1
0
Fork 0
Commit Graph

996275 Commits (edbc4f2e2abf777b02ffdd19fc48bca3026ef063)

Author SHA1 Message Date
Suzuki K Poulose 6fc5baf547 perf cs-etm: Fix bitmap for option
When set option with macros ETM_OPT_CTXTID and ETM_OPT_TS, it wrongly
takes these two values (14 and 28 prespectively) as bit masks, but
actually both are the offset for bits.  But this doesn't lead to
further failure due to the AND logic operation will be always true for
ETM_OPT_CTXTID / ETM_OPT_TS.

This patch defines new independent macros (rather than using the
"config" bits) for requesting the "contextid" and "timestamp" for
cs_etm_set_option().

Signed-off-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Al Grant <al.grant@arm.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210206150833.42120-5-leo.yan@linaro.org
[ Extract the change as a separate patch for easier review ]
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:33 -03:00
Michael Petlan 86a19008af perf trace: Fix race in signal handling
Since a lot of stuff happens before the SIGINT signal handler is registered
(scanning /proc/*, etc.), on bigger systems, such as Cavium Sabre CN99xx,
it may happen that first interrupt signal is lost and perf isn't correctly
terminated.

The reproduction code might look like the following:

    perf trace -a &
    PERF_PID=$!
    sleep 4
    kill -INT $PERF_PID

The issue has been found on a CN99xx machine with RHEL-8 and the patch fixes
it by registering the signal handlers earlier in the init stage.

Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Michael Petlan <mpetlan@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/lkml/YEJnaMzH2ctp3PPx@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:32 -03:00
Arnaldo Carvalho de Melo 77d02bd00c perf map: Tighten snprintf() string precision to pass gcc check on some 32-bit arches
Noticed on a debian:experimental mips and mipsel cross build build
environment:

  perfbuilder@ec265a086e9b:~$ mips-linux-gnu-gcc --version | head -1
  mips-linux-gnu-gcc (Debian 10.2.1-3) 10.2.1 20201224
  perfbuilder@ec265a086e9b:~$

    CC       /tmp/build/perf/util/map.o
  util/map.c: In function 'map__new':
  util/map.c:109:5: error: '%s' directive output may be truncated writing between 1 and 2147483645 bytes into a region of size 4096 [-Werror=format-truncation=]
    109 |    "%s/platforms/%s/arch-%s/usr/lib/%s",
        |     ^~
  In file included from /usr/mips-linux-gnu/include/stdio.h:867,
                   from util/symbol.h:11,
                   from util/map.c:2:
  /usr/mips-linux-gnu/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 32 or more bytes (assuming 4294967321) into a destination of size 4096
     67 |   return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     68 |        __bos (__s), __fmt, __va_arg_pack ());
        |        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

Since we have the lenghts for what lands in that place, use it to give
the compiler more info and make it happy.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:32 -03:00
Ravi Bangoria 6740a4e70e perf report: Fix -F for branch & mem modes
perf report fails to add valid additional fields with -F when
used with branch or mem modes. Fix it.

Before patch:

  $ perf record -b
  $ perf report -b -F +srcline_from --stdio
  Error:
  Invalid --fields key: `srcline_from'

After patch:

  $ perf report -b -F +srcline_from --stdio
  # Samples: 8K of event 'cycles'
  # Event count (approx.): 8784
  ...

Committer notes:

There was an inversion: when looking at branch stack dimensions (keys)
it was checking if the sort mode was 'mem', not 'branch'.

Fixes: aa6b3c9923 ("perf report: Make -F more strict like -s")
Reported-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210304062958.85465-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:32 -03:00
Arnaldo Carvalho de Melo c1f272df51 perf tests x86: Move insn.h include to make sure it finds stddef.h
In some versions of alpine Linux the perf build is broken since commit
1d509f2a6e ("x86/insn: Support big endian cross-compiles"):

  In file included from /usr/include/linux/byteorder/little_endian.h:13,
                   from /usr/include/asm/byteorder.h:5,
                   from arch/x86/util/../../../../arch/x86/include/asm/insn.h:10,
                   from arch/x86/util/archinsn.c:2:
  /usr/include/linux/swab.h:161:8: error: unknown type name '__always_inline'
   static __always_inline __u16 __swab16p(const __u16 *p)

So move the inclusion of arch/x86/include/asm/insn.h to later in the
places where linux/stddef.h (that conditionally defines
__always_inline) to workaround this problem on Alpine Linux 3.9 to 3.11,
3.12 onwards works.

Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:32 -03:00
Kan Liang 7d9d4c6edb perf test: Support the ins_lat check in the X86 specific test
The ins_lat of PERF_SAMPLE_WEIGHT_STRUCT stands for the instruction
latency, which is only available for X86. Add a X86 specific test for
the ins_lat and PERF_SAMPLE_WEIGHT_STRUCT type.

The test__x86_sample_parsing() uses the same way as the
test__sample_parsing() to verify a sample type. Since the ins_lat and
PERF_SAMPLE_WEIGHT_STRUCT are the only X86 specific sample type for now,
the test__x86_sample_parsing() only verify the PERF_SAMPLE_WEIGHT_STRUCT
type. Other sample types are still verified in the generic test.

  $ perf test 77 -v
  77: x86 Sample parsing                                              :
  --- start ---
  test child forked, pid 102370
  test child finished with 0
  ---- end ----
  x86 Sample parsing: Ok

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1614787285-104151-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:32 -03:00
Kan Liang a8146d66ab perf test: Fix sample-parsing failure on non-x86 platforms
Executing 'perf test 27' fails on s390:

  [root@t35lp46 perf]# ./perf test -Fv 27
  27: Sample parsing
  --- start ---
  ---- end ----
  Sample parsing: FAILED!
  [root@t35lp46 perf]#

The commit fbefe9c2f8 ("perf tools: Support arch specific
PERF_SAMPLE_WEIGHT_STRUCT processing") changes the ins_lat to a
model-specific variable only for X86, but perf test still verify the
variable in the generic test.

Remove the ins_lat check in the generic test. The following patch will
add it in the X86 specific test.

Fixes: fbefe9c2f8 ("perf tools: Support arch specific PERF_SAMPLE_WEIGHT_STRUCT processing")
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1614787285-104151-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:31 -03:00
Nicholas Fraser ec4d0a7680 perf archive: Fix filtering of empty build-ids
A non-existent build-id used to be treated as all-zero SHA-1 hash.
Build-ids are now variable width. A non-existent build-id is an empty
string and "perf buildid-list" pads this with spaces. This is true even
when using old perf.data files recorded from older versions of perf;
"perf buildid-list" never reports an all-zero hash anymore.

