Currently, only one PMU in a context gets disabled during unthrottling
and event_sched_{out,in}(), however, events in one context may belong to
different pmus, which results in PMUs being reprogrammed while they are
still enabled.
This means that mixed PMU use [which is rare in itself] resulted in
potentially completely unreliable results: corrupted events, bogus
results, etc.
This patch temporarily disables PMUs that correspond to
each event in the context while these events are being modified.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: http://lkml.kernel.org/r/1387196256-8030-1-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently we only allocate a single cpu hashtable for per-cpu
swevents; do away with this optimization for it is fragile in the face
of things like perf_pmu_migrate_context().
The easiest thing is to make sure all CPUs are consistent wrt state.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130913111447.GN31370@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add two trivial helpers list_next_entry() and list_prev_entry(), they
can have a lot of users including list.h itself. In fact the 1st one is
already defined in events/core.c and bnx2x_sp.c, so the patch simply
moves the definition to list.h.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull perf updates from Ingo Molnar:
"As a first remark I'd like to note that the way to build perf tooling
has been simplified and sped up, in the future it should be enough for
you to build perf via:
cd tools/perf/
make install
(ie without the -j option.) The build system will figure out the
number of CPUs and will do a parallel build+install.
The various build system inefficiencies and breakages Linus reported
against the v3.12 pull request should now be resolved - please
(re-)report any remaining annoyances or bugs.
Main changes on the perf kernel side:
* Performance optimizations:
. perf ring-buffer code optimizations, by Peter Zijlstra
. perf ring-buffer code optimizations, by Oleg Nesterov
. x86 NMI call-stack processing optimizations, by Peter Zijlstra
. perf context-switch optimizations, by Peter Zijlstra
. perf sampling speedups, by Peter Zijlstra
. x86 Intel PEBS processing speedups, by Peter Zijlstra
* Enhanced hardware support:
. for Intel Ivy Bridge-EP uncore PMUs, by Zheng Yan
. for Haswell transactions, by Andi Kleen, Peter Zijlstra
* Core perf events code enhancements and fixes by Oleg Nesterov:
. for uprobes, if fork() is called with pending ret-probes
. for uprobes platform support code
* New ABI details by Andi Kleen:
. Report x86 Haswell TSX transaction abort cost as weight
Main changes on the perf tooling side (some of these tooling changes
utilize the above kernel side changes):
* 'perf report/top' enhancements:
. Convert callchain children list to rbtree, greatly reducing the
time taken for callchain processing, from Namhyung Kim.
. Add new COMM infrastructure, further improving histogram
processing, from Frédéric Weisbecker, one fix from Namhyung Kim.
. Add /proc/kcore based live-annotation improvements, including
build-id cache support, multi map 'call' instruction navigation
fixes, kcore address validation, objdump workarounds. From
Adrian Hunter.
. Show progress on histogram collapsing, that can take a long
time, from Namhyung Kim.
. Add --max-stack option to limit callchain stack scan in 'top'
and 'report', improving callchain processing when reducing the
stack depth is an option, from Waiman Long.
. Add new option --ignore-vmlinux for perf top, from Willy
Tarreau.
* 'perf trace' enhancements:
. 'perf trace' now can can use a 'perf probe' dynamic tracepoints
to hook into the userspace -> kernel pathname copy so that it
can map fds to pathnames without reading /proc/pid/fd/ symlinks.
From Arnaldo Carvalho de Melo.
. Show VFS path associated with fd in live sessions, using a
'vfs_getname' 'perf probe' created dynamic tracepoint or by
looking at /proc/pid/fd, from Arnaldo Carvalho de Melo.
. Add 'trace' beautifiers for lots of syscall arguments, from
Arnaldo Carvalho de Melo.
. Implement more compact 'trace' output by suppressing zeroed
args, from Arnaldo Carvalho de Melo.
. Show thread COMM by default in 'trace', from Arnaldo Carvalho de
Melo.
. Add option to show full timestamp in 'trace', from David Ahern.
. Add 'record' command in 'trace', to record raw_syscalls:*, from
David Ahern.
. Add summary option to dump syscall statistics in 'trace', from
David Ahern.
. Improve error messages in 'trace', providing hints about system
configuration steps needed for using it, from Ramkumar
Ramachandra.
. 'perf trace' now emits hints as to why tracing is not possible,
helping the user to setup the system to allow tracing in the
desired permission granularity, telling if the problem is due to
debugfs not being mounted or with not enough permission for
!root, /proc/sys/kernel/perf_event_paranoit value, etc. From
Arnaldo Carvalho de Melo.
* 'perf record' enhancements:
. Check maximum frequency rate for record/top, emitting better
error messages, from Jiri Olsa.
. 'perf record' code cleanups, from David Ahern.
. Improve write_output error message in 'perf record', from Adrian
Hunter.
. Allow specifying B/K/M/G unit to the --mmap-pages arguments,
from Jiri Olsa.
. Fix command line callchain attribute tests to handle the new
-g/--call-chain semantics, from Arnaldo Carvalho de Melo.
* 'perf kvm' enhancements:
. Disable live kvm command if timerfd is not supported, from David
Ahern.
. Fix detection of non-core features, from David Ahern.
* 'perf list' enhancements:
. Add usage to 'perf list', from David Ahern.
. Show error in 'perf list' if tracepoints not available, from
Pekka Enberg.
* 'perf probe' enhancements:
. Support "$vars" meta argument syntax for local variables,
allowing asking for all possible variables at a given probe
point to be collected when it hits, from Masami Hiramatsu.
* 'perf sched' enhancements:
. Address the root cause of that 'perf sched' stack initialization
build slowdown, by programmatically setting a big array after
moving the global variable back to the stack. Fix from Adrian
Hunter.
