x86_64 jumps to whatever is written in "initial_code" symbol,
instead of a fixed address. Do it for i386 too. It will allow us
to integrate more of the smp boot code.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
i386 and x86_64 used two different schemes for maintaining the gdt.
With this patch, x86_64 initial gdt table is defined in a .c file,
same way as i386 is now. Also, we call it "gdt_page", and the descriptor,
"early_gdt_descr". This way we achieve common naming, which can allow for
more code integration.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
call x86_64's init_rsp stack_start, just as i386 does.
Put a zeroed stack segment for consistency. With this,
we can eliminate one ugly ifdef in smpboot.c.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Making a variable page-aligned by using
__attribute__((section(".data.page_aligned"))) is fragile because if
sizeof(variable) is not also a multiple of page size, it leaves
variables in the remainder of the section unaligned.
This patch introduces two new qualifiers, __page_aligned_data and
__page_aligned_bss to set the section *and* the alignment of
variables. This makes page-aligned variables more robust because the
linker will make sure they're aligned properly. Unfortunately it
requires *all* page-aligned data to use these macros...
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch moves the reserve_crashkernel() to setup.c and removes the
architecture-specific version. Both versions were more or less the same.
I tested it on both x86-64 and i386, with CONFIG_KEXEC on and off (so
that it compiles).
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: yhlu.kernel@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Someone could write 0 bytes to /proc/sgi_uv/ptc_statistics,
causing
optstr[count - 1] = '\0';
to write to who-knows-where.
(Andi Kleen noticed this need from a patch I sent for
similar code in the ia64 world (sn2_ptc_proc_write()).)
(count less than zero is not possible here, as count is unsigned)
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
v6: 6/19 close the security hole in uv_ptc_proc_write())
> Found a potential security hole while doing that:
> static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user,
> size_t count, loff_t *data)
> if (copy_from_user(optstr, user, count))
> return -EFAULT;
>
> is count guaranteed to never be larger than 64?
is fixed below.
It adds tlb_uv.o to the Makefile.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: mingo@elte.hu
Signed-off-by: Ingo Molnar <mingo@elte.hu>
physid_mask_of_physid() causes a huge stack (12k) to be created if the
number of APICS is large. Replace physid_mask_of_physid() with a
new function that does not create large stacks. This is a problem only
on large x86_64 systems.
this paves the way to increase MAX_APICS.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: linux-mm@kvack.org
Cc: mingo@elte.hu
Cc: tglx@linutronix.de
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
arch/x86/kernel/tlb_uv.c: In function ‘uv_table_bases_init':
arch/x86/kernel/tlb_uv.c:612: error: ‘bau_tabsp' undeclared (first use in this function)
arch/x86/kernel/tlb_uv.c:612: error: (Each undeclared identifier is reported only once
arch/x86/kernel/tlb_uv.c:612: error: for each function it appears in.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
TLB shootdown for SGI UV.
v1: 6/2 original
v2: 6/3 corrections/improvements per Ingo's review
v3: 6/4 split atomic operations off to a separate patch (Jeremy's review)
v4: 6/12 include <mach_apic.h> rather than <asm/mach-bigsmp/mach_apic.h>
(fixes a !SMP build problem that Ingo found)
fix the index on uv_table_bases[blade]
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
TLB shootdown for SGI UV.
Depends on patch (in tip/x86/irq):
x86-update-macros-used-by-uv-platform.patch Jack Steiner May 29
This patch provides the ability to flush TLB's in cpu's that are not on
the local node. The hardware mechanism for distributing the flush
messages is the UV's "broadcast assist unit".
The hook to intercept TLB shootdown requests is a 2-line change to
native_flush_tlb_others() (arch/x86/kernel/tlb_64.c).
This code has been tested on a hardware simulator. The real hardware
is not yet available.
The shootdown statistics are provided through /proc/sgi_uv/ptc_statistics.
The use of /sys was considered, but would have required the use of
many /sys files. The debugfs was also considered, but these statistics
should be available on an ongoing basis, not just for debugging.