This fixes "perf-archive" to skip missing build-ids by skipping lines
that start with a padding space rather than with zeroes.

Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: https://lore.kernel.org/r/442bffc7-ac5c-0975-b876-a549efce2413@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:31 -03:00
Namhyung Kim bd57a9f33a perf daemon: Fix compile error with Asan
I'm seeing a build failure when build with address sanitizer.  It seems
we could write to the name[100] if the var is longer.

  $ make EXTRA_CFLAGS=-fsanitize=address
  ...
    CC       builtin-daemon.o
  In function ‘get_session_name’,
    inlined from ‘session_config’ at builtin-daemon.c:164:6,
    inlined from ‘server_config’ at builtin-daemon.c:223:10:
  builtin-daemon.c:155:11: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
    155 |  *session = 0;
        |  ~~~~~~~~~^~~
  builtin-daemon.c: In function ‘server_config’:
  builtin-daemon.c:162:7: note: at offset 100 to object ‘name’ with size 100 declared here
    162 |  char name[100];
        |       ^~~~

Fixes: c0666261ff ("perf daemon: Add config file support")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210224071438.686677-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:31 -03:00
Namhyung Kim 513068f2b1 perf stat: Fix use-after-free when -r option is used
I got a segfault when using -r option with event groups.  The option
makes it run the workload multiple times and it will reuse the evlist
and evsel for each run.

While most of resources are allocated and freed properly, the id hash
in the evlist was not and it resulted in the bug.  You can see it with
the address sanitizer like below:

  $ perf stat -r 100 -e '{cycles,instructions}' true
  =================================================================
  ==693052==ERROR: AddressSanitizer: heap-use-after-free on
      address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8
  WRITE of size 8 at 0x6080000003d0 thread T0
    #0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644
    #1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237
    #2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244
    #3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285
    #4 0x558c5747733e in store_evsel_ids util/evsel.c:2765
    #5 0x558c5747733e in evsel__store_ids util/evsel.c:2782
    #6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895
    #7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014
    #8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446
    #9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308
    #14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9)

Actually the nodes in the hash table are struct perf_stream_id and
they were freed in the previous run.  Fix it by resetting the hash.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210225035148.778569-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:31 -03:00
Namhyung Kim e2a99c9a9a libperf: Add perf_evlist__reset_id_hash()
Add the perf_evlist__reset_id_hash() function as an internal function so
that it can be called by perf to reset the hash table.  This is
necessary for 'perf stat' to run the workload multiple times.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210225035148.778569-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:31 -03:00
Jin Yao 034f7ee130 perf stat: Fix wrong skipping for per-die aggregation
Uncore becomes die-scope on Xeon Cascade Lake-AP and perf has supported
--per-die aggregation yet.

One issue is found in check_per_pkg() for uncore events running on AP
system. On cascade Lake-AP, we have:

S0-D0
S0-D1
S1-D0
S1-D1

But in check_per_pkg(), S0-D1 and S1-D1 are skipped because the mask
bits for S0 and S1 have been set for S0-D0 and S1-D0. It doesn't check
die_id. So the counting for S0-D1 and S1-D1 are set to zero.  That's not
correct.

  root@lkp-csl-2ap4 ~# ./perf stat -a -I 1000 -e llc_misses.mem_read --per-die -- sleep 5
     1.001460963 S0-D0           1            1317376 Bytes llc_misses.mem_read
     1.001460963 S0-D1           1             998016 Bytes llc_misses.mem_read
     1.001460963 S1-D0           1             970496 Bytes llc_misses.mem_read
     1.001460963 S1-D1           1            1291264 Bytes llc_misses.mem_read
     2.003488021 S0-D0           1            1082048 Bytes llc_misses.mem_read
     2.003488021 S0-D1           1            1919040 Bytes llc_misses.mem_read
     2.003488021 S1-D0           1             890752 Bytes llc_misses.mem_read
     2.003488021 S1-D1           1            2380800 Bytes llc_misses.mem_read
     3.005613270 S0-D0           1            1126080 Bytes llc_misses.mem_read
     3.005613270 S0-D1           1            2898176 Bytes llc_misses.mem_read
     3.005613270 S1-D0           1             870912 Bytes llc_misses.mem_read
     3.005613270 S1-D1           1            3388608 Bytes llc_misses.mem_read
     4.007627598 S0-D0           1            1124608 Bytes llc_misses.mem_read
     4.007627598 S0-D1           1            3884416 Bytes llc_misses.mem_read
     4.007627598 S1-D0           1             921088 Bytes llc_misses.mem_read
     4.007627598 S1-D1           1            4451840 Bytes llc_misses.mem_read
     5.001479927 S0-D0           1             963328 Bytes llc_misses.mem_read
     5.001479927 S0-D1           1            4831936 Bytes llc_misses.mem_read
     5.001479927 S1-D0           1             895104 Bytes llc_misses.mem_read
     5.001479927 S1-D1           1            5496640 Bytes llc_misses.mem_read

From above output, we can see S0-D1 and S1-D1 don't report the interval
values, they are continued to grow. That's because check_per_pkg()
wrongly decides to use zero counts for S0-D1 and S1-D1.

So in check_per_pkg(), we should use hashmap(socket,die) to decide if
the cpu counts needs to skip. Only considering socket is not enough.

Now with this patch,

  root@lkp-csl-2ap4 ~# ./perf stat -a -I 1000 -e llc_misses.mem_read --per-die -- sleep 5
     1.001586691 S0-D0           1            1229440 Bytes llc_misses.mem_read
     1.001586691 S0-D1           1             976832 Bytes llc_misses.mem_read
     1.001586691 S1-D0           1             938304 Bytes llc_misses.mem_read
     1.001586691 S1-D1           1            1227328 Bytes llc_misses.mem_read
     2.003776312 S0-D0           1            1586752 Bytes llc_misses.mem_read
     2.003776312 S0-D1           1             875392 Bytes llc_misses.mem_read
     2.003776312 S1-D0           1             855616 Bytes llc_misses.mem_read
     2.003776312 S1-D1           1             949376 Bytes llc_misses.mem_read
     3.006512788 S0-D0           1            1338880 Bytes llc_misses.mem_read
     3.006512788 S0-D1           1             920064 Bytes llc_misses.mem_read
     3.006512788 S1-D0           1             877184 Bytes llc_misses.mem_read
     3.006512788 S1-D1           1            1020736 Bytes llc_misses.mem_read
     4.008895291 S0-D0           1             926592 Bytes llc_misses.mem_read
     4.008895291 S0-D1           1             906368 Bytes llc_misses.mem_read
     4.008895291 S1-D0           1             892224 Bytes llc_misses.mem_read
     4.008895291 S1-D1           1             987712 Bytes llc_misses.mem_read
     5.001590993 S0-D0           1             962624 Bytes llc_misses.mem_read
     5.001590993 S0-D1           1             912512 Bytes llc_misses.mem_read
     5.001590993 S1-D0           1             891200 Bytes llc_misses.mem_read
     5.001590993 S1-D1           1             978432 Bytes llc_misses.mem_read

On no-die system, die_id is 0, actually it's hashmap(socket,0), original behavior
is not changed.

