Robert reported that during boot the watchdog timestamp is set to 0 for one
second which is the indicator for a watchdog reset.
The reason for this is that the timestamp is in seconds and the time is
taken from sched clock and divided by ~1e9. sched clock starts at 0 which
means that for the first second during boot the watchdog timestamp is 0,
i.e. reset.
Use ULONG_MAX as the reset indicator value so the watchdog works correctly
right from the start. ULONG_MAX would only conflict with a real timestamp
if the system reaches an uptime of 136 years on 32bit and almost eternity
on 64bit.
Reported-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87o8v3uuzl.fsf@nanos.tec.linutronix.de
Arm64 has a more optimized spinning loop (atomic_cond_read_acquire)
using wfe for spinlock that can boost performance of sibling threads
by putting the current cpu to a wait state that is broken only when
the monitored variable changes or an external event happens.
OSQ has a more complicated spinning loop. Besides the lock value, it
also checks for need_resched() and vcpu_is_preempted(). The check for
need_resched() is not a problem as it is only set by the tick interrupt
handler. That will be detected by the spinning cpu right after iret.
The vcpu_is_preempted() check, however, is a problem as changes to the
preempt state of of previous node will not affect the wait state. For
ARM64, vcpu_is_preempted is not currently defined and so is a no-op.
Will has indicated that he is planning to para-virtualize wfe instead
of defining vcpu_is_preempted for PV support. So just add a comment in
arch/arm64/include/asm/spinlock.h to indicate that vcpu_is_preempted()
should not be defined as suggested.
On a 2-socket 56-core 224-thread ARM64 system, a kernel mutex locking
microbenchmark was run for 10s with and without the patch. The
performance numbers before patch were:
Running locktest with mutex [runtime = 10s, load = 1]
Threads = 224, Min/Mean/Max = 316/123,143/2,121,269
Threads = 224, Total Rate = 2,757 kop/s; Percpu Rate = 12 kop/s
After patch, the numbers were:
Running locktest with mutex [runtime = 10s, load = 1]
Threads = 224, Min/Mean/Max = 334/147,836/1,304,787
Threads = 224, Total Rate = 3,311 kop/s; Percpu Rate = 15 kop/s
So there was about 20% performance improvement.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200113150735.21956-1-longman@redhat.com
It was found that two lines in the output of /proc/lockdep_stats have
indentation problem:
# cat /proc/lockdep_stats
:
in-process chains: 25057
stack-trace entries: 137827 [max: 524288]
number of stack traces: 7973
number of stack hash chains: 6355
combined max dependencies: 1356414598
hardirq-safe locks: 57
hardirq-unsafe locks: 1286
:
All the numbers displayed in /proc/lockdep_stats except the two stack
trace numbers are formatted with a field with of 11. To properly align
all the numbers, a field width of 11 is now added to the two stack
trace numbers.
Fixes: 8c779229d0 ("locking/lockdep: Report more stack trace statistics")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lkml.kernel.org/r/20191211213139.29934-1-longman@redhat.com
The commit 91d2a812df ("locking/rwsem: Make handoff writer
optimistically spin on owner") will allow a recently woken up waiting
writer to spin on the owner. Unfortunately, if the owner happens to be
RWSEM_OWNER_UNKNOWN, the code will incorrectly spin on it leading to a
kernel crash. This is fixed by passing the proper non-spinnable bits
to rwsem_spin_on_owner() so that RWSEM_OWNER_UNKNOWN will be treated
as a non-spinnable target.
Fixes: 91d2a812df ("locking/rwsem: Make handoff writer optimistically spin on owner")
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200115154336.8679-1-longman@redhat.com
topology.c::get_group() relies on the assumption that non-NUMA domains do
not partially overlap. Zeng Tao pointed out in [1] that such topology
descriptions, while completely bogus, can end up being exposed to the
scheduler.
In his example (8 CPUs, 2-node system), we end up with:
MC span for CPU3 == 3-7
MC span for CPU4 == 4-7
The first pass through get_group(3, sdd@MC) will result in the following
sched_group list:
3 -> 4 -> 5 -> 6 -> 7
^ /
`----------------'
And a later pass through get_group(4, sdd@MC) will "corrupt" that to:
3 -> 4 -> 5 -> 6 -> 7
^ /
`-----------'
which will completely break things like 'while (sg != sd->groups)' when
using CPU3's base sched_domain.
There already are some architecture-specific checks in place such as
x86/kernel/smpboot.c::topology.sane(), but this is something we can detect
in the core scheduler, so it seems worthwhile to do so.
Warn and abort the construction of the sched domains if such a broken
topology description is detected. Note that this is somewhat
expensive (O(t.c²), 't' non-NUMA topology levels and 'c' CPUs) and could be
gated under SCHED_DEBUG if deemed necessary.
Testing
=======
Dietmar managed to reproduce this using the following qemu incantation:
$ qemu-system-aarch64 -kernel ./Image -hda ./qemu-image-aarch64.img \
-append 'root=/dev/vda console=ttyAMA0 loglevel=8 sched_debug' -smp \
cores=8 --nographic -m 512 -cpu cortex-a53 -machine virt -numa \
node,cpus=0-2,nodeid=0 -numa node,cpus=3-7,nodeid=1
alongside the following drivers/base/arch_topology.c hack (AIUI wouldn't be
needed if '-smp cores=X, sockets=Y' would work with qemu):
8<---
@@ -465,6 +465,9 @@ void update_siblings_masks(unsigned int cpuid)
if (cpuid_topo->package_id != cpu_topo->package_id)
continue;
+ if ((cpu < 4 && cpuid > 3) || (cpu > 3 && cpuid < 4))
+ continue;
+
cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
cpumask_set_cpu(cpu, &cpuid_topo->core_sibling);
8<---
[1]: https://lkml.kernel.org/r/1577088979-8545-1-git-send-email-prime.zeng@hisilicon.com
Reported-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200115160915.22575-1-valentin.schneider@arm.com
There is a spelling misake in comments of cpuidle_idle_call. Fix it.
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20200110025604.34373-1-hewenliang4@huawei.com
With commit
bef69dd878 ("sched/cpufreq: Move the cfs_rq_util_change() call to cpufreq_update_util()")
update_load_avg() has become the central point for calling cpufreq
(not including the update of blocked load). This change helps to
simplify further the number of calls to cpufreq_update_util() and to
remove last redundant ones. With update_load_avg(), we are now sure
that cpufreq_update_util() will be called after every task attachment
to a cfs_rq and especially after propagating this event down to the
util_avg of the root cfs_rq, which is the level that is used by
cpufreq governors like schedutil to set the frequency of a CPU.
The SCHED_CPUFREQ_MIGRATION flag forces an early call to cpufreq when
the migration happens in a cgroup whereas util_avg of root cfs_rq is
not yet updated and this call is duplicated with the one that happens
immediately after when the migration event reaches the root cfs_rq.
The dedicated flag SCHED_CPUFREQ_MIGRATION is now useless and can be
removed. The interface of attach_entity_load_avg() can also be
simplified accordingly.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/1579083620-24943-1-git-send-email-vincent.guittot@linaro.org
when CONFIG_PSI_DEFAULT_DISABLED set to N or the command line set psi=0,
I think we should not create /proc/pressure and
/proc/pressure/{io|memory|cpu}.
In the future, user maybe determine whether the psi feature is enabled by
checking the existence of the /proc/pressure dir or
/proc/pressure/{io|memory|cpu} files.
Signed-off-by: Wang Long <w@laoqinren.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/1576672698-32504-1-git-send-email-w@laoqinren.net
commit bf475ce0a3 ("sched/fair: Add per-CPU min capacity to
sched_group_capacity") introduced per-cpu min_capacity.
commit e3d6d0cb66 ("sched/fair: Add sched_group per-CPU max capacity")
introduced per-cpu max_capacity.
In the SD_OVERLAP case, the local variable 'capacity' represents the sum
of CPU capacity of all CPUs in the first sched group (sg) of the sched
domain (sd).
It is erroneously used to calculate sg's min and max CPU capacity.
To fix this use capacity_of(cpu) instead of 'capacity'.
The code which achieves this via cpu_rq(cpu)->sd->groups->sgc->capacity
(for rq->sd != NULL) can be removed since it delivers the same value as
capacity_of(cpu) which is currently only used for the (!rq->sd) case
(see update_cpu_capacity()).
An sg of the lowest sd (rq->sd or sd->child == NULL) represents a single
CPU (and hence sg->sgc->capacity == capacity_of(cpu)).
Signed-off-by: Peng Liu <iwtbavbm@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20200104130828.GA7718@iZj6chx1xj0e0buvshuecpZ
Move the code of calculation for delta_sum/delta_avg to where
it is really needed to be done.
Signed-off-by: Peng Wang <rocking@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200103114400.17668-1-rocking@linux.alibaba.com
Every time we call irqtime_account_process_tick() is in a interrupt,
Every caller will get and assign a parameter rq = this_rq(), This is
unnecessary and increase the code size a little bit. Move the rq getting
action to irqtime_account_process_tick internally is better.
base with this patch
cputime.o 578792 bytes 577888 bytes
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1577959674-255537-1-git-send-email-alex.shi@linux.alibaba.com
The function stop_cpus() is only used internally by the
stop_machine for stop multiple cpus.
Make it static.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191228161912.24082-1-tiny.windzz@gmail.com
Lengthy output of sysrq-t may take a lot of time on slow serial console
with lots of processes and CPUs.
So we need to reset NMI-watchdog to avoid spurious lockup messages, and
we also reset softlockup watchdogs on all other CPUs since another CPU
might be blocked waiting for us to process an IPI or stop_machine.
Add to sysrq_sched_debug_show() as what we did in show_state_filter().
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20191226085224.48942-1-liwei391@huawei.com
rq::uclamp is an array of struct uclamp_rq, make sure we clear the
whole thing.
Fixes: 69842cba9a ("sched/uclamp: Add CPU's clamp buckets refcountinga")
Signed-off-by: Li Guanglei <guanglei.li@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Link: https://lkml.kernel.org/r/1577259844-12677-1-git-send-email-guangleix.li@gmail.com
When a new cgroup is created, the effective uclamp value wasn't updated
with a call to cpu_util_update_eff() that looks at the hierarchy and
update to the most restrictive values.
Fix it by ensuring to call cpu_util_update_eff() when a new cgroup
becomes online.
Without this change, the newly created cgroup uses the default
root_task_group uclamp values, which is 1024 for both uclamp_{min, max},
which will cause the rq to to be clamped to max, hence cause the
system to run at max frequency.
The problem was observed on Ubuntu server and was reproduced on Debian
and Buildroot rootfs.
By default, Ubuntu and Debian create a cpu controller cgroup hierarchy
and add all tasks to it - which creates enough noise to keep the rq
uclamp value at max most of the time. Imitating this behavior makes the
problem visible in Buildroot too which otherwise looks fine since it's a
minimal userspace.
Fixes: 0b60ba2dd3 ("sched/uclamp: Propagate parent clamps")
Reported-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Doug Smythies <dsmythies@telus.net>
Link: https://lore.kernel.org/lkml/000701d5b965$361b6c60$a2524520$@net/
The fair scheduler performs periodic load balance on every CPU to check
if it can pull some tasks from other busy CPUs. The duration of this
periodic load balance is set to sd->balance_interval for the idle CPUs
and is calculated by multiplying the sd->balance_interval with the
sd->busy_factor (set to 32 by default) for the busy CPUs. The
multiplication is done for busy CPUs to avoid doing load balance too
often and rather spend more time executing actual task. While that is
the right thing to do for the CPUs busy with SCHED_OTHER or SCHED_BATCH
tasks, it may not be the optimal thing for CPUs running only SCHED_IDLE
tasks.
With the recent enhancements in the fair scheduler around SCHED_IDLE
CPUs, we now prefer to enqueue a newly-woken task to a SCHED_IDLE
CPU instead of other busy or idle CPUs. The same reasoning should be
applied to the load balancer as well to make it migrate tasks more
aggressively to a SCHED_IDLE CPU, as that will reduce the scheduling
latency of the migrated (SCHED_OTHER) tasks.
This patch makes minimal changes to the fair scheduler to do the next
load balance soon after the last non SCHED_IDLE task is dequeued from a
runqueue, i.e. making the CPU SCHED_IDLE. Also the sd->busy_factor is
ignored while calculating the balance_interval for such CPUs. This is
done to avoid delaying the periodic load balance by few hundred
milliseconds for SCHED_IDLE CPUs.
This is tested on ARM64 Hikey620 platform (octa-core) with the help of
rt-app and it is verified, using kernel traces, that the newly
SCHED_IDLE CPU does load balancing shortly after it becomes SCHED_IDLE
and pulls tasks from other busy CPUs.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/e485827eb8fe7db0943d6f3f6e0f5a4a70272781.1578471925.git.viresh.kumar@linaro.org
Similarly to calculate_imbalance() and find_busiest_group(), using the
number of idle CPUs when there is only 1 CPU in the group is not efficient
because we can't make a difference between a CPU running 1 task and a CPU
running dozens of small tasks competing for the same CPU but not enough
to overload it. More generally speaking, we should use the number of
running tasks when there is the same number of idle CPUs in a group instead
of blindly select the 1st one.
When the groups have spare capacity and the same number of idle CPUs, we
compare the number of running tasks to select the busiest group.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1576839893-26930-1-git-send-email-vincent.guittot@linaro.org
After commit 9cf57731b6 ("watchdog/softlockup: Replace "watchdog/%u"
threads with cpu_stop_work"), the percpu soft_lockup_hrtimer_cnt is
not used any more, so remove it and related code.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191218131720.4146aea2@xhacker.debian
If syscall_enter_define_fields() is called on a system call with no
arguments, the return code variable "ret" will never get initialized.
Initialize it to zero.
Fixes: 04ae87a520 ("ftrace: Rework event_create_dir()")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/0FA8C6E3-D9F5-416D-A1B0-5E4CD583A101@lca.pw
kernel/bpf/syscall.c: In function generic_map_lookup_batch:
kernel/bpf/syscall.c:1339:7: warning: variable first_key set but not used [-Wunused-but-set-variable]
It is never used, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Brian Vazquez <brianvv@google.com>
Link: https://lore.kernel.org/bpf/20200116145300.59056-1-yuehaibing@huawei.com
Now that we don't have a reference to a devmap when flushing the device
bulk queue, let's change the the devmap_xmit tracepoint to remote the
map_id and map_index fields entirely. Rearrange the fields so 'drops' and
'sent' stay in the same position in the tracepoint struct, to make it
possible for the xdp_monitor utility to read both the old and the new
format.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/157918768613.1458396.9165902403373826572.stgit@toke.dk
Since the bulk queue used by XDP_REDIRECT now lives in struct net_device,
we can re-use the bulking for the non-map version of the bpf_redirect()
helper. This is a simple matter of having xdp_do_redirect_slow() queue the
frame on the bulk queue instead of sending it out with __bpf_tx_xdp().
Unfortunately we can't make the bpf_redirect() helper return an error if
the ifindex doesn't exit (as bpf_redirect_map() does), because we don't
have a reference to the network namespace of the ingress device at the time
the helper is called. So we have to leave it as-is and keep the device
lookup in xdp_do_redirect_slow().
Since this leaves less reason to have the non-map redirect code in a
separate function, so we get rid of the xdp_do_redirect_slow() function
entirely. This does lose us the tracepoint disambiguation, but fortunately
the xdp_redirect and xdp_redirect_map tracepoints use the same tracepoint
entry structures. This means both can contain a map index, so we can just
amend the tracepoint definitions so we always emit the xdp_redirect(_err)
tracepoints, but with the map ID only populated if a map is present. This
means we retire the xdp_redirect_map(_err) tracepoints entirely, but keep
the definitions around in case someone is still listening for them.
With this change, the performance of the xdp_redirect sample program goes
from 5Mpps to 8.4Mpps (a 68% increase).
Since the flush functions are no longer map-specific, rename the flush()
functions to drop _map from their names. One of the renamed functions is
the xdp_do_flush_map() callback used in all the xdp-enabled drivers. To
keep from having to update all drivers, use a #define to keep the old name
working, and only update the virtual drivers in this patch.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/157918768505.1458396.17518057312953572912.stgit@toke.dk
Commit 96360004b8 ("xdp: Make devmap flush_list common for all map
instances"), changed devmap flushing to be a global operation instead of a
per-map operation. However, the queue structure used for bulking was still
allocated as part of the containing map.
This patch moves the devmap bulk queue into struct net_device. The
motivation for this is reusing it for the non-map variant of XDP_REDIRECT,
which will be changed in a subsequent commit. To avoid other fields of
struct net_device moving to different cache lines, we also move a couple of
other members around.
We defer the actual allocation of the bulk queue structure until the
NETDEV_REGISTER notification devmap.c. This makes it possible to check for
ndo_xdp_xmit support before allocating the structure, which is not possible
at the time struct net_device is allocated. However, we keep the freeing in
free_netdev() to avoid adding another RCU callback on NETDEV_UNREGISTER.
Because of this change, we lose the reference back to the map that
originated the redirect, so change the tracepoint to always return 0 as the
map ID and index. Otherwise no functional change is intended with this
patch.
After this patch, the relevant part of struct net_device looks like this,
according to pahole:
/* --- cacheline 14 boundary (896 bytes) --- */
struct netdev_queue * _tx __attribute__((__aligned__(64))); /* 896 8 */
unsigned int num_tx_queues; /* 904 4 */
unsigned int real_num_tx_queues; /* 908 4 */
struct Qdisc * qdisc; /* 912 8 */
unsigned int tx_queue_len; /* 920 4 */
spinlock_t tx_global_lock; /* 924 4 */
struct xdp_dev_bulk_queue * xdp_bulkq; /* 928 8 */
struct xps_dev_maps * xps_cpus_map; /* 936 8 */
struct xps_dev_maps * xps_rxqs_map; /* 944 8 */
struct mini_Qdisc * miniq_egress; /* 952 8 */
/* --- cacheline 15 boundary (960 bytes) --- */
struct hlist_head qdisc_hash[16]; /* 960 128 */
/* --- cacheline 17 boundary (1088 bytes) --- */
struct timer_list watchdog_timer; /* 1088 40 */
/* XXX last struct has 4 bytes of padding */
int watchdog_timeo; /* 1128 4 */
/* XXX 4 bytes hole, try to pack */
struct list_head todo_list; /* 1136 16 */
/* --- cacheline 18 boundary (1152 bytes) --- */
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/157918768397.1458396.12673224324627072349.stgit@toke.dk
Upon resuming from hibernation, free pages may contain stale data from
the kernel that initiated the resume. This breaks the invariant
inflicted by init_on_free=1 that freed pages must be zeroed.
To deal with this problem, make clear_free_pages() also clear the free
pages when init_on_free is enabled.
Fixes: 6471384af2 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Reported-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The sysfs attribute `/sys/power/sync_on_suspend` controls, whether or not
filesystems are synced by the kernel before system suspend.
Congruously, the behaviour of build-time switch CONFIG_SUSPEND_SKIP_SYNC
is slightly changed: It now defines the run-tim default for the new sysfs
attribute `/sys/power/sync_on_suspend`.
The run-time attribute is added because the existing corresponding
build-time Kconfig flag for (`CONFIG_SUSPEND_SKIP_SYNC`) is not flexible
enough. E.g. Linux distributions that provide pre-compiled kernels
usually want to stick with the default (sync filesystems before suspend)
but under special conditions this needs to be changed.
One example for such a special condition is user-space handling of
suspending block devices (e.g. using `cryptsetup luksSuspend` or `dmsetup
suspend`) before system suspend. The Kernel trying to sync filesystems
after the underlying block device already got suspended obviously leads
to dead-locks. Be aware that you have to take care of the filesystem sync
yourself before suspending the system in those scenarios.
Signed-off-by: Jonas Meurer <jonas@freesources.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit 9cf57731b6 ("watchdog/softlockup: Replace "watchdog/%u" threads
with cpu_stop_work") ensures that the watchdog is reliably touched during
a task switch.
As a result the check for an unnoticed task switch is not longer needed.
Remove the relevant code, which effectively reverts commit b1a8de1f53
("softlockup: make detector be aware of task switch of processes hogging
cpu")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Ziljstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20191024114928.15377-2-pmladek@suse.com
trace_printk() is used to debug the kernel which includes the tracing
infrastructure. But because it writes to the ring buffer, and so does much
of the tracing infrastructure, the ring buffer's recursive detection will
drop writes to the ring buffer that is in the same context as the current
write is happening (it allows interrupts to write when normal context is
writing, but wont let normal context write while normal context is writing).
This can cause confusion and think that the code is where the trace_printk()
exists is not hit. To solve this, up the recursive nesting of the ring
buffer when trace_printk() is called before it writes to the buffer itself.
Note, this does make it dangerous to use trace_printk() in the ring buffer
code itself, because this basically disables the recursion protection of
trace_printk() buffer writes. But as trace_printk() is only used for
debugging, and if this does occur, the developer will see the cause real
quick (recursive blowing up of the stack). Thus the developer can deal with
that. But having trace_printk() silently ignored is a much bigger problem,
and disabling recursive protection is a small price to pay to fix it.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
After commit 9cf57731b6 ("watchdog/softlockup: Replace "watchdog/%u"
threads with cpu_stop_work"), the percpu soft_lockup_hrtimer_cnt is
not used any more, so remove it and related code.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191218131720.4146aea2@xhacker.debian
Daniel Borkmann says:
====================
pull-request: bpf 2020-01-15
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 9 day(s) which contain
a total of 13 files changed, 95 insertions(+), 43 deletions(-).
The main changes are:
1) Fix refcount leak for TCP time wait and request sockets for socket lookup
related BPF helpers, from Lorenz Bauer.
2) Fix wrong verification of ARSH instruction under ALU32, from Daniel Borkmann.
3) Batch of several sockmap and related TLS fixes found while operating
more complex BPF programs with Cilium and OpenSSL, from John Fastabend.
4) Fix sockmap to read psock's ingress_msg queue before regular sk_receive_queue()
to avoid purging data upon teardown, from Lingpeng Chen.
5) Fix printing incorrect pointer in bpftool's btf_dump_ptr() in order to properly
dump a BPF map's value with BTF, from Martin KaFai Lau.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
htab can't use generic batch support due some problematic behaviours
inherent to the data structre, i.e. while iterating the bpf map a
concurrent program might delete the next entry that batch was about to
use, in that case there's no easy solution to retrieve the next entry,
the issue has been discussed multiple times (see [1] and [2]).
The only way hmap can be traversed without the problem previously
exposed is by making sure that the map is traversing entire buckets.
This commit implements those strict requirements for hmap, the
implementation follows the same interaction that generic support with
some exceptions:
- If keys/values buffer are not big enough to traverse a bucket,
ENOSPC will be returned.
- out_batch contains the value of the next bucket in the iteration, not
the next key, but this is transparent for the user since the user
should never use out_batch for other than bpf batch syscalls.
This commits implements BPF_MAP_LOOKUP_BATCH and adds support for new
command BPF_MAP_LOOKUP_AND_DELETE_BATCH. Note that for update/delete
batch ops it is possible to use the generic implementations.
[1] https://lore.kernel.org/bpf/20190724165803.87470-1-brianvv@google.com/
[2] https://lore.kernel.org/bpf/20190906225434.3635421-1-yhs@fb.com/
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115184308.162644-6-brianvv@google.com
This adds the generic batch ops functionality to bpf arraymap, note that
since deletion is not a valid operation for arraymap, only batch and
lookup are added.
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200115184308.162644-5-brianvv@google.com
This commit adds generic support for update and delete batch ops that
can be used for almost all the bpf maps. These commands share the same
UAPI attr that lookup and lookup_and_delete batch ops use and the
syscall commands are:
BPF_MAP_UPDATE_BATCH
BPF_MAP_DELETE_BATCH
The main difference between update/delete and lookup batch ops is that
for update/delete keys/values must be specified for userspace and
because of that, neither in_batch nor out_batch are used.
Suggested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115184308.162644-4-brianvv@google.com
This commit introduces generic support for the bpf_map_lookup_batch.
This implementation can be used by almost all the bpf maps since its core
implementation is relying on the existing map_get_next_key and
map_lookup_elem. The bpf syscall subcommand introduced is:
BPF_MAP_LOOKUP_BATCH
The UAPI attribute is:
struct { /* struct used by BPF_MAP_*_BATCH commands */
__aligned_u64 in_batch; /* start batch,
* NULL to start from beginning
*/
__aligned_u64 out_batch; /* output: next start batch */
__aligned_u64 keys;
__aligned_u64 values;
__u32 count; /* input/output:
* input: # of key/value
* elements
* output: # of filled elements
*/
__u32 map_fd;
__u64 elem_flags;
__u64 flags;
} batch;
in_batch/out_batch are opaque values use to communicate between
user/kernel space, in_batch/out_batch must be of key_size length.
To start iterating from the beginning in_batch must be null,
count is the # of key/value elements to retrieve. Note that the 'keys'
buffer must be a buffer of key_size * count size and the 'values' buffer
must be value_size * count, where value_size must be aligned to 8 bytes
by userspace if it's dealing with percpu maps. 'count' will contain the
number of keys/values successfully retrieved. Note that 'count' is an
input/output variable and it can contain a lower value after a call.
If there's no more entries to retrieve, ENOENT will be returned. If error
is ENOENT, count might be > 0 in case it copied some values but there were
no more entries to retrieve.
Note that if the return code is an error and not -EFAULT,
count indicates the number of elements successfully processed.
Suggested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115184308.162644-3-brianvv@google.com
This commit moves reusable code from map_lookup_elem and map_update_elem
to avoid code duplication in kernel/bpf/syscall.c.
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200115184308.162644-2-brianvv@google.com
Anatoly has been fuzzing with kBdysch harness and reported a hang in one
of the outcomes:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (85) call bpf_get_socket_cookie#46
1: R0_w=invP(id=0) R10=fp0
1: (57) r0 &= 808464432
2: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0
2: (14) w0 -= 810299440
3: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0
3: (c4) w0 s>>= 1
4: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0
4: (76) if w0 s>= 0x30303030 goto pc+216
221: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0
221: (95) exit
processed 6 insns (limit 1000000) [...]
Taking a closer look, the program was xlated as follows:
# ./bpftool p d x i 12
0: (85) call bpf_get_socket_cookie#7800896
1: (bf) r6 = r0
2: (57) r6 &= 808464432
3: (14) w6 -= 810299440
4: (c4) w6 s>>= 1
5: (76) if w6 s>= 0x30303030 goto pc+216
6: (05) goto pc-1
7: (05) goto pc-1
8: (05) goto pc-1
[...]
220: (05) goto pc-1
221: (05) goto pc-1
222: (95) exit
Meaning, the visible effect is very similar to f54c7898ed ("bpf: Fix
precision tracking for unbounded scalars"), that is, the fall-through
branch in the instruction 5 is considered to be never taken given the
conclusion from the min/max bounds tracking in w6, and therefore the
dead-code sanitation rewrites it as goto pc-1. However, real-life input
disagrees with verification analysis since a soft-lockup was observed.
The bug sits in the analysis of the ARSH. The definition is that we shift
the target register value right by K bits through shifting in copies of
its sign bit. In adjust_scalar_min_max_vals(), we do first coerce the
register into 32 bit mode, same happens after simulating the operation.
However, for the case of simulating the actual ARSH, we don't take the
mode into account and act as if it's always 64 bit, but location of sign
bit is different:
dst_reg->smin_value >>= umin_val;
dst_reg->smax_value >>= umin_val;
dst_reg->var_off = tnum_arshift(dst_reg->var_off, umin_val);
Consider an unknown R0 where bpf_get_socket_cookie() (or others) would
for example return 0xffff. With the above ARSH simulation, we'd see the
following results:
[...]
1: R1=ctx(id=0,off=0,imm=0) R2_w=invP65535 R10=fp0
1: (85) call bpf_get_socket_cookie#46
2: R0_w=invP(id=0) R10=fp0
2: (57) r0 &= 808464432
-> R0_runtime = 0x3030
3: R0_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0
3: (14) w0 -= 810299440
-> R0_runtime = 0xcfb40000
4: R0_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0
(0xffffffff)
4: (c4) w0 s>>= 1
-> R0_runtime = 0xe7da0000
5: R0_w=invP(id=0,umin_value=1740636160,umax_value=2147221496,var_off=(0x67c00000; 0x183bfff8)) R10=fp0
(0x67c00000) (0x7ffbfff8)
[...]
In insn 3, we have a runtime value of 0xcfb40000, which is '1100 1111 1011
0100 0000 0000 0000 0000', the result after the shift has 0xe7da0000 that
is '1110 0111 1101 1010 0000 0000 0000 0000', where the sign bit is correctly
retained in 32 bit mode. In insn4, the umax was 0xffffffff, and changed into
0x7ffbfff8 after the shift, that is, '0111 1111 1111 1011 1111 1111 1111 1000'
and means here that the simulation didn't retain the sign bit. With above
logic, the updates happen on the 64 bit min/max bounds and given we coerced
the register, the sign bits of the bounds are cleared as well, meaning, we
need to force the simulation into s32 space for 32 bit alu mode.
Verification after the fix below. We're first analyzing the fall-through branch
on 32 bit signed >= test eventually leading to rejection of the program in this
specific case:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r2 = 808464432
1: R1=ctx(id=0,off=0,imm=0) R2_w=invP808464432 R10=fp0
1: (85) call bpf_get_socket_cookie#46
2: R0_w=invP(id=0) R10=fp0
2: (bf) r6 = r0
3: R0_w=invP(id=0) R6_w=invP(id=0) R10=fp0
3: (57) r6 &= 808464432
4: R0_w=invP(id=0) R6_w=invP(id=0,umax_value=808464432,var_off=(0x0; 0x30303030)) R10=fp0
4: (14) w6 -= 810299440
5: R0_w=invP(id=0) R6_w=invP(id=0,umax_value=4294967295,var_off=(0xcf800000; 0x3077fff0)) R10=fp0
5: (c4) w6 s>>= 1
6: R0_w=invP(id=0) R6_w=invP(id=0,umin_value=3888119808,umax_value=4294705144,var_off=(0xe7c00000; 0x183bfff8)) R10=fp0
(0x67c00000) (0xfffbfff8)
6: (76) if w6 s>= 0x30303030 goto pc+216
7: R0_w=invP(id=0) R6_w=invP(id=0,umin_value=3888119808,umax_value=4294705144,var_off=(0xe7c00000; 0x183bfff8)) R10=fp0
7: (30) r0 = *(u8 *)skb[808464432]
BPF_LD_[ABS|IND] uses reserved fields
processed 8 insns (limit 1000000) [...]
Fixes: 9cbe1f5a32 ("bpf/verifier: improve register value range tracking with ARSH")
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115204733.16648-1-daniel@iogearbox.net
Suspend to IDLE invokes tick_unfreeze() on resume. tick_unfreeze() on the
first resuming CPU resumes timekeeping, which also has the side effect of
resetting the softlockup watchdog on this CPU.
But on the secondary CPUs the watchdog is not reset in the resume /
unfreeze() path, which can result in false softlockup warnings on those
CPUs depending on the time spent in suspend.
Prevent this by clearing the softlock watchdog in the unfreeze path also
on the secondary resuming CPUs.
[ tglx: Massaged changelog ]
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200110083902.27276-1-chunyan.zhang@unisoc.com
Commit 8b401f9ed2 ("bpf: implement bpf_send_signal() helper")
added helper bpf_send_signal() which permits bpf program to
send a signal to the current process. The signal may be
delivered to any threads in the process.
We found a use case where sending the signal to the current
thread is more preferable.
- A bpf program will collect the stack trace and then
send signal to the user application.
- The user application will add some thread specific
information to the just collected stack trace for
later analysis.
If bpf_send_signal() is used, user application will need
to check whether the thread receiving the signal matches
the thread collecting the stack by checking thread id.
If not, it will need to send signal to another thread
through pthread_kill().
This patch proposed a new helper bpf_send_signal_thread(),
which sends the signal to the thread corresponding to
the current kernel task. This way, user space is guaranteed that
bpf_program execution context and user space signal handling
context are the same thread.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115035002.602336-1-yhs@fb.com
The test_cgcore_no_internal_process_constraint_on_threads selftest when
running with subsystem controlling noise triggers two warnings:
> [ 597.443115] WARNING: CPU: 1 PID: 28167 at kernel/cgroup/cgroup.c:3131 cgroup_apply_control_enable+0xe0/0x3f0
> [ 597.443413] WARNING: CPU: 1 PID: 28167 at kernel/cgroup/cgroup.c:3177 cgroup_apply_control_disable+0xa6/0x160
Both stem from a call to cgroup_type_write. The first warning was also
triggered by syzkaller.
