MCS_rate_2R[] does not used. Remove it.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_hal_get_hwreg() does not used with HW_VAR_RF_TYPE parameter.
Remove HW_VAR_RF_TYPE switch case in rtw_hal_get_hwreg and definition.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_hal_get_hwreg(..., HW_VAR_RF_TYPE,...) always return RF_1T1R value.
Replace the function call with RF_1T1R value and refactor HT_caps_handler().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_hal_get_hwreg(..., HW_VAR_RF_TYPE,...) always return RF_1T1R value.
Replace the function call with RF_1T1R value and refactor rtw_update_ht_cap().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_hal_get_hwreg(..., HW_VAR_RF_TYPE,...) always return RF_1T1R value.
Replace the function call with RF_1T1R value and refactor issue_assocreq().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_hal_get_hwreg(..., HW_VAR_RF_TYPE,...) always return RF_1T1R value.
Replace the function call with RF_1T1R value
and refactor rtw_get_cur_max_rate().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_hal_get_hwreg(..., HW_VAR_RF_TYPE,...) always return RF_1T1R value.
Replace the function call with RF_1T1R value
and refactor rtw_check_beacon_data().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_hal_get_hwreg(..., HW_VAR_RF_TYPE,...) always return RF_1T1R value.
Replace the function call with RF_1T1R value and refactor add_RATid().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DIV_ROUND_UP macro is shorter and look better than if-else construction.
DIV_ROUND_UP used in rtw_signal_stat_timer_hdl().
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove spaces after casts found by checkpatch.pl. In some cases,
remove returns after casts and place them on a single line.
Signed-off-by: Katie Dunne <kdunne@mail.ccsf.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Braces should be used on all arms of these statements (CHECK)..
Signed-off-by: Shiva Kerdel <shiva@exdev.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changed bit swifting operators to BIT macros (preferred),
This change will also solve the preferred space surrounding
the operator checks.
Signed-off-by: Shiva Kerdel <shiva@exdev.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a coding style issue where whitespace characters were missing
around some binary OR operators.
Signed-off-by: Kenneth Hsu <kennethhsu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When compiling the kernel without optimization, when using GCOV,
the lprocfs_stats_alloc_one() symbol is not properly exported to
other modules and causes the ptlrpc module to fail loading with
an unknown symbol. There is no reason to export the function
lprocfs_stats_alloc_one. The reason is due to the functions
lprocfs_stats_[un]lock being inline functions in a header file.
Lets untangle this mess and turn those inline functions
into real functions in a source file.
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8836
Reviewed-on: https://review.whamcloud.com/23773
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is race in the code of starting bl threads which leads to
thread number exceeds the maximum number when race happened, it
can also lead to duplicated thread name. This patch fixes the
race and cleanup the code a bit.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7330
Reviewed-on: http://review.whamcloud.com/17026
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
disconnect takes too long time if there are many locks to cancel.
besides the amount of time spent on each lock cancel, there is a
resched() in cfs_hash_for_each_relax(), i.e. disconnect or eviction
may take unexpectedly long time. While this patch only contains
the client side fixes the original fix covered changes to both
the server and client code to ensure proper disconnect handling.
Below details the change done on both the server and client so
people can examine the disconnect behavior with both source bases.
- do not cancel locks on disconnect_export;
- export will be left in obd_unlinked_exports list pinned by live
locks;
- new re-connects will created other non-conflicting exports;
- new locks will cancel obsolete locks on conflicts;
- once all the locks on the disconnected export will be cancelled,
the export will be destroyed on the last ref put;
- do not cancel in small portions, cancel all together in just 1
dedicated thread - use server side blocking thread for that;
- cancel blocked locks first so that waiting locks could proceed;
- take care about blocked waiting locks, so that they would get
cancelled quickly too;
- do not remove lock from waiting list on AST error before moving
it to elt_expired_locks list, because it removes it from export
list too; otherwise this blocked lock will not be cancelled
immediately on failed export;
- cancel lock instead of just destroy for failed export, to make
full cleanup, i.e. remove it from export list.
Signed-off-by: Vitaly Fertman <vitaly_fertman@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3031
Xyratex-bug-id: MRP-395 MRP-1366 MRP-1366
Reviewed-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com>
Reviewed-by: Alexey Lyashkov <Alexey_Lyashkov@xyratex.com>
Reviewed-on: http://review.whamcloud.com/5843
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ll_close_inode_openhandle() and ll_md_close() functions passed an
extra "obd_export *md_exp" parameter, but it turns out that all of the
callers already pass inode->i_sb->s_fs_info->lsi_llsbi->ll_md_exp in
one form or another, so it can just be extracted from "inode" directly
as needed.
