commit 58b3bafff8 upstream.
In 7fcfa9a2d9 an unintended prefix "Counter:18 Name:" was removed from
the description for L1D_RO_EXCL_WRITES, but the extra name remained in
the description. Remove it too.
Fixes: 7fcfa9a2d9 ("perf list: Fix s390 counter long description for L1D_RO_EXCL_WRITES")
Signed-off-by: Ed Maste <emaste@freebsd.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Link: http://lore.kernel.org/lkml/20191212145346.5026-1-emaste@freefall.freebsd.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc7e3f63d7 upstream.
The loopback feature is only supported on a few drivers like broadcom,
mellanox, etc. The default veth driver has not supported it yet. To avoid
returning failed and making the runner feel confused, let's just skip
the test on drivers that not support loopback.
Fixes: ad11340994 ("selftests: Add loopback test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 152044775d ]
There is no a_r3, a_r4 in the testing topology.
It should be b_r1, b_r2. Also b_r1 mtu is 1400 and b_r2 mtu is 1500.
Fixes: e44e428f59 ("selftests: pmtu: add basic IPv4 and IPv6 PMTU tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4eac734486 ]
On an old perl such as v5.10.1, `kselftest/prefix.pl` gives below error
message:
Can't locate object method "autoflush" via package "IO::Handle" at kselftest/prefix.pl line 10.
This commit fixes the error by explicitly specifying the use of the
`IO::Handle` package.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d187801d1a ]
If a timeout failure occurs, kselftest kills the test process and prints
the timeout log. If the test process has killed while printing a log
that ends with new line, the timeout log can be printed in middle of the
test process output so that it can be seems like a comment, as below:
# test_process_log not ok 3 selftests: timers: nsleep-lat # TIMEOUT
This commit avoids such problem by printing one more line before the
TIMEOUT failure log.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2870782687 ]
Before this patch, perf expected that there might be NPROC*4 unique
cache entries at max, however, it also expected that some of them would
be shared and/or of the same size, thus the final number of entries
would be reduced to be lower than NPROC*4. In case the number of entries
hadn't been reduced (was NPROC*4), the warning was printed.
However, some systems might have unusual cache topology, such as the
following two-processor KVM guest:
cpu level shared_cpu_list size
0 1 0 32K
0 1 0 64K
0 2 0 512K
0 3 0 8192K
1 1 1 32K
1 1 1 64K
1 2 1 512K
1 3 1 8192K
This KVM guest has 8 (NPROC*4) unique cache entries, which used to make
perf printing the message, although there actually aren't "way too many
cpu caches".
v2: Removing unused argument.
v3: Unifying the way we obtain number of cpus.
v4: Removed '& UINT_MAX' construct which is redundant.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 20191208162056.20772-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb573e746b ]
Commit f01642e491 ("perf metricgroup: Support multiple events for
metricgroup") introduced support for multiple events in a metric group.
But with the current upstream, metric events names are not printed
properly
In power9 platform:
command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
1.000208486
2.000368863
2.001400558
Similarly in skylake platform:
command:./perf stat --metric-only -M Power -I 1000
1.000579994
2.002189493
With current upstream version, issue is with event name comparison logic
in find_evsel_group(). Current logic is to compare events belonging to a
metric group to the events in perf_evlist. Since the break statement is
missing in the loop used for comparison between metric group and
perf_evlist events, the loop continues to execute even after getting a
pattern match, and end up in discarding the matches.
Incase of single metric event belongs to metric group, its working fine,
because in case of single event once it compare all events it reaches to
end of perf_evlist.
Example for single metric event in power9 platform:
command:# ./perf stat --metric-only -M branches_per_inst -I 1000 sleep 1
1.000094653 0.2
1.001337059 0.0
This patch fixes the issue by making sure once we found all events
belongs to that metric event matched in find_evsel_group(), we
successfully break from that loop by adding corresponding condition.