When we're switching cgroup to threaded mode shortly after a subsystem
was disabled on it, we can see the respective subsystem css dying there.
The warning in cgroup_apply_control_enable is harmless in this case
since we're not adding new subsys anyway.
The warning in cgroup_apply_control_disable indicates an attempt to kill
css of recently disabled subsystem repeatedly.
The commit prevents these situations by making cgroup_type_write wait
for all dying csses to go away before re-applying subtree controls.
When at it, the locations of WARN_ON_ONCE calls are moved so that
warning is triggered only when we are about to misuse the dying css.
Reported-by: syzbot+5493b2a54d31d6aea629@syzkaller.appspotmail.com
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
It's surprising that workqueue_execute_end includes only the work when
its counterpart workqueue_execute_start has both the work and the worker
function.
You can't set a tracing filter or trigger based on the function, and
postprocessing scripts interested in specific functions are harder to
write since they have to remember the work from _start and match it up
with the same field in _end.
Add the function name, taking care to use the copy stashed in the
worker since the work is no longer safe to touch.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Function name cgroup_rstat_cpu_pop_upated() in comment should be
cgroup_rstat_cpu_pop_updated().
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
It is useful to know which module failed signature verification, so
print the module name along with the error message.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The alarmtimer_rtc_add_device() function creates a wakeup source and then
tries to grab a module reference. If that fails the function returns early
with an error code, but fails to remove the wakeup source.
Cleanup this exit path so there is no dangling wakeup source, which is
named 'alarmtime' left allocated which will conflict with another RTC
device that may be registered later.
Fixes: 51218298a2 ("alarmtimer: Ensure RTC module is not unloaded")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200109155910.907-2-swboyd@chromium.org
With CONFIG_PROVE_RCU_LIST, I had many suspicious RCU warnings
when I ran ftracetest trigger testcases.
-----
# dmesg -c > /dev/null
# ./ftracetest test.d/trigger
...
# dmesg | grep "RCU-list traversed" | cut -f 2 -d ] | cut -f 2 -d " "
kernel/trace/trace_events_hist.c:6070
kernel/trace/trace_events_hist.c:1760
kernel/trace/trace_events_hist.c:5911
kernel/trace/trace_events_trigger.c:504
kernel/trace/trace_events_hist.c:1810
kernel/trace/trace_events_hist.c:3158
kernel/trace/trace_events_hist.c:3105
kernel/trace/trace_events_hist.c:5518
kernel/trace/trace_events_hist.c:5998
kernel/trace/trace_events_hist.c:6019
kernel/trace/trace_events_hist.c:6044
kernel/trace/trace_events_trigger.c:1500
kernel/trace/trace_events_trigger.c:1540
kernel/trace/trace_events_trigger.c:539
kernel/trace/trace_events_trigger.c:584
-----
I investigated those warnings and found that the RCU-list
traversals in event trigger and hist didn't need to use
RCU version because those were called only under event_mutex.
I also checked other RCU-list traversals related to event
trigger list, and found that most of them were called from
event_hist_trigger_func() or hist_unregister_trigger() or
register/unregister functions except for a few cases.
Replace these unneeded RCU-list traversals with normal list
traversal macro and lockdep_assert_held() to check the
event_mutex is held.
Link: http://lkml.kernel.org/r/157680910305.11685.15110237954275915782.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 30350d65ac ("tracing: Add variable support to hist triggers")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Also fixes a couple of typos
Link: http://lkml.kernel.org/r/1401992525-10417-1-git-send-email-fabf@skynet.be
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
[ Found this deep in the abyss of my INBOX ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix double perf_event linking to trace_uprobe_filter on
multiple uprobe event by moving trace_uprobe_filter under
trace_probe_event.
In uprobe perf event, trace_uprobe_filter data structure is
managing target mm filters (in perf_event) related to each
uprobe event.
Since commit 60d53e2c3b ("tracing/probe: Split trace_event
related data from trace_probe") left the trace_uprobe_filter
data structure in trace_uprobe, if a trace_probe_event has
multiple trace_uprobe (multi-probe event), a perf_event is
added to different trace_uprobe_filter on each trace_uprobe.
This leads a linked list corruption.
To fix this issue, move trace_uprobe_filter to trace_probe_event
and link it once on each event instead of each probe.
Link: http://lkml.kernel.org/r/157862073931.1800.3800576241181489174.stgit@devnote2
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S . Miller" <davem@davemloft.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: =?utf-8?q?Toke_H=C3=B8iland-J?= =?utf-8?b?w7hyZ2Vuc2Vu?= <thoiland@redhat.com>
Cc: Jean-Tsung Hsiao <jhsiao@redhat.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 60d53e2c3b ("tracing/probe: Split trace_event related data from trace_probe")
Link: https://lkml.kernel.org/r/20200108171611.GA8472@kernel.org
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Merge misc fixes from David Howells.
Two afs fixes and a key refcounting fix.
* dhowells:
afs: Fix afs_lookup() to not clobber the version on a new dentry
afs: Fix use-after-loss-of-ref
keys: Fix request_key() cache
Instead of using bpf_struct_ops_map_lookup_elem() which is
not implemented, bpf_struct_ops_map_seq_show_elem() should
also use bpf_struct_ops_map_sys_lookup_elem() which does
an inplace update to the value. The change allocates
a value to pass to bpf_struct_ops_map_sys_lookup_elem().
[root@arch-fb-vm1 bpf]# cat /sys/fs/bpf/dctcp
{{{1}},BPF_STRUCT_OPS_STATE_INUSE,{{00000000df93eebc,00000000df93eebc},0,2, ...
Fixes: 85d33df357 ("bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200114072647.3188298-1-kafai@fb.com
When the key cached by request_key() and co. is cleaned up on exit(),
the code looks in the wrong task_struct, and so clears the wrong cache.
This leads to anomalies in key refcounting when doing, say, a kernel
build on an afs volume, that then trigger kasan to report a
use-after-free when the key is viewed in /proc/keys.
Fix this by making exit_creds() look in the passed-in task_struct rather
than in current (the task_struct cleanup code is deferred by RCU and
potentially run in another task).
Fixes: 7743c48e54 ("keys: Cache result of request_key*() temporarily in task_struct")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The name mmu_notifier_mm implies that the thing is a mm_struct pointer,
and is difficult to abbreviate. The struct is actually holding the
interval tree and hlist containing the notifiers subscribed to a mm.
Use 'subscriptions' as the variable name for this struct instead of the
really terrible and misleading 'mmn_mm'.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
API to set time namespace offsets for children processes, i.e.:
echo "$clockid $offset_sec $offset_nsec" > /proc/self/timens_offsets
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-28-dima@arista.com
The VVAR page layout depends on whether a task belongs to the root or
non-root time namespace. Whenever a task changes its namespace, the VVAR
page tables are cleared and then they will be re-faulted with a
corresponding layout.
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-27-dima@arista.com
VDSO support for Time namespace needs to set up a page with the same
layout as VVAR. That timens page will be placed on position of VVAR page
inside namespace. That page contains time namespace clock offsets and it
has vdso_data->seq set to 1 to enforce the slow path and
vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace
handling path.
Allocate the timens page during namespace creation. Setup the offsets
when the first task enters the ns and freeze them to guarantee the pace
of monotonic/boottime clocks and to avoid breakage of applications.
The design decision is to have a global offset_lock which is used during
namespace offsets setup and to freeze offsets when the first task joins the
new time namespace. That is better in terms of memory usage compared to
having a per namespace mutex that's used only during the setup period.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Based-on-work-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-24-dima@arista.com
clock_nanosleep() accepts absolute values of expiration time, if the
TIMER_ABSTIME flag is set. This value is in the tasks time namespace,
which has to be converted to the host time namespace.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-18-dima@arista.com
clock_nanosleep() accepts absolute values of expiration time when
TIMER_ABSTIME flag is set. This absolute value is inside the task's
time namespace, and has to be converted to the host's time.
There is timens_ktime_to_host() helper for converting time, but
it accepts ktime argument.
As a preparation, make hrtimer_nanosleep() accept a clock value in ktime
instead of timespec64.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-17-dima@arista.com
clock_nanosleep() accepts absolute values of expiration time when the
TIMER_ABSTIME flag is set. This absolute value is inside the task's
time namespace and has to be converted to the host's time.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-16-dima@arista.com
Wire timer_settime() syscall into time namespace virtualization.
sys_timer_settime() calls the ktime->timer_set() callback. Right now,
common_timer_set() is the only implementation for the callback.
The user-supplied expiry value is converted from timespec64 to ktime and
then timens_ktime_to_host() can be used to convert namespace's time to the
host time.
Inside a time namespace kernel's time differs by a fixed offset from a
user-supplied time, but only absolute values (TIMER_ABSTIME) must be
converted.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-15-dima@arista.com
The helper subtracts namespace's clock offset from the given time
and ensures that the result is within [0, KTIME_MAX].
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-13-dima@arista.com
Adjust monotonic and boottime clocks with per-timens offsets. As the
result a process inside time namespace will see timers and clocks corrected
to offsets that were set when the namespace was created
Note that applications usually go through vDSO to get time, which is not
yet adjusted. Further changes will complete time namespace virtualisation
with vDSO support.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-12-dima@arista.com
Now, when the clock_get_ktime() callback exists, the suboptimal
timespec64-based conversion can be removed from common_timer_get().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-11-dima@arista.com
The callsite in common_timer_get() has already a comment:
/*
* The timespec64 based conversion is suboptimal, but it's not
* worth to implement yet another callback.
*/
kc->clock_get(timr->it_clock, &ts64);
now = timespec64_to_ktime(ts64);
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-10-dima@arista.com
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
Wire up alarm bases with get_timespec().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-9-dima@arista.com
The upcoming support for time namespaces requires to have access to:
- The time in a tasks time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
struct alarm_base needs to follow the same naming convention, so rename
.gettime() callback into get_ktime() as a preparation for introducing
get_timespec().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-8-dima@arista.com
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format in (struct k_clock).
As a preparation ground for introducing clock_get_ktime(), the original
callback clock_get() was renamed into clock_get_timespec().
Reflect the renaming into the callback implementations.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-7-dima@arista.com
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format, rather than in (struct timespec).
Rename the clock_get() callback to clock_get_timespec() as a preparation
for introducing clock_get_ktime().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-6-dima@arista.com
Introduce offsets for time namespace. They will contain an adjustment
needed to convert clocks to/from host's.
A new namespace is created with the same offsets as the time namespace
of the current process.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-5-dima@arista.com
Time Namespace isolates clock values.
The kernel provides access to several clocks CLOCK_REALTIME,
CLOCK_MONOTONIC, CLOCK_BOOTTIME, etc.
CLOCK_REALTIME
System-wide clock that measures real (i.e., wall-clock) time.
CLOCK_MONOTONIC
Clock that cannot be set and represents monotonic time since
some unspecified starting point.
CLOCK_BOOTTIME
Identical to CLOCK_MONOTONIC, except it also includes any time
that the system is suspended.
For many users, the time namespace means the ability to changes date and
time in a container (CLOCK_REALTIME). Providing per namespace notions of
CLOCK_REALTIME would be complex with a massive overhead, but has a dubious
value.
But in the context of checkpoint/restore functionality, monotonic and
boottime clocks become interesting. Both clocks are monotonic with
unspecified starting points. These clocks are widely used to measure time
slices and set timers. After restoring or migrating processes, it has to be
guaranteed that they never go backward. In an ideal case, the behavior of
these clocks should be the same as for a case when a whole system is
suspended. All this means that it is required to set CLOCK_MONOTONIC and
CLOCK_BOOTTIME clocks, which can be achieved by adding per-namespace
offsets for clocks.
A time namespace is similar to a pid namespace in the way how it is
created: unshare(CLONE_NEWTIME) system call creates a new time namespace,
but doesn't set it to the current process. Then all children of the process
will be born in the new time namespace, or a process can use the setns()
system call to join a namespace.
This scheme allows setting clock offsets for a namespace, before any
processes appear in it.
All available clone flags have been used, so CLONE_NEWTIME uses the highest
bit of CSIGNAL. It means that it can be used only with the unshare() and
the clone3() system calls.
[ tglx: Adjusted paragraph about clone3() to reality and massaged the
changelog a bit. ]
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://criu.org/Time_namespace
Link: https://lists.openvz.org/pipermail/criu/2018-June/041504.html
Link: https://lore.kernel.org/r/20191112012724.250792-4-dima@arista.com
With CONFIG_PROVE_RCU_LIST, I had many suspicious RCU warnings
when I ran ftracetest trigger testcases.
-----
# dmesg -c > /dev/null
# ./ftracetest test.d/trigger
...
# dmesg | grep "RCU-list traversed" | cut -f 2 -d ] | cut -f 2 -d " "
kernel/trace/trace_events_hist.c:6070
kernel/trace/trace_events_hist.c:1760
kernel/trace/trace_events_hist.c:5911
kernel/trace/trace_events_trigger.c:504
kernel/trace/trace_events_hist.c:1810
kernel/trace/trace_events_hist.c:3158
kernel/trace/trace_events_hist.c:3105
kernel/trace/trace_events_hist.c:5518
kernel/trace/trace_events_hist.c:5998
kernel/trace/trace_events_hist.c:6019
kernel/trace/trace_events_hist.c:6044
kernel/trace/trace_events_trigger.c:1500
kernel/trace/trace_events_trigger.c:1540
kernel/trace/trace_events_trigger.c:539
kernel/trace/trace_events_trigger.c:584
-----
I investigated those warnings and found that the RCU-list
traversals in event trigger and hist didn't need to use
RCU version because those were called only under event_mutex.
I also checked other RCU-list traversals related to event
trigger list, and found that most of them were called from
event_hist_trigger_func() or hist_unregister_trigger() or
register/unregister functions except for a few cases.
Replace these unneeded RCU-list traversals with normal list
traversal macro and lockdep_assert_held() to check the
event_mutex is held.
Link: http://lkml.kernel.org/r/157680910305.11685.15110237954275915782.stgit@devnote2
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This syscall allows for the retrieval of file descriptors from other
processes, based on their pidfd. This is possible using ptrace, and
injection of parasitic code to inject code which leverages SCM_RIGHTS
to move file descriptors between a tracee and a tracer. Unfortunately,
ptrace comes with a high cost of requiring the process to be stopped,
and breaks debuggers. This does not require stopping the process under
manipulation.
One reason to use this is to allow sandboxers to take actions on file
descriptors on the behalf of another process. For example, this can be
combined with seccomp-bpf's user notification to do on-demand fd
extraction and take privileged actions. One such privileged action
is binding a socket to a privileged port.
/* prototype */
/* flags is currently reserved and should be set to 0 */
int sys_pidfd_getfd(int pidfd, int fd, unsigned int flags);
/* testing */
Ran self-test suite on x86_64
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200107175927.4558-3-sargun@sargun.me
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Add below function-tracer filter options to boot-time tracing.
- ftrace.[instance.INSTANCE.]ftrace.filters
This will take an array of tracing function filter rules
- ftrace.[instance.INSTANCE.]ftrace.notraces
This will take an array of NON-tracing function filter rules
Link: http://lkml.kernel.org/r/157867244841.17873.10933616628243103561.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add ftrace.cpumask option support to boot-time tracing.
This sets cpumask for each instance.
- ftrace.[instance.INSTANCE.]cpumask = CPUMASK;
Set the trace cpumask. Note that the CPUMASK should be a string
which <tracefs>/tracing_cpumask can accepts.
Link: http://lkml.kernel.org/r/157867243625.17873.13613922641273149372.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add instance node support to boot-time tracing. User can set
some options and event nodes under instance node.
- ftrace.instance.INSTANCE[...]
Add new INSTANCE instance. Some options and event nodes
are acceptable for instance node.
Link: http://lkml.kernel.org/r/157867242413.17873.9814204526141500278.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add synthetic event node support to boot time tracing.
The synthetic event is a kind of event node, but the group
name is "synthetic".
- ftrace.event.synthetic.EVENT.fields = FIELD[, FIELD2...]
Defines new synthetic event with FIELDs. Each field should be
"type varname".
The synthetic node requires "fields" string arraies, which defines
the fields as same as tracing/synth_events interface.
Link: http://lkml.kernel.org/r/157867241236.17873.12411615143321557709.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add kprobe event support on event node to boot-time tracing.
If the group name of event is "kprobes", the boot-time tracing
defines new probe event according to "probes" values.
- ftrace.event.kprobes.EVENT.probes = PROBE[, PROBE2...]
Defines new kprobe event based on PROBEs. It is able to define
multiple probes on one event, but those must have same type of
arguments.
For example,
ftrace.events.kprobes.myevent {
probes = "vfs_read $arg1 $arg2";
enable;
}
This will add kprobes:myevent on vfs_read with the 1st and the 2nd
arguments.
Link: http://lkml.kernel.org/r/157867240104.17873.9712052065426433111.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add per-event settings for boottime tracing. User can set filter,
actions and enable on each event on boot. The event entries are
under ftrace.event.GROUP.EVENT node (note that the option key
includes event's group name and event name.) This supports below
configs.
- ftrace.event.GROUP.EVENT.enable
Enables GROUP:EVENT tracing.
- ftrace.event.GROUP.EVENT.filter = FILTER
Set FILTER rule to the GROUP:EVENT.
- ftrace.event.GROUP.EVENT.actions = ACTION[, ACTION2...]
Set ACTIONs to the GROUP:EVENT.
For example,
ftrace.event.sched.sched_process_exec {
filter = "pid < 128"
enable
}
this will enable tracing "sched:sched_process_exec" event
with "pid < 128" filter.
Link: http://lkml.kernel.org/r/157867238942.17873.11177628789184546198.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Setup tracing options via extra boot config in addition to kernel
command line.
This adds following commands support. These are applied to
the global trace instance.
- ftrace.options = OPT1[,OPT2...]
Enable given ftrace options.
- ftrace.trace_clock = CLOCK
Set given CLOCK to ftrace's trace_clock.
- ftrace.buffer_size = SIZE
Configure ftrace buffer size to SIZE. You can use "KB" or "MB"
for that SIZE.
- ftrace.events = EVENT[, EVENT2...]
Enable given events on boot. You can use a wild card in EVENT.
- ftrace.tracer = TRACER
Set TRACER to current tracer on boot. (e.g. function)
Note that this is NOT replacing the kernel parameters, because
this boot config based setting is later than that. If you want to
trace earlier boot events, you still need kernel parameters.
Link: http://lkml.kernel.org/r/157867237723.17873.17494943526320587488.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Make the synthetic event accepts a different type field to record.
However, the size and signed flag must be same.
Link: http://lkml.kernel.org/r/157867235358.17873.61732996461602171.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Register kprobe event to dynevent in subsys_initcall level.
This will allow kernel to register new kprobe events in
fs_initcall level via trace_run_command.
Link: http://lkml.kernel.org/r/157867234213.17873.18039000024374948737.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Since kprobe-events use event_trigger_unlock_commit_regs() directly,
that events doesn't show up in printk buffer if "tp_printk" is set.
Use trace_event_buffer_commit() in kprobe events so that it can
invoke output_printk() as same as other trace events.
Link: http://lkml.kernel.org/r/157867233085.17873.5210928676787339604.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Adjusted data var declaration placement in __kretprobe_trace_func() ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Apply soft-disabled and the filter rule of the trace events to
the printk output of tracepoints (a.k.a. tp_printk kernel parameter)
as same as trace buffer output.
Link: http://lkml.kernel.org/r/157867231876.17873.15825819592284704068.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As there's two struct ring_buffers in the kernel, it causes some confusion.
The other one being the perf ring buffer. It was agreed upon that as neither
of the ring buffers are generic enough to be used globally, they should be
renamed as:
perf's ring_buffer -> perf_buffer
ftrace's ring_buffer -> trace_buffer
This implements the changes to the ring buffer that ftrace uses.
Link: https://lore.kernel.org/r/20191213140531.116b3200@gandalf.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As we are working to remove the generic "ring_buffer" name that is used by
both tracing and perf, the ring_buffer name for tracing will be renamed to
trace_buffer, and perf's ring buffer will be renamed to perf_buffer.
As there already exists a trace_buffer that is used by the trace_arrays, it
needs to be first renamed to array_buffer.
Link: https://lore.kernel.org/r/20191213153553.GE20583@krava
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
eBPF requires needing to know the size of the perf ring buffer structure.
But it unfortunately has the same name as the generic ring buffer used by
tracing and oprofile. To make it less ambiguous, rename the perf ring buffer
structure to "perf_buffer".
As other parts of the ring buffer code has "perf_" as the prefix, it only
makes sense to give the ring buffer the "perf_" prefix as well.
Link: https://lore.kernel.org/r/20191213153553.GE20583@krava
Acked-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXhhtDQAKCRCRxhvAZXjc
orQ3AQD7H2ovZbPIpWbwOnRIExBF4O8gPDfFc/J/RweZx40v/AD/QwfFnq0TpmUc
UfS4zzLxJ4K+L4RYWId5v8MFHGIu8QQ=
=LmmJ
-----END PGP SIGNATURE-----
Merge tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fixes from Christian Brauner:
"This contains a series of patches to fix CLONE_SETTLS when used with
clone3().
The clone3() syscall passes the tls argument through struct clone_args
instead of a register. This means, all architectures that do not
implement copy_thread_tls() but still support CLONE_SETTLS via
copy_thread() expecting the tls to be located in a register argument
based on clone() are currently unfortunately broken. Their tls value
will be garbage.
The patch series fixes this on all architectures that currently define
__ARCH_WANT_SYS_CLONE3. It also adds a compile-time check to ensure
that any architecture that enables clone3() in the future is forced to
also implement copy_thread_tls().
My ultimate goal is to get rid of the copy_thread()/copy_thread_tls()
split and just have copy_thread_tls() at some point in the not too
distant future (Maybe even renaming copy_thread_tls() back to simply
copy_thread() once the old function is ripped from all arches). This
is dependent now on all arches supporting clone3().
While all relevant arches do that now there are still four missing:
ia64, m68k, sh and sparc. They have the system call reserved, but not
implemented. Once they all implement clone3() we can get rid of
ARCH_WANT_SYS_CLONE3 and HAVE_COPY_THREAD_TLS.
This series also includes a minor fix for the arm64 uapi headers which
caused __NR_clone3 to be missing from the exported user headers.
Unfortunately the series came in a little late especially given that
it touches a range of architectures. Due to the holidays not all arch
maintainers responded in time probably due to their backlog. Will and
Arnd have thankfully acked the arm specific changes.
Given that the changes are straightforward and rather minimal combined
with the fact the that clone3() with CLONE_SETTLS is broken I decided
to send them post rc3 nonetheless"
* tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
um: Implement copy_thread_tls
clone3: ensure copy_thread_tls is implemented
xtensa: Implement copy_thread_tls
riscv: Implement copy_thread_tls
parisc: Implement copy_thread_tls
arm: Implement copy_thread_tls
arm64: Implement copy_thread_tls
arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers
New llvm and old llvm with libbpf help produce BTF that distinguish global and
static functions. Unlike arguments of static function the arguments of global
functions cannot be removed or optimized away by llvm. The compiler has to use
exactly the arguments specified in a function prototype. The argument type
information allows the verifier validate each global function independently.
For now only supported argument types are pointer to context and scalars. In
the future pointers to structures, sizes, pointer to packet data can be
supported as well. Consider the following example:
static int f1(int ...)
{
...
}
int f3(int b);
int f2(int a)
{
f1(a) + f3(a);
}
int f3(int b)
{
...
}
int main(...)
{
f1(...) + f2(...) + f3(...);
}
The verifier will start its safety checks from the first global function f2().
It will recursively descend into f1() because it's static. Then it will check
that arguments match for the f3() invocation inside f2(). It will not descend
into f3(). It will finish f2() that has to be successfully verified for all
possible values of 'a'. Then it will proceed with f3(). That function also has
to be safe for all possible values of 'b'. Then it will start subprog 0 (which
is main() function). It will recursively descend into f1() and will skip full
check of f2() and f3(), since they are global. The order of processing global
functions doesn't affect safety, since all global functions must be proven safe
based on their arguments only.
Such function by function verification can drastically improve speed of the
verification and reduce complexity.
Note that the stack limit of 512 still applies to the call chain regardless whether
functions were static or global. The nested level of 8 also still applies. The
same recursion prevention checks are in place as well.
The type information and static/global kind is preserved after the verification
hence in the above example global function f2() and f3() can be replaced later
by equivalent functions with the same types that are loaded and verified later
without affecting safety of this main() program. Such replacement (re-linking)
of global functions is a subject of future patches.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-3-ast@kernel.org
There is a spelling mistake in a pr_info message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As tests are added to kunit, it will become less feasible to execute
all built tests together. By supporting modular tests we provide
a simple way to do selective execution on a running system; specifying
CONFIG_KUNIT=y
CONFIG_KUNIT_EXAMPLE_TEST=m
...means we can simply "insmod example-test.ko" to run the tests.
To achieve this we need to do the following:
o export the required symbols in kunit
o string-stream tests utilize non-exported symbols so for now we skip
building them when CONFIG_KUNIT_TEST=m.
o drivers/base/power/qos-test.c contains a few unexported interface
references, namely freq_qos_read_value() and freq_constraints_init().
Both of these could be potentially defined as static inline functions
in include/linux/pm_qos.h, but for now we simply avoid supporting
module build for that test suite.
o support a new way of declaring test suites. Because a module cannot
do multiple late_initcall()s, we provide a kunit_test_suites() macro
to declare multiple suites within the same module at once.
o some test module names would have been too general ("test-test"
and "example-test" for kunit tests, "inode-test" for ext4 tests);
rename these as appropriate ("kunit-test", "kunit-example-test"
and "ext4-inode-test" respectively).
Also define kunit_test_suite() via kunit_test_suites()
as callers in other trees may need the old definition.
Co-developed-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Theodore Ts'o <tytso@mit.edu> # for ext4 bits
Acked-by: David Gow <davidgow@google.com> # For list-test
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The ungrafting from PRIO bug fixes in net, when merged into net-next,
merge cleanly but create a build failure. The resolution used here is
from Petr Machata.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Missing netns pointer init in arp_tables, from Florian Westphal.
2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang.
3) Fix divide by zero in sch_cake, from Wen Yang.
4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl
Huang.
5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long.
6) cgroup bpf programs can be released out of order, fix from Roman
Gushchin.
7) Make sure stmmac debugfs entry name is changed when device name
changes, from Jiping Ma.
8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric
Dumazet.
9) SKB leak in lan78xx usb driver, also from Eric Dumazet.
10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq
packet scheduler, reject them. From Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
tipc: fix wrong connect() return code
tipc: fix link overflow issue at socket shutdown
netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
netfilter: conntrack: dccp, sctp: handle null timeout argument
atm: eni: fix uninitialized variable warning
macvlan: do not assume mac_header is set in macvlan_broadcast()
net: sch_prio: When ungrafting, replace with FIFO
mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos
gtp: fix bad unlock balance in gtp_encap_enable_socket
pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
tipc: remove meaningless assignment in Makefile
tipc: do not add socket.o to tipc-y twice
net: stmmac: dwmac-sun8i: Allow all RGMII modes
net: stmmac: dwmac-sunxi: Allow all RGMII modes
net: usb: lan78xx: fix possible skb leak
net: stmmac: Fixed link does not need MDIO Bus
vlan: vlan_changelink() should propagate errors
vlan: fix memory leak in vlan_dev_set_egress_priority
stmmac: debugfs entry name is not be changed when udev rename device name.
...
Instead of issueing a warning if sched_clock_register() is called from a
context where IRQs are enabled, the code now ensures that IRQs are indeed
disabled.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200107010630.954648-1-paul@crapouillou.net
Using compat_sys_getitimer and compat_sys_setitimer on alpha
causes a link failure in the Alpha tinyconfig and other configurations
that turn off CONFIG_POSIX_TIMERS.
Use the same #ifdef check for the stub version as well.
Fixes: 4c22ea2b91 ("y2038: use compat_{get,set}_itimer on alpha")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191207191043.656328-1-arnd@arndb.de
This patch makes "struct tcp_congestion_ops" to be the first user
of BPF STRUCT_OPS. It allows implementing a tcp_congestion_ops
in bpf.
The BPF implemented tcp_congestion_ops can be used like
regular kernel tcp-cc through sysctl and setsockopt. e.g.
[root@arch-fb-vm1 bpf]# sysctl -a | egrep congestion
net.ipv4.tcp_allowed_congestion_control = reno cubic bpf_cubic
net.ipv4.tcp_available_congestion_control = reno bic cubic bpf_cubic
net.ipv4.tcp_congestion_control = bpf_cubic
There has been attempt to move the TCP CC to the user space
(e.g. CCP in TCP). The common arguments are faster turn around,
get away from long-tail kernel versions in production...etc,
which are legit points.
BPF has been the continuous effort to join both kernel and
userspace upsides together (e.g. XDP to gain the performance
advantage without bypassing the kernel). The recent BPF
advancements (in particular BTF-aware verifier, BPF trampoline,
BPF CO-RE...) made implementing kernel struct ops (e.g. tcp cc)
possible in BPF. It allows a faster turnaround for testing algorithm
in the production while leveraging the existing (and continue growing)
BPF feature/framework instead of building one specifically for
userspace TCP CC.
This patch allows write access to a few fields in tcp-sock
(in bpf_tcp_ca_btf_struct_access()).
The optional "get_info" is unsupported now. It can be added
later. One possible way is to output the info with a btf-id
to describe the content.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003508.3856115-1-kafai@fb.com
The patch introduces BPF_MAP_TYPE_STRUCT_OPS. The map value
is a kernel struct with its func ptr implemented in bpf prog.
This new map is the interface to register/unregister/introspect
a bpf implemented kernel struct.
The kernel struct is actually embedded inside another new struct
(or called the "value" struct in the code). For example,
"struct tcp_congestion_ops" is embbeded in:
struct bpf_struct_ops_tcp_congestion_ops {
refcount_t refcnt;
enum bpf_struct_ops_state state;
struct tcp_congestion_ops data; /* <-- kernel subsystem struct here */
}
The map value is "struct bpf_struct_ops_tcp_congestion_ops".
The "bpftool map dump" will then be able to show the
state ("inuse"/"tobefree") and the number of subsystem's refcnt (e.g.
number of tcp_sock in the tcp_congestion_ops case). This "value" struct
is created automatically by a macro. Having a separate "value" struct
will also make extending "struct bpf_struct_ops_XYZ" easier (e.g. adding
"void (*init)(void)" to "struct bpf_struct_ops_XYZ" to do some
initialization works before registering the struct_ops to the kernel
subsystem). The libbpf will take care of finding and populating the
"struct bpf_struct_ops_XYZ" from "struct XYZ".
Register a struct_ops to a kernel subsystem:
1. Load all needed BPF_PROG_TYPE_STRUCT_OPS prog(s)
2. Create a BPF_MAP_TYPE_STRUCT_OPS with attr->btf_vmlinux_value_type_id
set to the btf id "struct bpf_struct_ops_tcp_congestion_ops" of the
running kernel.
Instead of reusing the attr->btf_value_type_id,
btf_vmlinux_value_type_id s added such that attr->btf_fd can still be
used as the "user" btf which could store other useful sysadmin/debug
info that may be introduced in the furture,
e.g. creation-date/compiler-details/map-creator...etc.
3. Create a "struct bpf_struct_ops_tcp_congestion_ops" object as described
in the running kernel btf. Populate the value of this object.
The function ptr should be populated with the prog fds.
4. Call BPF_MAP_UPDATE with the object created in (3) as
the map value. The key is always "0".
During BPF_MAP_UPDATE, the code that saves the kernel-func-ptr's
args as an array of u64 is generated. BPF_MAP_UPDATE also allows
the specific struct_ops to do some final checks in "st_ops->init_member()"
(e.g. ensure all mandatory func ptrs are implemented).
If everything looks good, it will register this kernel struct
to the kernel subsystem. The map will not allow further update
from this point.
Unregister a struct_ops from the kernel subsystem:
BPF_MAP_DELETE with key "0".