Reported-by: Ying Huang <ying.huang@intel.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Huang <ying.huang@intel.com>
Link: http://lore.kernel.org/lkml/20210128013417.25597-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:30 -03:00
Arnaldo Carvalho de Melo 33dc525f93 tools headers UAPI: Sync KVM's kvm.h and vmx.h headers with the kernel sources
To pick the changes in:

  fe6b6bc802 ("KVM: VMX: Enable bus lock VM exit")

That makes 'perf kvm-stat' aware of this new BUS_LOCK exit reason, thus
addressing the following perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
  diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h

Cc: Chenyi Qiang <chenyi.qiang@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:30 -03:00
Arnaldo Carvalho de Melo 1a9bcadd00 tools headers cpufeatures: Sync with the kernel sources
To pick the changes from:

  3b9c723ed7 ("KVM: SVM: Add support for SVM instruction address check change")
  b85a0425d8 ("Enumerate AVX Vector Neural Network instructions")
  fb35d30fe5 ("x86/cpufeatures: Assign dedicated feature word for CPUID_0x8000001F[EAX]")

This only causes these perf files to be rebuilt:

  CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
  CC       /tmp/build/perf/bench/mem-memset-x86-64-asm.o

And addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h

Cc: Borislav Petkov <bp@suse.de>
Cc: Kyung Min Park <kyung.min.park@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:30 -03:00
Arnaldo Carvalho de Melo 6c0afc579a tools headers UAPI: Update tools' copy of linux/coresight-pmu.h
To get the changes in these commits:

  88f11864cf ("coresight: etm-perf: Support PID tracing for kernel at EL2")
  53abf3fe83 ("coresight: etm-perf: Clarify comment on perf options")

This will possibly be used in patches lined up for v5.13.

And silence this perf build warning:

  Warning: Kernel ABI header at 'tools/include/linux/coresight-pmu.h' differs from latest version at 'include/linux/coresight-pmu.h'
  diff -u tools/include/linux/coresight-pmu.h include/linux/coresight-pmu.h

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:30 -03:00
Arnaldo Carvalho de Melo 743108e104 tools headers: Update syscall.tbl files to support mount_setattr
To pick the changes from:

  9caccd4154 ("fs: introduce MOUNT_ATTR_IDMAP")

This adds this new syscall to the tables used by tools such as 'perf
trace', so that one can specify it by name and have it filtered, etc.

Addressing these perf build warnings:

  Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
  diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
  Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
  diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
  Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
  diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YD6Wsxr9ByUbab/a@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:30 -03:00
Namhyung Kim 846580c235 perf test: Fix cpu and thread map leaks in perf_time_to_tsc test
It should release the maps at the end.

  $ perf test -v 71
  71: Convert perf time to TSC                   :
  --- start ---
  test child forked, pid 178744
  mmap size 528384B
  1st event perf time 59207256505278 tsc 13187166645142
  rdtsc          time 59207256542151 tsc 13187166723020
  2nd event perf time 59207256543749 tsc 13187166726393

  =================================================================
  ==178744==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
    #0 0x7faf601f9e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x55b620cfc00a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
    #2 0x55b620cfca2f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
    #3 0x55b620cfd1ef in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
    #4 0x55b620cfd1ef in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
    #5 0x55b6209ef1b2 in test__perf_time_to_tsc tests/perf-time-to-tsc.c:73
    #6 0x55b6209828fb in run_test tests/builtin-test.c:428
    #7 0x55b6209828fb in test_and_print tests/builtin-test.c:458
    #8 0x55b620984a53 in __cmd_test tests/builtin-test.c:679
    #9 0x55b620984a53 in cmd_test tests/builtin-test.c:825
    #10 0x55b6209f0cd4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #11 0x55b62087aa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #12 0x55b62087aa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #13 0x55b62087aa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #14 0x7faf5fd2fd09 in __libc_start_main ../csu/libc-start.c:308

  SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
  test child finished with 1
  ---- end ----
  Convert perf time to TSC: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:30 -03:00
Namhyung Kim 690d91f5ec perf test: Fix cpu map leaks in cpu_map_print test
It should be released after printing the map.

  $ perf test -v 52
  52: Print cpu map                              :
  --- start ---
  test child forked, pid 172233

  =================================================================
  ==172233==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 156 byte(s) in 1 object(s) allocated from:
    #0 0x7fc472518e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x55e63b378f7a in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
    #2 0x55e63b37a05c in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:237
    #3 0x55e63b056d16 in cpu_map_print tests/cpumap.c:102
    #4 0x55e63b056d16 in test__cpu_map_print tests/cpumap.c:120
    #5 0x55e63afff8fb in run_test tests/builtin-test.c:428
    #6 0x55e63afff8fb in test_and_print tests/builtin-test.c:458
    #7 0x55e63b001a53 in __cmd_test tests/builtin-test.c:679
    #8 0x55e63b001a53 in cmd_test tests/builtin-test.c:825
    #9 0x55e63b06dc44 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #10 0x55e63aef7a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #11 0x55e63aef7a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #12 0x55e63aef7a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #13 0x7fc47204ed09 in __libc_start_main ../csu/libc-start.c:308
  ...

  SUMMARY: AddressSanitizer: 448 byte(s) leaked in 7 allocation(s).
  test child finished with 1
  ---- end ----
  Print cpu map: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:29 -03:00
Namhyung Kim 641b625033 perf test: Fix a memory leak in thread_map_remove test
The str should be freed after creating a thread map.  Also change the
open-coded thread map deletion to a call to perf_thread_map__put().

  $ perf test -v 44
  44: Remove thread map                          :
  --- start ---
  test child forked, pid 165536
  2 threads: 165535, 165536
  1 thread: 165536
  0 thread:

  =================================================================
  ==165536==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 14 byte(s) in 1 object(s) allocated from:
    #0 0x7f54453ffe8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x7f5444f8c6a7 in __vasprintf_internal libio/vasprintf.c:71

  SUMMARY: AddressSanitizer: 14 byte(s) leaked in 1 allocation(s).
  test child finished with 1
  ---- end ----
  Remove thread map: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:29 -03:00
Namhyung Kim 4be42882e1 perf test: Fix a thread map leak in thread_map_synthesize test
It missed to call perf_thread_map__put() after using the map.