With this patch:
In power9 platform:
command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
result:#
time derat_4k_miss_rate_percent derat_4k_miss_ratio derat_miss_ratio derat_64k_miss_rate_percent derat_64k_miss_ratio dslb_miss_rate_percent islb_miss_rate_percent
1.000135672 0.0 0.3 1.0 0.0 0.2 0.0 0.0
2.000380617 0.0 0.0 0.0 0.0 0.0 0.0 0.0
command:# ./perf stat --metric-only -M Power -I 1000
Similarly in skylake platform:
result:#
time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency
1.000563580 0.3 0.0 2.6 44.2 21.9 0.0 0.0 0.0
2.002235027 0.4 0.0 2.7 43.0 20.7 0.0 0.0 0.0
Committer testing:
Before:
[root@seventh ~]# perf stat --metric-only -M Power -I 1000
# time
1.000383223
2.001168182
3.001968545
4.002741200
5.003442022
^C 5.777687244
[root@seventh ~]#
After the patch:
[root@seventh ~]# perf stat --metric-only -M Power -I 1000
# time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency
1.000406577 0.4 0.1 1.4 97.0 0.0 0.0 0.0 0.0
2.001481572 0.3 0.0 0.6 97.9 0.0 0.0 0.0 0.0
3.002332585 0.2 0.0 1.0 97.5 0.0 0.0 0.0 0.0
4.003196624 0.2 0.0 0.3 98.6 0.0 0.0 0.0 0.0
5.004063851 0.3 0.0 0.7 97.7 0.0 0.0 0.0 0.0
^C 5.471260276 0.2 0.0 0.5 49.3 0.0 0.0 0.0 0.0
[root@seventh ~]#
[root@seventh ~]# dmesg | grep -i skylake
[ 0.187807] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[root@seventh ~]#
Fixes: f01642e491 ("perf metricgroup: Support multiple events for metricgroup")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191120084059.24458-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b79bcdf03 ]
When the kptr_restrict sysctl is set, the kernel can fail to return
jited_ksyms or jited_prog_insns, but still have positive values in
nr_jited_ksyms and jited_prog_len. This causes bpftool to crash when
trying to dump the program because it only checks the len fields not
the actual pointers to the instructions and ksyms.
Fix this by adding the missing checks.
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Fixes: f84192ee00 ("tools: bpftool: resolve calls without using imm field")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191210181412.151226-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ef1ec0ca3 ]
Fix Makefile to set safesetid-test.sh to TEST_PROGS instead
of non existing run_tests.sh.
Without this fix, I got following error.
----
TAP version 13
1..1
# selftests: safesetid: run_tests.sh
# Warning: file run_tests.sh is missing!
not ok 1 selftests: safesetid: run_tests.sh
----
Fixes: c67e8ec03f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 295c4e21cf ]
Check the return value of setuid() and setgid().
This fixes the following warnings and improves test result.
safesetid-test.c: In function ‘main’:
safesetid-test.c:294:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(NO_POLICY_USER);
^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:295:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
setgid(NO_POLICY_USER);
^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:309:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(RESTRICTED_PARENT);
^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:310:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
setgid(RESTRICTED_PARENT);
^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c: In function ‘test_setuid’:
safesetid-test.c:216:3: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(child_uid);
^~~~~~~~~~~~~~~~~
Fixes: c67e8ec03f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be12252212 ]
Move -lcap to LDLIBS from CFLAGS because it is a library
to be linked.
Without this, safesetid failed to build with link error
as below.
----
/usr/bin/ld: /tmp/ccL8rZHT.o: in function `drop_caps':
safesetid-test.c:(.text+0xe7): undefined reference to `cap_get_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x107): undefined reference to `cap_set_flag'
/usr/bin/ld: safesetid-test.c:(.text+0x10f): undefined reference to `cap_set_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x117): undefined reference to `cap_free'
/usr/bin/ld: safesetid-test.c:(.text+0x136): undefined reference to `cap_clear'
collect2: error: ld returned 1 exit status
----
Fixes: c67e8ec03f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cc6c8d4a9 ]
Fix multiple kprobe event testcase to work it correctly.
There are 2 bugfixes.
- Since `wc -l FILE` returns not only line number but also
FILE filename, following "if" statement always failed.
Fix this bug by replacing it with 'cat FILE | wc -l'
- Since "while do-done loop" block with pipeline becomes a
subshell, $N local variable is not update outside of
the loop.
Fix this bug by using actual target number (256) instead
of $N.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba1b9c5048 ]
Use relative path to trigger file instead of absolute debugfs path,
because if the user uses tracefs instead of debugfs, it can be
mounted at /sys/kernel/tracing.
Anyway, since the ftracetest is designed to be run at the tracing
directory, user doesn't need to use absolute path.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25deae098e ]
Since dynamic function tracer can be disabled, set_ftrace_filter
can be disappeared. Test cases which depends on it, must check
whether the set_ftrace_filter exists or not before testing
and if not, return as unsupported.
