kernel headers and the vDSO specific files.
- Enhancements to the generic vDSO library allowing more fine grained
control over the compiled in code, further reducing architecture
specific storage and preparing for adopting the generic library by PPC.
- Cleanup and consolidation of the exit related code in posix CPU timers.
- Small cleanups and enhancements here and there
Drivers:
- The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support
- Correct the clock rate of PIT64b global clock
- setup_irq() cleanup
- Preparation for PWM and suspend support for the TI DM timer
- Expand the fttmr010 driver to support ast2600 systems
- The usual small fixes, enhancements and cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=5o9G
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping and timer updates from Thomas Gleixner:
"Core:
- Consolidation of the vDSO build infrastructure to address the
difficulties of cross-builds for ARM64 compat vDSO libraries by
restricting the exposure of header content to the vDSO build.
This is achieved by splitting out header content into separate
headers. which contain only the minimaly required information which
is necessary to build the vDSO. These new headers are included from
the kernel headers and the vDSO specific files.
- Enhancements to the generic vDSO library allowing more fine grained
control over the compiled in code, further reducing architecture
specific storage and preparing for adopting the generic library by
PPC.
- Cleanup and consolidation of the exit related code in posix CPU
timers.
- Small cleanups and enhancements here and there
Drivers:
- The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support
- Correct the clock rate of PIT64b global clock
- setup_irq() cleanup
- Preparation for PWM and suspend support for the TI DM timer
- Expand the fttmr010 driver to support ast2600 systems
- The usual small fixes, enhancements and cleanups all over the
place"
* tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
Revert "clocksource/drivers/timer-probe: Avoid creating dead devices"
vdso: Fix clocksource.h macro detection
um: Fix header inclusion
arm64: vdso32: Enable Clang Compilation
lib/vdso: Enable common headers
arm: vdso: Enable arm to use common headers
x86/vdso: Enable x86 to use common headers
mips: vdso: Enable mips to use common headers
arm64: vdso32: Include common headers in the vdso library
arm64: vdso: Include common headers in the vdso library
arm64: Introduce asm/vdso/processor.h
arm64: vdso32: Code clean up
linux/elfnote.h: Replace elf.h with UAPI equivalent
scripts: Fix the inclusion order in modpost
common: Introduce processor.h
linux/ktime.h: Extract common header for vDSO
linux/jiffies.h: Extract common header for vDSO
linux/time64.h: Extract common header for vDSO
linux/time32.h: Extract common header for vDSO
linux/time.h: Extract common header for vDSO
...
- Remove TIF_NOHZ from 3 architectures
These architectures use a static key to decide whether context tracking
needs to be invoked and the TIF_NOHZ flag just causes a pointless
slowpath execution for nothing.
-----BEGIN PGP SIGNATURE-----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=0lHP
-----END PGP SIGNATURE-----
Merge tag 'timers-nohz-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull NOHZ update from Thomas Gleixner:
"Remove TIF_NOHZ from three architectures
These architectures use a static key to decide whether context
tracking needs to be invoked and the TIF_NOHZ flag just causes a
pointless slowpath execution for nothing"
* tag 'timers-nohz-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64: Remove TIF_NOHZ
arm: Remove TIF_NOHZ
x86: Remove TIF_NOHZ
context-tracking: Introduce CONFIG_HAVE_TIF_NOHZ
x86/entry: Remove _TIF_NOHZ from _TIF_WORK_SYSCALL_ENTRY
- Support for locked CSD objects in smp_call_function_single_async()
which allows to simplify callsites in the scheduler core and MIPS
- Treewide consolidation of CPU hotplug functions which ensures the
consistency between the sysfs interface and kernel state. The low level
functions cpu_up/down() are now confined to the core code and not
longer accessible from random code.
-----BEGIN PGP SIGNATURE-----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=jwCg
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core SMP updates from Thomas Gleixner:
"CPU (hotplug) updates:
- Support for locked CSD objects in smp_call_function_single_async()
which allows to simplify callsites in the scheduler core and MIPS
- Treewide consolidation of CPU hotplug functions which ensures the
consistency between the sysfs interface and kernel state. The low
level functions cpu_up/down() are now confined to the core code and
not longer accessible from random code"
* tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus()
cpu/hotplug: Hide cpu_up/down()
cpu/hotplug: Move bringup of secondary CPUs out of smp_init()
torture: Replace cpu_up/down() with add/remove_cpu()
firmware: psci: Replace cpu_up/down() with add/remove_cpu()
xen/cpuhotplug: Replace cpu_up/down() with device_online/offline()
parisc: Replace cpu_up/down() with add/remove_cpu()
sparc: Replace cpu_up/down() with add/remove_cpu()
powerpc: Replace cpu_up/down() with add/remove_cpu()
x86/smp: Replace cpu_up/down() with add/remove_cpu()
arm64: hibernate: Use bringup_hibernate_cpu()
cpu/hotplug: Provide bringup_hibernate_cpu()
arm64: Use reboot_cpu instead of hardconding it to 0
arm64: Don't use disable_nonboot_cpus()
ARM: Use reboot_cpu instead of hardcoding it to 0
ARM: Don't use disable_nonboot_cpus()
ia64: Replace cpu_down() with smp_shutdown_nonboot_cpus()
cpu/hotplug: Create a new function to shutdown nonboot cpus
cpu/hotplug: Add new {add,remove}_cpu() functions
sched/core: Remove rq.hrtick_csd_pending
...
Ido Schimmel says:
====================
Add packet trap policers support
Background
==========
Devices capable of offloading the kernel's datapath and perform
functions such as bridging and routing must also be able to send (trap)
specific packets to the kernel (i.e., the CPU) for processing.
For example, a device acting as a multicast-aware bridge must be able to
trap IGMP membership reports to the kernel for processing by the bridge
module.
Motivation
==========
In most cases, the underlying device is capable of handling packet rates
that are several orders of magnitude higher compared to those that can
be handled by the CPU.
Therefore, in order to prevent the underlying device from overwhelming
the CPU, devices usually include packet trap policers that are able to
police the trapped packets to rates that can be handled by the CPU.
