Final drm-misc feature pull for 4.15:
UAPI Changes:
- new madvise ioctl for vc4 (Boris)
Core Changes:
- plane commit tracking fixes (Maarten)
- vgaarb improvements for fancy new platforms (aka ppc64 and arm64) by
Bjorn Helgaas
Driver Changes:
- pile of new panel drivers: Toshiba LT089AC19000, Innolux AT043TN24
- more sun4i work to support A10/A20 Tcon and hdmi outputs
- vc4: fix sleep in irq handler by making it threaded (Eric)
- udl probe/edid read fixes (Robert Tarasov)
And a bunch of misc small cleanups/refactors and doc fixes all over.
* tag 'drm-misc-next-2017-10-20' of git://anongit.freedesktop.org/drm/drm-misc: (32 commits)
drm/vc4: Fix sleeps during the IRQ handler for DSI transactions.
drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl
drm/panel: simple: add Toshiba LT089AC19000
dma-fence: remove duplicate word in comment
drm/panel: simple: add delays for Innolux AT043TN24
drm/panel: simple: add bus flags for Innolux AT043TN24
drm/panel: simple: fix vertical timings for Innolux AT043TN24
drm/atomic-helper: check that drivers call drm_crtc_vblank_off
drm: some KMS todo ideas
vgaarb: Factor out EFI and fallback default device selection
vgaarb: Select a default VGA device even if there's no legacy VGA
drm/bridge: adv7511: Fix a use after free
drm/sun4i: Add support for A20 display pipeline components
drm/sun4i: Add support for A10 display pipeline components
drm/sun4i: hdmi: Support HDMI controller on A10
drm/sun4i: tcon: Add support for A10 TCON
drm/sun4i: backend: Support output muxing
drm/sun4i: tcon: Move out the tcon0 common setup
drm/sun4i: tcon: Don't rely on encoders to set the TCON mode
drm/sun4i: tcon: Don't rely on encoders to enable the TCON
...
This contains a bit of cleanup and some minor fixes for the host1x and
Tegra DRM drivers. There's also some more preparatory work for Tegra186
support which I'm not quite ready to send upstream because the GPIO
driver needed for HDMI support has been stuck for months, and we can't
do much without it. Hopefully that driver will land in v4.15, which
would mean we could go ahead with Tegra186 display support in v4.16.
-----BEGIN PGP SIGNATURE-----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=nsc7
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.15-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.15-rc1
This contains a bit of cleanup and some minor fixes for the host1x and
Tegra DRM drivers. There's also some more preparatory work for Tegra186
support which I'm not quite ready to send upstream because the GPIO
driver needed for HDMI support has been stuck for months, and we can't
do much without it. Hopefully that driver will land in v4.15, which
would mean we could go ahead with Tegra186 display support in v4.16.
* tag 'drm/tegra/for-4.15-rc1' of git://anongit.freedesktop.org/tegra/linux: (21 commits)
drm/tegra: hdmi: Add cec-notifier support
drm/tegra: dc: Perform a complete reset sequence
drm/tegra: dc: Make sure to set the module clock rate
drm/tegra: dc: Simplify atomic plane helper functions
drm/tegra: dc: Move some declarations to dc.h
drm/tegra: vic: Use of_device_get_match_data()
drm/tegra: sor: Use of_device_get_match_data()
drm/tegra: hdmi: Use of_device_get_match_data()
drm/tegra: dc: Use of_device_get_match_data()
drm/tegra: Use u64_to_user_ptr helper
gpu: host1x: Fix incorrect comment for channel_request
gpu: host1x: Disassemble more instructions
gpu: host1x: Improve debug disassembly formatting
gpu: host1x: Enable gather filter
gpu: host1x: Enable Tegra186 syncpoint protection
gpu: host1x: Call of_dma_configure() after setting bus
drm/tegra: Add Tegra186 support for VIC
gpu: host1x: Add Tegra186 support
dt-bindings: host1x: Add Tegra186 information
gpu: host1x: syncpt: Request syncpoints per client
...
These provide crtc-id based functions instead of pipe-number, while
also offering higher resolution time (ns) and wider frame count (64)
as required by the Vulkan API.
v2:
* Check for DRIVER_MODESET in new crtc-based vblank ioctls
Failing to check this will oops the driver.
* Ensure vblank interupt is running in crtc_get_sequence ioctl
The sequence and timing values are not correct while the
interrupt is off, so make sure it's running before asking for
them.
* Short-circuit get_sequence if the counter is enabled and accurate
Steal the idea from the code in wait_vblank to avoid the
expense of drm_vblank_get/put
* Return active state of crtc in crtc_get_sequence ioctl
Might be useful for applications that aren't in charge of
modesetting?
* Use drm_crtc_vblank_get/put in new crtc-based vblank sequence ioctls
Daniel Vetter prefers these over the old drm_vblank_put/get
APIs.