Also, if the function tracer itself is disabled, we can not
set "function" to current_tracer. Test cases must check it
before testing, and return as unsupported.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd1baf6ca2 ]
If we run ftracetest on the kernel with CONFIG_DYNAMIC_FTRACE=n,
there is no set_ftrace_filter and all test cases are failed, because
reset_ftrace_filter() returns an error.
Let's check whether set_ftrace_filter exists in reset_ftrace_filter()
and clean up only set_ftrace_notrace in initialize_ftrace().
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a2e6af818 ]
Using ns0, ns1, etc. isn't a good idea, they might exist already.
Use a random suffix.
Also, older nft versions don't support "-" as alias for stdin, so
use /dev/stdin instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15b3904f8e ]
When we use 'O=' with make to build libtraceevent in a separate folder
it still copies 'libtraceevent.pc' to its source folder. Modify the
Makefile so that it uses the output folder to copy the pkg-config file
and install from there.
Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-2-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 587db8ebda ]
When we use 'O=' with make to build libtraceevent in a separate folder
it fails to install libtraceevent.a and libtraceevent.so.1.1.0 with the
error:
INSTALL /home/sudip/linux/obj-trace/libtraceevent.a
INSTALL /home/sudip/linux/obj-trace/libtraceevent.so.1.1.0
cp: cannot stat 'libtraceevent.a': No such file or directory
Makefile:225: recipe for target 'install_lib' failed
make: *** [install_lib] Error 1
I used the command:
make O=../../../obj-trace DESTDIR=~/test prefix==/usr install
It turns out libtraceevent Makefile, even though it builds in a separate
folder, searches for libtraceevent.a and libtraceevent.so.1.1.0 in its
source folder.
So, add the 'OUTPUT' prefix to the source path so that 'make' looks for
the files in the correct place.
Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-1-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8df34c5632 upstream.
glibc 2.30 introduces gettid() in public headers, which clashes with
the internal static definition within rseq selftests.
Rename gettid() to rseq_gettid() to eliminate this symbol name clash.
Reported-by: Tommi T. Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Tommi T. Rantala <tommi.t.rantala@nokia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Paul Turner <pjt@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e4ab5ccc35 upstream.
This adds logic to the user_notification_basic test to set a member
of struct seccomp_notif to an invalid value to ensure that the kernel
returns EINVAL if any of the struct seccomp_notif members are set to
invalid values.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191230203811.4996-1-sargun@sargun.me
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88c13f8bd7 upstream.
The seccomp_notif structure should be zeroed out prior to calling the
SECCOMP_IOCTL_NOTIF_RECV ioctl. Previously, the kernel did not check
whether these structures were zeroed out or not, so these worked.
This patch zeroes out the seccomp_notif data structure prior to calling
the ioctl.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191229062451.9467-1-sargun@sargun.me
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 746dd4012d ]
When running test_vmalloc.sh smoke the following print out states that
the fragment is missing.
# ./test_vmalloc.sh: You must have the following enabled in your kernel:
# CONFIG_TEST_VMALLOC=m
Rework to add the fragment 'CONFIG_TEST_VMALLOC=m' to the config file.
Link: http://lkml.kernel.org/r/20190916095217.19665-1-anders.roxell@linaro.org
Fixes: a05ef00c97 ("selftests/vm: add script helper for CONFIG_TEST_VMALLOC_MODULE")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b596e0ff0 ]
To avoid breaking the build on arches where this is not wired up, at
least all the other features should be made available and when using
this specific routine, the "unknown" should point the user/developer to
the need to wire this up on this particular hardware architecture.
Detected in a container mipsel debian cross build environment, where it
shows up as:
In file included from /usr/mipsel-linux-gnu/include/stdio.h:867,
from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
from util/session.c:13:
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2:
/usr/mipsel-linux-gnu/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cross compiler details:
mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
Also on mips64:
In file included from /usr/mips64-linux-gnuabi64/include/stdio.h:867,
from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
from util/session.c:13:
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2,
inlined from 'regs_user__printf' at util/session.c:1139:3,
inlined from 'dump_sample' at util/session.c:1246:3,
inlined from 'machines__deliver_event' at util/session.c:1421:3:
/usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2,
inlined from 'regs_intr__printf' at util/session.c:1147:3,
inlined from 'dump_sample' at util/session.c:1249:3,
inlined from 'machines__deliver_event' at util/session.c:1421:3:
/usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cross compiler details:
mips64-linux-gnuabi64-gcc (Debian 9.2.1-8) 9.2.1 20190909
Fixes: 2bcd355b71 ("perf tools: Add interface to arch registers sets")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-95wjyv4o65nuaeweq31t7l1s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cd032d3b5 ]
brstackinsn must be allowed to be set by the user when AUX area data has
been captured because, in that case, the branch stack might be
synthesized on the fly. This fixes the following error:
Before:
$ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot
[ perf record: Woken up 19 times to write data ]
[ perf record: Captured and wrote 2.274 MB perf.data ]
$ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
Display of branch stack assembler requested, but non all-branch filter set
Hint: run 'perf record -b ...'