* 'perf script' enhancements:
. Set up output options for in-stream attributes, from Adrian
Hunter.
. Print addr by default for BTS in 'perf script', from Adrian
Juntmer
* 'perf stat' enhancements:
. Improved messages when doing profiling in all or a subset of
CPUs using a workload as the session delimitator, as in:
'perf stat --cpu 0,2 sleep 10s'
from Arnaldo Carvalho de Melo.
. Add units to nanosec-based counters in 'perf stat', from David
Ahern.
. Remove bogus info when using 'perf stat' -e cycles/instructions,
from Ramkumar Ramachandra.
* 'perf lock' enhancements:
. 'perf lock' fixes and cleanups, from Davidlohr Bueso.
* 'perf test' enhancements:
. Fixup PERF_SAMPLE_TRANSACTION handling in sample synthesizing
and 'perf test', from Adrian Hunter.
. Clarify the "sample parsing" test entry, from Arnaldo Carvalho
de Melo.
. Consider PERF_SAMPLE_TRANSACTION in the "sample parsing" test,
from Arnaldo Carvalho de Melo.
. Memory leak fixes in 'perf test', from Felipe Pena.
* 'perf bench' enhancements:
. Change the procps visible command-name of invididual benchmark
tests plus cleanups, from Ingo Molnar.
* Generic perf tooling infrastructure/plumbing changes:
. Separating data file properties from session, code
reorganization from Jiri Olsa.
. Fix version when building out of tree, as when using one of
these:
$ make help | grep perf
perf-tar-src-pkg - Build perf-3.12.0.tar source tarball
perf-targz-src-pkg - Build perf-3.12.0.tar.gz source tarball
perf-tarbz2-src-pkg - Build perf-3.12.0.tar.bz2 source tarball
perf-tarxz-src-pkg - Build perf-3.12.0.tar.xz source tarball
$
from David Ahern.
. Enhance option parse error message, showing just the help lines
of the options affected, from Namhyung Kim.
. libtraceevent updates from upstream trace-cmd repo, from Steven
Rostedt.
. Always use perf_evsel__set_sample_bit to set sample_type, from
Adrian Hunter.
. Memory and mmap leak fixes from Chenggang Qin.
. Assorted build fixes for from David Ahern and Jiri Olsa.
. Speed up and prettify the build system, from Ingo Molnar.
. Implement addr2line directly using libbfd, from Roberto Vitillo.
. Separate the GTK support in a separate libperf-gtk.so DSO, that
is only loaded when --gtk is specified, from Namhyung Kim.
. perf bash completion fixes and improvements from Ramkumar
Ramachandra.
. Support for Openembedded/Yocto -dbg packages, from Ricardo
Ribalda Delgado.
And lots and lots of other fixes and code reorganizations that did not
make it into the list, see the shortlog, diffstat and the Git log for
details!"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (300 commits)
uprobes: Fix the memory out of bound overwrite in copy_insn()
uprobes: Fix the wrong usage of current->utask in uprobe_copy_process()
perf tools: Remove unneeded include
perf record: Remove post_processing_offset variable
perf record: Remove advance_output function
perf record: Refactor feature handling into a separate function
perf trace: Don't relookup fields by name in each sample
perf tools: Fix version when building out of tree
perf evsel: Ditch evsel->handler.data field
uprobes: Export write_opcode() as uprobe_write_opcode()
uprobes: Introduce arch_uprobe->ixol
uprobes: Kill module_init() and module_exit()
uprobes: Move function declarations out of arch
perf/x86/intel: Add Ivy Bridge-EP uncore IRP box support
perf/x86/intel/uncore: Add filter support for IvyBridge-EP QPI boxes
perf: Factor out strncpy() in perf_event_mmap_event()
tools/perf: Add required memory barriers
perf: Fix arch_perf_out_copy_user default
perf: Update a stale comment
perf: Optimize perf_output_begin() -- address calculation
...
1. copy_insn() doesn't look very nice, all calculations are
confusing and it is not immediately clear why do we read
the 2nd page first.
2. The usage of inode->i_size is wrong on 32-bit machines.
3. "Instruction at end of binary" logic is simply wrong, it
doesn't handle the case when uprobe->offset > inode->i_size.
In this case "bytes" overflows, and __copy_insn() writes to
the memory outside of uprobe->arch.insn.
Yes, uprobe_register() checks i_size_read(), but this file
can be truncated after that. All i_size checks are racy, we
do this only to catch the obvious mistakes.
Change copy_insn() to call __copy_insn() in a loop, simplify
and fix the bytes/nbytes calculations.
Note: we do not care if we read extra bytes after inode->i_size
if we got the valid page. This is fine because the task gets the
same page after page-fault, and arch_uprobe_analyze_insn() can't
know how many bytes were actually read anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Commit aa59c53fd4 "uprobes: Change uprobe_copy_process() to dup
xol_area" has a stupid typo, we need to setup t->utask->vaddr but
the code wrongly uses current->utask.
Even with this bug dup_xol_work() works "in practice", but only
because get_unmapped_area(NULL, TASK_SIZE - PAGE_SIZE) likely
returns the same address every time.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Here's the big driver core / sysfs update for 3.13-rc1.
There's lots of dev_groups updates for different subsystems, as they all
get slowly migrated over to the safe versions of the attribute groups
(removing userspace races with the creation of the sysfs files.) Also
in here are some kobject updates, devres expansions, and the first round
of Tejun's sysfs reworking to enable it to be used by other subsystems
as a backend for an in-kernel filesystem.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlJ6xAMACgkQMUfUDdst+yk1kQCfcHXhfnrvFZ5J/mDP509IzhNS
ddEAoLEWoivtBppNsgrWqXpD1vi4UMsE
=JmVW
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / sysfs patches from Greg KH:
"Here's the big driver core / sysfs update for 3.13-rc1.