Introspect a struct_ops:
BPF_MAP_LOOKUP_ELEM with key "0". The map value returned will
have the prog _id_ populated as the func ptr.
The map value state (enum bpf_struct_ops_state) will transit from:
INIT (map created) =>
INUSE (map updated, i.e. reg) =>
TOBEFREE (map value deleted, i.e. unreg)
The kernel subsystem needs to call bpf_struct_ops_get() and
bpf_struct_ops_put() to manage the "refcnt" in the
"struct bpf_struct_ops_XYZ". This patch uses a separate refcnt
for the purose of tracking the subsystem usage. Another approach
is to reuse the map->refcnt and then "show" (i.e. during map_lookup)
the subsystem's usage by doing map->refcnt - map->usercnt to filter out
the map-fd/pinned-map usage. However, that will also tie down the
future semantics of map->refcnt and map->usercnt.
The very first subsystem's refcnt (during reg()) holds one
count to map->refcnt. When the very last subsystem's refcnt
is gone, it will also release the map->refcnt. All bpf_prog will be
freed when the map->refcnt reaches 0 (i.e. during map_free()).
Here is how the bpftool map command will look like:
[root@arch-fb-vm1 bpf]# bpftool map show
6: struct_ops name dctcp flags 0x0
key 4B value 256B max_entries 1 memlock 4096B
btf_id 6
[root@arch-fb-vm1 bpf]# bpftool map dump id 6
[{
"value": {
"refcnt": {
"refs": {
"counter": 1
}
},
"state": 1,
"data": {
"list": {
"next": 0,
"prev": 0
},
"key": 0,
"flags": 2,
"init": 24,
"release": 0,
"ssthresh": 25,
"cong_avoid": 30,
"set_state": 27,
"cwnd_event": 28,
"in_ack_event": 26,
"undo_cwnd": 29,
"pkts_acked": 0,
"min_tso_segs": 0,
"sndbuf_expand": 0,
"cong_control": 0,
"get_info": 0,
"name": [98,112,102,95,100,99,116,99,112,0,0,0,0,0,0,0
],
"owner": 0
}
}
}
]
Misc Notes:
* bpf_struct_ops_map_sys_lookup_elem() is added for syscall lookup.
It does an inplace update on "*value" instead returning a pointer
to syscall.c. Otherwise, it needs a separate copy of "zero" value
for the BPF_STRUCT_OPS_STATE_INIT to avoid races.
* The bpf_struct_ops_map_delete_elem() is also called without
preempt_disable() from map_delete_elem(). It is because
the "->unreg()" may requires sleepable context, e.g.
the "tcp_unregister_congestion_control()".
* "const" is added to some of the existing "struct btf_func_model *"
function arg to avoid a compiler warning caused by this patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003505.3855919-1-kafai@fb.com
This patch allows the kernel's struct ops (i.e. func ptr) to be
implemented in BPF. The first use case in this series is the
"struct tcp_congestion_ops" which will be introduced in a
latter patch.
This patch introduces a new prog type BPF_PROG_TYPE_STRUCT_OPS.
The BPF_PROG_TYPE_STRUCT_OPS prog is verified against a particular
func ptr of a kernel struct. The attr->attach_btf_id is the btf id
of a kernel struct. The attr->expected_attach_type is the member
"index" of that kernel struct. The first member of a struct starts
with member index 0. That will avoid ambiguity when a kernel struct
has multiple func ptrs with the same func signature.
For example, a BPF_PROG_TYPE_STRUCT_OPS prog is written
to implement the "init" func ptr of the "struct tcp_congestion_ops".
The attr->attach_btf_id is the btf id of the "struct tcp_congestion_ops"
of the _running_ kernel. The attr->expected_attach_type is 3.
The ctx of BPF_PROG_TYPE_STRUCT_OPS is an array of u64 args saved
by arch_prepare_bpf_trampoline that will be done in the next
patch when introducing BPF_MAP_TYPE_STRUCT_OPS.
"struct bpf_struct_ops" is introduced as a common interface for the kernel
struct that supports BPF_PROG_TYPE_STRUCT_OPS prog. The supporting kernel
struct will need to implement an instance of the "struct bpf_struct_ops".
The supporting kernel struct also needs to implement a bpf_verifier_ops.
During BPF_PROG_LOAD, bpf_struct_ops_find() will find the right
bpf_verifier_ops by searching the attr->attach_btf_id.
A new "btf_struct_access" is also added to the bpf_verifier_ops such
that the supporting kernel struct can optionally provide its own specific
check on accessing the func arg (e.g. provide limited write access).
After btf_vmlinux is parsed, the new bpf_struct_ops_init() is called
to initialize some values (e.g. the btf id of the supporting kernel
struct) and it can only be done once the btf_vmlinux is available.
The R0 checks at BPF_EXIT is excluded for the BPF_PROG_TYPE_STRUCT_OPS prog
if the return type of the prog->aux->attach_func_proto is "void".
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003503.3855825-1-kafai@fb.com
This patch allows bitfield access as a scalar.
It checks "off + size > t->size" to avoid accessing bitfield
end up accessing beyond the struct. This check is done
outside of the loop since it is applicable to all access.
It also takes this chance to break early on the "off < moff" case.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003501.3855427-1-kafai@fb.com
It allows bpf prog (e.g. tracing) to attach
to a kernel function that takes enum argument.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003459.3855366-1-kafai@fb.com
info->btf_id expects the btf_id of a struct, so it should
store the final result after skipping modifiers (if any).
It also takes this chanace to add a missing newline in one of the
bpf_log() messages.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003456.3855176-1-kafai@fb.com
This patch makes the verifier save the PTR_TO_BTF_ID register state when
spilling to the stack.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200109003454.3854870-1-kafai@fb.com
When CONFIG_SYSFS is disabled, but CONFIG_HOTPLUG_SMT is enabled,
the kernel fails to link:
arch/x86/power/cpu.o: In function `hibernate_resume_nonboot_cpu_disable':
(.text+0x38d): undefined reference to `cpuhp_smt_enable'
arch/x86/power/hibernate.o: In function `arch_resume_nosmt':
hibernate.c:(.text+0x291): undefined reference to `cpuhp_smt_enable'
hibernate.c:(.text+0x29c): undefined reference to `cpuhp_smt_disable'
Move the exported functions out of the #ifdef section into its
own with the correct conditions.
The patch that caused this is marked for stable backports, so
this one may need to be backported as well.
Fixes: ec527c3180 ("x86/power: Fix 'nosmt' vs hibernation triple fault during resume")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191210195614.786555-1-arnd@arndb.de
Requesting a threaded IRQ with handler=NULL and !ONESHOT fails, but the
error message does not include the IRQ line name, which makes it harder to
find the offending driver.
Print the IRQ line name to clarify where the error comes from. Use the same
format as the other pr_err() above in the same function.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191105140854.27893-1-luca@lucaceresoli.net
Fix a kernel-doc warning in kernel/futex.c by adding notation
for @ret.
../kernel/futex.c:1187: warning: Function parameter or member 'ret' not described in 'wait_for_owner_exiting'
Fixes: 3ef240eaff ("futex: Prevent exit livelock")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/223be78c-f3c8-52df-836d-c5fb8e7907e9@infradead.org
optimize_kprobe() and unoptimize_kprobe() cancels if a given kprobe
is on the optimizing_list or unoptimizing_list already. However, since
the following commit:
f66c0447cc ("kprobes: Set unoptimized flag after unoptimizing code")
modified the update timing of the KPROBE_FLAG_OPTIMIZED, it doesn't
work as expected anymore.
The optimized_kprobe could be in the following states:
- [optimizing]: Before inserting jump instruction
op.kp->flags has KPROBE_FLAG_OPTIMIZED and
op->list is not empty.
- [optimized]: jump inserted
op.kp->flags has KPROBE_FLAG_OPTIMIZED and
op->list is empty.
- [unoptimizing]: Before removing jump instruction (including unused
optprobe)
op.kp->flags has KPROBE_FLAG_OPTIMIZED and
op->list is not empty.
- [unoptimized]: jump removed
op.kp->flags doesn't have KPROBE_FLAG_OPTIMIZED and
op->list is empty.
Current code mis-expects [unoptimizing] state doesn't have
KPROBE_FLAG_OPTIMIZED, and that can cause incorrect results.
To fix this, introduce optprobe_queued_unopt() to distinguish [optimizing]
and [unoptimizing] states and fixes the logic in optimize_kprobe() and
unoptimize_kprobe().
[ mingo: Cleaned up the changelog and the code a bit. ]
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Fixes: f66c0447cc ("kprobes: Set unoptimized flag after unoptimizing code")
Link: https://lkml.kernel.org/r/157840814418.7181.13478003006386303481.stgit@devnote2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It is the same as machine_kexec_prepare(), but is called after segments are
loaded. This way, can do processing work with already loaded relocation
segments. One such example is arm64: it has to have segments loaded in
order to create a page table, but it cannot do it during kexec time,
because at that time allocations won't be possible anymore.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Here is a regular kexec command sequence and output:
=====
$ kexec --reuse-cmdline -i --load Image
$ kexec -e
[ 161.342002] kexec_core: Starting new kernel
Welcome to Buildroot
buildroot login:
=====
Even when "quiet" kernel parameter is specified, "kexec_core: Starting
new kernel" is printed.
This message has KERN_EMERG level, but there is no emergency, it is a
normal kexec operation, so quiet it down to appropriate KERN_NOTICE.
Machines that have slow console baud rate benefit from less output.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
In module_add_modinfo_attrs() if sysfs_create_file() fails
on the first iteration of the loop (so i = 0), we forget to
free the modinfo_attrs.
Fixes: bc6f2a757d ("kernel/module: Fix mem leak in module_add_modinfo_attrs")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
copy_thread implementations handle CLONE_SETTLS by reading the TLS
value from the registers containing the syscall arguments for
clone. This doesn't work with clone3 since the TLS value is passed
in clone_args instead.
Signed-off-by: Amanieu d'Antras <amanieu@gmail.com>
Cc: <stable@vger.kernel.org> # 5.3.x
Link: https://lore.kernel.org/r/20200102172413.654385-8-amanieu@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Hibernation fails when the kernel cannot allocate enough memory
to copy all pages of RAM in use.
Ensure that the failure reason is clearly logged, and clearly
attributable to the hibernation module.
Signed-off-by: Luigi Semenzato <semenzato@google.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
do_div() does a 64-by-32 division. Use div64_u64() instead of
do_div() if the divisor is u64, to avoid truncation to 32-bit.
This change also cleans up code a tad.
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- kbuild found missing define of MCOUNT_INSN_SIZE for various build configs
- Initialize variable to zero as gcc thinks it is used undefined
(it really isn't but the code is subtle enough that this doesn't hurt)
- Convert from do_div() to div64_ull() to prevent potential divide by zero
- Unregister a trace point on error path in sched_wakeup tracer
- Use signed offset for archs that can have stext not be first
- A simple indentation fix (whitespace error)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXhOj6xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qukzAQCMNfkAbMFA+C1uORMhr/jWhi4eshWN
4jZ2u5X8zGuuXQD+PaQU4n8d0K4uCPF+lFD16DfFxXvCOXHfN3/zXmxGvw8=
=djaW
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various tracing fixes:
- kbuild found missing define of MCOUNT_INSN_SIZE for various build
configs
- Initialize variable to zero as gcc thinks it is used undefined (it
really isn't but the code is subtle enough that this doesn't hurt)
- Convert from do_div() to div64_ull() to prevent potential divide by
zero
- Unregister a trace point on error path in sched_wakeup tracer
- Use signed offset for archs that can have stext not be first
- A simple indentation fix (whitespace error)"
* tag 'trace-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix indentation issue
kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail
tracing: Change offset type to s32 in preempt/irq tracepoints
ftrace: Avoid potential division by zero in function profiler
tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined
tracing: Define MCOUNT_INSN_SIZE when not defined without direct calls
tracing: Initialize val to zero in parse_entry of inject code
Before commit 4bfc0bb2c6 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
cgroup bpf structures were released with
corresponding cgroup structures. It guaranteed the hierarchical order
of destruction: children were always first. It preserved attached
programs from being released before their propagated copies.
But with cgroup auto-detachment there are no such guarantees anymore:
cgroup bpf is released as soon as the cgroup is offline and there are
no live associated sockets. It means that an attached program can be
detached and released, while its propagated copy is still living
in the cgroup subtree. This will obviously lead to an use-after-free
bug.
To reproduce the issue the following script can be used:
#!/bin/bash
CGROOT=/sys/fs/cgroup
mkdir -p ${CGROOT}/A ${CGROOT}/B ${CGROOT}/A/C
sleep 1
./test_cgrp2_attach ${CGROOT}/A egress &
A_PID=$!
./test_cgrp2_attach ${CGROOT}/B egress &
B_PID=$!
echo $$ > ${CGROOT}/A/C/cgroup.procs
iperf -s &
S_PID=$!
iperf -c localhost -t 100 &
C_PID=$!
sleep 1
echo $$ > ${CGROOT}/B/cgroup.procs
echo ${S_PID} > ${CGROOT}/B/cgroup.procs
echo ${C_PID} > ${CGROOT}/B/cgroup.procs
sleep 1
rmdir ${CGROOT}/A/C
rmdir ${CGROOT}/A
sleep 1
kill -9 ${S_PID} ${C_PID} ${A_PID} ${B_PID}
On the unpatched kernel the following stacktrace can be obtained:
[ 33.619799] BUG: unable to handle page fault for address: ffffbdb4801ab002
[ 33.620677] #PF: supervisor read access in kernel mode
[ 33.621293] #PF: error_code(0x0000) - not-present page
[ 33.622754] Oops: 0000 [#1] SMP NOPTI
[ 33.623202] CPU: 0 PID: 601 Comm: iperf Not tainted 5.5.0-rc2+ #23
[ 33.625545] RIP: 0010:__cgroup_bpf_run_filter_skb+0x29f/0x3d0
[ 33.635809] Call Trace:
[ 33.636118] ? __cgroup_bpf_run_filter_skb+0x2bf/0x3d0
[ 33.636728] ? __switch_to_asm+0x40/0x70
[ 33.637196] ip_finish_output+0x68/0xa0
[ 33.637654] ip_output+0x76/0xf0
[ 33.638046] ? __ip_finish_output+0x1c0/0x1c0
[ 33.638576] __ip_queue_xmit+0x157/0x410
[ 33.639049] __tcp_transmit_skb+0x535/0xaf0
[ 33.639557] tcp_write_xmit+0x378/0x1190
[ 33.640049] ? _copy_from_iter_full+0x8d/0x260
[ 33.640592] tcp_sendmsg_locked+0x2a2/0xdc0
[ 33.641098] ? sock_has_perm+0x10/0xa0
[ 33.641574] tcp_sendmsg+0x28/0x40
[ 33.641985] sock_sendmsg+0x57/0x60
[ 33.642411] sock_write_iter+0x97/0x100
[ 33.642876] new_sync_write+0x1b6/0x1d0
[ 33.643339] vfs_write+0xb6/0x1a0
[ 33.643752] ksys_write+0xa7/0xe0
[ 33.644156] do_syscall_64+0x5b/0x1b0
[ 33.644605] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by grabbing a reference to the bpf structure of each ancestor
on the initialization of the cgroup bpf structure, and dropping the
reference at the end of releasing the cgroup bpf structure.
This will restore the hierarchical order of cgroup bpf releasing,
without adding any operations on hot paths.
Thanks to Josef Bacik for the debugging and the initial analysis of
the problem.
Fixes: 4bfc0bb2c6 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The cred_jar kmem_cache is already memcg accounted in the current kernel
but cred->security is not. Account cred->security to kmemcg.
Recently we saw high root slab usage on our production and on further
inspection, we found a buggy application leaking processes. Though that
buggy application was contained within its memcg but we observe much
more system memory overhead, couple of GiBs, during that period. This
overhead can adversely impact the isolation on the system.
One source of high overhead we found was cred->security objects, which
have a lifetime of at least the life of the process which allocated
them.
Link: http://lkml.kernel.org/r/20191205223721.40034-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXg9C5wAKCRCRxhvAZXjc
oiZXAPsGFXyDCWlKnShBpKufdFh6XugADlyZK0Si2ISWQoJJsgD/Ri1g3zg6V7YC
HBG0sz8+vSk/Ys55yDQz+K1d1MTkdQ4=
=8uQe
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2020-01-03' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fixes from Christian Brauner:
"Here are two fixes:
- Panic earlier when global init exits to generate useable coredumps.
Currently, when global init and all threads in its thread-group
have exited we panic via:
do_exit()
-> exit_notify()
-> forget_original_parent()
-> find_child_reaper()
This makes it hard to extract a useable coredump for global init
from a kernel crashdump because by the time we panic exit_mm() will
have already released global init's mm. We now panic slightly
earlier. This has been a problem in certain environments such as
Android.
- Fix a race in assigning and reading taskstats for thread-groups
with more than one thread.
This patch has been waiting for quite a while since people
disagreed on what the correct fix was at first"
* tag 'for-linus-2020-01-03' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
exit: panic before exit_mm() on global init exit
taskstats: fix data-race
In the function, if register_trace_sched_migrate_task() returns error,
sched_switch/sched_wakeup_new/sched_wakeup won't unregister. That is
why fail_deprobe_sched_switch was added.
Link: http://lkml.kernel.org/r/20191231133530.2794-1-pilgrimtao@gmail.com
Cc: stable@vger.kernel.org
Fixes: 478142c39c ("tracing: do not grab lock in wakeup latency function tracing")
Signed-off-by: Kaitao Cheng <pilgrimtao@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The ftrace_profile->counter is unsigned long and
do_div truncates it to 32 bits, which means it can test
non-zero and be truncated to zero for division.
Fix this issue by using div64_ul() instead.
Link: http://lkml.kernel.org/r/20200103030248.14516-1-wenyang@linux.alibaba.com
Cc: stable@vger.kernel.org
Fixes: e330b3bcd8 ("tracing: Show sample std dev in function profiling")
Fixes: 34886c8bc5 ("tracing: add average time in function to function profiler")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
On some archs with some configurations, MCOUNT_INSN_SIZE is not defined, and
this makes the stack tracer fail to compile. Just define it to zero in this
case.
Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com
Cc: stable@vger.kernel.org
Fixes: 4df297129f ("tracing: Remove most or all of stack tracer stack size from stack_max_size")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In order to handle direct calls along side of function graph tracer, a check
is made to see if the address being traced by the function graph tracer is a
direct call or not. To get the address used by direct callers, the return
address is subtracted by MCOUNT_INSN_SIZE.
For some archs with certain configurations, MCOUNT_INSN_SIZE is undefined
here. But these should not be using direct calls anyway. Just define
MCOUNT_INSN_SIZE to zero in this case.
Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: ff205766db ("ftrace: Fix function_graph tracer interaction with BPF trampoline")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Fix samples and selftests to zero passed-in buffer (Sargun Dhillon)
- Enforce zeroed buffer checking (Sargun Dhillon)
- Verify buffer sanity check in selftest (Sargun Dhillon)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=WgBI
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"Fixes for seccomp_notify_ioctl uapi sanity from Sargun Dhillon.
The bulk of this is fixing the surrounding samples and selftests so
that seccomp can correctly validate the seccomp_notify_ioctl buffer as
being initially zeroed.
Summary:
- Fix samples and selftests to zero passed-in buffer
- Enforce zeroed buffer checking
- Verify buffer sanity check in selftest"
* tag 'seccomp-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Catch garbage on SECCOMP_IOCTL_NOTIF_RECV
seccomp: Check that seccomp_notif is zeroed out by the user
selftests/seccomp: Zero out seccomp_notif
samples/seccomp: Zero out members based on seccomp_notif_sizes
gcc produces a variable may be uninitialized warning for "val" in
parse_entry(). This is really a false positive, but the code is subtle
enough to just initialize val to zero and it's not a fast path to worry
about it.
Marked for stable to remove the warning in the stable trees as well.
Cc: stable@vger.kernel.org
Fixes: 6c3edaf9fd ("tracing: Introduce trace event injection")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch is a small change in enforcement of the uapi for
SECCOMP_IOCTL_NOTIF_RECV ioctl. Specifically, the datastructure which
is passed (seccomp_notif) must be zeroed out. Previously any of its
members could be set to nonsense values, and we would ignore it.
This ensures all fields are set to their zero value.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Acked-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20191229062451.9467-2-sargun@sargun.me
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Commit f92b070f2d ("printk: Do not miss new messages when replaying
the log") introduced a new variable @exclusive_console_stop_seq to
store when an exclusive console should stop printing. It should be
set to the @console_seq value at registration. However, @console_seq
is previously set to @syslog_seq so that the exclusive console knows
where to begin. This results in the exclusive console immediately
reactivating all the other consoles and thus repeating the messages
for those consoles.
Set @console_seq after @exclusive_console_stop_seq has stored the
current @console_seq value.
Fixes: f92b070f2d ("printk: Do not miss new messages when replaying the log")
Link: http://lkml.kernel.org/r/20191219115322.31160-1-john.ogness@linutronix.de
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying
device is removed, closing this file leads to a race. This reproduces
easily in a kvm virtual machine:
ts# cat openptp0.c
int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); }
ts# uname -r
5.5.0-rc3-46cf053e
ts# cat /proc/cmdline
... slub_debug=FZP
ts# modprobe ptp_kvm
ts# ./openptp0 &
[1] 670
opened /dev/ptp0, sleeping 10s...
ts# rmmod ptp_kvm
ts# ls /dev/ptp*
ls: cannot access '/dev/ptp*': No such file or directory
ts# ...woken up
[ 48.010809] general protection fault: 0000 [#1] SMP
[ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25
[ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
[ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80
[ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202
[ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0
[ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b
[ 48.019470] ... ^^^ a slub poison
[ 48.023854] Call Trace:
[ 48.024050] __fput+0x21f/0x240
[ 48.024288] task_work_run+0x79/0x90
[ 48.024555] do_exit+0x2af/0xab0
[ 48.024799] ? vfs_write+0x16a/0x190
[ 48.025082] do_group_exit+0x35/0x90
[ 48.025387] __x64_sys_exit_group+0xf/0x10
[ 48.025737] do_syscall_64+0x3d/0x130
[ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 48.026479] RIP: 0033:0x7f53b12082f6
[ 48.026792] ...
[ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm]
[ 48.045001] Fixing recursive fault but reboot is needed!
This happens in:
static void __fput(struct file *file)
{ ...
if (file->f_op->release)
file->f_op->release(inode, file); <<< cdev is kfree'd here
if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL &&
!(mode & FMODE_PATH))) {
cdev_put(inode->i_cdev); <<< cdev fields are accessed here
Namely:
__fput()
posix_clock_release()
kref_put(&clk->kref, delete_clock) <<< the last reference
delete_clock()
delete_ptp_clock()
kfree(ptp) <<< cdev is embedded in ptp
cdev_put
module_put(p->owner) <<< *p is kfree'd, bang!
Here cdev is embedded in posix_clock which is embedded in ptp_clock.
The race happens because ptp_clock's lifetime is controlled by two
refcounts: kref and cdev.kobj in posix_clock. This is wrong.
Make ptp_clock's sysfs device a parent of cdev with cdev_device_add()
created especially for such cases. This way the parent device with its
ptp_clock is not released until all references to the cdev are released.
This adds a requirement that an initialized but not exposed struct
device should be provided to posix_clock_register() by a caller instead
of a simple dev_t.
This approach was adopted from the commit 72139dfa24 ("watchdog: Fix
the race between the release of watchdog_core_data and cdev"). See
details of the implementation in the commit 233ed09d7f ("chardev: add
helper function to register char devs with a struct device").
Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u
Analyzed-by: Stephen Johnston <sjohnsto@redhat.com>
Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-12-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 127 non-merge commits during the last 17 day(s) which contain
a total of 110 files changed, 6901 insertions(+), 2721 deletions(-).
There are three merge conflicts. Conflicts and resolution looks as follows:
1) Merge conflict in net/bpf/test_run.c:
There was a tree-wide cleanup c593642c8b ("treewide: Use sizeof_field() macro")
which gets in the way with b590cb5f80 ("bpf: Switch to offsetofend in
BPF_PROG_TEST_RUN"):
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) +
sizeof_field(struct __sk_buff, priority),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority),
>>>>>>> 7c8dce4b16
There are a few occasions that look similar to this. Always take the chunk with
offsetofend(). Note that there is one where the fields differ in here:
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) +
sizeof_field(struct __sk_buff, tstamp),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs),
>>>>>>> 7c8dce4b16
Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to
850a88cc40 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN").
2) Merge conflict in arch/riscv/net/bpf_jit_comp.c:
(I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.)
<<<<<<< HEAD
if (is_13b_check(off, insn))
return -1;
emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
=======
emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx);
>>>>>>> 7c8dce4b16
Result should look like:
emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx);
3) Merge conflict in arch/riscv/include/asm/pgtable.h:
<<<<<<< HEAD
=======
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
#define vmemmap ((struct page *)VMEMMAP_START)
>>>>>>> 7c8dce4b16
Only take the BPF_* defines from there and move them higher up in the
same file. Remove the rest from the chunk. The VMALLOC_* etc defines
got moved via 01f52e16b8 ("riscv: define vmemmap before pfn_to_page
calls"). Result:
[...]
#define __S101 PAGE_READ_EXEC
#define __S110 PAGE_SHARED_EXEC
#define __S111 PAGE_SHARED_EXEC
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
[...]
Let me know if there are any other issues.
Anyway, the main changes are:
1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific
to a provided BPF object file. This provides an alternative, simplified API
compared to standard libbpf interaction. Also, add libbpf extern variable
resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko.
2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by
generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also,
add various BPF riscv JIT improvements, from Björn Töpel.
3) Extend bpftool to allow matching BPF programs and maps by name,
from Paul Chaignon.
4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI
flag for allowing updates without service interruption, from Andrey Ignatov.
5) Cleanup and simplification of ring access functions for AF_XDP with a
bonus of 0-5% performance improvement, from Magnus Karlsson.
6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of
audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa.
7) Move and extend test_select_reuseport into BPF program tests under
BPF selftests, from Jakub Sitnicki.
8) Various BPF sample improvements for xdpsock for customizing parameters
to set up and benchmark AF_XDP, from Jay Jayatheerthan.
9) Improve libbpf to provide a ulimit hint on permission denied errors.
Also change XDP sample programs to attach in driver mode by default,
from Toke Høiland-Jørgensen.
10) Extend BPF test infrastructure to allow changing skb mark from tc BPF
programs, from Nikita V. Shirokov.
11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King.
12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after
libbpf conversion, from Jesper Dangaard Brouer.
13) Minor misc improvements from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If the lockdep code is really running out of the stack_trace entries,
it is likely that buffer overrun can happen and the data immediately
after stack_trace[] will be corrupted.
If there is less than LOCK_TRACE_SIZE_IN_LONGS entries left before
the call to save_trace(), the max_entries computation will leave it
with a very large positive number because of its unsigned nature. The
subsequent call to stack_trace_save() will then corrupt the data after
stack_trace[]. Fix that by changing max_entries to a signed integer
and check for negative value before calling stack_trace_save().
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 12593b7467 ("locking/lockdep: Reduce space occupied by stack traces")
Link: https://lkml.kernel.org/r/20191220135128.14876-1-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Capacity Awareness refers to the fact that on heterogeneous systems
(like Arm big.LITTLE), the capacity of the CPUs is not uniform, hence
when placing tasks we need to be aware of this difference of CPU
capacities.
In such scenarios we want to ensure that the selected CPU has enough
capacity to meet the requirement of the running task. Enough capacity
means here that capacity_orig_of(cpu) >= task.requirement.
The definition of task.requirement is dependent on the scheduling class.
For CFS, utilization is used to select a CPU that has >= capacity value
than the cfs_task.util.
capacity_orig_of(cpu) >= cfs_task.util
DL isn't capacity aware at the moment but can make use of the bandwidth
reservation to implement that in a similar manner CFS uses utilization.
The following patchset implements that:
https://lore.kernel.org/lkml/20190506044836.2914-1-luca.abeni@santannapisa.it/
capacity_orig_of(cpu)/SCHED_CAPACITY >= dl_deadline/dl_runtime
For RT we don't have a per task utilization signal and we lack any
information in general about what performance requirement the RT task
needs. But with the introduction of uclamp, RT tasks can now control
that by setting uclamp_min to guarantee a minimum performance point.
ATM the uclamp value are only used for frequency selection; but on
heterogeneous systems this is not enough and we need to ensure that the
capacity of the CPU is >= uclamp_min. Which is what implemented here.
capacity_orig_of(cpu) >= rt_task.uclamp_min
Note that by default uclamp.min is 1024, which means that RT tasks will
always be biased towards the big CPUs, which make for a better more
predictable behavior for the default case.
Must stress that the bias acts as a hint rather than a definite
placement strategy. For example, if all big cores are busy executing
other RT tasks we can't guarantee that a new RT task will be placed
there.
On non-heterogeneous systems the original behavior of RT should be
retained. Similarly if uclamp is not selected in the config.
[ mingo: Minor edits to comments. ]
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191009104611.15363-1-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
task_fits_capacity() has just been made uclamp-aware, and
find_energy_efficient_cpu() needs to go through the same treatment.
Things are somewhat different here however - using the task max clamp isn't
sufficient. Consider the following setup:
The target runqueue, rq:
rq.cpu_capacity_orig = 512
rq.cfs.avg.util_avg = 200
rq.uclamp.max = 768 // the max p.uclamp.max of all enqueued p's is 768
The waking task, p (not yet enqueued on rq):
p.util_est = 600
p.uclamp.max = 100
Now, consider the following code which doesn't use the rq clamps:
util = uclamp_task_util(p);
// Does the task fit in the spare CPU capacity?
cpu = cpu_of(rq);
fits_capacity(util, cpu_capacity(cpu) - cpu_util(cpu))
This would lead to:
util = 100;
fits_capacity(100, 512 - 200)
fits_capacity() would return true. However, enqueuing p on that CPU *will*
cause it to become overutilized since rq clamp values are max-aggregated,
so we'd remain with
rq.uclamp.max = 768
which comes from the other tasks already enqueued on rq. Thus, we could
select a high enough frequency to reach beyond 0.8 * 512 utilization
(== overutilized) after enqueuing p on rq. What find_energy_efficient_cpu()
needs here is uclamp_rq_util_with() which lets us peek at the future
utilization landscape, including rq-wide uclamp values.
Make find_energy_efficient_cpu() use uclamp_rq_util_with() for its
fits_capacity() check. This is in line with what compute_energy() ends up
using for estimating utilization.
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-6-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
task_fits_capacity() drives CPU selection at wakeup time, and is also used
to detect misfit tasks. Right now it does so by comparing task_util_est()
with a CPU's capacity, but doesn't take into account uclamp restrictions.
There's a few interesting uses that can come out of doing this. For
instance, a low uclamp.max value could prevent certain tasks from being
flagged as misfit tasks, so they could merrily remain on low-capacity CPUs.
Similarly, a high uclamp.min value would steer tasks towards high capacity
CPUs at wakeup (and, should that fail, later steered via misfit balancing),
so such "boosted" tasks would favor CPUs of higher capacity.
Introduce uclamp_task_util() and make task_fits_capacity() use it.
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-5-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current helper returns (CPU) rq utilization with uclamp restrictions
taken into account. A uclamp task utilization helper would be quite
helpful, but this requires some renaming.
Prepare the code for the introduction of a uclamp_task_util() by renaming
the existing uclamp_util_with() to uclamp_rq_util_with().
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-4-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vincent pointed out recently that the canonical type for utilization
values is 'unsigned long'. Internally uclamp uses 'unsigned int' values for
cache optimization, but this doesn't have to be exported to its users.
Make the uclamp helpers that deal with utilization use and return unsigned
long values.
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-3-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The sole user of uclamp_util(), schedutil_cpu_util(), was made to use
uclamp_util_with() instead in commit:
af24bde8df ("sched/uclamp: Add uclamp support to energy_compute()")
From then on, uclamp_util() has remained unused. Being a simple wrapper
around uclamp_util_with(), we can get rid of it and win back a few lines.
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Suggested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-2-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are instances where we keep searching for an idle CPU despite
already having a sched-idle CPU (in find_idlest_group_cpu(),
select_idle_smt() and select_idle_cpu() and then there are places where
we don't necessarily do that and return a sched-idle CPU as soon as we
find one (in select_idle_sibling()). This looks a bit inconsistent and
it may be worth having the same policy everywhere.