* Return s64 ns instead of u64 in new sequence event
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
v3:
* Removed FIRST_PIXEL_OUT_FLAG
* Document that the timestamp in the query and event are
that of the first pixel leaving the display engine for
the display (using the same wording as the Vulkan spec).
Suggested-by: Michel Dänzer <michel@daenzer.net>
Acked-by: Dave Airlie <airlied@redhat.com>
[airlied: left->leaves (Michel)]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Place drm_event_vblank in a new union that includes that and a bare
drm_event structure. This will allow new members of that union to be
added in the future without changing code related to the existing vbl
event type.
Assignments to the crtc_id field are now done when the event is
allocated, rather than when delievered. This way, delivery doesn't
need to have the crtc ID available.
v2:
* Remove 'dev' argument from create_vblank_event
It wasn't being used anyways, and if we need it in the future,
we can always get it from crtc->dev.
* Check for MODESETTING before looking for crtc in queue_vblank_event
UMS drivers will oops if we try to get a crtc, so make sure
we're modesetting before we try to find a crtc_id to fill into
the event.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit dc695b85fde88eca3ef3b03fcd82f15b6bc6e462)
This modifies the datatypes used by the vblank code to provide 64 bits
of vblank count.
The driver interfaces have been left using 32 bits of vblank count;
all of the code necessary to widen that value for the user API was
already included to handle devices returning fewer than 32-bits.
This will provide the necessary datatypes for the Vulkan API.
v2:
* Re-write wait_vblank ioctl to ABSOLUTE sequence
When an application uses the WAIT_VBLANK ioctl with RELATIVE
or NEXTONMISS bits set, the target vblank interval is updated
within the kernel. We need to write that target back to the
ioctl buffer and update the flags bits so that if the wait is
interrupted by a signal, when it is re-started, it will target
precisely the same vblank count as before.
* Leave driver API with 32-bit vblank count
v3:
* Rebase on top of Arnd Bergmann's patch which had
the switch to ktime_t parts.
[airlied: fix conflict with Ville vblank change].
Suggested-by: Michel Dänzer <michel@daenzer.net>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit 2affbc16983e4fc90960bc7f70e7615f4228199b)
Rather than request syncpoints for a struct device *, request them for a
struct host1x_client *. This is important because subsequent patches are
going to break the assumption that host1x will always be the parent for
devices requesting a syncpoint. It's also a more natural choice because
host1x clients are really the only ones that will know how to deal with
syncpoints.
Note that host1x clients are always guaranteed to be children of host1x,
regardless of their location in the device tree.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Last batch of drm/i915 features for v4.15:
- transparent huge pages support (Matthew)
- uapi: I915_PARAM_HAS_SCHEDULER into a capability bitmask (Chris)
- execlists: preemption (Chris)
- scheduler: user defined priorities (Chris)
- execlists optimization (Michał)
- plenty of display fixes (Imre)
- has_ipc fix (Rodrigo)
- platform features definition refactoring (Rodrigo)
- legacy cursor update fix (Maarten)
- fix vblank waits for cursor updates (Maarten)
- reprogram dmc firmware on resume, dmc state fix (Imre)
- remove use_mmio_flip module parameter (Maarten)
- wa fixes (Oscar)
- huc/guc firmware refacoring (Sagar, Michal)
- push encoder specific code to encoder hooks (Jani)
- DP MST fixes (Dhinakaran)
- eDP power sequencing fixes (Manasi)
- selftest updates (Chris, Matthew)
- mmu notifier cpu hotplug deadlock fix (Daniel)
- more VBT parser refactoring (Jani)
- max pipe refactoring (Mika Kahola)
- rc6/rps refactoring and separation (Sagar)
- userptr lockdep fix (Chris)
- tracepoint fixes and defunct tracepoint removal (Chris)
- use rcu instead of abusing stop_machine (Daniel)
- plenty of other fixes all around (Everyone)
* tag 'drm-intel-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-intel: (145 commits)
drm/i915: Update DRIVER_DATE to 20171012
drm/i915: Simplify intel_sanitize_enable_ppgtt
drm/i915/userptr: Drop struct_mutex before cleanup
drm/i915/dp: limit sink rates based on rate
drm/i915/dp: centralize max source rate conditions more
drm/i915: Allow PCH platforms fall back to BIOS LVDS mode
drm/i915: Reuse normal state readout for LVDS/DVO fixed mode
drm/i915: Use rcu instead of stop_machine in set_wedged
drm/i915: Introduce separate status variable for RC6 and LLC ring frequency setup
drm/i915: Create generic functions to control RC6, RPS
drm/i915: Create generic function to setup LLC ring frequency table
drm/i915: Rename intel_enable_rc6 to intel_rc6_enabled
drm/i915: Name structure in dev_priv that contains RPS/RC6 state as "gt_pm"
drm/i915: Move rps.hw_lock to dev_priv and s/hw_lock/pcu_lock
drm/i915: Name i915_runtime_pm structure in dev_priv as "runtime_pm"
drm/i915: Separate RPS and RC6 handling for CHV
drm/i915: Separate RPS and RC6 handling for VLV
drm/i915: Separate RPS and RC6 handling for BDW
drm/i915: Remove superfluous IS_BDW checks and non-BDW changes from gen8_enable_rps
drm/i915: Separate RPS and RC6 handling for gen6+
...