There's lots of dev_groups updates for different subsystems, as they
all get slowly migrated over to the safe versions of the attribute
groups (removing userspace races with the creation of the sysfs
files.) Also in here are some kobject updates, devres expansions, and
the first round of Tejun's sysfs reworking to enable it to be used by
other subsystems as a backend for an in-kernel filesystem.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (83 commits)
sysfs: rename sysfs_assoc_lock and explain what it's about
sysfs: use generic_file_llseek() for sysfs_file_operations
sysfs: return correct error code on unimplemented mmap()
mdio_bus: convert bus code to use dev_groups
device: Make dev_WARN/dev_WARN_ONCE print device as well as driver name
sysfs: separate out dup filename warning into a separate function
sysfs: move sysfs_hash_and_remove() to fs/sysfs/dir.c
sysfs: remove unused sysfs_get_dentry() prototype
sysfs: honor bin_attr.attr.ignore_lockdep
sysfs: merge sysfs_elem_bin_attr into sysfs_elem_attr
devres: restore zeroing behavior of devres_alloc()
sysfs: fix sysfs_write_file for bin file
input: gameport: convert bus code to use dev_groups
input: serio: remove bus usage of dev_attrs
input: serio: use DEVICE_ATTR_RO()
i2o: convert bus code to use dev_groups
memstick: convert bus code to use dev_groups
tifm: convert bus code to use dev_groups
virtio: convert bus code to use dev_groups
ipack: convert bus code to use dev_groups
...
set_swbp() and set_orig_insn() are __weak, but this is pointless
because write_opcode() is static.
Export write_opcode() as uprobe_write_opcode() for the upcoming
arm port, this way it can actually override set_swbp() and use
__opcode_to_mem_arm(bpinsn) instead if UPROBE_SWBP_INSN.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Currently xol_get_insn_slot() assumes that we should simply copy
arch_uprobe->insn[] which is (ignoring arch_uprobe_analyze_insn)
just the copy of the original insn.
This is not true for arm which needs to create another insn to
execute it out-of-line.
So this patch simply adds the new member, ->ixol into the union.
This doesn't make any difference for x86 and powerpc, but arm
can divorce insn/ixol and initialize the correct xol insn in
arch_uprobe_analyze_insn().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Turn module_init() into __initcall() and kill module_exit().
This code can't be compiled as a module so these module_*()
calls only add the confusion, especially if arch-dependant
code needs its own initialization hooks.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
While this is really minor, but strncpy() does the unnecessary
zero-padding till the end of tmp[16] and it is called every time
we are going to use the string literal.
Turn these strncpy()'s into the single strlcpy() under the new
label, saves 72 bytes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131017182417.GA17753@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The arch_perf_output_copy_user() default of
__copy_from_user_inatomic() returns bytes not copied, while all other
argument functions given DEFINE_OUTPUT_COPY() return bytes copied.
Since copy_from_user_nmi() is the odd duck out by returning bytes
copied where all other *copy_{to,from}* functions return bytes not
copied, change it over and ammend DEFINE_OUTPUT_COPY() to expect bytes
not copied.
Oddly enough DEFINE_OUTPUT_COPY() already returned bytes not copied
while expecting its worker functions to return bytes copied.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: will.deacon@arm.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20131030201622.GR16117@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Avoid touching the lost_event and sample_data cachelines twince. Its
not like we end up doing less work, but it might help to keep all
accesses to these cachelines in one place.
Due to code shuffle, this looses 4 bytes on x86_64-defconfig.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: james.hogan@imgtec.com
Cc: Vince Weaver <vince@deater.net>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Blanchard <anton@samba.org>
Link: http://lkml.kernel.org/n/tip-zfxnc58qxj0eawdoj31hhupv@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's no point in re-doing the memory-barrier when we fail the
cmpxchg(). Also placing it after the space reservation loop makes it
clearer it only separates the userpage->tail read from the data
stores.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: james.hogan@imgtec.com
Cc: Vince Weaver <vince@deater.net>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Blanchard <anton@samba.org>
Link: http://lkml.kernel.org/n/tip-c19u6egfldyx86tpyc3zgkw9@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add unlikely() annotations to 'slow' paths:
When having a sampling event but no output buffer; you have bigger
issues -- also the bail is still faster than actually doing the work.
When having a sampling event but a control page only buffer, you have
bigger issues -- again the bail is still faster than actually doing
work.
Optimize for the case where you're not loosing events -- again, not
doing the work is still faster but make sure that when you have to
actually do work its as fast as possible.
The typical watermark is 1/2 the buffer size, so most events will not
take this path.
Shrinks perf_output_begin() by 16 bytes on x86_64-defconfig.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: james.hogan@imgtec.com
Cc: Vince Weaver <vince@deater.net>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Blanchard <anton@samba.org>
Link: http://lkml.kernel.org/n/tip-wlg3jew3qnutm8opd0hyeuwn@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
By using CIRC_SPACE() we can obviate the need for perf_output_space().
Shrinks the size of perf_output_begin() by 17 bytes on
x86_64-defconfig.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: james.hogan@imgtec.com
Cc: Vince Weaver <vince@deater.net>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Blanchard <anton@samba.org>
Link: http://lkml.kernel.org/n/tip-vtb0xb0llebmsdlfn1v5vtfj@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
uprobe_copy_process() does nothing if the child shares ->mm with
the forking process, but there is a special case: CLONE_VFORK.
In this case it would be more correct to do dup_utask() but avoid
dup_xol(). This is not that important, the child should not unwind
its stack too much, this can corrupt the parent's stack, but at
least we need this to allow to ret-probe __vfork() itself.
