drivers/staging/media/atomisp/platform/clock/vlv2_plat_clock.c:248:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/media/atomisp/i2c/ov2722.c:1352:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/media/atomisp/i2c/ov5693/ov5693.c:2066:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/media/atomisp/i2c/lm3554.c:986:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/media/atomisp/i2c/mt9m114.c:1946:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/media/atomisp/i2c/gc0310.c:1470:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/media/atomisp/i2c/imx/imx.c:2486:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/media/atomisp/i2c/gc2235.c:1208:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/media/atomisp/i2c/ap1302.c:1250:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for the Intel IPU v2 as found on Android and IoT
Baytrail-T and Baytrail-CR platforms (those with the IPU PCI mapped). You
will also need the firmware files from your device (Android usually puts
them into /etc) - or you can find them in the downloadable restore/upgrade
kits if you blew them away for some reason.
It may be possible to extend the driver to handle the BYT/T windows
platforms such as the ASUS T100TA. These platforms don't expose the IPU via
the PCI interface but via ACPI buried in the GPU description and with the
camera information somewhere unknown so would need a platform driver
interface adding to the codebase *IFF* the firmware works on such devices.
To get good results you also need a suitable support library such as
libxcam. The camera is intended to be driven from Android so it has a lot of
features that many desktop apps don't fully spport.
In theory all the pieces are there to build it with -DISP2401 and some
differing files to get CherryTrail/T support, but unifying the drivers
properlly is a work in progress.
The IPU driver represents the work of a lot of people within Intel over many
years. It's historical goal was portability rather than Linux upstream. Any
queries about the upstream aimed driver should be sent to me not to the
original authors.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed unnecessary variable and used instead the parameter
that was already defined
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now, when the condition inside the for is fulfilled, I return the result,
instead of checking afterwards whether the counter has reached or not
the end of the list.
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Found by checkpatch.pl
Logical conditions are on the next line, useless parentheses present
Clean up the if tests by
* Put logical conditions on the previous line
* Line up the tests
Signed-off-by: Sreya Mittal <sreyamittal5@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Align next line of print statements
to the right of open parentheses.
Signed-off-by: Sreya Mittal <sreyamittal5@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch warning on dgnc_cls.c: CHECK usleep_range is preferred
over udelay. udelay(t) in function cls_uart_init is within non-atomic
context and can be safely replaced by usleep_range(t, t + delta) where
delta is t (as t is between 10 and 20 microseconds).
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per the Linux kernel coding style guidelines, using typedef for a
structure type is not recommended. Hence, occurences of typedefs have
been removed. To find the occurences of the structures grep was used
and no uses were found.
Coccinelle script:
@r1@
type T;
@@
typedef struct { ... } T;
@script:python c1@
T2;
T << r1.T;
@@
coccinelle.T2=T;
@@
type r1.T;
identifier c1.T2;
@@
-typedef
struct
+ T2
{ ... }
-T
;
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a sanity check that wid.val has been allocated, fixes a null
pointer deference on stamac when calling ether_add_copy.
Detected by CoverityScan, CID#1369537 ("Dereference null return value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check for result < 0 is redundant because at that point result
is always zero, hence we can remove this check and the netdev_err
message.
Detected by CoverityScan, CID#1357147 ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for the SH1106 OLED controller chip.
It's similar to the SSD1306, however it supports only a subset of
commands and the internal video memory has a different width.
Major differences:
- Internal video memory has a width of 132 pixels
- Only a subset of commands is supported
- Only page addressing mode is supported, no support for vertical and
horizontal addressing
- SPI frequency limited to 2 MHz according to the datasheet
Successfully tested with a 1.3" OLED display with this chip and
SPI interface.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merged two if conditionals into a single one, since they had exactly
the same condition.
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to usbpipe.c to fix space and char limit warning found by
checkpatch tool.
Signed-off-by: Jitendra Khasdev <jkhasdev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to define PAGE_SIZE in the vchiq driver
so remove the define from vchiq_pagelist.h .
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vchiq_2835_arm.c uses functions and macros like put_page() or
PAGE_ALIGN(). So we better include the necessary header.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Including those headers is unnecessary, so we better remove them.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unnecessary parentheses are removed as reported by checkpatch.pl
to make coder nicer and to improve readability.
Also coding style is improved as it's often nicer to read if
&(foo[0]) is converted to foo like:
memcpy(&(ap->bssid[0]), &(ap_info->bssid[0]), ETH_ALEN);
memcpy(ap->bssid, ap_info->bssid, ETH_ALEN);
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Relational and logical operators evaluate to either true or false.
Lines with ternary operators were found using coccinelle script. In a
few cases using logical && operator would suffice. Hence those were
changed to improve readability.
Coccinelle Script:
@r@
expression A,B;
symbol true,false;
binary operator b = {==,!=,&&,||,>=,<=,>,<};
@@
- (A b B) ? true : false
+ A b B
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes coding style issue of having block comments using a
trailing */ on a separate line, warning as issued by checkpatch
Signed-off-by: Chetan Sethi <cpsethi369@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes coding style issue of using __func__ instead of gcc
specific __FUNCTION__, warning as issued by checkpatch
Signed-off-by: Chetan Sethi <cpsethi369@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes error of enclosing complex macro value in parentheses,
error as issued by checkpatch
Signed-off-by: Chetan Sethi <cpsethi369@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes warning of line over 80 characters, as issued by
checkpatch.pl
Signed-off-by: Chetan Sethi <cpsethi369@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add spaces around binary operator '&' in order to
increase the readability of the code.
Signed-off-by: Georgiana Rodica Chelu <georgiana.chelu93@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was reported by checkpatch.pl
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was reported by checkpatch.pl
Signed-off-by: Alexandru Jercaianu <alex.jercaianu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the name of the camera driver as displayed
by the Kconfig to match the audio driver style.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The audio driver description contains a reference to a card.
Since this is for built in audio, drop the card reference
from the description.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bcm2835-camera driver is part of v04_services, so it makes
sense for it to be located under vc04_services to make
configuration clearer.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bcm2835-audio driver is part of v04_services, so it makes
sense for it to be located under vc04_services to make
configuration clearer.
Signed-off-by: Michael Zoran <mzoran@crowfest.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed unnecessary blank lines after open brace and before closed
braces, to fix the check patch issue. Also removed braces which were not
required.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replaced NULL comparison with pCurrentDviCtrl->pfnInit. This patch fixes
the following checkpatch issue:
CHECK: Comparison to NULL could be written "pCurrentDviCtrl->pfnInit"
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed multiple blank lines, which are not required. This patch fixes
the following check patch issues:
CHECK: Please don't use multiple blank lines
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added pinit_param as the identifier to function definition argument
struct initchip_param and this patch fixes the checkpatch issue.
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Line over 80 characters are split to fix the following checkpatch issue:
WARNING: line over 80 characters
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added braces around if statement. This patch fixes the following
checkpatch issue:
CHECK: braces {} should be used on all arms of this statement
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kbuild test robot