On the other hand, choosing a sched-idle CPU over a idle one shall be
beneficial from performance and power point of view as well, as we don't
need to get the CPU online from a deep idle state which wastes quite a
lot of time and energy and delays the scheduling of the newly woken up
task.
This patch tries to simplify code around sched-idle CPU selection and
make it consistent throughout.
Testing is done with the help of rt-app on hikey board (ARM64 octa-core,
2 clusters, 0-3 and 4-7). The cpufreq governor was set to performance to
avoid any side affects from CPU frequency. Following are the tests
performed:
Test 1: 1-cfs-task:
A single SCHED_NORMAL task is pinned to CPU5 which runs for 2333 us
out of 7777 us (so gives time for the cluster to go in deep idle
state).
Test 2: 1-cfs-1-idle-task:
A single SCHED_NORMAL task is pinned on CPU5 and single SCHED_IDLE
task is pinned on CPU6 (to make sure cluster 1 doesn't go in deep idle
state).
Test 3: 1-cfs-8-idle-task:
A single SCHED_NORMAL task is pinned on CPU5 and eight SCHED_IDLE
tasks are created which run forever (not pinned anywhere, so they run
on all CPUs). Checked with kernelshark that as soon as NORMAL task
sleeps, the SCHED_IDLE task starts running on CPU5.
And here are the results on mean latency (in us), using the "st" tool.
$ st 1-cfs-task/rt-app-cfs_thread-0.log
N min max sum mean stddev
642 90 592 197180 307.134 109.906
$ st 1-cfs-1-idle-task/rt-app-cfs_thread-0.log
N min max sum mean stddev
642 67 311 113850 177.336 41.4251
$ st 1-cfs-8-idle-task/rt-app-cfs_thread-0.log
N min max sum mean stddev
643 29 173 41364 64.3297 13.2344
The mean latency when we need to:
- wakeup from deep idle state is 307 us.
- wakeup from shallow idle state is 177 us.
- preempt a SCHED_IDLE task is 64 us.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/b90cbcce608cef4e02a7bbfe178335f76d201bab.1573728344.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit left behind an unused variable:
5443a0be61 ("sched: Use fair:prio_changed() instead of ad-hoc implementation") left behind an unused variable.
kernel/sched/core.c: In function 'set_user_nice':
kernel/sched/core.c:4507:16: warning: variable 'delta' set but not used
int old_prio, delta;
^~~~~
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 5443a0be61 ("sched: Use fair:prio_changed() instead of ad-hoc implementation")
Link: https://lkml.kernel.org/r/20191219140314.1252-1-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It is preferrable to reject unknown flags within rseq unregistration
rather than to ignore them. It is an oversight caused by the fact that
the check for unknown flags is after the rseq unregister flag check.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211161713.4490-2-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Anatoly has been fuzzing with kBdysch harness and reported a hang in one
of the outcomes. Upon closer analysis, it turns out that precise scalar
value tracking is missing a few precision markings for unknown scalars:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r0 = 0
1: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (35) if r0 >= 0xf72e goto pc+0
--> only follow fallthrough
2: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0
2: (35) if r0 >= 0x80fe0000 goto pc+0
--> only follow fallthrough
3: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0
3: (14) w0 -= -536870912
4: R0_w=invP536870912 R1=ctx(id=0,off=0,imm=0) R10=fp0
4: (0f) r1 += r0
5: R0_w=invP536870912 R1_w=inv(id=0) R10=fp0
5: (55) if r1 != 0x104c1500 goto pc+0
--> push other branch for later analysis
R0_w=invP536870912 R1_w=inv273421568 R10=fp0
6: R0_w=invP536870912 R1_w=inv273421568 R10=fp0
6: (b7) r0 = 0
7: R0=invP0 R1=inv273421568 R10=fp0
7: (76) if w1 s>= 0xffffff00 goto pc+3
--> only follow goto
11: R0=invP0 R1=inv273421568 R10=fp0
11: (95) exit
6: R0_w=invP536870912 R1_w=inv(id=0) R10=fp0
6: (b7) r0 = 0
propagating r0
7: safe
processed 11 insns [...]
In the analysis of the second path coming after the successful exit above,
the path is being pruned at line 7. Pruning analysis found that both r0 are
precise P0 and both R1 are non-precise scalars and given prior path with
R1 as non-precise scalar succeeded, this one is therefore safe as well.
However, problem is that given condition at insn 7 in the first run, we only
followed goto and didn't push the other branch for later analysis, we've
never walked the few insns in there and therefore dead-code sanitation
rewrites it as goto pc-1, causing the hang depending on the skb address
hitting these conditions. The issue is that R1 should have been marked as
precise as well such that pruning enforces range check and conluded that new
R1 is not in range of old R1. In insn 4, we mark R1 (skb) as unknown scalar
via __mark_reg_unbounded() but not mark_reg_unbounded() and therefore
regs->precise remains as false.
Back in b5dc0163d8 ("bpf: precise scalar_value tracking"), this was not
the case since marking out of __mark_reg_unbounded() had this covered as well.
Once in both are set as precise in 4 as they should have been, we conclude
that given R1 was in prior fall-through path 0x104c1500 and now is completely
unknown, the check at insn 7 concludes that we need to continue walking.
Analysis after the fix:
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
0: (b7) r0 = 0
1: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0
1: (35) if r0 >= 0xf72e goto pc+0
2: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0
2: (35) if r0 >= 0x80fe0000 goto pc+0
3: R0_w=invP0 R1=ctx(id=0,off=0,imm=0) R10=fp0
3: (14) w0 -= -536870912
4: R0_w=invP536870912 R1=ctx(id=0,off=0,imm=0) R10=fp0
4: (0f) r1 += r0
5: R0_w=invP536870912 R1_w=invP(id=0) R10=fp0
5: (55) if r1 != 0x104c1500 goto pc+0
R0_w=invP536870912 R1_w=invP273421568 R10=fp0
6: R0_w=invP536870912 R1_w=invP273421568 R10=fp0
6: (b7) r0 = 0
7: R0=invP0 R1=invP273421568 R10=fp0
7: (76) if w1 s>= 0xffffff00 goto pc+3
11: R0=invP0 R1=invP273421568 R10=fp0
11: (95) exit
6: R0_w=invP536870912 R1_w=invP(id=0) R10=fp0
6: (b7) r0 = 0
7: R0_w=invP0 R1_w=invP(id=0) R10=fp0
7: (76) if w1 s>= 0xffffff00 goto pc+3
R0_w=invP0 R1_w=invP(id=0) R10=fp0
8: R0_w=invP0 R1_w=invP(id=0) R10=fp0
8: (a5) if r0 < 0x2007002a goto pc+0
9: R0_w=invP0 R1_w=invP(id=0) R10=fp0
9: (57) r0 &= -16316416
10: R0_w=invP0 R1_w=invP(id=0) R10=fp0
10: (a6) if w0 < 0x1201 goto pc+0
11: R0_w=invP0 R1_w=invP(id=0) R10=fp0
11: (95) exit
11: R0=invP0 R1=invP(id=0) R10=fp0
11: (95) exit
processed 16 insns [...]
Fixes: 6754172c20 ("bpf: fix precision tracking in presence of bpf2bpf calls")
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191222223740.25297-1-daniel@iogearbox.net
Pull networking fixes from David Miller:
1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
including adding a missing ipv6 match description.
2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
Bhat.
3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.
4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.
5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.
6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
Chaignon.
7) Multicast MAC limit test is off by one in qede, from Manish Chopra.
8) Fix established socket lookup race when socket goes from
TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
RCU grace period. From Eric Dumazet.
9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.
10) Fix active backup transition after link failure in bonding, from
Mahesh Bandewar.
11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.
12) Fix wrong interface passed to ->mac_link_up(), from Russell King.
13) Fix DSA egress flooding settings in b53, from Florian Fainelli.
14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.
15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.
16) Reject invalid MTU values in stmmac, from Jose Abreu.
17) Fix refcount leak in error path of u32 classifier, from Davide
Caratti.
18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
Kaseorg.
19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.
20) Disable hardware GRO when XDP is attached to qede, frm Manish
Chopra.
21) Since we encode state in the low pointer bits, dst metrics must be
at least 4 byte aligned, which is not necessarily true on m68k. Add
annotations to fix this, from Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
sfc: Include XDP packet headroom in buffer step size.
sfc: fix channel allocation with brute force
net: dst: Force 4-byte alignment of dst_metrics
selftests: pmtu: fix init mtu value in description
hv_netvsc: Fix unwanted rx_table reset
net: phy: ensure that phy IDs are correctly typed
mod_devicetable: fix PHY module format
qede: Disable hardware gro when xdp prog is installed
net: ena: fix issues in setting interrupt moderation params in ethtool
net: ena: fix default tx interrupt moderation interval
net/smc: unregister ib devices in reboot_event
net: stmmac: platform: Fix MDIO init for platforms without PHY
llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
net: hisilicon: Fix a BUG trigered by wrong bytes_compl
net: dsa: ksz: use common define for tag len
s390/qeth: don't return -ENOTSUPP to userspace
s390/qeth: fix promiscuous mode after reset
s390/qeth: handle error due to unsupported transport mode
cxgb4: fix refcount init for TC-MQPRIO offload
tc-testing: initial tdc selftests for cls_u32
...
- Fix memory leak on error path of process_system_preds()
- Lock inversion fix with updating tgid recording option
- Fix histogram compare function on big endian machines
- Fix histogram trigger function on big endian machines
- Make trace_printk() irq sync on init for kprobe selftest correctness
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXf6MRxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlw6AQCny2YeASymmOjDqh9/G53UdhO539Y2
oL/2nQ8B9T9KWgD6AmmohhbX+TS9l5Nwy2/bKmRgADZ7u+2XLM2f2mYR2Ag=
=D7hI
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix memory leak on error path of process_system_preds()
- Lock inversion fix with updating tgid recording option
- Fix histogram compare function on big endian machines
- Fix histogram trigger function on big endian machines
- Make trace_printk() irq sync on init for kprobe selftest correctness
* tag 'trace-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix endianness bug in histogram trigger
samples/trace_printk: Wait for IRQ work to finish
tracing: Fix lock inversion in trace_event_enable_tgid_record()
tracing: Have the histogram compare functions convert to u64 first
tracing: Avoid memory leak in process_system_preds()
At least on PA-RISC and s390 synthetic histogram triggers are failing
selftests because trace_event_raw_event_synth() always writes a 64 bit
values, but the reader expects a field->size sized value. On little endian
machines this doesn't hurt, but on big endian this makes the reader always
read zero values.
Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-4-svens@linux.ibm.com
Cc: stable@vger.kernel.org
Fixes: 4b147936fa ("tracing: Add support for 'synthetic' events")
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Task T2 Task T3
trace_options_core_write() subsystem_open()
mutex_lock(trace_types_lock) mutex_lock(event_mutex)
set_tracer_flag()
trace_event_enable_tgid_record() mutex_lock(trace_types_lock)
mutex_lock(event_mutex)
This gives a circular dependency deadlock between trace_types_lock and
event_mutex. To fix this invert the usage of trace_types_lock and
event_mutex in trace_options_core_write(). This keeps the sequence of
lock usage consistent.
Link: http://lkml.kernel.org/r/0101016eef175e38-8ca71caf-a4eb-480d-a1e6-6f0bbc015495-000000@us-west-2.amazonses.com
Cc: stable@vger.kernel.org
Fixes: d914ba37d7 ("tracing: Add support for recording tgid of tasks")
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull scheduler fixes from Ingo Molnar:
"Misc fixes: a (rare) PSI crash fix, a CPU affinity related balancing
fix, and a toning down of active migration attempts"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cfs: fix spurious active migration
sched/fair: Fix find_idlest_group() to handle CPU affinity
psi: Fix a division error in psi poll()
sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptime
Pull perf fixes from Ingo Molnar:
"Misc fixes: a BTS fix, a PT NMI handling fix, a PMU sysfs fix and an
SRCU annotation"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Add SRCU annotation for pmus list walk
perf/x86/intel: Fix PT PMI handling
perf/x86/intel/bts: Fix the use of page_private()
perf/x86: Fix potential out-of-bounds access
Currently, when global init and all threads in its thread-group have exited
we panic via:
do_exit()
-> exit_notify()
-> forget_original_parent()
-> find_child_reaper()
This makes it hard to extract a useable coredump for global init from a
kernel crashdump because by the time we panic exit_mm() will have already
released global init's mm.
This patch moves the panic futher up before exit_mm() is called. As was the
case previously, we only panic when global init and all its threads in the
thread-group have exited.
Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
[christian.brauner@ubuntu.com: fix typo, rewrite commit message]
Link: https://lore.kernel.org/r/1576736993-10121-1-git-send-email-qiwuchen55@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Call the 64bit versions of rtc_tm time conversion to avoid the y2038 issue.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The common use-case in production is to have multiple cgroup-bpf
programs per attach type that cover multiple use-cases. Such programs
are attached with BPF_F_ALLOW_MULTI and can be maintained by different
people.
Order of programs usually matters, for example imagine two egress
programs: the first one drops packets and the second one counts packets.
If they're swapped the result of counting program will be different.
It brings operational challenges with updating cgroup-bpf program(s)
attached with BPF_F_ALLOW_MULTI since there is no way to replace a
program:
* One way to update is to detach all programs first and then attach the
new version(s) again in the right order. This introduces an
interruption in the work a program is doing and may not be acceptable
(e.g. if it's egress firewall);
* Another way is attach the new version of a program first and only then
detach the old version. This introduces the time interval when two
versions of same program are working, what may not be acceptable if a
program is not idempotent. It also imposes additional burden on
program developers to make sure that two versions of their program can
co-exist.
Solve the problem by introducing a "replace" mode in BPF_PROG_ATTACH
command for cgroup-bpf programs being attached with BPF_F_ALLOW_MULTI
flag. This mode is enabled by newly introduced BPF_F_REPLACE attach flag
and bpf_attr.replace_bpf_fd attribute to pass fd of the old program to
replace
That way user can replace any program among those attached with
BPF_F_ALLOW_MULTI flag without the problems described above.
Details of the new API:
* If BPF_F_REPLACE is set but replace_bpf_fd doesn't have valid
descriptor of BPF program, BPF_PROG_ATTACH will return corresponding
error (EINVAL or EBADF).
* If replace_bpf_fd has valid descriptor of BPF program but such a
program is not attached to specified cgroup, BPF_PROG_ATTACH will
return ENOENT.
BPF_F_REPLACE is introduced to make the user intent clear, since
replace_bpf_fd alone can't be used for this (its default value, 0, is a
valid fd). BPF_F_REPLACE also makes it possible to extend the API in the
future (e.g. add BPF_F_BEFORE and BPF_F_AFTER if needed).
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Narkyiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/30cd850044a0057bdfcaaf154b7d2f39850ba813.1576741281.git.rdna@fb.com
__cgroup_bpf_attach has a lot of identical code to handle two scenarios:
BPF_F_ALLOW_MULTI is set and unset.
Simplify it by splitting the two main steps:
* First, the decision is made whether a new bpf_prog_list entry should
be allocated or existing entry should be reused for the new program.
This decision is saved in replace_pl pointer;
* Next, replace_pl pointer is used to handle both possible states of
BPF_F_ALLOW_MULTI flag (set / unset) instead of doing similar work for
them separately.
This splitting, in turn, allows to make further simplifications:
* The check for attaching same program twice in BPF_F_ALLOW_MULTI mode
can be done before allocating cgroup storage, so that if user tries to
attach same program twice no alloc/free happens as it was before;
* pl_was_allocated becomes redundant so it's removed.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/c6193db6fe630797110b0d3ff06c125d093b834c.1576741281.git.rdna@fb.com
The cpumap flush list is used to track entries that need to flushed
from via the xdp_do_flush_map() function. This list used to be
per-map, but there is really no reason for that. Instead make the
flush list global for all devmaps, which simplifies __cpu_map_flush()
and cpu_map_alloc().
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191219061006.21980-7-bjorn.topel@gmail.com
The devmap flush list is used to track entries that need to flushed
from via the xdp_do_flush_map() function. This list used to be
per-map, but there is really no reason for that. Instead make the
flush list global for all devmaps, which simplifies __dev_map_flush()
and dev_map_init_map().
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191219061006.21980-6-bjorn.topel@gmail.com
The xskmap flush list is used to track entries that need to flushed
from via the xdp_do_flush_map() function. This list used to be
per-map, but there is really no reason for that. Instead make the
flush list global for all xskmaps, which simplifies __xsk_map_flush()
and xsk_map_alloc().
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191219061006.21980-5-bjorn.topel@gmail.com
After the RCU flavor consolidation [1], call_rcu() and
synchronize_rcu() waits for preempt-disable regions (NAPI) in addition
to the read-side critical sections. As a result of this, the cleanup
code in cpumap can be simplified
* There is no longer a need to flush in __cpu_map_entry_free, since we
know that this has been done when the call_rcu() callback is
triggered.
* When freeing the map, there is no need to explicitly wait for a
flush. It's guaranteed to be done after the synchronize_rcu() call
in cpu_map_free().
[1] https://lwn.net/Articles/777036/
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191219061006.21980-3-bjorn.topel@gmail.com
After the RCU flavor consolidation [1], call_rcu() and
synchronize_rcu() waits for preempt-disable regions (NAPI) in addition
to the read-side critical sections. As a result of this, the cleanup
code in devmap can be simplified
* There is no longer a need to flush in __dev_map_entry_free, since we
know that this has been done when the call_rcu() callback is
triggered.
* When freeing the map, there is no need to explicitly wait for a
flush. It's guaranteed to be done after the synchronize_rcu() call
in dev_map_free(). The rcu_barrier() is still needed, so that the
map is not freed prior the elements.
[1] https://lwn.net/Articles/777036/
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191219061006.21980-2-bjorn.topel@gmail.com
The compare functions of the histogram code would be specific for the size
of the value being compared (byte, short, int, long long). It would
reference the value from the array via the type of the compare, but the
value was stored in a 64 bit number. This is fine for little endian
machines, but for big endian machines, it would end up comparing zeros or
all ones (depending on the sign) for anything but 64 bit numbers.
To fix this, first derference the value as a u64 then convert it to the type
being compared.
Link: http://lkml.kernel.org/r/20191211103557.7bed6928@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 08d43a5fa0 ("tracing: Add lock-free tracing_map")
Acked-by: Tom Zanussi <zanussi@kernel.org>
Reported-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
While testing Cilium with /unreleased/ Linus' tree under BPF-based NodePort
implementation, I noticed a strange BPF SNAT engine behavior from time to
time. In some cases it would do the correct SNAT/DNAT service translation,
but at a random point in time it would just stop and perform an unexpected
translation after SYN, SYN/ACK and stack would send a RST back. While initially
assuming that there is some sort of a race condition in BPF code, adding
trace_printk()s for debugging purposes at some point seemed to have resolved
the issue auto-magically.
Digging deeper on this Heisenbug and reducing the trace_printk() calls to
an absolute minimum, it turns out that a single call would suffice to
trigger / not trigger the seen RST issue, even though the logic of the
program itself remains unchanged. Turns out the single call changed verifier
pruning behavior to get everything to work. Reconstructing a minimal test
case, the incorrect JIT dump looked as follows:
# bpftool p d j i 11346
0xffffffffc0cba96c:
[...]
21: movzbq 0x30(%rdi),%rax
26: cmp $0xd,%rax
2a: je 0x000000000000003a
2c: xor %edx,%edx
2e: movabs $0xffff89cc74e85800,%rsi
38: jmp 0x0000000000000049
3a: mov $0x2,%edx
3f: movabs $0xffff89cc74e85800,%rsi
49: mov -0x224(%rbp),%eax
4f: cmp $0x20,%eax
52: ja 0x0000000000000062
54: add $0x1,%eax
57: mov %eax,-0x224(%rbp)
5d: jmpq 0xffffffffffff6911
62: mov $0x1,%eax
[...]
Hence, unexpectedly, JIT emitted a direct jump even though retpoline based
one would have been needed since in line 2c and 3a we have different slot
keys in BPF reg r3. Verifier log of the test case reveals what happened:
0: (b7) r0 = 14
1: (73) *(u8 *)(r1 +48) = r0
2: (71) r0 = *(u8 *)(r1 +48)
3: (15) if r0 == 0xd goto pc+4
R0_w=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=ctx(id=0,off=0,imm=0) R10=fp0
4: (b7) r3 = 0
5: (18) r2 = 0xffff89cc74d54a00
7: (05) goto pc+3
11: (85) call bpf_tail_call#12
12: (b7) r0 = 1
13: (95) exit
from 3 to 8: R0_w=inv13 R1=ctx(id=0,off=0,imm=0) R10=fp0
8: (b7) r3 = 2
9: (18) r2 = 0xffff89cc74d54a00
11: safe
processed 13 insns (limit 1000000) [...]
Second branch is pruned by verifier since considered safe, but issue is that
record_func_key() couldn't have seen the index in line 3a and therefore
decided that emitting a direct jump at this location was okay.
Fix this by reusing our backtracking logic for precise scalar verification
in order to prevent pruning on the slot key. This means verifier will track
content of r3 all the way backwards and only prune if both scalars were
unknown in state equivalence check and therefore poisoned in the first place
in record_func_key(). The range is [x,x] in record_func_key() case since
the slot always would have to be constant immediate. Correct verification
after fix:
0: (b7) r0 = 14
1: (73) *(u8 *)(r1 +48) = r0
2: (71) r0 = *(u8 *)(r1 +48)
3: (15) if r0 == 0xd goto pc+4
R0_w=invP(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=ctx(id=0,off=0,imm=0) R10=fp0
4: (b7) r3 = 0
5: (18) r2 = 0x0
7: (05) goto pc+3
11: (85) call bpf_tail_call#12
12: (b7) r0 = 1
13: (95) exit
from 3 to 8: R0_w=invP13 R1=ctx(id=0,off=0,imm=0) R10=fp0
8: (b7) r3 = 2
9: (18) r2 = 0x0
11: (85) call bpf_tail_call#12
12: (b7) r0 = 1
13: (95) exit
processed 15 insns (limit 1000000) [...]
And correct corresponding JIT dump:
# bpftool p d j i 11
0xffffffffc0dc34c4:
[...]
21: movzbq 0x30(%rdi),%rax
26: cmp $0xd,%rax
2a: je 0x000000000000003a
2c: xor %edx,%edx
2e: movabs $0xffff9928b4c02200,%rsi
38: jmp 0x0000000000000049
3a: mov $0x2,%edx
3f: movabs $0xffff9928b4c02200,%rsi
49: cmp $0x4,%rdx
4d: jae 0x0000000000000093
4f: and $0x3,%edx
52: mov %edx,%edx
54: cmp %edx,0x24(%rsi)
57: jbe 0x0000000000000093
59: mov -0x224(%rbp),%eax
5f: cmp $0x20,%eax
62: ja 0x0000000000000093
64: add $0x1,%eax
67: mov %eax,-0x224(%rbp)
6d: mov 0x110(%rsi,%rdx,8),%rax
75: test %rax,%rax
78: je 0x0000000000000093
7a: mov 0x30(%rax),%rax
7e: add $0x19,%rax
82: callq 0x000000000000008e
87: pause
89: lfence
8c: jmp 0x0000000000000087
8e: mov %rax,(%rsp)
92: retq
93: mov $0x1,%eax
[...]
Also explicitly adding explicit env->allow_ptr_leaks to fixup_bpf_calls() since
backtracking is enabled under former (direct jumps as well, but use different
test). In case of only tracking different map pointers as in c93552c443 ("bpf:
properly enforce index mask to prevent out-of-bounds speculation"), pruning
cannot make such short-cuts, neither if there are paths with scalar and non-scalar
types as r3. mark_chain_precision() is only needed after we know that
register_is_const(). If it was not the case, we already poison the key on first
path and non-const key in later paths are not matching the scalar range in regsafe()
either. Cilium NodePort testing passes fine as well now. Note, released kernels
not affected.
Fixes: d2e4c1e6c2 ("bpf: Constant map key tracking for prog array pokes")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/ac43ffdeb7386c5bd688761ed266f3722bb39823.1576789878.git.daniel@iogearbox.net
The two callers of bpf_prog_realloc - bpf_patch_insn_single and
bpf_migrate_filter dereference the struct fp_old, before passing
it to the function. Thus assertion to check fp_old is unnecessary
and can be removed.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191219175735.19231-1-pakki001@umn.edu
Fix a problem related to CPU offline/online and cpufreq governors
that in some system configurations may lead to a system-wide
deadlock during CPU online.
-----BEGIN PGP SIGNATURE-----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=+MQE
-----END PGP SIGNATURE-----
Merge tag 'pm-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a problem related to CPU offline/online and cpufreq governors that
in some system configurations may lead to a system-wide deadlock
during CPU online"
* tag 'pm-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Avoid leaving stale IRQ work items during CPU offline
Take the renaming of timeval and timespec one level further,
also renaming itimerval to __kernel_old_itimerval, to avoid
namespace conflicts with the user-space structure that may
use 64-bit time_t members.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that the last user of timespec_to_jiffies() is gone, these
can just be removed, everything else is using ktime_t or timespec64
already.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As there is only a 32-bit ac_btime field in taskstat and
we should handle dates after the overflow, add a new field
with the same information but 64-bit width that can hold
a full time64_t.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In 'struct acct', 'struct acct_v3', and 'struct taskstats' we have
a 32-bit 'ac_btime' field containing an absolute time value, which
will overflow in year 2106.
There are two possible ways to deal with it:
a) let it overflow and have user space code deal with reconstructing
the data based on the current time, or
b) truncate the times based on the range of the u32 type.
Neither of them solves the actual problem. Pick the second
one to best document what the issue is, and have someone
fix it in a future version.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull locking fixes from Ingo Molnar:
"Tone down mutex debugging complaints, and annotate/fix spinlock
debugging data accesses for KCSAN"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "locking/mutex: Complain upon mutex API misuse in IRQ contexts"
locking/spinlock/debug: Fix various data races
Recently noticed that we're tracking programs related to local storage maps
through their prog pointer. This is a wrong assumption since the prog pointer
can still change throughout the verification process, for example, whenever
bpf_patch_insn_single() is called.
Therefore, the prog pointer that was assigned via bpf_cgroup_storage_assign()
is not guaranteed to be the same as we pass in bpf_cgroup_storage_release()
and the map would therefore remain in busy state forever. Fix this by using
the prog's aux pointer which is stable throughout verification and beyond.
Fixes: de9cbbaadb ("bpf: introduce cgroup storage maps")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/1471c69eca3022218666f909bc927a92388fd09e.1576580332.git.daniel@iogearbox.net
try_stop_cpus is not used after this:
commit c190c3b16c ("rcu: Switch synchronize_sched_expedited() to
stop_one_cpu()")
So remove it.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191214195107.26480-1-tiny.windzz@gmail.com
Because of the:
if (!load)
runnable = running = 0;
clause in ___update_load_sum(), all the actual users of @contrib in
accumulate_sum():
if (load)
sa->load_sum += load * contrib;
if (runnable)
sa->runnable_load_sum += runnable * contrib;
if (running)
sa->util_sum += contrib << SCHED_CAPACITY_SHIFT;
don't happen, and therefore we don't care what @contrib actually is and
calculating it is pointless.
If we count the times when @load equals zero and not as below:
if (load) {
load_is_not_zero_count++;
contrib = __accumulate_pelt_segments(periods,
1024 - sa->period_contrib,delta);
} else
load_is_zero_count++;
As we can see, load_is_zero_count is much bigger than
load_is_zero_count, and the gap is gradually widening:
load_is_zero_count: 6016044 times
load_is_not_zero_count: 244316 times
19:50:43 up 1 min, 1 user, load average: 0.09, 0.06, 0.02
load_is_zero_count: 7956168 times
load_is_not_zero_count: 261472 times
19:51:42 up 2 min, 1 user, load average: 0.03, 0.05, 0.01
load_is_zero_count: 10199896 times
load_is_not_zero_count: 278364 times
19:52:51 up 3 min, 1 user, load average: 0.06, 0.05, 0.01
load_is_zero_count: 14333700 times
load_is_not_zero_count: 318424 times
19:54:53 up 5 min, 1 user, load average: 0.01, 0.03, 0.00
Perhaps we can gain some performance advantage by saving these
unnecessary calculation.
Signed-off-by: Peng Wang <rocking@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot < vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/1576208740-35609-1-git-send-email-rocking@linux.alibaba.com
select_idle_cpu() will scan the LLC domain for idle CPUs,
it's always expensive. so the next commit :
1ad3aaf3fc ("sched/core: Implement new approach to scale select_idle_cpu()")
introduces a way to limit how many CPUs we scan.
But it consume some CPUs out of 'nr' that are not allowed
for the task and thus waste our attempts. The function
always return nr_cpumask_bits, and we can't find a CPU
which our task is allowed to run.
Cpumask may be too big, similar to select_idle_core(), use
per_cpu_ptr 'select_idle_mask' to prevent stack overflow.
Fixes: 1ad3aaf3fc ("sched/core: Implement new approach to scale select_idle_cpu()")
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20191213024530.28052-1-cj.chengjian@huawei.com
Paul reported a very sporadic, rcutorture induced, workqueue failure.
When the planets align, the workqueue rescuer's self-migrate fails and
then triggers a WARN for running a work on the wrong CPU.
Tejun then figured that set_cpus_allowed_ptr()'s stop_one_cpu() call
could be ignored! When stopper->enabled is false, stop_machine will
insta complete the work, without actually doing the work. Worse, it
will not WARN about this (we really should fix this).
It turns out there is a small window where a freshly online'ed CPU is
marked 'online' but doesn't yet have the stopper task running:
BP AP
bringup_cpu()
__cpu_up(cpu, idle) --> start_secondary()
...
cpu_startup_entry()
bringup_wait_for_ap()
wait_for_ap_thread() <-- cpuhp_online_idle()
while (1)
do_idle()
... available to run kthreads ...
stop_machine_unpark()
stopper->enable = true;
Close this by moving the stop_machine_unpark() into
cpuhp_online_idle(), such that the stopper thread is ready before we
start the idle loop and schedule.
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Debugged-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Paul E. McKenney" <paulmck@kernel.org>
init_wait_var_entry() forgets to initialize wq_entry->flags.
Currently not a problem, we don't have wait_var_event_exclusive().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20191210191902.GB14449@redhat.com
set_user_nice() implements its own version of fair::prio_changed() and
therefore misses a specific optimization towards nohz_full CPUs that
avoid sending an resched IPI to a reniced task running alone. Use the
proper callback instead.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20191203160106.18806-3-frederic@kernel.org
The runqueue of a fair task being remotely reniced is going to get a
resched IPI in order to reassess which task should be the current
running on the CPU. However that evaluation is useless if the fair task
is running alone, in which case we can spare that IPI, preventing
nohz_full CPUs from being disturbed.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20191203160106.18806-2-frederic@kernel.org
The load balance can fail to find a suitable task during the periodic check
because the imbalance is smaller than half of the load of the waiting
tasks. This results in the increase of the number of failed load balance,
which can end up to start an active migration. This active migration is
useless because the current running task is not a better choice than the
waiting ones. In fact, the current task was probably not running but
waiting for the CPU during one of the previous attempts and it had already
not been selected.
When load balance fails too many times to migrate a task, we should relax
the contraint on the maximum load of the tasks that can be migrated
similarly to what is done with cache hotness.
Before the rework, load balance used to set the imbalance to the average
load_per_task in order to mitigate such situation. This increased the
likelihood of migrating a task but also of selecting a larger task than
needed while more appropriate ones were in the list.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1575036287-6052-1-git-send-email-vincent.guittot@linaro.org
Because of CPU affinity, the local group can be skipped which breaks the
assumption that statistics are always collected for local group. With
uninitialized local_sgs, the comparison is meaningless and the behavior
unpredictable. This can even end up to use local pointer which is to
NULL in this case.
If the local group has been skipped because of CPU affinity, we return
the idlest group.