Issues to be fixed later:
- The IRQ for the messaging interrupt is currently hardcoded as 200
(see UV_BAU_MESSAGE). It should be dynamically assigned in the future.
- The use of appropriate udelay()'s is untested, as they are a problem
in the simulator.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch uses reserve_bootmem_generic() instead of reserve_bootmem()
to reserve the crashkernel memory on x86_64. That's necessary for NUMA
machines, see 00212fef81:
[PATCH] Fix kdump Crash Kernel boot memory reservation for NUMA machines
This patch will fix a boot memory reservation bug that trashes memory on
the ES7000 when loading the kdump crash kernel.
The code in arch/x86_64/kernel/setup.c to reserve boot memory for the crash
kernel uses the non-numa aware "reserve_bootmem" function instead of the
NUMA aware "reserve_bootmem_generic". I checked to make sure that no other
function was using "reserve_bootmem" and found none, except the ones that
had NUMA ifdef'ed out.
I have tested this patch only on an ES7000 with NUMA on and off (numa=off)
in a single (non-NUMA) and multi-cell (NUMA) configurations.
Signed-off-by: Amul Shah <amul.shah@unisys.com>
Looks-good-to: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The switch-back to reserve_bootmem() was accidentally introduced in
5c3391f9f7 when adding the BOOTMEM_EXCLUSIVE
parameter.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds a 'flags' parameter to reserve_bootmem_generic() like it
already has been added in reserve_bootmem() with commit
72a7fe3967.
It also changes all users to use BOOTMEM_DEFAULT, which doesn't effectively
change the behaviour. Since the change is x86-specific, I don't think it's
necessary to add a new API for migration. There are only 4 users of that
function.
The change is necessary for the next patch, using reserve_bootmem_generic()
for crashkernel reservation.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix setup.c printk format warning:
linux-next-20080605/arch/x86/kernel/setup.c: In function 'setup_per_cpu_areas':
linux-next-20080605/arch/x86/kernel/setup.c:173: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ssize_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
sparse mutters:
arch/x86/mm/numa_64.c:195:27: warning: symbol 'end_pfn' shadows an earlier one
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
plat_node_bdata, cmdline, nodemap_addr, nodemap_size are local to
numa_64.c. Make them static
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Without this patch, my link fails with:
arch/x86/kernel/built-in.o(.cpuinit.text+0x3c6e): In function `get_local_pda':
: undefined reference to `_cpu_pda'
arch/x86/kernel/built-in.o(.cpuinit.text+0x3cd1): In function `get_local_pda':
: undefined reference to `after_bootmem'
arch/x86/kernel/built-in.o(.cpuinit.text+0x3cec): In function `get_local_pda':
: undefined reference to `_cpu_pda'
make[2]: *** [.tmp_vmlinux1] Error 1
Caused by commit 766da892634694f795b18b9538407816896fc470
x86: remove static boot_cpu_pda array v2
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Remove the boot_cpu_pda array and pointer table from the data section.
Allocate the pointer table and array during init. do_boot_cpu()
will reallocate the pda in node local memory and if the cpu is being
brought up before the bootmem array is released (after_bootmem = 0),
then it will free the initial pda. This will happen for all cpus
present at system startup.
This removes 512k + 32k bytes from the data section.
For inclusion into sched-devel/latest tree.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ sched-devel/latest .../mingo/linux-2.6-sched-devel.git
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Consolidate node_to_cpumask operations and remove the 256k
byte node_to_cpumask_map. This is done by allocating the
node_to_cpumask_map array after the number of possible nodes
(nr_node_ids) is known.
* Debug printouts when CONFIG_DEBUG_PER_CPU_MAPS is active have
been increased. It now shows faults when calling node_to_cpumask()
and node_to_cpumask_ptr().
For inclusion into sched-devel/latest tree.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ sched-devel/latest .../mingo/linux-2.6-sched-devel.git
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Restore the nodenumber field in the x86_64 pda. This field is slightly
different than the x86_cpu_to_node_map mainly because it's a static
indication of which node the cpu is on while the cpu to node map is a
dyanamic mapping that may get reset if the cpu goes offline. This also
simplifies the numa_node_id() macro.