  $ perf test -v 43
  43: Synthesize thread map                      :
  --- start ---
  test child forked, pid 162640

  =================================================================
  ==162640==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 32 byte(s) in 1 object(s) allocated from:
    #0 0x7fd48cdaa1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
    #1 0x563e6d5f8d0e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
    #2 0x563e6d3ef69a in thread_map__new_by_pid util/thread_map.c:46
    #3 0x563e6d2cec90 in test__thread_map_synthesize tests/thread-map.c:97
    #4 0x563e6d27d8fb in run_test tests/builtin-test.c:428
    #5 0x563e6d27d8fb in test_and_print tests/builtin-test.c:458
    #6 0x563e6d27fa53 in __cmd_test tests/builtin-test.c:679
    #7 0x563e6d27fa53 in cmd_test tests/builtin-test.c:825
    #8 0x563e6d2ebce4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #9 0x563e6d175a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #10 0x563e6d175a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #11 0x563e6d175a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #12 0x7fd48c8dfd09 in __libc_start_main ../csu/libc-start.c:308

  SUMMARY: AddressSanitizer: 8224 byte(s) leaked in 2 allocation(s).
  test child finished with 1
  ---- end ----
  Synthesize thread map: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:29 -03:00
Namhyung Kim 953e7b5960 perf test: Fix cpu and thread map leaks in switch_tracking test
The evlist and cpu/thread maps should be released together.
Otherwise the following error was reported by Asan.

  $ perf test -v 35
  35: Track with sched_switch                    :
  --- start ---
  test child forked, pid 159287
  Using CPUID GenuineIntel-6-8E-C
  mmap size 528384B
  1295 events recorded

  =================================================================
  ==159287==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
    #0 0x7fa28d9a2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x5652f5a5affa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
    #2 0x5652f5a5ba1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
    #3 0x5652f5a5c1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
    #4 0x5652f5a5c1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
    #5 0x5652f5723bbf in test__switch_tracking tests/switch-tracking.c:350
    #6 0x5652f56e18fb in run_test tests/builtin-test.c:428
    #7 0x5652f56e18fb in test_and_print tests/builtin-test.c:458
    #8 0x5652f56e3a53 in __cmd_test tests/builtin-test.c:679
    #9 0x5652f56e3a53 in cmd_test tests/builtin-test.c:825
    #10 0x5652f574fcc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #11 0x5652f55d9a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #12 0x5652f55d9a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #13 0x5652f55d9a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #14 0x7fa28d4d8d09 in __libc_start_main ../csu/libc-start.c:308

  SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
  test child finished with 1
  ---- end ----
  Track with sched_switch: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:29 -03:00
Namhyung Kim f2c3202ba0 perf test: Fix cpu and thread map leaks in keep_tracking test
The evlist and the cpu/thread maps should be released together.
Otherwise following error was reported by Asan.

  $ perf test -v 28
  28: Use a dummy software event to keep tracking:
  --- start ---
  test child forked, pid 156810
  mmap size 528384B

  =================================================================
  ==156810==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
    #0 0x7f637d2bce8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x55cc6295cffa in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
    #2 0x55cc6295da1f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
    #3 0x55cc6295e1df in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
    #4 0x55cc6295e1df in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
    #5 0x55cc626287cf in test__keep_tracking tests/keep-tracking.c:84
    #6 0x55cc625e38fb in run_test tests/builtin-test.c:428
    #7 0x55cc625e38fb in test_and_print tests/builtin-test.c:458
    #8 0x55cc625e5a53 in __cmd_test tests/builtin-test.c:679
    #9 0x55cc625e5a53 in cmd_test tests/builtin-test.c:825
    #10 0x55cc62651cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #11 0x55cc624dba88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #12 0x55cc624dba88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #13 0x55cc624dba88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #14 0x7f637cdf2d09 in __libc_start_main ../csu/libc-start.c:308

  SUMMARY: AddressSanitizer: 72 byte(s) leaked in 2 allocation(s).
  test child finished with 1
  ---- end ----
  Use a dummy software event to keep tracking: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:28 -03:00
Namhyung Kim e06c3ca492 perf test: Fix cpu and thread map leaks in code_reading test
The evlist and the cpu/thread maps should be released together.
Otherwise following error was reported by Asan.

Note that this test still has memory leaks in DSOs so it still fails
even after this change.  I'll take a look at that too.

  # perf test -v 26
  26: Object code reading                        :
  --- start ---
  test child forked, pid 154184
  Looking at the vmlinux_path (8 entries long)
  symsrc__init: build id mismatch for vmlinux.
  symsrc__init: cannot get elf header.
  Using /proc/kcore for kernel data
  Using /proc/kallsyms for symbols
  Parsing event 'cycles'
  mmap size 528384B
  ...
  =================================================================
  ==154184==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 439 byte(s) in 1 object(s) allocated from:
    #0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
    #1 0x55ad9b7e821e in dso__new_id util/dso.c:1256
    #2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132
    #3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347
    #4 0x55ad9b845b7e in map__new util/map.c:176
    #5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787
    #6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64
    #7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499
    #8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741
    #9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833
    #10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608
    #11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722
    #12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428
    #13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458
    #14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679
    #15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825
    #16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308

    ...
  SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).
  test child finished with 1
  ---- end ----
  Object code reading: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:28 -03:00
Namhyung Kim 97ab7c524f perf test: Fix cpu and thread map leaks in sw_clock_freq test
The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL.  Otherwise following error was reported by Asan.

Also change the goto label since it doesn't need to have two.

  # perf test -v 25
  25: Software clock events period values        :
  --- start ---
  test child forked, pid 149154
  mmap size 528384B
  mmap size 528384B

  =================================================================
  ==149154==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 32 byte(s) in 1 object(s) allocated from:
    #0 0x7fef5cd071f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
    #1 0x56260d5e8b8e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
    #2 0x56260d3df7a9 in thread_map__new_by_tid util/thread_map.c:63
    #3 0x56260d2ac6b2 in __test__sw_clock_freq tests/sw-clock.c:65
    #4 0x56260d26d8fb in run_test tests/builtin-test.c:428
    #5 0x56260d26d8fb in test_and_print tests/builtin-test.c:458
    #6 0x56260d26fa53 in __cmd_test tests/builtin-test.c:679
    #7 0x56260d26fa53 in cmd_test tests/builtin-test.c:825
    #8 0x56260d2dbb64 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #9 0x56260d165a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #10 0x56260d165a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #11 0x56260d165a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #12 0x7fef5c83cd09 in __libc_start_main ../csu/libc-start.c:308

    ...
  test child finished with 1
  ---- end ----
  Software clock events period values      : FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:28 -03:00
Namhyung Kim 83d25ccde5 perf test: Fix cpu and thread map leaks in task_exit test
The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL.  Otherwise following error was reported by Asan.