Note: in theory, it would be better to check task_pt_regs(p)->sp
instead of CLONE_VFORK, we need to dup_utask() if and only if the
child can return from the function called by the parent. But this
needs the arch-dependant helper, and I think that nobody actually
does clone(same_stack, CLONE_VM).
Reported-by: Martin Cermak <mcermak@redhat.com>
Reported-by: David Smith <dsmith@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
This finally fixes the serious bug in uretprobes: a forked child
crashes if the parent called fork() with the pending ret probe.
Trivial test-case:
# perf probe -x /lib/libc.so.6 __fork%return
# perf record -e probe_libc:__fork perl -le 'fork || print "OK"'
(the child doesn't print "OK", it is killed by SIGSEGV)
If the child returns from the probed function it actually returns
to trampoline_vaddr, because it got the copy of parent's stack
mangled by prepare_uretprobe() when the parent entered this func.
It crashes because a) this address is not mapped and b) until the
previous change it doesn't have the proper->return_instances info.
This means that uprobe_copy_process() has to create xol_area which
has the trampoline slot, and its vaddr should be equal to parent's
xol_area->vaddr.
Unfortunately, uprobe_copy_process() can not simply do
__create_xol_area(child, xol_area->vaddr). This could actually work
but perf_event_mmap() doesn't expect the usage of foreign ->mm. So
we offload this to task_work_run(), and pass the argument via not
yet used utask->vaddr.
We know that this vaddr is fine for install_special_mapping(), the
necessary hole was recently "created" by dup_mmap() which skips the
parent's VM_DONTCOPY area, and nobody else could use the new mm.
Unfortunately, this also means that we can not handle the errors
properly, we obviously can not abort the already completed fork().
So we simply print the warning if GFP_KERNEL allocation (the only
possible reason) fails.
Reported-by: Martin Cermak <mcermak@redhat.com>
Reported-by: David Smith <dsmith@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
uprobe_copy_process() assumes that the new child doesn't need
->utask, it should be allocated by demand.
But this is not true if the forking task has the pending ret-
probes, the child should report them as well and thus it needs
the copy of parent's ->return_instances chain. Otherwise the
child crashes when it returns from the probed function.
Alternatively we could cleanup the child's stack, but this needs
per-arch changes and this is not what we want. At least systemtap
expects a .return in the child too.
Note: this change alone doesn't fix the problem, see the next
change.
Reported-by: Martin Cermak <mcermak@redhat.com>
Reported-by: David Smith <dsmith@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Currently xol_add_vma() uses get_unmapped_area() for area->vaddr,
but the next patches need to use the fixed address. So this patch
adds the new "vaddr" argument to __create_xol_area() which should
be used as area->vaddr if it is nonzero.
xol_add_vma() doesn't bother to verify that the predefined addr is
not used, insert_vm_struct() should fail if find_vma_links() detects
the overlap with the existing vma.
Also, __create_xol_area() doesn't need __GFP_ZERO to allocate area.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
No functional changes, preparation.
Extract the code which actually allocates/installs the new area
into the new helper, __create_xol_area().
While at it remove the unnecessary "ret = ENOMEM" and "ret = 0"
in xol_add_vma(), they both have no effect.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Preparation for the next patches.
Move the callsite of uprobe_copy_process() in copy_process() down
to the succesfull return. We do not care if copy_process() fails,
uprobe_free_utask() won't be called in this case so the wrong
->utask != NULL doesn't matter.
OTOH, with this change we know that copy_process() can't fail when
uprobe_copy_process() is called, the new task should either return
to user-mode or call do_exit(). This way uprobe_copy_process() can:
1. setup p->utask != NULL if necessary
2. setup uprobes_state.xol_area
3. use task_work_add(p)
Also, move the definition of uprobe_copy_process() down so that it
can see get_utask().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Currently we only optimize the context switch between two
contexts that have the same parent; this forgoes the
optimization between parent and child context, even though these
contexts could be equivalent too.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Shishkin, Alexander <alexander.shishkin@intel.com>
Link: http://lkml.kernel.org/r/20131007164257.GH3081@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Oleg complained about the excessive 0-ing in perf_event_mmap_event(),
so try and be smarter about it while keeping it fairly fool proof and
avoid leaking random bits out to userspace.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-8jirlm99m6if2z13wd6rbyu6@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf_event_mmap_event() does kzalloc(PATH_MAX + sizeof(u64)) to
ensure we can align the size later. However this means that we
actually allocate PAGE_SIZE * 2 buffer, seems too much.
Change this code to allocate PATH_MAX==PAGE_SIZE bytes, but tell
d_path() to not use the last sizeof(u64) bytes.
Note: it is not clear why do we need __GFP_ZERO, see the next patch.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131016201004.GC23214@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
1. perf_event_mmap(vma) is never called with a gate_vma-like arg,
remove the "if (!vma->vm_mm)" code.
2. arch_vma_name() can use the chached value of mmap_event->vma.
3. Change the code to not call arch_vma_name() twice.
4. Purely cosmetic, but since we use "goto got_name" all the time
remove "else" from "[stack]" branch just for symmetry.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131016200945.GB23214@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The PPC64 people noticed a missing memory barrier and crufty old
comments in the perf ring buffer code. So update all the comments and
add the missing barrier.
When the architecture implements local_t using atomic_long_t there
will be double barriers issued; but short of introducing more
conditional barrier primitives this is the best we can do.
Reported-by: Victor Kaplansky <victork@il.ibm.com>
Tested-by: Victor Kaplansky <victork@il.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: michael@ellerman.id.au
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: anton@samba.org
Cc: benh@kernel.crashing.org
Link: http://lkml.kernel.org/r/20131025173749.GG19466@laptop.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For now, we disable the extended MMAP record support (MMAP2).