For inclusion into sched-devel/latest tree.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ sched-devel/latest .../mingo/linux-2.6-sched-devel.git
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Introduce a new PER_CPU macro called "EARLY_PER_CPU". This is
used by some per_cpu variables that are initialized and accessed
before there are per_cpu areas allocated.
["Early" in respect to per_cpu variables is "earlier than the per_cpu
areas have been setup".]
This patchset adds these new macros:
DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)
EXPORT_EARLY_PER_CPU_SYMBOL(_name)
DECLARE_EARLY_PER_CPU(_type, _name)
early_per_cpu_ptr(_name)
early_per_cpu_map(_name, _idx)
early_per_cpu(_name, _cpu)
The DEFINE macro defines the per_cpu variable as well as the early
map and pointer. It also initializes the per_cpu variable and map
elements to "_initvalue". The early_* macros provide access to
the initial map (usually setup during system init) and the early
pointer. This pointer is initialized to point to the early map
but is then NULL'ed when the actual per_cpu areas are setup. After
that the per_cpu variable is the correct access to the variable.
The early_per_cpu() macro is not very efficient but does show how to
access the variable if you have a function that can be called both
"early" and "late". It tests the early ptr to be NULL, and if not
then it's still valid. Otherwise, the per_cpu variable is used
instead:
#define early_per_cpu(_name, _cpu) \
(early_per_cpu_ptr(_name) ? \
early_per_cpu_ptr(_name)[_cpu] : \
per_cpu(_name, _cpu))
A better method is to actually check the pointer manually. In the
case below, numa_set_node can be called both "early" and "late":
void __cpuinit numa_set_node(int cpu, int node)
{
int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
if (cpu_to_node_map)
cpu_to_node_map[cpu] = node;
else
per_cpu(x86_cpu_to_node_map, cpu) = node;
}
* Add a flag "arch_provides_topology_pointers" that indicates pointers
to topology cpumask_t maps are available. Otherwise, use the function
returning the cpumask_t value. This is useful if cpumask_t set size
is very large to avoid copying data on to/off of the stack.
* The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while
the non-debug case has been optimized a bit.
* Remove an unreferenced compiler warning in drivers/base/topology.c
* Clean up #ifdef in setup.c
For inclusion into sched-devel/latest tree.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ sched-devel/latest .../mingo/linux-2.6-sched-devel.git
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Increase the limit of NR_CPUS to 4096 and introduce a boolean
called "MAXSMP" which when set (e.g. "allyesconfig"), will set
NR_CPUS = 4096 and NODES_SHIFT = 9 (512).
* Changed max setting for NODES_SHIFT from 15 to 9 to accurately
reflect the real limit.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Mike Travis wrote:
> Ingo Molnar wrote:
>> * Mike Travis <travis@sgi.com> wrote:
>>
>>> [Ingo - please replace "PATCH 07/11" with this one.]
>>>
>>> * Remove 544k bytes from the kernel by removing the boot_cpu_pda
>>> array from the data section and allocating it during startup.
>>>
>>> Fixed panic in setup_per_cpu_areas when HOTPLUG_CPU not set.
>>>
>>> For inclusion into sched-devel/latest tree.
>> sched-devel.git randconfig testing found another crash with your queue:
>>
>> [ 0.111060] Brought up 1 CPUs
>> [ 0.111986] Total of 1 processors activated (4022.73 BogoMIPS).
>> [ 0.112987] Testing NMI watchdog ... <1>BUG: unable to handle kernel NULL pointer dereference at 0000000000000040
>> [ 0.114982] IP: [<ffffffff8180d4a0>] check_nmi_watchdog+0xb0/0x210
>> [ 0.114982] PGD 0
>> [ 0.114982] Oops: 0000 [1] SMP
>> [ 0.114982] CPU 0
>> [............]