After:
$ perf record -e '{intel_pt//,cpu/mem_inst_retired.all_loads,aux-sample-size=8192/pp}:u' grep -rqs jhgjhg /boot
[ perf record: Woken up 19 times to write data ]
[ perf record: Captured and wrote 2.274 MB perf.data ]
$ perf script -F +brstackinsn --xed --itrace=i1usl100 | head
grep 13759 [002] 8091.310257: 1862 instructions:uH: 5641d58069eb bmexec+0x86b (/bin/grep)
bmexec+2485:
00005641d5806b35 jnz 0x5641d5806bd0 # MISPRED
00005641d5806bd0 movzxb (%r13,%rdx,1), %eax
00005641d5806bd6 add %rdi, %rax
00005641d5806bd9 movzxb -0x1(%rax), %edx
00005641d5806bdd cmp %rax, %r14
00005641d5806be0 jnb 0x5641d58069c0 # MISPRED
mismatch of LBR data and executable
00005641d58069c0 movzxb (%r13,%rdx,1), %edi
Fixes: 48d02a1d5c ("perf script: Add 'brstackinsn' for branch stacks")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191127095322.15417-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98e9324511 ]
To fix these build errors on a debian mipsel cross build environment:
builtin-diff.c: In function 'block_cycles_diff_cmp':
builtin-diff.c:550:6: error: absolute value function 'labs' given an argument of type 's64' {aka 'long long int'} but has parameter of type 'long int' which may cause truncation of value [-Werror=absolute-value]
550 | l = labs(left->diff.cycles);
| ^~~~
builtin-diff.c:551:6: error: absolute value function 'labs' given an argument of type 's64' {aka 'long long int'} but has parameter of type 'long int' which may cause truncation of value [-Werror=absolute-value]
551 | r = labs(right->diff.cycles);
| ^~~~
Fixes: 99150a1faa ("perf diff: Use hists to manage basic blocks per symbol")
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-pn7szy5uw384ntjgk6zckh6a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20183ccd3e ]
It is possible that certain config levels are not available, even
if the max level includes the level. There can be missing levels in
some platforms. So ignore the level when called for information dump
for all levels and fail if specifically ask for the missing level.
Here the changes is to continue reading information about other levels
even if we fail to get information for the current level. But use the
"processed" flag to indicate the failure. When the "processed" flag is
not set, don't dump information about that level.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 505127068d ]
On systems where TM (Transactional Memory) is disabled the
tm-signal-sigreturn-nt test causes a SIGILL:
test: tm_signal_sigreturn_nt
tags: git_version:7c202575ef63
!! child died by signal 4
failure: tm_signal_sigreturn_nt
We should skip the test if TM is not available.
Fixes: 34642d70ac ("selftests/powerpc: Add checks for transactional sigreturn")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191104233524.24348-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a02cbc7ffe ]
Some of our TM (Transactional Memory) tests, list "r1" (the stack
pointer) as a clobbered register.
GCC >= 9 doesn't accept this, and the build breaks:
ptrace-tm-spd-tar.c: In function 'tm_spd_tar':
ptrace-tm-spd-tar.c:31:2: error: listing the stack pointer register 'r1' in a clobber list is deprecated [-Werror=deprecated]
31 | asm __volatile__(
| ^~~
ptrace-tm-spd-tar.c:31:2: note: the value of the stack pointer after an 'asm' statement must be the same as it was before the statement
We do have some fairly large inline asm blocks in these tests, and
some of them do change the value of r1. However they should all return
to C with the value in r1 restored, so I think it's legitimate to say
r1 is not clobbered.
As Segher points out, the r1 clobbers may have been added because of
the use of `or 1,1,1`, however that doesn't actually clobber r1.