Last set of features for 4.15. Highlights:
- Add a bo flag to allow buffers to opt out of implicit sync
- Add ctx priority setting interface
- Lots more powerplay cleanups
- Start to plumb through vram lost infrastructure for gpu reset
- ttm support for huge pages
- misc cleanups and bug fixes
* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (73 commits)
drm/amd/powerplay: Place the constant on the right side of the test
drm/amd/powerplay: Remove useless variable
drm/amd/powerplay: Don't cast kzalloc() return value
drm/amdgpu: allow GTT overcommit during bind
drm/amdgpu: linear validate first then bind to GART
drm/amd/pp: Fix overflow when setup decf/pix/disp dpm table.
drm/amd/pp: thermal control not enabled on vega10.
drm/amdgpu: busywait KIQ register accessing (v4)
drm/amdgpu: report more amdgpu_fence_info
drm/amdgpu:don't check soft_reset for sriov
drm/amdgpu:fix duplicated setting job's vram_lost
drm/amdgpu:reduce wb to 512 slot
drm/amdgpu: fix regresstion on SR-IOV gpu reset failed
drm/amd/powerplay: Tidy up cz_dpm_powerup_vce()
drm/amd/powerplay: Tidy up cz_dpm_powerdown_vce()
drm/amd/powerplay: Tidy up cz_dpm_update_vce_dpm()
drm/amd/powerplay: Tidy up cz_dpm_update_uvd_dpm()
drm/amd/powerplay: Tidy up cz_dpm_powerup_uvd()
drm/amd/powerplay: Tidy up cz_dpm_powerdown_uvd()
drm/amd/powerplay: Tidy up cz_start_dpm()
...
Allows userspace to figure out if VRAM was lost.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't leak implementation details about how each priority behaves to
usermode. This allows greater flexibility in the future.
Squash into c2636dc53a
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This ioctl will allow us to purge inactive userspace buffers when the
system is running out of contiguous memory.
For now, the purge logic is rather dumb in that it does not try to
release only the amount of BO needed to meet the last CMA alloc request
but instead purges all objects placed in the purgeable pool as soon as
we experience a CMA allocation failure.
Note that the in-kernel BO cache is always purged before the purgeable
cache because those objects are known to be unused while objects marked
as purgeable by a userspace application/library might have to be
restored when they are marked back as unpurgeable, which can be
expensive.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019125748.3152-1-boris.brezillon@free-electrons.com
In order to implement plane leasing we need to count things,
just make the code consistent with the counting code currently
used for counting crtcs/encoders/connectors and drop the need
for num_overlay_planes.
v2: don't forget to assign plane_ptr. (keithp)
v3: use correct bounds check, found by igt.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Quick 4.15 misc pull for the build fix:
Cross-subsystem Changes:
- piles an piles of misc/trivial patches all over, some more from
outreachy applicants
Core Changes:
- build fix for the bridge/of cleanup (Maarten)
- fix vblank count in arm_vblank_event (Ville)
- some kerneldoc typo fixes from Thierry
Driver Changes:
- vc4: Fix T-format tiling scanout, cleanup clock divider w/a (Anholt)
- sun4i: small cleanups and improved code comments all over (Chen-Yu
Tsai)
* tag 'drm-misc-next-2017-10-16' of git://anongit.freedesktop.org/drm/drm-misc: (21 commits)
drm/via: use ARRAY_SIZE
drm/gma500: use ARRAY_SIZE
drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set function
drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits
drm/sun4i: backend: Add comment explaining why registers are cleared
drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memory
drm/sun4i: backend: Create regmap after access is possible
drm/sun4i: don't add components that are already in the queue
drm/vc4: Fix pitch setup for T-format scanout.
drm/vc4: Move the DSI clock divider workaround closer to the clock call.
drm: Replace kzalloc with kcalloc
drm/tinydrm: Remove explicit .best_encoder assignment
drm/tinydrm: Replace dev_error with DRM_DEV_ERROR
drm/drm_of: Move drm_of_panel_bridge_remove_function into header.
drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event()
drm/atomic-helper: Fix typo
drm: Add missing __user annotation to drm_syncobj_array_find()
drm/rockchip: add PINCTRL dependency for LVDS
drm/kirin: Checking for IS_ERR() instead of NULL
driver:gpu: return -ENOMEM on allocation failure.
...