Fixes: 57abff067a ("sched/fair: Rework find_idlest_group()")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Cc: rostedt@goodmis.org
Cc: valentin.schneider@arm.com
Cc: mingo@redhat.com
Cc: mgorman@suse.de
Cc: juri.lelli@redhat.com
Cc: dietmar.eggemann@arm.com
Cc: bsegall@google.com
Cc: qais.yousef@arm.com
Link: https://lkml.kernel.org/r/1575483700-22153-1-git-send-email-vincent.guittot@linaro.org
The psi window size is a u64 an can be up to 10 seconds right now,
which exceeds the lower 32 bits of the variable. We currently use
div_u64 for it, which is meant only for 32-bit divisors. The result is
garbage pressure sampling values and even potential div0 crashes.
Use div64_u64.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Jingfeng Xie <xiejingfeng@linux.alibaba.com>
Link: https://lkml.kernel.org/r/20191203183524.41378-3-hannes@cmpxchg.org
Jingfeng reports rare div0 crashes in psi on systems with some uptime:
[58914.066423] divide error: 0000 [#1] SMP
[58914.070416] Modules linked in: ipmi_poweroff ipmi_watchdog toa overlay fuse tcp_diag inet_diag binfmt_misc aisqos(O) aisqos_hotfixes(O)
[58914.083158] CPU: 94 PID: 140364 Comm: kworker/94:2 Tainted: G W OE K 4.9.151-015.ali3000.alios7.x86_64 #1
[58914.093722] Hardware name: Alibaba Alibaba Cloud ECS/Alibaba Cloud ECS, BIOS 3.23.34 02/14/2019
[58914.102728] Workqueue: events psi_update_work
[58914.107258] task: ffff8879da83c280 task.stack: ffffc90059dcc000
[58914.113336] RIP: 0010:[] [] psi_update_stats+0x1c1/0x330
[58914.122183] RSP: 0018:ffffc90059dcfd60 EFLAGS: 00010246
[58914.127650] RAX: 0000000000000000 RBX: ffff8858fe98be50 RCX: 000000007744d640
[58914.134947] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00003594f700648e
[58914.142243] RBP: ffffc90059dcfdf8 R08: 0000359500000000 R09: 0000000000000000
[58914.149538] R10: 0000000000000000 R11: 0000000000000000 R12: 0000359500000000
[58914.156837] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8858fe98bd78
[58914.164136] FS: 0000000000000000(0000) GS:ffff887f7f380000(0000) knlGS:0000000000000000
[58914.172529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[58914.178467] CR2: 00007f2240452090 CR3: 0000005d5d258000 CR4: 00000000007606f0
[58914.185765] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[58914.193061] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[58914.200360] PKRU: 55555554
[58914.203221] Stack:
[58914.205383] ffff8858fe98bd48 00000000000002f0 0000002e81036d09 ffffc90059dcfde8
[58914.213168] ffff8858fe98bec8 0000000000000000 0000000000000000 0000000000000000
[58914.220951] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[58914.228734] Call Trace:
[58914.231337] [] psi_update_work+0x22/0x60
[58914.237067] [] process_one_work+0x189/0x420
[58914.243063] [] worker_thread+0x4e/0x4b0
[58914.248701] [] ? process_one_work+0x420/0x420
[58914.254869] [] kthread+0xe6/0x100
[58914.259994] [] ? kthread_park+0x60/0x60
[58914.265640] [] ret_from_fork+0x39/0x50
[58914.271193] Code: 41 29 c3 4d 39 dc 4d 0f 42 dc <49> f7 f1 48 8b 13 48 89 c7 48 c1
[58914.279691] RIP [] psi_update_stats+0x1c1/0x330
The crashing instruction is trying to divide the observed stall time
by the sampling period. The period, stored in R8, is not 0, but we are
dividing by the lower 32 bits only, which are all 0 in this instance.
We could switch to a 64-bit division, but the period shouldn't be that
big in the first place. It's the time between the last update and the
next scheduled one, and so should always be around 2s and comfortably
fit into 32 bits.
The bug is in the initialization of new cgroups: we schedule the first
sampling event in a cgroup as an offset of sched_clock(), but fail to
initialize the last_update timestamp, and it defaults to 0. That
results in a bogusly large sampling period the first time we run the
sampling code, and consequently we underreport pressure for the first
2s of a cgroup's life. But worse, if sched_clock() is sufficiently
advanced on the system, and the user gets unlucky, the period's lower
32 bits can all be 0 and the sampling division will crash.
Fix this by initializing the last update timestamp to the creation
time of the cgroup, thus correctly marking the start of the first
pressure sampling period in a new cgroup.
Reported-by: Jingfeng Xie <xiejingfeng@linux.alibaba.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Link: https://lkml.kernel.org/r/20191203183524.41378-2-hannes@cmpxchg.org
Since commit
28875945ba ("rcu: Add support for consolidated-RCU reader checking")
there is an additional check to ensure that a RCU related lock is held
while the RCU list is iterated.
This section holds the SRCU reader lock instead.
Add annotation to list_for_each_entry_rcu() that pmus_srcu must be
acquired during the list traversal.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lkml.kernel.org/r/20191119121429.zhcubzdhm672zasg@linutronix.de
Commit da765a2f59 ("bpf: Add poke dependency tracking for prog array
maps") wrongly assumed that in case of prog load errors, we're cleaning
up all program tracking via bpf_free_used_maps().
However, it can happen that we're still at the point where we didn't copy
map pointers into the prog's aux section such that env->prog->aux->used_maps
is still zero, running into a UAF. In such case, the verifier has similar
release_maps() helper that drops references to used maps from its env.
Consolidate the release code into __bpf_free_used_maps() and call it from
all sides to fix it.
Fixes: da765a2f59 ("bpf: Add poke dependency tracking for prog array maps")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/1c2909484ca524ae9f55109b06f22b6213e76376.1576514756.git.daniel@iogearbox.net
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=YU4A
-----END PGP SIGNATURE-----
Merge tag 'sizeof_field-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull FIELD_SIZEOF conversion from Kees Cook:
"A mostly mechanical treewide conversion from FIELD_SIZEOF() to
sizeof_field(). This avoids the redundancy of having 2 macros
(actually 3) doing the same thing, and consolidates on sizeof_field().
While "field" is not an accurate name, it is the common name used in
the kernel, and doesn't result in any unintended innuendo.
As there are still users of FIELD_SIZEOF() in -next, I will clean up
those during this coming development cycle and send the final old
macro removal patch at that time"
* tag 'sizeof_field-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
treewide: Use sizeof_field() macro
MIPS: OCTEON: Replace SIZEOF_FIELD() macro
This commit adds a BPF dispatcher for XDP. The dispatcher is updated
from the XDP control-path, dev_xdp_install(), and used when an XDP
program is run via bpf_prog_run_xdp().
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191213175112.30208-4-bjorn.topel@gmail.com
The BPF dispatcher is a multi-way branch code generator, mainly
targeted for XDP programs. When an XDP program is executed via the
bpf_prog_run_xdp(), it is invoked via an indirect call. The indirect
call has a substantial performance impact, when retpolines are
enabled. The dispatcher transform indirect calls to direct calls, and
therefore avoids the retpoline. The dispatcher is generated using the
BPF JIT, and relies on text poking provided by bpf_arch_text_poke().
The dispatcher hijacks a trampoline function it via the __fentry__ nop
of the trampoline. One dispatcher instance currently supports up to 64
dispatch points. A user creates a dispatcher with its corresponding
trampoline with the DEFINE_BPF_DISPATCHER macro.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191213175112.30208-3-bjorn.topel@gmail.com
Refactor the image allocation in the BPF trampoline code into a
separate function, so it can be shared with the BPF dispatcher in
upcoming commits.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191213175112.30208-2-bjorn.topel@gmail.com
Each of rcu_state, rcu_rnp_online_cpus(), rcu_dynticks_curr_cpu_in_eqs(),
and rcu_dynticks_snap() are used only in the kernel/rcu/tree.o translation
unit, and may thus be marked static. This commit therefore makes this
change.
Reported-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
The scheduler code calling cpufreq_update_util() may run during CPU
offline on the target CPU after the IRQ work lists have been flushed
for it, so the target CPU should be prevented from running code that
may queue up an IRQ work item on it at that point.
Unfortunately, that may not be the case if dvfs_possible_from_any_cpu
is set for at least one cpufreq policy in the system, because that
allows the CPU going offline to run the utilization update callback
of the cpufreq governor on behalf of another (online) CPU in some
cases.
If that happens, the cpufreq governor callback may queue up an IRQ
work on the CPU running it, which is going offline, and the IRQ work
may not be flushed after that point. Moreover, that IRQ work cannot
be flushed until the "offlining" CPU goes back online, so if any
other CPU calls irq_work_sync() to wait for the completion of that
IRQ work, it will have to wait until the "offlining" CPU is back
online and that may not happen forever. In particular, a system-wide
deadlock may occur during CPU online as a result of that.
The failing scenario is as follows. CPU0 is the boot CPU, so it
creates a cpufreq policy and becomes the "leader" of it
(policy->cpu). It cannot go offline, because it is the boot CPU.
Next, other CPUs join the cpufreq policy as they go online and they
leave it when they go offline. The last CPU to go offline, say CPU3,
may queue up an IRQ work while running the governor callback on
behalf of CPU0 after leaving the cpufreq policy because of the
dvfs_possible_from_any_cpu effect described above. Then, CPU0 is
the only online CPU in the system and the stale IRQ work is still
queued on CPU3. When, say, CPU1 goes back online, it will run
irq_work_sync() to wait for that IRQ work to complete and so it
will wait for CPU3 to go back online (which may never happen even
in principle), but (worse yet) CPU0 is waiting for CPU1 at that
point too and a system-wide deadlock occurs.
To address this problem notice that CPUs which cannot run cpufreq
utilization update code for themselves (for example, because they
have left the cpufreq policies that they belonged to), should also
be prevented from running that code on behalf of the other CPUs that
belong to a cpufreq policy with dvfs_possible_from_any_cpu set and so
in that case the cpufreq_update_util_data pointer of the CPU running
the code must not be NULL as well as for the CPU which is the target
of the cpufreq utilization update in progress.
Accordingly, change cpufreq_this_cpu_can_update() into a regular
function in kernel/sched/cpufreq.c (instead of a static inline in a
header file) and make it check the cpufreq_update_util_data pointer
of the local CPU if dvfs_possible_from_any_cpu is set for the target
cpufreq policy.
Also update the schedutil governor to do the
cpufreq_this_cpu_can_update() check in the non-fast-switch
case too to avoid the stale IRQ work issues.
Fixes: 99d14d0e16 ("cpufreq: Process remote callbacks from any CPU if the platform permits")
Link: https://lore.kernel.org/linux-pm/20191121093557.bycvdo4xyinbc5cb@vireshk-i7/
Reported-by: Anson Huang <anson.huang@nxp.com>
Tested-by: Anson Huang <anson.huang@nxp.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Peng Fan <peng.fan@nxp.com> (i.MX8QXP-MEK)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After Spectre 2 fix via 290af86629 ("bpf: introduce BPF_JIT_ALWAYS_ON
config") most major distros use BPF_JIT_ALWAYS_ON configuration these days
which compiles out the BPF interpreter entirely and always enables the
JIT. Also given recent fix in e1608f3fa8 ("bpf: Avoid setting bpf insns
pages read-only when prog is jited"), we additionally avoid fragmenting
the direct map for the BPF insns pages sitting in the general data heap
since they are not used during execution. Latter is only needed when run
through the interpreter.
Since both x86 and arm64 JITs have seen a lot of exposure over the years,
are generally most up to date and maintained, there is more downside in
!BPF_JIT_ALWAYS_ON configurations to have the interpreter enabled by default
rather than the JIT. Add a ARCH_WANT_DEFAULT_BPF_JIT config which archs can
use to set the bpf_jit_{enable,kallsyms} to 1. Back in the days the
bpf_jit_kallsyms knob was set to 0 by default since major distros still
had /proc/kallsyms addresses exposed to unprivileged user space which is
not the case anymore. Hence both knobs are set via BPF_JIT_DEFAULT_ON which
is set to 'y' in case of BPF_JIT_ALWAYS_ON or ARCH_WANT_DEFAULT_BPF_JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/f78ad24795c2966efcc2ee19025fa3459f622185.1575903816.git.daniel@iogearbox.net
Make BPF trampoline attach its generated assembly code to kernel functions via
register_ftrace_direct() API. It helps ftrace-based tracers co-exist with BPF
trampoline on the same kernel function. It also switches attaching logic from
arch specific text_poke to generic ftrace that is available on many
architectures. text_poke is still necessary for bpf-to-bpf attach and for
bpf_tail_call optimization.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191209000114.1876138-3-ast@kernel.org
- Removal of code I accidentally applied when doing a minor fix up
to a patch, and then using "git commit -a --amend", which pulled
in some other changes I was playing with.
- Remove an used variable in trace_events_inject code
- Fix to function graph tracer when it traces a ftrace direct function.
It will now ignore tracing a function that has a ftrace direct
tramploine attached. This is needed for eBPF to use the ftrace direct
code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXfD/thQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoo2AP4j7ONw7BTmMyo+GdYqPPntBeDnClHK
vfMKrgK1j5BxYgEA7LgkwuUT9bcyLjfJVcyfeW67rB2PtmovKTWnKihFOwI=
=DZ6N
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Remove code I accidentally applied when doing a minor fix up to a
patch, and then using "git commit -a --amend", which pulled in some
other changes I was playing with.
- Remove an used variable in trace_events_inject code
- Fix function graph tracer when it traces a ftrace direct function.
It will now ignore tracing a function that has a ftrace direct
tramploine attached. This is needed for eBPF to use the ftrace direct
code.
* tag 'trace-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix function_graph tracer interaction with BPF trampoline
tracing: remove set but not used variable 'buffer'
module: Remove accidental change of module_enable_x()
Allow for audit messages to be emitted upon BPF program load and
unload for having a timeline of events. The load itself is in
syscall context, so additional info about the process initiating
the BPF prog creation can be logged and later directly correlated
to the unload event.
The only info really needed from BPF side is the globally unique
prog ID where then audit user space tooling can query / dump all
info needed about the specific BPF program right upon load event
and enrich the record, thus these changes needed here can be kept
small and non-intrusive to the core.
Raw example output:
# auditctl -D
# auditctl -a always,exit -F arch=x86_64 -S bpf
# ausearch --start recent -m 1334
...
----
time->Wed Nov 27 16:04:13 2019
type=PROCTITLE msg=audit(1574867053.120:84664): proctitle="./bpf"
type=SYSCALL msg=audit(1574867053.120:84664): arch=c000003e syscall=321 \
success=yes exit=3 a0=5 a1=7ffea484fbe0 a2=70 a3=0 items=0 ppid=7477 \
pid=12698 auid=1001 uid=1001 gid=1001 euid=1001 suid=1001 fsuid=1001 \
egid=1001 sgid=1001 fsgid=1001 tty=pts2 ses=4 comm="bpf" \
exe="/home/jolsa/auditd/audit-testsuite/tests/bpf/bpf" \
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null)
type=UNKNOWN[1334] msg=audit(1574867053.120:84664): prog-id=76 op=LOAD
----
time->Wed Nov 27 16:04:13 2019
type=UNKNOWN[1334] msg=audit(1574867053.120:84665): prog-id=76 op=UNLOAD
...
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/bpf/20191206214934.11319-1-jolsa@kernel.org
Building with -Werror showed another failure:
kernel/bpf/btf.c: In function 'btf_get_prog_ctx_type.isra.31':
kernel/bpf/btf.c:3508:63: error: array subscript 0 is above array bounds of 'u8[0]' {aka 'unsigned char[0]'} [-Werror=array-bounds]
ctx_type = btf_type_member(conv_struct) + bpf_ctx_convert_map[prog_type] * 2;
I don't actually understand why the array is empty, but a similar
fix has addressed a related problem, so I suppose we can do the
same thing here.
Fixes: ce27709b81 ("bpf: Fix build in minimal configurations")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191210203553.2941035-1-arnd@arndb.de
Remove references to unused functions, standardize language, update to
reflect new functionality, migrate to rst format, and fix all kernel-doc
warnings.
Fixes: 815613da6a ("kernel/padata.c: removed unused code")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
reorder_objects is unused since the rework of padata's flushing, so
remove it.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 63d3578892 ("crypto: pcrypt - remove padata cpumask
notifier") this feature is unused, so get rid of it.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
lockdep complains when padata's paths to update cpumasks via CPU hotplug
and sysfs are both taken:
# echo 0 > /sys/devices/system/cpu/cpu1/online
# echo ff > /sys/kernel/pcrypt/pencrypt/parallel_cpumask
======================================================
WARNING: possible circular locking dependency detected
5.4.0-rc8-padata-cpuhp-v3+ #1 Not tainted
------------------------------------------------------
bash/205 is trying to acquire lock:
ffffffff8286bcd0 (cpu_hotplug_lock.rw_sem){++++}, at: padata_set_cpumask+0x2b/0x120
but task is already holding lock:
ffff8880001abfa0 (&pinst->lock){+.+.}, at: padata_set_cpumask+0x26/0x120
which lock already depends on the new lock.
padata doesn't take cpu_hotplug_lock and pinst->lock in a consistent
order. Which should be first? CPU hotplug calls into padata with
cpu_hotplug_lock already held, so it should have priority.
Fixes: 6751fb3c0e ("padata: Use get_online_cpus/put_online_cpus")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Configuring an instance's parallel mask without any online CPUs...
echo 2 > /sys/kernel/pcrypt/pencrypt/parallel_cpumask
echo 0 > /sys/devices/system/cpu/cpu1/online
...makes tcrypt mode=215 crash like this:
divide error: 0000 [#1] SMP PTI
CPU: 4 PID: 283 Comm: modprobe Not tainted 5.4.0-rc8-padata-doc-v2+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191013_105130-anatol 04/01/2014
RIP: 0010:padata_do_parallel+0x114/0x300
Call Trace:
pcrypt_aead_encrypt+0xc0/0xd0 [pcrypt]
crypto_aead_encrypt+0x1f/0x30
do_mult_aead_op+0x4e/0xdf [tcrypt]
test_mb_aead_speed.constprop.0.cold+0x226/0x564 [tcrypt]
do_test+0x28c2/0x4d49 [tcrypt]
tcrypt_mod_init+0x55/0x1000 [tcrypt]
...
cpumask_weight() in padata_cpu_hash() returns 0 because the mask has no
CPUs. The problem is __padata_remove_cpu() checks for valid masks too
early and so doesn't mark the instance PADATA_INVALID as expected, which
would have made padata_do_parallel() return error before doing the
division.
Fix by introducing a second padata CPU hotplug state before
CPUHP_BRINGUP_CPU so that __padata_remove_cpu() sees the online mask
without @cpu. No need for the second argument to padata_replace() since
@cpu is now already missing from the online mask.
Fixes: 33e5445068 ("padata: Handle empty padata cpumasks")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the pcrypt template is used multiple times in an algorithm, then a
deadlock occurs because all pcrypt instances share the same
padata_instance, which completes requests in the order submitted. That
is, the inner pcrypt request waits for the outer pcrypt request while
the outer request is already waiting for the inner.
This patch fixes this by allocating a set of queues for each pcrypt
instance instead of using two global queues. In order to maintain
the existing user-space interface, the pinst structure remains global
so any sysfs modifications will apply to every pcrypt instance.
Note that when an update occurs we have to allocate memory for
every pcrypt instance. Should one of the allocations fail we
will abort the update without rolling back changes already made.
The new per-instance data structure is called padata_shell and is
essentially a wrapper around parallel_data.
Reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
#include <unistd.h>
int main()
{
struct sockaddr_alg addr = {
.salg_type = "aead",
.salg_name = "pcrypt(pcrypt(rfc4106-gcm-aesni))"
};
int algfd, reqfd;
char buf[32] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (void *)&addr, sizeof(addr));
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, buf, 20);
reqfd = accept(algfd, 0, 0);
write(reqfd, buf, 32);
read(reqfd, buf, 16);
}
Reported-by: syzbot+56c7151cad94eec37c521f0e47d2eee53f9361c4@syzkaller.appspotmail.com
Fixes: 5068c7a883 ("crypto: pcrypt - Add pcrypt crypto parallelization wrapper")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function padata_remove_cpu was supposed to have been removed
along with padata_add_cpu but somehow it remained behind. Let's
kill it now as it doesn't even have a prototype anymore.
Fixes: 815613da6a ("kernel/padata.c: removed unused code")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function padata_flush_queues is fundamentally broken because
it cannot force padata users to complete the request that is
underway. IOW padata has to passively wait for the completion
of any outstanding work.
As it stands flushing is used in two places. Its use in padata_stop
is simply unnecessary because nothing depends on the queues to
be flushed afterwards.
The other use in padata_replace is more substantial as we depend
on it to free the old pd structure. This patch instead uses the
pd->refcnt to dynamically free the pd structure once all requests
are complete.
Fixes: 2b73b07ab8 ("padata: Flush the padata queues actively")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This ended up causing some noise in places such as rxrpc running in softirq.
The warning is misleading in this case as the mutex trylock and unlock
operations are done within the same context; and therefore we need not
worry about the PI-boosting issues that comes along with no single-owner
lock guarantees.
While we don't want to support this in mutexes, there is no way out of
this yet; so lets get rid of the WARNs for now, as it is only fair to
code that has historically relied on non-preemptible softirq guarantees.
In addition, changing the lock type is also unviable: exclusive rwsems
have the same issue (just not the WARN_ON) and counting semaphores
would introduce a performance hit as mutexes are a lot more optimized.
This reverts:
a0855d24fc: ("locking/mutex: Complain upon mutex API misuse in IRQ contexts")
Fixes: a0855d24fc: ("locking/mutex: Complain upon mutex API misuse in IRQ contexts")
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Tested-by: David Howells <dhowells@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-afs@lists.infradead.org
Cc: linux-fsdevel@vger.kernel.org
Cc: will@kernel.org
Link: https://lkml.kernel.org/r/20191210220523.28540-1-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Depending on type of BPF programs served by BPF trampoline it can call original
function. In such case the trampoline will skip one stack frame while
returning. That will confuse function_graph tracer and will cause crashes with
bad RIP. Teach graph tracer to skip functions that have BPF trampoline attached.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
kernel/trace/trace_events_inject.c: In function trace_inject_entry:
kernel/trace/trace_events_inject.c:20:22: warning: variable buffer set but not used [-Wunused-but-set-variable]
It is never used, so remove it.
Link: http://lkml.kernel.org/r/20191207034409.25668-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When pulling in Divya Indi's patch, I made a minor fix to remove unneeded
braces. I commited my fix up via "git commit -a --amend". Unfortunately, I
didn't realize I had some changes I was testing in the module code, and
those changes were applied to Divya's patch as well.
This reverts the accidental updates to the module code.
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Divya Indi <divya.indi@oracle.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Fixes: e585e6469d ("tracing: Verify if trace array exists before destroying it.")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This commit switches from static structure to dynamic allocation
for rcu_fwds as another step towards providing multiple call_rcu()
forward-progress kthreads.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit threads pointers to rcu_fwd structures through the remaining
functions using rcu_fwds directly, namely rcu_torture_fwd_prog_cbfree(),
rcutorture_oom_notify() and rcu_torture_fwd_prog_init().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In order to add multiple call_rcu() forward-progress kthreads, it will
be necessary to dynamically allocate and initialize. This commit
therefore moves the initialization from compile time to instead
immediately precede thread-creation time.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In order to add multiple kthreads, it will be necessary to allow
the various functions to operate on a pointer to their kthread's
rcu_fwd structure. This commit therefore starts the process of
adding the needed "struct rcu_fwd" parameters and arguments to the
various callback forward-progress functions.
Note that rcutorture_oom_notify() and rcu_torture_fwd_cb_hist() will
eventually need to iterate over all kthreads' rcu_fwd structures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that RCU behaves reasonably well with the current single-kthread
call_rcu() forward-progress testing, it is time to add more kthreads.
This commit takes a first step towards that goal by wrapping what
will be the per-kthread data into a new rcu_fwd structure.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The config option `CONFIG_PREEMPT' is used for the preemption model
"Low-Latency Desktop". The config option `CONFIG_PREEMPTION' is enabled
when kernel preemption is enabled which is true for the preemption model
`CONFIG_PREEMPT' and `CONFIG_PREEMPT_RT'.
Use `CONFIG_PREEMPTION' if it applies to both preemption models and not
just to `CONFIG_PREEMPT'.
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: rcu@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently PREEMPT_RCU and TREE_RCU are mutually exclusive Kconfig
options. But PREEMPT_RCU actually specifies a kind of TREE_RCU,
namely a preemptible TREE_RCU. This commit therefore makes PREEMPT_RCU
be a modifer to the TREE_RCU Kconfig option. This has the benefit of
simplifying several of the #if expressions that formerly needed to
check both, but now need only check one or the other.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_preempt_check_blocked_tasks() function has a comment
that states that the rcu_node structure's ->lock must be held,
which might be informative, but which carries little weight if
not read. This commit therefore removes this comment in favor of
raw_lockdep_assert_held_rcu_node(), which will complain quite
visibly if the required lock is not held.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_gp_fqs_check_wake() function uses rcu_preempt_blocked_readers_cgp()
to read ->gp_tasks while other cpus might overwrite this field.
We need READ_ONCE()/WRITE_ONCE() pairs to avoid compiler
tricks and KCSAN splats like the following :
BUG: KCSAN: data-race in rcu_gp_fqs_check_wake / rcu_preempt_deferred_qs_irqrestore
write to 0xffffffff85a7f190 of 8 bytes by task 7317 on cpu 0:
rcu_preempt_deferred_qs_irqrestore+0x43d/0x580 kernel/rcu/tree_plugin.h:507
rcu_read_unlock_special+0xec/0x370 kernel/rcu/tree_plugin.h:659
__rcu_read_unlock+0xcf/0xe0 kernel/rcu/tree_plugin.h:394
rcu_read_unlock include/linux/rcupdate.h:645 [inline]
__ip_queue_xmit+0x3b0/0xa40 net/ipv4/ip_output.c:533
ip_queue_xmit+0x45/0x60 include/net/ip.h:236
__tcp_transmit_skb+0xdeb/0x1cd0 net/ipv4/tcp_output.c:1158
__tcp_send_ack+0x246/0x300 net/ipv4/tcp_output.c:3685
tcp_send_ack+0x34/0x40 net/ipv4/tcp_output.c:3691
tcp_cleanup_rbuf+0x130/0x360 net/ipv4/tcp.c:1575
tcp_recvmsg+0x633/0x1a30 net/ipv4/tcp.c:2179
inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838
sock_recvmsg_nosec net/socket.c:871 [inline]
sock_recvmsg net/socket.c:889 [inline]
sock_recvmsg+0x92/0xb0 net/socket.c:885
sock_read_iter+0x15f/0x1e0 net/socket.c:967
call_read_iter include/linux/fs.h:1864 [inline]
new_sync_read+0x389/0x4f0 fs/read_write.c:414
read to 0xffffffff85a7f190 of 8 bytes by task 10 on cpu 1:
rcu_gp_fqs_check_wake kernel/rcu/tree.c:1556 [inline]
rcu_gp_fqs_check_wake+0x93/0xd0 kernel/rcu/tree.c:1546
rcu_gp_fqs_loop+0x36c/0x580 kernel/rcu/tree.c:1611
rcu_gp_kthread+0x143/0x220 kernel/rcu/tree.c:1768
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 10 Comm: rcu_preempt Not tainted 5.3.0+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
[ paulmck: Added another READ_ONCE() for RCU CPU stall warnings. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 18cd8c93e6 ("rcu/nocb: Print gp/cb kthread hierarchy if
dump_tree") added print statements to rcu_organize_nocb_kthreads for
debugging, but incorrectly guarded them, causing the function to always
spew out its message.
This patch fixes it by guarding both pr_alert statements with dump_tree,
while also changing the second pr_alert to a pr_cont, to print the
hierarchy in a single line (assuming that's how it was supposed to
work).
Fixes: 18cd8c93e6 ("rcu/nocb: Print gp/cb kthread hierarchy if dump_tree")
Signed-off-by: Stefan Reiter <stefan@pimaker.at>
[ paulmck: Make single-nocbs-CPU GP kthreads look less erroneous. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
An expedited grace period can be stalled by a nohz_full CPU looping
in kernel context. This possibility is currently handled by some
carefully crafted checks in rcu_read_unlock_special() that enlist help
from ksoftirqd when permitted by the scheduler. However, it is exactly
these checks that require the scheduler avoid holding any of its rq or
pi locks across rcu_read_unlock() without also having held them across
the entire RCU read-side critical section.
It would therefore be very nice if expedited grace periods could
handle nohz_full CPUs looping in kernel context without such checks.
This commit therefore adds code to the expedited grace period's wait
and cleanup code that forces the scheduler-clock interrupt on for CPUs
that fail to quickly supply a quiescent state. "Quickly" is currently
a hard-coded single-jiffy delay.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
After RCU flavor consolidation, synchronize_sched_expedited_wait() does
both RCU-preempt and RCU-sched, whichever happens to have been built into
the running kernel. This commit therefore changes this function's name
to synchronize_rcu_expedited_wait() to reflect its new generic nature.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The function-header comments in kernel/rcu/tree_exp.h have gotten a bit
out of date, so this commit updates a number of them.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that the RCU flavors have been consolidated, there is one common
function for checking to see if an expedited RCU grace period has
completed, namely sync_rcu_preempt_exp_done(). Because this function is
no longer specific to RCU-preempt, this commit removes the "_preempt" from
its name. This commit also changes sync_rcu_preempt_exp_done_unlocked()
to sync_rcu_exp_done_unlocked() for the same reason.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The current expedited RCU grace-period code expects that a task
requesting an expedited grace period cannot awaken until that grace
period has reached the wakeup phase. However, it is possible for a long
preemption to result in the waiting task never sleeping. For example,
consider the following sequence of events:
1. Task A starts an expedited grace period by invoking
synchronize_rcu_expedited(). It proceeds normally up to the
wait_event() near the end of that function, and is then preempted
(or interrupted or whatever).
2. The expedited grace period completes, and a kworker task starts
the awaken phase, having incremented the counter and acquired
the rcu_state structure's .exp_wake_mutex. This kworker task
is then preempted or interrupted or whatever.
3. Task A resumes and enters wait_event(), which notes that the
expedited grace period has completed, and thus doesn't sleep.
4. Task B starts an expedited grace period exactly as did Task A,
complete with the preemption (or whatever delay) just before
the call to wait_event().
5. The expedited grace period completes, and another kworker
task starts the awaken phase, having incremented the counter.
However, it blocks when attempting to acquire the rcu_state
structure's .exp_wake_mutex because step 2's kworker task has
not yet released it.
6. Steps 4 and 5 repeat, resulting in overflow of the rcu_node
structure's ->exp_wq[] array.
In theory, this is harmless. Tasks waiting on the various ->exp_wq[]
array will just be spuriously awakened, but they will just sleep again
on noting that the rcu_state structure's ->expedited_sequence value has
not advanced far enough.
In practice, this wastes CPU time and is an accident waiting to happen.
This commit therefore moves the rcu_exp_gp_seq_end() call that officially
ends the expedited grace period (along with associate tracing) until
after the ->exp_wake_mutex has been acquired. This prevents Task A from
awakening prematurely, thus preventing more than one expedited grace
period from being in flight during a previous expedited grace period's
wakeup phase.
Fixes: 3b5f668e71 ("rcu: Overlap wakeups with next expedited grace period")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
[ paulmck: Added updated comment. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tasks waiting within exp_funnel_lock() for an expedited grace period to
elapse can be starved due to the following sequence of events:
1. Tasks A and B both attempt to start an expedited grace
period at about the same time. This grace period will have
completed when the lower four bits of the rcu_state structure's
->expedited_sequence field are 0b'0100', for example, when the
initial value of this counter is zero. Task A wins, and thus
does the actual work of starting the grace period, including
acquiring the rcu_state structure's .exp_mutex and sets the
counter to 0b'0001'.
2. Because task B lost the race to start the grace period, it
waits on ->expedited_sequence to reach 0b'0100' inside of
exp_funnel_lock(). This task therefore blocks on the rcu_node
structure's ->exp_wq[1] field, keeping in mind that the
end-of-grace-period value of ->expedited_sequence (0b'0100')
is shifted down two bits before indexing the ->exp_wq[] field.
3. Task C attempts to start another expedited grace period,
but blocks on ->exp_mutex, which is still held by Task A.