Proposed solution
=================
This patch set allows capable device drivers to register their supported
packet trap policers with devlink. User space can then tune the
parameters of these policers (currently, rate and burst size) and read
from the device the number of packets that were dropped by the policer,
if supported.
These packet trap policers can then be bound to existing packet trap
groups, which are used to aggregate logically related packet traps. As a
result, trapped packets are policed to rates that can be handled the
host CPU.
Example usage
=============
Instantiate netdevsim:
Dump available packet trap policers:
netdevsim/netdevsim10:
policer 1 rate 1000 burst 128
policer 2 rate 2000 burst 256
policer 3 rate 3000 burst 512
Change the parameters of a packet trap policer:
Bind a packet trap policer to a packet trap group:
Dump parameters and statistics of a packet trap policer:
netdevsim/netdevsim10:
policer 3 rate 100 burst 16
stats:
rx:
dropped 92
Unbind a packet trap policer from a packet trap group:
Patch set overview
==================
Patch #1 adds the core infrastructure in devlink which allows capable
device drivers to register their supported packet trap policers with
devlink.
Patch #2 extends the existing devlink-trap documentation.
Patch #3 extends netdevsim to register a few dummy packet trap policers
with devlink. Used later on to selftests the core infrastructure.
Patches #4-#5 adds infrastructure in devlink to allow binding of packet
trap policers to packet trap groups.
Patch #6 extends netdevsim to allow such binding.
Patch #7 adds a selftest over netdevsim that verifies the core
devlink-trap policers functionality.
Patches #8-#14 gradually add devlink-trap policers support in mlxsw.
Patch #15 adds a selftest over mlxsw. All registered packet trap
policers are verified to handle the configured rate and burst size.
Future plans
============
* Allow changing default association between packet traps and packet
trap groups
* Add more packet traps. For example, for control packets (e.g., IGMP)
v3:
* Rebase
v2 (address comments from Jiri and Jakub):
* Patch #1: Add 'strict_start_type' in devlink policy
* Patch #1: Have device drivers provide max/min rate/burst size for each
policer. Use them to check validity of user provided parameters
* Patch #3: Remove check about burst size being a power of 2 and instead
add a debugfs knob to fail the operation
* Patch #3: Provide max/min rate/burst size when registering policers
and remove the validity checks from nsim_dev_devlink_trap_policer_set()
* Patch #5: Check for presence of 'DEVLINK_ATTR_TRAP_POLICER_ID' in
devlink_trap_group_set() and bail if not present
* Patch #5: Add extack error message in case trap group was partially
modified
* Patch #7: Add test case with new 'fail_trap_policer_set' knob
* Patch #7: Add test case for partially modified trap group
* Patch #10: Provide max/min rate/burst size when registering policers
* Patch #11: Remove the max/min validity checks from
__mlxsw_sp_trap_policer_set()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test cases that verify that each registered packet trap policer:
* Honors that imposed limitations of rate and burst size
* Able to police trapped packets to the specified rate
* Able to police trapped packets to the specified burst size
* Able to be unbound from its trap group
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement support for setting of packet trap group parameters by
invoking the trap_group_init() callback with the new parameters.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some packet traps are currently exposed to user space as being member of
"l3_drops" trap group, but internally they are member of a different
group.
Switch these traps to use the correct group so that they are all subject
to the same policer, as exposed to user space.
Set the trap priority of packets trapped due to loopback error during
routing to the lowest priority. Such packets are not routed again by the
kernel and therefore should not mask other traps (e.g., host miss) that
should be routed.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The policer is now initialized as part of the registration with devlink,
so there is no need to initialize it before the registration.
Remove the initialization.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Register supported packet trap policers with devlink and implement
callbacks to change their parameters and read their counters.
Prevent user space from passing invalid policer parameters down to the
device by checking their validity and communicating the failure via an
appropriate extack message.
v2:
* Remove the max/min validity checks from __mlxsw_sp_trap_policer_set()
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare an array of policer IDs to register with devlink and their
associated parameters.
The array is composed from both policers that are currently bound to
exposed trap groups and policers that are not bound to any trap group.
v2:
* Provide max/min rate/burst size when registering policers
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During initialization the driver configures various packet trap groups
and binds policers to them.
Currently, most of these groups are not exposed to user space and
therefore their policers should not be exposed as well. Otherwise, user
space will be able to alter policer parameters without knowing which
packet traps are policed by the policer.
Use a bitmap to track the used policer IDs so that these policers will
not be registered with devlink in a subsequent patch.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The QoS Policer Configuration Register (QPCR) is used to configure
hardware policers. Extend this register with following fields and
defines which will be used by subsequent patches:
1. Violate counter: reads number of packets dropped by the policer
2. Clear counter: to ensure we start counting from 0
3. Rate and burst size limits
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test cases for packet trap policer set / show commands as well as
for the binding of these policers to packet trap groups.
Both good and bad flows are tested for maximum coverage.
v2:
* Add test case with new 'fail_trap_policer_set' knob
* Add test case for partially modified trap group
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a dummy callback to set trap group parameters. Return an error when
the 'fail_trap_group_set' debugfs file is set in order to exercise error
paths and verify that error is propagated to user space when should.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous patch allowed device drivers to publish their default
binding between packet trap policers and packet trap groups. However,
some users might not be content with this binding and would like to
change it.
In case user space passed a packet trap policer identifier when setting
a packet trap group, invoke the appropriate device driver callback and
pass the new policer identifier.
v2:
* Check for presence of 'DEVLINK_ATTR_TRAP_POLICER_ID' in
devlink_trap_group_set() and bail if not present
* Add extack error message in case trap group was partially modified
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Packet trap groups are used to aggregate logically related packet traps.
Currently, these groups allow user space to batch operations such as
setting the trap action of all member traps.
In order to prevent the CPU from being overwhelmed by too many trapped
packets, it is desirable to bind a packet trap policer to these groups.
For example, to limit all the packets that encountered an exception
during routing to 10Kpps.
Allow device drivers to bind default packet trap policers to packet trap
groups when the latter are registered with devlink.
The next patch will enable user space to change this default binding.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Register three dummy packet trap policers with devlink and implement
callbacks to change their parameters and read their counters.