Segher also points out that some of these tests do clobber LR, because
they call functions, and that is not listed in the clobbers, so add
that where appropriate.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191029095324.14669-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dd504b0fd ]
This test only works when [1] is applied, which was rejected.
Basically, the errors are reported and cleared. In this particular case of
tls sockets, following reads will block.
The test case was originally submitted with the rejected patch, but, then,
was included as part of a different patchset, possibly by mistake.
[1] https://lore.kernel.org/netdev/20191007035323.4360-2-jakub.kicinski@netronome.com/#t
Thanks Paolo Pisati for pointing out the original patchset where this
appeared.
Fixes: 65190f7742 (selftests/tls: add a test for fragmented messages)
Reported-by: Paolo Pisati <paolo.pisati@canonical.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a89b2cbf71 ]
Building selftests with 'make TARGETS=bpf kselftest' was fixed in commit
55d554f5d1 ("tools: bpf: Use !building_out_of_srctree to determine
srctree"). However, by updating $(srctree) in tools/bpf/Makefile for
in-tree builds only, we leave out the case where we pass an output
directory to build BPF tools, but $(srctree) is not set. This
typically happens for:
$ make -s tools/bpf O=/tmp/foo
Makefile:40: /tools/build/Makefile.feature: No such file or directory
Fix it by updating $(srctree) in the Makefile not only for out-of-tree
builds, but also if $(srctree) is empty.
Detected with test_bpftool_build.sh.
Fixes: 55d554f5d1 ("tools: bpf: Use !building_out_of_srctree to determine srctree")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191119105626.21453-1-quentin.monnet@netronome.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10992af6bf ]
It is necessary to free the memory that we have allocated when error occurs.
Fixes: ef3072cd1d ("tools lib traceevent: Get rid of die in add_filter_type()")
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20191119014415.57210-1-hewenliang4@huawei.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 91e2f539ee upstream.
Fix die_walk_lines() to list the function entry line correctly. Since
the dwarf_entrypc() does not return the entry pc if the DIE has only
range attribute, __die_walk_funclines() fails to list the declaration
line (entry line) in that case.
To solve this issue, this introduces die_entrypc() which correctly
returns the entry PC (the first address range) even if the DIE has only
range attribute. With this fix die_walk_lines() shows the function entry
line is able to probe correctly.
Fixes: 4cc9cec636 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157190837419.1859.4619125803596816752.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bb1835a3b8 ]
Avoid termination of trace loading in case the last record in the
decompressed buffer partly resides in the following mmaped
PERF_RECORD_COMPRESSED record.
In this case NULL value returned by fetch_mmaped_event() means to
proceed to the next mmaped record then decompress it and load compressed
events.
The issue can be reproduced like this:
$ perf record -z -- some_long_running_workload
$ perf report --stdio -vv
decomp (B): 44519 to 163000
decomp (B): 48119 to 174800
decomp (B): 65527 to 131072
fetch_mmaped_event: head=0x1ffe0 event->header_size=0x28, mmap_size=0x20000: fuzzed perf.data?
Error:
failed to process sample
...
Testing:
71: Zstd perf.data compression/decompression : Ok
$ tools/perf/perf report -vv --stdio
decomp (B): 59593 to 262160
decomp (B): 4438 to 16512
decomp (B): 285 to 880
Looking at the vmlinux_path (8 entries long)
Using vmlinux for symbols
decomp (B): 57474 to 261248
prefetch_event: head=0x3fc78 event->header_size=0x28, mmap_size=0x3fc80: fuzzed or compressed perf.data?
decomp (B): 25 to 32
decomp (B): 52 to 120
...
Fixes: 57fc032ad6 ("perf session: Avoid infinite loop when seeing invalid header.size")
Link: https://marc.info/?l=linux-kernel&m=156580812427554&w=2
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/cf782c34-f3f8-2f9f-d6ab-145cee0d5322@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3de88c9113 ]
Drivers use different fields to report the number of channels, so take
the maximum of all data channels (rx, tx, combined) when determining the
size of the xsk map. The current code used only 'combined' which was set
to 0 in some drivers e.g. mlx4.
Tested: compiled and run xdpsock -q 3 -r -S on mlx4
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20191119001951.92930-1-lrizzo@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ea2612b98 ]
Currently, with latest llvm trunk, selftest test_progs failed obj
file test_seg6_loop.o with the following error in verifier:
infinite loop detected at insn 76
The byte code sequence looks like below, and noted that alu32 has been
turned off by default for better generated codes in general:
48: w3 = 100
49: *(u32 *)(r10 - 68) = r3
...