4. The aforementioned expedited grace period completes, so that
->expedited_sequence now has the value 0b'0100'. A kworker task
therefore acquires the rcu_state structure's ->exp_wake_mutex
and starts awakening any tasks waiting for this grace period.
5. One of the first tasks awakened happens to be Task A. Task A
therefore releases the rcu_state structure's ->exp_mutex,
which allows Task C to start the next expedited grace period,
which causes the lower four bits of the rcu_state structure's
->expedited_sequence field to become 0b'0101'.
6. Task C's expedited grace period completes, so that the lower four
bits of the rcu_state structure's ->expedited_sequence field now
become 0b'1000'.
7. The kworker task from step 4 above continues its wakeups.
Unfortunately, the wake_up_all() refetches the rcu_state
structure's .expedited_sequence field:
wake_up_all(&rnp->exp_wq[rcu_seq_ctr(rcu_state.expedited_sequence) & 0x3]);
This results in the wakeup being applied to the rcu_node
structure's ->exp_wq[2] field, which is unfortunate given that
Task B is instead waiting on ->exp_wq[1].
On a busy system, no harm is done (or at least no permanent harm is done).
Some later expedited grace period will redo the wakeup. But on a quiet
system, such as many embedded systems, it might be a good long time before
there was another expedited grace period. On such embedded systems,
this situation could therefore result in a system hang.
This issue manifested as DPM device timeout during suspend (which
usually qualifies as a quiet time) due to a SCSI device being stuck in
_synchronize_rcu_expedited(), with the following stack trace:
schedule()
synchronize_rcu_expedited()
synchronize_rcu()
scsi_device_quiesce()
scsi_bus_suspend()
dpm_run_callback()
__device_suspend()
This commit therefore prevents such delays, timeouts, and hangs by
making rcu_exp_wait_wake() use its "s" argument consistently instead of
refetching from rcu_state.expedited_sequence.
Fixes: 3b5f668e71 ("rcu: Overlap wakeups with next expedited grace period")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The code in sync_rcu_exp_select_node_cpus() calculates the current
CPU's mask within its rcu_node structure's bitmasks, but this has
already been computed in the ->grpmask field of that CPU's rcu_data
structure. This commit therefore just uses this ->grpmask field.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This fixes a data-race where `atomic_t dynticks` is copied by value. The
copy is performed non-atomically, resulting in a data-race if `dynticks`
is updated concurrently.
This data-race was found with KCSAN:
==================================================================
BUG: KCSAN: data-race in dyntick_save_progress_counter / rcu_irq_enter
write to 0xffff989dbdbe98e0 of 4 bytes by task 10 on cpu 3:
atomic_add_return include/asm-generic/atomic-instrumented.h:78 [inline]
rcu_dynticks_snap kernel/rcu/tree.c:310 [inline]
dyntick_save_progress_counter+0x43/0x1b0 kernel/rcu/tree.c:984
force_qs_rnp+0x183/0x200 kernel/rcu/tree.c:2286
rcu_gp_fqs kernel/rcu/tree.c:1601 [inline]
rcu_gp_fqs_loop+0x71/0x880 kernel/rcu/tree.c:1653
rcu_gp_kthread+0x22c/0x3b0 kernel/rcu/tree.c:1799
kthread+0x1b5/0x200 kernel/kthread.c:255
<snip>
read to 0xffff989dbdbe98e0 of 4 bytes by task 154 on cpu 7:
rcu_nmi_enter_common kernel/rcu/tree.c:828 [inline]
rcu_irq_enter+0xda/0x240 kernel/rcu/tree.c:870
irq_enter+0x5/0x50 kernel/softirq.c:347
<snip>
Reported by Kernel Concurrency Sanitizer on:
CPU: 7 PID: 154 Comm: kworker/7:1H Not tainted 5.3.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: kblockd blk_mq_run_work_fn
==================================================================
Signed-off-by: Marco Elver <elver@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: rcu@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The "mask_ofl_ipi" is used to track which CPUs get IPIed, however
in the IPI sending loop, "mask_ofl_ipi" along with another variable
"mask_ofl_test" might also get modified to record which CPUs' quiesent
states must be reported by the sync_rcu_exp_select_node_cpus() at
the end of sync_rcu_exp_select_node_cpus(). This overlap of roles
can be confusing, so this patch cleans things a little by using
"mask_ofl_ipi" solely for determining which CPUs must be IPIed and
"mask_ofl_test" for solely determining on behalf of which CPUs
sync_rcu_exp_select_node_cpus() must report a quiscent state.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Marco Elver <elver@google.com>
The rcu_node structure's ->expmask field is accessed locklessly when
starting a new expedited grace period and when reporting an expedited
RCU CPU stall warning. This commit therefore handles the former by
taking a snapshot of ->expmask while the lock is held and the latter
by applying READ_ONCE() to lockless reads and WRITE_ONCE() to the
corresponding updates.
Link: https://lore.kernel.org/lkml/CANpmjNNmSOagbTpffHr4=Yedckx9Rm2NuGqC9UqE+AOz5f1-ZQ@mail.gmail.com
Reported-by: syzbot+134336b86f728d6e55a0@syzkaller.appspotmail.com
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Marco Elver <elver@google.com>
Add __rcu annotation to RCU-protected global pointer auditd_conn.
auditd_conn is an RCU-protected global pointer,i.e., accessed
via RCU methods rcu_dereference() and rcu_assign_pointer(),
hence it must be annotated with __rcu for sparse to report
warnings/errors correctly.
Fix multiple instances of the sparse error:
error: incompatible types in comparison expression
(different address spaces)
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
[PM: tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=d5HL
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.5-pr-warning-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull pr_warning() removal from Petr Mladek.
- Final removal of the unused pr_warning() alias.
You're supposed to use just "pr_warn()" in the kernel.
* tag 'printk-for-5.5-pr-warning-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
checkpatch: Drop pr_warning check
printk: Drop pr_warning definition
Fix up for "printk: Drop pr_warning definition"
workqueue: Use pr_warn instead of pr_warning
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().
This patch is generated using following script:
EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"
git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do
if [[ "$file" =~ $EXCLUDE_FILES ]]; then
continue
fi
sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
While running kprobe module test, find_module_all() caused
a suspicious RCU usage warning.
-----
=============================
WARNING: suspicious RCU usage
5.4.0-next-20191202+ #63 Not tainted
-----------------------------
kernel/module.c:619 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by rmmod/642:
#0: ffffffff8227da80 (module_mutex){+.+.}, at: __x64_sys_delete_module+0x9a/0x230
stack backtrace:
CPU: 0 PID: 642 Comm: rmmod Not tainted 5.4.0-next-20191202+ #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x71/0xa0
find_module_all+0xc1/0xd0
__x64_sys_delete_module+0xac/0x230
? do_syscall_64+0x12/0x1f0
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4b6d49
-----
This is because list_for_each_entry_rcu(modules) is called
without rcu_read_lock(). This is safe because the module_mutex
is locked.
Pass lockdep_is_held(&module_mutex) to the list_for_each_entry_rcu()
to suppress this warning, This also fixes similar issue in
mod_find() and each_symbol_section().
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
ns_get_path() and ns_get_path_cb() only ever return either NULL or an
ERR_PTR. It is far more idiomatic to simply return an integer, and it
makes all of the callers of ns_get_path() more straightforward to read.
Fixes: e149ed2b80 ("take the targets of /proc/*/ns/* symlinks to separate fs")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull networking fixes from David Miller:
1) More jumbo frame fixes in r8169, from Heiner Kallweit.
2) Fix bpf build in minimal configuration, from Alexei Starovoitov.
3) Use after free in slcan driver, from Jouni Hogander.
4) Flower classifier port ranges don't work properly in the HW offload
case, from Yoshiki Komachi.
5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.
6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.
7) Fix flow dissection in dsa TX path, from Alexander Lobakin.
8) Stale syncookie timestampe fixes from Guillaume Nault.
[ Did an evil merge to silence a warning introduced by this pull - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
r8169: fix rtl_hw_jumbo_disable for RTL8168evl
net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
r8169: add missing RX enabling for WoL on RTL8125
vhost/vsock: accept only packets with the right dst_cid
net: phy: dp83867: fix hfs boot in rgmii mode
net: ethernet: ti: cpsw: fix extra rx interrupt
inet: protect against too small mtu values.
gre: refetch erspan header from skb->data after pskb_may_pull()
pppoe: remove redundant BUG_ON() check in pppoe_pernet
tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
tcp: tighten acceptance of ACKs not matching a child socket
tcp: fix rejected syncookies due to stale timestamps
lpc_eth: kernel BUG on remove
tcp: md5: fix potential overestimation of TCP option space
net: sched: allow indirect blocks to bind to clsact in TC
net: core: rename indirect block ingress cb function
net-sysfs: Call dev_hold always in netdev_queue_add_kobject
net: dsa: fix flow dissection on Tx path
net/tls: Fix return values to avoid ENOTSUPP
net: avoid an indirect call in ____sys_recvmsg()
...
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Update the comment to use PREEMPTION because it is true for both
preemption models.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20191015191821.11479-35-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Switch the Kconfig dependency to use CONFIG_PREEMPTION.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20191015191821.11479-32-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/20191206092503.303d6a57@canb.auug.org.au
Cc: Linux Next Mailing List <linux-next@vger.kernel.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Summary of modules changes for the 5.5 merge window:
- Refactor include/linux/export.h and remove code duplication between
EXPORT_SYMBOL and EXPORT_SYMBOL_NS to make it more readable. The most
notable change is that no namespace is represented by an empty string ""
rather than NULL.
- Fix a module load/unload race where waiter(s) trying to load the same
module weren't being woken up when a module finally goes away.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XDci
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"Summary of modules changes for the 5.5 merge window:
- Refactor include/linux/export.h and remove code duplication between
EXPORT_SYMBOL and EXPORT_SYMBOL_NS to make it more readable.
The most notable change is that no namespace is represented by an
empty string "" rather than NULL.
- Fix a module load/unload race where waiter(s) trying to load the
same module weren't being woken up when a module finally goes away"
* tag 'modules-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
kernel/module.c: wakeup processes in module_wq on module unload
moduleparam: fix parameter description mismatch
export: avoid code duplication in include/linux/export.h
Pull thermal management updates from Zhang Rui:
- Fix a deadlock regression in thermal core framework, which was
introduced in 5.3 (Wei Wang)
- Initialize thermal control framework earlier to enable thermal
mitigation during boot (Amit Kucheria)
- Convert the Intelligent Power Allocator (IPA) thermal governor to
follow the generic PM_EM instead of its own Energy Model (Quentin
Perret)
- Introduce a new Amlogic soc thermal driver (Guillaume La Roque)
- Add interrupt support for tsens thermal driver (Amit Kucheria)
- Add support for MSM8956/8976 in tsens thermal driver
(AngeloGioacchino Del Regno)
- Add support for r8a774b1 in rcar thermal driver (Biju Das)
- Add support for Thermal Monitor Unit v2 in qoriq thermal driver
(Yuantian Tang)
- Some other fixes/cleanups on thermal core framework and soc thermal
drivers (Colin Ian King, Daniel Lezcano, Hsin-Yi Wang, Tian Tao)
* 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (32 commits)
thermal: Fix deadlock in thermal thermal_zone_device_check
thermal: cpu_cooling: Migrate to using the EM framework
thermal: cpu_cooling: Make the power-related code depend on IPA
PM / EM: Declare EM data types unconditionally
arm64: defconfig: Enable CONFIG_ENERGY_MODEL
drivers: thermal: tsens: fix potential integer overflow on multiply
thermal: cpu_cooling: Reorder the header file
thermal: cpu_cooling: Remove pointless dependency on CONFIG_OF
thermal: no need to set .owner when using module_platform_driver
thermal: qcom: tsens-v1: Fix kfree of a non-pointer value
cpufreq: qcom-hw: Move driver initialization earlier
clk: qcom: Initialize clock drivers earlier
cpufreq: Initialize cpufreq-dt driver earlier
cpufreq: Initialize the governors in core_initcall
thermal: Initialize thermal subsystem earlier
thermal: Remove netlink support
dt: thermal: tsens: Document compatible for MSM8976/56
thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976
MAINTAINERS: add entry for Amlogic Thermal driver
thermal: amlogic: Add thermal driver to support G12 SoCs
...
Merge more updates from Andrew Morton:
"Most of the rest of MM and various other things. Some Kconfig rework
still awaits merges of dependent trees from linux-next.
Subsystems affected by this patch series: mm/hotfixes, mm/memcg,
mm/vmstat, mm/thp, procfs, sysctl, misc, notifiers, core-kernel,
bitops, lib, checkpatch, epoll, binfmt, init, rapidio, uaccess, kcov,
ubsan, ipc, bitmap, mm/pagemap"
* akpm: (86 commits)
mm: remove __ARCH_HAS_4LEVEL_HACK and include/asm-generic/4level-fixup.h
um: add support for folded p4d page tables
um: remove unused pxx_offset_proc() and addr_pte() functions
sparc32: use pgtable-nopud instead of 4level-fixup
parisc/hugetlb: use pgtable-nopXd instead of 4level-fixup
parisc: use pgtable-nopXd instead of 4level-fixup
nds32: use pgtable-nopmd instead of 4level-fixup
microblaze: use pgtable-nopmd instead of 4level-fixup
m68k: mm: use pgtable-nopXd instead of 4level-fixup
m68k: nommu: use pgtable-nopud instead of 4level-fixup
c6x: use pgtable-nopud instead of 4level-fixup
arm: nommu: use pgtable-nopud instead of 4level-fixup
alpha: use pgtable-nopud instead of 4level-fixup
gpio: pca953x: tighten up indentation
gpio: pca953x: convert to use bitmap API
gpio: pca953x: use input from regs structure in pca953x_irq_pending()
gpio: pca953x: remove redundant variable and check in IRQ handler
lib/bitmap: introduce bitmap_replace() helper
lib/test_bitmap: fix comment about this file
lib/test_bitmap: move exp1 and exp2 upper for others to use
...
For jited bpf program, if the subprogram count is 1, i.e.,
there is no callees in the program, prog->aux->func will be NULL
and prog->bpf_func points to image address of the program.
If there is more than one subprogram, prog->aux->func is populated,
and subprogram 0 can be accessed through either prog->bpf_func or
prog->aux->func[0]. Other subprograms should be accessed through
prog->aux->func[subprog_id].
This patch fixed a bug in check_attach_btf_id(), where
prog->aux->func[subprog_id] is used to access any subprogram which
caused a segfault like below:
[79162.619208] BUG: kernel NULL pointer dereference, address:
0000000000000000
......
[79162.634255] Call Trace:
[79162.634974] ? _cond_resched+0x15/0x30
[79162.635686] ? kmem_cache_alloc_trace+0x162/0x220
[79162.636398] ? selinux_bpf_prog_alloc+0x1f/0x60
[79162.637111] bpf_prog_load+0x3de/0x690
[79162.637809] __do_sys_bpf+0x105/0x1740
[79162.638488] do_syscall_64+0x5b/0x180
[79162.639147] entry_SYSCALL_64_after_hwframe+0x44/0xa9
......
Fixes: 5b92a28aae ("bpf: Support attaching tracing BPF program to other BPF programs")
Reported-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191205010606.177774-1-yhs@fb.com
Patch series " kcov: collect coverage from usb and vhost", v3.
This patchset extends kcov to allow collecting coverage from backgound
kernel threads. This extension requires custom annotations for each of
the places where coverage collection is desired. This patchset
implements this for hub events in the USB subsystem and for vhost
workers. See the first patch description for details about the kcov
extension. The other two patches apply this kcov extension to USB and
vhost.
Examples of other subsystems that might potentially benefit from this
when custom annotations are added (the list is based on
process_one_work() callers for bugs recently reported by syzbot):
1. fs: writeback wb_workfn() worker,
2. net: addrconf_dad_work()/addrconf_verify_work() workers,
3. net: neigh_periodic_work() worker,
4. net/p9: p9_write_work()/p9_read_work() workers,
5. block: blk_mq_run_work_fn() worker.
These patches have been used to enable coverage-guided USB fuzzing with
syzkaller for the last few years, see the details here:
https://github.com/google/syzkaller/blob/master/docs/linux/external_fuzzing_usb.md
This patchset has been pushed to the public Linux kernel Gerrit
instance:
https://linux-review.googlesource.com/c/linux/kernel/git/torvalds/linux/+/1524
This patch (of 3):
Add background thread coverage collection ability to kcov.
With KCOV_ENABLE coverage is collected only for syscalls that are issued
from the current process. With KCOV_REMOTE_ENABLE it's possible to
collect coverage for arbitrary parts of the kernel code, provided that
those parts are annotated with kcov_remote_start()/kcov_remote_stop().
This allows to collect coverage from two types of kernel background
threads: the global ones, that are spawned during kernel boot in a
limited number of instances (e.g. one USB hub_event() worker thread is
spawned per USB HCD); and the local ones, that are spawned when a user
interacts with some kernel interface (e.g. vhost workers).
To enable collecting coverage from a global background thread, a unique
global handle must be assigned and passed to the corresponding
kcov_remote_start() call. Then a userspace process can pass a list of
such handles to the KCOV_REMOTE_ENABLE ioctl in the handles array field
of the kcov_remote_arg struct. This will attach the used kcov device to
the code sections, that are referenced by those handles.
Since there might be many local background threads spawned from
different userspace processes, we can't use a single global handle per
annotation. Instead, the userspace process passes a non-zero handle
through the common_handle field of the kcov_remote_arg struct. This
common handle gets saved to the kcov_handle field in the current
task_struct and needs to be passed to the newly spawned threads via
custom annotations. Those threads should in turn be annotated with
kcov_remote_start()/kcov_remote_stop().
Internally kcov stores handles as u64 integers. The top byte of a
handle is used to denote the id of a subsystem that this handle belongs
to, and the lower 4 bytes are used to denote the id of a thread instance
within that subsystem. A reserved value 0 is used as a subsystem id for
common handles as they don't belong to a particular subsystem. The
bytes 4-7 are currently reserved and must be zero. In the future the
number of bytes used for the subsystem or handle ids might be increased.
When a particular userspace process collects coverage by via a common
handle, kcov will collect coverage for each code section that is
annotated to use the common handle obtained as kcov_handle from the
current task_struct. However non common handles allow to collect
coverage selectively from different subsystems.
Link: http://lkml.kernel.org/r/e90e315426a384207edbec1d6aa89e43008e4caf.1572366574.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Initialization is not guaranteed to zero padding bytes so use an
explicit memset instead to avoid leaking any kernel content in any
possible padding bytes.
Link: http://lkml.kernel.org/r/dfa331c00881d61c8ee51577a082d8bebd61805c.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When building with clang + -Wtautological-pointer-compare, these
instances pop up:
kernel/profile.c:339:6: warning: comparison of array 'prof_cpu_mask' not equal to a null pointer is always true [-Wtautological-pointer-compare]
if (prof_cpu_mask != NULL)
^~~~~~~~~~~~~ ~~~~
kernel/profile.c:376:6: warning: comparison of array 'prof_cpu_mask' not equal to a null pointer is always true [-Wtautological-pointer-compare]
if (prof_cpu_mask != NULL)
^~~~~~~~~~~~~ ~~~~
kernel/profile.c:406:26: warning: comparison of array 'prof_cpu_mask' not equal to a null pointer is always true [-Wtautological-pointer-compare]
if (!user_mode(regs) && prof_cpu_mask != NULL &&
^~~~~~~~~~~~~ ~~~~
3 warnings generated.
This can be addressed with the cpumask_available helper, introduced in
commit f7e30f01a9 ("cpumask: Add helper cpumask_available()") to fix
warnings like this while keeping the code the same.
Link: https://github.com/ClangBuiltLinux/linux/issues/747
Link: http://lkml.kernel.org/r/20191022191957.9554-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
blocking_notifier_chain_cond_register() does not consider system_booting
state, which is the only difference between this function and
blocking_notifier_cain_register(). This can be a bug and is a piece of
duplicate code.
Delete blocking_notifier_chain_cond_register()
Link: http://lkml.kernel.org/r/1568861888-34045-4-git-send-email-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only difference between notifier_chain_cond_register() and
notifier_chain_register() is the lack of warning hints for duplicate
registrations. Use notifier_chain_register() instead of
notifier_chain_cond_register() to avoid duplicate code
Link: http://lkml.kernel.org/r/1568861888-34045-3-git-send-email-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Registering the same notifier to a hook repeatedly can cause the hook
list to form a ring or lose other members of the list.
case1: An infinite loop in notifier_chain_register() can cause soft lockup
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_chain_register(&test_notifier_list, &test2);
case2: An infinite loop in notifier_chain_register() can cause soft lockup
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_call_chain(&test_notifier_list, 0, NULL);
case3: lose other hook test2
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_chain_register(&test_notifier_list, &test2);
atomic_notifier_chain_register(&test_notifier_list, &test1);
case4: Unregister returns 0, but the hook is still in the linked list,
and it is not really registered. If you call
notifier_call_chain after ko is unloaded, it will trigger oops.
If the system is configured with softlockup_panic and the same hook is
repeatedly registered on the panic_notifier_list, it will cause a loop
panic.
Add a check in notifier_chain_register(), intercepting duplicate
registrations to avoid infinite loops
Link: http://lkml.kernel.org/r/1568861888-34045-2-git-send-email-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes:
- Missing __print_hex_dump undef for processing new function in trace events
- Stop WARN_ON messages when lockdown disables tracing on boot up
Enhancement:
- Debug option to inject trace events from userspace (for rasdaemon)
The enhancement has its own config option and is non invasive. It's been
discussed for sever months and should have been added to my original
push, but I never pulled it into my queue.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXehlhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlGgAQCszcDuNyVllj0VwWi4i+0FAQcI12Ad
W0NGZm0wObGExwD8CDR/CdHq9ulizFQjJfopG6b5Uc3Z4NNJ+QGnMxzBuwo=
=k31z
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
"Two fixes and one patch that was missed:
Fixes:
- Missing __print_hex_dump undef for processing new function in trace
events
- Stop WARN_ON messages when lockdown disables tracing on boot up
Enhancement:
- Debug option to inject trace events from userspace (for rasdaemon)"
The enhancement has its own config option and is non invasive. It's been
discussed for sever months and should have been added to my original
push, but I never pulled it into my queue.
* tag 'trace-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not create directories if lockdown is in affect
tracing: Introduce trace event injection
tracing: Fix __print_hex_dump scope
- Avoid a race condition in the ACPI EC driver that may cause
systems to be unable to leave suspend-to-idle (Rafael Wysocki).
- Drop the "disabled" field, which is redundant, from struct
cpuidle_state (Rafael Wysocki).
- Reintroduce device PM QoS frequency constraints (temporarily
introduced and than dropped during the 5.4 cycle) in preparation
for adding QoS support to devfreq (Leonard Crestez).
- Clean up indentation (in multiple places) and the cpuidle drivers
help text in Kconfig (Krzysztof Kozlowski, Randy Dunlap).
-----BEGIN PGP SIGNATURE-----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=KAyd
-----END PGP SIGNATURE-----
Merge tag 'pm-5.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull additional power management updates from Rafael Wysocki:
"These fix an ACPI EC driver bug exposed by the recent rework of the
suspend-to-idle code flow, reintroduce frequency constraints into
device PM QoS (in preparation for adding QoS support to devfreq), drop
a redundant field from struct cpuidle_state and clean up Kconfig in
some places.
Specifics:
- Avoid a race condition in the ACPI EC driver that may cause systems
to be unable to leave suspend-to-idle (Rafael Wysocki)
- Drop the "disabled" field, which is redundant, from struct
cpuidle_state (Rafael Wysocki)
- Reintroduce device PM QoS frequency constraints (temporarily
introduced and than dropped during the 5.4 cycle) in preparation
for adding QoS support to devfreq (Leonard Crestez)
- Clean up indentation (in multiple places) and the cpuidle drivers
help text in Kconfig (Krzysztof Kozlowski, Randy Dunlap)"
* tag 'pm-5.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: s2idle: Rework ACPI events synchronization
ACPI: EC: Rework flushing of pending work
PM / devfreq: Add missing locking while setting suspend_freq
PM / QoS: Restore DEV_PM_QOS_MIN/MAX_FREQUENCY
PM / QoS: Reorder pm_qos/freq_qos/dev_pm_qos structs
PM / QoS: Initial kunit test
PM / QoS: Redefine FREQ_QOS_MAX_DEFAULT_VALUE to S32_MAX
power: avs: Fix Kconfig indentation
cpufreq: Fix Kconfig indentation
cpuidle: minor Kconfig help text fixes
cpuidle: Drop disabled field from struct cpuidle_state
cpuidle: Fix Kconfig indentation
When assiging and testing taskstats in taskstats_exit() there's a race
when setting up and reading sig->stats when a thread-group with more
than one thread exits:
write to 0xffff8881157bbe10 of 8 bytes by task 7951 on cpu 0:
taskstats_tgid_alloc kernel/taskstats.c:567 [inline]
taskstats_exit+0x6b7/0x717 kernel/taskstats.c:596
do_exit+0x2c2/0x18e0 kernel/exit.c:864
do_group_exit+0xb4/0x1c0 kernel/exit.c:983
get_signal+0x2a2/0x1320 kernel/signal.c:2734
do_signal+0x3b/0xc00 arch/x86/kernel/signal.c:815
exit_to_usermode_loop+0x250/0x2c0 arch/x86/entry/common.c:159
prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
do_syscall_64+0x2d7/0x2f0 arch/x86/entry/common.c:299
entry_SYSCALL_64_after_hwframe+0x44/0xa9
read to 0xffff8881157bbe10 of 8 bytes by task 7949 on cpu 1:
taskstats_tgid_alloc kernel/taskstats.c:559 [inline]
taskstats_exit+0xb2/0x717 kernel/taskstats.c:596
do_exit+0x2c2/0x18e0 kernel/exit.c:864
do_group_exit+0xb4/0x1c0 kernel/exit.c:983
__do_sys_exit_group kernel/exit.c:994 [inline]
__se_sys_exit_group kernel/exit.c:992 [inline]
__x64_sys_exit_group+0x2e/0x30 kernel/exit.c:992
do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by using smp_load_acquire() and smp_store_release().
Reported-by: syzbot+c5d03165a1bd1dead0c1@syzkaller.appspotmail.com
Fixes: 34ec12349c ("taskstats: cleanup ->signal->stats allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Will Deacon <will@kernel.org>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20191009114809.8643-1-christian.brauner@ubuntu.com
If lockdown is disabling tracing on boot up, it prevents the tracing files
from even bering created. But when that happens, there's several places that
will give a warning that the files were not created as that is usually a
sign of a bug.
Add in strategic locations where a check is made to see if tracing is
disabled by lockdown, and if it is, do not go further, and fail silently
(but print that tracing is disabled by lockdown, without doing a WARN_ON()).
Cc: Matthew Garrett <mjg59@google.com>
Fixes: 17911ff38a ("tracing: Add locked_down checks to the open calls of files created for tracefs")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Pull timer updates from Ingo Molnar:
"The main changes in the timer code in this cycle were:
- Clockevent updates:
- timer-of framework cleanups. (Geert Uytterhoeven)
- Use timer-of for the renesas-ostm and the device name to prevent
name collision in case of multiple timers. (Geert Uytterhoeven)
- Check if there is an error after calling of_clk_get in asm9260
(Chuhong Yuan)
- ABI fix: Zero out high order bits of nanoseconds on compat
syscalls. This got broken a year ago, with apparently no side
effects so far.
Since the kernel would use random data otherwise I don't think we'd
have other options but to fix the bug, even if there was a side
effect to applications (Dmitry Safonov)
- Optimize ns_to_timespec64() on 32-bit systems: move away from
div_s64_rem() which can be slow, to div_u64_rem() which is faster
(Arnd Bergmann)
- Annotate KCSAN-reported false positive data races in
hrtimer_is_queued() users by moving timer->state handling over to
the READ_ONCE()/WRITE_ONCE() APIs. This documents these accesses
(Eric Dumazet)
- Misc cleanups and small fixes"
[ I undid the "ABI fix" and updated the comments instead. The reason
there were apparently no side effects is that the fix was a no-op.
The updated comment is to say _why_ it was a no-op. - Linus ]
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Zero the upper 32-bits in __kernel_timespec on 32-bit
time: Rename tsk->real_start_time to ->start_boottime
hrtimer: Remove the comment about not used HRTIMER_SOFTIRQ
time: Fix spelling mistake in comment
time: Optimize ns_to_timespec64()
hrtimer: Annotate lockless access to timer->state
clocksource/drivers/asm9260: Add a check for of_clk_get
clocksource/drivers/renesas-ostm: Use unique device name instead of ostm
clocksource/drivers/renesas-ostm: Convert to timer_of
clocksource/drivers/timer-of: Use unique device name instead of timer
clocksource/drivers/timer-of: Convert last full_name to %pOF
Pull irq updates from Ingo Molnar:
"Most of the IRQ subsystem changes in this cycle were irq-chip driver
updates:
- Qualcomm PDC wakeup interrupt support
- Layerscape external IRQ support
- Broadcom bcm7038 PM and wakeup support
- Ingenic driver cleanup and modernization
- GICv3 ITS preparation for GICv4.1 updates
- GICv4 fixes
There's also the series from Frederic Weisbecker that fixes memory
ordering bugs for the irq-work logic, whose primary fix is to turn
work->irq_work.flags into an atomic variable and then convert the
complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a
much simpler atomic_fetch_or() call.
There are also various smaller cleanups"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs
pinctrl/msm: Setup GPIO chip in hierarchy
irqchip/qcom-pdc: Add irqchip set/get state calls
irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs
irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask
irqchip/qcom-pdc: Update max PDC interrupts
of/irq: Document properties for wakeup interrupt parent
genirq: Introduce irq_chip_get/set_parent_state calls
irqdomain: Add bus token DOMAIN_BUS_WAKEUP
genirq: Fix function documentation of __irq_alloc_descs()
irq_work: Fix IRQ_WORK_BUSY bit clearing
irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))
irq_work: Slightly simplify IRQ_WORK_PENDING clearing
irq_work: Fix irq_work_claim() memory ordering
irq_work: Convert flags to atomic_t
irqchip: Ingenic: Add process for more than one irq at the same time.
irqchip: ingenic: Alloc generic chips from IRQ domain
irqchip: ingenic: Get virq number from IRQ domain
irqchip: ingenic: Error out if IRQ domain creation failed
irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions
...
- remove unneeded asm headers from hexagon, ia64
- add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving
- add 'helpnewconfig' target, which shows help for new CONFIG options
- support 'make nsdeps' for external modules
- make rebuilds faster by deleting $(wildcard $^) checks
- remove compile tests for kernel-space headers
- refactor modpost to simplify modversion handling
- make single target builds faster
- optimize and clean up scripts/kallsyms.c
- refactor various Makefiles and scripts
-----BEGIN PGP SIGNATURE-----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=zUaB
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- remove unneeded asm headers from hexagon, ia64
- add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving
- add 'helpnewconfig' target, which shows help for new CONFIG options
- support 'make nsdeps' for external modules
- make rebuilds faster by deleting $(wildcard $^) checks
- remove compile tests for kernel-space headers
- refactor modpost to simplify modversion handling
- make single target builds faster
- optimize and clean up scripts/kallsyms.c
- refactor various Makefiles and scripts
* tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (59 commits)
MAINTAINERS: update Kbuild/Kconfig maintainer's email address
scripts/kallsyms: remove redundant initializers
scripts/kallsyms: put check_symbol_range() calls close together
scripts/kallsyms: make check_symbol_range() void function
scripts/kallsyms: move ignored symbol types to is_ignored_symbol()
scripts/kallsyms: move more patterns to the ignored_prefixes array
scripts/kallsyms: skip ignored symbols very early
scripts/kallsyms: add const qualifiers where possible
scripts/kallsyms: make find_token() return (unsigned char *)
scripts/kallsyms: replace prefix_underscores_count() with strspn()
scripts/kallsyms: add sym_name() to mitigate cast ugliness
scripts/kallsyms: remove unneeded length check for prefix matching
scripts/kallsyms: remove redundant is_arm_mapping_symbol()
scripts/kallsyms: set relative_base more effectively
scripts/kallsyms: shrink table before sorting it
scripts/kallsyms: fix definitely-lost memory leak
scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE
kbuild: make single target builds even faster
modpost: respect the previous export when 'exported twice' is warned
modpost: do not set ->preloaded for symbols from Module.symvers
...