Also change the goto label since it doesn't need to have two.

  # perf test -v 24
  24: Number of exit events of a simple workload :
  --- start ---
  test child forked, pid 145915
  mmap size 528384B

  =================================================================
  ==145915==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 32 byte(s) in 1 object(s) allocated from:
    #0 0x7fc44e50d1f8 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
    #1 0x561cf50f4d2e in perf_thread_map__realloc /home/namhyung/project/linux/tools/lib/perf/threadmap.c:23
    #2 0x561cf4eeb949 in thread_map__new_by_tid util/thread_map.c:63
    #3 0x561cf4db7fd2 in test__task_exit tests/task-exit.c:74
    #4 0x561cf4d798fb in run_test tests/builtin-test.c:428
    #5 0x561cf4d798fb in test_and_print tests/builtin-test.c:458
    #6 0x561cf4d7ba53 in __cmd_test tests/builtin-test.c:679
    #7 0x561cf4d7ba53 in cmd_test tests/builtin-test.c:825
    #8 0x561cf4de7d04 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #9 0x561cf4c71a88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #10 0x561cf4c71a88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #11 0x561cf4c71a88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #12 0x7fc44e042d09 in __libc_start_main ../csu/libc-start.c:308

    ...
  test child finished with 1
  ---- end ----
  Number of exit events of a simple workload: FAILED!

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:28 -03:00
Namhyung Kim 09a61c8f86 perf test: Fix a memory leak in attr test
The get_argv_exec_path() returns a dynamic memory so it should be
freed after use.

  $ perf test -v 17
  ...
  ==141682==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 33 byte(s) in 1 object(s) allocated from:
    #0 0x7f09107d2e8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x7f091035f6a7 in __vasprintf_internal libio/vasprintf.c:71

  SUMMARY: AddressSanitizer: 33 byte(s) leaked in 1 allocation(s).

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210301140409.184570-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:27 -03:00
Namhyung Kim b0faef924d perf test: Fix cpu and thread map leaks in basic mmap test
The evlist has the maps with its own refcounts so we don't need to set
the pointers to NULL.  Otherwise following error was reported by Asan.

  # perf test -v 4
   4: Read samples using the mmap interface      :
  --- start ---
  test child forked, pid 139782
  mmap size 528384B

  =================================================================
  ==139782==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
    #0 0x7f1f76daee8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x564ba21a0fea in cpu_map__trim_new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:79
    #2 0x564ba21a1a0f in perf_cpu_map__read /home/namhyung/project/linux/tools/lib/perf/cpumap.c:149
    #3 0x564ba21a21cf in cpu_map__read_all_cpu_map /home/namhyung/project/linux/tools/lib/perf/cpumap.c:166
    #4 0x564ba21a21cf in perf_cpu_map__new /home/namhyung/project/linux/tools/lib/perf/cpumap.c:181
    #5 0x564ba1e48298 in test__basic_mmap tests/mmap-basic.c:55
    #6 0x564ba1e278fb in run_test tests/builtin-test.c:428
    #7 0x564ba1e278fb in test_and_print tests/builtin-test.c:458
    #8 0x564ba1e29a53 in __cmd_test tests/builtin-test.c:679
    #9 0x564ba1e29a53 in cmd_test tests/builtin-test.c:825
    #10 0x564ba1e95cb4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
    #11 0x564ba1d1fa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
    #12 0x564ba1d1fa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
    #13 0x564ba1d1fa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539
    #14 0x7f1f768e4d09 in __libc_start_main ../csu/libc-start.c:308

    ...
  test child finished with 1
  ---- end ----
  Read samples using the mmap interface: FAILED!
  failed to open shell test directory: /home/namhyung/libexec/perf-core/tests/shell

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20210301140409.184570-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:27 -03:00
Jiri Olsa 84ea603650 perf tools: Fix event's PMU name parsing
Jin Yao reported parser error for software event:

  # perf stat -e software/r1a/ -a -- sleep 1
  event syntax error: 'software/r1a/'
                       \___ parser error

This happens after commit 8c3b1ba0e7 ("drm/i915/gt: Track the
overall awake/busy time"), where new software-gt-awake-time event's
non-pmu-event-style makes event parser conflict with software PMU.

If we allow PE_PMU_EVENT_PRE to be parsed as PMU name, we fix the
conflict and the following character '/' for PMU or '-' for
non-pmu-event-style event allows parser to decide what even is
specified.

Fixes: 8c3b1ba0e7 ("drm/i915/gt: Track the overall awake/busy time")
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210301122315.63471-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:27 -03:00
Jiri Olsa 36bc511f63 perf daemon: Fix running test for non root user
John reported that the daemon test is not working for non root user.
Changing the tests configurations so it's allowed to run under normal
user.

Fixes: 2291bb915b ("perf tests: Add daemon 'list' command test")
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210301122510.64402-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:27 -03:00
Jiri Olsa 31bf4e7cb6 perf daemon: Fix control fifo permissions
Add proper mode for mkfifo calls to get read and write permissions for
user. We can't use O_RDWR in here, changing to standard permission
value.

Fixes: 6a6d1804a1 ("perf daemon: Set control fifo for session")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210301122510.64402-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:26 -03:00
Antonio Terceiro dacfc08dca perf build: Fix ccache usage in $(CC) when generating arch errno table
This was introduced by commit e4ffd066ff ("perf: Normalize gcc
parameter when generating arch errno table").

Assuming the first word of $(CC) is the actual compiler breaks usage
like CC="ccache gcc": the script ends up calling ccache directly with
gcc arguments, what fails. Instead of getting the first word, just
remove from $(CC) any word that starts with a "-". This maintains the
spirit of the original patch, while not breaking ccache users.

Fixes: e4ffd066ff ("perf: Normalize gcc parameter when generating arch errno table")
Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Zhe <zhe.he@windriver.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210224130046.346977-1-antonio.terceiro@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:26 -03:00
Ian Rogers b55ff1d145 perf tools: Fix documentation of verbose options
Option doesn't take a value, make sure the man pages agree. For example:

  $ perf evlist --verbose=1
   Error: option `verbose' takes no value

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210226183145.1878782-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:26 -03:00
Ian Rogers 137a525893 perf traceevent: Ensure read cmdlines are null terminated.
Issue detected by address sanitizer.

Fixes: cd4ceb6343 ("perf util: Save pid-cmdline mapping into tracing header")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210226221431.1985458-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:26 -03:00
Athira Rajeev 394e4306b0 perf bench numa: Fix the condition checks for max number of NUMA nodes
In systems having higher node numbers available like node
255, perf numa bench will fail with SIGABORT.

