We only need a few dw here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VBIOS does this for us in asic_init.
v2: update iceland as well
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VBIOS does this for us in asic_init.
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Generally a good idea between VM sessions. We need a way to
detect VM pass-through in general and always run asic_init in
that case.
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Required to make desicions about certain code pathes.
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This table is found on boards that support SR-IOV. This will
be used to determine if the board supports SR-IOV and allow
the driver to take specific action in certain cases.
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_boot_test_post_card() is not used anywhere. Probably
a leftover from the original port from radeon.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ACP IP have internal DMA controller, DW I2S controller and DSPs
as separate power tiles. DMA and I2S devices are added to generic
pm domain, so that entire IP can be powered off/on at appropriate
times. Unused DSPs are made to be powered off though they are powered
on during ACP pm domain power on sequence.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds the ACP (Audio CoProcessor) IP driver and wires
it up to the amdgpu driver. The ACP block provides the DMA
engine for i2s based ALSA driver. This is required for audio
on APUs that utilize an i2s codec.
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Murali Krishna Vemuri <murali-krishna.vemuri@amd.com>
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That works with other values as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't calculate the end address multiple times.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Neither the global nor the local mutex exists any more and
amdgpu doesn't support cayman.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to fence every page table, just the page directory is enough.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we can't copy entries from the GTT or fill them with one command split
up the mapping operation into multiple ones.
v2: agd: rebase on upstream
v3: squash in Christian's fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That allows the VM code to use GART BOs from other driver instances.
v2: don't use copy optimization for foreign GARTs, that won't work.
v3: some more comment cleanups
v4: agd: rebase on upstream
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to duplicate that code over and over again. Also stop using the
flags to determine if we need to map the addresses.
v2: constify the pages_addr
v3: rebased, fix typo in commit message
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those are just leftovers from the time we wrote the VM
updates directly to the ring.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Crashing the system doesn't helps at all. Also properly return
-EINVAL if size or alignment are outside valid ranges.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since the dependency job is also scheduled by the same
scheduler with the job depended on it, no need to
call wake up scheduler when the dep is scheduled.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds the DCE8 enum header.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These add the interfaces for manual clock control.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These add the interfaces for manual clock control.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new sysfs interfaces:
pp_num_states: Read-only, return the number of all pp states, 0 if powerplay is not available.
pp_cur_state: Read-only, return the index number of current pp state.
pp_force_state: Read-write, to write a power state index will switch to selected state forcedly and
enable forced state mode, disable forced state mode. such as "echo >...".
pp_table: Read-write, binary output, to be used to read or write the dpm table, the maximum
file size is 4KB of page size.
pp_dpm_sclk: Read-write, reading will return a dpm levels list, to write an index number will force
powerplay to set the corresponding dpm level.
pp_dpm_mclk: same as sclk.
pp_dpm_pcie: same as sclk.
And add new setting "manual" to the existing interface power_dpm_force_performance_level.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the scheduler enabled we don't need that any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not needed any more because all access goes through the scheduler now.
v2: Update commit message.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the scheduler enabled managing per ring LRUs don't
make much sense any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need for an extra function any more.
v2: comment cleanups
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows the scheduler to handle the dependencies on ID contention as well.
v2: grab id only once
v3: use a separate lock for the VMIDs
v4: cleanup after semaphore removal
v5: minor coding style change
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because of the scheduler all traces come from the same thread now and
can't be distincted otherwise.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It doesn't currently do anything and there's no need for it
going forward since pci config reset will be required as a
fallback even when we have fine grained reset implemented.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ported from similar code in radeon.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Posting is required after a pci config reset.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop soft reset, always use pci config reset.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop soft reset, always use pci config reset.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more without semaphores
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed any more without semaphores.
v2: remove unused variables as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
No longer needed since semaphores were removed.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Non-scheduler code is longer supported.
v2: agd: rebased on upstream
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer needed now that semaphores are gone.
V2: remove the first amdgpu_sync_wait in amdgpu_ib_schedule
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> (V1)
Reviewed-by: Monk Liu <monk.liu@amd.com> (V2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer used.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The other ones don't have any VAs assigned anyway or are uninteresting to us.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make UVD/VCE VM emulation more efficient.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stop copying that to the bo list entry, it doesn't change anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move that into the BO list. No functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename it to amdgpu_cs_parser_bos and move validation and bo list init there.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unused user_ptr field, group fields by usage.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And also update the comment.
v2: agd: rebase on usptream.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to actually check the current placement. Just use the allowed domains
when the threshold is reached.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The threshold should only be computed once.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König