Most notable addition this time is the support for the GPU performance
counters by Christian. This has been in the making for some time and it
has matured a lot. Since this is adding UAPI, the corresponding WIP
userspace can be found at [1] mesa/libdrm repos. I expect that
Christian sends out the final userspace patches for this once you have
pulled the kernel bits.
Philipp optimized the probe path, so etnaviv gets out of the way for
systems that want to boot real quick.
I've done mostly cleanups, disentangling etnaviv from the IOMMU API,
with some MMUv1 optimizations on the way.
* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: (36 commits)
drm/etnaviv: remove unnecessary clock stabilization delay
drm/etnaviv: reduce reset delay
drm/etnaviv: remove unused function etnaviv_gem_new
drm/etnaviv: remove stale comment
drm/etnaviv: submit supports performance monitor requests
drm/etnaviv: enable debug registers on demand
drm/etnaviv: need to disable clock gating when doing profiling
drm/etnaviv: add MC perf domain
drm/etnaviv: add TX perf domain
drm/etnaviv: add RA perf domain
drm/etnaviv: add SE perf domain
drm/etnaviv: add PA perf domain
drm/etnaviv: add SH perf domain
drm/etnaviv: add PE perf domain
drm/etnaviv: add HI perf domain
drm/etnaviv: use 'sync points' for performance monitor requests
drm/etnaviv: clear alloced event
drm/etnaviv: add 'sync point' support
drm/etnaviv: add performance monitor request processing
drm/etnaviv: copy pmrs from userspace
...
Core drm shouldn't depend on anything in drm-kms-helper, or the drm
module will fail to load.
insmod drm fails with
[ 6087.674390] drm: Unknown symbol drm_panel_bridge_remove (err 0)
which is defined in drm_kms_helper.ko
This call was added by commit c70087e8f1 ("drm/drm_of: add
drm_of_panel_bridge_remove function"), and the fix is defining it in the
drm_of.h header, to break the circular dependency.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8f95e623-9480-97dc-2414-77086d8aa49d@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com> #irc
Fixes: c70087e8f1 ("drm/drm_of: add drm_of_panel_bridge_remove function")
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
More 4.15 drm-misc stuff:
Cross-subsystem Changes:
- bridge cleanup refactor (Benjamin Gaignard)
Core Changes:
- less surprising atomic iterators (Maarten), fixes an oops introduced
in drm-next
- better gem/fb helper docs (Noralf)
- fix dma-buf rcu races (Christian König)
Driver Changes:
- adv7511: CEC support (Hans Verkuil)
- sun4i update from Chen-Yu to improve hdmi and A31 support
- sii8620: add remote control support (Maceiej Purski)
New drivers:
- SiI9234 bridge driver (Maciej Purski)
- 7" rpi touch panel (Eric Anholt)
Note that this contains a topic pull from regmap, needed by the sun4i
changes. Mark Brown sent that out for pulling into drm-misc.
* tag 'drm-misc-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-misc: (29 commits)
drm/dp: WARN about invalid/unknown link rates and bw codes
drm/msm/mdp5: remove less than 0 comparison for unsigned value
drm/bridge/sii8620: add remote control support
drm/sun4i: hdmi: Add support for A31's HDMI controller
drm/sun4i: hdmi: Add A31 specific DDC register definitions
drm/sun4i: hdmi: Add support for controller hardware variants
dt-bindings: display: sun4i: Add binding for A31 HDMI controller
drm/sun4i: hdmi: Allow using second PLL as TMDS clk parent
drm/sun4i: hdmi: create a regmap for later use
drm/sun4i: hdmi: Disable clks in bind function error path and unbind function
drm/sun4i: tcon: Add support for demuxing TCON output on A31
drm/sun4i: tcon: Add variant callback for TCON output muxing
drm/bridge/synopsys: dsi :remove is_panel_bridge
drm/vc4: remove bridge from driver internal structure
drm/stm: ltdc: remove bridge from driver internal structure
drm/drm_of: add drm_of_panel_bridge_remove function
drm/bridge: make drm_panel_bridge_remove more robust
dma-fence: fix dma_fence_get_rcu_safe v2
dma-buf: make reservation_object_copy_fences rcu save
drm/atomic: Unref duplicated drm_atomic_state in drm_atomic_helper_resume()
...
The drm vblank handling uses 'timeval' to store timestamps in either
monotonic or wall-clock time base. In either case, it reads the current
time as a ktime_t in get_drm_timestamp() and converts it from there.
This is a bit suspicious, as users of 'timeval' often suffer from
the time_t overflow in y2038. I have gone through this code and
found that it is unlikely to cause problems here:
- The user space ABI does not use time_t or timeval, but uses
'u32' and 'long' as the types. This means at least that rebuilding
user programs against a new libc with 64-bit time_t does not
change the ABI.
- As of commit c61eef726a ("drm: add support for monotonic vblank
timestamps") in linux-3.8, the monotonic timestamp is the default
and can only get reverted to wall-clock through a module-parameter.