  <<>>
  perf: bench/numa.c:1416: init: Assertion `!(g->p.nr_nodes > 64 || g->p.nr_nodes < 0)' failed.
  Aborted (core dumped)
  <<>>

Snippet from 'numactl -H' below on a powerpc system where the highest
node number available is 255:

  available: 6 nodes (0,8,252-255)
  node 0 cpus: <cpu-list>
  node 0 size: 519587 MB
  node 0 free: 516659 MB
  node 8 cpus: <cpu-list>
  node 8 size: 523607 MB
  node 8 free: 486757 MB
  node 252 cpus:
  node 252 size: 0 MB
  node 252 free: 0 MB
  node 253 cpus:
  node 253 size: 0 MB
  node 253 free: 0 MB
  node 254 cpus:
  node 254 size: 0 MB
  node 254 free: 0 MB
  node 255 cpus:
  node 255 size: 0 MB
  node 255 free: 0 MB
  node distances:
  node   0   8  252  253  254  255

Note: <cpu-list> expands to actual cpu list in the original output.
These nodes 252-255 are to represent the memory on GPUs and are valid
nodes.

The perf numa bench init code has a condition check to see if the number
of NUMA nodes (nr_nodes) exceeds MAX_NR_NODES. The value of MAX_NR_NODES
defined in perf code is 64. And the 'nr_nodes' is the value from
numa_max_node() which represents the highest node number available in the
system. In some systems where we could have NUMA node 255, this condition
check fails and results in SIGABORT.

The numa benchmark uses static value of MAX_NR_NODES in the code to
represent size of two NUMA node arrays and node bitmask used for setting
memory policy. Patch adds a fix to dynamically allocate size for the
two arrays and bitmask value based on the node numbers available in the
system. With the fix, perf numa benchmark will work with node configuration
on any system and thus removes the static MAX_NR_NODES value.

Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/1614271802-1503-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:25 -03:00
Dmitry Safonov ffc52b7ae5 perf diff: Don't crash on freeing errno-session on the error path
__cmd_diff() sets result of perf_session__new() to d->session.

In case of failure, it's errno and perf-diff may crash with:

  failed to open perf.data: Permission denied
  Failed to open perf.data
  Segmentation fault (core dumped)

From the coredump:

0  0x00005569a62b5955 in auxtrace__free (session=0xffffffffffffffff)
    at util/auxtrace.c:2681
1  0x00005569a626b37d in perf_session__delete (session=0xffffffffffffffff)
    at util/session.c:295
2  perf_session__delete (session=0xffffffffffffffff) at util/session.c:291
3  0x00005569a618008a in __cmd_diff () at builtin-diff.c:1239
4  cmd_diff (argc=<optimized out>, argv=<optimized out>) at builtin-diff.c:2011
[..]

Funny enough, it won't always crash. For me it crashes only if failed
file is second in cmd-line: the reason is that cmd_diff() check files for
branch-stacks [in check_file_brstack()] and if the first file doesn't
have brstacks, it doesn't proceed to try open other files from cmd-line.

Check d->session before calling perf_session__delete().

Another solution would be assigning to temporary variable, checking it,
but I find it easier to follow with IS_ERR() check in the same function.
After some time it's still obvious why the check is needed, and with
temp variable it's possible to make the same mistake.

Committer testing:

  $ perf record sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
  $ perf diff
  failed to open perf.data.old: No such file or directory
  Failed to open perf.data.old
  $ perf record sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
  $ perf diff
  # Event 'cycles:u'
  #
  # Baseline  Delta Abs  Shared Object     Symbol
  # ........  .........  ................  ..........................
  #
       0.92%    +87.66%  [unknown]         [k] 0xffffffff8825de16
      11.39%     +0.04%  ld-2.32.so        [.] __GI___tunables_init
      87.70%             ld-2.32.so        [.] _dl_check_map_versions
  $ sudo chown root:root perf.data
  [sudo] password for acme:
  $ perf diff
  failed to open perf.data: Permission denied
  Failed to open perf.data
  Segmentation fault (core dumped)
  $

After the patch:

  $ perf diff
  failed to open perf.data: Permission denied
  Failed to open perf.data
  $

Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: dmitry safonov <dima@arista.com>
Link: http://lore.kernel.org/lkml/20210302023533.1572231-1-dima@arista.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:25 -03:00
Andreas Wendleder 2b1919ec83 perf tools: Clean 'generated' directory used for creating the syscall table on x86
Remove generated directory tools/perf/arch/x86/include/generated.

Signed-off-by: Andreas Wendleder <andreas.wendleder@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210301185642.163396-1-gonsolo@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:25 -03:00
Jiri Olsa 762323eb39 perf build: Move feature cleanup under tools/build
Arnaldo reported issue for following build command:

  $ rm -rf /tmp/krava; mkdir /tmp/krava; make O=/tmp/krava clean
    CLEAN    config
  /bin/sh: line 0: cd: /tmp/krava/feature/: No such file or directory
  ../../scripts/Makefile.include:17: *** output directory "/tmp/krava/feature/" does not exist.  Stop.
  make[1]: *** [Makefile.perf:1010: config-clean] Error 2
  make: *** [Makefile:90: clean] Error 2

The problem is that now that we include scripts/Makefile.include
in feature's Makefile (which is fine and needed), we need to ensure
the OUTPUT directory exists, before executing (out of tree) clean
command.

Removing the feature's cleanup from perf Makefile and fixing
feature's cleanup under build Makefile, so it now checks that
there's existing OUTPUT directory before calling the clean.

Fixes: 211a741cd3 ("tools: Factor Clang, LLC and LLVM utils definitions")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13-git
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210224150831.409639-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:24 -03:00
Pierre Gondois ded2e511a8 perf tools: Cast (struct timeval).tv_sec when printing
The musl-libc [1] defines (struct timeval).tv_sec as a 'long long' for
arm and other architectures. The default build having a '-Wformat' flag,
not casting the field when printing prevents from building perf.

This patch casts the (struct timeval).tv_sec fields to the expected
format.

