Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Preserve eflags and gpa1 aux during entry/exit into kernel as these
could be modified by kernel mode
These registers used by compare exchange instructions.
- GPA1 is used for compare value,
- EFLAGS got bit reflects atomic operation response.
EFLAGS is zeroed for each new user task so it won't get its
parent value.
Signed-off-by: Liav Rehana <liavr@mellanox.com>
Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Accumulator is present in configs with FPU and/or DSP MPY (mpy > 6)
Instead of doing this in pt_regs (and thus every kernel entry/exit),
this could have been done in context switch (and for user task only) as
currently kernel doesn't clobber these registers for its own accord.
However we will soon start using 64-bit multiply instructions for kernel
which can clobber these. Also gcc folks also plan to start using these
as GPRs, hence better to always save/restore them
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
KGDB fails to build after f51e2f1911 ("ARC: make sure instruction_pointer()
returns unsigned value")
The hack to force one specific reg to unsigned backfired. There's no
reason to keep the regs signed after all.
| CC arch/arc/kernel/kgdb.o
|../arch/arc/kernel/kgdb.c: In function 'kgdb_trap':
| ../arch/arc/kernel/kgdb.c:180:29: error: lvalue required as left operand of assignment
| instruction_pointer(regs) -= BREAK_INSTR_SIZE;
Reported-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com>
Fixes: f51e2f1911 ("ARC: make sure instruction_pointer() returns unsigned value")
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Currently instruction_pointer() returns pt_regs->ret and so return value
is of type "long", which implicitly stands for "signed long".
While that's perfectly fine when dealing with 32-bit values if return
value of instruction_pointer() gets assigned to 64-bit variable sign
extension may happen.
And at least in one real use-case it happens already.
In perf_prepare_sample() return value of perf_instruction_pointer()
(which is an alias to instruction_pointer() in case of ARC) is assigned
to (struct perf_sample_data)->ip (which type is "u64").
And what we see if instuction pointer points to user-space application
that in case of ARC lays below 0x8000_0000 "ip" gets set properly with
leading 32 zeros. But if instruction pointer points to kernel address
space that starts from 0x8000_0000 then "ip" is set with 32 leadig
"f"-s. I.e. id instruction_pointer() returns 0x8100_0000, "ip" will be
assigned with 0xffff_ffff__8100_0000. Which is obviously wrong.
In particular that issuse broke output of perf, because perf was unable
to associate addresses like 0xffff_ffff__8100_0000 with anything from
/proc/kallsyms.
That's what we used to see:
----------->8----------
6.27% ls [unknown] [k] 0xffffffff8046c5cc
2.96% ls libuClibc-0.9.34-git.so [.] memcpy
2.25% ls libuClibc-0.9.34-git.so [.] memset
1.66% ls [unknown] [k] 0xffffffff80666536
1.54% ls libuClibc-0.9.34-git.so [.] 0x000224d6
1.18% ls libuClibc-0.9.34-git.so [.] 0x00022472
----------->8----------
With that change perf output looks much better now:
----------->8----------
8.21% ls [kernel.kallsyms] [k] memset
3.52% ls libuClibc-0.9.34-git.so [.] memcpy
2.11% ls libuClibc-0.9.34-git.so [.] malloc
1.88% ls libuClibc-0.9.34-git.so [.] memset
1.64% ls [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore
1.41% ls [kernel.kallsyms] [k] __d_lookup_rcu
----------->8----------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-linux-dev@synopsys.com
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* reduce editor lines taken by pt_regs
* ARCompact ISA specific part of TLB Miss handlers clubbed together
* cleanup some comments
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
pt_regs->event was set with artificial values to identify the low level
system event (syscall trap / breakpoint trap / exceptions / interrupts)
With r8 saving out of the way, the full word can be used to save real
ECR (Exception Cause Register) which helps idenify the event naturally,
including additional info such as cause code, param.
Only for Interrupts, where ECR is not applicable, do we resort to
synthetic non ECR values.
SAVE_ALL_TRAP/EXCEPTIONS can now be merged as they both use ECR with
different runtime values.
The ptrace helpers now use the sub-fields of ECR to distinguish the
events (e.g. vector 0x25 is trap, param 0 is syscall...)
The following benefits will follow:
(1) This centralizes the location of where ECR is saved and will allow
the cleanup of task->thread.cause_code ECR placeholder which is set
in non-uniform way. Then ARC VM code can safely rely on it being
there for purpose of finer grained VM_EXEC dcache flush (based on
exec fault: I-TLB Miss)
(2) Further, ECR being passed around from low level handlers as arg can
be eliminated as it is part of standard reg-file in pt_regs
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
(This is a VERY IMP change for low level interrupt/exception handling)
-----------------------------------------------------------------------
WHAT
-----------------------------------------------------------------------
* User 25 now saved in pt_regs->user_r25 (vs. tsk->thread_info.user_r25)
* This allows Low level interrupt code to unconditionally save r25
(vs. the prev version which would only do it for U->K transition).
Ofcourse for nested interrupts, only the pt_regs->user_r25 of
bottom-most frame is useful.
* simplifies the interrupt prologue/epilogue
* Needed for ARCv2 ISA code and done here to keep design similar with
ARCompact event handling
-----------------------------------------------------------------------
WHY
-------------------------------------------------------------------------
With CONFIG_ARC_CURR_IN_REG, r25 is used to cache "current" task pointer
in kernel mode. So when entering kernel mode from User Mode
- user r25 is specially safe-kept (it being a callee reg is NOT part of
pt_regs which are saved by default on each interrupt/trap/exception)
- r25 loaded with current task pointer.