- With the default monotonic timestamps, there is no problem at all.
- The drm_wait_vblank_ioctl() interface is alway safe on 64-bit
architectures, on 32-bit it might overflow the 'long' timestamps
in 2038 with wall-clock timestamps.
- The event handling uses 'u32' seconds, which overflow in 2106
on both 32-bit and 64-bit machines, when wall-clock timestamps
are used.
- The effect of overflowing either of the two is only temporary
(during the overflow, and is likely to keep working again
afterwards. It is likely the same problem as observing a
'settimeofday()' call, which was the reason for moving to the
monotonic timestamps in the first place.
Overall, this seems good enough, so my patch removes the use of
'timeval' from the vblank handling altogether and uses ktime_t
consistently, except for the part where we copy the data to user
space structures in the existing format.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- lib/scatterlist updates, use for userptr allocations (Tvrtko)
- Fixed point wrapper cleanup (Mahesh)
- Gen9+ transition watermarks, watermark optimization and fixes (Mahesh)
- Display IPC (Isochronous Priority Control) support (Mahesh)
- GEM workaround fixes (Oscar)
- GVT: PCI config sanitize series (Changbin)
- GVT: Workload submission error handling series (Fred)
- PSR fixes and refactoring (Rodrigo)
- HWSP based optimizations (Chris)
- Private PAT management (Zhi)
- IRQ handling fixes and refactoring (Ville)
- Module parameter refactoring and variable name clash fix (Michal)
- Execlist refactoring, incomplete request unwinding on reset (Chris)
- GuC scheduling improvements (Michal)
- OA updates (Lionel)
- Coffeelake out of alpha support (Rodrigo)
- seqno fixes (Chris)
- Execlist refactoring (Mika)
- DP and DP MST cleanups (Dhinakaran)
- Cannonlake slice/sublice config (Ben)
- Numerous fixes all around (Everyone)
-----BEGIN PGP SIGNATURE-----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=qpkh
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2017-09-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
2nd batch of v4.15 features:
- lib/scatterlist updates, use for userptr allocations (Tvrtko)
- Fixed point wrapper cleanup (Mahesh)
- Gen9+ transition watermarks, watermark optimization and fixes (Mahesh)
- Display IPC (Isochronous Priority Control) support (Mahesh)
- GEM workaround fixes (Oscar)
- GVT: PCI config sanitize series (Changbin)
- GVT: Workload submission error handling series (Fred)
- PSR fixes and refactoring (Rodrigo)
- HWSP based optimizations (Chris)
- Private PAT management (Zhi)
- IRQ handling fixes and refactoring (Ville)
- Module parameter refactoring and variable name clash fix (Michal)
- Execlist refactoring, incomplete request unwinding on reset (Chris)
- GuC scheduling improvements (Michal)
- OA updates (Lionel)
- Coffeelake out of alpha support (Rodrigo)
- seqno fixes (Chris)
- Execlist refactoring (Mika)
- DP and DP MST cleanups (Dhinakaran)
- Cannonlake slice/sublice config (Ben)
- Numerous fixes all around (Everyone)
* tag 'drm-intel-next-2017-09-29' of git://anongit.freedesktop.org/drm/drm-intel: (168 commits)
drm/i915: Update DRIVER_DATE to 20170929
drm/i915: Use memset64() to prefill the GTT page
drm/i915: Also discard second CRC on gen8+ platforms.
drm/i915/psr: Set frames before SU entry for psr2
drm/dp: Add defines for latency in sink
drm/i915: Allow optimized platform checks
drm/i915: Avoid using dev_priv->info.gen directly.
i915: Use %pS printk format for direct addresses
drm/i915/execlists: Notify context-out for lost requests
drm/i915/cnl: Add support slice/subslice/eu configs
drm/i915: Compact device info access by a small re-ordering
drm/i915: Add IS_PLATFORM macro
drm/i915/selftests: Try to recover from a wedged GPU during reset tests
drm/i915/huc: Reorganize HuC authentication
drm/i915: Fix default values of some modparams
drm/i915: Extend I915_PARAMS_FOR_EACH with default member value
drm/i915: Make I915_PARAMS_FOR_EACH macro more flexible
drm/i915: Enable scanline read based on frame timestamps
drm/i915/execlists: Microoptimise execlists_cancel_port_request()
drm/i915: Don't rmw PIPESTAT enable bits
...