This will be used later on in the series to test the devlink-trap
policer infrastructure.
v2:
* Remove check about burst size being a power of 2 and instead add a
debugfs knob to fail the operation
* Provide max/min rate/burst size when registering policers and remove
the validity checks from nsim_dev_devlink_trap_policer_set()
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend devlink-trap documentation with information about packet trap
policers.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Devices capable of offloading the kernel's datapath and perform
functions such as bridging and routing must also be able to send (trap)
specific packets to the kernel (i.e., the CPU) for processing.
For example, a device acting as a multicast-aware bridge must be able to
trap IGMP membership reports to the kernel for processing by the bridge
module.
In most cases, the underlying device is capable of handling packet rates
that are several orders of magnitude higher compared to those that can
be handled by the CPU.
Therefore, in order to prevent the underlying device from overwhelming
the CPU, devices usually include packet trap policers that are able to
police the trapped packets to rates that can be handled by the CPU.
This patch allows capable device drivers to register their supported
packet trap policers with devlink. User space can then tune the
parameters of these policer (currently, rate and burst size) and read
from the device the number of packets that were dropped by the policer,
if supported.
Subsequent patches in the series will allow device drivers to create
default binding between these policers and packet trap groups and allow
user space to change the binding.
v2:
* Add 'strict_start_type' in devlink policy
* Have device drivers provide max/min rate/burst size for each policer.
Use them to check validity of user provided parameters
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrii Nakryiko says:
====================
bpf_link abstraction itself was formalized in [0] with justifications for why
its semantics is a good fit for attaching BPF programs of various types. This
patch set adds bpf_link-based BPF program attachment mechanism for cgroup BPF
programs.
Cgroup BPF link is semantically compatible with current BPF_F_ALLOW_MULTI
semantics of attaching cgroup BPF programs directly. Thus cgroup bpf_link can
co-exist with legacy BPF program multi-attachment.
bpf_link is destroyed and automatically detached when the last open FD holding
the reference to bpf_link is closed. This means that by default, when the
process that created bpf_link exits, attached BPF program will be
automatically detached due to bpf_link's clean up code. Cgroup bpf_link, like
any other bpf_link, can be pinned in BPF FS and by those means survive the
exit of process that created the link. This is useful in many scenarios to
provide long-living BPF program attachments. Pinning also means that there
could be many owners of bpf_link through independent FDs.
Additionally, auto-detachmet of cgroup bpf_link is implemented. When cgroup is
dying it will automatically detach all active bpf_links. This ensures that
cgroup clean up is not delayed due to active bpf_link even despite no chance
for any BPF program to be run for a given cgroup. In that sense it's similar
to existing behavior of dropping refcnt of attached bpf_prog. But in the case
of bpf_link, bpf_link is not destroyed and is still available to user as long
as at least one active FD is still open (or if it's pinned in BPF FS).
There are two main cgroup-specific differences between bpf_link-based and
direct bpf_prog-based attachment.
First, as opposed to direct bpf_prog attachment, cgroup itself doesn't "own"
bpf_link, which makes it possible to auto-clean up attached bpf_link when user
process abruptly exits without explicitly detaching BPF program. This makes
for a safe default behavior proven in BPF tracing program types. But bpf_link
doesn't bump cgroup->bpf.refcnt as well and because of that doesn't prevent
cgroup from cleaning up its BPF state.
Second, only owners of bpf_link (those who created bpf_link in the first place
or obtained a new FD by opening bpf_link from BPF FS) can detach and/or update
it. This makes sure that no other process can accidentally remove/replace BPF
program.
This patch set also implements LINK_UPDATE sub-command, which allows to
replace bpf_link's underlying bpf_prog, similarly to BPF_F_REPLACE flag
behavior for direct bpf_prog cgroup attachment. Similarly to LINK_CREATE, it
is supposed to be generic command for different types of bpf_links.
[0] https://lore.kernel.org/bpf/20200228223948.360936-1-andriin@fb.com/
v2->v3:
- revert back to just MULTI mode (Alexei);
- fix tinyconfig compilation warning (kbuild test robot);
v1->v2:
- implement exclusive and overridable exclusive modes (Andrey Ignatov);
- fix build for !CONFIG_CGROUP_BPF build;
- add more selftests for non-multi mode and inter-operability;
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests to exercise FD-based cgroup BPF program attachments and their
intermixing with legacy cgroup BPF attachments. Auto-detachment and program
replacement (both unconditional and cmpxchng-like) are tested as well.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200330030001.2312810-5-andriin@fb.com
Add bpf_program__attach_cgroup(), which uses BPF_LINK_CREATE subcommand to
create an FD-based kernel bpf_link. Also add low-level bpf_link_create() API.
If expected_attach_type is not specified explicitly with
bpf_program__set_expected_attach_type(), libbpf will try to determine proper
attach type from BPF program's section definition.
Also add support for bpf_link's underlying BPF program replacement:
- unconditional through high-level bpf_link__update_program() API;
- cmpxchg-like with specifying expected current BPF program through
low-level bpf_link_update() API.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200330030001.2312810-4-andriin@fb.com
Add new operation (LINK_UPDATE), which allows to replace active bpf_prog from
under given bpf_link. Currently this is only supported for bpf_cgroup_link,
but will be extended to other kinds of bpf_links in follow-up patches.
For bpf_cgroup_link, implemented functionality matches existing semantics for
direct bpf_prog attachment (including BPF_F_REPLACE flag). User can either
unconditionally set new bpf_prog regardless of which bpf_prog is currently
active under given bpf_link, or, optionally, can specify expected active
bpf_prog. If active bpf_prog doesn't match expected one, no changes are
performed, old bpf_link stays intact and attached, operation returns
a failure.
cgroup_bpf_replace() operation is resolving race between auto-detachment and
bpf_prog update in the same fashion as it's done for bpf_link detachment,
except in this case update has no way of succeeding because of target cgroup
marked as dying. So in this case error is returned.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200330030001.2312810-3-andriin@fb.com
Implement new sub-command to attach cgroup BPF programs and return FD-based
bpf_link back on success. bpf_link, once attached to cgroup, cannot be
replaced, except by owner having its FD. Cgroup bpf_link supports only
BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI
attachments can be freely intermixed.