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6627
Reviewed-on: http://review.whamcloud.com/14953
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Define osc_lru_reserve() and osc_lru_unreserve() to reserve LRU
slots in osc_io_write_iter_init() and unreserve them in fini();
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6271
Reviewed-on: http://review.whamcloud.com/16456
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A ldlm lock could be canceled simutaneously by ldlm bl thread and
cleanup_resource(). In this case, only one side will win the race
and the other side should wait for the work to complete. Eviction
on group lock is now well supported.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6271
Reviewed-on: http://review.whamcloud.com/16456
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In lov_io_iter_init(), if cl_io_iter_init() against sub io fails,
it should call cl_io_iter_fini() to cleanup leftover information;
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6271
Reviewed-on: http://review.whamcloud.com/16456
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the no longer needed assert in the function
osc_cache_truncate_start(). The assertion in
osc_object_prune() will become faulty with upcoming
changes. The reason this will become a problem is
that there may exist freeing pages in object's
radix tree at the time of osc_object_prune(), which
causes failure at the assertion of (osc->oo_npages == 0).
This patch prevents that problem from happening.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6271
Reviewed-on: http://review.whamcloud.com/16456
Reviewed-on: http://review.whamcloud.com/16727
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ll_setattr_raw(), after op_data->op_attr has been copied, the attr
is updated and op_data->op_attr does not get updated afterward.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6813
Reviewed-on: http://review.whamcloud.com/16462
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Truncate and write can happen at the same time, so that a file can
be set modified even though the file is not restored from released
state, and ll_hsm_state_set() is not applicable for the file, and
it will return error in this case, we'd lower the error message level
in this case.
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6817
Reviewed-on: http://review.whamcloud.com/15541
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In Linux kernel 4.9-rc1, the function ib_get_dma_mr()
was removed and a second parameter was added to ib_alloc_pd().
As this broke the building of the ko2iblnd module in
staging, the Kconfig for LNet has marked ko2iblnd as broken
and stopped building it.
This patch fixes this breakage by:
- Removing the BROKEN tag from lnet/Kconfig.
- Make it so the module parameter map_on_demand can no longer be
zero (we have to configure FMR/FastReg pools; it can no longer be
off).
- No longer try to use the global DMA memory region, but make use
of the FMR/FastReg pool for all RDMA Tx operations.
- Everywhere we are using the device DMA mr to derive the
L-key for non-registered memory regions, use the
pd->local_dma_lkey value instead.
- Make the default map_on_demand = 256. This will allow nodes with
this patch to still connected to older nodes without this patch
and FMR/FastReg turned off. When FMR/FastReg is turned off, we
use 256 as the max frags so the two sides will still be able to
communicate and work.
- Fix a mistake with BUILD_BUG_ON calls in o2iblnd.c which caused
compiling to fail.
Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-9026
Reviewed-on: https://review.whamcloud.com/#/c/24931/
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes extra parentheses around function arguments. Issue
detected and resolved using the following coccinelle script:
@@
expression e;
identifier f;
@@
f(...,
-(
e
-)
,...)
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix for "WARNING: Avoid multiple line dereference - prefer
'mc_msi_domain->host_data'" found by checkpatch.pl in
bus/irq-gic-v3-its-fsl-mc-msi.c.
Signed-off-by: Lucian Zala <zala.lucian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
function prototype argument 'struct vb_device_info *' and 'unsigned
long' should also have an identifier name.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add braces to instances of if-statements found by checkpatch.pl
to conform to kernel style.
Signed-off-by: Katie Dunne <kdunne@mail.ccsf.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
add braces around if statment to fix the checkpatch issue, braces {}
should be used on all arms of this statement.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows making some of the actual arrays const.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Running make C=1 M=drivers/staging/fbtft reports warnings about conversion
from __be16 to unsigned short. Change the type of the variables being
assigned into __be16 to remove those warnings.
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__be16 type variables should be used with return value of macro
cpu_to_be16()
Signed-off-by: Julián de Gortari <kiototeko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove blank line before closing brace to fix the checkpatch
issue blank lines aren't necessary before a close brace '}'.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Indent code to match alignment with open parentheses, to
fix the checkpatch issue alignment should match open parenthesis.
