This patch fixes the following section mismatch:
<-- snip -->
...
WARNING: vmlinux.o(.text+0x3b641c): Section mismatch in reference from the function .pmac_ide_setup_device() to the function .init.text:.pmac_ide_setup_dma()
...
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
After commit 7267c33774
wait_drive_not_busy() can become static again.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
- ide_scan_pcibus() can become static
- instead of ide_scan_pci() we can use ide_scan_pcibus() directly
in module_init()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
ide_dma_on can be unexported.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To avoid confusion between 'built-in' drivers and 'on-board'
controllers, consistently use the term 'on-board' for controllers.
Minor line-wrapping improvements in descriptions for config options.
[ Bart: thanks to Jan for 'built-in'->'on-board' suggestion ]
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Commit cbb010c180
ide: drop 'initializing' argument from ide_register_hw()
* Rename init_hwif_data() to ide_init_port_data() and export it.
* For all users of ide_register_hw() with 'initializing' argument set
hwif->present and hwif->hold are always zero so convert these host
drivers to use ide_find_port()+ide_init_port_data()+ide_init_port_hw()
instead (also no need for init_hwif_default() call since the setup
done by it gets over-ridden by ide_init_port_hw() call).
* Drop 'initializing' argument from ide_register_hw().
introduced the usage of a hwif variable, but forgot to declare the actual
variable.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (24 commits)
pci: allow multiple calls to pcim_enable_device()
Blackfin pata-bf54x driver: fix compiling bug - no ata_port struct in struct ata_device any more
Blackfin pata-bf54x driver: should cover all possible interrupt sources
Blackfin pata-bf54x driver: Add debug information
Blackfin pata-bf54x driver: Remove obsolete PM function
pata_sl82c105: dual channel support
ata_piix.c: make piix_merge_scr() static
sata_nv: fix for completion handling
sata_mv: Remove PCI dependency
sata_mv ncq Comments and version bump
sata_mv ncq Remove post internal cmd op
sata_mv ncq Enable NCQ operation
sata_mv ncq Introduce per-tag SG tables
ata_piix: IDE mode SATA patch for Intel ICH10 DeviceID's
ahci: RAID mode SATA patch for Intel ICH10 DeviceID's
sata_mv ncq Use DMA memory pools for hardware memory tables
sata_mv ncq Restrict max sectors to 8-bits on GenII NCQ
sata_mv ncq Ignore response status LSB on NCQ
sata_mv ncq Use hqtag instead of ioid
sata_mv ncq Add want ncq parameter for EDMA configuration
...
* 'audit.b46' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
[AUDIT] Add uid, gid fields to ANOM_PROMISCUOUS message
[AUDIT] ratelimit printk messages audit
[patch 2/2] audit: complement va_copy with va_end()
[patch 1/2] kernel/audit.c: warning fix
[AUDIT] create context if auditing was ever enabled
[AUDIT] clean up audit_receive_msg()
[AUDIT] make audit=0 really stop audit messages
[AUDIT] break large execve argument logging into smaller messages
[AUDIT] include audit type in audit message when using printk
[AUDIT] do not panic on exclude messages in audit_log_pid_context()
[AUDIT] Add End of Event record
[AUDIT] add session id to audit messages
[AUDIT] collect uid, loginuid, and comm in OBJ_PID records
[AUDIT] return EINTR not ERESTART*
[PATCH] get rid of loginuid races
[PATCH] switch audit_get_loginuid() to task_struct *
Changes the ANOM_PROMISCUOUS message to include uid and gid fields,
making it consistent with other AUDIT_ANOM_ messages and in the
format the userspace is expecting.
Signed-off-by: Klaus Heinrich Kiwi <klausk@br.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com>
some printk messages from the audit system can become excessive. This
patch ratelimits those messages. It was found that messages, such as
the audit backlog lost printk message could flood the logs to the point
that a machine could take an nmi watchdog hit or otherwise become
unresponsive.
Signed-off-by: Eric Paris <eparis@redhat.com>
Complement va_copy() with va_end().
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kernel/audit.c: In function 'audit_log_start':
kernel/audit.c:1133: warning: 'serial' may be used uninitialized in this function
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Disabling audit at runtime by auditctl doesn't mean that we can
stop allocating contexts for new processes; we don't want to miss them
when that sucker is reenabled.
(based on work from Al Viro in the RHEL kernel series)
Signed-off-by: Eric Paris <eparis@redhat.com>
generally clean up audit_receive_msg() don't free random memory if
selinux_sid_to_string fails for some reason. Move generic auditing
to a helper function
Signed-off-by: Eric Paris <eparis@redhat.com>
Some audit messages (namely configuration changes) are still emitted even if
the audit subsystem has been explicitly disabled. This patch turns those
messages off as well.