To prevent bpf_cgroup_link from keeping cgroup alive past the point when no
BPF program can be executed, implement auto-detachment of link. When
cgroup_bpf_release() is called, all attached bpf_links are forced to release
cgroup refcounts, but they leave bpf_link otherwise active and allocated, as
well as still owning underlying bpf_prog. This is because user-space might
still have FDs open and active, so bpf_link as a user-referenced object can't
be freed yet. Once last active FD is closed, bpf_link will be freed and
underlying bpf_prog refcount will be dropped. But cgroup refcount won't be
touched, because cgroup is released already.
The inherent race between bpf_cgroup_link release (from closing last FD) and
cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So
the only additional check required is when bpf_cgroup_link attempts to detach
itself from cgroup. At that time we need to check whether there is still
cgroup associated with that link. And if not, exit with success, because
bpf_cgroup_link was already successfully detached.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
Treewide:
- Cleanup of setup_irq() which is not longer required because the
memory allocator is available early. Most cleanup changes come
through the various maintainer trees, so the final removal of
setup_irq() is postponed towards the end of the merge window.
Core:
- Protection against unsafe invocation of interrupt handlers and unsafe
interrupt injection including a fixup of the offending PCI/AER error
injection mechanism.
Invoking interrupt handlers from arbitrary contexts, i.e. outside of
an actual interrupt, can cause inconsistent state on the fragile
x86 interrupt affinity changing hardware trainwreck.
Drivers:
- Second wave of support for the new ARM GICv4.1
- Multi-instance support for Xilinx and PLIC interrupt controllers
- CPU-Hotplug support for PLIC
- The obligatory new driver for X1000 TCU
- Enhancements, cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=DZ/G
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Treewide:
- Cleanup of setup_irq() which is not longer required because the
memory allocator is available early.
Most cleanup changes come through the various maintainer trees, so
the final removal of setup_irq() is postponed towards the end of
the merge window.
Core:
- Protection against unsafe invocation of interrupt handlers and
unsafe interrupt injection including a fixup of the offending
PCI/AER error injection mechanism.
Invoking interrupt handlers from arbitrary contexts, i.e. outside
of an actual interrupt, can cause inconsistent state on the
fragile x86 interrupt affinity changing hardware trainwreck.
Drivers:
- Second wave of support for the new ARM GICv4.1
- Multi-instance support for Xilinx and PLIC interrupt controllers
- CPU-Hotplug support for PLIC
- The obligatory new driver for X1000 TCU
- Enhancements, cleanups and fixes all over the place"
* tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
unicore32: Replace setup_irq() by request_irq()
sh: Replace setup_irq() by request_irq()
hexagon: Replace setup_irq() by request_irq()
c6x: Replace setup_irq() by request_irq()
alpha: Replace setup_irq() by request_irq()
irqchip/gic-v4.1: Eagerly vmap vPEs
irqchip/gic-v4.1: Add VSGI property setup
irqchip/gic-v4.1: Add VSGI allocation/teardown
irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer
irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks
irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks
irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks
irqchip/gic-v4.1: Add initial SGI configuration
irqchip/gic-v4.1: Plumb skeletal VSGI irqchip
irqchip/stm32: Retrigger both in eoi and unmask callbacks
irqchip/gic-v3: Move irq_domain_update_bus_token to after checking for NULL domain
irqchip/xilinx: Do not call irq_set_default_host()
irqchip/xilinx: Enable generic irq multi handler
irqchip/xilinx: Fill error code when irq domain registration fails
irqchip/xilinx: Add support for multiple instances
...
There's a semantic conflict in the Octeon staging network driver, which
used the skb_reset_tc() function to reset skb state when re-using an
skb. But that inline helper function was removed in mainline by commit
2c64605b59 ("net: Fix CONFIG_NET_CLS_ACT=n and
CONFIG_NFT_FWD_NETDEV={y, m} build").
Fix it by using skb_reset_redirect() instead. Also move it out of the
This code path only ends up triggering if REUSE_SKBUFFS_WITHOUT_FREE is
enabled, which in turn only happens if you don't have CONFIG_NETFILTER
configured. Which was how this wasn't caught by the usual allmodconfig
builds.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle are:
- Various NUMA scheduling updates: harmonize the load-balancer and
NUMA placement logic to not work against each other. The intended
result is better locality, better utilization and fewer migrations.
- Introduce Thermal Pressure tracking and optimizations, to improve
task placement on thermally overloaded systems.
- Implement frequency invariant scheduler accounting on (some) x86
CPUs. This is done by observing and sampling the 'recent' CPU
frequency average at ~tick boundaries. The CPU provides this data
via the APERF/MPERF MSRs. This hopefully makes our capacity
estimates more precise and keeps tasks on the same CPU better even
if it might seem overloaded at a lower momentary frequency. (As
usual, turbo mode is a complication that we resolve by observing
the maximum frequency and renormalizing to it.)
- Add asymmetric CPU capacity wakeup scan to improve capacity
utilization on asymmetric topologies. (big.LITTLE systems)
- PSI fixes and optimizations.
- RT scheduling capacity awareness fixes & improvements.
- Optimize the CONFIG_RT_GROUP_SCHED constraints code.
- Misc fixes, cleanups and optimizations - see the changelog for
details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
threads: Update PID limit comment according to futex UAPI change
sched/fair: Fix condition of avg_load calculation
sched/rt: cpupri_find: Trigger a full search as fallback
kthread: Do not preempt current task if it is going to call schedule()
sched/fair: Improve spreading of utilization
sched: Avoid scale real weight down to zero
psi: Move PF_MEMSTALL out of task->flags
MAINTAINERS: Add maintenance information for psi
psi: Optimize switching tasks inside shared cgroups
psi: Fix cpu.pressure for cpu.max and competing cgroups
sched/core: Distribute tasks within affinity masks
sched/fair: Fix enqueue_task_fair warning
thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code
sched/rt: Remove unnecessary push for unfit tasks
sched/rt: Allow pulling unfitting task
sched/rt: Optimize cpupri_find() on non-heterogenous systems
sched/rt: Re-instate old behavior in select_task_rq_rt()
sched/rt: cpupri_find: Implement fallback mechanism for !fit case
sched/fair: Fix reordering of enqueue/dequeue_task_fair()
sched/fair: Fix runnable_avg for throttled cfs
...