Further, if interrupt was taken in kernel mode, this is skipped since we
know that r25 already has valid "current" pointer.
With 2 level of interrupts in ARCompact ISA, detecting this is difficult
but still possible, since we could be in kernel mode but r25 not already saved
(in fact the stack itself might not have been switched).
A. User mode
B. L1 IRQ taken
C. L2 IRQ taken (while on 1st line of L1 ISR)
So in #C, although in kernel mode, r25 not saved (infact SP not
switched at all)
Given that ARcompact has manual stack switching, we could use a bit of
trickey - The low level code would make sure that SP is only set to kernel
mode value at the very end (after saving r25). So a non kernel mode SP,
even if in kernel mode, meant r25 was NOT saved.
The same paradigm won't work in ARCv2 ISA since SP is auto-switched so
it's setting can't be delayed/constrained.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This is trickier than prev two:
* context switching code saves kernel mode callee regs in the format of
struct callee_regs thus needs adjustment. This also reduces the height
of topmost kernel stack frame by 1 word.
* Since kernel stack unwinder is sensitive to height of topmost kernel
stack frame, that needs a word of adjustment too.
ptrace needs a bit of updating since pt_regs now diverges from
user_regs_struct.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Historically, pt_regs would end at offset of 1 word from end of stack
page.
----------------- -> START of page (task->stack)
| |
| thread_info |
-----------------
| |
^ ~ ~
| ~ ~
| | |
| | | <---- pt_regs used to END here
-----------------
| 1 word GUTTER |
----------------- -> End of page (START of kernel stack)
This required special "one-off" considerations in low level code.
The root cause is very likely assumption of "empty" SP by the original
ARC kernel hackers, despite ARC700 always been "full" SP.
So finally RIP one word gutter !
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
orig_r8_IS_EXCPN and orig_r8_IS_BRKPT were same values due to a
copy/paste error. Although it looks bad and is wrong, it really doesn't
affect gdb working.
orig_r8_IS_BRKPT is the one relevant to debugging (breakpoints), since
it is used to provide EFA vs. ERET to a ptrace "stop_pc" request.
So when gdb has inserted a breakpoint, orig_r8_IS_BRKPT is already set,
and anything else (i.e. orig_r8_IS_EXCPN) becoming same as it, really
doesn't hurt gdb. The corollary case, could be nasty but nobody uses the
ptrace "stop_pc" request in that case
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
1. ./genfilelist.pl arch/arc/include/asm/
2. Create arch/arc/include/uapi/asm/Kbuild as follows
+# UAPI Header export list
+include include/uapi/asm-generic/Kbuild.asm
3. ./disintegrate-one.pl arch/arc/include/{,uapi/}asm/<above-list>
4. Edit arch/arc/include/asm/Kbuild to remove ref to
asm-generic/Kbuild.asm
- To work around empty uapi/asm/setup.h added a placholder comment.
- Also a manual #ifdef __ASSEMBLY__ for a late ptrace change
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: David Howells <dhowells@redhat.com>
ARC700 doesn't natively support unaligned access, but can be emulated
-Unaligned Access Exception
-Disassembly at the Fault address to find the exact insn (long/short)
Also per Arnd's comment, we runtime control it using 2 sysctl knobs:
* SYSCTL_ARCH_UNALIGN_ALLOW: Runtime enable/disble
* SYSCTL_ARCH_UNALIGN_NO_WARN: Warn on each emulation attempt
Originally contributed by Tim Yao <tim.yao@amlogic.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Tim Yao <tim.yao@amlogic.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Per Al Viro's "signals for dummies" https://lkml.org/lkml/2012/12/6/366
there are 3 golden rules for (not) restarting syscalls:
" What we need to guarantee is
* restarts do not happen on signals caught in interrupts or exceptions
* restarts do not happen on signals caught in sigreturn()
* restart should happen only once, even if we get through do_signal()
many times."
ARC Port already handled #1, this patch fixes#2 and #3.
We use the additional state in pt_regs->orig_r8 to ckh if restarting
has already been done once.
Thanks to Al Viro for spotting this.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
To avoid multiple syscall restarts (multiple signals) or no restart at
all (sigreturn), we need just an extra bit of state "literally 1 bit" in
struct pt_regs. orig_r8 is the best place to do this, however given the
way it is encoded currently, we can't add anything simplistically.
Current orig_r8:
* syscalls -> 1 to NR_SYSCALLS
* Exceptions -> NR_SYSCALLS + 1
* Break-point-> NR_SYSCALLS + 2
In new scheme it is a bit-field
* lower short word contains the exact event type (and a new bit to represent
restart semantics : if syscall was already / can't be restarted)
* upper short word optionally containing the syscall num - needed by
likes of tracehooks etc
This patch only changes how orig_r8 is organised and nothing should
change behaviourily.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
This includes support for generic clone/for/vfork/execve
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
* L1_CACHE_SHIFT
* PAGE_SIZE, PAGE_OFFSET
* struct pt_regs, struct user_regs_struct
* struct thread_struct, cpu_relax(), task_pt_regs(), start_thread(), ...
* struct thread_info, THREAD_SIZE, INIT_THREAD_INFO(), TIF_*, ...
* BUG()
* ELF_*
* Elf_*
To disallow user-space visibility into some of the core kernel data-types
such as struct pt_regs, #ifdef __KERNEL__ which also makes the UAPI header
spit (further patch in the series) to NOT export it to asm/uapi/ptrace.h
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Jonas Bonn <jonas.bonn@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Thomas Gleixner