This will allow __drm_mode_object_file to be extended to perform
access control checks based on the file in use.
v2: Also fix up vboxvideo driver in staging
[airlied: merging early as this is an API change]
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlnUvBgTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0AuJB/4u17LCa8PBI7pz0LVr7zwj3AEBZrAb
zq/wqlrqZOhyLEfHtLI/So5LyIFYaF7MZJfylHBp6OiDIXEXzee3qLOc5mQB2jnv
BSnH2Ors658o5TCDm1W0xtHXkujAr7MlaV7Wkaw4lLiq3OeNo8lYMdLVW4tLXf0d
ib7hOsO6idt1H8DRYXlrVrGA7Fz8/m2YYahceAOyLAgLxlepoZGJ1xJxMfqr+ZVs
c85y2JoGWFr0Ac/8E/TZUIuONF4forpaWwI1+/0zCfdNLmG9ceAFxiPPIluAGkeO
EyZzahspaFHa0j+/WrOUlB6YcXPY69pUo89kzHYn7ugBrmGoAMtnLnsN
=BA1X
-----END PGP SIGNATURE-----
Merge tag 'regmap-poll-field' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into drm-misc-next
regmap: Add field polling macro
Requested by Maxime Ripard to make sun4i compile again (next time
the other way round is better).
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004104732.jkps4ufekfizcrkz@sirena.co.uk
MHL specification defines Remote Control Protocol(RCP) to
send input events between MHL devices.
The driver now recognizes RCP messages and reacts to them
by reporting key events to input subsystem, allowing
a user to control a device using TV remote control.
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Acked-by: Sean Young <sean@mess.org>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1503565087-19730-1-git-send-email-m.purski@samsung.com
Sadly we can not read any registers via command stream so we need
to extend the drm_etnaviv_gem_submit struct with performance monitor
requests. Those requests gets process before or after the actual
submitted command stream.
The Vivante kernel driver has a special ioctl to read all perfmon
registers at once and return it.
Changes from v1 -> v2:
- use a 16 bit value for signals
- fix padding issues
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Make it possible that userspace can query all performance domains and
its signals. This information is needed to sample those signals via
submit ioctl.
At the moment no performance domain is available.
Changes from v1 -> v2:
- use a 16 bit value for signals
- fix padding issues
- add id member to domain and signal struct
Changes v4 -> v5
- provide for each pipe an own set of pm domains
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This function is the pendant of drm_of_find_panel_or_bridge()
to remove a previously allocated panel_bridge.
Given a specific port and endpoint it remove the panel bridge.
Since drm_panel_bridge_remove() will check that bridge parameter
is not NULL and is a real drm_panel_bridge and no a simple bridge
it is safe to call it directly.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506936888-23844-3-git-send-email-benjamin.gaignard@linaro.org
The AMDGPU_SCHED_OP_PROCESS_PRIORITY_OVERRIDE ioctls are used to set
the priority of a different process in the current system.
When a request is dropped, the process's contexts will be
restored to the priority specified at context creation time.
A request can be dropped by setting the override priority to
AMDGPU_CTX_PRIORITY_UNSET.
An fd is used to identify the remote process. This is simpler than
passing a pid number, which is vulnerable to re-use, etc.
This functionality is limited to DRM_MASTER since abuse of this
interface can have a negative impact on the system's performance.
v2: removed unused output structure
v3: change refcounted interface for a regular set operation
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use _INVALID to identify bad parameters and _UNSET to represent the
lack of interest in a specific value.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new context creation parameter to express a global context priority.
The priority ranking in descending order is as follows:
* AMDGPU_CTX_PRIORITY_HIGH_HW
* AMDGPU_CTX_PRIORITY_HIGH_SW
* AMDGPU_CTX_PRIORITY_NORMAL
* AMDGPU_CTX_PRIORITY_LOW_SW
* AMDGPU_CTX_PRIORITY_LOW_HW
The driver will attempt to schedule work to the hardware according to
the priorities. No latency or throughput guarantees are provided by
this patch.
This interface intends to service the EGL_IMG_context_priority
extension, and vulkan equivalents.
Setting a priority above NORMAL requires CAP_SYS_NICE or DRM_MASTER.
v2: Instead of using flags, repurpose __pad
v3: Swap enum values of _NORMAL _HIGH for backwards compatibility
v4: Validate usermode priority and store it
v5: Move priority validation into amdgpu_ctx_ioctl(), headline reword
v6: add UAPI note regarding priorities requiring CAP_SYS_ADMIN
v7: remove ctx->priority
v8: added AMDGPU_CTX_PRIORITY_LOW, s/CAP_SYS_ADMIN/CAP_SYS_NICE
v9: change the priority parameter to __s32
v10: split priorities into _SW and _HW
v11: Allow DRM_MASTER without CAP_SYS_NICE
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a flag to signal that access to a BO will be synchronized
through an external mechanism.
Currently all buffers shared between contexts are subject to implicit
synchronization. However, this is only required for protocols that
currently don't support an explicit synchronization mechanism (DRI2/3).
This patch introduces the AMDGPU_GEM_CREATE_EXPLICIT_SYNC, so that
users can specify when it is safe to disable implicit sync.
v2: only disable explicit sync in amdgpu_cs_ioctl
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When dma_fence_get_rcu() fails to acquire a reference it doesn't necessary
mean that there is no fence at all.