>>
>> http://redhat.com/~mingo/misc/config-Mon_Apr_28_23_25_25_CEST_2008.bad
>> http://redhat.com/~mingo/misc/log-Mon_Apr_28_23_25_25_CEST_2008.bad
>>
>> Ingo
>
> Hi Ingo,
>
> I need a bit more information on your hardware configuration. Building a
> kernel with the above config file started up fine on both the Intel and AMD
> boxes.
>
> Based on the above output it looks like it might be a UP machine?
...
Ok, I think I found it. In check_nmi_watchdog():
for (cpu = 0; cpu < NR_CPUS; cpu++)
prev_nmi_count[cpu] = cpu_pda(cpu)->__nmi_count;
As I mentioned it works fine on both of my systems so could you try it out?
Thanks!
Mike
--
* Change function check_nmi_watchdog() to use nr_cpu_ids instead of NR_CPUS.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ sched-devel/latest .../mingo/linux-2.6-sched-devel.git
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
also make bus_numa work even if ACPI_NUMA is not defined.
don't call pxm_to_node again, and use node directly.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
a numa system (with multi HT chains) may return node without ram. Aka it
is not online. Try to get an online node, otherwise return -1.
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Some HP laptops have a problem with their DSDT reporting as
HP/SB400/10000, which includes some code which overrides all temperature
trip points to 16C if the INTIN2 input of the I/O APIC is enabled. This
input is incorrectly designated the ISA IRQ 0 via an interrupt source
override even though it is wired to the output of the master 8259A and
INTIN0 is not connected at all. So far two models have been identified,
namely nx6125 and nx6325.
Use a knob provided by the I/O APIC interrupt registration code to
abandon any attempts to route IRQ 0 through the I/O APIC for these
systems.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As discovered recently some systems exhibit problems when the 8254 timer
IRQ is routed through the I/O APIC. These problems do not affect the
timer IRQ itself and therefore cannot be detected when the correctness of
operation of the interrupt is verified in check_timer(). Therefore the
I/O APIC path of the timer IRQ has to be disabled entirely.
This is a change that lets platforms ask for the timer IRQ not to be
registered in the I/O APIC interrupt tables. The local APIC and ExtINTA
paths are unaffected. This request is only taken into account for ACPI
platforms as MP table systems seem unaffected so far.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
"Maciej W. Rozycki" <macro@linux-mips.org> said:
> Given X86_64 selects X86_LOCAL_APIC I am not sure the redundancy seen
>above does not actually obscure the logic behind... I think:
>
> depends on X86_LOCAL_APIC && !X86_VISWS
>
>would be clearer and get the same.
Suggested-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
v2: seperate "fix for compiling when MPPARSE is not set" to another patch
make X86_MPPARSE to be selectable only when acpi is set and
X86_MPPARSE will be set if acpi is not set.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
if the system doesn't have ioapic, we don't need to store entries for mptable
update
also let mp_config_acpi_gsi not call func in mpparse
so later could decouple mpparse with acpi more easily
Reported-by: Daniel Exner <dex@dragonslave.de>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Exner <dex@dragonslave.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
1. let 64bit support 88 and e801 too
2. introduce default_machine_specific_memory_setup, and reuse it
for voyager
v2: fix 64 bit compiling
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
seperate SRAT finding and parsing from get_memcfg_from_srat,
and let getmemcfg_from_srat only handle array from previous step.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
we already have summit and etc depends on genericarch,
so use genericarch only.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
so don't punish all other cpus without that problem when init highmem
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
and make 32-bit resource registration more like 64 bit.
also move probe_roms back to setup_32.c
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because of the size limits of struct boot_params (zero page), the
maximum number of E820 memory map entries can be passed to kernel is
128. As pointed by Paul Jackson, there is some machine produced by SGI
with so many nodes that the number of E820 memory map entries is more
than 128. To enabling Linux kernel on these system, a new setup data
type named SETUP_E820_EXT is defined to pass additional memory map
entries to Linux kernel.
This patch is based on x86/auto-latest branch of git-x86 tree and has
been tested on x86_64 and i386 platform.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