Signed-off-by: Eric Paris <eparis@redhat.com>
execve arguments can be quite large. There is no limit on the number of
arguments and a 4G limit on the size of an argument.
this patch prints those aruguments in bite sized pieces. a userspace size
limitation of 8k was discovered so this keeps messages around 7.5k
single arguments larger than 7.5k in length are split into multiple records
and can be identified as aX[Y]=
Signed-off-by: Eric Paris <eparis@redhat.com>
Currently audit drops the audit type when an audit message goes through
printk instead of the audit deamon. This is a minor annoyance in
that the audit type is no longer part of the message and the information
the audit type conveys needs to be carried in, or derived from the
message data.
The attached patch includes the type number as part of the printk.
Admittedly it isn't the type name that the audit deamon provides but I
think this is better than dropping the type completely.
Signed-pff-by: John Johansen <jjohansen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
If we fail to get an ab in audit_log_pid_context this may be due to an exclude
rule rather than a memory allocation failure. If it was due to a memory
allocation failue we would have already paniced and no need to do it again.
Signed-off-by: Eric Paris <eparis@redhat.com>
This patch adds an end of event record type. It will be sent by the kernel as
the last record when a multi-record event is triggered. This will aid realtime
analysis programs since they will now reliably know they have the last record
to complete an event. The audit daemon filters this and will not write it to
disk.
Signed-off-by: Steve Grubb <sgrubb redhat com>
Signed-off-by: Eric Paris <eparis@redhat.com>
In order to correlate audit records to an individual login add a session
id. This is incremented every time a user logs in and is included in
almost all messages which currently output the auid. The field is
labeled ses= or oses=
Signed-off-by: Eric Paris <eparis@redhat.com>
Add uid, loginuid, and comm collection to OBJ_PID records. This just
gives users a little more information about the task that received a
signal. pid is rather meaningless after the fact, and even though comm
isn't great we can't collect exe reasonably on this code path for
performance reasons.
Signed-off-by: Eric Paris <eparis@redhat.com>
The syscall exit code will change ERESTART* kernel internal return codes
to EINTR if it does not restart the syscall. Since we collect the audit
info before that point we should fix those in the audit log as well.
Signed-off-by: Eric Paris <eparis@redhat.com>
Keeping loginuid in audit_context is racy and results in messier
code. Taken to task_struct, out of the way of ->audit_context
changes.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There's no reason not to allow multiple calls to pcim_enable_device().
Calls after the first one can simply be noop. All PCI resources will
be released when the initial pcim_enable_device() resource is
released.
This allows more flexibility to managed PCI users.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This patch is based on an original patch from Kuan Luo of NVIDIA,
posted under subject "fixed a bug of adma in rhel4u5 with HDS7250SASUN500G".
His description follows. I've reworked it a bit to avoid some unnecessary
repeated checks but it should be functionally identical.
"The patch is to solve the error message "ata1: CPB flags CMD err,
flags=0x11" when testing HDS7250SASUN500G in rhel4u5.
I tested this hd in 2.6.24-rc7 which needed to remove the mask in
blacklist to run the ncq and the same error also showed up.
I traced the bug and found that the interrupt finished a command (for
example, tag=0) when the driver got that adma status is
NV_ADMA_STAT_DONE and cpb->resp_flags is NV_CPB_RESP_DONE.
However, For this hd, the drive maybe didn't clear bit 0 at this moment.
It meaned the hardware had not completely finished the command.
If at the same time the driver freed the command(tag 0) and sended
another command (tag 0), the error happened.
The notifier register is 32-bit register containing notifier value.
Value is bit vector containing one bit per tag number (0-31) in
corresponding bit positions (bit 0 is for tag 0, etc). When bit is set
then ADMA indicates that command with corresponding tag number completed
execution.
So i added the check notifier code. Sometimes i saw that the notifier
reg set some bits , but the adma status set NV_ADMA_STAT_CMD_COMPLETE
,not NV_ADMA_STAT_DONE. So i added the NV_ADMA_STAT_CMD_COMPLETE check
code."
Signed-off-by: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
The integrated SATA controller is connected directly to the SoC's
internal bus, not via PCI interface. this patch removes the dependency
on the PCI interface.
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Avoid section mismatch involving arch_register_cpu.
Marking arch_register_cpu as __init and removing the export
for non-hotplug-cpu configurations makes the following warning
go away:
Section mismatch in reference from the function
arch_register_cpu() to the function .devinit.text:register_cpu()
The function arch_register_cpu() references
the function __devinit register_cpu().