The assignment of e->type_names is indented one level too deep,
clean this up by removing the extraneous tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
When using NFSv4.2, the security label for the root inode should be set
via a call to nfs_setsecurity() during the mount process, otherwise the
inode will appear as unlabeled for up to acdirmin seconds. Currently
the label for the root inode is allocated, retrieved, and freed entirely
witin nfs4_proc_get_root().
Add a field for the label to the nfs_fattr struct, and allocate & free
the label in nfs_get_root(), where we also add a call to
nfs_setsecurity(). Note that for the call to nfs_setsecurity() to
succeed, it's necessary to also move the logic calling
security_sb_{set,clone}_security() from nfs_get_tree_common() down into
nfs_get_root()... otherwise the SBLABEL_MNT flag will not be set in the
super_block's security flags and nfs_setsecurity() will silently fail.
Reported-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Tested-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: fixed 80-char line width problems]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- A couple of x86/cpu cleanups and changes were grandfathered in due
to patch dependencies. These clean up the set of CPU model/family
matching macros with a consistent namespace and C99 initializer
style.
- A bunch of updates to various low level PMU drivers:
* AMD Family 19h L3 uncore PMU
* Intel Tiger Lake uncore support
* misc fixes to LBR TOS sampling
- optprobe fixes
- perf/cgroup: optimize cgroup event sched-in processing
- misc cleanups and fixes
Tooling side changes are to:
- perf {annotate,expr,record,report,stat,test}
- perl scripting
- libapi, libperf and libtraceevent
- vendor events on Intel and S390, ARM cs-etm
- Intel PT updates
- Documentation changes and updates to core facilities
- misc cleanups, fixes and other enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
cpufreq/intel_pstate: Fix wrong macro conversion
x86/cpu: Cleanup the now unused CPU match macros
hwrng: via_rng: Convert to new X86 CPU match macros
crypto: Convert to new CPU match macros
ASoC: Intel: Convert to new X86 CPU match macros
powercap/intel_rapl: Convert to new X86 CPU match macros
PCI: intel-mid: Convert to new X86 CPU match macros
mmc: sdhci-acpi: Convert to new X86 CPU match macros
intel_idle: Convert to new X86 CPU match macros
extcon: axp288: Convert to new X86 CPU match macros
thermal: Convert to new X86 CPU match macros
hwmon: Convert to new X86 CPU match macros
platform/x86: Convert to new CPU match macros
EDAC: Convert to new X86 CPU match macros
cpufreq: Convert to new X86 CPU match macros
ACPI: Convert to new X86 CPU match macros
x86/platform: Convert to new CPU match macros
x86/kernel: Convert to new CPU match macros
x86/kvm: Convert to new CPU match macros
x86/perf/events: Convert to new CPU match macros
...
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Continued user-access cleanups in the futex code.
- percpu-rwsem rewrite that uses its own waitqueue and atomic_t
instead of an embedded rwsem. This addresses a couple of
weaknesses, but the primary motivation was complications on the -rt
kernel.
- Introduce raw lock nesting detection on lockdep
(CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal
lock differences. This too originates from -rt.
- Reuse lockdep zapped chain_hlocks entries, to conserve RAM
footprint on distro-ish kernels running into the "BUG:
MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep
chain-entries pool.
- Misc cleanups, smaller fixes and enhancements - see the changelog
for details"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
Documentation/locking/locktypes: Minor copy editor fixes
Documentation/locking/locktypes: Further clarifications and wordsmithing
m68knommu: Remove mm.h include from uaccess_no.h
x86: get rid of user_atomic_cmpxchg_inatomic()
generic arch_futex_atomic_op_inuser() doesn't need access_ok()
x86: don't reload after cmpxchg in unsafe_atomic_op2() loop
x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end()
objtool: whitelist __sanitizer_cov_trace_switch()
[parisc, s390, sparc64] no need for access_ok() in futex handling
sh: no need of access_ok() in arch_futex_atomic_op_inuser()
futex: arch_futex_atomic_op_inuser() calling conventions change
completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all()
lockdep: Add posixtimer context tracing bits
lockdep: Annotate irq_work
lockdep: Add hrtimer context tracing bits
lockdep: Introduce wait-type checks
completion: Use simple wait queues
sched/swait: Prepare usage in completions
...
Pull EFI updates from Ingo Molnar:
"The EFI changes in this cycle are much larger than usual, for two
(positive) reasons:
- The GRUB project is showing signs of life again, resulting in the
introduction of the generic Linux/UEFI boot protocol, instead of
x86 specific hacks which are increasingly difficult to maintain.
There's hope that all future extensions will now go through that
boot protocol.
- Preparatory work for RISC-V EFI support.
The main changes are:
- Boot time GDT handling changes
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file
I/O, memory allocation, etc.
- Introduce a generic initrd loading method based on calling back
into the firmware, instead of relying on the x86 EFI handover
protocol or device tree.
- Introduce a mixed mode boot method that does not rely on the x86
EFI handover protocol either, and could potentially be adopted by
other architectures (if another one ever surfaces where one
execution mode is a superset of another)
- Clean up the contents of 'struct efi', and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit
firmware implementations to return EFI_UNSUPPORTED from UEFI
runtime services at OS runtime, and expose a mask of which ones are
supported or unsupported via a configuration table.
- Partial fix for the lack of by-VA cache maintenance in the
decompressor on 32-bit ARM.