[1] git://git.musl-libc.org/musl

Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Douglas.raillard@arm.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210224182410.5366-1-Pierre.Gondois@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:24 -03:00
Arnaldo Carvalho de Melo 21b7e35bdf tools headers UAPI: Sync kvm.h headers with the kernel sources
To pick the changes in:

  d9a47edabc ("KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR")
  8d4e7e8083 ("KVM: x86: declare Xen HVM shared info capability and add test case")
  40da8ccd72 ("KVM: x86/xen: Add event channel interrupt vector upcall")

These new IOCTLs are now supported on 'perf trace':

  $ tools/perf/trace/beauty/kvm_ioctl.sh > before
  $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
  $ tools/perf/trace/beauty/kvm_ioctl.sh > after
  $ diff -u before after
  --- before	2021-02-23 09:55:46.229058308 -0300
  +++ after	2021-02-23 09:55:57.509308058 -0300
  @@ -91,6 +91,10 @@
   	[0xc1] = "GET_SUPPORTED_HV_CPUID",
   	[0xc6] = "X86_SET_MSR_FILTER",
   	[0xc7] = "RESET_DIRTY_RINGS",
  +	[0xc8] = "XEN_HVM_GET_ATTR",
  +	[0xc9] = "XEN_HVM_SET_ATTR",
  +	[0xca] = "XEN_VCPU_GET_ATTR",
  +	[0xcb] = "XEN_VCPU_SET_ATTR",
   	[0xe0] = "CREATE_DEVICE",
   	[0xe1] = "SET_DEVICE_ATTR",
   	[0xe2] = "GET_DEVICE_ATTR",
  $

Addressing this perf build warning:
  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
  diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h

Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:23 -03:00
Arnaldo Carvalho de Melo 303550a447 tools headers UAPI s390: Sync ptrace.h kernel headers
To pick up the changes from:

  56e62a7370 ("s390: convert to generic entry")

That only adds two new defines, so shouldn't cause problems when
building the BPF selftests.

Silencing this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/ptrace.h' differs from latest version at 'arch/s390/include/uapi/asm/ptrace.h'
  diff -u tools/arch/s390/include/uapi/asm/ptrace.h arch/s390/include/uapi/asm/ptrace.h

Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:23 -03:00
Arnaldo Carvalho de Melo add76c0113 perf arch powerpc: Sync powerpc syscall.tbl with the kernel sources
To get the changes in:

  fbcee2ebe8 ("powerpc/32: Always save non volatile GPRs at syscall entry")

That shouldn't cause any change in tooling, just silences the following
tools/perf/ build warning:

  Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'

Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:23 -03:00
Arnaldo Carvalho de Melo 1e61463cfc tools headers UAPI: Sync openat2.h with the kernel sources
To pick the changes in:

  99668f6180 ("fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED")

That don't result in any change in tooling, only silences this perf
build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/openat2.h' differs from latest version at 'include/uapi/linux/openat2.h'
  diff -u tools/include/uapi/linux/openat2.h include/uapi/linux/openat2.h

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:22 -03:00
Arnaldo Carvalho de Melo c2446944b3 tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
To pick the changes in:

  8c3b1ba0e7 ("drm/i915/gt: Track the overall awake/busy time")
  348fb0cb0a ("drm/i915/pmu: Deprecate I915_PMU_LAST and optimize state tracking")

That don't result in any change in tooling:

  $ tools/perf/trace/beauty/drm_ioctl.sh > before
  $ cp include/uapi/drm/i915_drm.h tools/include/uapi/drm/i915_drm.h
  $ tools/perf/trace/beauty/drm_ioctl.sh > after
  $ diff -u before after
  $

Only silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
  diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:22 -03:00
Arnaldo Carvalho de Melo 3ae0415d0b tools headers UAPI: Update tools's copy of drm.h headers
Picking the changes from:

  0e0dc44800 ("drm/doc: demote old doc-comments in drm.h")

Silencing these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
  diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h

No changes in tooling as these are just C comment documentation changes.

Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-06 16:54:22 -03:00
Geert Uytterhoeven a65a802aad m68k: Fix virt_addr_valid() W=1 compiler warnings
If CONFIG_DEBUG_SG=y, and CONFIG_MMU=y:

    include/linux/scatterlist.h: In function ‘sg_set_buf’:
    arch/m68k/include/asm/page_mm.h:174:49: warning: ordered comparison of pointer with null pointer [-Wextra]
      174 | #define virt_addr_valid(kaddr) ((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory)
	  |                                                 ^~

or CONFIG_MMU=n:

    include/linux/scatterlist.h: In function ‘sg_set_buf’:
    arch/m68k/include/asm/page_no.h:33:50: warning: ordered comparison of pointer with null pointer [-Wextra]
       33 | #define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
	  |                                                  ^~

Fix this by doing the comparison in the "unsigned long" instead of the
"void *" domain.

Note that for now this is only seen when compiling btrfs, due to commit
e9aa7c285d ("btrfs: enable W=1 checks for btrfs"), but as people
are doing more W=1 compile testing, it will start to show up elsewhere,
too.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://lore.kernel.org/r/20210305084122.4118826-1-geert@linux-m68k.org
2021-03-06 14:15:07 +01:00
Linus Torvalds a38fd87484 Linux 5.12-rc2 2021-03-05 17:33:41 -08:00
Linus Torvalds f3ed4de6cc RDMA 5.12 first rc pull request
- Fix corner cases in the rxe reference counting cleanup that are causing
   regressions in blktests for SRP
 
 - Two kdoc fixes so W=1 is clean
 
 - Missing error return in error unwind for mlx5
 
 - Wrong lock type nesting in IB CM
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAmBCeEwACgkQOG33FX4g
 mxohmQ/7Bnf52Ay59dqdQzc8nDPXMwQ5ejZke+MnYZG3j79UqNQrbEnLJ8Y2BlQU
 IkpdTi8zUHm69GH7Ix9m/FsW52XFUuq2OEfGLvZNRUhi7hGEmc6llvfCK9y6a4Mt
 VEpyo7vC4QvA1OvMBF3Zv91jylKPJt5U51OuRtbh+6eoS6oVm7ajjOay+USYT/kX
 3zftTd6DUg6vpUP5j2WvjocgKUVGsh8GiyA3xC7u7AUTemcxvZ40wB535fLpn1JC
 ObU8aiRKw0Ib5JbRukCFFBV13kmA3lnAEy0SktPVhIoeUnF0m1vNtAJrdnHsWPxW
 lxtAXA3bN3oINhsEhnBllONKRxlqsUz7KT5bVAehsl8LENNLHhJWp0hwKawKK74K
 5MAQ+P6CIW8TLMKeOcYMXBD2UiElc9sdhYsDliM7leclftwOO5gFI4WgTWrQwxvl
 m+KewiByT6pzK7oyGvg9w/dl3y7atzy8y/7uMAfI2L6oL43z9yt24hHQTo3Z7UM7
 /bbSas/yRbZujB7qE45c6NvwRFQk6mYTK0Is0huMWOLn0Zf0fVcy3um0q+OKQ7At
 VS1Z7Fhy+ev1Lk764n5rmVUx8NWDlXkzwX7qk7SnQk7dWQ5lNFbziFDKmkiKgcAa
 //oN0I/FbAM4FjhKImRzbXJiLdULxJCqpfQ5VXbUXlfXdpzjabY=
 =j5ZU
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "Nothing special here, though Bob's regression fixes for rxe would have
  made it before the rc cycle had there not been such strong winter
  weather!