We have identified cases where it would not report the correct mapping
information, clone(VM_CLONE) but with separate pids. We will revisit
the support once we find a solution for this case.
The patch changes the kernel to return EINVAL if attr->mmap2 is set. The
patch also modifies the perf tool to use regular PERF_RECORD_MMAP for
synthetic events and it also prevents the tool from requesting
attr->mmap2 mode because the kernel would reject it.
The support will be revisited once the kenrel interface is updated.
In V2, we reduce the patch to the strict minimum.
In V3, we avoid calling perf_event_open() with mmap2 set because we know
it will fail and require fallback retry.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131017173215.GA8820@quad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a generic qualifier for transaction events, as a new sample
type that returns a flag word. This is particularly useful
for qualifying aborts: to distinguish aborts which happen
due to asynchronous events (like conflicts caused by another
CPU) versus instructions that lead to an abort.
The tuning strategies are very different for those cases,
so it's important to distinguish them easily and early.
Since it's inconvenient and inflexible to filter for this
in the kernel we report all the events out and allow
some post processing in user space.
The flags are based on the Intel TSX events, but should be fairly
generic and mostly applicable to other HTM architectures too. In addition
to various flag words there's also reserved space to report an
program supplied abort code. For TSX this is used to distinguish specific
classes of aborts, like a lock busy abort when doing lock elision.
Flags:
Elision and generic transactions (ELISION vs TRANSACTION)
(HLE vs RTM on TSX; IBM etc. would likely only use TRANSACTION)
Aborts caused by current thread vs aborts caused by others (SYNC vs ASYNC)
Retryable transaction (RETRY)
Conflicts with other threads (CONFLICT)
Transaction write capacity overflow (CAPACITY WRITE)
Transaction read capacity overflow (CAPACITY READ)
Transactions implicitely aborted can also return an abort code.
This can be used to signal specific events to the profiler. A common
case is abort on lock busy in a RTM eliding library (code 0xff)
To handle this case we include the TSX abort code
Common example aborts in TSX would be:
- Data conflict with another thread on memory read.
Flags: TRANSACTION|ASYNC|CONFLICT
- executing a WRMSR in a transaction. Flags: TRANSACTION|SYNC
- HLE transaction in user space is too large
Flags: ELISION|SYNC|CAPACITY-WRITE
The only flag that is somewhat TSX specific is ELISION.
This adds the perf core glue needed for reporting the new flag word out.
v2: Add MEM/MISC
v3: Move transaction to the end
v4: Separate capacity-read/write and remove misc
v5: Remove _SAMPLE. Move abort flags to 32bit. Rename
transaction to txn
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379688044-14173-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
/proc/sys/kernel/perf_event_max_sample_rate will accept
negative values as well as 0.
Negative values are unreasonable, and 0 causes a
divide by zero exception in perf_proc_update_handler.
This patch enforces a lower limit of 1.
Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5242DB0C.4070005@t-online.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While auditing the list_entry usage due to a trinity bug I found that
perf_pmu_migrate_context violates the rules for
perf_event::event_entry.
The problem is that perf_event::event_entry is a RCU list element, and
hence we must wait for a full RCU grace period before re-using the
element after deletion.
Therefore the usage in perf_pmu_migrate_context() which re-uses the
entry immediately is broken. For now introduce another list_head into
perf_event for this specific usage.
This doesn't actually fix the trinity report because that never goes
through this code.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-mkj72lxagw1z8fvjm648iznw@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The dev_attrs field of struct bus_type is going away soon, dev_groups
should be used instead. This converts the pmu bus code to use
the correct field.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Solve the problems around the broken definition of perf_event_mmap_page::
cap_usr_time and cap_usr_rdpmc fields which used to overlap, partially
fixed by:
860f085b74 ("perf: Fix broken union in 'struct perf_event_mmap_page'")
The problem with the fix (merged in v3.12-rc1 and not yet released
officially), noticed by Vince Weaver is that the new behavior is
not detectable by new user-space, and that due to the reuse of the
field names it's easy to mis-compile a binary if old headers are used
on a new kernel or new headers are used on an old kernel.
To solve all that make this change explicit, detectable and self-contained,
by iterating the ABI the following way:
- Always clear bit 0, and rename it to usrpage->cap_bit0, to at least not
confuse old user-space binaries. RDPMC will be marked as unavailable
to old binaries but that's within the ABI, this is a capability bit.
- Rename bit 1 to ->cap_bit0_is_deprecated and always set it to 1, so new
libraries can reliably detect that bit 0 is deprecated and perma-zero
without having to check the kernel version.
- Use bits 2, 3, 4 for the newly defined, correct functionality:
cap_user_rdpmc : 1, /* The RDPMC instruction can be used to read counts */
cap_user_time : 1, /* The time_* fields are used */
cap_user_time_zero : 1, /* The time_zero field is used */
- Rename all the bitfield names in perf_event.h to be different from the
old names, to make sure it's not possible to mis-compile it
accidentally with old assumptions.
The 'size' field can then be used in the future to add new fields and it
will act as a natural ABI version indicator as well.
Also adjust tools/perf/ userspace for the new definitions, noticed by
Adrian Hunter.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Also-Fixed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/n/tip-zr03yxjrpXesOzzupszqglbv@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently utask->depth is simply the number of allocated/pending
return_instance's in uprobe_task->return_instances list.
handle_trampoline() should decrement this counter every time we
handle/free an instance, but due to typo it does this only if
->chained == T. This means that in the likely case this counter
is never decremented and the probed task can't report more than
MAX_URETPROBE_DEPTH events.