- Changes to load device firmware from EFI boot service memory
regions
- Various documentation updates and minor code cleanups and fixes"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
efi/libstub/arm: Fix spurious message that an initrd was loaded
efi/libstub/arm64: Avoid image_base value from efi_loaded_image
partitions/efi: Fix partition name parsing in GUID partition entry
efi/x86: Fix cast of image argument
efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations
efi: Fix a mistype in comments mentioning efivar_entry_iter_begin()
efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map()
efi/x86: Ignore the memory attributes table on i386
efi/x86: Don't relocate the kernel unless necessary
efi/x86: Remove extra headroom for setup block
efi/x86: Add kernel preferred address to PE header
efi/x86: Decompress at start of PE image load address
x86/boot/compressed/32: Save the output address instead of recalculating it
efi/libstub/x86: Deal with exit() boot service returning
x86/boot: Use unsigned comparison for addresses
efi/x86: Avoid using code32_start
efi/x86: Make efi32_pe_entry() more readable
efi/x86: Respect 32-bit ABI in efi32_pe_entry()
efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA
...
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:
- Make kfree_rcu() use kfree_bulk() for added performance
- RCU updates
- Callback-overload handling updates
- Tasks-RCU KCSAN and sparse updates
- Locking torture test and RCU torture test updates
- Documentation updates
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits)
rcu: Make rcu_barrier() account for offline no-CBs CPUs
rcu: Mark rcu_state.gp_seq to detect concurrent writes
Documentation/memory-barriers: Fix typos
doc: Add rcutorture scripting to torture.txt
doc/RCU/rcu: Use https instead of http if possible
doc/RCU/rcu: Use absolute paths for non-rst files
doc/RCU/rcu: Use ':ref:' for links to other docs
doc/RCU/listRCU: Update example function name
doc/RCU/listRCU: Fix typos in a example code snippets
doc/RCU/Design: Remove remaining HTML tags in ReST files
doc: Add some more RCU list patterns in the kernel
rcutorture: Set KCSAN Kconfig options to detect more data races
rcutorture: Manually clean up after rcu_barrier() failure
rcutorture: Make rcu_torture_barrier_cbs() post from corresponding CPU
rcuperf: Measure memory footprint during kfree_rcu() test
rcutorture: Annotation lockless accesses to rcu_torture_current
rcutorture: Add READ_ONCE() to rcu_torture_count and rcu_torture_batch
rcutorture: Fix stray access to rcu_fwd_cb_nodelay
rcutorture: Fix rcu_torture_one_read()/rcu_torture_writer() data race
rcutorture: Make kvm-find-errors.sh abort on bad directory
...
Pull objtool updates from Ingo Molnar:
"The biggest changes in this cycle were the vmlinux.o optimizations by
Peter Zijlstra, which are preparatory and optimization work to run
objtool against the much richer vmlinux.o object file, to perform
new, whole-program section based logic. That work exposed a handful
of problems with the existing code, which fixes and optimizations are
merged here. The complete 'vmlinux.o and noinstr' work is still work
in progress, targeted for v5.8.
There's also assorted fixes and enhancements from Josh Poimboeuf.
In particular I'd like to draw attention to commit 644592d328,
which turns fatal objtool errors into failed kernel builds. This
behavior is IMO now justified on multiple grounds (it's easy currently
to not notice an essentially corrupted kernel build), and the commit
has been in -next testing for several weeks, but there could still be
build failures with old or weird toolchains. Should that be widespread
or high profile enough then I'd suggest a quick revert, to not hold up
the merge window"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
objtool: Re-arrange validate_functions()
objtool: Optimize find_rela_by_dest_range()
objtool: Delete cleanup()
objtool: Optimize read_sections()
objtool: Optimize find_symbol_by_name()
objtool: Resize insn_hash
objtool: Rename find_containing_func()
objtool: Optimize find_symbol_*() and read_symbols()
objtool: Optimize find_section_by_name()
objtool: Optimize find_section_by_index()
objtool: Add a statistics mode
objtool: Optimize find_symbol_by_index()
x86/kexec: Make relocate_kernel_64.S objtool clean
x86/kexec: Use RIP relative addressing
objtool: Rename func_for_each_insn_all()
objtool: Rename func_for_each_insn()
objtool: Introduce validate_return()
objtool: Improve call destination function detection
objtool: Fix clang switch table edge case
objtool: Add relocation check for alternative sections
...
Update MAINTAINERS to cover include/linux/pnp.h and add the linux-acpi
list to the PNP entry in it, add the const modifier to the name field
definition in struct pnp_driver and drop a pointer case in the RTC
CMOS driver that has become redundant (Corentin Labbe).
-----BEGIN PGP SIGNATURE-----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=PLMG
-----END PGP SIGNATURE-----
Merge tag 'pnp-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull PNP subsystem updates from Rafael Wysocki:
- Update MAINTAINERS to cover include/linux/pnp.h and add the
linux-acpi list to the PNP entry in it
- add the const modifier to the name field definition in struct
pnp_driver
- drop a pointer case in the RTC CMOS driver that has become redundant
All by Corentin Labbe.
* tag 'pnp-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
MAINTAINERS: Add linux-acpi list to PNP
rtc: cmos: remove useless cast for driver_name
PNP: constify driver name
PNP: add missing include/linux/pnp.h to MAINTAINERS
- Update the ACPICA code in the kernel to the 20200214 upstream
release including:
* Fix to re-enable the sleep button after wakeup (Anchal Agarwal).
* Fixes for mistakes in comments and typos (Bob Moore).
* ASL-ASL+ converter updates (Erik Kaneda).
* Type casting cleanups (Sven Barth).
- Clean up the intialization of the EC driver and eliminate some
dead code from it (Rafael Wysocki).
- Clean up the quirk tables in the AC and battery drivers (Hans de
Goede).
- Fix the global lock handling on x86 to ignore unspecified bit
positions in the global lock field (Jan Engelhardt).
- Add a new "tiny" driver for ACPI button devices exposed by VMs to
guest kernels to send signals directly to init (Josh Triplett).
- Add a kernel parameter to disable ACPI BGRT on x86 (Alex Hung).
- Make the ACPI PCI host bridge and fan drivers use scnprintf() to
avoid potential buffer overflows (Takashi Iwai).
- Clean up assorted pieces of code:
* Reorder "asmlinkage" to make g++ happy (Alexey Dobriyan).
* Drop unneeded variable initialization (Colin Ian King).
* Add missing __acquires/__releases annotations (Jules Irenge).
* Replace list_for_each_safe() with list_for_each_entry_safe()
(chenqiwu).