Daniel Borkmann says:
====================
pull-request: bpf 2019-12-02
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 6 day(s) which contain
a total of 10 files changed, 60 insertions(+), 51 deletions(-).
The main changes are:
1) Fix vmlinux BTF generation for binutils pre v2.25, from Stanislav Fomichev.
2) Fix libbpf global variable relocation to take symbol's st_value offset
into account, from Andrii Nakryiko.
3) Fix libbpf build on powerpc where check_abi target fails due to different
readelf output format, from Aurelien Jarno.
4) Don't set BPF insns RO for the case when they are JITed in order to avoid
fragmenting the direct map, from Daniel Borkmann.
5) Fix static checker warning in btf_distill_func_proto() as well as a build
error due to empty enum when BPF is compiled out, from Alexei Starovoitov.
6) Fix up generation of bpf_helper_defs.h for perf, from Arnaldo Carvalho de Melo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We have been trying to use rasdaemon to monitor hardware errors like
correctable memory errors. rasdaemon uses trace events to monitor
various hardware errors. In order to test it, we have to inject some
hardware errors, unfortunately not all of them provide error
injections. MCE does provide a way to inject MCE errors, but errors
like PCI error and devlink error don't, it is not easy to add error
injection to each of them. Instead, it is relatively easier to just
allow users to inject trace events in a generic way so that all trace
events can be injected.
This patch introduces trace event injection, where a new 'inject' is
added to each tracepoint directory. Users could write into this file
with key=value pairs to specify the value of each fields of the trace
event, all unspecified fields are set to zero values by default.
For example, for the net/net_dev_queue tracepoint, we can inject:
INJECT=/sys/kernel/debug/tracing/events/net/net_dev_queue/inject
echo "" > $INJECT
echo "name='test'" > $INJECT
echo "name='test' len=1024" > $INJECT
cat /sys/kernel/debug/tracing/trace
...
<...>-614 [000] .... 36.571483: net_dev_queue: dev= skbaddr=00000000fbf338c2 len=0
<...>-614 [001] .... 136.588252: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=0
<...>-614 [001] .N.. 208.431878: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=1024
Triggers could be triggered as usual too:
echo "stacktrace if len == 1025" > /sys/kernel/debug/tracing/events/net/net_dev_queue/trigger
echo "len=1025" > $INJECT
cat /sys/kernel/debug/tracing/trace
...
bash-614 [000] .... 36.571483: net_dev_queue: dev= skbaddr=00000000fbf338c2 len=0
bash-614 [001] .... 136.588252: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=0
bash-614 [001] .N.. 208.431878: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=1024
bash-614 [001] .N.1 284.236349: <stack trace>
=> event_inject_write
=> vfs_write
=> ksys_write
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The only thing that can't be injected is string pointers as they
require constant string pointers, this can't be done at run time.
Link: http://lkml.kernel.org/r/20191130045218.18979-1-xiyou.wangcong@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Merge updates from Andrew Morton:
"Incoming:
- a small number of updates to scripts/, ocfs2 and fs/buffer.c
- most of MM
I still have quite a lot of material (mostly not MM) staged after
linux-next due to -next dependencies. I'll send those across next week
as the preprequisites get merged up"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits)
mm/page_io.c: annotate refault stalls from swap_readpage
mm/Kconfig: fix trivial help text punctuation
mm/Kconfig: fix indentation
mm/memory_hotplug.c: remove __online_page_set_limits()
mm: fix typos in comments when calling __SetPageUptodate()
mm: fix struct member name in function comments
mm/shmem.c: cast the type of unmap_start to u64
mm: shmem: use proper gfp flags for shmem_writepage()
mm/shmem.c: make array 'values' static const, makes object smaller
userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK
fs/userfaultfd.c: wp: clear VM_UFFD_MISSING or VM_UFFD_WP during userfaultfd_register()
userfaultfd: wrap the common dst_vma check into an inlined function
userfaultfd: remove unnecessary WARN_ON() in __mcopy_atomic_hugetlb()
userfaultfd: use vma_pagesize for all huge page size calculation
mm/madvise.c: use PAGE_ALIGN[ED] for range checking
mm/madvise.c: replace with page_size() in madvise_inject_error()
mm/mmap.c: make vma_merge() comment more easy to understand
mm/hwpoison-inject: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
autonuma: reduce cache footprint when scanning page tables
autonuma: fix watermark checking in migrate_balanced_pgdat()
...
This is a series of cleanups for the y2038 work, mostly intended
for namespace cleaning: the kernel defines the traditional
time_t, timeval and timespec types that often lead to y2038-unsafe
code. Even though the unsafe usage is mostly gone from the kernel,
having the types and associated functions around means that we
can still grow new users, and that we may be missing conversions
to safe types that actually matter.
There are still a number of driver specific patches needed to
get the last users of these types removed, those have been
submitted to the respective maintainers.
Link: https://lore.kernel.org/lkml/20191108210236.1296047-1-arnd@arndb.de/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Bdbv
-----END PGP SIGNATURE-----
Merge tag 'y2038-cleanups-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground
Pull y2038 cleanups from Arnd Bergmann:
"y2038 syscall implementation cleanups
This is a series of cleanups for the y2038 work, mostly intended for
namespace cleaning: the kernel defines the traditional time_t, timeval
and timespec types that often lead to y2038-unsafe code. Even though
the unsafe usage is mostly gone from the kernel, having the types and
associated functions around means that we can still grow new users,
and that we may be missing conversions to safe types that actually
matter.
There are still a number of driver specific patches needed to get the
last users of these types removed, those have been submitted to the
respective maintainers"
Link: https://lore.kernel.org/lkml/20191108210236.1296047-1-arnd@arndb.de/
* tag 'y2038-cleanups-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (26 commits)
y2038: alarm: fix half-second cut-off
y2038: ipc: fix x32 ABI breakage
y2038: fix typo in powerpc vdso "LOPART"
y2038: allow disabling time32 system calls
y2038: itimer: change implementation to timespec64
y2038: move itimer reset into itimer.c
y2038: use compat_{get,set}_itimer on alpha
y2038: itimer: compat handling to itimer.c
y2038: time: avoid timespec usage in settimeofday()
y2038: timerfd: Use timespec64 internally
y2038: elfcore: Use __kernel_old_timeval for process times
y2038: make ns_to_compat_timeval use __kernel_old_timeval
y2038: socket: use __kernel_old_timespec instead of timespec
y2038: socket: remove timespec reference in timestamping
y2038: syscalls: change remaining timeval to __kernel_old_timeval
y2038: rusage: use __kernel_old_timeval
y2038: uapi: change __kernel_time_t to __kernel_old_time_t
y2038: stat: avoid 'time_t' in 'struct stat'
y2038: ipc: remove __kernel_time_t reference from headers
y2038: vdso: powerpc: avoid timespec references
...
Pull sysctl system call removal from Eric Biederman:
"As far as I can tell we have reached the point where no one enables
the sysctl system call anymore. It still is enabled in a few
defconfigs but they are mostly the rarely used one and in asking
people about that it was more cut & paste enabled than anything else.
This is single commit that just deletes code. Leaving just enough code
so that the deprecated sysctl warning continues to be printed. If my
analysis turns out to be wrong and someone actually cares it will be
easy to revert this commit and have the system call again.
There was one new xtensa defconfig in linux-next that enabled the
system call this cycle and when asked about it the maintainer of the
code replied that it was not enabled on purpose. As of today's
linux-next tree that defconfig no longer enables the system call.
What we saw in the review discussion was that if we go a step farther
than my patch and mess with uapi headers there are pieces of code that
won't compile, but nothing minds the system call actually disappearing
from the kernel"
Link: https://lore.kernel.org/lkml/201910011140.EA0181F13@keescook/
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sysctl: Remove the sysctl system call
Currently, the drop_caches proc file and sysctl read back the last value
written, suggesting this is somehow a stateful setting instead of a
one-time command. Make it write-only, like e.g. compact_memory.
While mitigating a VM problem at scale in our fleet, there was confusion
about whether writing to this file will permanently switch the kernel into
a non-caching mode. This influences the decision making in a tense
situation, where tens of people are trying to fix tens of thousands of
affected machines: Do we need a rollback strategy? What are the
performance implications of operating in a non-caching state for several
days? It also caused confusion when the kernel team said we may need to
write the file several times to make sure it's effective ("But it already
reads back 3?").
Link: http://lkml.kernel.org/r/20191031221602.9375-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Supporting VMAP_STACK with KASAN_VMALLOC is straightforward:
- clear the shadow region of vmapped stacks when swapping them in
- tweak Kconfig to allow VMAP_STACK to be turned on with KASAN
Link: http://lkml.kernel.org/r/20191031093909.9228-4-dja@axtens.net
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
get_unmapped_area() returns an address or -errno on failure. Historically
we have checked for the failure by offset_in_page() which is correct but
quite hard to read. Newer code started using IS_ERR_VALUE which is much
easier to read. Convert remaining users of offset_in_page as well.
[mhocko@suse.com: rewrite changelog]
[mhocko@kernel.org: fix mremap.c and uprobes.c sites also]
Link: http://lkml.kernel.org/r/20191012102512.28051-1-pugaowei@gmail.com
Signed-off-by: Gaowei Pu <pugaowei@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=fc7R
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20191126' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Audit is back for v5.5, albeit with only two patches:
- Allow for the auditing of suspicious O_CREAT usage via the new
AUDIT_ANOM_CREAT record.
- Remove a redundant if-conditional check found during code analysis.
It's a minor change, but when the pull request is only two patches
long, you need filler in the pull request email"
[ Heh on the pull request filler. I wish more people tried to write
better pull request messages, even if maybe it's not worth it for the
trivial cases ;^) - Linus ]
* tag 'audit-pr-20191126' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: remove redundant condition check in kauditd_thread()
audit: Report suspicious O_CREAT usage
The major change here is the work from Douglas Anderson that
reworks the way kdb stack traces are handled on SMP systems.
The effect is to allow all CPUs to issue their stack trace which
reduced the need for architecture specific code to support stack
tracing.
Also included are general of clean ups from Doug and myself:
* Remove some unused variables or arguments.
* Tidy up the kdb escape handling code and fix a couple of odd
corner cases.
- Better ignore escape characters that do not form part of an
escape sequence. This mostly benefits vi users since they are most
likely to press escape as a nervous habit but it won't harm anyone
else.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=CZKd
-----END PGP SIGNATURE-----
Merge tag 'kgdb-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"The major change here is the work from Douglas Anderson that reworks
the way kdb stack traces are handled on SMP systems. The effect is to
allow all CPUs to issue their stack trace which reduced the need for
architecture specific code to support stack tracing.
Also included are general of clean ups from Doug and myself:
- Remove some unused variables or arguments.
- Tidy up the kdb escape handling code and fix a couple of odd corner
cases.
- Better ignore escape characters that do not form part of an escape
sequence. This mostly benefits vi users since they are most likely
to press escape as a nervous habit but it won't harm anyone else"
* tag 'kgdb-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Tweak escape handling for vi users
kdb: Improve handling of characters from different input sources
kdb: Remove special case logic from kdb_read()
kdb: Simplify code to fetch characters from console
kdb: Tidy up code to handle escape sequences
kdb: Avoid array subscript warnings on non-SMP builds
kdb: Fix stack crawling on 'running' CPUs that aren't the master
kdb: Fix "btc <cpu>" crash if the CPU didn't round up
kdb: Remove unused "argcount" param from kdb_bt1(); make btaprompt bool
kgdb: Remove unused DCPU_SSTEP definition
Pull parisc updates from Helge Deller:
"Just trivial small updates: An assembler register optimization in the
inlined networking checksum functions, a compiler warning fix and
don't unneccesary print a runtime warning on machines which wouldn't
be affected anyway"
* 'parisc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Avoid spurious inequivalent alias kernel error messages
kexec: Fix pointer-to-int-cast warnings
parisc: Do not hardcode registers in checksum functions
-----BEGIN PGP SIGNATURE-----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=FKC7
-----END PGP SIGNATURE-----
Merge tag 'notifications-pipe-prep-20191115' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull pipe rework from David Howells:
"This is my set of preparatory patches for building a general
notification queue on top of pipes. It makes a number of significant
changes:
- It removes the nr_exclusive argument from __wake_up_sync_key() as
this is always 1. This prepares for the next step:
- Adds wake_up_interruptible_sync_poll_locked() so that poll can be
woken up from a function that's holding the poll waitqueue
spinlock.
- Change the pipe buffer ring to be managed in terms of unbounded
head and tail indices rather than bounded index and length. This
means that reading the pipe only needs to modify one index, not
two.
- A selection of helper functions are provided to query the state of
the pipe buffer, plus a couple to apply updates to the pipe
indices.
- The pipe ring is allowed to have kernel-reserved slots. This allows
many notification messages to be spliced in by the kernel without
allowing userspace to pin too many pages if it writes to the same
pipe.
- Advance the head and tail indices inside the pipe waitqueue lock
and use wake_up_interruptible_sync_poll_locked() to poke poll
without having to take the lock twice.
- Rearrange pipe_write() to preallocate the buffer it is going to
write into and then drop the spinlock. This allows kernel
notifications to then be added the ring whilst it is filling the
buffer it allocated. The read side is stalled because the pipe
mutex is still held.
- Don't wake up readers on a pipe if there was already data in it
when we added more.
- Don't wake up writers on a pipe if the ring wasn't full before we
removed a buffer"
* tag 'notifications-pipe-prep-20191115' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
pipe: Remove sync on wake_ups
pipe: Increase the writer-wakeup threshold to reduce context-switch count
pipe: Check for ring full inside of the spinlock in pipe_write()
pipe: Remove redundant wakeup from pipe_write()
pipe: Rearrange sequence in pipe_write() to preallocate slot
pipe: Conditionalise wakeup in pipe_read()
pipe: Advance tail pointer inside of wait spinlock in pipe_read()
pipe: Allow pipes to have kernel-reserved slots
pipe: Use head and tail pointers for the ring, not cursor and length
Add wake_up_interruptible_sync_poll_locked()
Remove the nr_exclusive argument from __wake_up_sync_key()
pipe: Reduce #inclusion of pipe_fs_i.h
This is another round of bug fixing and cleanup. This time the focus is on
the driver pattern to use mmu notifiers to monitor a VA range. This code
is lifted out of many drivers and hmm_mirror directly into the
mmu_notifier core and written using the best ideas from all the driver
implementations.
This removes many bugs from the drivers and has a very pleasing
diffstat. More drivers can still be converted, but that is for another
cycle.
- A shared branch with RDMA reworking the RDMA ODP implementation
- New mmu_interval_notifier API. This is focused on the use case of
monitoring a VA and simplifies the process for drivers
- A common seq-count locking scheme built into the mmu_interval_notifier
API usable by drivers that call get_user_pages() or hmm_range_fault()
with the VA range
- Conversion of mlx5 ODP, hfi1, radeon, nouveau, AMD GPU, and Xen GntDev
drivers to the new API. This deletes a lot of wonky driver code.
- Two improvements for hmm_range_fault(), from testing done by Ralph
-----BEGIN PGP SIGNATURE-----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=Hj8a
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This is another round of bug fixing and cleanup. This time the focus
is on the driver pattern to use mmu notifiers to monitor a VA range.
This code is lifted out of many drivers and hmm_mirror directly into
the mmu_notifier core and written using the best ideas from all the
driver implementations.
This removes many bugs from the drivers and has a very pleasing
diffstat. More drivers can still be converted, but that is for another
cycle.
- A shared branch with RDMA reworking the RDMA ODP implementation
- New mmu_interval_notifier API. This is focused on the use case of
monitoring a VA and simplifies the process for drivers
- A common seq-count locking scheme built into the
mmu_interval_notifier API usable by drivers that call
get_user_pages() or hmm_range_fault() with the VA range
- Conversion of mlx5 ODP, hfi1, radeon, nouveau, AMD GPU, and Xen
GntDev drivers to the new API. This deletes a lot of wonky driver
code.
- Two improvements for hmm_range_fault(), from testing done by Ralph"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
mm/hmm: remove hmm_range_dma_map and hmm_range_dma_unmap
mm/hmm: make full use of walk_page_range()
xen/gntdev: use mmu_interval_notifier_insert
mm/hmm: remove hmm_mirror and related
drm/amdgpu: Use mmu_interval_notifier instead of hmm_mirror
drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror
drm/amdgpu: Call find_vma under mmap_sem
nouveau: use mmu_interval_notifier instead of hmm_mirror
nouveau: use mmu_notifier directly for invalidate_range_start
drm/radeon: use mmu_interval_notifier_insert
RDMA/hfi1: Use mmu_interval_notifier_insert for user_exp_rcv
RDMA/odp: Use mmu_interval_notifier_insert()
mm/hmm: define the pre-processor related parts of hmm.h even if disabled
mm/hmm: allow hmm_range to be used with a mmu_interval_notifier or hmm_mirror
mm/mmu_notifier: add an interval tree notifier
mm/mmu_notifier: define the header pre-processor parts even if disabled
mm/hmm: allow snapshot of the special zero page
Support for adding per-device frequency limits was removed in
commit 2aac8bdf7a ("PM: QoS: Drop frequency QoS types from device PM QoS")
after cpufreq switched to use a new "freq_constraints" construct.
Restore support for per-device freq limits but base this upon
freq_constraints. This is primarily meant to be used by the devfreq
subsystem.
This removes the "static" marking on freq_qos_apply but does not export
it for modules.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
sched_clock_running is enabled early at bootup stage and never
disabled. So hint that to the compiler by using static_branch_likely()
rather than static_branch_unlikely().
The branch probability mis-annotation was introduced in the original
commit that converted the plain sched_clock_running flag to a static key:
46457ea464 ("sched/clock: Use static key for sched_clock_running")
Steve further notes:
| Looks like the confusion was the moving of the "!":
|
| - if (unlikely(!sched_clock_running))
| + if (!static_branch_unlikely(&sched_clock_running))
|
| Where, it was unlikely that !sched_clock_running would be true, but
| because the "!" was moved outside the "unlikely()" it makes the test
| "likely()". That is, if we added an intermediate step, it would have
| been:
|
| if (!likely(sched_clock_running))
|
| which would have prevented the mistake that this patch fixes.
[ mingo: Edited the changelog. ]
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: dietmar.eggemann@arm.com
Cc: juri.lelli@redhat.com
Cc: mgorman@suse.de
Cc: vincent.guittot@linaro.org
Link: https://lkml.kernel.org/r/1574843848-26825-1-git-send-email-zhenzhong.duan@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This fixes various data races in spinlock_debug. By testing with KCSAN,
it is observable that the console gets spammed with data races reports,
suggesting these are extremely frequent.
Example data race report:
read to 0xffff8ab24f403c48 of 4 bytes by task 221 on cpu 2:
debug_spin_lock_before kernel/locking/spinlock_debug.c:85 [inline]
do_raw_spin_lock+0x9b/0x210 kernel/locking/spinlock_debug.c:112
__raw_spin_lock include/linux/spinlock_api_smp.h:143 [inline]
_raw_spin_lock+0x39/0x40 kernel/locking/spinlock.c:151
spin_lock include/linux/spinlock.h:338 [inline]
get_partial_node.isra.0.part.0+0x32/0x2f0 mm/slub.c:1873
get_partial_node mm/slub.c:1870 [inline]
<snip>
write to 0xffff8ab24f403c48 of 4 bytes by task 167 on cpu 3:
debug_spin_unlock kernel/locking/spinlock_debug.c:103 [inline]
do_raw_spin_unlock+0xc9/0x1a0 kernel/locking/spinlock_debug.c:138
__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:159 [inline]
_raw_spin_unlock_irqrestore+0x2d/0x50 kernel/locking/spinlock.c:191
spin_unlock_irqrestore include/linux/spinlock.h:393 [inline]
free_debug_processing+0x1b3/0x210 mm/slub.c:1214
__slab_free+0x292/0x400 mm/slub.c:2864
<snip>
As a side-effect, with KCSAN, this eventually locks up the console, most
likely due to deadlock, e.g. .. -> printk lock -> spinlock_debug ->
KCSAN detects data race -> kcsan_print_report() -> printk lock ->
deadlock.
This fix will 1) avoid the data races, and 2) allow using lock debugging
together with KCSAN.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Marco Elver <elver@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20191120155715.28089-1-elver@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some kconfigs can have BPF enabled without a single valid program type.
In such configurations the build will fail with:
./kernel/bpf/btf.c:3466:1: error: empty enum is invalid
Fix it by adding unused value to the enum.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/bpf/20191128043508.2346723-1-ast@kernel.org
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using
DMA offsets (Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code
(Nicolas Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl3f+eULHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYPyPg/+PVHCrhmepudQQFHu6wfurE5U77iNnoUifvG+b5z5
5mHmTMkQwyox6rKDe8NuFApAhz1VJDSUgSelPmvTSOIEIGXCvX1p+GqRSVS5YQON
aLzGvbWKE8hCpaPdDHKYDauD1FZGMM8L2P5oOMF9X9fQ94xxRqfqJM6c8iD16Sgg
+aOgPNzTnxQHJFF/Dbt/mjJrKXWI+XF+bgUbH+l9yKa7Dd7ibmJR8yl9hs1jmp0H
1CZ+CizwnAs57rCd1a6Ybc6gj59tySc03NMnnbTko+KDxrcbD3Ee2tpqHVkkCjYz
Yl0m4FIpbotrpokL/FIS727bVvkjbWgoeM+kiVPoYzmZea3pq/tFDr6tp/BxDhFj
TZXSFfgQljlYMD3ppSoklFlfjGriVWV0tPO3arPXwuuMF5EX/IMQmvxei05jpc8n
iELNXOP9iZZkY4tLHy2hn2uWrxBRrS1WQwlLg9hahlNRzyfFSyHeP0zWlVDt+RgF
5CCbEI+HQcUqg1FApB30lQNWTn1+dJftrpKVBlgNBIyIa/z2rFbt8GdSnItxjfQX
/XX8EZbFvF6AcXkgURkYFIoKM/EbYShOSLcYA3PTUtcuTnF6Kk5eimySiGWZTVCS
prruSFDZJOvL3SnOIMIiYVmBdB7lEbDyLI/VYuhoECXEDCJpVmRktNkJNg4q6/E+
fjQ=
=e5wO
-----END PGP SIGNATURE-----
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using DMA offsets
(Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:
* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
dma-mapping: treat dev->bus_dma_mask as a DMA limit
dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
dma-direct: don't check swiotlb=force in dma_direct_map_resource
dma-debug: clean up put_hash_bucket()
powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
dma-direct: avoid a forward declaration for phys_to_dma
dma-direct: unify the dma_capable definitions
dma-mapping: drop the dev argument to arch_sync_dma_for_*
x86/PCI: sta2x11: use default DMA address translation
dma-direct: check for overflows on 32 bit DMA addresses
dma-debug: increase HASH_SIZE
dma-debug: reorder struct dma_debug_entry fields
xtensa: use the generic uncached segment support
dma-mapping: merge the generic remapping helpers into dma-direct
dma-direct: provide mmap and get_sgtable method overrides
dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
dma-direct: remove __dma_direct_free_pages
usb: core: Remove redundant vmap checks
kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
dma-debug: add a schedule point in debug_dma_dump_mappings()
...
- PERAMAENT flag to ftrace_ops when attaching a callback to a function
As /proc/sys/kernel/ftrace_enabled when set to zero will disable all
attached callbacks in ftrace, this has a detrimental impact on live
kernel tracing, as it disables all that it patched. If a ftrace_ops
is registered to ftrace with the PERMANENT flag set, it will prevent
ftrace_enabled from being disabled, and if ftrace_enabled is already
disabled, it will prevent a ftrace_ops with PREMANENT flag set from
being registered.
- New register_ftrace_direct(). As eBPF would like to register its own
trampolines to be called by the ftrace nop locations directly,
without going through the ftrace trampoline, this function has been
added. This allows for eBPF trampolines to live along side of
ftrace, perf, kprobe and live patching. It also utilizes the ftrace
enabled_functions file that keeps track of functions that have been
modified in the kernel, to allow for security auditing.
- Allow for kernel internal use of ftrace instances. Subsystems in
the kernel can now create and destroy their own tracing instances
which allows them to have their own tracing buffer, and be able
to record events without worrying about other users from writing over
their data.
- New seq_buf_hex_dump() that lets users use the hex_dump() in their
seq_buf usage.
- Notifications now added to tracing_max_latency to allow user space
to know when a new max latency is hit by one of the latency tracers.
- Wider spread use of generic compare operations for use of bsearch and
friends.
- More synthetic event fields may be defined (32 up from 16)
- Use of xarray for architectures with sparse system calls, for the
system call trace events.
This along with small clean ups and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXdwv4BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnB5AP91vsdHQjwE1+/UWG/cO+qFtKvn2QJK
QmBRIJNH/s+1TAD/fAOhgw+ojSK3o/qc+NpvPTEW9AEwcJL1wacJUn+XbQc=
=ztql
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New tracing features:
- New PERMANENT flag to ftrace_ops when attaching a callback to a
function.
As /proc/sys/kernel/ftrace_enabled when set to zero will disable
all attached callbacks in ftrace, this has a detrimental impact on
live kernel tracing, as it disables all that it patched. If a
ftrace_ops is registered to ftrace with the PERMANENT flag set, it
will prevent ftrace_enabled from being disabled, and if
ftrace_enabled is already disabled, it will prevent a ftrace_ops
with PREMANENT flag set from being registered.
- New register_ftrace_direct().
As eBPF would like to register its own trampolines to be called by
the ftrace nop locations directly, without going through the ftrace
trampoline, this function has been added. This allows for eBPF
trampolines to live along side of ftrace, perf, kprobe and live
patching. It also utilizes the ftrace enabled_functions file that
keeps track of functions that have been modified in the kernel, to
allow for security auditing.
- Allow for kernel internal use of ftrace instances.
Subsystems in the kernel can now create and destroy their own
tracing instances which allows them to have their own tracing
buffer, and be able to record events without worrying about other
users from writing over their data.
- New seq_buf_hex_dump() that lets users use the hex_dump() in their
seq_buf usage.
- Notifications now added to tracing_max_latency to allow user space
to know when a new max latency is hit by one of the latency
tracers.
- Wider spread use of generic compare operations for use of bsearch
and friends.
- More synthetic event fields may be defined (32 up from 16)
- Use of xarray for architectures with sparse system calls, for the
system call trace events.
This along with small clean ups and fixes"
* tag 'trace-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (51 commits)
tracing: Enable syscall optimization for MIPS
tracing: Use xarray for syscall trace events
tracing: Sample module to demonstrate kernel access to Ftrace instances.
tracing: Adding new functions for kernel access to Ftrace instances
tracing: Fix Kconfig indentation
ring-buffer: Fix typos in function ring_buffer_producer
ftrace: Use BIT() macro
ftrace: Return ENOTSUPP when DYNAMIC_FTRACE_WITH_DIRECT_CALLS is not configured
ftrace: Rename ftrace_graph_stub to ftrace_stub_graph
ftrace: Add a helper function to modify_ftrace_direct() to allow arch optimization
ftrace: Add helper find_direct_entry() to consolidate code
ftrace: Add another check for match in register_ftrace_direct()
ftrace: Fix accounting bug with direct->count in register_ftrace_direct()
ftrace/selftests: Fix spelling mistake "wakeing" -> "waking"
tracing: Increase SYNTH_FIELDS_MAX for synthetic_events
ftrace/samples: Add a sample module that implements modify_ftrace_direct()
ftrace: Add modify_ftrace_direct()
tracing: Add missing "inline" in stub function of latency_fsnotify()
tracing: Remove stray tab in TRACE_EVAL_MAP_FILE's help text
tracing: Use seq_buf_hex_dump() to dump buffers
...
Here is the "big" set of driver core patches for 5.5-rc1
There's a few minor cleanups and fixes in here, but the majority of the
patches in here fall into two buckets:
- debugfs api cleanups and fixes
- driver core device link support for boot dependancy issues
The debugfs api cleanups are working to slowly refactor the debugfs apis
so that it is even harder to use incorrectly. That work has been
happening for the past few kernel releases and will continue over time,
it's a long-term project/goal
The driver core device link support missed 5.4 by just a bit, so it's
been sitting and baking for many months now. It's from Saravana Kannan
to help resolve the problems that DT-based systems have at boot time
with dependancy graphs and kernel modules. Turns out that no one has
actually tried to build a generic arm64 kernel with loads of modules and
have it "just work" for a variety of platforms (like a distro kernel)
The big problem turned out to be a lack of depandancy information
between different areas of DT entries, and the work here resolves that
problem and now allows devices to boot properly, and quicker than a
monolith kernel.
All of these patches have been in linux-next for a long time with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXd6m6Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yntJQCcCqg6RQ7LTdHuZv1ETeefXlsfk00An1Jtean6
42bWGx52bGFvAcpjWy8R
=P7hq
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core patches for 5.5-rc1
There's a few minor cleanups and fixes in here, but the majority of
the patches in here fall into two buckets:
- debugfs api cleanups and fixes
- driver core device link support for boot dependancy issues
The debugfs api cleanups are working to slowly refactor the debugfs
apis so that it is even harder to use incorrectly. That work has been
happening for the past few kernel releases and will continue over
time, it's a long-term project/goal
The driver core device link support missed 5.4 by just a bit, so it's
been sitting and baking for many months now. It's from Saravana Kannan
to help resolve the problems that DT-based systems have at boot time
with dependancy graphs and kernel modules. Turns out that no one has
actually tried to build a generic arm64 kernel with loads of modules
and have it "just work" for a variety of platforms (like a distro
kernel). The big problem turned out to be a lack of dependency
information between different areas of DT entries, and the work here
resolves that problem and now allows devices to boot properly, and
quicker than a monolith kernel.
All of these patches have been in linux-next for a long time with no
reported issues"
* tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits)
tracing: Remove unnecessary DEBUG_FS dependency
of: property: Add device link support for interrupt-parent, dmas and -gpio(s)
debugfs: Fix !DEBUG_FS debugfs_create_automount
of: property: Add device link support for "iommu-map"
of: property: Fix the semantics of of_is_ancestor_of()
i2c: of: Populate fwnode in of_i2c_get_board_info()
drivers: base: Fix Kconfig indentation
firmware_loader: Fix labels with comma for builtin firmware
driver core: Allow device link operations inside sync_state()
driver core: platform: Declare ret variable only once
cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h>
crypto: hisilicon: no need to check return value of debugfs_create functions
driver core: platform: use the correct callback type for bus_find_device
firmware_class: make firmware caching configurable
driver core: Clarify documentation for fwnode_operations.add_links()
mailbox: tegra: Fix superfluous IRQ error message
net: caif: Fix debugfs on 64-bit platforms
mac80211: Use debugfs_create_xul() helper
media: c8sectpfe: no need to check return value of debugfs_create functions
of: property: Add device link support for iommus, mboxes and io-channels
...
Set the unoptimized flag after confirming the code is completely
unoptimized. Without this fix, when a kprobe hits the intermediate
modified instruction (the first byte is replaced by an INT3, but
later bytes can still be a jump address operand) while unoptimizing,
it can return to the middle byte of the modified code, which causes
an invalid instruction exception in the kernel.
Usually, this is a rare case, but if we put a probe on the function
call while text patching, it always causes a kernel panic as below:
# echo p text_poke+5 > kprobe_events
# echo 1 > events/kprobes/enable
# echo 0 > events/kprobes/enable
invalid opcode: 0000 [#1] PREEMPT SMP PTI
RIP: 0010:text_poke+0x9/0x50
Call Trace:
arch_unoptimize_kprobe+0x22/0x28
arch_unoptimize_kprobes+0x39/0x87
kprobe_optimizer+0x6e/0x290
process_one_work+0x2a0/0x610
worker_thread+0x28/0x3d0
? process_one_work+0x610/0x610
kthread+0x10d/0x130
? kthread_park+0x80/0x80
ret_from_fork+0x3a/0x50
text_poke() is used for patching the code in optprobes.
This can happen even if we blacklist text_poke() and other functions,
because there is a small time window during which we show the intermediate
code to other CPUs.
[ mingo: Edited the changelog. ]
Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Fixes: 6274de4984 ("kprobes: Support delayed unoptimizing")
Link: https://lkml.kernel.org/r/157483422375.25881.13508326028469515760.stgit@devnote2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rework event_create_dir() to use an array of static data instead of
function pointers where possible.