Reported-by: Mikhail Kulemin <Mikhail.Kulemin@ru.ibm.com>
Reported-by: Hemant Kumar Shaw <hkshaw@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Anton Arapov <anton@redhat.com>
Cc: masami.hiramatsu.pt@hitachi.com
Cc: srikar@linux.vnet.ibm.com
Cc: systemtap@sourceware.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20130911154726.GA8093@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf changes from Ingo Molnar:
"As a first remark I'd like to point out that the obsolete '-f'
(--force) option, which has not done anything for several releases,
has been removed from 'perf record' and related utilities. Everyone
please update muscle memory accordingly! :-)
Main changes on the perf kernel side:
- Performance optimizations:
. for trace events, by Steve Rostedt.
. for time values, by Peter Zijlstra
- New hardware support:
. for Intel Silvermont (22nm Atom) CPUs, by Zheng Yan
. for Intel SNB-EP uncore PMUs, by Zheng Yan
- Enhanced hardware support:
. for Intel uncore PMUs: add filter support for QPI boxes, by Zheng Yan
- Core perf events code enhancements and fixes:
. for full-nohz feature handling, by Frederic Weisbecker
. for group events, by Jiri Olsa
. for call chains, by Frederic Weisbecker
. for event stream parsing, by Adrian Hunter
- New ABI details:
. Add attr->mmap2 attribute, by Stephane Eranian
. Add PERF_EVENT_IOC_ID ioctl to return event ID, by Jiri Olsa
. Export u64 time_zero on the mmap header page to allow TSC
calculation, by Adrian Hunter
. Add dummy software event, by Adrian Hunter.
. Add a new PERF_SAMPLE_IDENTIFIER to make samples always
parseable, by Adrian Hunter.
. Make Power7 events available via sysfs, by Runzhen Wang.
- Code cleanups and refactorings:
. for nohz-full, by Frederic Weisbecker
. for group events, by Jiri Olsa
- Documentation updates:
. for perf_event_type, by Peter Zijlstra
Main changes on the perf tooling side (some of these tooling changes
utilize the above kernel side changes):
- Lots of 'perf trace' enhancements:
. Make 'perf trace' command line arguments consistent with
'perf record', by David Ahern.
. Allow specifying syscalls a la strace, by Arnaldo Carvalho de Melo.
. Add --verbose and -o/--output options, by Arnaldo Carvalho de Melo.
. Support ! in -e expressions, to filter a list of syscalls,
by Arnaldo Carvalho de Melo.
. Arg formatting improvements to allow masking arguments in
syscalls such as futex and open, where the some arguments are
ignored and thus should not be printed depending on other args,
by Arnaldo Carvalho de Melo.
. Beautify futex open, openat, open_by_handle_at, lseek and futex
syscalls, by Arnaldo Carvalho de Melo.
. Add option to analyze events in a file versus live, so that
one can do:
[root@zoo ~]# perf record -a -e raw_syscalls:* sleep 1
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 25.150 MB perf.data (~1098836 samples) ]
[root@zoo ~]# perf trace -i perf.data -e futex --duration 1
17.799 ( 1.020 ms): 7127 futex(uaddr: 0x7fff3f6c6674, op: 393, val: 1, utime: 0x7fff3f6c6470, ua
113.344 (95.429 ms): 7127 futex(uaddr: 0x7fff3f6c6674, op: 393, val: 1, utime: 0x7fff3f6c6470, uaddr2: 0x7fff3f6c6648, val3: 4294967
133.778 ( 1.042 ms): 18004 futex(uaddr: 0x7fff3f6c6674, op: 393, val: 1, utime: 0x7fff3f6c6470, uaddr2: 0x7fff3f6c6648, val3: 429496
[root@zoo ~]#
By David Ahern.
. Honor target pid / tid options when analyzing a file, by David Ahern.
. Introduce better formatting of syscall arguments, including so
far beautifiers for mmap, madvise, syscall return values,
by Arnaldo Carvalho de Melo.
. Handle HUGEPAGE defines in the mmap beautifier, by David Ahern.
- 'perf report/top' enhancements:
. Do annotation using /proc/kcore and /proc/kallsyms when
available, removing the forced need for a vmlinux file kernel
assembly annotation. This also improves this use case because
vmlinux has just the initial kernel image, not what is actually
in use after various code patchings by things like alternatives.
By Adrian Hunter.
. Add --ignore-callees=<regex> option to collapse undesired parts
of call graphs, by Greg Price.
. Simplify symbol filtering by doing it at machine class level,
by Adrian Hunter.
. Add support for callchains in the gtk UI, by Namhyung Kim.
. Add --objdump option to 'perf top', by Sukadev Bhattiprolu.
- 'perf kvm' enhancements:
. Add option to print only events that exceed a specified time
duration, by David Ahern.
. Improve stack trace printing, by David Ahern.
. Update documentation of the live command, by David Ahern
. Add perf kvm stat live mode that combines aspects of 'perf kvm
stat' record and report, by David Ahern.
. Add option to analyze specific VM in perf kvm stat report, by
David Ahern.
. Do not require /lib/modules/* on a guest, by Jason Wessel.
- 'perf script' enhancements:
. Fix symbol offset computation for some dsos, by David Ahern.
. Fix named threads support, by David Ahern.
. Don't install scripting files files when perl/python support
is disabled, by Arnaldo Carvalho de Melo.
- 'perf test' enhancements:
. Add various improvements and fixes to the "vmlinux matches
kallsyms" 'perf test' entry, related to the /proc/kcore
annotation feature. By Adrian Hunter.
. Add sample parsing test, by Adrian Hunter.
. Add test for reading object code, by Adrian Hunter.
. Add attr record group sampling test, by Jiri Olsa.
. Misc testing infrastructure improvements and other details,
by Jiri Olsa.
- 'perf list' enhancements:
. Skip unsupported hardware events, by Namhyung Kim.
. List pmu events, by Andi Kleen.
- 'perf diff' enhancements:
. Add support for more than two files comparison, by Jiri Olsa.