   - Fix corner cases in the rxe reference counting cleanup that are
     causing regressions in blktests for SRP

   - Two kdoc fixes so W=1 is clean

   - Missing error return in error unwind for mlx5

   - Wrong lock type nesting in IB CM"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()
  RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()
  RDMA/rxe: Fix missed IB reference counting in loopback
  RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc
  RDMA/mlx5: Set correct kernel-doc identifier
  IB/mlx5: Add missing error code
  RDMA/rxe: Fix missing kconfig dependency on CRYPTO
  RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep
2021-03-05 17:27:59 -08:00
Linus Torvalds de5bd6c54b gcc-plugins fixes for v5.12-rc2
- Fix coding style issues (Jason Yan)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmBCursACgkQiXL039xt
 wCZWzw//aBKQN8oUisNVhzWnUOpXEFV1GfJPaqgdZv89fCSnC20ojxzxXG4bTVod
 mnDvkYYAce3A8uLyACdt2iVdXCKF5LbiglkipqK6S4N/0DzoN4IBhgEtmNxMswjc
 LwXTzG3R7lu6J2CQatk0uRd2QLVWBHkjyMWRBpg3ryYJoj2ROscWlCL86u3Kdwyh
 2XKozHs+mTrDz7sOHeDlEfeJTF7AniN3Px6ajf0st0up5NIiZ70uuaHqhKMWuYji
 4fnO2Pf2G0b9QaB6W7k0S/M2VGhmd+1h3psI9PJJ3glrKe3WsHRm9Akq8MF08vr7
 UEvYqEPuU6/YJDEXJ3C22xEeN9HBfXgrX1qAf/1/mE9c1AGvIPNmQYp+xE1xSXzO
 79GRPf1OrZLntJuQG9ir1BrhryehrynhH2dS0F1ByT2u/lYpGw9o+vu7rpnQ6DUR
 sjnhJSCyzDMHdZPzaUldFaydEquDE5LohY2TQDeWtT6tBtkjIONj0YqGlm2IlzFL
 OlM0YkjSd4fDlKIhMbP/Vm+ScAJfs3dR7cWwn3F3JIoDTZf5f4IAbsKCyPJ3wIHm
 A0BEXs9bZ4MCmNPtZDuSGExnHs+te4yBoahkvw/84TG2PBJVOCDdB4F7noFu47vJ
 1QvL7TiRTr782fqZQwSTUZZHxmc6NhZRySsXRIHBA4AyboPnnYk=
 =oow8
 -----END PGP SIGNATURE-----

Merge tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull gcc-plugins fixes from Kees Cook:
 "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have
  been reported a couple times now by static analyzers, so best to get
  them fixed to reduce the noise. :)

   - Fix coding style issues (Jason Yan)"

* tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: latent_entropy: remove unneeded semicolon
  gcc-plugins: structleak: remove unneeded variable 'ret'
2021-03-05 17:23:03 -08:00
Linus Torvalds 8b24ef4478 pstore fixes for v5.12-rc2
- Rate-limit ECC warnings (Dmitry Osipenko)
 
 - Fix error path check for NULL (Tetsuo Handa)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmBCuf4ACgkQiXL039xt
 wCZ0dBAAmKEctNeyoE8TJv8Uglae41bs+9hR3Sa8E1NHE24kVPoPnCjctsTPGehN
 PyW5rG1/22hgt787g6ZqG/Qpsp0t8s+MfQCUdynlrJl5ll51nq67jCkvl47tSyj2
 sEWCm8eRm7lw1favGTd5PHZNdcBmk7OQdLiBl80BWGKcgAwxhSzVFvVNgLXCHJXp
 SiVfDuvrEYsvq/ePjhAd0y1X1STiYCjcsd4vScMnkDBLYCtIfArfxpuLN4MkWbDE
 SENIynnI/8mU6axtVo67w2tClYD6fnM7ahCX4AhjbzC2PgXW5ckalnmf/kZ2Rtoj
 /8l69paj6Z69FXJyHQ7RAgU+SiABSnclkE7Erfv7vAXxO62dYjfCe8v1QCiWIZu4
 agYaV5kS8hIgRQf5u2Ft9m6Oh/oO7m8xpUmFf57gO3t84WsclQuDSbaIsbSPMnAn
 EIwYh06Uh3WILUmAKGytXChxksxg9ltoDi9SbAyfC7jdRQ0OUsoDGoXYOpcRtbYd
 ORM+Ul4l3bHsWMr4ffDuICCHNXHZ9/N15Z/q3BWLO03Zes1N0GLYUysLWmMxJyuQ
 /6rvGUcuZJXOCaTz/j2nnZImRT70zNxFZ1cNSuNh6IJxLiKdygd/yvSIt9BDwa/u
 LI+BadgnAfnb+Mj7brAbQwQcO5OA/+p0WkwZ2qDp05yVSF+H4ak=
 =H+59
 -----END PGP SIGNATURE-----

Merge tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull pstore fixes from Kees Cook:

 - Rate-limit ECC warnings (Dmitry Osipenko)

 - Fix error path check for NULL (Tetsuo Handa)

* tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Rate-limit "uncorrectable error in header" message
  pstore: Fix warning in pstore_kill_sb()
2021-03-05 17:21:25 -08:00
Linus Torvalds 63dcd69d9b Fix DM verity target's optional Forward Error Correction (FEC) for
Reed-Solomon roots that are unaligned to block size.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmBCgmkTHHNuaXR6ZXJA
 cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWlF9B/481eKdOYK5RLj6LneVf10niUACEN0G
 tp8CeKh2wEcTjX+9pWxvigAE7FZnvD0sCts3eRCd8egkdV3L9uHyaCHU9V8iGP8L
 dSjHXjbwbOumww5FY1ddx2ZiRImcU7YpEj5TrUZi2TyoAB2jOblDgaUt8jWsbppa
 8miPUZi0Kp56Z5EsFJcT8dYbIlLfUpD/XfZ0hjqMoc9XZOeoGvYqpYX1pZgIfj2s
 F23Dru858zqjv7OLmIgjzSgS0dZSwdLMUpKInaW1AipvNQpWSuh2DQdP7Ail3+yy
 gUirpBjztoYCfqwpQTJpGnnb47tECYUXef6dI7xR5bXnyaX8CG5bRvVV
 =a00f
 -----END PGP SIGNATURE-----

Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:
 "Fix DM verity target's optional Forward Error Correction (FEC) for
  Reed-Solomon roots that are unaligned to block size"

* tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity: fix FEC for RS roots unaligned to block size
  dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
2021-03-05 13:25:23 -08:00