The problem is that it would call the function pointer on module load
before parse_args(), possibly even before jump_labels were initialized.
Luckily the generated functions don't use jump_labels but it still seems
fragile. It also gets in the way of changing when we make the module map
executable.
The generated function are basically calling trace_define_field() with a
bunch of static arguments. So instead of a function, capture these
arguments in a static array, avoiding the function call.
Now there are a number of cases where the fields are dynamic (syscall
arguments, kprobes and uprobes), in which case a static array does not
work, for these we preserve the function call. Luckily all these cases
are not related to modules and so we can retain the function call for
them.
Also fix up all broken tracepoint definitions that now generate a
compile error.
Tested-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191111132458.342979914@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that there are no users of set_all_modules_text_*() left, remove
it.
While it appears nds32 uses it, it does not have STRICT_MODULE_RWX and
therefore ends up with the NOP stubs.
Tested-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Chen <deanbo422@gmail.com>
Link: https://lkml.kernel.org/r/20191111132458.284298307@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Use nanoseconds (instead of microseconds) as the unit of time in
the cpuidle core and simplify checks for disabled idle states in
the idle loop (Rafael Wysocki).
- Fix and clean up the teo cpuidle governor (Rafael Wysocki).
- Fix the cpuidle registration error code path (Zhenzhong Duan).
- Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei).
- Extend the idle injection infrastructure to be able to measure the
requested duration in nanoseconds and to allow an exit latency
limit for idle states to be specified (Daniel Lezcano).
- Fix cpufreq driver registration and clarify a comment in the
cpufreq core (Viresh Kumar).
- Add NULL checks to the show() and store() methods of sysfs
attributes exposed by cpufreq (Kai Shen).
- Update cpufreq drivers:
* Fix for a plain int as pointer warning from sparse in
intel_pstate (Jamal Shareef).
* Fix for a hardcoded number of CPUs and stack bloat in the
powernv driver (John Hubbard).
* Updates to the ti-cpufreq driver and DT files to support new
platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford,
H. Nikolaus Schaller).
* Merging of the arm_big_little and vexpress-spc drivers and
related cleanup (Sudeep Holla).
* Fix for imx's default speed grade value (Anson Huang).
* Minor cleanup of the s3c64xx driver (Nathan Chancellor).
* CPU speed bin detection fix for sun50i (Ondrej Jirman).
- Appoint Chanwoo Choi as the new devfreq maintainer.
- Update the devfreq core:
* Check NULL governor in available_governors_show sysfs to prevent
showing wrong governor information and fix a race condition
between devfreq_update_status() and trans_stat_show() (Leonard
Crestez).
* Add new 'interrupt-driven' flag for devfreq governors to allow
interrupt-driven governors to prevent the devfreq core from
polling devices for status (Dmitry Osipenko).
* Improve an error message in devfreq_add_device() (Matthias
Kaehlcke).
- Update devfreq drivers:
* tegra30 driver fixes and cleanups (Dmitry Osipenko).
* Removal of unused property from dt-binding documentation for
the exynos-bus driver (Kamil Konieczny).
* exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek
Szyprowski).
- Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL
power capping driver (Zhang Rui).
- Allow device initialization in the generic power domains (genpd)
framework to be more straightforward and clean it up (Ulf Hansson).
- Add support for adjusting OPP voltages at run time to the OPP
framework (Stephen Boyd).
- Avoid freeing memory that has never been allocated in the
hibernation core (Andy Whitcroft).
- Clean up function headers in a header file and coding style in the
wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan).
- Clean up the SmartReflex adaptive voltage scaling (AVS) driver for
ARM (Ben Dooks, Geert Uytterhoeven).
- Wrap power management documentation to fit in 80 columns (Bjorn
Helgaas).
- Add pm-graph utility entry to MAINTAINERS (Todd Brandt).
- Update the cpupower utility:
* Fix the handling of set and info subcommands (Abhishek Goel).
* Fix build warnings (Nathan Chancellor).
* Improve mperf_monitor handling (Janakarajan Natarajan).
-----BEGIN PGP SIGNATURE-----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=GJvT
-----END PGP SIGNATURE-----
Merge tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include cpuidle changes to use nanoseconds (instead of
microseconds) as the unit of time and to simplify checks for disabled
idle states in the idle loop, some cpuidle fixes and governor updates,
assorted cpufreq updates (driver updates mostly and a few core fixes
and cleanups), devfreq updates (dominated by the tegra30 driver
changes), new CPU IDs for the RAPL power capping driver, relatively
minor updates of the generic power domains (genpd) and operation
performance points (OPP) frameworks, and assorted fixes and cleanups.
There are also two maintainer information updates: Chanwoo Choi will
be maintaining the devfreq subsystem going forward and Todd Brandt is
going to maintain the pm-graph utility (created by him).
Specifics:
- Use nanoseconds (instead of microseconds) as the unit of time in
the cpuidle core and simplify checks for disabled idle states in
the idle loop (Rafael Wysocki)
- Fix and clean up the teo cpuidle governor (Rafael Wysocki)
- Fix the cpuidle registration error code path (Zhenzhong Duan)
- Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei)
- Extend the idle injection infrastructure to be able to measure the
requested duration in nanoseconds and to allow an exit latency
limit for idle states to be specified (Daniel Lezcano)
- Fix cpufreq driver registration and clarify a comment in the
cpufreq core (Viresh Kumar)
- Add NULL checks to the show() and store() methods of sysfs
attributes exposed by cpufreq (Kai Shen)
- Update cpufreq drivers:
* Fix for a plain int as pointer warning from sparse in
intel_pstate (Jamal Shareef)
* Fix for a hardcoded number of CPUs and stack bloat in the
powernv driver (John Hubbard)
* Updates to the ti-cpufreq driver and DT files to support new
platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford,
H. Nikolaus Schaller)
* Merging of the arm_big_little and vexpress-spc drivers and
related cleanup (Sudeep Holla)
* Fix for imx's default speed grade value (Anson Huang)
* Minor cleanup of the s3c64xx driver (Nathan Chancellor)
* CPU speed bin detection fix for sun50i (Ondrej Jirman)
- Appoint Chanwoo Choi as the new devfreq maintainer.
- Update the devfreq core:
* Check NULL governor in available_governors_show sysfs to prevent
showing wrong governor information and fix a race condition
between devfreq_update_status() and trans_stat_show() (Leonard
Crestez)
* Add new 'interrupt-driven' flag for devfreq governors to allow
interrupt-driven governors to prevent the devfreq core from
polling devices for status (Dmitry Osipenko)
* Improve an error message in devfreq_add_device() (Matthias
Kaehlcke)
- Update devfreq drivers:
* tegra30 driver fixes and cleanups (Dmitry Osipenko)
* Removal of unused property from dt-binding documentation for the
exynos-bus driver (Kamil Konieczny)
* exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek
Szyprowski)
- Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL
power capping driver (Zhang Rui)
- Allow device initialization in the generic power domains (genpd)
framework to be more straightforward and clean it up (Ulf Hansson)
- Add support for adjusting OPP voltages at run time to the OPP
framework (Stephen Boyd)
- Avoid freeing memory that has never been allocated in the
hibernation core (Andy Whitcroft)
- Clean up function headers in a header file and coding style in the
wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan)
- Clean up the SmartReflex adaptive voltage scaling (AVS) driver for
ARM (Ben Dooks, Geert Uytterhoeven)
- Wrap power management documentation to fit in 80 columns (Bjorn
Helgaas)
- Add pm-graph utility entry to MAINTAINERS (Todd Brandt)
- Update the cpupower utility:
* Fix the handling of set and info subcommands (Abhishek Goel)
* Fix build warnings (Nathan Chancellor)
* Improve mperf_monitor handling (Janakarajan Natarajan)"
* tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits)
PM: Wrap documentation to fit in 80 columns
cpuidle: Pass exit latency limit to cpuidle_use_deepest_state()
cpuidle: Allow idle injection to apply exit latency limit
cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks
cpuidle: teo: Avoid code duplication in conditionals
cpufreq: Register drivers only after CPU devices have been registered
cpuidle: teo: Avoid using "early hits" incorrectly
cpuidle: teo: Exclude cpuidle overhead from computations
PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch()
mmc: tmio: Avoid boilerplate code in ->runtime_suspend()
PM / Domains: Implement the ->start() callback for genpd
PM / Domains: Introduce dev_pm_domain_start()
ARM: OMAP2+: SmartReflex: add omap_sr_pdata definition
PM / wakeirq: remove unnecessary parentheses
power: avs: smartreflex: Remove superfluous cast in debugfs_create_file() call
cpuidle: Use nanoseconds as the unit of time
PM / OPP: Support adjusting OPP voltages at runtime
PM / core: Clean up some function headers in power.h
cpufreq: Add NULL checks to show() and store() methods of cpufreq
cpufreq: intel_pstate: Fix plain int as pointer warning from sparse
...
kernel/bpf/btf.c:4023 btf_distill_func_proto()
error: potentially dereferencing uninitialized 't'.
kernel/bpf/btf.c
4012 nargs = btf_type_vlen(func);
4013 if (nargs >= MAX_BPF_FUNC_ARGS) {
4014 bpf_log(log,
4015 "The function %s has %d arguments. Too many.\n",
4016 tname, nargs);
4017 return -EINVAL;
4018 }
4019 ret = __get_type_size(btf, func->type, &t);
^^
t isn't initialized for the first -EINVAL return
This is unlikely path, since BTF should have been validated at this point.
Fix it by returning 'void' BTF.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191126230106.237179-1-ast@kernel.org
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- A comprehensive rewrite of the robust/PI futex code's exit handling
to fix various exit races. (Thomas Gleixner et al)
- Rework the generic REFCOUNT_FULL implementation using
atomic_fetch_* operations so that the performance impact of the
cmpxchg() loops is mitigated for common refcount operations.
With these performance improvements the generic implementation of
refcount_t should be good enough for everybody - and this got
confirmed by performance testing, so remove ARCH_HAS_REFCOUNT and
REFCOUNT_FULL entirely, leaving the generic implementation enabled
unconditionally. (Will Deacon)
- Other misc changes, fixes, cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
lkdtm: Remove references to CONFIG_REFCOUNT_FULL
locking/refcount: Remove unused 'refcount_error_report()' function
locking/refcount: Consolidate implementations of refcount_t
locking/refcount: Consolidate REFCOUNT_{MAX,SATURATED} definitions
locking/refcount: Move saturation warnings out of line
locking/refcount: Improve performance of generic REFCOUNT_FULL code
locking/refcount: Move the bulk of the REFCOUNT_FULL implementation into the <linux/refcount.h> header
locking/refcount: Remove unused refcount_*_checked() variants
locking/refcount: Ensure integer operands are treated as signed
locking/refcount: Define constants for saturation and max refcount values
futex: Prevent exit livelock
futex: Provide distinct return value when owner is exiting
futex: Add mutex around futex exit
futex: Provide state handling for exec() as well
futex: Sanitize exit state handling
futex: Mark the begin of futex exit explicitly
futex: Set task::futex_state to DEAD right after handling futex exit
futex: Split futex_mm_release() for exit/exec
exit/exec: Seperate mm_release()
futex: Replace PF_EXITPIDONE with a state
...
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:
- Dynamic tick (nohz) updates, perhaps most notably changes to force
the tick on when needed due to lengthy in-kernel execution on CPUs
on which RCU is waiting.
- Linux-kernel memory consistency model updates.
- Replace rcu_swap_protected() with rcu_prepace_pointer().
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
security/safesetid: Replace rcu_swap_protected() with rcu_replace_pointer()
net/sched: Replace rcu_swap_protected() with rcu_replace_pointer()
net/netfilter: Replace rcu_swap_protected() with rcu_replace_pointer()
net/core: Replace rcu_swap_protected() with rcu_replace_pointer()
bpf/cgroup: Replace rcu_swap_protected() with rcu_replace_pointer()
fs/afs: Replace rcu_swap_protected() with rcu_replace_pointer()
drivers/scsi: Replace rcu_swap_protected() with rcu_replace_pointer()
drm/i915: Replace rcu_swap_protected() with rcu_replace_pointer()
x86/kvm/pmu: Replace rcu_swap_protected() with rcu_replace_pointer()
rcu: Upgrade rcu_swap_protected() to rcu_replace_pointer()
rcu: Suppress levelspread uninitialized messages
rcu: Fix uninitialized variable in nocb_gp_wait()
rcu: Update descriptions for rcu_future_grace_period tracepoint
rcu: Update descriptions for rcu_nocb_wake tracepoint
rcu: Remove obsolete descriptions for rcu_barrier tracepoint
rcu: Ensure that ->rcu_urgent_qs is set before resched IPI
workqueue: Convert for_each_wq to use built-in list check
rcu: Several rcu_segcblist functions can be static
rcu: Remove unused function hlist_bl_del_init_rcu()
Documentation: Rename rcu_node_context_switch() to rcu_note_context_switch()
...
Pull scheduler updates from Ingo Molnar:
"The biggest changes in this cycle were:
- Make kcpustat vtime aware (Frederic Weisbecker)
- Rework the CFS load_balance() logic (Vincent Guittot)
- Misc cleanups, smaller enhancements, fixes.
The load-balancing rework is the most intrusive change: it replaces
the old heuristics that have become less meaningful after the
introduction of the PELT metrics, with a grounds-up load-balancing
algorithm.
As such it's not really an iterative series, but replaces the old
load-balancing logic with the new one. We hope there are no
performance regressions left - but statistically it's highly probable
that there *is* going to be some workload that is hurting from these
chnages. If so then we'd prefer to have a look at that workload and
fix its scheduling, instead of reverting the changes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
rackmeter: Use vtime aware kcpustat accessor
leds: Use all-in-one vtime aware kcpustat accessor
cpufreq: Use vtime aware kcpustat accessors for user time
procfs: Use all-in-one vtime aware kcpustat accessor
sched/vtime: Bring up complete kcpustat accessor
sched/cputime: Support other fields on kcpustat_field()
sched/cpufreq: Move the cfs_rq_util_change() call to cpufreq_update_util()
sched/fair: Add comments for group_type and balancing at SD_NUMA level
sched/fair: Fix rework of find_idlest_group()
sched/uclamp: Fix overzealous type replacement
sched/Kconfig: Fix spelling mistake in user-visible help text
sched/core: Further clarify sched_class::set_next_task()
sched/fair: Use mul_u32_u32()
sched/core: Simplify sched_class::pick_next_task()
sched/core: Optimize pick_next_task()
sched/core: Make pick_next_task_idle() more consistent
sched/fair: Better document newidle_balance()
leds: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
cpufreq: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
procfs: Use vtime aware kcpustat accessor to fetch CPUTIME_SYSTEM
...
Pull perf updates from Ingo Molnar:
"The main kernel side changes in this cycle were:
- Various Intel-PT updates and optimizations (Alexander Shishkin)
- Prohibit kprobes on Xen/KVM emulate prefixes (Masami Hiramatsu)
- Add support for LSM and SELinux checks to control access to the
perf syscall (Joel Fernandes)
- Misc other changes, optimizations, fixes and cleanups - see the
shortlog for details.
There were numerous tooling changes as well - 254 non-merge commits.
Here are the main changes - too many to list in detail:
- Enhancements to core tooling infrastructure, perf.data, libperf,
libtraceevent, event parsing, vendor events, Intel PT, callchains,
BPF support and instruction decoding.
- There were updates to the following tools:
perf annotate
perf diff
perf inject
perf kvm
perf list
perf maps
perf parse
perf probe
perf record
perf report
perf script
perf stat
perf test
perf trace
- And a lot of other changes: please see the shortlog and Git log for
more details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (279 commits)
perf parse: Fix potential memory leak when handling tracepoint errors
perf probe: Fix spelling mistake "addrees" -> "address"
libtraceevent: Fix memory leakage in copy_filter_type
libtraceevent: Fix header installation
perf intel-bts: Does not support AUX area sampling
perf intel-pt: Add support for decoding AUX area samples
perf intel-pt: Add support for recording AUX area samples
perf pmu: When using default config, record which bits of config were changed by the user
perf auxtrace: Add support for queuing AUX area samples
perf session: Add facility to peek at all events
perf auxtrace: Add support for dumping AUX area samples
perf inject: Cut AUX area samples
perf record: Add aux-sample-size config term
perf record: Add support for AUX area sampling
perf auxtrace: Add support for AUX area sample recording
perf auxtrace: Move perf_evsel__find_pmu()
perf record: Add a function to test for kernel support for AUX area sampling
perf tools: Add kernel AUX area sampling definitions
perf/core: Make the mlock accounting simple again
perf report: Jump to symbol source view from total cycles view
...
Pull stacktrace cleanup from Ingo Molnar:
"A minor cleanup"
* 'core-stacktrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stacktrace: Get rid of unneeded '!!' pattern
This system call has been deprecated almost since it was introduced, and
in a survey of the linux distributions I can no longer find any of them
that enable CONFIG_SYSCTL_SYSCALL. The only indication that I can find
that anyone might care is that a few of the defconfigs in the kernel
enable CONFIG_SYSCTL_SYSCALL. However this appears in only 31 of 414
defconfigs in the kernel, so I suspect this symbols presence is simply
because it is harmless to include rather than because it is necessary.
As there appear to be no users of the sysctl system call, remove the
code. As this removes one of the few uses of the internal kernel mount
of proc I hope this allows for even more simplifications of the proc
filesystem.
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Anders Berg <anders.berg@lsi.com>
Cc: Apelete Seketeli <apelete@seketeli.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chee Nouk Phoon <cnphoon@altera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hongliang Tao <taohl@lemote.com>
Cc: Hua Yan <yanh@lemote.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Kevin Wells <kevin.wells@nxp.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Scott Telford <stelford@cadence.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* pm-sleep:
PM / wakeirq: remove unnecessary parentheses
PM / core: Clean up some function headers in power.h
PM / hibernate: memory_bm_find_bit(): Tighten node optimisation
* pm-domains:
PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch()
mmc: tmio: Avoid boilerplate code in ->runtime_suspend()
PM / Domains: Implement the ->start() callback for genpd
PM / Domains: Introduce dev_pm_domain_start()
* pm-opp:
PM / OPP: Support adjusting OPP voltages at runtime
* powercap:
powercap/intel_rapl: add support for Cometlake desktop
powercap/intel_rapl: add support for CometLake Mobile
* pm-cpuidle:
cpuidle: Pass exit latency limit to cpuidle_use_deepest_state()
cpuidle: Allow idle injection to apply exit latency limit
cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks
cpuidle: teo: Avoid code duplication in conditionals
cpuidle: teo: Avoid using "early hits" incorrectly
cpuidle: teo: Exclude cpuidle overhead from computations
cpuidle: Use nanoseconds as the unit of time
cpuidle: Consolidate disabled state checks
ACPI: processor_idle: Skip dummy wait if kernel is in guest
cpuidle: Do not unset the driver if it is there already
cpuidle: teo: Fix "early hits" handling for disabled idle states
cpuidle: teo: Consider hits and misses metrics of disabled states
cpuidle: teo: Rename local variable in teo_select()
cpuidle: teo: Ignore disabled idle states that are too deep
Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:
1) Support alternative names for network devices, from Jiri Pirko.
2) Introduce per-netns netdev notifiers, also from Jiri Pirko.
3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
Larsen.
4) Allow compiling out the TLS TOE code, from Jakub Kicinski.
5) Add several new tracepoints to the kTLS code, also from Jakub.
6) Support set channels ethtool callback in ena driver, from Sameeh
Jubran.
7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.
8) Add XDP support to mvneta driver, from Lorenzo Bianconi.
9) Lots of netfilter hw offload fixes, cleanups and enhancements,
from Pablo Neira Ayuso.
10) PTP support for aquantia chips, from Egor Pomozov.
11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
Josh Hunt.
12) Add smart nagle to tipc, from Jon Maloy.
13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
Duvvuru.
14) Add a flow mask cache to OVS, from Tonghao Zhang.
15) Add XDP support to ice driver, from Maciej Fijalkowski.
16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.
17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.
18) Support it in stmmac driver too, from Jose Abreu.
19) Support TIPC encryption and auth, from Tuong Lien.
20) Introduce BPF trampolines, from Alexei Starovoitov.
21) Make page_pool API more numa friendly, from Saeed Mahameed.
22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.
23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
libbpf: Fix usage of u32 in userspace code
mm: Implement no-MMU variant of vmalloc_user_node_flags
slip: Fix use-after-free Read in slip_open
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
macvlan: schedule bc_work even if error
enetc: add support Credit Based Shaper(CBS) for hardware offload
net: phy: add helpers phy_(un)lock_mdio_bus
mdio_bus: don't use managed reset-controller
ax88179_178a: add ethtool_op_get_ts_info()
mlxsw: spectrum_router: Fix use of uninitialized adjacency index
mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
bpf: Simplify __bpf_arch_text_poke poke type handling
bpf: Introduce BPF_TRACE_x helper for the tracing tests
bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
bpf, testing: Add various tail call test cases
bpf, x86: Emit patchable direct jump as tail call
bpf: Constant map key tracking for prog array pokes
bpf: Add poke dependency tracking for prog array maps
bpf: Add initial poke descriptor table for jit images
bpf: Move owner type, jited info into array auxiliary data
...
-----BEGIN PGP SIGNATURE-----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=i37E
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- New API to track system state changes done be livepatch callbacks. It
helps to maintain compatibility between livepatches.
- Update Kconfig help text. ORC is another reliable unwinder.
- Disable generic selftest timeout. Livepatch selftests have their own
per-operation fine-grained timeouts.
* tag 'livepatching-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
x86/stacktrace: update kconfig help text for reliable unwinders
livepatch: Selftests of the API for tracking system state changes
livepatch: Documentation of the new API for tracking system state changes
livepatch: Allow to distinguish different version of system state changes
livepatch: Basic API to track system state changes
livepatch: Keep replaced patches until post_patch callback is called
selftests/livepatch: Disable the timeout
-----BEGIN PGP SIGNATURE-----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=QCEy
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow to print symbolic error names via new %pe modifier.
- Use pr_warn() instead of the remaining pr_warning() calls. Fix
formatting of the related lines.
- Add VSPRINTF entry to MAINTAINERS.
* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
checkpatch: don't warn about new vsprintf pointer extension '%pe'
MAINTAINERS: Add VSPRINTF
tools lib api: Renaming pr_warning to pr_warn
ASoC: samsung: Use pr_warn instead of pr_warning
lib: cpu_rmap: Use pr_warn instead of pr_warning
trace: Use pr_warn instead of pr_warning
dma-debug: Use pr_warn instead of pr_warning
vgacon: Use pr_warn instead of pr_warning
fs: afs: Use pr_warn instead of pr_warning
sh/intc: Use pr_warn instead of pr_warning
scsi: Use pr_warn instead of pr_warning
platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
platform/x86: asus-laptop: Use pr_warn instead of pr_warning
platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
oprofile: Use pr_warn instead of pr_warning
of: Use pr_warn instead of pr_warning
macintosh: Use pr_warn instead of pr_warning
idsn: Use pr_warn instead of pr_warning
ide: Use pr_warn instead of pr_warning
crypto: n2: Use pr_warn instead of pr_warning
...
Pull cgroup updates from Tejun Heo:
"There are several notable changes here:
- Single thread migrating itself has been optimized so that it
doesn't need threadgroup rwsem anymore.
- Freezer optimization to avoid unnecessary frozen state changes.
- cgroup ID unification so that cgroup fs ino is the only unique ID
used for the cgroup and can be used to directly look up live
cgroups through filehandle interface on 64bit ino archs. On 32bit
archs, cgroup fs ino is still the only ID in use but it is only
unique when combined with gen.
- selftest and other changes"
* 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits)
writeback: fix -Wformat compilation warnings
docs: cgroup: mm: Fix spelling of "list"
cgroup: fix incorrect WARN_ON_ONCE() in cgroup_setup_root()
cgroup: use cgrp->kn->id as the cgroup ID
kernfs: use 64bit inos if ino_t is 64bit
kernfs: implement custom exportfs ops and fid type
kernfs: combine ino/id lookup functions into kernfs_find_and_get_node_by_id()
kernfs: convert kernfs_node->id from union kernfs_node_id to u64
kernfs: kernfs_find_and_get_node_by_ino() should only look up activated nodes
kernfs: use dumber locking for kernfs_find_and_get_node_by_ino()
netprio: use css ID instead of cgroup ID
writeback: use ino_t for inodes in tracepoints
kernfs: fix ino wrap-around detection
kselftests: cgroup: Avoid the reuse of fd after it is deallocated
cgroup: freezer: don't change task and cgroups status unnecessarily
cgroup: use cgroup->last_bstat instead of cgroup->bstat_pending for consistency
cgroup: remove cgroup_enable_task_cg_lists() optimization
cgroup: pids: use atomic64_t for pids->limit
selftests: cgroup: Run test_core under interfering stress
selftests: cgroup: Add task migration tests
...
Pull workqueue updates from Tejun Heo:
"There have been sporadic reports of sanity checks in
destroy_workqueue() failing spuriously over the years. This contains
the fix and its follow-up changes / fixes.
There's also a RCU annotation improvement"
* 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Add RCU annotation for pwq list walk
workqueue: Fix pwq ref leak in rescuer_thread()
workqueue: more destroy_workqueue() fixes
workqueue: Minor follow-ups to the rescuer destruction change
workqueue: Fix missing kfree(rescuer) in destroy_workqueue()
workqueue: Fix spurious sanity check failures in destroy_workqueue()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXdfjBwAKCRCRxhvAZXjc
onCBAP47WZ/ie7yjoDWhOI1QB7II3NGSzToakxpgJaWoB+NjTwEA7PGrSYVEbPrf
pUhiEaEJ29t+cWUxX3+yDO+k7SA6BAY=
=Ra58
-----END PGP SIGNATURE-----
Merge tag 'threads-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread management updates from Christian Brauner:
- A pidfd's fdinfo file currently contains the field "Pid:\t<pid>"
where <pid> is the pid of the process in the pid namespace of the
procfs instance the fdinfo file for the pidfd was opened in.
The fdinfo file has now gained a new "NSpid:\t<ns-pid1>[\t<ns-pid2>[...]]"
field which lists the pids of the process in all child pid namespaces
provided the pid namespace of the procfs instance it is looked up
under has an ancestoral relationship with the pid namespace of the
process. If it does not 0 will be shown and no further pid namespaces
will be listed. Tests included. (Christian Kellner)
- If the process the pidfd references has already exited, print -1 for
the Pid and NSpid fields in the pidfd's fdinfo file. Tests included.
(me)
- Add CLONE_CLEAR_SIGHAND. This lets callers clear all signal handler
that are not SIG_DFL or SIG_IGN at process creation time. This
originated as a feature request from glibc to improve performance and
elimate races in their posix_spawn() implementation. Tests included.
(me)
- Add support for choosing a specific pid for a process with clone3().
This is the feature which was part of the thread update for v5.4 but
after a discussion at LPC in Lisbon we decided to delay it for one
more cycle in order to make the interface more generic. This has now
done. It is now possible to choose a specific pid in a whole pid
namespaces (sub)hierarchy instead of just one pid namespace. In order
to choose a specific pid the caller must have CAP_SYS_ADMIN in all
owning user namespaces of the target pid namespaces. Tests included.
(Adrian Reber)
- Test improvements and extensions. (Andrei Vagin, me)
* tag 'threads-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: skip if clone3() is ENOSYS
selftests/clone3: check that all pids are released on error paths
selftests/clone3: report a correct number of fails
selftests/clone3: flush stdout and stderr before clone3() and _exit()
selftests: add tests for clone3() with *set_tid
fork: extend clone3() to support setting a PID
selftests: add tests for clone3()
tests: test CLONE_CLEAR_SIGHAND
clone3: add CLONE_CLEAR_SIGHAND
pid: use pid_has_task() in pidfd_open()
exit: use pid_has_task() in do_wait()
pid: use pid_has_task() in __change_pid()
test: verify fdinfo for pidfd of reaped process
pidfd: check pid has attached task in fdinfo
pidfd: add tests for NSpid info in fdinfo
pidfd: add NSpid entries to fdinfo
- Data abort report and injection
- Steal time support
- GICv4 performance improvements
- vgic ITS emulation fixes
- Simplify FWB handling
- Enable halt polling counters
- Make the emulated timer PREEMPT_RT compliant
s390:
- Small fixes and cleanups
- selftest improvements
- yield improvements
PPC:
- Add capability to tell userspace whether we can single-step the guest.
- Improve the allocation of XIVE virtual processor IDs
- Rewrite interrupt synthesis code to deliver interrupts in virtual
mode when appropriate.
- Minor cleanups and improvements.
x86:
- XSAVES support for AMD
- more accurate report of nested guest TSC to the nested hypervisor
- retpoline optimizations
- support for nested 5-level page tables
- PMU virtualization optimizations, and improved support for nested
PMU virtualization
- correct latching of INITs for nested virtualization
- IOAPIC optimization
- TSX_CTRL virtualization for more TAA happiness
- improved allocation and flushing of SEV ASIDs
- many bugfixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJd27PMAAoJEL/70l94x66DspsH+gPc6YWtKJFJH58Zj8NrNh6y
t0FwDFcvUa51+m4jaY4L5Y8+zqu1dZFnPPhFGqNWpxrjCEvE/glQJv3BiUX06Seh
aYUHNymGoYCTJOHaaGhV+NlgQaDuZOCOkIsOLAPehyFd1KojwB+FRC0xmO6aROPw
9yQgYrKuK1UUn5HwxBNrMS4+Xv+2iKv/9sTnq1G4W2qX2NZQg84LVPg1zIdkCh3D
3GOvoCBEk3ivQqjmdE7rP/InPr0XvW0b6TFhchIk8J6jEIQFHsmOUefiTvTxsIHV
OKAZwvyeYPrYHA/aDZpaBmY2aR0ydfKDUQcviNIJoF1vOktGs0hvl3VbsmG8QCg=
=OSI1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- data abort report and injection
- steal time support
- GICv4 performance improvements
- vgic ITS emulation fixes
- simplify FWB handling
- enable halt polling counters
- make the emulated timer PREEMPT_RT compliant
s390:
- small fixes and cleanups
- selftest improvements
- yield improvements
PPC:
- add capability to tell userspace whether we can single-step the
guest
- improve the allocation of XIVE virtual processor IDs
- rewrite interrupt synthesis code to deliver interrupts in virtual
mode when appropriate.
- minor cleanups and improvements.
x86:
- XSAVES support for AMD
- more accurate report of nested guest TSC to the nested hypervisor
- retpoline optimizations
- support for nested 5-level page tables
- PMU virtualization optimizations, and improved support for nested
PMU virtualization
- correct latching of INITs for nested virtualization
- IOAPIC optimization
- TSX_CTRL virtualization for more TAA happiness
- improved allocation and flushing of SEV ASIDs
- many bugfixes and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
kvm: nVMX: Relax guest IA32_FEATURE_CONTROL constraints
KVM: x86: Grab KVM's srcu lock when setting nested state
KVM: x86: Open code shared_msr_update() in its only caller
KVM: Fix jump label out_free_* in kvm_init()
KVM: x86: Remove a spurious export of a static function
KVM: x86: create mmu/ subdirectory
KVM: nVMX: Remove unnecessary TLB flushes on L1<->L2 switches when L1 use apic-access-page
KVM: x86: remove set but not used variable 'called'
KVM: nVMX: Do not mark vmcs02->apic_access_page as dirty when unpinning
KVM: vmx: use MSR_IA32_TSX_CTRL to hard-disable TSX on guest that lack it
KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality
KVM: x86: implement MSR_IA32_TSX_CTRL effect on CPUID
KVM: x86: do not modify masked bits of shared MSRs
KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES
KVM: PPC: Book3S HV: XIVE: Fix potential page leak on error path
KVM: PPC: Book3S HV: XIVE: Free previous EQ page when setting up a new one
KVM: nVMX: Assume TLB entries of L1 and L2 are tagged differently if L0 use EPT
KVM: x86: Unexport kvm_vcpu_reload_apic_access_page()
KVM: nVMX: add CR4_LA57 bit to nested CR4_FIXED1
KVM: nVMX: Use semi-colon instead of comma for exit-handlers initialization
...