This is often because arch_register_cpu lacks a __devinit
annotation or the annotation of register_cpu is wrong.
The only external user of arch_register_cpu in the tree is
in drivers/acpi/processor_core.c where it is guarded by
ACPI_HOTPLUG_CPU (which depends on HOTPLUG_CPU).
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
CC: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The casts will always be needed, may as well make them the right
signedness. The ebx variables can easily be unsigned, may as well.
arch/x86/kernel/cpu/common.c:261:21: warning: incorrect type in argument 2 (different signedness)
arch/x86/kernel/cpu/common.c:261:21: expected unsigned int *eax
arch/x86/kernel/cpu/common.c:261:21: got int *<noident>
arch/x86/kernel/cpu/common.c:262:9: warning: incorrect type in argument 3 (different signedness)
arch/x86/kernel/cpu/common.c:262:9: expected unsigned int *ebx
arch/x86/kernel/cpu/common.c:262:9: got int *<noident>
arch/x86/kernel/cpu/common.c:263:9: warning: incorrect type in argument 4 (different signedness)
arch/x86/kernel/cpu/common.c:263:9: expected unsigned int *ecx
arch/x86/kernel/cpu/common.c:263:9: got int *<noident>
arch/x86/kernel/cpu/common.c:264:9: warning: incorrect type in argument 5 (different signedness)
arch/x86/kernel/cpu/common.c:264:9: expected unsigned int *edx
arch/x86/kernel/cpu/common.c:264:9: got int *<noident>
arch/x86/kernel/cpu/common.c:293:30: warning: incorrect type in argument 3 (different signedness)
arch/x86/kernel/cpu/common.c:293:30: expected unsigned int *ebx
arch/x86/kernel/cpu/common.c:293:30: got int *<noident>
arch/x86/kernel/cpu/common.c:350:22: warning: incorrect type in argument 2 (different signedness)
arch/x86/kernel/cpu/common.c:350:22: expected unsigned int *eax
arch/x86/kernel/cpu/common.c:350:22: got int *<noident>
arch/x86/kernel/cpu/common.c:351:10: warning: incorrect type in argument 3 (different signedness)
arch/x86/kernel/cpu/common.c:351:10: expected unsigned int *ebx
arch/x86/kernel/cpu/common.c:351:10: got int *<noident>
arch/x86/kernel/cpu/common.c:352:10: warning: incorrect type in argument 4 (different signedness)
arch/x86/kernel/cpu/common.c:352:10: expected unsigned int *ecx
arch/x86/kernel/cpu/common.c:352:10: got int *<noident>
arch/x86/kernel/cpu/common.c:353:10: warning: incorrect type in argument 5 (different signedness)
arch/x86/kernel/cpu/common.c:353:10: expected unsigned int *edx
arch/x86/kernel/cpu/common.c:353:10: got int *<noident>
arch/x86/kernel/cpu/common.c:362:30: warning: incorrect type in argument 3 (different signedness)
arch/x86/kernel/cpu/common.c:362:30: expected unsigned int *ebx
arch/x86/kernel/cpu/common.c:362:30: got int *<noident>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Not necessary to expose it, also fixes sparse warning.
arch/x86/kernel/early_printk.c:196:16: warning: symbol 'early_console' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix following warning:
WARNING: arch/x86/kernel/built-in.o(.text+0x1eb41): Section mismatch in reference from the function calgary_handle_quirks() to the function .init.text:calgary_set_split_completion_timeout()
calgary_handle_quirks() are only called at
__init time (in calgary_init_one() via handle_quirks ops).
So annotate this function and the sister function __init.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix following warning:
WARNING: o-x86_64/arch/x86/kernel/built-in.o(.text+0x13d15): Section mismatch in reference from the function acpi_map_lsapic() to the function .cpuinit.text:mp_register_lapic()
The function acpi_map_lsapic() is exported and thus not annotated.
But the sole user is acpi/processor_core.c in a __cpuinit path.
So create a small wrapper and put back the annotation thus
avoiding the warning.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix the following warnings:
WARNING: arch/x86/kernel/built-in.o(.exit.text+0xf8): Section mismatch in reference from the function msr_exit() to the variable .cpuinit.data:msr_class_cpu_notifier
WARNING: arch/x86/kernel/built-in.o(.exit.text+0x158): Section mismatch in reference from the function cpuid_exit() to the variable .cpuinit.data:cpuid_class_cpu_notifier
WARNING: arch/x86/kernel/built-in.o(.exit.text+0x171): Section mismatch in reference from the function microcode_exit() to the variable .cpuinit.data:mc_cpu_notifier
In all three cases there were a function annotated __exit
that referenced a variable annotated __cpuinitdata.