; if (tlv.type == SR6_TLV_PADDING) {
76: if w3 == 5 goto -18 <LBB0_19>
...
85: r1 = *(u32 *)(r10 - 68)
; for (int i = 0; i < 100; i++) {
86: w1 += -1
87: if w1 == 0 goto +5 <LBB0_20>
88: *(u32 *)(r10 - 68) = r1
The main reason for verification failure is due to partial spills at
r10 - 68 for induction variable "i".
Current verifier only handles spills with 8-byte values. The above 4-byte
value spill to stack is treated to STACK_MISC and its content is not
saved. For the above example:
w3 = 100
R3_w=inv100 fp-64_w=inv1086626730498
*(u32 *)(r10 - 68) = r3
R3_w=inv100 fp-64_w=inv1086626730498
...
r1 = *(u32 *)(r10 - 68)
R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
fp-64=inv1086626730498
To resolve this issue, verifier needs to be extended to track sub-registers
in spilling, or llvm needs to enhanced to prevent sub-register spilling
in register allocation phase. The former will increase verifier complexity
and the latter will need some llvm "hacking".
Let us workaround this issue by declaring the induction variable as "long"
type so spilling will happen at non sub-register level. We can revisit this
later if sub-register spilling causes similar or other verification issues.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191117214036.1309510-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b054b7133 ]
When run_kselftests.sh is run, it hangs after test_tc_tunnel.sh. The reason
is test_tc_tunnel.sh ensures the server ('nc -l') is run all the time,
starting it again every time it is expected to terminate. The exception is
the final client_connect: the server is not started anymore, which ensures
no process is kept running after the test is finished.
For a sit test, though, the script is terminated prematurely without the
final client_connect and the 'nc' process keeps running. This in turn causes
the run_one function in kselftest/runner.sh to hang forever, waiting for the
runaway process to finish.
Ensure a remaining server is terminated on cleanup.
Fixes: f6ad6accaa ("selftests/bpf: expand test_tc_tunnel with SIT encap")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/60919291657a9ee89c708d8aababc28ebe1420be.1573821780.git.jbenc@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7a0d65d80 ]
With latest llvm compiler, running test_progs will have the following
verifier failure for test_sysctl_loop1.o:
libbpf: load bpf program failed: Permission denied
libbpf: -- BEGIN DUMP LOG ---
libbpf:
invalid indirect read from stack var_off (0x0; 0xff)+196 size 7
...
libbpf: -- END LOG --
libbpf: failed to load program 'cgroup/sysctl'
libbpf: failed to load object 'test_sysctl_loop1.o'
The related bytecode looks as below:
0000000000000308 LBB0_8:
97: r4 = r10
98: r4 += -288
99: r4 += r7
100: w8 &= 255
101: r1 = r10
102: r1 += -488
103: r1 += r8
104: r2 = 7
105: r3 = 0
106: call 106
107: w1 = w0
108: w1 += -1
109: if w1 > 6 goto -24 <LBB0_5>
110: w0 += w8
111: r7 += 8
112: w8 = w0
113: if r7 != 224 goto -17 <LBB0_8>
And source code:
for (i = 0; i < ARRAY_SIZE(tcp_mem); ++i) {
ret = bpf_strtoul(value + off, MAX_ULONG_STR_LEN, 0,
tcp_mem + i);
if (ret <= 0 || ret > MAX_ULONG_STR_LEN)
return 0;
off += ret & MAX_ULONG_STR_LEN;
}
Current verifier is not able to conclude that register w0 before '+'
at insn 110 has a range of 1 to 7 and thinks it is from 0 - 255. This
leads to more conservative range for w8 at insn 112, and later verifier
complaint.
Let us workaround this issue until we found a compiler and/or verifier
solution. The workaround in this patch is to make variable 'ret' volatile,
which will force a reload and then '&' operation to ensure better value
range. With this patch, I got the below byte code for the loop:
0000000000000328 LBB0_9:
101: r4 = r10
102: r4 += -288
103: r4 += r7
104: w8 &= 255
105: r1 = r10
106: r1 += -488
107: r1 += r8
108: r2 = 7
109: r3 = 0
110: call 106
111: *(u32 *)(r10 - 64) = r0
112: r1 = *(u32 *)(r10 - 64)
113: if w1 s< 1 goto -28 <LBB0_5>
114: r1 = *(u32 *)(r10 - 64)
115: if w1 s> 7 goto -30 <LBB0_5>
116: r1 = *(u32 *)(r10 - 64)
117: w1 &= 7
118: w1 += w8
119: r7 += 8
120: w8 = w1
121: if r7 != 224 goto -21 <LBB0_9>
Insn 117 did the '&' operation and we got more precise value range
for 'w8' at insn 120. The test is happy then:
#3/17 test_sysctl_loop1.o:OK
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191107170045.2503480-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 670cd6849e ]
Fix printf format warnings on arm (and other 32bit arch).