- 'perf sched' enhancements:
. Various improvements, including removing reliance on some
scheduler tracepoints that provide the same information as the
PERF_RECORD_{FORK,EXIT} events. By David Ahern.
. Remove odd build stall by moving a large struct initialization
from a local variable to a global one, by Namhyung Kim.
- 'perf stat' enhancements:
. Add --initial-delay option to skip measuring for a defined
startup phase, by Andi Kleen.
- Generic perf tooling infrastructure/plumbing changes:
. Tidy up sample parsing validation, by Adrian Hunter.
. Fix up jobserver setup in libtraceevent Makefile.
by Arnaldo Carvalho de Melo.
. Debug improvements, by Adrian Hunter.
. Fix correlation of samples coming after PERF_RECORD_EXIT event,
by David Ahern.
. Improve robustness of the topology parsing code,
by Stephane Eranian.
. Add group leader sampling, that allows just one event in a group
to sample while the other events have just its values read,
by Jiri Olsa.
. Add support for a new modifier "D", which requests that the
event, or group of events, be pinned to the PMU.
By Michael Ellerman.
. Support callchain sorting based on addresses, by Andi Kleen
. Prep work for multi perf data file storage, by Jiri Olsa.
. libtraceevent cleanups, by Namhyung Kim.
And lots and lots of other fixes and code reorganizations that did not
make it into the list, see the shortlog, diffstat and the Git log for
details!"
[ Also merge a leftover from the 3.11 cycle ]
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Prevent race in unthrottling code
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (237 commits)
perf trace: Tell arg formatters the arg index
perf trace: Add beautifier for open's flags arg
perf trace: Add beautifier for lseek's whence arg
perf tools: Fix symbol offset computation for some dsos
perf list: Skip unsupported events
perf tests: Add 'keep tracking' test
perf tools: Add support for PERF_COUNT_SW_DUMMY
perf: Add a dummy software event to keep tracking
perf trace: Add beautifier for futex 'operation' parm
perf trace: Allow syscall arg formatters to mask args
perf: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node()
perf: Export struct perf_branch_entry to userspace
perf: Add attr->mmap2 attribute to an event
perf/x86: Add Silvermont (22nm Atom) support
perf/x86: use INTEL_UEVENT_EXTRA_REG to define MSR_OFFCORE_RSP_X
perf trace: Handle missing HUGEPAGE defines
perf trace: Honor target pid / tid options when analyzing a file
perf trace: Add option to analyze events in a file versus live
perf evlist: Add tracepoint lookup by name
perf tests: Add a sample parsing test
...
Pull cgroup updates from Tejun Heo:
"A lot of activities on the cgroup front. Most changes aren't visible
to userland at all at this point and are laying foundation for the
planned unified hierarchy.
- The biggest change is decoupling the lifetime management of css
(cgroup_subsys_state) from that of cgroup's. Because controllers
(cpu, memory, block and so on) will need to be dynamically enabled
and disabled, css which is the association point between a cgroup
and a controller may come and go dynamically across the lifetime of
a cgroup. Till now, css's were created when the associated cgroup
was created and stayed till the cgroup got destroyed.
Assumptions around this tight coupling permeated through cgroup
core and controllers. These assumptions are gradually removed,
which consists bulk of patches, and css destruction path is
completely decoupled from cgroup destruction path. Note that
decoupling of creation path is relatively easy on top of these
changes and the patchset is pending for the next window.
- cgroup has its own event mechanism cgroup.event_control, which is
only used by memcg. It is overly complex trying to achieve high
flexibility whose benefits seem dubious at best. Going forward,
new events will simply generate file modified event and the
existing mechanism is being made specific to memcg. This pull
request contains prepatory patches for such change.
- Various fixes and cleanups"
Fixed up conflict in kernel/cgroup.c as per Tejun.
* 'for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (69 commits)
cgroup: fix cgroup_css() invocation in css_from_id()
cgroup: make cgroup_write_event_control() use css_from_dir() instead of __d_cgrp()
cgroup: make cgroup_event hold onto cgroup_subsys_state instead of cgroup
cgroup: implement CFTYPE_NO_PREFIX
cgroup: make cgroup_css() take cgroup_subsys * instead and allow NULL subsys
cgroup: rename cgroup_css_from_dir() to css_from_dir() and update its syntax
cgroup: fix cgroup_write_event_control()
cgroup: fix subsystem file accesses on the root cgroup
cgroup: change cgroup_from_id() to css_from_id()
cgroup: use css_get() in cgroup_create() to check CSS_ROOT
cpuset: remove an unncessary forward declaration
cgroup: RCU protect each cgroup_subsys_state release
cgroup: move subsys file removal to kill_css()
cgroup: factor out kill_css()
cgroup: decouple cgroup_subsys_state destruction from cgroup destruction
cgroup: replace cgroup->css_kill_cnt with ->nr_css
cgroup: bounce cgroup_subsys_state ref kill confirmation to a work item
cgroup: move cgroup->subsys[] assignment to online_css()
cgroup: reorganize css init / exit paths
cgroup: add __rcu modifier to cgroup->subsys[]
...
Adds a new PERF_RECORD_MMAP2 record type which is essence
an expanded version of PERF_RECORD_MMAP.
Used to request mmap records with more information about
the mapping, including device major, minor and the inode
number and generation for mappings associated with files
or shared memory segments. Works for code and data
(with attr->mmap_data set).