It usually mean that the fence was replaced by a new one and in this situation
we certainly want to have the new one as result and *NOT* NULL.
v2: Keep extra check after dma_fence_get_rcu().
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505469187-3565-1-git-send-email-deathsimple@vodafone.de
More new stuff for 4.15. Highlights:
- Add clock query interface for raven
- Add new FENCE_TO_HANDLE ioctl
- UVD video encode ring support on polaris
- transparent huge page DMA support
- deadlock fixes
- compute pipe lru tweaks
- powerplay cleanups and regression fixes
- fix duplicate symbol issue with radeon and amdgpu
- misc bug fixes
* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (72 commits)
drm/radeon/dp: make radeon_dp_get_dp_link_config static
drm/radeon: move ci_send_msg_to_smc to where it's used
drm/amd/sched: fix deadlock caused by unsignaled fences of deleted jobs
drm/amd/sched: NULL out the s_fence field after run_job
drm/amd/sched: move adding finish callback to amd_sched_job_begin
drm/amd/sched: fix an outdated comment
drm/amd/sched: rename amd_sched_entity_pop_job
drm/amdgpu: minor coding style fix
drm/ttm: add transparent huge page support for DMA allocations v2
drm/ttm: add support for different pool sizes
drm/ttm: remove unsued options from ttm_mem_global_alloc_page
drm/amdgpu: add uvd enc irq
drm/amdgpu: add uvd enc ib test
drm/amdgpu: add uvd enc ring test
drm/amdgpu: add uvd enc vm functions (v2)
drm/amdgpu: add uvd enc into run queue
drm/amdgpu: add uvd enc rings
drm/amdgpu: add new uvd enc ring methods
drm/amdgpu: add uvd enc command in header
drm/amdgpu: add uvd enc registers in header
...
We are planning to use our own tmpfs mnt in i915 in place of the
shm_mnt, such that we can control the mount options, in particular
huge=, which we require to support huge-gtt-pages. So rather than roll
our own version of __shmem_file_setup, it would be preferred if we could
just give shmem our mnt, and let it do the rest.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: linux-mm@kvack.org
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-2-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-1-chris@chris-wilson.co.uk
Correctly handle different page sizes in the memory accounting.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nobody is actually using that, remove it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for being able to convert an amdgpu fence into one of the handles.
Mesa will use this.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For amdgpu.
drm_syncobj_create is renamed to drm_syncobj_create_as_handle, and new
helpers drm_syncobj_create and drm_syncobj_get_handle are added.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 669c9215af ("drm/atomic: Make async plane update checks work as
intended, v2.") assumed incorrectly that if only 1 plane is matched in
the loop, the variables will be set to that plane. In reality we reset
them to NULL every time a new plane was iterated. This behavior is
surprising, so fix this by making the for loops only assign the
variables on a match.
When we have not added all the planes/crtc/connector to the state, and
there's a few NULL ones after the last one we iterated, te assumption
is broken that the pointers will hold the values from the last loop
iteration, which holds true for all other for_each macros we're using.
Except of course the iterator pointer itself, but that one really is
entirely internal.
Cc: Dmitry Osipenko <digetx@gmail.com>
Fixes: 669c9215af ("drm/atomic: Make async plane update checks work as intended, v2.")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927083532.5756-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Use a priority stored in the context as the initial value when
submitting a request. This allows us to change the default priority on a
per-context basis, allowing different contexts to be favoured with GPU
time at the expense of lower importance work. The user can adjust the
context's priority via I915_CONTEXT_PARAM_PRIORITY, with more positive
values being higher priority (they will be serviced earlier, after their
dependencies have been resolved). Any prerequisite work for an execbuf
will have its priority raised to match the new request as required.
Normal users can specify any value in the range of -1023 to 0 [default],
i.e. they can reduce the priority of their workloads (and temporarily
boost it back to normal if so desired).
Privileged users can specify any value in the range of -1023 to 1023,
[default is 0], i.e. they can raise their priority above all overs and
so potentially starve the system.
Note that the existing schedulers are not fair, nor load balancing, the
execution is strictly by priority on a first-come, first-served basis,
and the driver may choose to boost some requests above the range
available to users.
This priority was originally based around nice(2), but evolved to allow
clients to adjust their priority within a small range, and allow for a
privileged high priority range.
For example, this can be used to implement EGL_IMG_context_priority
https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt
EGL_CONTEXT_PRIORITY_LEVEL_IMG determines the priority level of
the context to be created. This attribute is a hint, as an
implementation may not support multiple contexts at some
priority levels and system policy may limit access to high
priority contexts to appropriate system privilege level. The
default value for EGL_CONTEXT_PRIORITY_LEVEL_IMG is
EGL_CONTEXT_PRIORITY_MEDIUM_IMG."
so we can map
PRIORITY_HIGH -> 1023 [privileged, will failback to 0]
PRIORITY_MED -> 0 [default]
PRIORITY_LOW -> -1023
They also map onto the priorities used by VkQueue (and a VkQueue is
essentially a timeline, our i915_gem_context under full-ppgtt).
v2: s/CAP_SYS_ADMIN/CAP_SYS_NICE/
v3: Report min/max user priorities as defines in the uapi, and rebase
internal priorities on the exposed values.