- udpgso.c and udpgso_bench_tx use %lu for size_t but it
should be unsigned long long on 32bit arch.
- so_txtime.c uses %ld for int64_t, but it should be
unsigned long long on 32bit arch.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f3571ea71 ]
Currently proc-self-map-files-002.c sets va_max (max test address
of user virtual address) to 4GB, but it is too big for 32bit
arch and 1UL << 32 is overflow on 32bit long.
Also since this value should be enough bigger than vm.mmap_min_addr
(64KB or 32KB by default), 1MB should be enough.
Make va_max 1MB unconditionally.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9656b346b2 ]
Fix issue reported by static analysis (Coverity). If bpf_prog_get_fd_by_id()
fails, xsk_lookup_bpf_maps() will fail as well and clean-up code will attempt
close() with fd=-1. Fix by checking bpf_prog_get_fd_by_id() return result and
exiting early.
Fixes: 10a13bb40e ("libbpf: remove qidconf and better support external bpf programs.")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107054059.313884-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da6cb952a8 ]
Filter out instances except for inlined_subroutine and subprogram DIE in
die_walk_instances() and die_is_func_instance().
This fixes an issue that perf probe sets some probes on calling address
instead of a target function itself.
When perf probe walks on instances of an abstruct origin (a kind of
function prototype of inlined function), die_walk_instances() can also
pass a GNU_call_site (a GNU extension for call site) to callback. Since
it is not an inlined instance of target function, we have to filter out
when searching a probe point.
Without this patch, perf probe sets probes on call site address too.This
can happen on some function which is marked "inlined", but has actual
symbol. (I'm not sure why GCC mark it "inlined"):
# perf probe -D vfs_read
p:probe/vfs_read _text+2500017
p:probe/vfs_read_1 _text+2499468
p:probe/vfs_read_2 _text+2499563
p:probe/vfs_read_3 _text+2498876
p:probe/vfs_read_4 _text+2498512
p:probe/vfs_read_5 _text+2498627
With this patch:
Slightly different results, similar tho:
# perf probe -D vfs_read
p:probe/vfs_read _text+2498512
Committer testing:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
Before:
# perf probe -D vfs_read
p:probe/vfs_read _text+3131557
p:probe/vfs_read_1 _text+3130975
p:probe/vfs_read_2 _text+3131047
p:probe/vfs_read_3 _text+3130380
p:probe/vfs_read_4 _text+3130000
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
#
After:
# perf probe -D vfs_read
p:probe/vfs_read _text+3130000
#
Fixes: db0d2c6420 ("perf probe: Search concrete out-of-line instances")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241937063.32002.11024544873990816590.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4d99bdfd1 ]
Skip end-of-sequence and non-statement lines while walking through lines
list.
The "end-of-sequence" line information means:
"the current address is that of the first byte after the
end of a sequence of target machine instructions."
(DWARF version 4 spec 6.2.2)
This actually means out of scope and we can not probe on it.
On the other hand, the statement lines (is_stmt) means:
"the current instruction is a recommended breakpoint location.
A recommended breakpoint location is intended to “represent”
a line, a statement and/or a semantically distinct subpart
of a statement."
(DWARF version 4 spec 6.2.2)
So, non-statement line info also should be skipped.
These can reduce unneeded probe points and also avoid an error.
E.g. without this patch:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new events:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_3 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_4 (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask_4 -aR sleep 1
#
This puts 5 probes on one line, but acutally it's not inlined function.
This is because there are many non statement instructions at the
function prologue.
With this patch:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new event:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1
#
Now perf-probe skips unneeded addresses.