Existing PERF_RECORD_MMAP record is unmodified by this patch.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: http://lkml.kernel.org/r/1377079825-19057-2-git-send-email-eranian@google.com
[ Added Al to the Cc:. Are the ino, maj/min exports of vma->vm_file OK? ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current throttling code triggers WARN below via following
workload (only hit on AMD machine with 48 CPUs):
# while [ 1 ]; do perf record perf bench sched messaging; done
WARNING: at arch/x86/kernel/cpu/perf_event.c:1054 x86_pmu_start+0xc6/0x100()
SNIP
Call Trace:
<IRQ> [<ffffffff815f62d6>] dump_stack+0x19/0x1b
[<ffffffff8105f531>] warn_slowpath_common+0x61/0x80
[<ffffffff8105f60a>] warn_slowpath_null+0x1a/0x20
[<ffffffff810213a6>] x86_pmu_start+0xc6/0x100
[<ffffffff81129dd2>] perf_adjust_freq_unthr_context.part.75+0x182/0x1a0
[<ffffffff8112a058>] perf_event_task_tick+0xc8/0xf0
[<ffffffff81093221>] scheduler_tick+0xd1/0x140
[<ffffffff81070176>] update_process_times+0x66/0x80
[<ffffffff810b9565>] tick_sched_handle.isra.15+0x25/0x60
[<ffffffff810b95e1>] tick_sched_timer+0x41/0x60
[<ffffffff81087c24>] __run_hrtimer+0x74/0x1d0
[<ffffffff810b95a0>] ? tick_sched_handle.isra.15+0x60/0x60
[<ffffffff81088407>] hrtimer_interrupt+0xf7/0x240
[<ffffffff81606829>] smp_apic_timer_interrupt+0x69/0x9c
[<ffffffff8160569d>] apic_timer_interrupt+0x6d/0x80
<EOI> [<ffffffff81129f74>] ? __perf_event_task_sched_in+0x184/0x1a0
[<ffffffff814dd937>] ? kfree_skbmem+0x37/0x90
[<ffffffff815f2c47>] ? __slab_free+0x1ac/0x30f
[<ffffffff8118143d>] ? kfree+0xfd/0x130
[<ffffffff81181622>] kmem_cache_free+0x1b2/0x1d0
[<ffffffff814dd937>] kfree_skbmem+0x37/0x90
[<ffffffff814e03c4>] consume_skb+0x34/0x80
[<ffffffff8158b057>] unix_stream_recvmsg+0x4e7/0x820
[<ffffffff814d5546>] sock_aio_read.part.7+0x116/0x130
[<ffffffff8112c10c>] ? __perf_sw_event+0x19c/0x1e0
[<ffffffff814d5581>] sock_aio_read+0x21/0x30
[<ffffffff8119a5d0>] do_sync_read+0x80/0xb0
[<ffffffff8119ac85>] vfs_read+0x145/0x170
[<ffffffff8119b699>] SyS_read+0x49/0xa0
[<ffffffff810df516>] ? __audit_syscall_exit+0x1f6/0x2a0
[<ffffffff81604a19>] system_call_fastpath+0x16/0x1b
---[ end trace 622b7e226c4a766a ]---
The reason is a race in perf_event_task_tick() throttling code.
The race flow (simplified code):
- perf_throttled_count is per cpu variable and is
CPU throttling flag, here starting with 0
- perf_throttled_seq is sequence/domain for allowed
count of interrupts within the tick, gets increased
each tick
on single CPU (CPU bounded event):
... workload
perf_event_task_tick:
|
| T0 inc(perf_throttled_seq)
| T1 needs_unthr = xchg(perf_throttled_count, 0) == 0
tick gets interrupted:
... event gets throttled under new seq ...
T2 last NMI comes, event is throttled - inc(perf_throttled_count)
back to tick:
| perf_adjust_freq_unthr_context:
|
| T3 unthrottling is skiped for event (needs_unthr == 0)
| T4 event is stop and started via freq adjustment
|
tick ends
... workload
... no sample is hit for event ...
perf_event_task_tick:
|
| T5 needs_unthr = xchg(perf_throttled_count, 0) != 0 (from T2)
| T6 unthrottling is done on event (interrupts == MAX_INTERRUPTS)
| event is already started (from T4) -> WARN
Fixing this by not checking needs_unthr again and thus
check all events for unthrottling.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1377355554-8934-1-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The event stream is not always parsable because the format of a sample
is dependent on the sample_type of the selected event. When there is
more than one selected event and the sample_types are not the same then
parsing becomes problematic. A sample can be matched to its selected
event using the ID that is allocated when the event is opened.
Unfortunately, to get the ID from the sample means first parsing it.
This patch adds a new sample format bit PERF_SAMPLE_IDENTIFER that puts
the ID at a fixed position so that the ID can be retrieved without
parsing the sample. For sample events, that is the first position
immediately after the header. For non-sample events, that is the last
position.
In this respect parsing samples requires that the sample_type and ID
values are recorded. For example, perf tools records struct
perf_event_attr and the IDs within the perf.data file. Those must be
read first before it is possible to parse samples found later in the
perf.data file.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1377591794-30553-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cgroup_css_from_dir() will grow another user. In preparation, make
the following changes.
* All css functions are prefixed with just "css_", rename it to
css_from_dir().
* Take dentry * instead of file * as dentry is what ultimately
identifies a cgroup and file may not always be available. Note that
the function now checkes whether @dentry->d_inode is NULL as the
caller now may specify a negative dentry.
* Make it take cgroup_subsys * instead of integer subsys_id. This
simplifies the function and allows specifying no subsystem for
cgroup->dummy_css.
* Make return section a bit less verbose.
This patch doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Freq events may not always be affine to a particular CPU. As such,
account_event_cpu() may crash if we account per cpu a freq event
that has event->cpu == -1.
To solve this, lets account freq events globally. In practice
this doesn't change much the picture because perf tools create
per-task perf events with one event per CPU by default. Profiling a
single CPU is usually a corner case so there is no much point in
optimizing things that way.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1375460996-16329-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexander Shishkin