Testcase: igt/gem_exec_schedule
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-9-chris@chris-wilson.co.uk
In the next few patches, we wish to enable different features for the
scheduler, some which may subtlety change ABI (e.g. allow requests to be
reordered under different circumstances). So we need to make sure
userspace is cognizant of the changes (if they care), by which we employ
the usual method of a GETPARAM. We already have an
I915_PARAM_HAS_SCHEDULER (which notes the existing ability to reorder
requests to avoid bubbles), and now we wish to extend that to be a
bitmask to describe the different capabilities implemented.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-7-chris@chris-wilson.co.uk
This patch adds a macro regmap_field_read_poll_timeout that works
similar to the readx_poll_timeout defined in linux/iopoll.h, except
that this can also return the error value returned by a failed
regmap_field_read.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZ0WQ6AAoJEHm+PkMAQRiGuloH/3sF4qfBhPuJo8OTf0uCtQ18
4Ux9zZbm81df/Jjz0exAp1Jqk+TvdIS3OXPWcKilvbUBP16hQcsxFTnI/5QF+YcN
87aNr+OCMJzOBK4suN1yhzO46NYHeIizdB0PTZVL1Zsto69Tt31D8VJmgH6oBxAw
Isb/nAkOr31dZ9PI5UEExTIanUt6EywVb0UswA+2rNl3h1UkeasQCpMpK2n6HBhU
kVD7sxEd/CN0MmfhB0HrySSam/BeSpOtzoU9bemOwrU2uu9+5+2rqMe7Gsdj4nX6
3Kk+7FQNktlrhxCZIFN/+CdusOUuDd8r/75d7DnsRK5YvSb0sZzJkfD3Nba68Ms=
=7J2+
-----END PGP SIGNATURE-----
BackMerge tag 'v4.14-rc3' into drm-next
Linux 4.14-rc3
Requested by Daniel for the tracing build fix in fixes.
Pull timer fixes from Thomas Gleixner:
"This adds a new timer wheel function which is required for the
conversion of the timer callback function from the 'unsigned long
data' argument to 'struct timer_list *timer'. This conversion has two
benefits:
1) It makes struct timer_list smaller
2) Many callers hand in a pointer to the timer or to the structure
containing the timer, which happens via type casting both at setup
and in the callback. This change gets rid of the typecasts.
Once the conversion is complete, which is planned for 4.15, the old
setup function and the intermediate typecast in the new setup function
go away along with the data field in struct timer_list.
Merging this now into mainline allows a smooth queueing of the actual
conversion in the affected maintainer trees without creating
dependencies"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
um/time: Fixup namespace collision
timer: Prepare to change timer callback argument type
Pull smp/hotplug fixes from Thomas Gleixner:
"This addresses the fallout of the new lockdep mechanism which covers
completions in the CPU hotplug code.
The lockdep splats are false positives, but there is no way to
annotate that reliably. The solution is to split the completions for
CPU up and down, which requires some reshuffling of the failure
rollback handling as well"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp/hotplug: Hotplug state fail injection
smp/hotplug: Differentiate the AP completion between up and down
smp/hotplug: Differentiate the AP-work lockdep class between up and down
smp/hotplug: Callback vs state-machine consistency
smp/hotplug: Rewrite AP state machine core
smp/hotplug: Allow external multi-instance rollback
smp/hotplug: Add state diagram
Pull scheduler fixes from Thomas Gleixner:
"The scheduler pull request comes with the following updates:
- Prevent a divide by zero issue by validating the input value of
sysctl_sched_time_avg
- Make task state printing consistent all over the place and have
explicit state characters for IDLE and PARKED so they wont be
displayed as 'D' state which confuses tools"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/sysctl: Check user input value of sysctl_sched_time_avg
sched/debug: Add explicit TASK_PARKED printing
sched/debug: Ignore TASK_IDLE for SysRq-W
sched/debug: Add explicit TASK_IDLE printing
sched/tracing: Use common task-state helpers
sched/tracing: Fix trace_sched_switch task-state printing
sched/debug: Remove unused variable
sched/debug: Convert TASK_state to hex
sched/debug: Implement consistent task-state printing
The cma drivers use the drm_gem_framebuffer_helper functions now,
so remove drm_fb_cma_destroy, drm_fb_cma_create_handle,
drm_fb_cma_create_with_funcs, drm_fb_cma_create and
drm_fb_cma_prepare_fb.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-11-git-send-email-noralf@tronnes.org