Committer testing:
Slightly different results, but similar:
Before:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
#
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new events:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:1)
probe:clear_tasks_mm_cpumask_2 (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask_2 -aR sleep 1
#
After:
# perf probe -a "clear_tasks_mm_cpumask:1"
Added new event:
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask:1)
You can now use it in all perf tools, such as:
perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1
# perf probe -l
probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c)
#
Fixes: 4cc9cec636 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241936090.32002.12156347518596111660.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86c0bf8539 ]
Fix to show calling lines of inlined functions (where an inline function
is called).
die_walk_lines() filtered out the lines inside inlined functions based
on the address. However this also filtered out the lines which call
those inlined functions from the target function.
To solve this issue, check the call_file and call_line attributes and do
not filter out if it matches to the line information.
Without this fix, perf probe -L doesn't show some lines correctly.
(don't see the lines after 17)
# perf probe -L vfs_read
<vfs_read@/home/mhiramat/ksrc/linux/fs/read_write.c:0>
0 ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos)
1 {
2 ssize_t ret;
4 if (!(file->f_mode & FMODE_READ))
return -EBADF;
6 if (!(file->f_mode & FMODE_CAN_READ))
return -EINVAL;
8 if (unlikely(!access_ok(buf, count)))
return -EFAULT;
11 ret = rw_verify_area(READ, file, pos, count);
12 if (!ret) {
13 if (count > MAX_RW_COUNT)
count = MAX_RW_COUNT;
15 ret = __vfs_read(file, buf, count, pos);
16 if (ret > 0) {
fsnotify_access(file);
add_rchar(current, ret);
}
With this fix:
# perf probe -L vfs_read
<vfs_read@/home/mhiramat/ksrc/linux/fs/read_write.c:0>
0 ssize_t vfs_read(struct file *file, char __user *buf, size_t count, loff_t *pos)
1 {
2 ssize_t ret;
4 if (!(file->f_mode & FMODE_READ))
return -EBADF;
6 if (!(file->f_mode & FMODE_CAN_READ))
return -EINVAL;
8 if (unlikely(!access_ok(buf, count)))
return -EFAULT;
11 ret = rw_verify_area(READ, file, pos, count);
12 if (!ret) {
13 if (count > MAX_RW_COUNT)
count = MAX_RW_COUNT;
15 ret = __vfs_read(file, buf, count, pos);
16 if (ret > 0) {
17 fsnotify_access(file);
18 add_rchar(current, ret);
}
20 inc_syscr(current);
}
Fixes: 4cc9cec636 ("perf probe: Introduce lines walker interface")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241937995.32002.17899884017011512577.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c701636aee ]
Make find_best_scope() returns innermost DIE at given address if there
is no best matched scope DIE. Since Gcc sometimes generates intuitively
strange line info which is out of inlined function address range, we
need this fixup.
Without this, sometimes perf probe failed to probe on a line inside an
inlined function:
# perf probe -D ksys_open:3
Failed to find scope of probe point.
Error: Failed to add events.
With this fix, 'perf probe' can probe it:
# perf probe -D ksys_open:3
p:probe/ksys_open _text+25707308
p:probe/ksys_open_1 _text+25710596
p:probe/ksys_open_2 _text+25711114
p:probe/ksys_open_3 _text+25711343
p:probe/ksys_open_4 _text+25714058
p:probe/ksys_open_5 _text+2819653
p:probe/ksys_open_6 _text+2819701
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157291300887.19771.14936015360963292236.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dee36a2abb ]
Since debuginfo__find_probes() callback function can be called with the
location which already passed, the callback function must filter out
such overlapped locations.
add_probe_trace_event() has already done it by commit 1a375ae765
("perf probe: Skip same probe address for a given line"), but
add_available_vars() doesn't. Thus perf probe -v shows same address
repeatedly as below:
# perf probe -V vfs_read:18
Available variables at vfs_read:18
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+226>
char* buf
loff_t* pos
ssize_t ret
struct file* file
With this fix, perf probe -V shows it correctly:
# perf probe -V vfs_read:18
Available variables at vfs_read:18
@<vfs_read+217>
char* buf
loff_t* pos
ssize_t ret
struct file* file
@<vfs_read+226>
char* buf
loff_t* pos
ssize_t ret
struct file* file
Fixes: cf6eb489e5 ("perf probe: Show accessible local variables")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/157241938927.32002.4026859017790562751.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38f2c4226e ]
Avoid a memory leak when the configuration fails.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191030223448.12930-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e8714c3d1 ]
If event parsing fails the event list is leaked, instead splice the list
onto the out result and let the caller cleanup.
An example input for parse_events found by libFuzzer that reproduces
this memory leak is 'm{'.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191025180827.191916-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ed Maste