-----BEGIN PGP SIGNATURE-----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=kQmH
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
- Update the ACPICA code in the kernel to the 20200214 upstream
release including:
* Fix to re-enable the sleep button after wakeup (Anchal
Agarwal).
* Fixes for mistakes in comments and typos (Bob Moore).
* ASL-ASL+ converter updates (Erik Kaneda).
* Type casting cleanups (Sven Barth).
- Clean up the intialization of the EC driver and eliminate some dead
code from it (Rafael Wysocki).
- Clean up the quirk tables in the AC and battery drivers (Hans de
Goede).
- Fix the global lock handling on x86 to ignore unspecified bit
positions in the global lock field (Jan Engelhardt).
- Add a new "tiny" driver for ACPI button devices exposed by VMs to
guest kernels to send signals directly to init (Josh Triplett).
- Add a kernel parameter to disable ACPI BGRT on x86 (Alex Hung).
- Make the ACPI PCI host bridge and fan drivers use scnprintf() to
avoid potential buffer overflows (Takashi Iwai).
- Clean up assorted pieces of code:
* Reorder "asmlinkage" to make g++ happy (Alexey Dobriyan).
* Drop unneeded variable initialization (Colin Ian King).
* Add missing __acquires/__releases annotations (Jules Irenge).
* Replace list_for_each_safe() with list_for_each_entry_safe()
(chenqiwu)"
* tag 'acpi-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits)
ACPICA: Update version to 20200214
ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow
ACPI: fan: Use scnprintf() for avoiding potential buffer overflow
ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE
ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add()
ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init()
ACPI: EC: Consolidate event handler installation code
acpi/x86: ignore unspecified bit positions in the ACPI global lock field
acpi/x86: add a kernel parameter to disable ACPI BGRT
x86/acpi: make "asmlinkage" part first thing in the function definition
ACPI: list_for_each_safe() -> list_for_each_entry_safe()
ACPI: video: remove redundant assignments to variable result
ACPI: OSL: Add missing __acquires/__releases annotations
ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry
ACPI / AC: Cleanup DMI quirk table
ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC
ACPI: EC: Simplify acpi_ec_add()
ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers()
ACPI: EC: Avoid passing redundant argument to functions
ACPI: EC: Avoid printing confusing messages in acpi_ec_setup()
...
John Fastabend says:
====================
This series adds ALU32 signed and unsigned min/max bounds.
The origins of this work is to fix do_refine_retval_range() which before
this series clamps the return value bounds to [0, max]. However, this
is not correct because its possible these functions may return negative
errors so the correct bound is [*MIN, max]. Where *MIN is the signed
and unsigned min values U64_MIN and S64_MIN. And 'max' here is the max
positive value returned by this routine.
Patch 1 changes the do_refine_retval_range() to return the correct bounds
but this breaks existing programs that were depending on the old incorrect
bound. To repair these old programs we add ALU32 bounds to properly track
the return values from these helpers. The ALU32 bounds are needed because
clang realizes these helepers return 'int' type and will use jmp32 ops
with the return value. With current state of things this does little to
help 64bit bounds and with patch 1 applied will cause many programs to
fail verifier pass. See patch 5 for trace details on how this happens.
Patch 2 does the ALU32 addition it adds the new bounds and populates them
through the verifier. Design note, initially a var32 was added but as
pointed out by Alexei and Edward it is not strictly needed so it was
removed here. This worked out nicely.
Patch 3 notes that the refine return value can now also bound the 32-bit
subregister allowing better bouinds tracking in these cases.
Patches 4 adds a C test case to test_progs which will cause the verifier
to fail if new 32bit and do_refine_retval_range() is incorrect.
Patches 5 and 6 fix test cases that broke after refining the return
values from helpers. I attempted to be explicit about each failure and
why we need the change. See patches for details.
Patch 7 adds some bounds check tests to ensure bounds checking when
mixing alu32, alu64 and jmp32 ops together.
Thanks to Alexei, Edward, and Daniel for initial feedback it helped clean
this up a lot.
v2:
- rebased to bpf-next
- fixed tnum equals optimization for combining 32->64bits
- updated patch to fix verifier test correctly
- updated refine_retval_range to set both s32_*_value and s*_value we
need both to get better bounds tracking
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Clean up and rework the PM QoS API to simplify the code and
reduce the size of it (Rafael Wysocki).
- Fix a suspend-to-idle wakeup regression on Dell XPS13 9370
and similar platforms where the USB plug/unplug events are
handled by the EC (Rafael Wysocki).
- CLean up the intel_idle and PSCI cpuidle drivers (Rafael Wysocki,
Ulf Hansson).
- Extend the haltpoll cpuidle driver so that it can be forced to
run on some systems where it refused to load (Maciej Szmigiero).
- Convert several cpufreq documents to the .rst format and move the
legacy driver documentation into one common file (Mauro Carvalho
Chehab, Rafael Wysocki).
- Update several cpufreq drivers:
* Extend and fix the imx-cpufreq-dt driver (Anson Huang).
* Improve the -EPROBE_DEFER handling and fix unwanted CPU
overclocking on i.MX6ULL in imx6q-cpufreq (Anson Huang,
Christoph Niedermaier).
* Add support for Krait based SoCs to the qcom driver (Ansuel
Smith).
* Add support for OPP_PLUS to ti-cpufreq (Lokesh Vutla).
* Add platform specific intermediate callbacks support to
cpufreq-dt and update the imx6q driver (Peng Fan).
* Simplify and consolidate some pieces of the intel_pstate driver
and update its documentation (Rafael Wysocki, Alex Hung).
- Fix several devfreq issues:
* Remove unneeded extern keyword from a devfreq header file
and use the DEVFREQ_GOV_UPDATE_INTERNAL event name instead of
DEVFREQ_GOV_INTERNAL (Chanwoo Choi).
* Fix the handling of dev_pm_qos_remove_request() result (Leonard
Crestez).
* Use constant name for userspace governor (Pierre Kuo).
* Get rid of doc warnings and fix a typo (Christophe JAILLET).
- Use built-in RCU list checking in some places in the PM core to
avoid false-positive RCU usage warnings (Madhuparna Bhowmik).