The fix was to replace the annotation of the notifier
with __refdata to tell modpost that the reference to
a _cpuinit function in the notifier are OK.
The unregister call that references the notifier
variable will simple delete the function pointer
so there is no problem ignoring the reference.
Note: This looks like another case where __cpuinit
has been used as replacement for proper use
of CONFIG_HOTPLUG_CPU to decide what code are used for
HOTPLUG_CPU.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Silence the following warning:
WARNING: o-x86_64/arch/x86/kernel/built-in.o(.text+0x17cd3): Section mismatch in reference from the function remove_cpu_from_maps() to the variable .cpuinit.data:cpu_initialized
remove_cpu:maps() had a single user: __cpu_disable() so
mark it static and annotate it with __ref to silence the
warning from modpost.
_cpu_disable() has a single user in kernel/cpu.c:
=> take_cpu_down()
which again has a single user in the following call:
=> __stop_machine_run(take_cpu_down, &tcd_param, cpu);
Here a kthread is created.
So maybe the warning is correct and the right fix is to
remove the __cpuinitdata annotation of cpu_initialized?
Note: The analysis were disturbed by the fact that we had a variable
with the same name in cpu/common.c - but this is 32 bit only]
Note: Should smpboot_64 use cpu_clear()?
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
for bzImage, the vmlinux_64.lds still have s32 bit code, and startup_32
should be 0. fix the comment.
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change latencytop Kconfig entry so it doesn't list the archictectures
that support it. Instead introduce HAVE_LATENCY_SUPPORT which any
architecture can set. Should reduce patch conflicts.
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Holger Wolf <wolf@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To allow the implementation of optimized rw-locks in user space, glibc
needs a possibility to select waiters for wakeup depending on a bitset
mask.
This requires two new futex OPs: FUTEX_WAIT_BITS and FUTEX_WAKE_BITS
These OPs are basically the same as FUTEX_WAIT and FUTEX_WAKE plus an
additional argument - a bitset. Further the FUTEX_WAIT_BITS OP is
expecting an absolute timeout value instead of the relative one, which
is used for the FUTEX_WAIT OP.
FUTEX_WAIT_BITS calls into the kernel with a bitset. The bitset is
stored in the futex_q structure, which is used to enqueue the waiter
into the hashed futex waitqueue.
FUTEX_WAKE_BITS also calls into the kernel with a bitset. The wakeup
function logically ANDs the bitset with the bitset stored in each
waiters futex_q structure. If the result is zero (i.e. none of the set
bits in the bitsets is matching), then the waiter is not woken up. If
the result is not zero (i.e. one of the set bits in the bitsets is
matching), then the waiter is woken.
The bitset provided by the caller must be non zero. In case the
provided bitset is zero the kernel returns EINVAL.
Internaly the new OPs are only extensions to the existing FUTEX_WAIT
and FUTEX_WAKE functions. The existing OPs hand a bitset with all bits
set into the futex_wait() and futex_wake() functions.
Signed-off-by: Thomas Gleixner <tgxl@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The WARN_ON() in the fixup return path of futex_lock_pi() can
trigger with false positives.
The following scenario happens:
t1 holds the futex and t2 and t3 are blocked on the kernel side rt_mutex.
t1 releases the futex (and the rt_mutex) and assigned t2 to be the next
owner of the futex.
t2 is interrupted and returns w/o acquiring the rt_mutex, before t1 can
release the rtmutex.
t1 releases the rtmutex and t3 becomes the pending owner of the rtmutex.
t2 notices that it is the designated owner (user space variable) and
fails to acquire the rt_mutex via trylock, because it is not allowed to
steal the rt_mutex from t3. Now it looks at the rt_mutex pending owner (t3)
and assigns the futex and the pi_state to it.
During the fixup t4 steals the rtmutex from t3.
t2 returns from the fixup and the owner of the rt_mutex has changed from
t3 to t4.
There is no need to do another round of fixups from t2. The important
part (t2 is not returning as the user space visible owner) is
done. The further fixups are done, before either t3 or t4 return to
user space.
For the user space it is not relevant which task (t3 or t4) is the real
owner, as long as those are both in the kernel, which is guaranteed by
the serialization of the hash bucket lock. Both tasks (which ever returns
first to userspace - t4 because it locked the rt_mutex or t3 due to a signal)
are going through the lock_futex_pi() return path where the ownership is
fixed before the return to user space.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