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return value of strlcpy() is not checked. Name string is silently
truncated if longer that SPI_NAME_SIZE, whilst not detrimental to
the program logic it would be nice to notify the user. Module is
currently quite verbose, adding extra pr_warn() calls will not overly
impact this verbosity.
Check return value from call to strlcpy(). If source string is
truncated call pr_warn() to notify user.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current call to strncmp() uses a magic number. There is a compile
time constant defined for this buffer, included and used already at
other sites in the file.
Remove magic number. Replace with pre-existing compile time constant.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Module copies a user supplied string (module parameter) into a buffer
using strncpy() and does not check that the buffer is null terminated.
Replace call to strncpy() with call to strlcpy() ensuring that the
buffer is null terminated.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed initialisation of a varible if it is immediately reassigned.
Changes were made using Coccinelle.
@@
type T;
constant C;
expression e;
identifier i;
@@
T i
- = C
;
i = e;
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The icmp6_checksum was returning an invalid data type as the expected type
is __sum16. For returning such data type, icmp6_checksum, now, is using
the kernel functions for computing the checksum.
Here, the sparse message:
drivers/staging/gdm724x/gdm_lte.c:311:39: warning: incorrect type in assignment (different base types)
drivers/staging/gdm724x/gdm_lte.c:311:39: expected restricted __sum16 [addressable] [assigned] [usertype] icmp6_cksum
drivers/staging/gdm724x/gdm_lte.c:311:39: got int
Signed-off-by: Javier Rodriguez <jrodbar@yahoo.es>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch warning "Avoid multiple line dereference"
using a pointer variable to avoid line wrap.
Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checkpatch emits WARNING: Block comments use a trailing */ on a
separate line. Offending comments are commenting variables within
the main data structure of s626 driver. We can move these comments
to kernel doc format with the benefit of clearing the warning and
improving the documentation for the driver.
Remove comments on structure members. Add original comments to the
head of the structure definition in kernel doc format.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "jr3_pci" driver currently uses the `iobase` member of its private
device data `struct jr3_pci_dev_private` to store a pointer to its
ioremapped register region. Use the `mmio` member of the `struct
comedi_device` to store this instead, and remove the `iobase` member.
The `iobase` member was of type `struct jr3_t __iomem *`, with the
board's complicated register layout described by `struct jr3_t`. The
`mmio` member is a generic `void __iomem *`, so its value needs
converting to a `struct jr3_t __iomem *` for our purposes.
Change the clean-up in `jr3_pci_detach()` to call `comedi_pci_detach()`
instead of `comedi_pci_disable()`, as that will iounmap `dev->mmio` for
us.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local function `set_transforms` has a parameter of type `struct
jr3_pci_transform`. This has a size 32 bytes, which is quite large for
passing around in a function call. Change it to use type `const struct
jr3_pci_transform *`. (In practice, it is probably inlined by the
compiler anyway, but doing this seems to save a few bytes.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `range` member of `struct jr3_pci_subdev_private` is an array of a
tag-less `struct` type whose layout is similar to `struct
comedi_lrange`. Both `struct` types end with a member also called
`range`. In the case of tag-less `struct` type, it is a single `struct
comedi_krange`. In the case of `struct comedi_lrange`, it is a flexible
array of `struct comedi_krange`.
Elements of the `range` array member in `struct jr3_pci_subdev_private`
are pointed to by elements of the `range_table_list` array member, which
are of type `const struct comedi_lrange *`. This requires some dodgy
type casting.
To avoid the dodgy type casting, change the element type of the `range`
member of `struct jr3_pci_subdev_private` to be a new type `union
jr3_pci_single_range`. This contains a member `l` of type `struct
comedi_lrange`, and an array member `_reserved` that is large enough to
encompass the `struct comedi_lrange` plus a single `struct
comedi_krange`. It is the same size as the previous type. Accesses to
`spriv->range[i].length` and `spriv->range[i].range` are replaced with
`spriv->range[i].l.length` and `spriv->range[i].l.range[0]` respectively
(where `spriv` is a `struct jr3_pci_subdev_private *`, and `i` is an
array index). Type-casted pointers to `spriv->range[i]` are replaced
with pointers to `spriv->range[i].l`, which do not require the type
casts. Since we defined a new type, we can define local variables of
the corresponding pointer type to shorten some lines of code. This is
made use of in `jr3_pci_alloc_spriv()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>