- Add explicit READ_ONCE()/WRITE_ONCE() annotations to low-level
PM QoS routines (Qian Cai).
- Fix removal of wakeup sources to avoid NULL pointer dereferences
in a corner case (Neeraj Upadhyay).
- Clean up the handling of hibernate compat ioctls and fix the
related documentation (Eric Biggers).
- Update the idle_inject power capping driver to use variable-length
arrays instead of zero-length arrays (Gustavo Silva).
- Fix list format in a PM QoS document (Randy Dunlap).
- Make the cpufreq stats module use scnprintf() to avoid potential
buffer overflows (Takashi Iwai).
- Add pm_runtime_get_if_active() to PM-runtime API (Sakari Ailus).
- Allow no domain-idle-states DT property in generic PM domains (Ulf
Hansson).
- Fix a broken y-axis scale in the intel_pstate_tracer utility (Doug
Smythies).
-----BEGIN PGP SIGNATURE-----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=cBQd
-----END PGP SIGNATURE-----
Merge tag 'pm-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These clean up and rework the PM QoS API, address a suspend-to-idle
wakeup regression on some ACPI-based platforms, clean up and extend a
few cpuidle drivers, update multiple cpufreq drivers and cpufreq
documentation, and fix a number of issues in devfreq and several other
things all over.
Specifics:
- Clean up and rework the PM QoS API to simplify the code and reduce
the size of it (Rafael Wysocki).
- Fix a suspend-to-idle wakeup regression on Dell XPS13 9370 and
similar platforms where the USB plug/unplug events are handled by
the EC (Rafael Wysocki).
- CLean up the intel_idle and PSCI cpuidle drivers (Rafael Wysocki,
Ulf Hansson).
- Extend the haltpoll cpuidle driver so that it can be forced to run
on some systems where it refused to load (Maciej Szmigiero).
- Convert several cpufreq documents to the .rst format and move the
legacy driver documentation into one common file (Mauro Carvalho
Chehab, Rafael Wysocki).
- Update several cpufreq drivers:
* Extend and fix the imx-cpufreq-dt driver (Anson Huang).
* Improve the -EPROBE_DEFER handling and fix unwanted CPU
overclocking on i.MX6ULL in imx6q-cpufreq (Anson Huang,
Christoph Niedermaier).
* Add support for Krait based SoCs to the qcom driver (Ansuel
Smith).
* Add support for OPP_PLUS to ti-cpufreq (Lokesh Vutla).
* Add platform specific intermediate callbacks support to
cpufreq-dt and update the imx6q driver (Peng Fan).
* Simplify and consolidate some pieces of the intel_pstate
driver and update its documentation (Rafael Wysocki, Alex
Hung).
- Fix several devfreq issues:
* Remove unneeded extern keyword from a devfreq header file and
use the DEVFREQ_GOV_UPDATE_INTERNAL event name instead of
DEVFREQ_GOV_INTERNAL (Chanwoo Choi).
* Fix the handling of dev_pm_qos_remove_request() result
(Leonard Crestez).
* Use constant name for userspace governor (Pierre Kuo).
* Get rid of doc warnings and fix a typo (Christophe JAILLET).
- Use built-in RCU list checking in some places in the PM core to
avoid false-positive RCU usage warnings (Madhuparna Bhowmik).
- Add explicit READ_ONCE()/WRITE_ONCE() annotations to low-level PM
QoS routines (Qian Cai).
- Fix removal of wakeup sources to avoid NULL pointer dereferences in
a corner case (Neeraj Upadhyay).
- Clean up the handling of hibernate compat ioctls and fix the
related documentation (Eric Biggers).
- Update the idle_inject power capping driver to use variable-length
arrays instead of zero-length arrays (Gustavo Silva).
- Fix list format in a PM QoS document (Randy Dunlap).
- Make the cpufreq stats module use scnprintf() to avoid potential
buffer overflows (Takashi Iwai).
- Add pm_runtime_get_if_active() to PM-runtime API (Sakari Ailus).
- Allow no domain-idle-states DT property in generic PM domains (Ulf
Hansson).
- Fix a broken y-axis scale in the intel_pstate_tracer utility (Doug
Smythies)"
* tag 'pm-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (78 commits)
cpufreq: intel_pstate: Simplify intel_pstate_cpu_init()
tools/power/x86/intel_pstate_tracer: fix a broken y-axis scale
ACPI: PM: s2idle: Refine active GPEs check
ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE
PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there
PM / devfreq: Get rid of some doc warnings
PM / devfreq: Fix handling dev_pm_qos_remove_request result
PM / devfreq: Fix a typo in a comment
PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name
PM / devfreq: Remove unneeded extern keyword
PM / devfreq: Use constant name of userspace governor
ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late()
cpufreq: qcom: Add support for krait based socs
cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling
cpufreq: Use scnprintf() for avoiding potential buffer overflow
cpuidle: psci: Split psci_dt_cpu_init_idle()
PM / Domains: Allow no domain-idle-states DT property in genpd when parsing
PM / hibernate: Remove unnecessary compat ioctl overrides
PM: hibernate: fix docs for ioctls that return loff_t via pointer
Documentation: intel_pstate: update links for references
...
Its possible to have divergent ALU32 and ALU64 bounds when using JMP32
instructins and ALU64 arithmatic operations. Sometimes the clang will
even generate this code. Because the case is a bit tricky lets add
a specific test for it.
Here is pseudocode asm version to illustrate the idea,
1 r0 = 0xffffffff00000001;
2 if w0 > 1 goto %l[fail];
3 r0 += 1
5 if w0 > 2 goto %l[fail]
6 exit
The intent here is the verifier will fail the load if the 32bit bounds
are not tracked correctly through ALU64 op. Similarly we can check the
64bit bounds are correctly zero extended after ALU32 ops.
1 r0 = 0xffffffff00000001;
2 w0 += 1
2 if r0 > 3 goto %l[fail];
6 exit
The above will fail if we do not correctly zero extend 64bit bounds
after 32bit op.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158560430155.10843.514209255758200922.stgit@john-Precision-5820-Tower
Florian Fainelli